Готові списки джерел за темами / Optical benches

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Optical benches"

Автор: Grafiati

Опубліковано: 10 березня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Optical benches".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Optical benches"

Liu, Jiyuan, and Ichirou Yamaguchi. "Surface profilometry with laser-diode optical feedback interferometer outside optical benches." Applied Optics 39, no. 1 (January 1, 2000): 104. http://dx.doi.org/10.1364/ao.39.000104.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chu, A. K., Z. Y. Tsai, Y. T. Chen, and J. H. Chiang. "Thin WDM filters for low-cost optical triplexers on silicon optical benches." Electronics Letters 44, no. 15 (2008): 929. http://dx.doi.org/10.1049/el:20081358.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Duncker, Hannes, Ortwin Hellmig, André Wenzlawski, Alexander Grote, Amir Jones Rafipoor, Mona Rafipoor, Klaus Sengstock, and Patrick Windpassinger. "Ultrastable, Zerodur-based optical benches for quantum gas experiments." Applied Optics 53, no. 20 (July 4, 2014): 4468. http://dx.doi.org/10.1364/ao.53.004468.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Clévy, Cédric, Ion Lungu, Kanty Rabenorosoa, and Philippe Lutz. "Positioning accuracy characterization of assembled microscale components for micro-optical benches." Assembly Automation 34, no. 1 (January 28, 2014): 69–77. http://dx.doi.org/10.1108/aa-02-2013-011.

Повний текст джерела

Анотація:

Purpose – This paper aims to deal with the measurement of positioning accuracies of microscale components assembled to fabricate micro-optical benches (MOB). Design/methodology/approach – The concept of MOB is presented to explain how to fabricate optical MEMS based on out-of-plane micro-assembly of microcomponents. This micro-assembly platform includes a laser sensor that enables to measure the position of the microcomponent after its assembly. The measurement set-up and procedure is displayed and applied on several micro-assembly sets. Findings – The measurement system provides results with maximum deviation smaller than ±0.005°. Based on this measurement system and micro-assembly procedure displayed in the article, it is shown that it is possible to obtain a positioning accuracy up to 0.009°. Originality/value – These results clearly show that micro-assembly is a possible way to fabricate complex, heterogeneous and 3D optical MEMS with very good optical performances.

Стилі APA, Harvard, Vancouver, ISO та ін.

van Heijningen, J. V., A. Bertolini, E. Hennes, M. G. Beker, M. Doets, H. J. Bulten, K. Agatsuma, T. Sekiguchi, and J. F. J. van den Brand. "A multistage vibration isolation system for Advanced Virgo suspended optical benches." Classical and Quantum Gravity 36, no. 7 (March 11, 2019): 075007. http://dx.doi.org/10.1088/1361-6382/ab075e.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Avgitas, Theodore, Alexandre Creusot, and Antoine Kouchner. "Characterization benches for neutrino telescope Optical Modules at the APC laboratory." EPJ Web of Conferences 116 (2016): 06007. http://dx.doi.org/10.1051/epjconf/201611606007.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lee, Kook-Nyung, Yun-Ho Jang, Hoseong Kim, Yoon-Sik Lee, and Yong-Kweon Kim. "Monolithic fabrication of optical benches and scanning mirror using silicon bulk micromachining." Journal of Micromechanics and Microengineering 15, no. 4 (February 15, 2005): 747–55. http://dx.doi.org/10.1088/0960-1317/15/4/011.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

LEE, HEE-GOOK, JAE YEONG PARK, JONG UK BU, and YOUNGJOO YEE. "MEMS TECHNOLOGY FOR ADVANCED TELECOMMUNICATION APPLICATIONS." International Journal of High Speed Electronics and Systems 12, no. 02 (June 2002): 215–33. http://dx.doi.org/10.1142/s0129156402001162.

Повний текст джерела

Анотація:

MEMS (Micro Electro Mechanical Systems) technology is becoming a crucial enabling technology for optical and RF telecommunication applications due to the performance, cost and integration advantages. All-optical switches and silicon optical benches for optical network systems and RF MEMS components such as RF MEMS switches, tunable capacitors, high Q inductors, and thin film bulk acoustic resonators for miniaturized single chip RF transceivers are discussed. Despite all the promising aspects, practical problems to be addressed for successful commercialization are not trivial. By reviewing optical and RF MEMS research activities and some of the implementation examples, key success factors of MEMS components for the commercialization are discussed.

Стилі APA, Harvard, Vancouver, ISO та ін.

KUNIEDA, Hideyo. "Challenges of X-ray Astronomy : Breakthrough with Extensible Optical Benches and Formation Flying." Journal of the Society of Mechanical Engineers 112, no. 1082 (2009): 20–23. http://dx.doi.org/10.1299/jsmemag.112.1082_20.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rakhmanov, V. V., S. V. Dvoynishnikov, V. G. Meledin, V. A. Pavlov, and D. O. Semenov. "Application features of micro-pixel avalanche photodetectors in the laser Doppler anemometers." Journal of Physics: Conference Series 2057, no. 1 (October 1, 2021): 012088. http://dx.doi.org/10.1088/1742-6596/2057/1/012088.

Повний текст джерела

Анотація:

Abstract The optical receiver is an essential part of any laser Doppler anemometer. Traditionally, vacuum photomultiplier tubes are used for reliable reception of weak optical radiation. However, this type of photodetector has its own drawbacks, which lead to a design complication and an increase in the cost of LDA. In this work, the characteristics of silicon micropixel avalanche photodiodes are investigated and the operation of a silicon photomultiplier as a photodetector in an LDA is tested when measuring the velocity on test benches. The possibility of using Si-PMT to receive optical signals of the laser Doppler anemometer is shown.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Optical benches"

Lo, Chi Chuen. "Integrated silicon optical bench with passive alignment features for three-dimensional optical interconnect /." View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?MECH%202004%20LO.

Повний текст джерела

Анотація:

Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2004.
Includes bibliographical references (leaves 118-122). Also available in electronic version. Access restricted to campus users.

Стилі APA, Harvard, Vancouver, ISO та ін.

Wintr, Aleš. "Měření parametrů optických čoček." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219103.

Повний текст джерела

Анотація:

This paper contains a basic overview and description of optical lenses. It introduces different types of optical lenses and shows how they influence the passing of light beams. It deals with the production of optical lenses and their practical use. It describes types of optical blemishes that exist in real optical systems. Particular attention is given to parameters of optical lenses and their measurement in practice. It includes a Matlab program to calculate parameters of optical lenses derived from the measurements.

Стилі APA, Harvard, Vancouver, ISO та ін.

Diekmann, Christian [Verfasser]. "Development of core elements for the LISA optical bench : electro-optical measurement systems and test devices / Christian Diekmann." Hannover : Technische Informationsbibliothek und Universitätsbibliothek Hannover (TIB), 2013. http://d-nb.info/103651188X/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Shih-Chi 1977. "A six-degree-of-freedom compliant micro-manipulator for silicon optical bench." Thesis, Massachusetts Institute of Technology, 2003. http://hdl.handle.net/1721.1/89396.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

SECCO, GIOEL GABRIO. "Optical Coherence Tomography, from bench to bedside: shining the light during percutaneous vascular intervention." Doctoral thesis, Università del Piemonte Orientale, 2015. http://hdl.handle.net/11579/81665.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kreiß, Lucas [Verfasser], Oliver [Akademischer Betreuer] Friedrich, and Maximilian [Gutachter] Waldner. "Advanced Optical Technologies for Label-free Tissue Diagnostics - A complete workflow from the optical bench, over experimental studies to data analysis / Lucas Kreiß ; Gutachter: Maximilian Waldner ; Betreuer: Oliver Friedrich." Erlangen : Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU), 2021. http://d-nb.info/1228627568/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lieser, Maike Danielle [Verfasser]. "LISA optical bench development : experimental investigation of tilt-to-length coupling for a spaceborne gravitational wave detector / Maike Danielle Lieser." Hannover : Technische Informationsbibliothek (TIB), 2017. http://d-nb.info/1169964109/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Lieser, Maike [Verfasser]. "LISA optical bench development : experimental investigation of tilt-to-length coupling for a spaceborne gravitational wave detector / Maike Danielle Lieser." Hannover : Technische Informationsbibliothek (TIB), 2017. http://d-nb.info/1169964109/34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ciubotariu, Dragos. "Design, Modeling, Fabrication and Control of PMN-PT Piezoelectric Systems." Thesis, Besançon, 2016. http://www.theses.fr/2016BESA2048/document.

Повний текст джерела

Анотація:

Ce travail propose l’utilisation d’un nouveau matériau, appelé PMN-PT, qui continue aider la miniaturisation des systèmes complexes, utilisés dans des différentes technologies. Le travail est présenté dans le cadre de collaboration entre deux projets, MIOP et ADMAN. Les besoins tient compte que les actionneurs soient capables de délivrer de haute déplacement tout en conservant la simplicité et la fiabilité du système. L’accent est mis sur la polyvalence de ce matériau piézo-électrique, PMN-PT, en raison de ses propriétés électro-mécanique. Le travail comprend un aperçu sur quoi influence les propriétés électro-mécaniques du PMN-PT. L’accent est mis sur deux différentes, mais très puissants coupes: anisotrope [011] et longitudinale [001], choisi pour grand déplacement et haute dynamique avec un volume petit. Pour le PMN-PT[001], une structure de type poutre a été étudié, avec un modèle amélioré pour prendre en compte les spécificités de matériel. Les déplacements et forces ont été trouvés d’ être supérieur `a un actionneur en PZT, similairement dimensionnée, tandis que avoir des non-linéarités réduites. Ceci est illustré avec une micro pince avec 6DDL. L’étude de PMN-PT [001] coupé longitudinal suit. Cette étude a été fait en utilisant PMNPT comme un actionneur avec une structure simple, facile à intégrer. Les résultats démontrent les améliorations PMN-PT peut apporter à micro-spectrométrie et la correction d’image avec des micromiroirmobiles. Un micro actionneur PMN-PT a été intégré dans une structure compatible avec des MOEMS et présenté
This work proposes the use of a novel material, called PMN-PT, that futher aids the miniaturizationof complex systems used in different technologies. The work is presented within the collaborativeframework of two projects, MIOP and ADMAN. The end-needs account for actuators capable ofdelivering high displacement, while maintaining system simplicity and reliability. The focus is onthe versatility of the PMN-PT piezoelectric material, due to its electro-mechanical properties. Thework includes an overview on what influences the electro-mechanical properties focusing on twodifferent, though very potent cuts: anisotropic [011] and longitudinal [001]. They were chosen forgenerating large displacement and high dynamics with small volume. For PMN-PT[001] a cantileverstructure was studied, for which the model was improved taking into account the material specificities.Displacements and forces were found to be superior to a similarly dimensioned PZT actuator, whilsthaving reduced non-linearities. This is exemplified with a 6 DoF capable microgripper. The PMNPT[001] longitudinal cut based actuator study follows. This is done by using PMN-PT as a simple,easy to integrate, bulk actuator. The findings demonstrate the improvements PMN-PT can bringto micro-spectrometry and image correction with micro-mirror displacement. A bulk PMN-PT microactuator was integrated into a MOEMS compatible structure and presented

Стилі APA, Harvard, Vancouver, ISO та ін.

Baldwin, Dan, Andrew Szentgyorgyi, Stuart Barnes, Jacob Bean, Sagi Ben-Ami, Patricia Brennan, Jamie Budynkiewicz, et al. "Advanced structural design for precision radial velocity instruments." SPIE-INT SOC OPTICAL ENGINEERING, 2016. http://hdl.handle.net/10150/622418.

Повний текст джерела

Анотація:

The GMT-Consortium Large Earth Finder (G-CLEF) is an echelle spectrograph with precision radial velocity (PRV) capability that will be a first light instrument for the Giant Magellan Telescope (GMT). G-CLEF has a PRV precision goal of 40 cm/sec (10 cm/s for multiple measurements) to enable detection of Earth-like exoplanets in the habitable zones of sun-like stars'. This precision is a primary driver of G-CLEF's structural design. Extreme stability is necessary to minimize image motions at the CCD detectors. Minute changes in temperature, pressure, and acceleration environments cause structural deformations, inducing image motions which degrade PRV precision. The instrument's structural design will ensure that the PRV goal is achieved under the environments G-CLEF will be subjected to as installed on the GMT azimuth platform, including: Millikelvin (0.001 K) thermal soaks and gradients 10 millibar changes in ambient pressure Changes in acceleration due to instrument tip/tilt and telescope slewing Carbon fiber/cyanate composite was selected for the optical bench structure in order to meet performance goals. Low coefficient of thermal expansion (C 1E) and high stiffness-to-weight are key features of the composite optical bench design. Manufacturability and serviceability of the instrument are also drivers of the design. In this paper, we discuss analyses leading to technical choices made to minimize G-CLEF's sensitivity to changing environments. Finite element analysis (FEA) and image motion sensitivity studies were conducted to determine PRV performance under operational environments. We discuss the design of the optical bench structure to optimize stiffness to -weight and minimize deformations due to inertial and pressure effects. We also discuss quasi-kinematic mounting of optical elements and assemblies, and optimization of these to ensure minimal image motion under thermal, pressure, and inertial loads expected during PRV observations.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Optical benches"

Masahiro, Miyazaki. Sumitomo Denkō, kigyōnai benchā: Dokyumento. Tōkyō: Kanki Shuppan, 1985.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Metec, Ltd. Virtual Optical Bench: Student Version. Jones & Bartlett Pub, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Metec, Ltd. Virtual Optical Bench: Academic Version. Jones & Bartlett Pub, 1997.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Optical Imaging: Fourth Inter-Institute Workshop on Optical Diagnostic Imaging from Bench to Bedside at the National Institutes of Heal (Proceedings of Spie on CD-ROM). SPIE-International Society for Optical Engine, 2005.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Optical benches"

Ortolani, Claudio. "Optical Benches." In Flow Cytometry Today, 79–96. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-10836-5_6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Zheleznyak, Len, Scott MacRae, and Geunyoung Yoon. "Optical Bench Testing of IOLs." In Cataract Surgery: Maximizing Outcomes Through Research, 159–68. Tokyo: Springer Japan, 2014. http://dx.doi.org/10.1007/978-4-431-54538-5_13.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Felenbok, Paul, and Jean Guerin. "A Bench Fiber Fed Spectrograph for Stellar Line Variability Studies." In Instrumentation for Ground-Based Optical Astronomy, 260–65. New York, NY: Springer New York, 1988. http://dx.doi.org/10.1007/978-1-4612-3880-5_25.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kastner, Joel H., David A. Weintraub, I. Gatley, K. M. Merrill, and R. Probst. "First (Polarized) Light with the Noao Cryogenic Optical Bench." In Infrared Astronomy with Arrays, 99–100. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-1070-9_23.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Xia, Ying. "Electroacupuncture Against Ischemic Brain Injury: Efficacy, Optimal Condition, and Mechanisms." In Advanced Acupuncture Research: From Bench to Bedside, 681–735. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-96221-0_25.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Peter C., Yoji Kondo, and Ronald J. Oliversen. "Advanced Technology Lunar Astronomy Mission, the Moon as an Immense Optical Bench in Vacuum." In Highlights of Astronomy, 990–91. Dordrecht: Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-011-4778-1_117.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kim, Cheol, Sun Goo Kim, and Yong Yun Kim. "Development of Composite Optical Bench Structures on a Satellite Considering Launch and Space Environments." In Advances in Composite Materials and Structures, 457–60. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.457.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yang, Yuan Hua, Shi Jin Chen, Xi Zhi Sun, and Kai Cheng. "Structural Design of a Bench-Type Ultra-Precision Machine Tool for Micro-Structured Optical Components." In Optics Design and Precision Manufacturing Technologies, 408–12. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-458-8.408.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rees, Andreas, and Michael Oschwald. "Experimental Investigation of Transient Injection Phenomena in Rocket Combusters at Vacuum with Cryogenic Flash Boiling." In Fluid Mechanics and Its Applications, 211–31. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-09008-0_11.

Повний текст джерела

Анотація:

AbstractThe substitution of the toxic hydrazine in current high-altitude rocket engines like upper stages or reaction control thrusters by green propellants is a major key driver in the current technology development of rocket propulsion systems. Operating these kind of rocket engines at high-altitude leads to a sudden pressure drop in the liquid propellants during their injection into the combustion chamber with a near-vacuum atmosphere prior to ignition. The resulting superheated thermodynamic state of the liquid causes a fast and eruptive evaporation which is called flash boiling. The degree of atomisation is important for a successful ignition and a secure operation of the rocket engine. The development and operation of a cryogenic high-altitude test bench at DLR Lampoldshausen enables the systematical experimental characterization of cryogenic flash boiling due to its ability to adjust and control the injection parameters like temperature, pressure or geometry. Several test campaigns with liquid nitrogen (LN2) were performed using two optical diagnostic methods: First, flash boiling LN2 spray patterns were visualised by means of high-speed shadowgraphy and, secondly, we determined the droplet size and velocity distributions in strongly superheated LN2 sprays with the help of a laser-based Phase Doppler system (PDA). The experimental data generated within these measurement campaigns provide defined boundary conditions as well as a broad data base for the numerical modelling of cryogenic flash boiling like e.g. the publications [8, 9].

Стилі APA, Harvard, Vancouver, ISO та ін.

van Gurp, J. F. C., Marcel Tichem, and U. Staufer. "Design, Fabrication and Testing of Assembly Features for Enabling Sub-micron Accurate Passive Alignment of Photonic Chips on a Silicon Optical Bench." In Precision Assembly Technologies and Systems, 17–27. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-28163-1_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Optical benches"

Chen, Chin T., Po K. Shen, Chia C. Chang, Jen Y. Li, Hsu L. Hsiao, Yun C. Lee, and Mount L. Wu. "Polymer waveguides based on silicon optical benches." In SPIE OPTO, edited by Jean Emmanuel Broquin and Gualtiero Nunzi Conti. SPIE, 2012. http://dx.doi.org/10.1117/12.908580.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Hue, Jean, Jean Dijon, Guillaume Ravel, Philippe Lyan, Pierre Garrec, T. Lanternier, Michel Olivier, and Alexandre Lagrange. "Automatic YAG damage test benches: additional possibilities." In Laser-Induced Damage in Optical Materials: 1998, edited by Gregory J. Exarhos, Arthur H. Guenther, Mark R. Kozlowski, Keith L. Lewis, and M. J. Soileau. SPIE, 1999. http://dx.doi.org/10.1117/12.344399.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Sabry, Yasser M., Tarik Bourouina, and Diaa Khalil. "D3. Optical coupling of cylindrical micromirrors in micro-optical benches." In 2015 32nd National Radio Science Conference (NRSC). IEEE, 2015. http://dx.doi.org/10.1109/nrsc.2015.7117847.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Schüle, S., U. Hollenbach, J. Mohr, J. Li, P. Vorreau, A. Efremov, J. Leuthold, and S. Schonhardt. "Modular integration of microactuators and micro-optical benches." In Photonics Europe, edited by Hugo Thienpont, Peter Van Daele, Jürgen Mohr, and Mohammad R. Taghizadeh. SPIE, 2008. http://dx.doi.org/10.1117/12.781932.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rugi Grond, Elisabetta, Andreas Herren, Stève Mérillat, and Jean Jacques Fermé. "Innovative lightweight baseplate solution for stable optical benches in space programmes." In Optical Systems Design, edited by Laurent Mazuray, Rolf Wartmann, Andrew Wood, Jean-Luc Tissot, and Jeffrey M. Raynor. SPIE, 2008. http://dx.doi.org/10.1117/12.797591.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Loiseau, Marc, Laurent Lamaignere, Roger Courchinoux, Gerard Raze, Caroline Sudre, Michel Josse, Thierry Donval, and Herve Bercegol. "Automatic damage test benches: from samples to large-aperture optical components." In Optical Systems Design, edited by Roland Geyl, David Rimmer, and Lingli Wang. SPIE, 2004. http://dx.doi.org/10.1117/12.512939.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Liu, Jiyuan, and Ichirou Yamaguchi. "Laser diode optical feedback interferometer for surface measurement outside optical benches." In Optical Engineering for Sensing and Nanotechnology (ICOSN '99), edited by Ichirou Yamaguchi. SPIE, 1999. http://dx.doi.org/10.1117/12.347757.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rugi Grond, E., A. Herren, S. Mérillat, and J. J. Fermé. "Innovative lightweight substrate for stable optical benches and mirrors." In International Conference on Space Optics 2008, edited by Josiane Costeraste, Errico Armandillo, and Nikos Karafolas. SPIE, 2017. http://dx.doi.org/10.1117/12.2308250.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Chen, Yang, King-Fu Hii, and R. Ryan Vallance. "Metallic optical benches with stamped micro-mirrors for photonic assemblies and optical interconnects." In Optical Interconnects XX, edited by Henning Schröder and Ray T. Chen. SPIE, 2020. http://dx.doi.org/10.1117/12.2550029.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rabenorosoa, K., C. Cle´vy, S. Bargiel, J. P. Mascaro, P. Lutz, and C. Gorecki. "Modular and Reconfigurable 3D Micro-Optical Benches: Concept, Validation, and Characterization." In ASME 2011 International Manufacturing Science and Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/msec2011-50160.

Повний текст джерела

Анотація:

In this paper, we present an approach to design MOEMS based on Reconfigurable Free Space Micro-Optical Benches (RFS-MOB). The proposed concept enables to design modular and reconfigurable MOEMS by using a generic structure of silicon holders and non defined position in the substrate. Various micro-optical elements, e.g. microlenses or micromirrors, can be integrated within holders. Their assembly is achieved with an active microgripper, after high precision alignement within guiding rails of silicon substrate. Flexible parts are used to maintain a final position. The concept is validated by successful assembly of holders. A characterization method of assembled holders is proposed and provides an accuracy better than ± 0.04° for an angle measurement.

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Optical benches"

Chou, A. Optical Cavity Test Bench. Office of Scientific and Technical Information (OSTI), July 2010. http://dx.doi.org/10.2172/993869.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

VerMeulen, Holly, Jay Clausen, Ashley Mossell, Michael Morgan, Komi Messan, and Samuel Beal. Application of laser induced breakdown spectroscopy (LIBS) for environmental, chemical, and biological sensing. Engineer Research and Development Center (U.S.), June 2021. http://dx.doi.org/10.21079/11681/40986.

Повний текст джерела

Анотація:

The Army is interested in sensors capable of characterizing/monitoring the environment (battlefield or military training ranges) at proximal distances. Recently, we evaluated laser induced breakdown spectroscopy (LIBS) systems (hand-held, proximal, and bench top) for the characterization of metals (antimony, copper, lead, tungsten, and zinc) in soils obtained from military training ranges. We then compared the results to findings obtained with standard field and laboratory instrumentation for metals analysis -X-ray Fluorescence (XRF) and Inductively Couple Plasma- Optical Emission Spectroscopy (ICP-OES).

Стилі APA, Harvard, Vancouver, ISO та ін.

Corriveau, Elizabeth, Ashley Mossell, Holly VerMeulen, Samuel Beal, and Jay Clausen. The effectiveness of laser-induced breakdown spectroscopy (LIBS) as a quantitative tool for environmental characterization. Engineer Research and Development Center (U.S.), April 2021. http://dx.doi.org/10.21079/11681/40263.

Повний текст джерела

Анотація:

Laser-induced breakdown spectroscopy (LIBS) is a rapid, low-cost analytical method with potential applications for quantitative analysis of soils for heavy metal contaminants found in military ranges. The Department of Defense (DoD), Army, and Department of Homeland Security (DHS) have mission requirements to acquire the ability to detect and identify chemicals of concern in the field. The quantitative potential of a commercial off-the-shelf (COTS) hand-held LIBS device and a classic laboratory bench-top LIBS system was examined by measuring heavy metals (antimony, tungsten, iron, lead, and zinc) in soils from six military ranges. To ensure the accuracy of the quantified results, we also examined the soil samples using other hand-held and bench-top analytical methods, to include Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES) and X-Ray Fluorescence (XRF). The effects of soil heterogeneity on quantitative analysis were reviewed with hand-held and bench-top systems and compared multivariate and univariate calibration algorithms for heavy metal quantification. In addition, the influence of cold temperatures on signal intensity and resulting concentration were examined to further assess the viability of this technology in cold environments. Overall, the results indicate that additional work should be performed to enhance the ability of LIBS as a reliable quantitative analytical tool.

Стилі APA, Harvard, Vancouver, ISO та ін.

Hurley, J. P., and M. L. Swanson. Baseline and optional bench-scale testing of a chemical candle filter safeguard device. Office of Scientific and Technical Information (OSTI), November 2000. http://dx.doi.org/10.2172/774907.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Development, testing, and demonstration of an optimal fine coal cleaning circuit. Task 5: Evaluation of bench-scale test results and equipment selection for in-plant pilot tests. Office of Scientific and Technical Information (OSTI), December 1995. http://dx.doi.org/10.2172/251287.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!