Добірка наукової літератури з теми "Non-Standard bending test"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Non-Standard bending test".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Non-Standard bending test":
Liu, Chao, Ning Ding, Jingsong Duan, Lili Zhou, Shanfu Cui, Shuna Jiang, and Aofei Li. "Precise mathematical model for the ratchet tooth root bending stress." Mechanical Sciences 12, no. 2 (December 20, 2021): 1105–13. http://dx.doi.org/10.5194/ms-12-1105-2021.
Kalia, Ajit, Juhi Joshi, Mohammed Mandsaurwala, Sayali Bobade, and Azmat Azha Khan. "Esthetic nickel titanium wires– Do they deliver the same force?" IP Indian Journal of Orthodontics and Dentofacial Research 8, no. 4 (December 15, 2022): 260–66. http://dx.doi.org/10.18231/j.ijodr.2022.045.
Chai, Teck Jung, Tan Cher Siang, Tang Hing Kwong, and Koh Heng Boon. "Bending Strength of Magnesium Oxide Board." Key Engineering Materials 879 (March 2021): 169–78. http://dx.doi.org/10.4028/www.scientific.net/kem.879.169.
Kunecký, Jiří, Václav Sebera, Jan Tippner, Hana Hasníková, Michal Kloiber, Anna Arciszewska-Kędzior, and Jaromír Milch. "Mechanical Performance and Contact Zone of Timber Joint With Oblique Faces." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 63, no. 4 (2015): 1153–59. http://dx.doi.org/10.11118/actaun201563041153.
Kosior-Kazberuk, Marta, and Rafał Wasilczyk. "Influence of static long-term loads and cyclic freezing/thawing on the behaviour of concrete beams reinforced with BFRP and HFRP bars." MATEC Web of Conferences 174 (2018): 04013. http://dx.doi.org/10.1051/matecconf/201817404013.
Susanto, Eko, Yulian Maheswara, and Akhmad Basuki Widodo. "Bending Strength of Apus Bamboo Fiber Reinforced Asphalt Composite Materials as Small Ship." BERKALA SAINSTEK 10, no. 4 (December 10, 2022): 195. http://dx.doi.org/10.19184/bst.v10i4.32604.
Vu, Ngoc-Hung, Xuan-Tan Pham, Vincent François, and Jean-Christophe Cuillière. "Inverse procedure for mechanical characterization of multi-layered non-rigid composite parts with applications to the assembly process." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233, no. 17 (July 7, 2019): 6167–76. http://dx.doi.org/10.1177/0954406219861126.
DeTora, M., and K. Kraus. "Mechanical testing of 3.5 mm locking and non-locking bone plates." Veterinary and Comparative Orthopaedics and Traumatology 21, no. 04 (2008): 318–22. http://dx.doi.org/10.3415/vcot-07-04-0034.
Concli, Franco. "Numerical Study of the Impact of Shot Peening on the Tooth Root Fatigue Performances of Gears Using Critical Plane Fatigue Criteria." Applied Sciences 12, no. 16 (August 18, 2022): 8245. http://dx.doi.org/10.3390/app12168245.
Fuentes-Talavera, F. J., J. A. Silva-Guzmán, R. Rodríguez-Anda, M. G. Lomelí-Ramírez, R. Sanjuán-Dueñas, and H. G. Richter. "Strength properties and natural durability of Avocado (Persea americana Mill.) branch wood." Madera y Bosques 17, no. 1 (August 30, 2016): 37–47. http://dx.doi.org/10.21829/myb.2011.1711153.
Дисертації з теми "Non-Standard bending test":
Salloum, Joulia. "Comportement mécanique de Matériaux Sandwichs Innovants pour application nautique." Electronic Thesis or Diss., IMT Mines Alès, 2023. http://www.theses.fr/2023EMAL0017.
This work consists of an experimental and numerical study of the mechanical behaviour of sandwich composite materials used in the nautical industry, up to damage occurrence and its evolution. For eco-design purposes, the facings are made of NCF triaxial basalt fibre laminates and a partially bio-sourced resin (greenpoxy), and the core consists of recycled PET foam. In addition to preparing these materials via vacuum infusion and conducting their microstructural and mechanical characterisation, the main goal of this study is to develop a robust model capable of predicting the response of these sandwich materials under static loading. It is worth noting that all conducted mechanical tests, including compression of the foam alone, simple traction of the monolithic in different directions, or bending of the sandwich composite, are instrumented by image correlation on multiple sides of the specimen to monitor the real-time damage evolution. Furthermore, a 3D finite element study of the mechanical response of the single components (foam and monolithic) and the sandwich is carried out based on Abaqus® simulations to assess the applicability of failure criteria and damage evolution methods. For instance, regarding the foam, the "crushable foam" model was used to predict its collapse within the sandwich structure. As for the monolithic, a progressive damage model of the fibre/matrix constituents is adopted within each ply, and cohesive elements between adjacent plies are used to account for delamination on a mesoscopic scale. This methodology aims to predict the initiation and accumulation of damage in the laminate. The proposed methodology is generic and provides an evolving basis for introducing the concept of cohesion between fibre and matrix, the effectiveness of which is intended for evaluation
Частини книг з теми "Non-Standard bending test":
Sharifi Ghaderi, Javad. "Determining the Characteristics of Acoustic Emission in the Fatigue Crack Growth of Aluminum Alloy 2025 for Online Structural Monitoring." In Advances in Fatigue and Fracture Testing and Modelling [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.99360.
Тези доповідей конференцій з теми "Non-Standard bending test":
Ferreira, Denis Alves, Vagner Pascualinotto Junior, and Diego F. B. Sarzosa. "Test Protocol Definition to Measure Fracture Toughness J-Parameter Using Non-Standard Four-Point Bending Specimens." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21592.
Van Wittenberghe, Jeroen, Patrick De Baets, and Wim De Waele. "Non-Linear Contact Analysis of an API Line Pipe Coupling." In ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77775.
Zhu, Xian-Kui. "Methods to Determine Low-Constraint Fracture Toughness: Review and Progress." In ASME 2016 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/pvp2016-63662.
Stephens, Michael John, Simon John Roberts, and Derek James Bennet. "A Validated Methodology to Establish Structural Capacities for Subsea Connector Families." In SPE Offshore Europe Conference & Exhibition. SPE, 2021. http://dx.doi.org/10.2118/205412-ms.
Adams, Douglas J., Svetlana Lublinsky, and Mauricio Barrero. "Test Methods for Accurate and Robust Material Property Measurements of Rodent Cortical Bone." In ASME 2008 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2008. http://dx.doi.org/10.1115/sbc2008-192893.
Yin, Shengjun, Paul T. Williams, Hilda B. Klasky, and B. Richard Bass. "Analysis of Ductile Crack Growth in Pipe Test in STYLE Project." In ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78518.
Lagat, Christopher, Reem Roufail, Vamegh Rasouli, Brian Evans, and Soren Soe. "Experimental Investigation of Steel Coiled Tubes Performance Under Cyclic Bending." In ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/omae2014-23208.
Saldanha, Faber A., V. Venkateswara Rao, J. Christopher, and Raviraja Adhikari. "Investigations on Concepts for Modularizing a Horizontal Axis Wind Turbine Blade." In ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/detc2013-12069.
Salazar, Julio Alberto Boix, Dirk F. de Lange, and Hugo I. Medellín Castillo. "Elastoplastic Analysis of the Erichsen Cupping Test Using Comsol Multiphysics FEM Code." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-39018.
Ladpli, Purim, Raphael Nardari, Raunaq Rewari, Hongjian Liu, Michael Slater, Keith Kepler, Yinan Wang, Fotis Kopsaftopoulos, and Fu-Kuo Chang. "Multifunctional Energy Storage Composites: Design, Fabrication, and Experimental Characterization." In ASME 2016 10th International Conference on Energy Sustainability collocated with the ASME 2016 Power Conference and the ASME 2016 14th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/es2016-59416.
Звіти організацій з теми "Non-Standard bending test":
Chauhan, Vinod. L52307 Remaining Strength of Corroded Pipe Under Secondary Biaxial Loading. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), August 2009. http://dx.doi.org/10.55274/r0010175.