Дисертації з теми "Nanostructured materials applications"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Nanostructured materials applications".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Kariuki, Nancy N. "Nanostructured materials for electroanalytical applications." Diss., Online access via UMI:, 2005.
Знайти повний текст джерелаLi, Yanguang. "Nanostructured Materials for Energy Applications." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1275610758.
Повний текст джерелаBuchholt, Kristina. "Nanostructured materials for gas sensing applications." Doctoral thesis, Linköpings universitet, Tillämpad Fysik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-69641.
Повний текст джерелаLatini, Alessandro. "Inorganic Nanostructured Materials for Technological Applications." Doctoral thesis, La Sapienza, 2006. http://hdl.handle.net/11573/917353.
Повний текст джерелаLi, Shanghua. "Fabrication of Nanostructured Materials for Energy Applications." Doctoral thesis, Kista : Division of Functional Materials, Department of Microelectronics and Applied Physics, School of Information and Communication Technology, Royal Institute o Technology, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-4807.
Повний текст джерелаFornara, Andrea. "Magnetic nanostructured materials for advanced bio-applications." Licentiate thesis, Stockholm : Informations- och kommunicationsteknik, Kungliga Tekniska högskolan, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-9569.
Повний текст джерелаBassett, David. "Synthesis and applications of bioinspired inorganic nanostructured materials." Thesis, McGill University, 2011. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=97064.
Повний текст джерелаMalgré le fait que l'étude des biomatériaux remonte à plusieurs siècles, ce n'est que récemment que des principes biologiques furent appliqués à des systèmes synthétiques dans des procédés de "biomimetic" et "bioinspirés", permettant ainsi de nouveaux matériaux de synthèses tout en réduisant l'expansion d'énergie et/ou d'éliminer les résultantes toxiques. Plusieurs chercheurs se sont inspirés des formes inusuelles dès plus intéressantes créées par des organismes, formés par un procédé de biominéralisation, qui modifie la nanostructure des matériaux synthétiques. Toutefois, les champs d'études des synthèses de nanoparticules et de la biominéralisation demeurent grandement à part, et cette thèse tente d'appliquer de nouvelles études de biominéralisation par rapport à la science des nanomatériaux.Les protéines sériques qui influencent la biominéralisation sont chargées négativement de résidus d'aspartate. Cette recherche déterminera l'habileté de ces protéines et des diverses molécules bio–organiques qui stabilisent biologiquement d'important minéraux aux multiples formes qui influencent la formation de matériaux non biogènes sur une nano échelle; l'or et le dioxyde de titane ont permis de démontrer ce résultat. L'or fut transformé en nanoparticules de cristal par l'action des protéines sériques, et c'est l'utilité de ces nanoparticules en tant que biocapteurs qui fut explorée. L'influence des molécules bios-organiques sur le choix de la phase ainsi que sur la restriction de la grosseur du cristal de dioxyde de titane, un important semi-conducteur dans plusieurs applications, fut explorée. Les nanoparticules dérivant bio-organiquement du dioxyde de titane ont dès lors démontrées leur action hautement efficace comme photo catalyseur. Le carbonate de calcium, un biominéral commun, a su démontré sa capacité à auto-former des structures à multiples échelles ainsi que différents polymorphes cristallins sous l'influence d'une protéine modèle. De plus, la manipulation des structures à former divers arrangements est une variable qui fut démontrée. Finalement, la stabilité des nanoparticules du phosphate de calcium à se disperser dans le sérum de culture fut modifiée afin d'optimiser l'efficacité du transfert dans deux lignes de cellules.Plusieurs grandes recherches ont accomplis de façon significative; (i) l'évaluation de l'habileté relative du sérum, le dérivé des protéines sériques et de leur capacité à stabiliser les phases de leurs multiples formes, (ii) la formation simple cristalline de l'or former par un anticorps, (iii) la formation de nanoparticules très actives photocatalytiquement d'anatase formées par un ester cyclique phosphorylée, (iv) la formation de structures coniques à l'interface air liquide par la capacité de gabarits d'une protéine, (iv) l'optimisation de transfection médiation par des nanoparticules de phosphate de calcium dans deux lignées cellulaires par filtration méchanique.
Renard, Laëtitia. "Nanostructured tin-based materials : sensing and optical applications." Thesis, Bordeaux 1, 2010. http://www.theses.fr/2010BOR14183/document.
Повний текст джерелаClass II hybrid materials were prepared from ditin hexaalkynides. Two families of precursors, including either hydrocarbon or oligothiophene-based spacers, were obtained and led by the sol-gel process to self-assembled organotin-based hybrid materials made of planes of oxide separated by organic bridges. Thus, the rigid thienyl spacer gave rise to a “pseudo-lamellar” structure that showed a monomer emission band with a rather small red-shift compared with to the emission of the precursor in solution. However more disordered thienyl xerogels led to broad emission features assigned to excimer or dimer formation. Moreover, thin films containing alkylene- and arylalkylene bridged have been prepared and showed a “pseudoparticulate” porous morphology and a short-range hierarchical order in the organic-inorganic SnOx pseudoparticles. Unexpectedly these hybrid thin films detect hydrogen gas at a temperature as low as 50 °C at the 200-10000 ppm level. From these hybrid thin films, crystalline tin dioxide (SnO2) were prepared by a thermal post-treatment. As expected, cassiterite SnO2 films detected H2 and to a less extent CO with a best operating temperature comprised between 300 and 350 °C
E, Peisan. "Nanostructured electroactive materials : applications in electroanalysis and electrocatalysis." Thesis, University of Warwick, 2016. http://wrap.warwick.ac.uk/89561/.
Повний текст джерелаRISPLENDI, FRANCESCA. "Nanostructured Materials for Photovoltaic Applications: a Theoretical Study." Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2533099.
Повний текст джерелаSTEVANIN, Claudia. "CHARACTERIZATION OF NANOSTRUCTURED ADSORBENT MATERIALS FOR ENVIRONMENTAL APPLICATIONS." Doctoral thesis, Università degli studi di Ferrara, 2022. http://hdl.handle.net/11392/2488253.
Повний текст джерелаL'inquinamento ambientale è cresciuto fino a diventare un problema che colpisce l'aria, l'acqua, il suolo e gli ecosistemi, principalmente a causa della crescita della popolazione mondiale in combinazione con un rapido sviluppo economico, che ha portato a un massiccio aumento della produzione globale. In effetti, è legato all'aumento dell'utilizzo e della complessità delle sostanze chimiche in molte attività umane. In particolare, l'ambiente acquatico globale è stato influenzato da sostanze chimiche antropogeniche ampiamente diffuse e, tra queste, i contaminanti di interesse emergente (CEC), compresi i prodotti farmaceutici e i prodotti per la cura personale, sono di particolare rilevanza poiché possono avere un impatto sulla vita acquatica e salute umana. CEC è un termine usato per descrivere sostanze chimiche sintetiche o presenti in natura o qualsiasi microorganismo che non è comunemente monitorato nell'ambiente ma ha il potenziale di entrare nell'ambiente e causare effetti negativi noti o sospetti. I principali gruppi di CEC sono prodotti farmaceutici, prodotti per la cura personale, interferenti endocrini, tensioattivi, contaminanti organici persistenti, additivi industriali e dolcificanti artificiali. Questi contaminanti sono difficili da rintracciare a causa della necessità di metodi di rilevamento specifici, sollevando la domanda su quanto tempo questi contaminanti siano prevalenti ell'ecosistema e come il processo di contaminazione possa essere invertito o ridotto. Inoltre, è improbabile che diversi CEC vengano rimossi dai processi convenzionali di trattamento delle acque reflue (WWT). Le tecnologie avanzate di trattamento delle acque reflue sono state identificate per essere efficaci nel trattamento delle acque contaminate, come la nanofiltrazione, l'osmosi inversa,l'ozonizzazione e l'ossidazione chimica. Tra le diverse soluzioni, l'adsorbimento, una tecnologia consolidata, è ancora considerata un metodo affidabile e robusto per purificare soluzioni acquose a basso costo e con alta efficienza. Uno dei principali vantaggi delle tecnologie basate sull'adsorbimento è che sono in grado di rimuovere i contaminanti in intervalli di concentrazione molto bassi, una condizione operativa in cui la maggior parte delle altre tecniche di separazione sono scarsamente efficienti a causa dei piccoli gradienti di concentrazione coinvolti. Inoltre, l'adsorbimento è un metodo versatile che può rimuovere contemporaneamente molti diversi composti organici e inorganici, a condizione che venga impiegata una miscela adatta di materiali adsorbenti.Questa tesi si è concentrata sulla valutazione di diverse strategie per rimuovere gli inquinanti dalla matrice acquosa. In particolare, abbiamo studiato metodi basati sull'adsorbimento, e in questo caso sono stati selezionati materiali adsorbenti diversi tra loro per struttura, composizione chimica e condizioni operative, che possono essere suddivisi in due classi: (i) adsorbente microporoso silico alluminato (zeoliti) e (ii) membrane a matrice mista a base di carbonio (MMM). In questa tesi sono state studiate le proprietà adsorbenti delle zeoliti verso diverse classi di CEC (farmaci, PFAS e contaminanti organici) in soluzioni acquose al fine di studiare l'efficienza di questi materiali silicei in due applicazioni, ovvero: (1) la rimozione di contaminanti da matrice acquosa, (2) la fase di pre-concentrazione per l'analisi dei microinquinanti. Inoltre, sono state studiate anche le proprietà di adsorbimento MMM verso i composti perfluorurati. Le MMM sono composti da una fase polimerica continua e da una carica inorganica dispersa. Questa tesi include uno studio sui processi di ossidazione avanzati per la degradazione di prodotti farmaceutici in ambiente acquoso. In particolare sono stati studiati due diversi fotocatalizzatori: (i) decatungstato di sodio e (ii) triossido di tungsteno, questi semiconduttori hanno la capacità comune di fotoprodurre radicali .OH in soluzioni acquose.
MONAI, MATTEO. "NANOSTRUCTURED MATERIALS FOR ENVIRONMENTAL AND ENERGY-RELATED APPLICATIONS." Doctoral thesis, Università degli Studi di Trieste, 2017. http://hdl.handle.net/11368/2908133.
Повний текст джерелаMavundla, Sipho Enos. "One-Dimensional nanostructured polymeric materials for solar cell applications." Thesis, University of the Western Cape, 2010. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_1088_1305888911.
Повний текст джерелаThis work entails the preparation of various polyanilines with different morphologies and their application in photovoltaic solar cells. Zinc oxide (ZnO) with one-dimensional and flower-like morphology was also prepared by microwave irradiation and used as electron acceptors in photovoltaics devices. The morphological, structural, spectroscopic and electrochemical characteristics of these materials were determined by scanning electron microscopy (SEM), X-Ray diffraction (XRD), Raman, Fourier-transformed infrared spectroscopy (FTIR), ultraviolet and visible spectroscopy (UV-Vis), photoluminescence(PL), thermal gravimetric analysis (TGA) and cyclic voltammetry (CV) experiments. Devices fabricated from these materials were characterized under simulated AM 1.5 at 800 mW.
Skvortsova, Yulia Alexandrovna Geng M. Lei. "Simulation of tissues for biomedical applications." [Iowa City, Iowa] : University of Iowa, 2009. http://ir.uiowa.edu/etd/436.
Повний текст джерелаTang, Shijun Hu Zhibing. "Characterization, properties and applications of novel nanostructured hydrogels." [Denton, Tex.] : University of North Texas, 2006. http://digital.library.unt.edu/permalink/meta-dc-5605.
Повний текст джерелаYe, Fei. "Synthesis of nanostructured and hierarchical materials for bio-applications." Licentiate thesis, KTH, Funktionella material, FNM, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-35518.
Повний текст джерелаQC 20110701
Carrara, Serena. "Towards new efficient nanostructured hybrid materials for ECL applications." Thesis, Strasbourg, 2017. http://www.theses.fr/2017STRAF016/document.
Повний текст джерелаThis doctoral dissertation aim to develop new hybrid materials for ECL applications. In the field of metal complexes, the electrochemiluminescent properties of new Pt(II) and Ir(III) complexes were investigated as alternative of existing complexes. Passing to nanomaterials, the combination of labels and NCNDs bearing primary or tertiary groups on the surface as alternative co-reactant species resulted an interesting strategy to eliminate the toxic TPrA. In particular, NCNDs in covalently linked system with metal complexes is not only an innocent carrier for ECL active species, but act also as co-reactant in the ECL process, revealing itself an ECL self-enhancing platform. Finally, a real immunoassay for cardiac marker detection has been built with enhanced sensitivity and stability, which is of fundamental importance for biological and bio-medical detection applications. The same technology can be applied to a variety of other analytes opening the venue to other assays
Quintero-Jaime, Andrés Felipe. "Electrochemical Functionalization of Nanostructured Carbon Materials for Bioelectrochemical Applications." Doctoral thesis, Universidad de Alicante, 2020. http://hdl.handle.net/10045/116499.
Повний текст джерелаZhang, Yi. "Physical properties investigation of nanostructured materials and their applications /." Diss., Digital Dissertations Database. Restricted to UC campuses, 2007. http://uclibs.org/PID/11984.
Повний текст джерелаCho, Joungmo. "Computational studies of reacting flows with applications in nanoscale materials synthesis." Amherst, Mass. : University of Massachusetts Amherst, 2009. http://scholarworks.umass.edu/dissertations/AAI3372259/.
Повний текст джерелаWang, Ling. "Syntheses and applications of bisphosphonate-based biomaterials and nanomaterials /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?CHEM%202007%20WANG.
Повний текст джерелаNyoni, Stephen. "Nanocomposites of carbon nanomaterials and metallophthalocyanines : applications towards electrocatalysis." Thesis, Rhodes University, 2016. http://hdl.handle.net/10962/d1020846.
Повний текст джерелаFang, Liming. "Processing of UHMWPE and HA/UHMWPE nanocomposite for biomedical applications /." View abstract or full-text, 2006. http://library.ust.hk/cgi/db/thesis.pl?MECH%202006%20FANG.
Повний текст джерелаCao, Shuai. "Nanostructured metal-organic frameworks and their amorphization, carbonization and applications." Thesis, University of Cambridge, 2014. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.707948.
Повний текст джерелаYar, Mazher Ahmed. "Development of Nanostructured Tungsten Based Composites for Energy Applications." Doctoral thesis, KTH, Funktionella material, FNM, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-101319.
Повний текст джерелаQC 20120827
Abdelaaziz, Muftah Ali. "Synthesis of nanocomposites with nano-TiO2 particles and their applications as dental materials." Thesis, Cape Peninsula University of Technology, 2012. http://hdl.handle.net/20.500.11838/1534.
Повний текст джерелаA study of the modification of dental nanocomposites with nanosized fillers is presented. The incorporation of TiO2 (titania) nanoparticles, via a silane chemical bond, to a standard dental acrylic resin matrix was explored to determine whether there was an increase in the wear resistance, flexural strength and surface hardness properties of the dental nanocomposites. The principal aim of this study was to synthesize dental nanocomposites with different sizes, treated, nano-TiO2 fillers in urethane dimethacrylate (UDMA) for potential application in posterior restoration and to evaluate their mechanical properties. Treatment of the nano-TiO2 particles was carried out with a silane coupling agent, 3-(methacryloyloxy)propyltrimethoxysilane (MPTMS), to improve bonding between the nano-TiO2 particles and acrylic matrix (UDMA), and reduce agglomeration of the nano-TiO2. Characterisation of products was carried out using scanning electron microscopy (SEM), transmission electron microscopy (TEM) and fourier transform infrared spectroscopy (FTIR). TEM results were used to compare the particle size distributions of untreated TiO2 and treated TiO2 under various experimental conditions in an ethanol solvent, while SEM images showed the adhesion between the matrix (UDMA) and the nano-TiO2. FTIR was used to show the qualitative composition of untreated TiO2 and treated TiO2. Eighteen groups of experimental dental nanocomposites were evaluated. Each group contained different average particle sizes of nano-TiO2 (filler): 5 nm, 21 nm and 80 nm. Each particle size category was treated with three different concentrations of the silane, (MPTMS): 2.5, 10 and 30 wt %. Samples were prepared by mixing the monomer resin matrix of UDMA and nano-TiO2 particles. For comparison, a commercially available dental resin was reinforced with untreated and treated nano-TiO2 particle sizes 5, 21 and 80 nm. Wear resistance, flexural strength and surface hardness of TiO2 nanocomposites treated with 2.5 wt % MPTMS were significantly higher compared to those treated with 10 and 30 wt% MPTMS. The nanocomposites with 5 nm TiO2 had higher wear loss, lower flexural strength and lower surface hardness values compared to those with 21 nm and 80 nm TiO2. Statistical analysis showed that the effect of the concentrations of MPTMS on wear resistance and surface hardness of specimens was significant (p<0.001), which is less than 0.05, while the effect of the concentration of MPTMS on flexural strength was statistically not significant, (p=0.02). Control composites reinforced with treated 80 nm TiO2 particles had much better mechanical properties than any of the other specimens. It was concluded that the most available commercial product for dental restorations could be improved by the addition of nano-TiO2 with relatively large particle size.
Tang, Shijun. "Characterization, Properties and Applications of Novel Nanostructured Hydrogels." Thesis, University of North Texas, 2006. https://digital.library.unt.edu/ark:/67531/metadc5605/.
Повний текст джерелаChen, Fanglin. "Synthesis and characterization of nanostructured materials for electrochemical and catalytic applications." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/20004.
Повний текст джерелаGarcía, Torres José Manuel. "Electrochemical Preparation of Co-Ag Nanostructured Materials for GMR Applications." Doctoral thesis, Universitat de Barcelona, 2010. http://hdl.handle.net/10803/2763.
Повний текст джерелаThe first step was the preparation of granular films. However, the big difference in the standard potentials of both metals discards their codeposition and therefore, the main problem to overcome was to reduce this difference. Different electrolytic baths containing different complexing agents (Bath 1: Thiourea, bath 2: Thiosulphate and bath 3: Chloride) were employed in order to favour the codeposition. After optimizing the composition of each solution, Co-Ag films with a distribution of nanometric cobalt particles into the silver matrix were obtained. However, the deposits prepared from baths 1 and 2 only showed giant magnetoresistnace (GMR) at low temperatures, fact that was attributed to the presence of sulphur in the magnetic/non-magnetic interfaces which hindered the magnetoresistance effect to take place. The use of a sulphur-free bath (bath 3) allowed obtaining films with GMR values up to 7% at room temperature, values higher than those published by others. The numerical analysis of the magnetoresistance curves, which allowed the decomposition of the magnetoresistance curves into its ferromagnetic (FM) and superparamagnetic (SPM) contribution, indicated the higher SPM contribution over the FM one in all the electrodeposition conditions.
On the other hand and taking profit of the versatility of the electrodeposition, Co-Ag multilayers were prepared. The magnetic (Co) and non-magnetic (Ag) layer deposition condition optimization was crucial to obtain the highest GMR values.
The electrochemical technology was also useful to prepara Co-Ag nanowires (both granular and multilayered nanowires) into the pores of polycarbonate membranes. Moreover, nanoparticles of the Co-Ag system were also prepared with a core-shell structure and by the microemulsion method. A voltammetric method was developed to univocally determine the correct core-shell structure formation. An strategy was also developed to measure the magnetoresistance of the last two kinds of nanomaterials (nanowires and nanoparticles) which corroborated their magnetoresistive behaviour.
L'electrodeposició és una tècnica que, dia rere dia, escala posicions entre les més habitualment emprades tècniques físiques de deposició. Aquest fet es deu principalment als avantatges que presenta la tècnica electroquímica front als mètodes físics, essent aquests: versatilitat, selectivitat, equipament senzill, temperatura ambient, elevades velocitats de deposició, gruixos importants,..Aquest projecte de tesi desenvolupa la preparació electroquímica de materials nanoestructurats cobalt-plata, material que potencialment és útil en aplicacions magnetorresistives.
El nostre objectiu inicial va ser la preparació de pel·lícules granulars. El primer problema que va haver de superar-se per aconseguir la codeposició d'ambdós metalls va ser reduir l'elevada diferència entre els seus potencials de deposició. Es van utilitzar diferents banys electrolítics contenint agents complexants (bany 1:Tiourea, bany 2: Tiosulfat i bany 3: Clorurs) per tal d'afavorir la codeposició, Les formulacions optimitzades d'aquests banys van permetre aconseguir dipòsits amb una dispersió de partícules nanomètriques de cobalt a la matriu de plata. No obstant això els dipòsits preparats a partir dels banys 1 i 2 únicament presentaren magnetorresistència gegant a temperatures criogèniques, fet que es va relacionar amb la presència de sofre a les interfases magnètiques/no magnètiques, proposta que es va confirmar posteriorment.
Afortunadament el bany base-clorurs (bany 3) va permetre obtenir dipòsits amb valors de GMR de fins a un 7% a temperatura ambient, valors sensiblement superiors als trobats a la literatura. Un tractament de les dades experimentals amb un model teòric va permetre establir la contribució a la magnetoresistència de les partícules de cobalt d'acord amb la seva mida.
D'altre banda aprofitant la versatilitat de l'electrodeposició, es va procedir a la preparació de multicapes Co-Ag. L'optimització de les condicions d'electrodeposició tant de la capa magnètica (Co) com de la capa no magnètica (Ag) va ser decisiva per tal d'obtenir estructures amb GMR.
El mètode electroquímic va ser útil per obtenir fils de mida nanomètrica de Co-Ag a partir de templates de membranes de policarbonat, tant granulars com en forma de multicapa. D'aquest material, Co-Ag, s'han preparat nanoparticules amb estructura nucli-corona pel mètode de la microemulsió, per les que s'ha desenvolupat un mètode electroquímic de caracterització que ha permès comprovar la correcta formació de les nanoparticles. Per la mesura de GMR d'aquests sistemes nanomètrics (nanofils i nanoparticles) s'ha dissenyat un procediment experimental de mesura que ha confirmat el caràcter magnetoresistiu de les nanoestructures.
Patel, Alpa C. Wei Yen. "Bioapplicable, nanostructured and nanocomposite materials for catalytic and biosensor applications /." Philadelphia, Pa. : Drexel University, 2006. http://hdl.handle.net/1860/1124.
Повний текст джерелаLowe, John Beresford. "Novel preparative routes to nanostructured materials for fuel cell applications." Thesis, University of St Andrews, 2014. http://hdl.handle.net/10023/11949.
Повний текст джерелаShen-Ming, Chen. "Applications of nanostructured materials and biomolecules for electrocatalysis and biosensors." Thesis, Видавництво СумДУ, 2011. http://essuir.sumdu.edu.ua/handle/123456789/20454.
Повний текст джерелаGallagher, Jamie Brian. "Synthesis of nanostructured materials with potential renewable energy generation applications." Thesis, University of Glasgow, 2015. http://theses.gla.ac.uk/7040/.
Повний текст джерелаSchiavo, Loredana. "Synthesis and Characterization of Nanostructured Materials for Hydrogen Storage Applications." Doctoral thesis, Università degli studi di Trento, 2017. https://hdl.handle.net/11572/368885.
Повний текст джерелаSchiavo, Loredana. "Synthesis and Characterization of Nanostructured Materials for Hydrogen Storage Applications." Doctoral thesis, University of Trento, 2017. http://eprints-phd.biblio.unitn.it/2682/1/Deposit_Disclaimer_Loredana_Schiavo.pdf.
Повний текст джерела杨纯臻 and Chunzhen Yang. "Metal/metal oxide nanoparticles supported on nanostructured carbons for electrochemical applications." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2013. http://hdl.handle.net/10722/193414.
Повний текст джерелаpublished_or_final_version
Chemistry
Doctoral
Doctor of Philosophy
ANDREOZZI, ANDREA. "Fabrication of nanostructured materials using block copolymer based lithography." Doctoral thesis, Università degli Studi di Milano-Bicocca, 2012. http://hdl.handle.net/10281/28333.
Повний текст джерелаWen, Xiaogang. "Organized one dimensional nanomaterials : from preparations to applications /." View abstract or full-text, 2005. http://library.ust.hk/cgi/db/thesis.pl?CHEM%202005%20WEN.
Повний текст джерелаMothoa, Sello Simon. "Synthesis and characterizations of nanostructured MnO2 electrodes for supercapacitors applications." Thesis, University of the Western Cape, 2010. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_5315_1307681987.
Повний текст джерелаThe objective of this research was to develop highly efficient and yet effective MnO2 electrode materials for supercapacitors applications. Most attention had focussed on MnO2 as a candidate for pseudo-capacitor, due to the low cost of the raw material and the fact that manganese is more environmental friendly than any other transition metal oxide system. The surface area and pore distribution of MnO2 can be controlled by adjusting the reaction time. The MnO2 synthesised under optimum conditions display high capacitance, and exhibit good cycle profile. This work investigates the ways in which different morphological structures and pore sizes can affect the effective capacitance. Various -MnO2 were successfully synthesised under low temperature conditions of 70 oC and hydrothermal conditions at 120 oC. The reaction time was varied from 1 to 6 hours to optimise the conditions. KMnO4 was reduced by MnCl.H2O under low temperature, whereas MnSO4.4H2O, (NH4)2S2O8 and (NH4)2SO4 were co-precipitated under hydrothermal conditions in a taflon autoclave to synthesise various -MnO2 nano-structures.
Mangu, Raghu. "NANOSTRUCTURED ARRAYS FOR SENSING AND ENERGY STORAGE APPLICATIONS." UKnowledge, 2011. http://uknowledge.uky.edu/gradschool_diss/207.
Повний текст джерелаDai, Qing. "Fabrication of patterned one dimension nanomaterials for nanophotonic applications." Thesis, University of Cambridge, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.610387.
Повний текст джерелаMoore, Daniel Frankel. "Novel ZnS Nanostructures: Synthesis, Growth Mechanism, and Applications." Diss., Available online, Georgia Institute of Technology, 2006, 2006. http://etd.gatech.edu/theses/available/etd-10262006-121555/.
Повний текст джерелаWang, Zhong, Committee Chair ; Snyder, Robert, Committee Member ; Wong, C.P., Committee Member ; Summers, Christopher, Committee Member ; Nie, Shuming, Committee Member.
Gao, Jinhao. "Multifunctional magnetic nanoparticles : design, synthesis, and applications /." View abstract or full-text, 2008. http://library.ust.hk/cgi/db/thesis.pl?CHEM%202008%20GAO.
Повний текст джерелаBasnayaka, Punya A. "Development of Nanostructured Graphene/Conducting Polymer Composite Materials for Supercapacitor Applications." Scholar Commons, 2013. http://scholarcommons.usf.edu/etd/4864.
Повний текст джерелаMerlettini, Andrea <1989>. "Micro-nanostructured polymeric materials with specific functionalities for advanced biomedical applications." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2019. http://amsdottorato.unibo.it/8834/1/Thesis_Merlettini.pdf.
Повний текст джерелаBovo, Laura. "Nanostructured Materials Based on ZnO for Cataltytic, Optical and Magnetic Applications." Doctoral thesis, Università degli studi di Padova, 2011. http://hdl.handle.net/11577/3423214.
Повний текст джерелаMateriali a base di ZnO, in particolare nano-polveri di Zn1-xTMxO (TM = Mn, Co, Cu), sono stati sintetizzati via Sol gel per studiarne le proprietà in tre diversi campi applicativi quali la catalisi, l’ottica ed il magnetismo. Tali materiali sono stati caratterizzati utilizzando diverse tecniche, complementari tra loro, quali X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS) e UV-Vis Spectroscopy. X-ray Absorption Spectroscopy (XAS) ed Electron Paramagnetic Resonance (EPR) vengono invece impiegate per studiare le proprietà elettroniche e di struttura fine delle nano-polveri. Tali caratterizzazioni si sono dimostrate fondamentali per la comprensione delle proprietà del sistema ed, in particolare, per cercare di identificare le interazioni sussistenti tra struttura, composizione, morfologia dei materiali e la loro capacità di espletare una determinata funzionalità. Nano-polveri di ZnO tal quali e drogate con ioni rame vengono testate come catalizzatori nella reazione di Steam Reforming del metanolo. I risultati ottenuti in questo studio dimostrano il ruolo attivo dell’ossido di zinco nel processo catalitico, contrariamente a quanto solitamente accettato in letteratura. La relazione sussistente tra struttura-attività nei catalizzatori a base di ZnO permette di ottenere informazioni circa l’effettiva funzione di ogni componente, aspetto di estrema importanza per la progettazione razionale di catalizzatori con elevate performance. Le proprietà di luminescenza dei sistemi drogati Zn1-xTMxO vengono studiate mediante spettroscopia X-ray Excited Optical Luminescence (XEOL); tali esperimenti forniscono una migliore comprensione del rapporto che sussiste tra la struttura elettronica dei sistemi in esame e le loro proprietà di emissione. I risultati mostrano come sia possibile modulare la luminescenza di ZnO prodotto via Sol gel modificando le condizioni di sintesi – i.e. temperatura di trattamento, natura e concentrazione del metallo di transizione utilizzato come drogante. Infine, risultati preliminari sulle proprietà magnetiche dei materiali ottenuti mediante SQUID magnetometer (Superconducting Quantum Interference Devices) hanno rivelato la coesistenza di diversi contributi magnetici. Nonostante ulteriori caratterizzazioni siano sicuramente necessarie, questo studio si è rivelato un passo avanti verso una comprensione della natura delle interazioni magnetiche in tali sistemi, da tempo causa di vivace dibattito nella comunità scientifica.
Wang, Shu Jun. "Applications of graphene for transparent conductors and polymer nanocomposites /." View abstract or full-text, 2009. http://library.ust.hk/cgi/db/thesis.pl?MECH%202009%20WANGS.
Повний текст джерелаMohin, Jacob W. "Nanostructured π-Electron Materials for Energy Applications Derived from Macromolecular Self-Assembly". Research Showcase @ CMU, 2015. http://repository.cmu.edu/dissertations/1045.
Повний текст джерелаGiuffrida, Antonino Emanuele. "Surface engineered nanostructured oxides as multifunctional materials for environmental and biomedical applications." Doctoral thesis, Università di Catania, 2017. http://hdl.handle.net/10761/3898.
Повний текст джерелаROONEY, MILES. "Self-assembled, nanostructured organic materials for applications in electronics and optoelectronic devices." Doctoral thesis, Università degli Studi di Milano-Bicocca, 2018. http://hdl.handle.net/10281/199099.
Повний текст джерелаthe investigation of two methods for molecular control of the nano-morphology of opto-electronic devices. Firstly, a photocrosslinking method for creating insoluble semiconductor layers suitable for organic photovoltaic devices. A large series of squaraine based semiconductors are investigated in a bulk heterojunction device. This approach is extended to diketopyrrolopyrrole and naphthalene diimide semiconducting cores. Detailed study of the materials film structure is carried out. The second approach is an investigation of the applicability of latent pigments for organic opto-electronics. A series of organic photovoltaics are produced in planar bilayer and bulk heterojunction architectures. The thin film devices are tested with a variety of interlayers and processing parameters. The control of the nanostructure of these thin film devices is examined with X-ray studies. Incorporating X-ray reflectivity, Specular x-ray, Gradient temperature X-ray and grazing wide angle x-ray studies. In this manner the bulk and interfaces of thin film devices can be examined and characterised. The latent pigment approach is also applied to the field of organic field effect transistors as the active semiconducting layer. The solvent resistant nature of a parent semiconducting pigment shows a substantial benefit to the fabrication of such devices. The unique crystalline rearrangement which occurs upon deprotection of a latent pigment results in an improvement in charge carrier mobility of up to three orders of magnitude while extending the processing possibilities of the subsequent deposition steps required to complete an organic field effect transistor These two techniques are developed with the thoughts of industrial compatibility in mind. As such, a novel synthetic method for facile, cheap, and environmentally friendly production of organic semiconductors is explored. A micellar reaction environment is created through the use of the common surfactant and drug excipient Kolliphor EL. The unique oxygen free core of this surfactant offers a new environment for carrying out common cross coupling reactions such as Suzuki-Miyaura, Stille and Heck reactions in air and water at ambient temperature. High Yields of over 90% are recovered for complex organic semiconducting cores. The versatility of this approach is extended by the use of toluene as a co-solvent. This co-solvent system results in the development of an emulsion which can be used to perform complex chemistries. Emulsion chemistry offers a unique way to synthesis complex organic semiconductors with low metallic catalyst loading at high yield.