Добірка наукової літератури з теми "Nanofilled composites"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Nanofilled composites".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Nanofilled composites"
Hamdi, K., Z. Aboura, W. Harizi, and K. Khellil. "Improvement of the electrical conductivity of carbon fiber reinforced polymer by incorporation of nanofillers and the resulting thermal and mechanical behavior." Journal of Composite Materials 52, no. 11 (August 30, 2017): 1495–503. http://dx.doi.org/10.1177/0021998317726588.
Повний текст джерелаYang, Guoqing, Junda Cui, Yoshimichi Ohki, Deyi Wang, Yang Li, and Kai Tao. "Dielectric and relaxation properties of composites of epoxy resin and hyperbranched-polyester-treated nanosilica." RSC Advances 8, no. 54 (2018): 30669–77. http://dx.doi.org/10.1039/c8ra05846f.
Повний текст джерелаAngerame, D., and M. De Biasi. "Do Nanofilled/Nanohybrid Composites Allow for Better Clinical Performance of Direct Restorations Than Traditional Microhybrid Composites? A Systematic Review." Operative Dentistry 43, no. 4 (July 1, 2018): E191—E209. http://dx.doi.org/10.2341/17-212-l.
Повний текст джерелаChandra, Johanna, Laksmiari Setyowati, and Setyabudi Setyabudi. "Kekasaran Permukaan Resin Komposit Nanofilled dan Nanohybrid Setelah Paparan Asap Rokok Kretek." Conservative Dentistry Journal 8, no. 1 (December 4, 2019): 30. http://dx.doi.org/10.20473/cdj.v8i1.2018.30-35.
Повний текст джерелаSetyowati, Laksmiari, S. Setyabudi, and Johanna Chandra. "Surface roughness of nanofilled and nanohybrid composite resins exposed to kretek cigarette smoke." Dental Journal (Majalah Kedokteran Gigi) 51, no. 1 (March 31, 2018): 37. http://dx.doi.org/10.20473/j.djmkg.v51.i1.p37-41.
Повний текст джерелаDresch, W., S. Volpato, J. C. Gomes, N. R. Ribeiro, A. Reis, and A. D. Loguercio. "Clinical Evaluation of a Nanofilled Composite in Posterior Teeth: 12-month Results." Operative Dentistry 31, no. 4 (July 1, 2006): 409–17. http://dx.doi.org/10.2341/05-103.
Повний текст джерелаGoulart, Marcelo, Deisi Fátima Damin, Rafael Melara, and Andréa De Azevedo Brito Conceição. "Effect of pre-heating composites on film thickness." Journal of Research in Dentistry 1, no. 4 (December 13, 2013): 274. http://dx.doi.org/10.19177/jrd.v1e42013274-280.
Повний текст джерелаWidyaningrum, Sindy, Purwanto Agustiono, and Harsini Harsini. "Surface roughness and colour changes of nanofilled composite resin after immersion in yogurt drink." Majalah Kedokteran Gigi Indonesia 6, no. 3 (July 30, 2021): 149. http://dx.doi.org/10.22146/majkedgiind.41479.
Повний текст джерелаOzsoy, Iskender, Adullah Mimaroglu, and Huseyin Unal. "Influence of micro- and nanofiller contents on friction and wear behavior of epoxy composites." Science and Engineering of Composite Materials 24, no. 4 (July 26, 2017): 485–94. http://dx.doi.org/10.1515/secm-2014-0262.
Повний текст джерелаTonholo, Josealdo, Roberta Alves Pinto Moura Penteado, José Ginaldo Júnior, Milton Fernando de Andrade Silva, Celso da Silva Queiroz, Vanessa Cavalli, Marcos Augusto do Rego, and Priscila Christiane Suzy Liporoni. "Evaluation of Surface Roughness of Microhybrid and Nanofilled Composites after pH-Cycling and Simulated Toothbrushing." Journal of Contemporary Dental Practice 11, no. 6 (2010): 17–24. http://dx.doi.org/10.5005/jcdp-11-6-17.
Повний текст джерелаДисертації з теми "Nanofilled composites"
Masouras, Konstantinos. "Elastic and surface properties of model nanofilled resin-composites." Thesis, University of Manchester, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.509838.
Повний текст джерелаScotti, Nicola. "Laboratory evaluation of several nanofilled dental resin composites: mechanical and chemical properties." Doctoral thesis, Università degli studi di Trieste, 2015. http://hdl.handle.net/10077/10899.
Повний текст джерелаThe present thesis focused on nanofilled dental resins. The first year activity focused on depth of cure analysis of nanofilled composites. The second year activity focused on hardness, depth of cure and shrinkage stress analysis of bulk fill resin composites. The third year focused on degree of conversion and hardness of nanofilled resin cements.
XXVII Ciclo
1980
Raza, Mohsin Ali. "Carbon nanofiller-based composites for thermal interface applications." Thesis, University of Leeds, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.574596.
Повний текст джерелаSILVA, MARIANA DO NASCIMENTO. "GRAPHENE AS NANOFILLER IN COMPOSITES FOR ANTICORROSIVE PROTECTION." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2018. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=36392@1.
Повний текст джерелаCOORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
PROGRAMA DE SUPORTE À PÓS-GRADUAÇÃO DE INSTS. DE ENSINO
PROGRAMA DE SUPORTE À PÓS-GRADUAÇÃO DE INSTITUIÇÕES COMUNITÁRIAS DE ENSINO PARTICULARES
O nanocompósito estudado com função de revestimento anticorrosivo é constituído de Epóxi Novolac Tipo II aditivado com grafeno, sintetizado através do processo de esfoliação/redução do grafite empregando microondas. O sistema epóxi utilizado é composto pelos componentes: A, baseado em bisfenol F e cargas inorgânicas, e o B, endurecedor baseado em um polímero aminado. A síntese do grafeno e sua aditivação no componente A, foram realizadas pelo CTNano - UFMG. O principal objetivo desta dissertação é o estudo da aplicabilidade do nanocompósito, onde o grafeno é utilizado como aditivo complementar em matriz polimérica (epóxi), como alternativa de maximizar a proteção anticorrosiva. Foram estudadas diferentes aditivações: CR (sem aditivo), e aditivadas (0.1 por cento e 0.5 por cento). O substrato utilizado foi o aço carbono 1020, cuja superfície foi preparada com jateamento abrasivo e em seguida revestida com uma pistola de ar comprimido e com solvente para auxiliar o processo. Para avaliar a eficiência destes revestimentos foram realizados ensaios de corrosão (Célula Atlas e Ensaios Cíclicos), teste de aderência (Pull Off), medida de espessura (MEV) e rugosidade do substrato através do rugosímetro analógico e microscopia óptica. Para a dispersão do grafeno foi adicionado diglidil éter de bisfenol A (DGEBA) como um diluente. Os resultados obtidos indicaram que o grafeno apresentava boa dispersão na matriz polimérica. Concentrações de grafeno acima de 0,1 por cento em massa levam à falha da proteção anticorrosiva. Este comportamento pode estar relacionado à presença de solvente residual ou DGEBA não reagido no sistema com grafeno, além de possível atuação de grafeno agregado como ponto de tensão. O mecanismo de adesão revestimento/substrato permaneceu inalterado para todas as aditivações estudadas.
The studied nanocomposite with anticorrosive coating function is composed of Novolac Type II epoxy added with graphene, synthesized through the process of exfoliation / reduction of graphite using microwaves. The epoxy system used consists of the following components: A, based on bisphenol F and inorganic fillers, and B, hardener based on an amino polymer. The synthesis of graphene and its additivation in component A were performed by CTNano - UFMG. The main objective of this dissertation is the study of the applicability of the nanocomposite, where graphene is used as complementary additive in polymer matrix (epoxy), as an alternative to maximize anticorrosive protection. Different additives were studied: CR (without additive), and additives (0.1 percent and 0.5 percent). The substrate used was carbon steel 1020, the surface of which was prepared with abrasive blasting and then coated with a compressed air and solvent gun to aid the process. To evaluate the efficiency of these coatings were performed corrosion tests (Atlas Cell and Cyclic Tests), Pull Off test, thickness measurement (MEV) and roughness of the substrate through the analogous rugosimeter and optical microscopy. For the dispersion of graphene, diglycidyl ether of bisphenol A (DGEBA) was added as a diluent. The results indicated that graphene showed good dispersion in the polymer matrix. Concentrations of graphene above 0.1 percent by mass lead to failure of the anticorrosive protection. This behavior may be related to the presence of residual solvent or unreacted DGEBA in the graphene system, in addition to the possibility of aggregated graphene as voltage point. The coating / substrate adhesion mechanism remained unchanged for all additives studied.
Xiang, Dong. "Processing and properties of melt processed high density polyethylene-carbon nanofiller composites." Thesis, Queen's University Belfast, 2015. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.676504.
Повний текст джерелаKelnar, I. "Polymer-polymer Microfibrillar Composites: Effect of Nanofillers on Structure and Properties." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35451.
Повний текст джерелаLutz, Vincent. "Carbon nanotubes as nanofillers or fibers for multifunctional epoxy-based composites." Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0039.
Повний текст джерелаNowadays, polymer-matrix composites reinforced with carbon fibers are increasingly used in the whole transport sector (aerospace, automotive and railway industries). However, the obtained parts still suffer from low impact resistance and low damage tolerance. To improve these properties, the matrix precursors have to be combined with organic or inorganic compounds to lead to multi-phased matrices. Among them, carbon nanotubes (CNT) are especially promising for targeting multi-scale reinforcement. Since high quality of the parts are required, continuous-fibers-reinforced composites can be produced by resin transfer molding (RTM) which also offers a reduced cost if compared with high temperature- and high pressure-based processes. However, RTM requires a very low viscosity of the polymer precursors and CNT-filled precursors are far too viscous to be injected on dry performs. In addition, this strategy does not allow for a control of the CNT location and orientation in the final part. In this study, innovative ways have been developed to insert CNT in the preform with local positioning and defined orientation. Deliveries of CNT in the matrix, from a neat carbon multi-nanotubes fiber produced by direct spinning, or from a CNT grown on carbon fiber were investigated in two types of epoxy matrices (with very different TG). Different polymer matrix/fiber interfaces have been generated using neat carbon multi-nanotubes fiber, CNT grown on carbon fiber and conventional carbon fiber, with or without sizing. A fine mechanical characterization of various fibers and particularly the measurement of single fiber interfacial properties have been performed in order to determine mechanical performance of continuous fiber reinforced composites. In addition, the nature of adhesion and quality of matrix/fiber interface have been fully evaluated by different multi-scale analyses and suitable microstructural observations
LASIO, BARBARA. "Fabrication of Cu-based metal matrix composites reinforced with carbon nanofillers." Doctoral thesis, Università degli Studi di Cagliari, 2019. http://hdl.handle.net/11584/260760.
Повний текст джерелаWang, X., Q. Zheng, S. Dong, Ashraf F. Ashour, and B. Han. "Interfacial characteristics of nano-engineered concrete composites." Elsevier, 2020. http://hdl.handle.net/10454/17954.
Повний текст джерелаThis study investigates the interfacial characteristics between aggregates and cement paste matrix in nanofillers modified concrete. A three-point bend test on the specimens composed of two pieces of aggregates bonded with a thin layer of cement pastes with/without nanofillers was carried out to characterize the interfacial bond strength of the composites. The scanning electron microscope observations and energy dispersive x-ray spectrometry analysis were also performed to characterize the interfacial microstructures and compositions of the composites. The experimental results indicated that the nanocomposites have higher interfacial bond strength and narrower interfacial transition zone thickness as well as more optimized intrinsic compositions and microstructures than that of composites without nanofillers. Specifically, the interfacial bond strength of nanocomposites can reach 7.67 MPa, which is 3.03 MPa/65.3% higher than that of composites without nanofillers. The interfacial transition zone thickness of nanocomposites ranges from 9 μm to 12 μm, while that of composites without nanofillers is about 18 μm. The ratio of CaO to SiO2 in the interface of composites without nanofillers is 0.69, and that of nanocomposites increases to 0.75–1.12. Meanwhile, the nanofiller content in nanocomposite interface is 1.65–1.98 times more than that in the bulk matrix. The interfacial microstructures of nanocomposites are more compact and the content and crystal size of calcium hydroxide were significantly reduced compared with that of composites without nanofillers.
The National Science Foundation of China (51978127 and 51908103), and the China Postdoctoral Science Foundation (2019M651116).
Jumahat, Aidah. "Effect of nanofillers on thermo-mechanical properties of polymers and composite laminates." Thesis, University of Sheffield, 2011. http://etheses.whiterose.ac.uk/12875/.
Повний текст джерелаКниги з теми "Nanofilled composites"
Tjong, Sie Chin. Polymer Composites with Carbonaceous Nanofillers. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2012. http://dx.doi.org/10.1002/9783527648726.
Повний текст джерелаTjong, Sie Chin. Polymer Composites with Carbonaceous Nanofillers: Properties and Applications. Wiley & Sons, Incorporated, John, 2012.
Знайти повний текст джерелаTjong, Sie Chin. Polymer Composites with Carbonaceous Nanofillers: Properties and Applications. Wiley & Sons, Incorporated, John, 2012.
Знайти повний текст джерелаTjong, Sie Chin. Polymer Composites with Carbonaceous Nanofillers: Properties and Applications. Wiley & Sons, Limited, John, 2012.
Знайти повний текст джерелаTjong, Sie Chin. Polymer Composites with Carbonaceous Nanofillers: Properties and Applications. Wiley & Sons, Incorporated, John, 2012.
Знайти повний текст джерелаPolymer Composites With Carbonaceous Nanofillers Propterties And Applications. Wiley-VCH Verlag GmbH, 2012.
Знайти повний текст джерелаNurazzi, N. M., A. Khalina, S. M. Sapuan, and R. A. Ilyas. Synthetic and Natural Nanofillers in Polymer Composites: Properties and Applications. Elsevier Science & Technology, 2023.
Знайти повний текст джерелаNurazzi, N. M., A. Khalina, S. M. Sapuan, and R. A. Ilyas. Synthetic and Natural Nanofillers in Polymer Composites: Properties and Applications. Elsevier Science & Technology, 2023.
Знайти повний текст джерелаЧастини книг з теми "Nanofilled composites"
Rothon, Roger. "Nanofillers." In Polymers and Polymeric Composites: A Reference Series, 1–21. Berlin, Heidelberg: Springer Berlin Heidelberg, 2016. http://dx.doi.org/10.1007/978-3-642-37179-0_78-1.
Повний текст джерелаBoonmahitthisud, Anyaporn, Anyaporn Boonmahitthisud, Saowaroj Chuayjuljit, and Takaomi Kobayashi. "Encapsulation of Inorganic Renewable Nanofiller." In Handbook of Composites from Renewable Materials, 143–64. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2017. http://dx.doi.org/10.1002/9781119441632.ch68.
Повний текст джерелаGhose, Subrata, K. A. Watson, D. M. Delozier, D. C. Working, John W. Connell, J. G. Smith, Y. P. Sun, and Y. Lin. "Thermal Conductivity of Polyimide/Carbon Nanofiller Blends." In Advances in Composite Materials and Structures, 749–52. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-427-8.749.
Повний текст джерелаParihar, Vijay Singh, Ankit Baranwal, Vikas Gautam, Shikhar Bajpai, Anurag Gupta, and K. L. A. Khan. "A Review of Nanofiller Coating on FRP Composites." In Lecture Notes in Mechanical Engineering, 419–25. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8704-7_52.
Повний текст джерелаBhat, A. H., Imran Khan, Mohd Amil Usmani, and Jahangir Ahmad Rather. "Bioplastics and Bionanocomposites Based on Nanoclays and Other Nanofillers." In Nanoclay Reinforced Polymer Composites, 115–39. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1953-1_5.
Повний текст джерелаNguyen, Dang Mao, Patrick Perré, Thi Phuong Thao Nguyen, Quoc Bao Bui, and DongQuy Hoang. "Recent Advances in Nanofillers for Multidisciplinary Applications of Polymer Nanocomposites." In Mineral-Filled Polymer Composites, 67–99. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003221012-4.
Повний текст джерелаHan, Wei, Youhong Tang, and Lin Ye. "Carbon Fibre-Reinforced Polymer Laminates with Nanofiller-Enhanced Multifunctionality." In The Structural Integrity of Carbon Fiber Composites, 171–97. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-46120-5_8.
Повний текст джерелаZadeh, Khadija, Sadiya Waseem, Kishor Kumar Sadasivuni, Kalim Deshmukh, Aqib Muzaffar, M. Basheer Ahamed, and Mariam Al-Ali AlMaadeed. "Processing and Industrial Applications of Sustainable Nanocomposites Containing Nanofillers." In Sustainable Polymer Composites and Nanocomposites, 451–78. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-05399-4_17.
Повний текст джерелаBansal, Tanmay, Suraj Malik, Tushar Batra, Munna Shah, Anurag Gupta, and K. L. A. Khan. "Review of Effect of Nanofillers on FRP Composites." In Lecture Notes in Mechanical Engineering, 411–17. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8704-7_51.
Повний текст джерелаJastrzębska, M., and M. Rutkowska. "Water Sorption in Polyester/Dust/Glass Polyester Recyclate Composites with Nanofillers." In Advanced Materials, Polymers, and Composites, 183–91. New York: Apple Academic Press, 2021. http://dx.doi.org/10.1201/9781003105015-13.
Повний текст джерелаТези доповідей конференцій з теми "Nanofilled composites"
Abdel Hamid, Dalia, Amal Esawi, Inas Sami, and Randa Elsalawy. "Characterization of Nano- and Micro-Filled Resin Composites Used as Dental Restorative Materials." In ASME 2008 2nd Multifunctional Nanocomposites and Nanomaterials International Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/mn2008-47053.
Повний текст джерелаGuadagno, Liberata, Umberto Vietri, Maria Sarno, Marialuigia Raimondo, Claudia Cirillo, and Paolo Ciambelli. "Nanofilled epoxy adhesives for structural applications." In TIMES OF POLYMERS (TOP) AND COMPOSITES 2014: Proceedings of the 7th International Conference on Times of Polymers (TOP) and Composites. AIP Publishing LLC, 2014. http://dx.doi.org/10.1063/1.4876860.
Повний текст джерелаGreco, Antonio, Francesca Lionetto, and Alfonso Maffezzoli. "Nanofilled polyethylene terephthalate fibers for the production of hierarchical polymer based composites." In 2015 1st Workshop on Nanotechnology in Instrumentation and Measurement (NANOFIM). IEEE, 2015. http://dx.doi.org/10.1109/nanofim.2015.8425364.
Повний текст джерелаBian, Shanshan, Shesha H. Jayaram, and Edward A. Cherney. "Improvements to the erosion resistance of nanofilled silicone rubber composites by electrospinning." In 2012 IEEE Conference on Electrical Insulation and Dielectric Phenomena - (CEIDP 2012). IEEE, 2012. http://dx.doi.org/10.1109/ceidp.2012.6378887.
Повний текст джерелаTiano, Thomas, Margaret Roylance, Benjamin Harrison, and Richard Czerw. "Intralaminar Reinforcement for Biomimetic Toughening of Bismaleimide Composites Using Nanostructured Materials." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81689.
Повний текст джерелаGhose, Sayata, Kent A. Watson, Holly A. Elliott, Dennis C. Working, Jim M. Criss, Kenneth L. Dudley, Emilie J. Siochi, and John W. Connell. "Fabrication and Characterization of High Temperature Resin/Carbon Nanofiller Composites." In ASME 2006 Multifunctional Nanocomposites International Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/mn2006-17016.
Повний текст джерелаKARIMI, POUYAN, SOHAN KALE, FERESHTEH A. SABET, MARTIN OSTOJA-STARZEWSKI, and IWONA JASIUK. "Nanofiller Geometry Effects on Electrical Properties of Composites." In American Society for Composites 2017. Lancaster, PA: DEStech Publications, Inc., 2017. http://dx.doi.org/10.12783/asc2017/15345.
Повний текст джерелаI. Mourad, Abdel-Hamid, Mouza S. Al Mansoori, Lamia A. Al Marzooqi, Farah A. Genena, and Nizamudeen Cherupurakal. "Optimization of Curing Conditions and Nanofiller Incorporation for Production of High Performance Laminated Kevlar/Epoxy Nanocomposites." In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-85067.
Повний текст джерелаKontou, Evangelia, Michael Niaounakis, A. D’Amore, Domenico Acierno, and Luigi Grassia. "Comparing Nanofillers in Polylactide Nanocomposites." In V INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2010. http://dx.doi.org/10.1063/1.3455547.
Повний текст джерелаSarlin, Juha, Kirsi Immonen, A. D’Amore, Domenico Acierno, and Luigi Grassia. "PP composites with Hybrid Nanofillers: NTC phenomenon." In V INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES. AIP, 2010. http://dx.doi.org/10.1063/1.3455674.
Повний текст джерела