Добірка наукової літератури з теми "Nano modified composite"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Nano modified composite".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Nano modified composite"
Li, Zhenxia, Tengteng Guo, Yukun Chen, Qi Liu, and Yuanzhao Chen. "The properties of nano-CaCO3/nano-ZnO/SBR composite-modified asphalt." Nanotechnology Reviews 10, no. 1 (January 1, 2021): 1253–65. http://dx.doi.org/10.1515/ntrev-2021-0082.
Повний текст джерелаZheng, Li Yun, Zhi Min Liu, and Ya Jun Zhao. "Preparation and Properties of Nano-Hydroxyapatite Modified Nylon Composites." Advanced Materials Research 87-88 (December 2009): 228–32. http://dx.doi.org/10.4028/www.scientific.net/amr.87-88.228.
Повний текст джерелаNie, Hua Wei, Yuan Kang Zhou, Yang Cao, and Guo Qing Li. "Research of Nanometer TiO2/PF Composites and the Properties of Semi-Metallic Friction Material." Advanced Materials Research 631-632 (January 2013): 239–45. http://dx.doi.org/10.4028/www.scientific.net/amr.631-632.239.
Повний текст джерелаTao, He, Hongming Liu, Xiangbing Xie, Tao Sun, Ruipeng Dong, and Xiaolu Lu. "Preparation and Properties of Nano-ZnO Combined with Biomass Heavy Oil Composite-Modified Asphalt." Advances in Materials Science and Engineering 2022 (December 23, 2022): 1–9. http://dx.doi.org/10.1155/2022/5179787.
Повний текст джерелаWu, Chao, Yanfeng Gao, Xidong Liang, Stanislaw M. Gubanski, Qian Wang, Weining Bao, and Shaohua Li. "Manifestation of Interactions of Nano-Silica in Silicone Rubber Investigated by Low-Frequency Dielectric Spectroscopy and Mechanical Tests." Polymers 11, no. 4 (April 19, 2019): 717. http://dx.doi.org/10.3390/polym11040717.
Повний текст джерелаCheng, Zhi Qiang, Gui Hua Pang, Hong Yan Wang, Jun Feng Li, and Xue Zhong Zhao. "Fabrication and Characterization of Poly L-Lactic Acid/Modified Nano-Hydroxyapatite Composite Fibrous Scaffold." Advanced Materials Research 535-537 (June 2012): 1095–99. http://dx.doi.org/10.4028/www.scientific.net/amr.535-537.1095.
Повний текст джерелаMahendrarajah, Ghowsalya, Everson Kandare, and Akbar A. Khatibi. "Enhancing the Fracture Toughness Properties by Introducing Anchored Nano-Architectures at the Metal–FRP Composite Interface." Journal of Composites Science 3, no. 1 (February 13, 2019): 17. http://dx.doi.org/10.3390/jcs3010017.
Повний текст джерелаRong, Zhidan, Mingyu Zhao, and Yali Wang. "Effects of Modified Nano-SiO2 Particles on Properties of High-Performance Cement-Based Composites." Materials 13, no. 3 (February 1, 2020): 646. http://dx.doi.org/10.3390/ma13030646.
Повний текст джерелаJabbar, Fayq Hsan, and Wisam A. Latif. "A Comparative Analysis of Various Types of Modified Bentonite Clays Added to Poly Methyl Butadiene for Nanocomposite Preparation." NeuroQuantology 19, no. 1 (February 18, 2021): 67–71. http://dx.doi.org/10.14704/nq.2021.19.1.nq21010.
Повний текст джерелаTang, Xin De, Xiang Li Kong, Fang Huang, and Jun Li. "Performance Evaluation of Nano-Montmorillonite/SBS Modified Asphalt Paving Mixtures." Materials Science Forum 688 (June 2011): 191–94. http://dx.doi.org/10.4028/www.scientific.net/msf.688.191.
Повний текст джерелаДисертації з теми "Nano modified composite"
Pozegic, Thomas R. "Nano-modified carbon-epoxy composite structures for aerospace applications." Thesis, University of Surrey, 2016. http://epubs.surrey.ac.uk/809603/.
Повний текст джерелаFabbrici, Simone. "Studio delle proprietà meccaniche e smorzanti dei compositi in fibra di carbonio nano-rinforzati." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2020.
Знайти повний текст джерелаChandrasekaran, Swetha [Verfasser], and Karl [Akademischer Betreuer] Schulte. "Development of nano-particle modified polymer matrices for improved fibre reinforced composites / Swetha Chandrasekaran. Betreuer: Karl Schulte." Hamburg-Harburg : Universitätsbibliothek der Technischen Universität Hamburg-Harburg, 2014. http://d-nb.info/1059804107/34.
Повний текст джерелаYuan, Xiaojiao. "Nanostructures based on conjugated polymer polypyrrole for application in photocatalysis Photocatalytic degradation of organic pollutant with polypyrrole nanostructures under UV and visible light Polypyrrole nanostructures modified with mono- and bimetallic nanoparticles for photocatalytic H2 generation Highly active composite TiO2-polypyrrole nanostructures for water and air depollution under visible light irradiation Highly Promoted Photocatalytic Hydrogen Generation by Multiple Electron Transfer Pathways Visible light-driven simultaneous water oxidationand quinone reduction by a nano-structuredconjugated polymer without co-catalysts." Thesis, université Paris-Saclay, 2020. http://www.theses.fr/2020UPASF011.
Повний текст джерелаRecently, π-conjugated polymer nanostructures (CPNs) emerge as a new class of catalysts for various photocatalytic applications such as water splitting, CO2 reduction, water treatment (degradation of organic pollutants and heavy metals reduction). Among the family of CPs, polypyrrole PPy has been the most extensively investigated owing to its environmental stability, facile synthesis, excellent stability. In this thesis, PPy nanostructures were synthesized by different methods: chemical polymerization by soft templates (hexagonal or lamellar mesophases) and polymerization by radiolysis. These PPy nanostructures exhibit promising photocatalytic activity for organic pollutants (phenol and methyl organge) degradation under visible light and their activities are higher than that of PPy- bulk.Besides, we modified TiO2 with nanostructured PPy for photodegradation of organic pollutants (methy orange and phenol as model water pollutants and toluene as air pollutant). The nanocomposite shows an important increase of the photocatalytic performance under UV and visible light compared to bare TiO2 and PPy. This work offers a facile and cheap way to fabricate the heterojunction in organic-inorganic hybrid materials interface and the composite nanomaterials represents a promising photocatalyst for water treatment and indoor application. In another hand, green hydrogen production by photocatalytic water splitting offers a promising way to solve environment and energy issues. In this thesis, we have shown that modified conjugated polymer polypyrrole nanostructures with mono- and bimetallic (Pt, Ni, Pt-Ni) nanoparticles are very active for hydrogen generation, and that a synergistic effect is obtained by alloying Pt with Ni. Lastly, different ternary nanostructures based on PPy-TiO2 composites with controlled active sites modification with Pt nanoparticles were developed ((Pt-PPy)-TiO2, (Pt-TiO2)-PPy and Pt-(PPy-TiO2)). The photocatalytic activity of Pt-(PPy-TiO2) for hydrogen generation under UV and visible light is very high and drastically surpasses those of (Pt-PPy)-TiO2 and (Pt-TiO2)-PPy
Lee, Ching-Hui, and 李慶輝. "Study on anti-corrosion of zinc nano-particle modified composite paint." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/92108174434304775579.
Повний текст джерела國立高雄應用科技大學
機械與精密工程研究所
101
With the rapid development of nanotechnologies and nano-materials since 1990s, the studies on polymer-based nano-composites have been extensively focused on their properties' enhancement. A novel anticorrosion/antibacterial material, zinc/epoxy and zinc/hybrid resin nanocomposites, was prepared via simple mix technique. In this study, a nano-composite coating was formed by incorporating nano-Zinc particle in epoxy and hybrid resin, respectively, to different loading levels from 500~3000ppm (0.05~0.3% by weight). Corrosion performance of the nano-composite coating was evaluated by applying these nano-composites coatings on carbon steel substrate and exposing them to 5% sodium chloride salt-spray testing chamber. Adhesion test, scanning electron microscopy (SEM), X-ray fluorescence (XRF), energy-dispersive spectrometer (EDS) were employed to character these coated with nano-composite substrates. The results of SEM and XRF showed that the nano-composites were a hybrid of the polymer and the zinc nano-particles, and the zinc nanoparticles were distributed uniformly in general. The results of salt spray test showed that nano-zinc in epoxy and hybrid resin could react with permeated oxygen, leading to the improvement of anticorrosion properties of the zinc nanocomposites with addition of desirable of zinc nanoparticles. The corroded area of Zn/epoxy samples more than 80% (without Zn nanoparticle) to less than 5%(3,000ppm Zn nanoparticle) after 500 hours salt spray test. The corroded area of Zn/hybrid resin samples more than 95% (369ppm Zn nanoparticle) to less than 10%(1,343ppm Zn nanoparticle) after 1,500 hours salt spray test. Adhesion of these films has passed the standard test method for measurement by tape test from 4B~5B. The bactericidal properties evaluation showed that the bactericidal ability of the Zn/Epoxy, Zn/Hybrid resin nanocomposites with at least 360ppm of nano-zinc and increased with nano-Zn content remarkably. Also we have carefully examined the synthesis of zinc nanoparticle concentration by inductively coupled plasma mass spectrometry (ICP-MS). In conclusion, the corrosion resistant and antibacterial properties are enhanced with addition of pure zinc nanoparticle.
TSAI, AN-TING, and 蔡安庭. "The Impact Behaviour of Polymer-Based Composite Laminates Modified with Nano-Reinforcement." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/3bnmx4.
Повний текст джерела國立高雄應用科技大學
模具工程系
105
Polymer-based composites have been widely used in in mold decoration (IMD) and main structure-related applications due to their outstanding material properties, such as high stiffness and high strength. However, the impact loading resulted in serious damage of the composite laminates, and consequently the structural stiffness, natural frequency and damping property were decreased. In this study, nano-reinforcements of multi-wall carbon nanotube and carbon nanofiber were used to modify the fiber-reinforced polymer composite laminates. The effect of the laminates modified of with nano-reinforcements on the drop-weight impact behaviour was investigated. The drum-winding machine was used to manufacture carbon fiber prepreg in this study. Out of autoclave (OOA) hot-pressure method was used to form the CFRP laminates. The specimens were then cut by using a CNC machine, and were subjected to drop-weight impact loading. The dynamic tests were performed on the damaged laminates in free-free boundary condition, and an impact hammer was used to create a excitation. The non-destructive inspection (NDI) was used to measure the damage area of the laminates after impact tests. According to the experimental results, the addition of nanotube or nanofiber led to an increase in the impact behaviour and a decrease in the damage area. The laminates modified with nanotube have a relatively high value of damping ratio, compared with the laminates modified with nanofiber. The smaller size the nano-reinforcement was used, the higher level of damping performance and impact bheaviour can be obtained.
Lai, Ying-Hsien, and 賴盈憲. "The influence of modified nano-silica on the properties of composite film." Thesis, 2007. http://ndltd.ncl.edu.tw/handle/43824298691544084328.
Повний текст джерела南台科技大學
化學工程與材枓工程系
95
In this research, organic/inorganic nanocomposite was prepared from acrylic-polyurethane matrix with direct addition of modified silica. Two type of nano-colloidal silica dispersed in difference solvent are grafted with 2-HEMA, the 2-HEMA-g-silica was the polymerized with acrylic monomer forming acrylic polyol. By cross-linked the polyol with polyisocyante, the resultant nanocomposite was used as coating material and has excellent properties in surface hardness, solvent resistance as well as high Tg. However, the surface of coated film tends to loss its gloss with increasing silica content. The second approach to increase interface strength between the two phases was to pre-react the SiO2 particles with polyisocyanate. In this approach, the functional group of -NCO in polyisocyanate was partially reacted with the functional group of -OH on the surface of silica, the reaction was accelerated by the addition of catalyst. A significant improvement in solvent resistance was observed. In addition, the surface of coated film was smooth and glossy.
Chien, Chia-Yu, and 簡家瑜. "Studies on Modified Epoxy Acrylate Nano-composite Resin for Antibacterial Dental Restorative Materials." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/82098954263268449635.
Повний текст джерела國立臺灣大學
高分子科學與工程學研究所
103
In this research, Epoxy acrylate (EA) was modified with isophorone diisocyanate (IPDI) and 2-Hydroxyethyl methacrylate (HEMA) to synthesize HI-EA, which was used as the resin matrix; whereas nano-aluminum oxide (Nano-Al2O3) and nano-silica (Nano-SiO2 ) was used as the inorganic filler to synthesize dental restorative composite resin. In order to overcome the problem of secondary caries, we have added antibacterial and anticavity elements into composite resin. By using materials that can also be used as inorganic filler: fluoride-releasing kaolinite, Epigallocatechin gallate (EGCG), and Nano-zinc antibacterial agent, we produced a series of antibacterial dental composite resins, and furthermore discussed their mechanical properties and antibacterial ability. In the foliated nano-Al2O3/ fluoride-releasing kaolinite series, as the content of the fluoride-releasing kaolinite increased, the antibacterial ability increased too. Also, under the condition of not influencing the mechanical property of the material, adding EGCG improved the antibacterial ability as well. However, due to the texture of kaolinite being quite soft and with limited inorganic content, the result of mechanical property was under expectation. In order to improve the hardness of the self-synthesized composite resins, we produced another series that contained modified nano-SiO2 mixed along with sphered nano-Al2O3 and fluoride-releasing kaolinite. Due to the content of inorganic filler can reach up to 70 wt%, this series has better hardness performance. Also the material has the same antibacterial trend as the foliated nano-Al2O3/ fluoride-releasing kaolinite series. The last part of the research was to use nano-zinc as the antibacterial element to synthesis composite resin. Due to the higher inorganic filler content, this series has a higher performance in hardness compared to products available in the current market. After adding 1000 ppm of nano-zinc antibacterial agent into the composite resin, the materials would have certain antibacterial ability.
Mugadza, Farirai. "Photocatalytic degradation of methyl violet using modified radially aligned nano rutile TiO2-nanodiamonds composite." Thesis, 2020. https://hdl.handle.net/10539/31090.
Повний текст джерелаIn this work, a hydrothermal method was used to synthesize the radially aligned nano rutile (RANR) TiO2,usingTiCl4as a precursor. The synthesis temperatures, as well as the time involved in the refluxing step of the synthesis were varied to obtain the optimum morphology of the resulting TiO2. The optimum refluxing time for RANR TiO2 synthesis was determined to be 16 hours at 180°C. The synthesized RANR TiO2 with dandelion-like shapes had diameters ranging from 300 nm to 800 nm and an average diameter of 560 nm. The RANR TiO2 had BET surface area of 68 m2/g, which is higher than that of the commercially available Degussa P25 (45 m2/g).The RANR TiO2-nanodiamond composites were all synthesized in situ using the hydrothermal method with detonation nanodiamonds ranging from 0.1 to 1% mass loading. BET surface area analysis showed an increase in the surface area of the RANR TiO2 with an increase in the amount of nanodiamonds used in its modification. Raman spectra confirmed the presence of graphitic carbon and rutileTiO2in all the composite samples. The results obtained from XPS analysis showed that oxygen, carbon and titanium were all present in the sample but there was no evidence showing bond formation between titanium and carbon. RANR TiO2 was the most effective in dye degradation due to their nano rod structure, which increases light harvesting properties due to multiple reflections of light. All the other composites did generally well with respect to dandelions in the first hour, but then the rate of degradation decreased which could be attributed to the reduction in photocatalytic active sites due to blockage by reactants. A good dispersion of the nanodiamonds and RANR TiO2(0.1% loading) helped to create strong electronic interphase interactions. This helps to separate the photogenerated electrons and positive holes, thereby increasing photocatalytic efficiency. Calcination increased photocatalytic efficiency because of the increase in crystallinity of materials which reduces electron/hole recombination, the increase in crystallinity was shown by results from Raman spectroscopy. The photocatalyst recyclability studies showed that the recovery of the catalyst after each cycle and the re-use was not effective as the degradation efficiency decreased from 80% to 60% after 3 cycles
CK2021
Ho, Ya-Hui, and 何雅惠. "Preparation, Characterization of Nano Materials with Polymer, Enzyme Composite Film Modified Electrodes and Their Electrocatalytic Applications." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/nfeev2.
Повний текст джерела國立臺北科技大學
化學工程研究所
98
Part I:We developed a novel poly (DDS) doped nano TiO2 composite film on indium tin oxide (ITO) electrode through electropolymerization technique. The electrocatalytic and photoelectrocatalytic studies for NADH oxidation was carried out at the composite film using cyclic voltammetry (CV) and amperometric i-t curve studies. CV results show that irradiation of the composite film surface for 5 min produced an enhanced electrocatalytic oxidation current for NADH which is higher than the electrocatalytic current observed at the composite film without irradiation. The composite film detects NADH in the linear concentration range from 5×10-8 to 1.2×10-7 M. We have characterized the prepared composite film through SEM, AFM and XRD studies. The SEM and AFM results confirm that the composite film has been formed on the ITO surface. XRD results show that the TiO2 NPS are crystalline and belongs to anatase phase. EIS and light induced EIS studies corroborates the electrochemical and photoelectrochemical behavior of different films investigated in this study. Part II:Herein we report a novel amperometric ethanol sensor based on alcohol dehydrogenase immobilized onto poly-L-lysine (PLL) coated carminic acid (CA) functionalized multiwalled carbon nanotubes (MWCNTs). In the present study, we prepared a stable dispersion of MWCNTs using CA, anthraquinone dye as a dispersing agent. The prepared CA functionalized MWCNTs (CACNT) are extremely stable for several months without any precipitation. We have characterized the prepared CACNT and the different films through scanning electron microscopy (SEM), atomic force microscopy (AFM), UV–vis absorption spectroscopy and electrochemical impedance spectroscopy (EIS) studies. SEM and AFM results confirm that MWCNTs form a uniform stable suspension in CA aqueous solution. Both CACNT and the composite film containing CACNT exhibit characteristic UV–vis absorption absorption peak at 280 nm for CA which reveals that MWCNTs are functionalized with CA. The prepared stable CACNT dispersion was coated with poly-L-Lysine film on a glassy carbon electrode (GCE) and used for the immobilization of ADH through the electrostatic interactions between the negatively charged ADH (isoelectric point of ADH pI~6.8) and positively charged PLL film. The prepared ADH/PLL/CACNT composite film exhibits excellent electrocatalytic reponse towards 2.5 x 10-2 to 3.01 M ethanol. The proposed ADH/PLL/CACNT composite film was also successfully employed for the determination of ethanol from commercially available wine samples which shows the good practical applicability of this method Part III:We report a novel amperometric H2O2 sensor based on catalase (CAT) immobilized at carminic acid functionalized multiwalled carbon nanotubes (CACNT) modified glassy carbon electrode. We successfully prepared a stable dispersion of MWCNTs in carminic acid aqueous solution which was extremely stable even after one month storage at room temperature. The prepared CACNT suspension was characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM) studies. The SEM and AFM results reveal that the prepared CACNT is well dispersed in CA aqueous solution. Further, SEM and AFM images of CANT/CAT composite film shows that CAT has been well immobilized at CACNT. UV–vis absorption spectroscopy results corroborate that the immobilized CAT retains its native structure and remains highly stable at CACNT matrix. Amperometric i-t curve results show that the composite film exhibits excellent electrocatalytic response to H2O2 in the linear concentration range from 1×10-5 M to 5.77×10-3 M. Furthermore, the composite film is highly selective towards H2O2 even in the presence of 0.1 mM of ascorbic acid, dopamine and uric acid. The composite film also successfully detects H2O2 from commercially available wash stain remover solution which shows its good practical applicability.
Частини книг з теми "Nano modified composite"
Abliz, Dilmurat, and Gerhard Ziegmann. "Permeability Characterization and Impregnation Strategies with Nanoparticle-Modified Resin Systems." In Acting Principles of Nano-Scaled Matrix Additives for Composite Structures, 351–64. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68523-2_15.
Повний текст джерелаKhomenko, Anton, Ermias G. Koricho, and Mahmoodul Haq. "Curing Induced Shrinkage: Measurement and Effect of Micro-/Nano-Modified Resins on Tensile Strengths." In Composite, Hybrid, and Multifunctional Materials, Volume 4, 157–63. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06992-0_20.
Повний текст джерелаJin, Wen Jie, Taek Rae Kim, Seung Hwan Moon, Yun Soo Lim, and Myung Soo Kim. "Graphite/Carbon Nanofiber Composite Anode Modified with Nano Size Metal Particles for Lithium Ion Battery." In Materials Science Forum, 1078–81. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-995-4.1078.
Повний текст джерелаIrez, A. B., and E. Bayraktar. "Design of a Low-Cost Aircraft Structural Material Based on Epoxy: Recycled Rubber Composites Modified with Multifunctional Nano Particles." In Mechanics of Composite and Multi-functional Materials, Volume 5, 73–80. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30028-9_11.
Повний текст джерелаArowojolu, Olaniyi, Ahmed Ibrahim, and Mahmoud Reda Taha. "Parametric Study on the Performance of UHPC and Nano-modified Polymer Concrete (NMPC) Composite Wall Panels for Protective Structures." In International Congress on Polymers in Concrete (ICPIC 2018), 683–88. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-78175-4_87.
Повний текст джерелаDeng, Shi Qiang, P. Rosso, Lin Ye, and Klaus Friedrich. "Interlaminar Fracture of CF/EP Composites Modified with Nano-Silica." In Solid State Phenomena, 1403–6. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/3-908451-30-2.1403.
Повний текст джерелаAjeesh, G., P. Sanjana, M. Raji Sivani, S. Govardhan, A. Sudhin, and Philip Goerge. "Development of Fire Resistant Polymeric Nano Composites Using Plasma Modified Calcium Silicate." In Advanced Manufacturing and Materials Science, 449–56. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76276-0_46.
Повний текст джерелаSankaralingam, Pugalanthipandian, Poornimadevi Sakthivel, and Vijayakumar Chinnaswamy Thangavel. "Novel Composites for Bone Tissue Engineering." In Biomimetics - Bridging the Gap [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.106255.
Повний текст джерелаKapustin, Dmitry, Anna Prostyakova, Yana Bryk, Elena Yagudaeva, and Vitaly Zubov. "New Composite Materials Modified with Nano-Layers of Functionalized Polymers for Bioanalysis and Medical Diagnostics." In Nanocomposites and Polymers with Analytical Methods. InTech, 2011. http://dx.doi.org/10.5772/18081.
Повний текст джерелаLakhane, Madhuri, and Megha Mahabole. "Biocompatible Composites and Applications." In Bio-Inspired Nanotechnology, 16–40. BENTHAM SCIENCE PUBLISHERS, 2023. http://dx.doi.org/10.2174/9789815080179123010004.
Повний текст джерелаТези доповідей конференцій з теми "Nano modified composite"
Dang, Vivian T., Russ Maguire, and Robab Safa-Bakhsh. "An Approach to Enhancement of Conductivity in Composite Material Using Nanotechnology." In CANEUS 2006: MNT for Aerospace Applications. ASMEDC, 2006. http://dx.doi.org/10.1115/caneus2006-11060.
Повний текст джерелаAhuja, Suresh K. "Visco-Elastic Modulus and Intercalation of Polymer Chains in Epoxy Nano-Composites." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42503.
Повний текст джерелаJohn, Mathew, Raghu V. Prakash, and Raman Velmurugan. "The Inter-Laminar Fracture and Mechanical Behavior of Nano-Alumina Modified Glass Fiber/ Epoxy Composite." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-87791.
Повний текст джерелаKoricho, Ermias G., Oleksii Karpenko, Anton Khomenko, Mahmoodul Haq, Gary L. Cloud, and Lalita Udpa. "Evaluation of progressive damage of nano-modified composite laminates under repeated impacts." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Nakhiah C. Goulbourne. SPIE, 2016. http://dx.doi.org/10.1117/12.2219410.
Повний текст джерелаGao, Xuekai, Chunyu Liang, Weidong Jin, Liuxin Wang, and Xin Xu. "Preparation and Properties of Composite Nano TiO 2 /CaCO 3 Modified Asphalt." In 20th COTA International Conference of Transportation Professionals. Reston, VA: American Society of Civil Engineers, 2020. http://dx.doi.org/10.1061/9780784483053.144.
Повний текст джерелаHui, Yun, Chao Bian, Jianhua Tong, and Shanhong Xia. "Novel PEDOT-ionic liquid composite films modified Au microelectrodes for nitrite oxidation." In 2017 IEEE 12th International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE, 2017. http://dx.doi.org/10.1109/nems.2017.8017101.
Повний текст джерелаShih, Ching-Jui, Wei-Chih Lin, Chao-Sung Lin, and Yung-Ning Pan. "Surface-modified diamond embedded in nickel matrix composite for intrinsic polishing application." In 2012 7th IEEE International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE, 2012. http://dx.doi.org/10.1109/nems.2012.6196867.
Повний текст джерелаGhazizadeh, Mahdi, Joseph E. Estevez, Evan T. Kimbro, and Ajit D. Kelkar. "Effect of Boron Nitride Nanoparticles on the Mechanical Properties of Carbon Fiber Reinforced Polymeric Composites." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-38342.
Повний текст джерелаSun, Yuqiong, and Peng Yan. "Modified ADRC with composite nonlinear feedback for a piezoelectric-actuator driven nano-manipulating stage." In 2016 35th Chinese Control Conference (CCC). IEEE, 2016. http://dx.doi.org/10.1109/chicc.2016.7554288.
Повний текст джерелаSmyrek, P., Y. Zheng, H. J. Seifert, W. Pfleging, P. Smyrek, and W. Pfleging. "Laser-induced breakdown spectroscopy as a powerful tool for characterization of laser modified composite materials." In 2016 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2016. http://dx.doi.org/10.1109/3m-nano.2016.7824954.
Повний текст джерелаЗвіти організацій з теми "Nano modified composite"
Ruth, Patrick, Brent Viers, Rusty Blanski, and Andre Lee. Effects on Processing by Drop-In Modifiers in Nano-Composite Polymers. Fort Belvoir, VA: Defense Technical Information Center, September 2002. http://dx.doi.org/10.21236/ada406880.
Повний текст джерелаRuth, Patrick, Brent Viers, Rusty Blanski, and Andre Lee. Effects on Processing by Drop-In Modifiers in Nano-Composite Polymers. Fort Belvoir, VA: Defense Technical Information Center, February 2002. http://dx.doi.org/10.21236/ada410033.
Повний текст джерелаKessler, Michael R., and Prashanth Badrinarayanan. Cyanate Ester Resin Modified with Nano-particles for Inclusion in Continuous Fiber Reinforced Composites. Fort Belvoir, VA: Defense Technical Information Center, February 2011. http://dx.doi.org/10.21236/ada562120.
Повний текст джерелаHuang, Cihang, Yen-Fang Su, and Na Lu. Self-Healing Cementitious Composites (SHCC) with Ultrahigh Ductility for Pavement and Bridge Construction. Purdue University, 2021. http://dx.doi.org/10.5703/1288284317403.
Повний текст джерела