Добірка наукової літератури з теми "Multiaxial deformation"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Multiaxial deformation".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Multiaxial deformation"
Yaguchi, Masatsugu, Masato Yamamoto, Takashi Ogata, and Nobutada Ohno. "An Anisotropic Constitutive Model for a Directionally Solidified Superalloy." Key Engineering Materials 340-341 (June 2007): 901–6. http://dx.doi.org/10.4028/www.scientific.net/kem.340-341.901.
Повний текст джерелаYang, Xianjie, Yan Luo, and Qing Gao. "Constitutive Modeling on Time-Dependent Deformation Behavior of 96.5Sn-3.5Ag Solder Alloy Under Cyclic Multiaxial Straining." Journal of Electronic Packaging 129, no. 1 (May 18, 2006): 41–47. http://dx.doi.org/10.1115/1.2429708.
Повний текст джерелаTermonia, Yves. "Multiaxial deformation of polymer networks." Macromolecules 24, no. 5 (September 1991): 1128–33. http://dx.doi.org/10.1021/ma00005a024.
Повний текст джерелаLi, Jiejie, Jie Li, Yangheng Chen, and Jian Chen. "Strengthening Modulus and Softening Strength of Nanoporous Gold in Multiaxial Tension: Insights from Molecular Dynamics." Nanomaterials 12, no. 24 (December 8, 2022): 4381. http://dx.doi.org/10.3390/nano12244381.
Повний текст джерелаKwapisz, Marcin, Marcin Knapiński, Henryk Dyja, and Konrad Błażej Laber. "Numerical Analysis in the Process of Alternate Pressing and Multiaxial Compression." Materials Science Forum 706-709 (January 2012): 1763–68. http://dx.doi.org/10.4028/www.scientific.net/msf.706-709.1763.
Повний текст джерелаKubo, Atsushi, and Yoshitaka Umeno. "Coarse-Grained Molecular Dynamics Simulation of Fracture Problems in Polycarbonate." Solid State Phenomena 258 (December 2016): 73–76. http://dx.doi.org/10.4028/www.scientific.net/ssp.258.73.
Повний текст джерелаLu, Fucong, Kun Zhang, Yuhang Hou, and Zhiwen Wu. "Investigation on Temperature-Dependent Multiaxial Ratchetting of Polycarbonate by a Novel Experimental Method." Advances in Materials Science and Engineering 2022 (May 13, 2022): 1–9. http://dx.doi.org/10.1155/2022/6577569.
Повний текст джерелаCazac, Alin Marian, Costică Bejinariu, Constantin Baciu, Stefan Lucian Toma, and Costel Dorel Florea. "Experimental Determination of Force and Deformation Stress in Nanostructuring Aluminum by Multiaxial Forging Method." Applied Mechanics and Materials 657 (October 2014): 137–41. http://dx.doi.org/10.4028/www.scientific.net/amm.657.137.
Повний текст джерелаKang, Guo Zheng, and Yu Jie Liu. "Uniaxial and Multiaxial Cyclic Deformation Behaviors of SiCp/6061Al Alloy Composites." Key Engineering Materials 353-358 (September 2007): 1247–50. http://dx.doi.org/10.4028/www.scientific.net/kem.353-358.1247.
Повний текст джерелаKaruskevych, M., T. Maslak, and L. Pejkowski. "Surface deformation relief features under multiaxial fatigue." Scientific journal of the Ternopil national technical university 96, no. 4 (2019): 45–50. http://dx.doi.org/10.33108/visnyk_tntu2019.04.045.
Повний текст джерелаДисертації з теми "Multiaxial deformation"
Tomlinson, Philip S. "Multiaxial deformation of AZ80 magnesium alloy." Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45362.
Повний текст джерелаHallett, Joseph F. "Multiaxial strength and fatigue of rubber compounds." Thesis, Loughborough University, 1997. https://dspace.lboro.ac.uk/2134/6759.
Повний текст джерелаShamsaei, Nima. "Multiaxial Fatigue and Deformation Including Non-proportional Hardening and Variable Amplitude Loading Effects." University of Toledo / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1279760342.
Повний текст джерелаWright, Lawrence William. "Creep deformation of CMSX-4 NBSCS during uniaxial and multiaxial loading at high temperature." Thesis, University of Cambridge, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.619709.
Повний текст джерелаSaadedine, Mahrez. "Micromécanique et macromécanique des matériaux souples renforcés par des nanoparticules inorganiques." Electronic Thesis or Diss., Université de Lille (2022-....), 2022. http://www.theses.fr/2022ULILN045.
Повний текст джерелаNanomaterials are currently widely used in bio-applications and play a crucial role in modern strategies to remedy malfunctions of natural soft tissues such as tendons, ligaments and intervertebral discs. Besides, progress in biomechanics is closely related to the elaboration of new biomaterials tailored to suit certain specifications. The combination of nanotechnology with other fields of science has attracted increasing attention during the past decades to get improved biomaterials. Soft materials reinforced by inorganic nanoparticles are an example of such a combination between nanotechnology and biomaterial science. These biomaterials can mimic the chemical, mechanical, electrical, and biological properties of native tissues. The present PhD dissertation addresses the problem of the multiscale constitutive representation of the multiaxial inelastic behavior of soft materials reinforced by inorganic nanoparticles. The main achievement of this PhD concerns the development of a fully three-dimensional model within a micromechanical treatment to analyze the failure, the self-healing facility and the nanofiller reinforcement mechanisms considering the environmental effects. The material system is representatively regarded as a cubic unit cell containing nine nanoparticles; a central nanoparticle connects eight nanoparticles placed at the cube vertices via a number of polymer chains to account for the effective role of nanoparticles on the nonlinear and finite-strain macro-behavior. The near-field direct interactions between the nanoparticles and the chains network are physically described using a micro-macro scale transition within the Eshelby inclusion theory. The model explicitly considers the chains network with dynamic reversible detachable/re-attachable mechanisms of bonds to coherently capture the rate-dependent extreme stretchability and some inelastic features including strong hysteresis upon stretching-retraction and continuous relaxation. A quantitative evaluation of our model is presented by comparisons to available experimental data of a variety of nanocomposite material systems over a wide range of nanoparticle concentrations for different modes of deformation upon monotonic and cyclic loading sequences. The model is found being able to successfully reproduce the significant features of the multiaxial macro-response. It is finally used to highlight some important insights on the nanoparticle reinforcement mechanisms and their role on the multiaxial dissipation, multiaxial failure and room temperature self-healing facility considering the swelling effects
Kraiem, Omar. "Comportement mécanique d’une mousse fragile. Application aux emballages de transport de matières dangereuses." Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLN028/document.
Повний текст джерелаDue to improvements in the manufacturing process that allow a better control of their microstructure, brittle foams are now part of the new efficient materials. New markets in the field of structural applications open up thanks to their excellent mechanical properties combined with light weight.In this study, a carbon foam with open cells has been studied in order to be used as shock absorber in packagings. Its compressive mechanical behavior has been characterized under various uniaxial and multiaxial loadings. The carbon foam yield surface and its evolution during loading have been identified. The main mechanical properties have been evaluated and some of them have been correlated with those predicted by the Gibson and Ashby micromechanical model. The mechanisms of deformation and the energy absorption have been studied using post-mortem observations by scanning electron microscopy (SEM) and X-Ray microtomography.The Deshpande and Fleck model (DF) has been adopted and slightly modified to model the compressive multiaxial behavior of the carbon foam. The latter is considered as an homogeneous continuum medium. The constitutive equations have been implemented in the finite element code LS-DYNA via a Umat routine. The model parameters have been identified and the model estimations validated on available triaxial tests as well as on crushing tests made on micro-structures. Numerical simulations are relevant on predicting the global macroscopic behavior. Nevertheless, the mechanical model needs to be improved to better account for some phenomena not currently described
Tawana, Siyd S. "Behavior of plain and steel fiber reinforced concrete under multiaxial stress." Ohio : Ohio University, 1995. http://www.ohiolink.edu/etd/view.cgi?ohiou1178903105.
Повний текст джерелаRial, Djihad. "Modélisation tridimensionnelle des flexibles hydroformés et tressés en statique et en fatigue." Electronic Thesis or Diss., Compiègne, 2015. http://www.theses.fr/2015COMP2184.
Повний текст джерелаHydroformed flexible tubes are essential structures used in several industrial sectors such as the automotive sector, the aviation industry or energy production, such as the production of renewable energy in solar thermal energy farms where the panels must both be supplying fluid along and follow the direction of the sun. These structures serve as connecting parts between the rigid parts different mechanisms, primarily used for damping vibrations and acoustic emissions, and, as their name suggests, they also allow flexibility and pressure expansion, which considerably improves the fatigue strength. The mastery and prediction of the mechanical behavior of these structures are very important from a safety point of view and an economic point of view. Indeed, their accidental breakage can cause very serious consequences due to their use in sensitive areas such as the nuclear industry. In this context, this thesis was launched between Compiegne University of Technology and industrial BOA-group to create digital approaches to behavioral predictions and estimating the life braided hoses that take into account extreme conditions (temperature and pressure) and the forming parameters and properties of the materials used. In terms of use, these products are subject to thermomechanical charge-discharge cycles and vibrations can induce complex deformed piping of wear due to friction and damage by fatigue, The purpose of the study is to develop a numerical approach validated by the experience to certify products and improve the design. This approach will allow to estimate the lifetime of braided wavy taking into account: - the initial state of the product after forming and assembly, - thermomechanical stresses, is defined by the specification, or encountered in specific use cases, - vibrations encountered during use in real cases. The expected results are the life of the products from a calculation model of their behavior using the characteristics of the materials and interaction braid / tube
江武駿. "Endochronic Theory For Rate-Depenent Elasto-Plastic Deformation Under Multiaxial Loading." Thesis, 1997. http://ndltd.ncl.edu.tw/handle/41732710939164325016.
Повний текст джерелаLi, Dan. "Mathematical models of an elastomeric material for non-uniform and multiaxial deformation conditions." Thesis, 2005. http://hdl.handle.net/2429/16297.
Повний текст джерелаApplied Science, Faculty of
Materials Engineering, Department of
Graduate
Книги з теми "Multiaxial deformation"
Kalluri, S., and PJ Bonacuse, eds. Multiaxial Fatigue and Deformation Testing Techniques. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 1997. http://dx.doi.org/10.1520/stp1280-eb.
Повний текст джерелаSreeramesh, Kalluri, and Bonacuse Peter J. 1960-, eds. Multiaxial fatigue and deformation testing techniques. W. Conshohocken, Penn: ASTM, 1997.
Знайти повний текст джерелаKalluri, S., and PJ Bonacuse, eds. Multiaxial Fatigue and Deformation: Testing and Prediction. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2000. http://dx.doi.org/10.1520/stp1387-eb.
Повний текст джерелаSreeramesh, Kalluri, Bonacuse Peter J. 1960-, and Symposium on Multiaxial Fatigue and Deformation: Testing and Prediction (1999 : Seattle, Wash.), eds. Multiaxial fatigue and deformation: Testing and prediction. W. Conshohocken, PA: ASTM, 2000.
Знайти повний текст джерелаEberhardshtayner, Yozef, Sergey Leonovich, and Valentin Dorkin. Design models of structural building materials under multiaxial stress. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1082947.
Повний текст джерелаWash.) Symposium on Multiaxial Fatigue and Deformation: Testing and Prediction (1999 : Seattle. Multiaxial Fatigue and Deformation: Testing and Prediction (A S T M Special Technical Publication.//Stp, 1387) (Astm Special Technical Publication// Stp). Astm International, 2000.
Знайти повний текст джерелаManson, S. S., and G. R. Halford. Fatigue and Durability of Metals at High Temperatures. ASM International, 2009. http://dx.doi.org/10.31399/asm.tb.fdmht.9781627083430.
Повний текст джерелаЧастини книг з теми "Multiaxial deformation"
Murakami, S., Y. Kanagawa, T. Ishida, and E. Tsushima. "Inelastic Deformation and Fatigue Damage of Composite under Multiaxial Loading." In Inelastic Deformation of Composite Materials, 675–94. New York, NY: Springer New York, 1991. http://dx.doi.org/10.1007/978-1-4613-9109-8_33.
Повний текст джерелаWebster, G. A. "Determination of Multiaxial Stress Creep Deformation and Rupture Criteria." In Harmonisation of Testing Practice for High Temperature Materials, 289–93. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2888-9_14.
Повний текст джерелаWindelband, B., B. Schinke, and D. Munz. "Cyclic Deformation and Crack Initiation in Tubes Under Multiaxial Loading." In Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3, 304–10. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2860-5_50.
Повний текст джерелаKang, Guo Zheng, and Yu Jie Liu. "Uniaxial and Multiaxial Cyclic Deformation Behaviors of SiCp/6061Al Alloy Composites." In Key Engineering Materials, 1247–50. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.1247.
Повний текст джерелаZiebs, Josef, Jürgen Meersmann, Hans-Joachim Kühn, and Siegmar Ledworuski. "High Temperature Inelastic Deformation of in 738 LC Under Uniaxial and Multiaxial Loading." In Low Cycle Fatigue and Elasto-Plastic Behaviour of Materials—3, 248–55. Dordrecht: Springer Netherlands, 1992. http://dx.doi.org/10.1007/978-94-011-2860-5_41.
Повний текст джерелаZeng, Chongyang, and Xiangfan Fang. "Deformation and Failure Behavior of Steel Under High Strain Rate and Multiaxial Loading." In The Minerals, Metals & Materials Series, 445–55. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-06212-4_41.
Повний текст джерелаSweeney, J., and I. M. Ward. "The Application of Hyperelastic and Rate Dependent Models to the Multiaxial Deformation of Polymers." In Solid Mechanics and Its Applications, 115–20. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-015-8494-4_16.
Повний текст джерелаÖzkaya, Nihat, Margareta Nordin, David Goldsheyder, and Dawn Leger. "Multiaxial Deformations and Stress Analyses." In Fundamentals of Biomechanics, 189–219. New York, NY: Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-1150-5_14.
Повний текст джерелаÖzkaya, Nihat, Dawn Leger, David Goldsheyder, and Margareta Nordin. "Multiaxial Deformations and Stress Analyses." In Fundamentals of Biomechanics, 317–60. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-44738-4_14.
Повний текст джерелаÖzkaya, Nihat, and Margareta Nordin. "Multiaxial Deformations and Stress Analyses." In Fundamentals of Biomechanics, 153–94. New York, NY: Springer New York, 1999. http://dx.doi.org/10.1007/978-1-4757-3067-8_8.
Повний текст джерелаТези доповідей конференцій з теми "Multiaxial deformation"
GHAZIMORADI, MEHDI, VALTER CARVELLI, and JOHN MONTESANO. "ASSESSING THE MULTIAXIAL DEFORMATION RESPONSE OF UNIDIRECTIONAL NON-CRIMP FABRICS." In Thirty-sixth Technical Conference. Destech Publications, Inc., 2021. http://dx.doi.org/10.12783/asc36/35914.
Повний текст джерелаKurath, Peter, and Jason Howard Jones. "Multiaxial Thermomechanical Deformation Utilizing a Non-Unified Plasticity Model." In SAE 2000 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-0782.
Повний текст джерелаSun, Xingyue, Ruisi Xing, and Xu Chen. "Multiaxial Ratcheting Deformation of 316LN Stainless Steel at Elevated Temperatures." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21209.
Повний текст джерелаBasoalto, H. C., R. N. Ghosh, M. G. Ardakani, B. A. Shollock, and M. McLean. "Multiaxial Creep Deformation of Single Crystal Superalloys: Modelling and Validation." In Superalloys. TMS, 2000. http://dx.doi.org/10.7449/2000/superalloys_2000_515_524.
Повний текст джерелаGao, Qing, Zhi Shi, Guozheng Kang, and Yujie Liu. "Multiaxial Time-Dependent Cyclic Deformation of Stainless Steel at High Temperatures." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93300.
Повний текст джерелаKhraisheh, Marwan K. "Constitutive Modeling of Multiaxial Deformation and Induced Anisotropy in Superplastic Materials." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1196.
Повний текст джерелаAhmad, Jalees, Golam M. Newaz, and Theodore Nicholas. "Prediction of Metal Matrix Composite Response to Multiaxial Stresses." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0359.
Повний текст джерелаRoos, Eberhard, Xaver Schuler, and Ludwig Stumpfrock. "Numerical Evaluation of Ratchetting Effects on the Deformation and Failure Behaviour of Components." In ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77245.
Повний текст джерелаAhmad, Jalees, and Theodore Nicholas. "Modeling of Inelastic Metal Matrix Composite Response Under Multiaxial Loading." In ASME 1996 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/imece1996-0487.
Повний текст джерелаKontermann, Christian, Alexander Erbe, Fabian Conrad, Karl Michael Kraemer, and Matthias Oechsner. "Deformation and Damage Behavior of a 1 Cr-Cast Steel Under Multiaxial Loading at Elevated Temperatures." In ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-82885.
Повний текст джерелаЗвіти організацій з теми "Multiaxial deformation"
Lu, Wei-Yang. Small-Scale Multiaxial Deformation Experiments on Solder for High-Fidelity Model Development. Office of Scientific and Technical Information (OSTI), December 2002. http://dx.doi.org/10.2172/811190.
Повний текст джерелаDing, J. L., K. C. Liu, and C. R. Brinkman. Multiaxial deformation and life prediction model and experimental data for advanced silicon nitride ceramics. Office of Scientific and Technical Information (OSTI), June 1993. http://dx.doi.org/10.2172/10162954.
Повний текст джерелаEarthman, J. C., and F. A. Mohamed. Mechanisms of high temperature deformation and rupture under multiaxial loading conditions. Final progress report, July 1, 1996--June 30, 1997. Office of Scientific and Technical Information (OSTI), October 1997. http://dx.doi.org/10.2172/639762.
Повний текст джерелаMessner, M. C., and T. L. Sham. Development of a multiaxial deformation measure and creep-fatigue damage summation for multiple load cycle types in support of an improved creep-fatigue design method. Office of Scientific and Technical Information (OSTI), June 2019. http://dx.doi.org/10.2172/1601810.
Повний текст джерела