Добірка наукової літератури з теми "Nano Molding"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Nano Molding".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Nano Molding"
Ito, Hiroshi. "Micro-/Nano-Molding." Seikei-Kakou 30, no. 7 (June 25, 2018): 371–78. http://dx.doi.org/10.4325/seikeikakou.30.371.
Повний текст джерелаITO, Hiroshi. "Nano/Micro-Molding." Journal of the Japan Society for Technology of Plasticity 57, no. 663 (2016): 340–44. http://dx.doi.org/10.9773/sosei.57.340.
Повний текст джерелаZhang, Nan, Cormac J. Byrne, David J. Browne, and Michael D. Gilchrist. "Towards nano-injection molding." Materials Today 15, no. 5 (May 2012): 216–21. http://dx.doi.org/10.1016/s1369-7021(12)70092-5.
Повний текст джерелаChoi, Doo Sun, Tae Jin Je, Young Ho Seo, and Kyung Hyun Whang. "Nano Pattern Mold Technology Using Nano Stamper Based on Quartz." Key Engineering Materials 277-279 (January 2005): 912–18. http://dx.doi.org/10.4028/www.scientific.net/kem.277-279.912.
Повний текст джерелаITO, Hiroshi. "Polymer Micro-and Nano-Molding." Journal of the Japan Society for Technology of Plasticity 52, no. 610 (2011): 1143–47. http://dx.doi.org/10.9773/sosei.52.1143.
Повний текст джерелаSchift, Helmut, Sunggook Park, and Jens Gobrecht. "Nano-Imprint-Molding Resists for Lithography." Journal of Photopolymer Science and Technology 16, no. 3 (2003): 435–38. http://dx.doi.org/10.2494/photopolymer.16.435.
Повний текст джерелаMao, Huajie, Bo He, Wei Guo, Lin Hua, and Qing Yang. "Effects of Nano-CaCO3 Content on the Crystallization, Mechanical Properties, and Cell Structure of PP Nanocomposites in Microcellular Injection Molding." Polymers 10, no. 10 (October 17, 2018): 1160. http://dx.doi.org/10.3390/polym10101160.
Повний текст джерелаAmano, Akira. "Nano-Level Surface Machining for Molding Die." Seikei-Kakou 21, no. 4 (March 20, 2009): 172–77. http://dx.doi.org/10.4325/seikeikakou.21.172.
Повний текст джерелаYoo, Young Eun, Young Ho Seo, Seong Kon Kim, Tai Jin Je, and Doo Sun Choi. "Injection Molding Nano and Micro Pillar Arrays." Key Engineering Materials 326-328 (December 2006): 449–52. http://dx.doi.org/10.4028/www.scientific.net/kem.326-328.449.
Повний текст джерелаNishiyabu, Kazuaki, Kenichi Kakishita, and Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders." Materials Science Forum 534-536 (January 2007): 381–84. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.381.
Повний текст джерелаДисертації з теми "Nano Molding"
Sorgato, Marco. "Characterization of the micro injection molding of micro- and nano- structured polymer surfaces." Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3424332.
Повний текст джерелаTra i processi per la produzione di componenti micro e nano strutturati, il processo di micro stampaggio a iniezione presenta una serie di vantaggi che lo rendono commercialmente interessante. Tale tecnologia è caratterizzata da un elevato grado di riproducibilità, che la rende idonea alla produzione di massa di micro componenti in materiale termoplastico. Parlando di micro prodotti, la qualità del pezzo stampato risulta essere di fondamentale importanza e per questo, negli ultimi decenni, lo studio dei fattori che influenzano la qualità del prodotto finito, sono stati al centro di numerose indagini. Questo lavoro di tesi si pone come obbiettivo l'analisi del processo di micro stampaggio per la produzione di componenti micro e nano strutturati aventi features ad elevato rapporto di forma. Lo studio si concentra soprattutto sulle limitazioni del processo, utilizzando come casi studio delle geometrie particolarmente critiche per il micro stampaggio a iniezione. La caratterizzazione del processo e l'individuazione dei sui limiti sono stati indagati non solo considerando i parametri che influenzano la qualità del prodotto finito, ma anche le proprietà dei materiali termoplastici impiegati, l'interazione tra materiale plastico e stampo, e l'utilizzo di tecnologie ausiliarie come il riscaldamento e raffreddamento rapido dello stampo e l'evacuazione forzata dell'aria dalla cavità. I risultati confermano quanto riportato in letteratura e contribuiscono ad estendere lo stato dell'arte sul processo di micro stampaggio a iniezione, il quale rappresenta ad oggi una tecnologia affidabile ed economicamente efficace per la produzione su larga scala di micro componenti in materiale plastico in diversi settori industriali.
Peng, Zirong [Verfasser]. "Nano-scale investigation of the degradation mechanism of multilayer protective coating for precision glass molding / Zirong Peng." Aachen : Shaker, 2018. http://d-nb.info/1186590084/34.
Повний текст джерелаPeng, Cheng-Chang, and 彭成彰. "Nano injection molding and optical property." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/31664322896088917957.
Повний текст джерела國立中央大學
機械工程學系在職專班
102
A rapid, cost-effective and high-throughput process for nanotexturing subwavelength structures with high uniformity using the polycarbonate (PC) is realized via injection nanomolding. The process enables the precise control of nanohole array (NHA) surface topography (nanohole depth, diameter, and periodicity) over large areas thereby presenting a highly versatile platform for fabricating substrates with user-defined, functional performance. Specifically, the optical property of the PC substrates were systematically characterized and tuned through the modulation of the depths of NHA. The aspect ratio submicron holes can be easily modulated and experimentally proven by simply adjusting the molding temperature. The nanotextured depths were reliably fabricated in the range of 200 to 400 nm with a period of approximately 700 nm. The fabricated PC films can reduce the reflectivity from an original bare film of 10.2% and 8.9% to 1.4% and 2.1% with 400-nm depth of nanoholes at the wavelength of 400 and 550 nm, respectively. Compared with conventional moth-like nanostructures with nanopillar arrays with heights adjustable only by an etching process, this paper proposes a facile route with submicron holes to achieve a similar antireflective function, with a significantly reduced time and facile height modulation capability. Furthermore, the effects of multilayer coatings of dielectric and metallic layers on the nanomolded NHA have been performed and potential sensing application is explored.
Wang, Wei-Tsan, and 王唯讚. "Molecular Dynamics Simulation of Molding Filling in Nano-Injection Molding Process." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/32393555864076768289.
Повний текст джерела國立清華大學
化學工程學系
94
In this research, molecular dynamics simulation is adopted to simulate the molding filling in nano-injection molding process. Our work divided into two parts is as follows. (I) Glass transition temperature : Molecular dynamics is adopted to simulate the glass transition temperature of polypropylene at different chain length, and the chain length has 200, 400 and 800 , respectively. The simulated purpose is to explore the relation between the chain length(molecular weight) of polymer and the glass transition temperature of polymer. (II) We adopt molecular dynamics to simulate the nano-scale injection molding process, and investigate the defects during molding filling process. With decreasing the injection velocity, the adsorption phenomena at the entrance of mold will become more obvious. The orientation of polymer is obvious at the wall of runner and the wall which faces the entrance of mold. While the temperature of system at 350 K, polymer has less tendency to adsorb on the wall.
Qiu, S. W., and 邱仕文. "The application of nano-materals in microinjection molding." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/38494403785544433218.
Повний текст джерела龍華科技大學
機械系碩士班
92
The miniaturization of components and systems has been progressing rapidly due to the developments in microelectronics, communication, optoelectronics, and biotechnology. Recently, the use of plastic material is becoming a potential alternative due to its versatile property and ease of batch fabrication. Most micro parts, such as gears and fans, need a strong structural capability to resist abrasive. Only plastic material cannot satisfy this requirement. Fillers or fibers are tried to add into plastic compounds to enforce structural strength. But, compounds and reinforced plastics have not been used successfully in the micro moulding process. Thus, the nano-particles were introduced into plastic to enforce structural strength and improve filling properties. This thesis studied the processing and wearing properties of nano-composites. The filling and wear properties of nano-materials, SiO2, TiO2, and ZnO with 10%, 20%, and 30% weight content, respectively, introduced to PP were tested. The processing characteristics of a mold with 4 cavities and an IC micro-structure were observed. Experimental results show that the shrinkage of micro-parts with high pressure, impact velocity, cooling rate was significantly reduced. However, the shrinkage was slightly increased when mold temperature was promoted. The shrinkage was decreased as nano-particle contents were increased. The nano-composite with 30% SiO2 reduced 55% in shrinkage compared to pure PP. The filling properties of IC micro-structure using ZnO nano-materials had an outstanding result. The filling properties of nano-material with 10% nano-particles were better than those of 20% and 30% nano-particles contents. However, the filling property was worse when POM with bigger particles was introduced. The hardness of nano-composites was increased as the weight content in PP was increased. The nano-material with 30% SiO2 promoted 24% in hardness compared to pure PP. However, wear resistance was decreased as the nano-material content was increased in SiO2 and TiO2. But wear resistance was slightly promoted when ZnO particles were used. From TGA testing, the decomposition was increased and serious in SiO2 and TiO2 resulting melting temperature was decreased. The decomposition was reduced in ZnO resulting the melt temperature was not decreased. The results show that the filling properties were outstanding when nano-particles were introduced into plastic pellets. The wear resistance was reduced if not suitable nano-materials were chosen.
Lu, Ping-Hang, and 呂秉翰. "Molecular Dynamics Simulation of Injection Molding Filling System on Nano-Scale Flow." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/42142350101665855108.
Повний текст джерела國立清華大學
化學工程學系
95
In this research, molecular dynamics simulation is adopted to simulate the glass transition temperature of polyethlene and the molding filling in nano-injection molding process. Our work divided into two parts is as follows. I. Glass transition temperature:Molecular dynamics is adopted to simulate the glass transition temperature of polymer at different chain lengths, and the chain lengths are 100,200,400 and 800, respectively. The purpose of the simulation is to explore not only the relation between the chain length and the glass transition temperature of polymer, but also the relation between the pressure and the glass transition temperature of polymer at the same chain length. II. Unsteady nano injection molding:With increasing chain length, the density of local system gets more uniform.The probability of warpage becomes great with increasing the interaction between metal particle and polymer particle. Besides, the simulation results between Pt and Au are almost the same. However, if the injection velocity is too large, more plastics will be wasted and the filling quality is relatively bad. Finally, when the temperature is on the increase, the polymer gets easier to be processed and the density in the mold gets more uniform.
Ho, Chang-En, and 何長恩. "Study on the Molding of Nano- and Micro-features Using Injection and Imprint Techniques." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/30024667961040932032.
Повний текст джерела龍華科技大學
工程技術研究所
97
In recent years, there is a considerable development in technique which has been a tempting trend of miniaturization in production technology and the techniques which demands the quality and structures which face the role in nanotechnology. In this study, molding of nano-and micro-features using injection and imprint technique is focused. A square, silicon grating in a 3x3 mm2 array, with a depth of 82 nm 1.5µm 0.9µm, and a pitch of 3.0µm. The grating costs only about NT 4000. It provides a simple way to replicate high quality nano-scale molded parts by using a simple custom-made injection machine and hot embossing machine results in manufacturing the different shape and the structure depth nano-and micro-features part. In the injection molding process, nano-and micron structures will be masked in the mold inserts molds with a simple silicon dye using the assist of simple custom-made injection machine. In this technique polymethylmethacrylate (PMMA) and polycarbonate (PC) act as the nano-micro-features. In the analysis the depth of 82 nm and 0.9 μm can be produced by the micro-structural formability. It is a low-cost and fast way to successfully produce high-precision nano-and micro structural elements. The results shows that, when the simple mold and custom-made machine were employed, structure is encountered with the nano-micron micro-structure shape, by improve the mold temperature and injection pressure, which can be a clear edge and the surface of a higher quality. Generally in the press printing process, nano-micro-features structure can be produced 82 nm, 1.5 μm and 0.9 μm can be obtained. An optical film of PMMA and PC is used in molding experiments. The depth of 82 nm, 1.5 μm and 0.9 μm can be produced by the micro-structural formability. To identify the glass transition temperature thermal analysis instruments were used to control the parameters as a reference. For a silicone mold-jet we required the imprinted molding window. A single parameter method is used to investigate the dye temperature imprints pressure, imprint time and ejection temperature of nano and micro-structure for the surface roughness and shape effects. The result shows that, forming a high pressure and imprinted with the injection temperature is linear. If the Injection temperature is closer to the glass transition temperature, will be difficult to form the shapes and also affects the roughness of the most significant process parameters in the ejection temperature. To investigate the surface morphology of the obtained micron-sized structures we require Chanai electron microscopy. Further to make the measurements of height and surface roughness of the samples we use atomic force microscope (AFM), Chennai-micron structure of its.
Huang-YaLin and 林晃業. "Experimental and Analytical Study on Filling of Nano and Micro Structures in Micro Injection Molding." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/91745851280465541640.
Повний текст джерела國立成功大學
航空太空工程學系碩博士班
98
Nano and micro technology is attracting more attention and has increasing applications in recent years. Among the products with applications of nano technology, many of them are made of polymer plastics. Micro injection molding is one of the important processes for polymer plastics. In micro injection molding, the ability for the polymer melt to flow into the micro/nano features is a crucial factor for successful molding. The flow behavior of polymer in micro/nano features needs to be explored further to facilitate the molding process. In this study, we investigated the effects of the processing conditions on the filling of micro/nano features analytically and experimentally. Firstly, mold inserts with micro or nano features were constructed by LIGA-LIKE process. Secondly, an analytical model was developed to model the filling of polymer melt in the micro/nano features. Molding experiments were performed to verify the analytical filling model. With this verified model, a theoretical filling distance can be predicted for the micro/nano injection molding, and the suitable processing conditions can be estimated for different geometries of product. Finally, the Infrared heating system is introduced to improve the penetration distance in nano feature filling.
Tareq, Saif. "Fabrication and characterisation of polymeric nano-composites." Thesis, 2019. http://hdl.handle.net/1959.7/uws:51728.
Повний текст джерелаGoswami, Arjyajyoti. "Development of micro/nano structured surfaces." Thesis, 2017. http://localhost:8080/iit/handle/2074/7445.
Повний текст джерелаКниги з теми "Nano Molding"
Hot Embossing Micro Nano Technologies. William Andrew Publishing, 2009.
Знайти повний текст джерелаTosello, Guido, ed. Latest Advancements in Micro Nano Molding Technologies – Process Developments and Optimization, Materials, Applications, Key Enabling Technologies. MDPI, 2022. http://dx.doi.org/10.3390/books978-3-0365-5433-4.
Повний текст джерелаЧастини книг з теми "Nano Molding"
Abdul Manaf, Ahmad Rosli, and Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications." In Micro/Nano Technologies, 1–30. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6588-0_21-1.
Повний текст джерелаAbdul Manaf, Ahmad Rosli, and Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications." In Micro/Nano Technologies, 1–30. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6588-0_21-2.
Повний текст джерелаAbdul Manaf, Ahmad Rosli, and Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications." In Micro/Nano Technologies, 661–90. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0098-1_21.
Повний текст джерелаLee, H. K., G. E. Yang, and Hong Gun Kim. "Residual Stress and Surface Molding Conditions in Thin Wall Injection Molding." In Macro-, Meso-, Micro- and Nano-Mechanics of Materials, 137–42. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-979-2.137.
Повний текст джерелаZhou, Tianfeng. "Precision Molding of Microstructures on Chalcogenide Glass for Infrared Optics." In Micro/Nano Technologies, 635–59. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0098-1_20.
Повний текст джерелаAbliz, Dilmurat, and Gerhard Ziegmann. "Liquid Composite Molding Processes." In Acting Principles of Nano-Scaled Matrix Additives for Composite Structures, 79–88. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68523-2_5.
Повний текст джерелаYoo, Young Eun, Young Ho Seo, Seong Kon Kim, Tai Jin Je, and Doo Sun Choi. "Injection Molding Nano and Micro Pillar Arrays." In Experimental Mechanics in Nano and Biotechnology, 449–52. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-415-4.449.
Повний текст джерелаShin, Hong Gue, Heon Young Kim, and Byeong Hee Kim. "Nano Molding Technology for Optical Storage Media with Large-Area Nano-Pattern." In Optics Design and Precision Manufacturing Technologies, 925–30. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-458-8.925.
Повний текст джерелаVranić, Edina. "Micro-molding and Its Application to Drug Delivery." In Nano- and Microfabrication Techniques in Drug Delivery, 275–94. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-26908-0_11.
Повний текст джерелаNishiyabu, Kazuaki, Kenichi Kakishita, and Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders." In Progress in Powder Metallurgy, 381–84. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.381.
Повний текст джерелаТези доповідей конференцій з теми "Nano Molding"
Mogi, Katsuo, Yuki Hashimoto, Takatoki Yamamoto, and Takehiko Tsukahara. "Nano-pattern molding technique using photocurable silicone elastomer." In 2015 IEEE 15th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2015. http://dx.doi.org/10.1109/nano.2015.7388788.
Повний текст джерелаWu, Cheng-Hsien, and Wei-Hsu Chen. "Injection molding of grating optical elements with microfeatures." In Smart Materials, Nano-, and Micro-Smart Systems, edited by Jung-Chih Chiao, David N. Jamieson, Lorenzo Faraone, and Andrew S. Dzurak. SPIE, 2005. http://dx.doi.org/10.1117/12.582425.
Повний текст джерелаLi, Sijie, Hongxing Xie, Yun Ye, Sheng Xu, Enguo Chen, and Tailiang Guo. "Injection molding and performance testing of quantum-dot diffusion plate." In Nanophotonics, Micro/Nano Optics, and Plasmonics VIII, edited by Zhiping Zhou, Kazumi Wada, Limin Tong, Zheyu Fang, and Takuo Tanaka. SPIE, 2023. http://dx.doi.org/10.1117/12.2643875.
Повний текст джерелаPark, Jae Hong, Hyun Ik Jang, Jun Yong Park, Seok Woo Jeon, Woo Choong Kim, Hee Yeoun Kim, and Chi Won Ahn. "Advanced nano lithography via soft materials-derived and reversible nano-patterning methodology for molding of infrared nano lenses." In SPIE Advanced Lithography, edited by Douglas J. Resnick and Christopher Bencher. SPIE, 2015. http://dx.doi.org/10.1117/12.2080980.
Повний текст джерелаCui, Liangyu, Zhichen Huo, and Dawei Zhang. "Ultrasonic Molding of Polymer Micro Devices." In 2019 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2019. http://dx.doi.org/10.1109/3m-nano46308.2019.8947356.
Повний текст джерелаShin, Jihyun, Shuji Tanaka, and Masayoshi Esashi. "Nanostructured Silicon Carbide Molds for Glass Press Molding." In 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2007. http://dx.doi.org/10.1109/nems.2007.352019.
Повний текст джерелаLucchetta, Giovanni, Davide Masato, Marco Sorgato, and Nicola Milan. "Effect and Modeling of Ultrasound-Assisted Ejection in Micro Injection Molding." In WCMNM 2018 World Congress on Micro and Nano Manufacturing. Singapore: Research Publishing Services, 2018. http://dx.doi.org/10.3850/978-981-11-2728-1_26.
Повний текст джерелаTom, Alan M., Aleksandar K. Angelov, and John P. Coulter. "An Experimental Investigation of a Micro Injection Molded Mechanical Device." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81968.
Повний текст джерелаShao, Dongbing, Shifeng Li, and Shaochen Chen. "Near-Field nano-molding of gold thin films by a pulsed laser." In ICALEO® 2005: 24th International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2005. http://dx.doi.org/10.2351/1.5060599.
Повний текст джерелаMarco, Sorgato, Masato Davide, and Lucchetta Giovanni. "Injection Molding of Nano-Structured Polylactic Acid Surfaces for Bone Regeneration Studies." In Proceedings of the 4M/ICOMM2015 Conference. Singapore: Research Publishing Services, 2015. http://dx.doi.org/10.3850/978-981-09-4609-8_072.
Повний текст джерелаЗвіти організацій з теми "Nano Molding"
DeSimone, Joseph, Jude Samulski, Jeffrey Frelinger, and Sergio Sheiko. Replicating Viral Particles and other Shape-controlled, Functional Particles for Targeted Delivery Applications Using Nano-molding Techniques. Fort Belvoir, VA: Defense Technical Information Center, October 2007. http://dx.doi.org/10.21236/ada482673.
Повний текст джерелаKennedy, Alan, Andrew McQueen, Mark Ballentine, Brianna Fernando, Lauren May, Jonna Boyda, Christopher Williams, and Michael Bortner. Sustainable harmful algal bloom mitigation by 3D printed photocatalytic oxidation devices (3D-PODs). Engineer Research and Development Center (U.S.), April 2022. http://dx.doi.org/10.21079/11681/43980.
Повний текст джерела