Добірка наукової літератури з теми "Open Hole Tensile Testing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Open Hole Tensile Testing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Open Hole Tensile Testing"
Sanei, Seyed HR, Andrew Arndt, and Randall Doles. "Open hole tensile testing of 3D printed continuous carbon fiber reinforced composites." Journal of Composite Materials 54, no. 20 (January 23, 2020): 2687–95. http://dx.doi.org/10.1177/0021998320902510.
Повний текст джерелаBale, J. "Damage Behaviour and Stress Concentration Factor of Open Hole Tensile (OHT) Glass Fibre Reinforced Polymer (GFRP) Composites." International Journal of Automotive and Mechanical Engineering 16, no. 4 (December 30, 2019): 7299–314. http://dx.doi.org/10.15282/ijame.16.4.2019.09.0543.
Повний текст джерелаDave, Harshit K., Ashish R. Prajapati, Shilpesh R. Rajpurohit, Naushil H. Patadiya, and Harit K. Raval. "Open hole tensile testing of 3D printed parts using in-house fabricated PLA filament." Rapid Prototyping Journal 26, no. 1 (January 6, 2020): 21–31. http://dx.doi.org/10.1108/rpj-01-2019-0003.
Повний текст джерелаZhang, Xiao Qiong, Wei Guo Guo, and De Shuan Kong. "Damage Analysis of 2D Woven Composite Laminates Containing an Open-Hole under Tensile Loadings." Key Engineering Materials 525-526 (November 2012): 373–76. http://dx.doi.org/10.4028/www.scientific.net/kem.525-526.373.
Повний текст джерелаStrungar, Elena, Dmitrii Lobanov, and Valery Wildemann. "Evaluation of the Sensitivity of Various Reinforcement Patterns for Structural Carbon Fibers to Open Holes during Tensile Tests." Polymers 13, no. 24 (December 7, 2021): 4287. http://dx.doi.org/10.3390/polym13244287.
Повний текст джерелаHallett, Stephen R., Ben G. Green, Wen-Guang Jiang, Kin Hei Cheung, and Michael R. Wisnom. "The open hole tensile test: a challenge for virtual testing of composites." International Journal of Fracture 158, no. 2 (March 19, 2009): 169–81. http://dx.doi.org/10.1007/s10704-009-9333-8.
Повний текст джерелаBale, Jefri, Emmanuel Valot, Martine Monin, Olivier Polit, Claude Bathias, and Tresna Soemardi. "Tomography Observation of Fiber Reinforced Composites after Fatigue Testing." Applied Mechanics and Materials 799-800 (October 2015): 937–41. http://dx.doi.org/10.4028/www.scientific.net/amm.799-800.937.
Повний текст джерелаIragi, M., C. Pascual-González, A. Esnaola, U. Morales, J. Aurrekoetxea, C. S. Lopes, and L. Aretxabaleta. "Design, manufacturing and testing of 3D printed variable-stiffness laminates for improved open-hole tensile behaviour." Additive Manufacturing 63 (February 2023): 103418. http://dx.doi.org/10.1016/j.addma.2023.103418.
Повний текст джерелаBale, Jefri, Emmanuel Valot, Martine Monin, Peggy Laloue, Olivier Polit, Claude Bathias, and Tresna Priyana Soemardi. "Damage Observation of Glass Fiber/Epoxy Composites Using Thermography and Supported by Acoustic Emission." Applied Mechanics and Materials 627 (September 2014): 187–90. http://dx.doi.org/10.4028/www.scientific.net/amm.627.187.
Повний текст джерелаFarrow, I. R., J. Lee, and C. D. Kong. "Flexural Testing of Composite Laminates for Drilling Trial Assessment." Advanced Composites Letters 9, no. 4 (July 2000): 096369350000900. http://dx.doi.org/10.1177/096369350000900403.
Повний текст джерелаДисертації з теми "Open Hole Tensile Testing"
Arshad, Mubeen. "Damage tolerance of 3D woven composites with weft binders." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/damage-tolerance-of-3d-woven-composites-with-weft-binders(2b1435bc-fdb7-47c3-b555-ca5ea2883b4b).html.
Повний текст джерелаMollenhauer, David Hilton. "Interlaminar Deformation at a Hole in Laminated Composites: A Detailed Experimental Investigation Using Moire Interferometry." Diss., Virginia Tech, 1997. http://hdl.handle.net/10919/30680.
Повний текст джерелаPh. D.
Lai, Wen-You, and 賴玟佑. "The Study of Open Hole and Pin Hole Tensile Properties of Self-reinforced PET Composites." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/96et73.
Повний текст джерела國立臺灣科技大學
材料科學與工程系
104
The tensile and bearing strength of notched composites is an important factor for composite structural design. However, no literature is available on the notch sensitivity and pin loaded effects of self-reinforced polymer composites. In this study, self-reinforced recycled poly (ethylene terephthalate) (srrPET) composites were produced by film stacking from fabrics composed of double covered uncommingled yarns (DCUYs). Composites specimens were subjected to uniaxial tensile, flexural and Izod impact tests and the related results compared with earlier ones achieved on srPET composites reinforced with non-recycled technical PET fibers. Further on, the effects of open circular holes on the tensile strength of srrPETs with various width-to-hole diameter (W/D) ratios of the specimens, the effects of pin-loaded tensile behavior of srrPET composites with various W/D ratios and edge distance-to-hole diameter (E/D) ratios of the specimens, the endurance limit of tension–tension fatigue of pin loaded composites and damage development in srrPETs assessed by located acoustic emission were studied. Damage development in srrPET composites indicates that srrPET composites have higher resistance of the composite to crack propagation. These results proved that srrPET composites is tough, ductile notch-insensitive materials and have superior load carrying capability. The experimental results indicate that the bilinear (yielding followed by post-yield hardening) stress-strain curves were recorded in the open hole tensile (OHT) measurements. The srrPET composites had extremely high yield strength retention (up to 142%) and high breaking strength retention (up to 81%) due to the superior ductile nature of the srrPET composites, which induces plastic yielding near the hole thereby reducing the stress concentration effect. The superior load carrying capability is found in srrPET composites and highly dependent on the W/D ratios. The bearing failure mode occurs in W/D>4, the composites has high yield bearing strength (99.4 MPa) and extremely high ultimate bearing strength (199.3 MPa) due to strong interfacial bonding between the fiber and matrix contributes higher bearing strength. The strong interfacial bonding in srrPET composites has higher fatigue cycles and shows good endurance ability.
Santos, Rafael Alexandre Mota dos. "Effect of the Distance Between Impact Point and Hole Position and Non-Perpendicular Holes on the Impact Strength of Composite Laminates." Master's thesis, 2016. http://hdl.handle.net/10400.6/7703.
Повний текст джерелаO efeito da distância entre o ponto de impacto e posição de um furo e o ângulo do mesmo com o eixo vertical foi estudado. Para avaliar este efeito, foram também realizados ensaios de flexão. Em termos de distância do furo, uma redução máxima da resistência à flexão de 29,7% foi verificada para uma distância do furo de 0 mm. Esta redução foi de 22,3% no carregamento de impacto. Em termos de ângulo do furo, a redução máxima do carregamento foi de 15,6% para a flexão e em relação ao impacto este valor foi de 7%, para um ângulo de 20º. A resistência à fadiga foi também estudada. Foi verificada uma redução média de 68,5% na resistência à fadiga em compósitos de fibra de vidro para uma energia de impacto de 12 J, na presença de um furo.
Книги з теми "Open Hole Tensile Testing"
E, Masters John, and Langley Research Center, eds. Standard methods for open hole tension testing of textile composites. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.
Знайти повний текст джерелаL, Bradley Walter, Texas A & M University. Mechanics and Materials Center., and United States. National Aeronautics and Space Administration., eds. Micromechanics of compression failures in open hole composite laminates: A report. College Station, Tex: Mechanics and Materials Center, Texas A&M University, 1987.
Знайти повний текст джерелаMoss, A. C. Fracture characteristics of carbon and aramis unidirectional composites in interlaminar shear and open hole tensile tests. Amsterdam: National Aerospace Laboratory, 1986.
Знайти повний текст джерелаL, Norman Timothy, and Langley Research Center, eds. Effect of open hole on tensile failure properties of 2D triaxial braided textile composites and tape equivalents. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1995.
Знайти повний текст джерелаNational Aeronautics and Space Administration (NASA) Staff. Standard Methods for Open Hole Tension Testing of Textile Composites. Independently Published, 2018.
Знайти повний текст джерелаMicromechanics of compression failures in open hole composite laminates: A report. College Station, Tex: Mechanics and Materials Center, Texas A&M University, 1987.
Знайти повний текст джерелаKubecka, Chris. Down the Rabbit Hole An OSINT Journey: Open Source Intelligence Gathering for Penetration Testing. Chris Kubecka, 2017.
Знайти повний текст джерелаЧастини книг з теми "Open Hole Tensile Testing"
Sunny, K. K. Singh, and Ruchir Shrivastava. "Tensile Loading Rate Effect on Open-Hole Tensile Strength and Failure Mechanism of Polymer Composites." In Advances in Lightweight Materials and Structures, 281–91. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7827-4_28.
Повний текст джерелаHuang, Chunfang, Mingchang He, Yonglyu He, Jiayu Xiao, Jianwei Zhang, Su Ju, and Dazhi Jiang. "Investigation of Tensile Property of Thin Ply Composite Laminate with Open-Hole Assisted by Acoustic Emission Technology." In Advanced Functional Materials, 731–40. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0110-0_81.
Повний текст джерелаGururaja, Suhasini, Nithinkumar Manoharan, Jayaram Pothnis, and Anil Chandra. "Open Hole Fatigue Testing of CNT Infused GFRP Multi-scale Composite Laminates Using Infrared Thermography." In Fracture, Fatigue, Failure and Damage Evolution, Volume 3, 19–23. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-17467-4_3.
Повний текст джерела"Open-Hole Tensile and Compressive Strengths of Laminates." In Experimental Characterization of Advanced Composite Materials, Third Edition. CRC Press, 2002. http://dx.doi.org/10.1201/noe1587161001.ch13.
Повний текст джерелаZahid Qamar, Sayyad, Maaz Akhtar, and Tasneem Pervez. "Experimental Setup for Swellable Elastomers in Cased and Open Holes." In Swelling Elastomers in Petroleum Drilling and Development - Applications, Performance Analysis, and Material Modeling. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.94723.
Повний текст джерелаChen, Yajun, Fa Dong, Xinyu Geng, Xiaojie Bai, and Yanbin Wang. "Research on Blasting Technical Scheme of Hillside Open-Pit Mine with Heterogeneous and Complex Rock Mass." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220406.
Повний текст джерелаZahid Qamar, Sayyad, Maaz Akhtar, and Tasneem Pervez. "Numerical Investigation of Elastomer Seal Performance." In Swelling Elastomers in Petroleum Drilling and Development - Applications, Performance Analysis, and Material Modeling. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.94728.
Повний текст джерелаHumphreys, Hilary. "Case 28." In Oxford Case Histories in Infectious Diseases and Microbiology, edited by Hilary Humphreys, 186–92. Oxford University Press, 2020. http://dx.doi.org/10.1093/med/9780198846482.003.0028.
Повний текст джерелаТези доповідей конференцій з теми "Open Hole Tensile Testing"
MANOHARAN, NITHINKUMAR, and SUHASINI GURURAJA. "EFFECT OF CONTROLLED LOCAL MICROSTRUCTURAL MODIFICATION OF GLASS FIBER EPOXY COMPOSITES ON PROGRESSIVE DAMAGE PROPAGATION UNDER TENSILE LOADING." In Proceedings for the American Society for Composites-Thirty Seventh Technical Conference. Destech Publications, Inc., 2022. http://dx.doi.org/10.12783/asc37/36440.
Повний текст джерелаRamulu, M., and Harinder Oberoi. "Edge Finishing Effects on Mechanical Properties of Composite Laminates." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-72583.
Повний текст джерелаGahleitner, L., G. Thummerer, and G. Mayr. "3D photothermal imaging of subsurface damage evolution in fibrous composite materials due to fatigue loading." In QIRT. QIRT Council, 2022. http://dx.doi.org/10.21611/qirt.2022.3024.
Повний текст джерелаRoos, Arne, Marcus Winkler, Georg Wimmer, Jorge F. Dos Santos, and Stefanie Hanke. "New Approach on Solid State Joining of Stainless Steel Tube to Tube Sheet Joints." In ASME 2017 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/pvp2017-65376.
Повний текст джерелаPan, Jan Wei, Jinquan Cheng, Tomonari Furukawa, Athanasios P. Iliopoulos, and John G. Michopoulos. "Experimental System and Validation for Energy-Based Characterization." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-48902.
Повний текст джерелаFranco, Nata, Mauricio Corona, Mohamed AlMahroos, and Thiago Kestring. "Optimizing Wireline Formation and Evaluation Operations in Deep Horizontal Wells: Case Study." In ADIPEC. SPE, 2022. http://dx.doi.org/10.2118/211651-ms.
Повний текст джерелаKopriva, Radim, Petra Klatovska, Katerina Rusnakova, Petr Gal, Ivana Eliasova, and Dana Tonarova. "Optimization of Selected Parameters and Procedures in Small Punch Test Methodology." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21024.
Повний текст джерелаMichopoulos, John G., Athanasios Iliopoulos, John C. Hermanson, Adrian C. Orifici, and Rodney S. Thomson. "Preliminary Validation of Composite Material Constitutive Characterization." In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-71082.
Повний текст джерелаAbu Bakar, Nurul Nadia Ezzatty, M. Aizat Haidi Hod, M. Abiabhar Abitalhah, Ahmad Faiz Omar, and Hazlan Abdul Hakim. "Successful Delivery of Slim Well Design Concept for Future Marginal Fields." In Offshore Technology Conference Asia. OTC, 2022. http://dx.doi.org/10.4043/31357-ms.
Повний текст джерелаBarreto, Thays A., and Rafael C. Santiago. "EXPERIMENTAL STUDY OF THE TENSILE STRENGTH OF OPEN-HOLE FIBER-METAL LAMINATES." In Brazilian Conference on Composite Materials. Pontifícia Universidade Católica do Rio de Janeiro, 2018. http://dx.doi.org/10.21452/bccm4.2018.07.03.
Повний текст джерелаЗвіти організацій з теми "Open Hole Tensile Testing"
Lovell, Alexis, Garrett Hoch, Christopher Donnelly, Jordan Hodge, Robert Haehnel, and Emily Asenath-Smith. Shear and tensile delamination of ice from surfaces : The Ice Adhesion Peel Test (IAPT). Engineer Research and Development Center (U.S.), September 2021. http://dx.doi.org/10.21079/11681/41781.
Повний текст джерела