Дисертації: "OpenWorm"

1

Проколий, Игорь, та Ольга Алексеевна Дольская. "Квантовая природа сознания". Thesis, НТУ "ХПИ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/15553.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Parracho, João Paulo Ligeiro Feteira. "Gateway LinuxMCE: openWrt para aplicações domóticas." Master's thesis, Universidade de Aveiro, 2010. http://hdl.handle.net/10773/4456.

Повний текст джерела

Анотація:

Mestrado em Engenharia Electrónica e Telecomunicações A domótica é um campo da automação em franca expansão e, hoje em dia, é recorrente vê-la incorporada em novas construçõoes habitacionais que pretendem níveis de conforto, segurança e tecnologia acima da média. No entanto, um dos problemas desta nova tendência tecnol ógica, tal como a maior parte delas, reside no seu custo muito elevado. Assim, com esta dissertação pretende implementar-se um sistema de baixo custo, devido ao uso de sensores e ao apoio numa distribuição open source dedicada a esta área, o LinuxMCE. Como primeira abordagem, foi estudada a plataforma em questão, métodos da sua instalação e compilação e integração de novos sensores. Depois desta fase inicial, criou-se em C/C++ uma ponte de comunicação entre eles e o sistema (a gateway ), baseada em sockets TCP/IP e, por fim, um demonstrador. Quanto a resultados obtidos, conseguiu-se instalar e configurar a distribuição referida, estabelecer a conexão entre os vários sensores e o LinuxMCE e assegurar o funcionamento do sistema a nível geral (nomeadamente a nível temporal). Existem, no entanto, algumas limitações, visto este sistema já implementar um esquema de troca de mensagens entre ele e os dispositivos externos, que não foi possivel adaptar aos sensores. Domotics is a field of automation in fast growing expansion, and nowadays it’s usual to notice it incorporated in new habitacional constructions that aim for unprecedented levels of comfort, security and technology. Despite that, one of the issues with this new technological trend, as with most of them, is related with its high cost. Therefore, the goal of this dissertation, is to implement a low cost system of this type, due to the usage of sensors and LinuxMCE, a support open source software dedicated to this area. As a first approach, one has studied the platform, his methods of installation and how to compile and integrate the new sensors. Afterwards, it was created a bridge in C/C++ based on TCP/IP sockets to accommodate the communication between them and the system and a showcase of the overall work. Regarding final results, one has accomplished to properly install and configure the distribution, establish the connection among the various sensors and LinuxMCE and having this last one working (regarding temporal restrains). There are however some limitations, because this system already implemented a scheme of messaging exchange from and to the external devices, that was not possible to adapt to the sensors.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Stračár, Ivan. "Implementace jednoduché pobočkové ústředny na OpenWRT." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220608.

Повний текст джерела

Анотація:

The diploma thesis deals with the system OpenWRT. Installing this system on the router Siemens Gigaset SX762. Describes how to compile and upload the simple package helloworld into this system. The package was tasked invitation simple phrase "Hello World" to the system console of OpenWRT. Package only serve to show that the system OpenWRT allows users to customize it according to their needs. After that it was installed PBX Asterisk into the system OpenWRT. Proper functioning of PBX Asterisk has been verified to make a call between two software phones ZoiPer. Furthermore, the work described telephony application programming interface (TAPI). Some of its fun- ctions, interfaces and packages needed to communicate with the system OpenWRT. In conclusion, the presented test topology and verify the operation of making calls between analog as well as softphones.

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Kurokawa, Kumiko. "Jade openwork egret finials their historical context and use in China and Korea /." Online version, 2004. http://bibpurl.oclc.org/web/23612.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Kurokawa, Kumiko. "Jade openwork egret finials : their historial context and use in China and Korea." Thesis, University of Glasgow, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.443381.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Hansen, Christel Dorothee. "The characterisation of an openwork block deposit, northern buttress, Vesleskarvet, Dronning Maud Land, Antarctica." Thesis, Rhodes University, 2014. http://hdl.handle.net/10962/d1013138.

Повний текст джерела

Анотація:

Investigating openwork block accumulation has the potential to further our understanding of rock weathering, the control of geological structure on landforms, the production of substrates for biological colonisation and the impacts of climate change on landform development and dynamics. Various models for the development of these landforms have been proposed. This includes in situ weathering, frost heave and wedging. Furthermore, it has been suggested that cold-based ice has the potential to preserve these features rather than to obliterate them. Blocky deposits are also frequently used as proxy evidence for interpreting palaeoclimates. The morphology and processes acting on a blockfield located on the Northern Buttress of the Vesleskarvet Nunataks, Dronning Maud Land, Antarctica (2°W, 71°S) were investigated and characterised. Given block dimensions and orientations that closely resembled the parent material and only small differences in aspect related characteristics observed, the blockfield was found to be autochthonous with in situ block production and of a young (Holocene) age. Small differences in rock hardness measurements suggest some form of aspect control on rock weathering. South-facing sides of clasts were found to be the least weathered. In comparison, consistently low rock hardness rebound values for the north-facing aspects suggest that these are the most weathered sides. Additional indicators of weathering, such as flaking and pitting, support analyses conducted for rock hardness rebound values. Solar radiation received, slope gradients and snow cover were found to influence weathering of clasts across the study site. Furthermore, ambient temperatures and wind speed significantly influenced near-surface ground temperatures dynamics. However, the lack of a matrix and paucity of fine material in textural analyses suggest a limited weathering environment. It is suggested that the retreat of the Antarctic ice sheet during the last LGM led to unloading of the surface, causing dilatation and subsequent fracturing of the bedrock along pre-existing joints, leading to in situ clast supply. Subsequent weathering and erosion along other points or lines of weakness then yielded fines and slight edge rounding of clasts.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Porter, Jeremy. "Detecting Malicious Behavior in OpenWrt with QEMU Tracing." Wright State University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=wright1564840733498961.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Jašíček, Petr. "Softwarový kontrolér Wi-Fi přístupových bodů se systémem OpenWrt." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-400887.

Повний текст джерела

Анотація:

The aim of this thesis was to create a web application used for centralized management and configuration of wireless networks on access points running on OpenWrt distribution. The reader is acquainted with common principles of wireless networks including description of existing solutions for their centralized management. After that the thesis introduces the reader to OpenWrt distribution and to a method of its configuration using UCI model. The reader is then introduced to the main technologies used in this thesis. Author further describes architecture, user interface and implementation of the web application. The created web application is platform agnostic and provides easy way to manage and configure access points with OpenWrt distribution.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Струмінська, Т. В., та Олена Підопригора. "Сучасні тенденції в декоративному оформленні вікон". Thesis, Київський національний університет технологій та дизайну, 2018. https://er.knutd.edu.ua/handle/123456789/10594.

Повний текст джерела

Анотація:

Для удосконалення конструктивних рішень елементів декорування вікна, проведено аналіз існуючих видів декоративного оформлення вікна та методи їх виготовлення. Одним із видів сучасного декорування вікна є використання ламбрекенів з ажурними основами. Визначено методи виготовлення такого типу ламбрекенів, які не повністю задовольняють вимогам споживача. Розроблено новий метод виготовлення та обробки ажурної частини ламбрекену, що дозволить виготовляти вироби різної форми і розміру, використовувати тканини різного типу і складу, а також покращити естетичний вигляд готового виробу. To improve the design decisions of window decoration elements, an analysis of existing types of decorative window design and methods of their manufacture was conducted. One of the types of modern window decoration is the use of lambrequins with openwork bases. The methods of making such type of lambrequins, which do not completely satisfy the requirements of the consumer, are determined. A new method of manufacturing and processing of the openwork piece of lambrequin has been developed, which will allow to make products of various shapes and sizes, to use fabrics of different type and composition, and also to improve the aesthetic appearance of the finished product.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Salles, Laís Monique Mendes. "Desenvolvimento de um dispositivo de medição de ruído com base no sistema OpenWrt." Ilha Solteira, 2017. http://hdl.handle.net/11449/154132.

Повний текст джерела

Анотація:

Orientador: João Antônio Perreira Resumo: O presente trabalho tem como proposta o desenvolvimento de um dispositivo de medição de ruído utilizando componentes e dispositivos eletroeletrônicos de baixo custo para uso no monitoramento de ruído em ambientes de trabalho. No desenvolvimento e implementação do sistema de medição foram estudas duas proposta de dispositivos, uma com base na plataforma Arduino e outra com base no sistema OpenWrt em conjunto com um roteador. Os circuitos de captação do ruído foram desenvolvidos com base em circuitos de captação de sinais já existentes, identificando o que melhor se adaptou a proposta. O sistema de medição contempla ainda a proposta de operação remota, por meio da telemetria, de forma que o operador possa controlar as medições sem estar no local. Para isso, foi utilizado um módulo Wireless no Arduino e o próprio roteador usado sistema OpenWrt. Os dispositivos de medição propostos podem ser usados tanto para o monitoramento do ruído, como para o registro dos níveis de ruído de forma continua ou em intervalos de tempo predefinidos, possibilitando assim, a obtenção do histórico do ambiente. Para avaliação de desempenho dos dispositivos foi utilizado um sistema de medição de ruído comercial e as especificações e requisitos de normas técnicas. Os resultados mostraram que o dispositivo implementado com base no sistema OpenWrt apresentou um melhor desempenho, principalmente, em relação sua taxa de amostragem que é maior, não necessitando ajustes e a busca de soluções para aumentar da ... (Resumo completo, clicar acesso eletrônico abaixo) Abstract: The present work proposes the development of a noise measurement device, using components and electronic devices of low cost for use in the monitoring of noise in work environments. In the implementation of the measuring system were studied two proposals of devices one based on the platform Arduino and another based on the OpenWrt system together with a router. The noise pickup circuits were developed based on existing signal pickup circuits, identifying what best suited the proposal. The measurement system also contemplates the proposal of remote operation, by telemetry, so that the operator can control the measurements without being in place. For this, a wireless module was used in the Arduino and the router itself in the OpenWrt system. The proposed devices can be used both for noise monitoring and recording of noise levels continuously or at predefined time intervals, thus enabling the achievement of environmental history. For performance evaluation of the devices a commercial noise measurement system was used and the specifications and requirements of technical standards. The results showed that the system implemented based on the OpenWrt system presented a better performance, mainly in relation to its sampling rate that is higher, requiring no adjustments and the search for solutions to increase the sampling rate verified in the Arduino. Mestre

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Irstad, Noel, and Stjerne Fredrik. "Governing of access point for stations in an 802.11 network with a repeater to achieve higher throughput : Designing and implementing an algorithm on Inteno's OpenWRT based access points." Thesis, KTH, Data- och elektroteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-188523.

Повний текст джерела

Анотація:

When using a wireless repeater in a network, an overlap zone between the repeater and the primary access point that holds the internet connection is created. The theoretical throughput for connections through the repeater is reduced by half since the repeater can’t send and receive data at the same time when using only one channel which was the case in this thesis. To solve the problem with the overlap zone, an algorithm that runs in the form of a bash script on two openWRT-based access points where one acts as a repeater and the other one is a gateway with an internet connection was developed. The script uses the signal strength value (RSSI) to decide whether a wireless device is located within the overlap zone by comparing the measured value against a set threshold where the gateway still delivers higher throughput than the repeater. Wireless devices in the overlap zone are blocked on the repeater and will then connect to the gateway instead. Wireless devices that are located outside the overlap zone will connect to the access point that yields the strongest signal strength. The throughput to the gateway was measured at several locations with different signal strengths to both the gateway and the repeater. Wireless devices within the overlap zone that were connected to the repeater before the script was run gained a higher throughput after the script was run and made it connect directly to the gateway instead. Vid användning av en trådlös repeater i ett nätverk skapas en överlappningszon mellan repeatern och den primära anslutningspunkten som har uppkopplingen mot internet. Den möjliga datagenomströmningshastigheten för uppkopplingar via repeatern halveras eftersom repeatern inte kan sända och ta emot samtidigt på samma kanal. För detta examensarbete fanns inte möjligheten att använda fler kanaler. För att lösa problemet med överlappningszonen utvecklades en algoritm som körs i form av ett bash-skript på två openWRT-baserade anslutningspunkter där den ena agerar som repeater och den andra är en gateway med internetuppkoppling. Skriptet använder värdet på signalstyrka (RSSI) för att avgöra om en trådlös enhet befinner sig i överlappningszonen genom att kontrollera uppmätt värde mot ett tröskelvärde där gatewayen fortfarande ger högre datagenomströmningshastighet än repeatern. Trådlösa enheter i överlappningszonen blockeras på repeatern och kopplar då upp till gatewayen istället. Utanför överlappningszonen kopplas enheter upp till den anslutningspunkt som har starkast signalstyrka. Datagenomströmningen till gatewayen mättes på flera platser med olika signalstyrkor till både gatewayen och repeatern. Trådlösa enheter i överlappningszonen som var uppkopplade till repeatern innan skriptet kördes fick en högre datagenomströmningshastighet efter att skriptet kört och styrt om anslutningen direkt till gatewayen istället.

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Jánoš, Radan. "Řízení provozu na bezdrátových sítích." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218876.

Повний текст джерела

Анотація:

The Master´s thesis „Traffic management in wireless networks“ discusses how to ensure Quality of Service in these networks. A term „traffic management“ is connected mainly with certain restrictions and prioritization of some services and traffics in network. The thesis contains an overview of the most used wireless technologies and describes the approach of these technologies to ensure QoS. Theoretical part of the thesis follows with the definition of general principles of traffic management in IP networks and provides an overview of network parameters used in evaluating the quality of different types of communications services. Practical part is focused on the most widely used wireless technology of standard 802.11 and also on implementation of remote administration system on a small SOHO routers. These systems allow the use of queueing disciplines to manage QoS. Designed and implemented HTB discipline is tested on a real traffic network model.

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Passinger, Jiří. "Bezpečnostní analýza bezdrátových Wi-Fi sítí." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219785.

Повний текст джерела

Анотація:

This project is concerned with the security of Wi-Fi network. It defines security and introduces the principles of some security systems which are consequently instructed for its breakthrough, out of which follows the nature of security failures. The main emphasis is put on the current security issue of Wi-Fi Protected Setup (WPS) technology. Consequently, it is concerned with the putting into service of this technology in GNU/Linux distribution OpenWrt on Wi-Fi router TP-LINK TL-WR1043ND. The project is concluded with the suggestions for the correction of the security failure.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Schauer, Marek. "Oblíbenost JavaScriptových API internetového prohlížeče." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2021. http://www.nusl.cz/ntk/nusl-445496.

Повний текст джерела

Анотація:

In this work we present the design and implementation of a platform for automated measurement of the use of JavaScript APIs in a web browser. This platform is based on OpenWPM, which is used to instrument the web browser. In our architecture, the browser is extended with a modified Web API Manager extension, which allows to capture calls to JavaScript methods and log information about these calls. The platform was used to perform measurements on a 10,000 websites. From the analysis of the data obtained by the measurement, we found that the most used APIs over measured websites are APIs specified in HTML and DOM standards, High Resolution Time API and Web Cryptography API. Within the APIs that were implemented in Mozilla Firefox after 2016, we identified the Intersection Observer API, Background Tasks API and Resize Observer API as the most frequently used.

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Lenk, Peter. "Návrh a implementace systému pro výměnu statistických informací o síťovém provozu mezi přístupové body WLAN sítě." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2012. http://www.nusl.cz/ntk/nusl-219472.

Повний текст джерела

Анотація:

This thesis explores the possibilities of implementation of methods for data acquisition in wireless access point MikroTik while using virtualized OpenWRT system. First part of the paper contains short introduction into device’s features and extention of the features by virtualizing the operation system. Design and implementation of the scripts for average load of interfaces data acquisition is in the second part of the paper. The next part deals with the transmission of the gathered data and implementation of the proposed programs in C language. The last part of the paper covers the implementation of a complete program to collect, send and receive data with the option of parameters configuration, and automatic acquisition of the configuration.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Křístel, Jan. "Přístupový systém využívající BodyCom technologii." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220582.

Повний текст джерела

Анотація:

This master's thesis is primarily focused on the design of an electronic access control system using the BodyCom technology. The first section describes the working principle of this technology and its influence on human body. The second section shows an application of this technology in construction options of the electronic access control system.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Горбась, І. В. "Інформаційна технологія централізованого управління доступом віддалених систем". Master's thesis, Сумський державний університет, 2021. https://essuir.sumdu.edu.ua/handle/123456789/86707.

Повний текст джерела

Анотація:

Отримано гнучку систему, що дає змогу: до управління усіма пристроями у віддаленій мережі, що отримують IP-адресу за DHCP; збирати та зберігати дані щодо пристроїв користувачів у одному місці, а також мати можливість швидко керувати їх доступами до локальної мережі й мережі інтернет через зручний UI; залишати коментар, щодо певного пристрою і точно знати його володаря; делегувати відповідальність за надання/заборону доступів до мережі особам без вищої технічної освіти.

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Špinler, Martin. "Implementace pokročilých bezpečnostních algoritmů do domácích routerů." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2011. http://www.nusl.cz/ntk/nusl-236927.

Повний текст джерела

Анотація:

This work deals with network devices designed for packet routing in small networks. It's focused on two particular devices with ARM processor. There is detailed description of an instalation of OpenWRT operating system to this devices. Next, there are results of tests of routing performance of these and some other selected devices and tests of performance of alogorithms used in network security. A module for OpenWRT operating system for pattern-matching in network traffic is also part of the work.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Starzyczny, Radek. "Multiplatformní brána pro hlasovou komunikaci v reálném čase." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-220415.

Повний текст джерела

Анотація:

This master's thesis is focused on VoIP communications. It describes deploy of the operating system OpenWRT, analog interface of router Gigaset SX762 and GSM gateway for receiving or place calls. The paper describes the protocols involved in the communication and basic configuration elements. Deploying IP telephony enables to reduce the cost of operation and provides a number of additional functions.

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Kubík, Pavel. "Měření intenzity provozu během pevně daných intervalů v AP." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218833.

Повний текст джерела

Анотація:

The thesis analyzes the network traffic on a router with open source firmware. First is chosen a software platform, based on compatibility with available equipment. Then are assessed properties necessary for the development of custom applications. Support for various programming languages provided by the SDK, development environment and the available modules and libraries, for working with network interface. Based on these factors is then chose method to realize the program. He is implemented on the OpenWRT firmware in C / C + + using network library pcap. These funds are used to capture and analyze network traffic. Obtained data are processed using methods of technical analysis, namely on the basis of moving averages, Stochastic oscillator and Bollinger bands. Based on results of these methods are generated and verified estimates of traffic. They are based on linear extrapolation, simplified for fixed intervals. The validity of each method is verified on base of the estimated value. Method is verified if estimated value of the traffic volume is in the Bollinger band, which is given by the standard deviation. Each method is tested several times in real traffic with different input parameters. Then is evaluated the influence of parameters on the error rate of methods. Individual methods are compared and evaluated based on the behavior in different scenarios and based on the average relative error.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Hornyak, Tomáš. "Optimalizace procesu handoveru v reálném síťovém prostředí." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-218882.

Повний текст джерела

Анотація:

This Master´s thesis deals especially with exploration of the handover process and with searching for ways of in?uencing this process. The goal of this thesis is to create tools for recording of access point utilization and in?uence the handover of wireless clients based on the obtained data. An access point with open ?rmware, which allows low-level management, was necessary for practical tests. First chapter deals with a survey of current o?er of open ?rmware available for access points and then the appropriate candidate for this thesis is chosen – the OpenWRT project. Second chapter deals with the con?guration of OpenWRT system and basic settings of the chosen wireless router – TP-Link TL-WR1043ND. Next chapter deals with analysis of the handover process in wireless networks. Information obtained by this analysis is used during the creation of the graphic application. The fourth chapter presents the basics of Microsoft Native Wi-Fi API and introduces basic functions used by this API. Those functions were used during the creations of the application. Last two chapters present the created graphic application. The ?fth chapter deals with the application design and examination of its functionality and used functions. Last chapter then documents usability of the application in real environment.

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Halaj, Jozef. "Detekce anomálií v IoT sítích." Master's thesis, Vysoké učení technické v Brně. Fakulta informačních technologií, 2020. http://www.nusl.cz/ntk/nusl-417286.

Повний текст джерела

Анотація:

The goal of the thesis was an analysis of IoT communication protocols, their vulnerabilities and the creation of a suitable anomaly detector. It must be possible to run the detector on routers with the OpenWRT system. To create the final solution, it was necessary to analyze the communication protocols BLE and Z-Wave with a focus on their security and vulnerabilities. Furthermore, it was necessary to analyze the possibilities of anomaly detection, design and implement the detection system. The result is a modular detection system based on the NEMEA framework. The detection system is able to detect re-pairing of BLE devices representing a potential pairing attack. The system allows interception of Z-Wave communication using SDR, detection of Z-Wave network scanning and several attacks on network routing. The system extends the existing detector over IoT statistical data with more detailed statistics with a broader view of the network. The original solution had only Z-Wave statistics with a limited view of the network obtained from the Z-Wave controller. The modular solution of the system provides deployment flexibility and easy system scalability. The functionality of the solution was verified by experiments and a set of automated tests. The system was also successfully tested on a router with OpenWRT and in the real world enviroment. The results of the thesis were used within the SIoT project.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Varga, Kamil. "Embedded systém pro sběr dat." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218309.

Повний текст джерела

Анотація:

This master's thesis is describing problems of embedded systems and their development. Furthermore, the operating system GNU/Linux and it's cross-compiling is described. Hardware problems are analyzed too. Concrete solution is system which is able to boot from the USB disc and it is based on OpenWrt distribution running on Edimax BR-6104KP router. The whole solution is described the way which can lead to any general embedded system.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Lee, Yun-Yu, and 李昀諭. "Implementation of OpenWrt-based IPPnP gateway." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/77215454474565038066.

Повний текст джерела

Анотація:

碩士 國立臺灣大學 電子工程學研究所 97 Wireless Networks have been widely used by people with mobile device or laptop nowadays. There are more and more coffee shops, universities, hotels, and other business that provide services of accessing the Internet via wireless LAN. In the small-scale hotspot, like coffee shops and store, using common access gateway to provide service will be a good choice because of low cost and ease to construct. In this thesis we will describe how to implement a wireless hotspot access control gateway under the OpenWrt platform. This gateway will have (1) RADIUS client to communicate with RADIUS server, (2) captive portal mechanism to strengthen access control, (3) dynamic DNS client to be easily connected and managed without the inconvenience of dynamic IP address. And it will also have SSH connectivity and web page GUI to be configured and managed via Internet. In addition, IP PnP (IP plug and play) will be in the gateway for convenience of use.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Tsai, Han-Min, and 蔡漢民. "The Form and Function of Openwork Windows in the Lin''''s Family House." Thesis, 1998. http://ndltd.ncl.edu.tw/handle/50702772092803812212.

Повний текст джерела

Анотація:

碩士 國立臺灣大學 園藝學系研究所 86 The main purpose of this research is to study the forms and functions of "Op enwork Windows" in the Lin''''s Family House. The method of site investigation w as used to collect data and information through photographing and measurement. Further research was then conducted by categorization, consolidation, and co mparison analysis. The thesis is divided into six chapters. Chapter One is " Introduction" which presents the motive, purpose, scope, content, methods, and process of this research. Chapter Two is "Chinese garden Openwork Windows" wh ich is a retrospect to the forms and functions of the Chinese garden Openwork Windows. Chapter Three is "The Background and Garden Layouts Design of Lin''''s Family House" which illustrates the development history and layout design of L in''''s Family House. Chapter Four is "The investigation of Lin''''s Fmily House''''s Openwork Windows" where further study and analysis were conducted. Chapter Fi ve is "Lin''''s Family House Openwork Windows''''s Comparison and Analysis" which co mpares the differences of Openwork Windows based on the information in the pre vious chapters. Chapter Six is "Conclusion" which summarizes the Lin''''s Family House Openwork Windows. Further application of "Openwork Windows" and the po ssible directions are also proposed for future study. The major research resu lts are summarized as follows: There are strong dependent relationships betwe en the forms and the functions of the Lin''''s Family House''''s Openwork Windows. The ''''Openwork Windows'''' forms include: height, open size, style, view, situatio n, materials, color, topic, meanings and symbol. The Openwork Windows''''s funct ions include: in-between space, visual guidance, artistry, opening degrees, em pty and solid forms, the buildings'''' styles and functions. Both forms and func tions have mutual influence on each other in terms of the depth. In addition both elements were also affected by the background and layout of the garden fr om the previous analysis.

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Yang, Ching-Tien, and 楊青天. "A Study on Implementation of OpenWrt-base VoIP." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/15943935930205251896.

Повний текст джерела

Анотація:

碩士 世新大學 資訊管理學研究所(含碩專班) 103 This study is based on open source firmware OpenWrt to develop a cost-effective VoIP solution to implement for small business or home-use environments. Most familiar VoIP functions had been tested and verified successfully at experimental environment of this study and stable 30 simultaneous SIP calls were verified on BUFFALO WZR-HP-G300NH wireless router sold around US$50 at retail market. Incoming and outgoing calls between OpenWrt-base Asterisk and voice gateway were also tested without any issue at experimental environment. This study involves more VoIP conceptions, framework of embedded system and network related technologies. OpenWrt system not only offers the VoIP functions but also offers various network features such as network firewall or wireless connection. Furthermore, we expect more and more people could use open source software or firmware to design various solutions.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Ou, Hsin Yi, and 歐欣怡. "Types and Functions of the Pi with Openwork Dragons in Eastern Chou,Qin and Han Dynasties." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/39544402720792256421.

Повний текст джерела

Анотація:

碩士 國立臺南藝術大學 藝術史學系藝術史與藝術評論碩士班 100 This study wants to analyse the Types and functional development of the Pi with openwork dragons in Eastern-Chou and Qin-Han Dynasties.The author tries to research the Pi with openwork dragon in Eastern-Chou and Qin- Han tombs, and to explore the Pi with openwork dragon the form system source.To clarify the evolution of such a form context and its may be hidden behind in cultural and social significance. Besides this text describes the objects with the Pi pattern including the outer edge of the Pi decorative shape of a dragon, phoenix forms ,will also be further included the Han reliefs and ornate Disk decorated with the Double dragons piercing through a jade images. The styles of the Pi already began from the Spring and Autumn Period, have a large number and variety of types in the Warring States Period .The regional distribution is over the Yangtze River and Yellow River Basin. The Pi with the openwork dragons has large number of changes in the proportion of the dragon carving and Pi in this period. In the Western Han Dynasty,the Pi with the openwork dragons is Pi ratio greater than the dragon carving,and carved dragon decoration gradually move above in Pi. At the Eastern Han Dynasty, the Pi with the openwork dragons carved auspicious words. The first chapter includes motivation,purpoes,research review and methods. The second chapter describes the types of the Pi with the openwork dragons and archeological discoveries.The third chapter explores association between the Pi with the openwork dragons and other material image of the Double dragons piercing through a jade The fourth chapter discusses the dissimilarities between historical texts and archeological discoveries.Final chapter comes to the conclusion and the limit in the research.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Cheng, Cheng-Hsiung, and 鄭正雄. "Development of an Automatic File Downloading Mechanism Based on the OpenWrt System." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/43909532093212995566.

Повний текст джерела

Анотація:

碩士 國立中興大學 電機工程學系所 100 The broadband network is faster in the modern Internet, and makes a lot of resources over the network to share. The application of broadband networks has almost become an important application in today''s Internet. This study investigated the use of a broadband network between two end points do file sharing, and using a mechanism or method to reach a file to do the automatic download function. This study is to use a host; the hardware is Network, of embedded systems as a hardware platform, to install the OpenWrt [1] operating system and embedded within the host system, and integrate of the OpenWrt [3] operating system and related software, to reach the management of the automatic download mechanism. We use the X86 Base platform as a host of embedded systems hardware, the hardware must have two network card interface, and one in eth0 (Ethernet Port0) must be connected to the broadband network modem in order to connect P2P file download to the internet. Another network card interface is eth1 (Ethernet Port 1), as Switch, connected to a user''s computer. Operating system and software, using OpenWrt as a resource management of embedded hardware and have built major software transmission, aMule, Squid Proxy, LuCI, of BusyBox. The automatic download mechanism is to use Squid, a proxy packet filter eth0 and eth1 of network interface to check the network packets; when the contents of the seed packet content to download BitTorrent files, or at http/ftp files, via the transmission software for to take over the download action, or through Linux the base command for automatic download. User through a browser to access the BitTorrent [9] and eDonkey [9] seed path and download content and via the Windows operating system on the network neighborhood to browse the downloaded file has been completed.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Huang, Kui-You, and 黃奎祐. "A Creative Study of the Application Combining Taiwanese Hakka Floral Fabric and Chinese Openwork Window on Clothing and Installation Art." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/22957879424457029393.

Повний текст джерела

Анотація:

碩士 樹德科技大學 應用設計研究所 103 Under the guidance of government, the cultural and creative industries witness its rapid development. The traditional Taiwanese Hakka cotton prints often show up in various products of cultural and creative industries, while the Chinese openwork window also has history of thousands of years. Being influenced by the migration culture of Ming and Qing Dynasties, the openwork windows in modern Taiwan are usually found to appear within the old buildings located near aged streets. They are presented in bricks, grilles, woodcarvings or cement grouting, combining the Taiwanese Hakka cotton prints with the openwork window totem design, which is a brand-new visual application. This study is a creative thesis, within which the “cultural product design procedure” is introduced in research methodology. The form appearance level concludes Hakka openwork window frame, the behavioral level concludes frame installation art and the mental emotional level concludes clothing design work. The signifier and signified of semiology are applied to analyze the semiotic meaning of openwork window, and the icon, index and sign are used to analyze the application of openwork window on element structure of costume design. The creative technique is to utilize laser cutting technology and trim a dress edging technique to show the application of openwork window and cotton prints on costume design visual modeling. The creative frame installation art is presented by mixed media. Results showed there are abundant elements in traditional culture that could be applied in costume design. This study has created 19 suits of costume work and 6 pieces of frame installation art. The application of laser cutting technology on garment industry has already become mature abroad, but that of Taiwan is still in its initial stage. This study could serve as the pioneer for the application of laser cutting textile on cultural and creative industries.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Huang, Ching-Chuan, and 黃慶泉. "Use OpenWrt Open Source on IXP435 Platform to Construct DLNA Cloud Media Server." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/tvdh28.

Повний текст джерела

Анотація:

碩士 國立中正大學 通訊資訊數位學習碩士在職專班 102 Smart mobile handheld devices are gradually replacing traditional phones and laptops, and smart TVs are gradually replacing the traditional television. These "smart" devices for the needs of the network is also growing because people wants to obtain the desired message or multimedia message from the internet, or messages exchange and sharing of multimedia to each other. The most convenient way to share multimedia from different places is via the cloud, such as the famous video sharing website, YouTube, offers many videos which someone shared on the Web out, is consistent with the needs of the current smart devices. In this thesis, hoping to store multimedia files in a private cloud, you can directly through the DLNA media server's network equipment broadcasting to family or friends to share. IXP435 platform used in this paper, is a full-rich functions hardware reference platform, have a wired and wireless network capabilities, but also the integration of multimedia processors and network phone features come in, connect another USB 2.0 portable hard drive, you can treat it as a NAS device. This thesis cannot get the board support package (BSP) , considered to use OpenWRT service support package (SDK) for development. After the driver modifications, network settings correction and software packages porting, success to construct a DLNA media server's network equipment and to verify by using currently available cloud space. To confirm that playback cloud movie through the DLNA directly is possible.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Edelsburg, Zahava. "The new within the given : collage principles and processes in contemporary painting." Diss., 2000. http://hdl.handle.net/10500/16733.

Повний текст джерела

Анотація:

Collage is presented as an allegoric art-form sui generis, considering allegory itself as an open-ended form of art. The research provides a suggestion to a different understanding of collage i.e.: as a catalyst for a search for structure and semiotic relationships in an attempt to overcome a constant disordered expansion of an intertextual web and hermeneutic possibilities; and as an open work, providing multi-layered meanings. As an open work collage is typified by the prominent role of its "readers", its ambiguity and the infinite net of references it summons. Collage may be conceived as a bridge between modernism and postmodernism, structuralism and post-structuralism; as a model for constant innovation and suppleness; as a stimulator for meta-artistic questions, acceptance of "soft" universals and reevaluation of the role of the Other within an artwork. Works by Jasper Johns, Michal Na'aman, Dina Hoffman and myself exemplify these ideas. Visual Arts M.A. (Visual Arts)

Стилі APA, Harvard, Vancouver, ISO та ін.

Дисертації з теми "OpenWorm"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями