Статті в журналах з теми "Multimaterial 3 D printing process"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Multimaterial 3 D printing process".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Giddens, Henry, and Yang Hao. "Multibeam Graded Dielectric Lens Antenna From Multimaterial 3-D Printing." IEEE Transactions on Antennas and Propagation 68, no. 9 (September 2020): 6832–37. http://dx.doi.org/10.1109/tap.2020.2978949.
Повний текст джерелаKonarova, Muxina, Waqas Aslam, Lei Ge, Qing Ma, Fengqiu Tang, Victor Rudolph, and Jorge Norberto Beltramini. "Enabling Process Intensification by 3 D Printing of Catalytic Structures." ChemCatChem 9, no. 21 (September 25, 2017): 4132–38. http://dx.doi.org/10.1002/cctc.201700829.
Повний текст джерелаHogade, Prof Hemant. "Investment Casting Using FDM 3-D Printing." International Journal for Research in Applied Science and Engineering Technology 10, no. 7 (July 31, 2022): 4216–20. http://dx.doi.org/10.22214/ijraset.2022.45967.
Повний текст джерелаMerkle, Thomas, Reiner Gotzen, Joo-Young Choi, and Stefan Koch. "Polymer Multichip Module Process Using 3-D Printing Technologies for D-Band Applications." IEEE Transactions on Microwave Theory and Techniques 63, no. 2 (February 2015): 481–93. http://dx.doi.org/10.1109/tmtt.2014.2387823.
Повний текст джерелаGarg, A., Jasmine Siu Lee Lam, and M. M. Savalani. "Laser power based surface characteristics models for 3-D printing process." Journal of Intelligent Manufacturing 29, no. 6 (November 28, 2015): 1191–202. http://dx.doi.org/10.1007/s10845-015-1167-9.
Повний текст джерелаHaidar, Nataliia, Ganna Zavolodko, and Pavlo Pustovoitov. "PROCESS OF 3D PRINTING IN ONLINE EDUCATION." Advanced Information Systems 6, no. 1 (April 6, 2022): 114–17. http://dx.doi.org/10.20998/2522-9052.2022.1.18.
Повний текст джерелаGräbner, Daniel, Simon Dödtmann, Gerrit Dumstorff, and Frieder Lucklum. "3-D-printed smart screw: functionalization during additive fabrication." Journal of Sensors and Sensor Systems 7, no. 1 (March 20, 2018): 143–51. http://dx.doi.org/10.5194/jsss-7-143-2018.
Повний текст джерелаGarg, A., and Jasmine Siu Lee Lam. "Measurement of environmental aspect of 3-D printing process using soft computing methods." Measurement 75 (November 2015): 210–17. http://dx.doi.org/10.1016/j.measurement.2015.04.016.
Повний текст джерелаzhao, Che, Luquan Ren, Zhengyi Song, Linhong Deng, and Qingping Liu. "Structure-driven biomimetic self-morphing composites fabricated by multi-process 3-D printing." Composites Part A: Applied Science and Manufacturing 123 (August 2019): 1–9. http://dx.doi.org/10.1016/j.compositesa.2019.04.030.
Повний текст джерелаNilsiam, Yuenyong, Paul Sanders, and Joshua M. Pearce. "Slicer and process improvements for open-source GMAW-based metal 3-D printing." Additive Manufacturing 18 (December 2017): 110–20. http://dx.doi.org/10.1016/j.addma.2017.10.007.
Повний текст джерелаCheng, Yih-Lin, Chih-Hsuan Chang, and Chunliang Kuo. "Experimental study on leveling mechanism for material-jetting-type color 3D printing." Rapid Prototyping Journal 26, no. 1 (January 6, 2020): 11–20. http://dx.doi.org/10.1108/rpj-09-2018-0227.
Повний текст джерелаİpekçi, Ahmet, and Bülent Ekici. "Experimental and statistical analysis of robotic 3D printing process parameters for continuous fiber reinforced composites." Journal of Composite Materials 55, no. 19 (February 23, 2021): 2645–55. http://dx.doi.org/10.1177/0021998321996425.
Повний текст джерелаYamamoto, Brennan E., A. Zachary Trimble, Brenden Minei, and Mehrdad N. Ghasemi Nejhad. "Development of multifunctional nanocomposites with 3-D printing additive manufacturing and low graphene loading." Journal of Thermoplastic Composite Materials 32, no. 3 (April 3, 2018): 383–408. http://dx.doi.org/10.1177/0892705718759390.
Повний текст джерелаTino, Rance, Adam Yeo, Martin Leary, Milan Brandt, and Tomas Kron. "A Systematic Review on 3D-Printed Imaging and Dosimetry Phantoms in Radiation Therapy." Technology in Cancer Research & Treatment 18 (January 1, 2019): 153303381987020. http://dx.doi.org/10.1177/1533033819870208.
Повний текст джерелаBroughton, Kimberly K., Bonnie Y. Chien, Derek S. Stenquist, Caroline Williams, Christopher P. Miller, and John Y. Kwon. "3-D Generated Anatomic Custom Talar Cement Spacers: A Technical Tip and Literature Review." Foot & Ankle Orthopaedics 7, no. 1 (January 2022): 2473011421S0012. http://dx.doi.org/10.1177/2473011421s00120.
Повний текст джерелаZhao, Chenfei, Jun Wang, and Lini Lu. "Preparation and application of water-based nano-silver conductive ink in paper-based 3D printing." Rapid Prototyping Journal 28, no. 4 (November 1, 2021): 747–55. http://dx.doi.org/10.1108/rpj-05-2020-0112.
Повний текст джерелаRenn, Michael J., Bruce H. King, Michael O'Reilly, Jeff S. Leal, and Suzette K. Pangrle. "Aerosol Jet® Printing of High Density, 3-D Interconnects for Multi-Chip Packaging." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2010, DPC (January 1, 2010): 002131–52. http://dx.doi.org/10.4071/2010dpc-tha15.
Повний текст джерелаShen, Hongyao, Wangzhe Du, Weijun Sun, Yuetong Xu, and Jianzhong Fu. "Visual Detection of Surface Defects Based on Self-Feature Comparison in Robot 3-D Printing." Applied Sciences 10, no. 1 (December 27, 2019): 235. http://dx.doi.org/10.3390/app10010235.
Повний текст джерелаHan, Lei, Gang Wang, Lin Zhang, Weixu Jiang, Pengbing Zhao, Wei Tang, Tao Dang, and Hongxing Zheng. "Tightly Coupled Ultra-Wideband Phased-Array Implemented by Three-Dimensional Inkjet Printing Technique." Electronics 11, no. 20 (October 14, 2022): 3320. http://dx.doi.org/10.3390/electronics11203320.
Повний текст джерелаTalyosef, Orly. "Perspectives on BIM-Based 3D Printing for Sustainable Buildings." Architext 9 (2021): 36–52. http://dx.doi.org/10.26351/architext/9/3.
Повний текст джерелаMagare, Nayan, and M. S. Harne. "Parametric Investigation of FDM Process Parameter on Impact Strength of 3D-Printed Part." International Journal for Research in Applied Science and Engineering Technology 10, no. 11 (November 30, 2022): 1946–51. http://dx.doi.org/10.22214/ijraset.2022.47741.
Повний текст джерелаIdris Shuhada and Desmira Desmira. "KECEPATAN PROSES CETAK MOTOR DC MESIN OUTDOOR TERHADAP KEPUASAN KONSUMEN PADA PT. SEMBURAT LENTERA SEMESTA." Jurnal Universal Technic 1, no. 2 (September 7, 2022): 01–13. http://dx.doi.org/10.58192/unitech.v1i2.42.
Повний текст джерелаWoern, Aubrey, and Joshua Pearce. "3-D Printable Polymer Pelletizer Chopper for Fused Granular Fabrication-Based Additive Manufacturing." Inventions 3, no. 4 (November 27, 2018): 78. http://dx.doi.org/10.3390/inventions3040078.
Повний текст джерелаKhona, Nilesh Bharat. "Design and Fabrication of Arduino Based Flexible Manufacturing Process on the Desk: 3D Printing." International Journal for Research in Applied Science and Engineering Technology 10, no. 6 (June 30, 2022): 2603–10. http://dx.doi.org/10.22214/ijraset.2022.44427.
Повний текст джерелаThakkar, Rishi, Amit Raviraj Pillai, Jiaxiang Zhang, Yu Zhang, Vineet Kulkarni, and Mohammed Maniruzzaman. "Novel On-Demand 3-Dimensional (3-D) Printed Tablets Using Fill Density as an Effective Release-Controlling Tool." Polymers 12, no. 9 (August 20, 2020): 1872. http://dx.doi.org/10.3390/polym12091872.
Повний текст джерелаZichner, R., and R. R. Baumann. "3-D transponder antennas for future SHF RFID applications." Advances in Radio Science 9 (December 8, 2011): 401–5. http://dx.doi.org/10.5194/ars-9-401-2011.
Повний текст джерелаChambers, James A., Kenneth P. Seastedt, and Jocelyn Raymundo-Grinstead. "An Example of 3-D Printing for Expeditionary Medicine: The Air Force Retractor." Military Medicine 185, no. 5-6 (April 11, 2020): e565-e567. http://dx.doi.org/10.1093/milmed/usz449.
Повний текст джерелаChen, Yi Ping, and Ming Der Yang. "Micro-Scale Manufacture of 3D Printing." Applied Mechanics and Materials 670-671 (October 2014): 936–41. http://dx.doi.org/10.4028/www.scientific.net/amm.670-671.936.
Повний текст джерелаMeister, Frederic, Jochen Mück, Andrea Hohmann, and Christian Seidel. "Automatisiertes Nesting in additiven Prozessketten/Production planning and control for additive series production – Automated Nesting in additive process chains." wt Werkstattstechnik online 112, no. 04 (2022): 248–52. http://dx.doi.org/10.37544/1436-4980-2022-04-48.
Повний текст джерелаPakvasa, Mikhail, Hannes Prescher, Bryce Hendren-Santiago, Tony Da Lomba, Nicholas McKenzie, Courtney Orsbon, Zachary Collier, Richard Ramirez-Garcia, Isabella Gomez, and Russell R. Reid. "An Easy-to-Use Protocol for Segmenting and 3-D Printing Craniofacial CT-Images Using Open-Source Software." FACE 3, no. 1 (January 10, 2022): 66–73. http://dx.doi.org/10.1177/27325016211072286.
Повний текст джерелаSebastian, Tutu, Miriam Bach, Andreas Geiger, Tony Lusiola, Lucjan Kozielski, and Frank Clemens. "Investigation of Electromechanical Properties on 3-D Printed Piezoelectric Composite Scaffold Structures." Materials 14, no. 20 (October 9, 2021): 5927. http://dx.doi.org/10.3390/ma14205927.
Повний текст джерелаCollins, P. C., C. V. Haden, I. Ghamarian, B. J. Hayes, T. Ales, G. Penso, V. Dixit, and G. Harlow. "Progress Toward an Integration of Process–Structure–Property–Performance Models for “Three-Dimensional (3-D) Printing” of Titanium Alloys." JOM 66, no. 7 (June 3, 2014): 1299–309. http://dx.doi.org/10.1007/s11837-014-1007-y.
Повний текст джерелаDombrowski, F., P. W. Garcia Caso, M. W. Laschke, M. Klein, J. Günster, and Georg Berger. "3-D Printed Bioactive Bone Replacement Scaffolds of Alkaline Substituted Ortho-Phosphates Containing Meta- and Di-Phosphates." Key Engineering Materials 529-530 (November 2012): 138–42. http://dx.doi.org/10.4028/www.scientific.net/kem.529-530.138.
Повний текст джерелаRoesch, Michael, Carolin Roesch, and Daniel J. Cziczo. "Dry particle generation with a 3-D printed fluidized bed generator." Atmospheric Measurement Techniques 10, no. 6 (June 2, 2017): 1999–2007. http://dx.doi.org/10.5194/amt-10-1999-2017.
Повний текст джерелаWarsi, Musarrat H., Mohammad Yusuf, Majed Al Robaian, Maria Khan, Abdul Muheem, and Saba Khan. "3D Printing Methods for Pharmaceutical Manufacturing: Opportunity and Challenges." Current Pharmaceutical Design 24, no. 42 (March 20, 2019): 4949–56. http://dx.doi.org/10.2174/1381612825666181206121701.
Повний текст джерелаYang, Xue Ling, Di Wang, and Dong Man Yu. "Development and Application of Four Typical Rapid Prototyping Technologies." Applied Mechanics and Materials 160 (March 2012): 165–69. http://dx.doi.org/10.4028/www.scientific.net/amm.160.165.
Повний текст джерелаBeev, Aues A., S. Yu Khashirova, and D. A. Beeva. "Aromatic Polyester Ketones and Methods of their Microcapsulation." Materials Science Forum 935 (October 2018): 70–74. http://dx.doi.org/10.4028/www.scientific.net/msf.935.70.
Повний текст джерелаCao, Ying Yu, Hui Qi Gong, and Peng Gao. "Modal Analysis Based on UG and ANSYS for Wide-Format Inkjet Printing Machine." Advanced Materials Research 988 (July 2014): 319–23. http://dx.doi.org/10.4028/www.scientific.net/amr.988.319.
Повний текст джерелаAdzhamskiy, S. V., G. А. Kononenko, and R. V. Podolskyi. "Influence of SLM-process parameters on the formation of the boundaries of parts of heat-resistant nickel alloy Inconel 718." Kosmìčna nauka ì tehnologìâ 27, no. 6 (2021): 105–14. http://dx.doi.org/10.15407/knit2021.06.105.
Повний текст джерелаNissi Kumar, N., P. Sai Tharun, K. Prakash, L. M. N. Mythresh, and Naga Jyoshna. "Robot ARM with Gesture Control." Journal of Physics: Conference Series 2325, no. 1 (August 1, 2022): 012012. http://dx.doi.org/10.1088/1742-6596/2325/1/012012.
Повний текст джерелаSethi, Shreya, Rajat Tumane, and Anupama Panghal. "3D PRINTING IN FOOD PROCESSING INDUSTRIES -A PATHWAY TO INNOVATIONS." Journal of Global Economy 14, no. 4 (November 8, 2018): 61–70. http://dx.doi.org/10.1956/jge.v14i4.498.
Повний текст джерелаCaminero, Miguel Ángel, Ana Romero, Jesús Miguel Chacón, Pedro José Núñez, Eustaquio García-Plaza, and Gloria Patricia Rodríguez. "Additive manufacturing of 316L stainless-steel structures using fused filament fabrication technology: mechanical and geometric properties." Rapid Prototyping Journal 27, no. 3 (January 27, 2021): 583–91. http://dx.doi.org/10.1108/rpj-06-2020-0120.
Повний текст джерелаLiu, Mengjing, Sun-Wai Chiang, Xiaodong Chu, Jia Li, Lin Gan, Yanbing He, Baohua Li, Feiyu Kang, and Hongda Du. "Polymer composites with enhanced thermal conductivity via oriented boron nitride and alumina hybrid fillers assisted by 3-D printing." Ceramics International 46, no. 13 (September 2020): 20810–18. http://dx.doi.org/10.1016/j.ceramint.2020.05.096.
Повний текст джерелаShang, Jianzhong, Xin Li, Zhuo Wang, Rong Wang, and Hong Zhu. "Rheological and printable behavior of resin – class materials for 3D printing applications." Rapid Prototyping Journal 25, no. 5 (June 10, 2019): 801–8. http://dx.doi.org/10.1108/rpj-11-2016-0183.
Повний текст джерелаShen, Hongyao, Xiaoxiang Ye, Guanhua Xu, Linchu Zhang, Jun Qian, and Jianzhong Fu. "3D printing build orientation optimization for flexible support platform." Rapid Prototyping Journal 26, no. 1 (January 6, 2020): 59–72. http://dx.doi.org/10.1108/rpj-09-2018-0252.
Повний текст джерелаDumamika, Tione Afifaya, and Mochammad Sigit Ramadhan. "PENGAPLIKASIAN TEKNIK BLOCK PRINTING DENGAN MATERIAL KAYU BEKAS KEBAKARAN HUTAN KALIMANTAN BARAT PADA PAKAIAN READY TO WEAR." Gorga : Jurnal Seni Rupa 10, no. 2 (November 3, 2021): 277. http://dx.doi.org/10.24114/gr.v10i2.27154.
Повний текст джерелаNovak, James I., and Jonathon O’Neill. "A design for additive manufacturing case study: fingerprint stool on a BigRep ONE." Rapid Prototyping Journal 25, no. 6 (July 8, 2019): 1069–79. http://dx.doi.org/10.1108/rpj-10-2018-0278.
Повний текст джерелаJiang, Shenglong, Guangxin Liao, Dingding Xu, Fenghua Liu, Wen Li, Yuchuan Cheng, Zhixiang Li, and Gaojie Xu. "Mechanical properties analysis of polyetherimide parts fabricated by fused deposition modeling." High Performance Polymers 31, no. 1 (January 16, 2018): 97–106. http://dx.doi.org/10.1177/0954008317752822.
Повний текст джерелаKrólewski, Krzysztof, Aleksandra Wieloszyńska, Aleksandra Maria Kamińska, and Katarzyna Kardacz. "Optical properties of daylight curable resin doped with nanodiamond powder." Photonics Letters of Poland 11, no. 3 (September 30, 2019): 84. http://dx.doi.org/10.4302/plp.v11i3.930.
Повний текст джерелаRamadhan, Mochammad Sigit, Kikit Nur Yulianti, and Dede Ananta. "INOVASI PRODUK FASHION DENGAN MENERAPKAN KARAKTER VISUAL CHIAROSCURO MENGGUNAKAN TEKNIK CETAK TINGGI CUKIL KAYU BLOCK PRINTING." Gorga : Jurnal Seni Rupa 11, no. 1 (June 30, 2022): 192. http://dx.doi.org/10.24114/gr.v11i1.33052.
Повний текст джерела