Добірка наукової літератури з теми "Morphing composites"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Morphing composites".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Morphing composites"
Rivera-Tarazona, L. K., V. D. Bhat, H. Kim, Z. T. Campbell, and T. H. Ware. "Shape-morphing living composites." Science Advances 6, no. 3 (January 2020): eaax8582. http://dx.doi.org/10.1126/sciadv.aax8582.
Повний текст джерелаArrieta, Andres F., Onur Bilgen, Michael I. Friswell, and Peter Hagedorn. "Dynamic control for morphing of bi-stable composites." Journal of Intelligent Material Systems and Structures 24, no. 3 (June 27, 2012): 266–73. http://dx.doi.org/10.1177/1045389x12449918.
Повний текст джерелаChillara, Venkata Siva C., Leon M. Headings, Ryohei Tsuruta, Eiji Itakura, Umesh Gandhi, and Marcelo J. Dapino. "Shape memory alloy–actuated prestressed composites with application to morphing automotive fender skirts." Journal of Intelligent Material Systems and Structures 30, no. 3 (November 23, 2018): 479–94. http://dx.doi.org/10.1177/1045389x18812702.
Повний текст джерелаKwon, O.-Hyun, and Jin-Ho Roh. "Origami-inspired shape memory dual-matrix composite structures." Journal of Intelligent Material Systems and Structures 30, no. 17 (September 18, 2019): 2639–47. http://dx.doi.org/10.1177/1045389x19873429.
Повний текст джерелаElsheikh, Ammar. "Bistable Morphing Composites for Energy-Harvesting Applications." Polymers 14, no. 9 (May 5, 2022): 1893. http://dx.doi.org/10.3390/polym14091893.
Повний текст джерелаNguyen, Vinh Quang, Anansa S. Ahmed, and Raju V. Ramanujan. "Morphing Soft Magnetic Composites." Advanced Materials 24, no. 30 (July 3, 2012): 4041–54. http://dx.doi.org/10.1002/adma.201104994.
Повний текст джерелаBishay, Peter L., and Christian Aguilar. "Parametric Study of a Composite Skin for a Twist-Morphing Wing." Aerospace 8, no. 9 (September 13, 2021): 259. http://dx.doi.org/10.3390/aerospace8090259.
Повний текст джерелаLi, Ting, Jian Sun, Jinsong Leng, and Yanju Liu. "An electrical heating shape memory polymer composite incorporated with conductive elastic fabric." Journal of Composite Materials 56, no. 11 (March 27, 2022): 1725–36. http://dx.doi.org/10.1177/00219983221085630.
Повний текст джерелаKarthik, R., S. Guru Prasath, and K. R. Swathi. "Surface Morphing using Macro Fiber Composites." Materials Today: Proceedings 5, no. 5 (2018): 12863–71. http://dx.doi.org/10.1016/j.matpr.2018.02.271.
Повний текст джерелаArrieta, A. F., D. J. Wagg, and S. A. Neild. "Dynamic Snap-through for Morphing of Bi-stable Composite Plates." Journal of Intelligent Material Systems and Structures 22, no. 2 (January 2011): 103–12. http://dx.doi.org/10.1177/1045389x10390248.
Повний текст джерелаДисертації з теми "Morphing composites"
Chillara, Venkata Siva Chaithanya. "Multifunctional Laminated Composites for Morphing Structures." The Ohio State University, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=osu1524104865278235.
Повний текст джерелаRuangjirakit, Kitchanon. "Polyurethane corrugated composites for morphing wing applications." Thesis, Imperial College London, 2014. http://hdl.handle.net/10044/1/18064.
Повний текст джерелаPanesar, Ajit S. "Multistable morphing composites using variable angle tows (VAT)." Thesis, University of Bristol, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.574264.
Повний текст джерелаMulakkal, Manu. "Development of bio-inspired cellulosic smart composites for morphing." Thesis, University of Bristol, 2018. http://hdl.handle.net/1983/6c3e48d3-78f7-4ae3-a50d-2dd7f0f65857.
Повний текст джерелаMattioni, Filippo. "Thermally induced multi-stable composites for morphing aircraft applications." Thesis, University of Bristol, 2009. http://hdl.handle.net/1983/1a808d25-f44d-42b9-8c43-d5664f1d2417.
Повний текст джерелаArrieta-Diaz, Andres Felipe. "Nonlinear Dynamics and Control of Bi-stable Composites for Morphing Applications." Thesis, University of Bristol, 2009. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.521093.
Повний текст джерелаWang, Bing. "Viscoelastically prestressed composites : towards process optimisation and application to morphing structures." Thesis, University of Hull, 2016. http://hydra.hull.ac.uk/resources/hull:15173.
Повний текст джерелаRubenking, Samuel Kim. "Dual Mode Macro Fiber Composite-Actuated Morphing Tip Feathers for Controlling Small Unmanned Aircraft." Thesis, Virginia Tech, 2017. http://hdl.handle.net/10919/78433.
Повний текст джерелаMaster of Science
Chabaud, Guillaume. "3D and 4D printing of high performance continuous synthetic and natural fibre composites for structural and morphing applications." Thesis, Lorient, 2020. http://www.theses.fr/2020LORIS563.
Повний текст джерела3D printing and especially Fused Filament Fabrication (FFF) technology for composite materials reinforced by continuous fibers is an emerging research field which aims to enhance the mechanical performance of 3D printing structures and to widen the field of application (aerospace, sailing…). Another trend, 3D printing allows to develop stimulable materials (sensor and/or actuators) and to consider parts with complex architecture that can be deployed under various stimulation (electricity temperature, pressure…). The present work is therefore part of this context and aims to develop new multi-functional materials elaborated by 4D printing. First, the scientific objective of this work is to better understand the relationship between the process, the induced microstructure, mechanical and the hygromechanical performances in order to target structural applications (aeronautic, sailing) for composite materials reinforced with synthetic fibers (carbon and glass) and natural fibers (flax). The second part of this work aimed to develop hygromorphic composites reinforced with continuous fibers (synthetic and natural) by 4D printing with a bioinspired bilayer architecture inspired by the pinecone scale. The conductive behavior of carbon fiber was used to create new electro-thermo-hygromorph actuators with controlled and accelerated actuation compared to conventional hygromorphs. Finally, the design freedom provided by 4D printing made it possible to control the local stiffness and actuation of composite actuators reinforced with continuous flax fiber
Basit, Abdul. "Development and characterization of a shape memory polymer composite actuator for morphing structures." Thesis, Mulhouse, 2012. http://www.theses.fr/2012MULH8494/document.
Повний текст джерелаShape memory polymers (SMPs) are the materials which can return to their original shape when a suitable stimulus (e.g. heat) is provided. These polymers are programmed through shape memory cycle that consists of two parts: programming part which gives shape memory effect (SME) i.e. temporary shape to the polymer and the recovery part which return it to its original shape. SMPs have low stiffness, therefore, produce large recoverable strains, but produce low recovery forces. However, SMP composites produce larger recovery forces as they are relatively rigid but have less recoverable strains. Moreover, strong shape memory actuators can be produced if two different effects can be combined in a single structure. An already active structure (e.g shape memory alloys) can be embedded in SMP. Consequently, a strong coupled actuator can be obtained. In this work, the shape memory property of CBCM composite (an active composite that works on bimetallic affect) has been studied. CBCM stands for controlled behavior of composite material. CBCM activeness and its SM property has been coupled together to obtain a strong actuator. SM property has been obtained through thermo-mechanical programming at a temperature higher than glass transition temperature (Tg) of Epoxy resin used for its fabrication. The CBCM actuating properties have been studied through different one-step recoveries (unconstrained, constrained and recovery under load). Moreover, different asymmetrical CBCM composites have been developed by changing the position and orientation of the different layers used. These have been studied for their different actuation properties. Similarly, multi-step recoveries (unconstrained and constrained) have also been performed to show multi step actuation capabilities in CBCM. The actuating properties of CBCM have also been compared with symmetrical composite (SYM) to show the advantage of coupled properties in CBCM. It has been found that CBCM has the ability to give high strain, high recovery forces. Also, it can recover under load and recover to its original position at the temperatures lower than the deforming temperature used in the programming cycle
Книги з теми "Morphing composites"
Harnden, Ross, and Kungl Tekniska högskolan Staff. Lightweight Multifunctional Composites: An Investigation into Ion-Inserted Carbon Fibres for Structural Energy Storage, Shape-Morphing, Energy Harvesting and Strain-Sensing. Unknown Publisher, 2021.
Знайти повний текст джерелаЧастини книг з теми "Morphing composites"
LaCroix, Bradley W., and Peter G. Ifju. "Macro Fiber Composites and Substrate Materials for MAV Wing Morphing." In Experimental Mechanics of Composite, Hybrid, and Multifunctional Materials, Volume 6, 89–101. Cham: Springer International Publishing, 2013. http://dx.doi.org/10.1007/978-3-319-00873-8_12.
Повний текст джерелаMennu, M. M., B. Tran, P. G. Ifju, and E. Santamaria. "Full-Field Deformation Measurement of Morphing Wings." In Mechanics of Composite and Multi-functional Materials, Volume 5, 101–4. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30028-9_16.
Повний текст джерелаMennu, M. M., B. Tran, C. S. Tripp, and P. G. Ifju. "Design Study of Morphing Wing with MFC Actuators." In Mechanics of Composite, Hybrid and Multifunctional Materials , Volume 6, 61–64. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-59868-6_9.
Повний текст джерелаMennu, M. M., B. Tran, and P. G. Ifju. "Piezoelectric Actuators as Control Surfaces for Morphing Vehicle." In Mechanics of Composite, Hybrid and Multifunctional Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 3, 85–88. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-86741-6_14.
Повний текст джерела"Wing Morphing Design Using Macro-Fiber Composites." In Smart Composites, 183–226. CRC Press, 2013. http://dx.doi.org/10.1201/b16257-11.
Повний текст джерелаMat Yazik, M. H., and M. T. H. Sultan. "Shape memory polymer and its composites as morphing materials." In Failure Analysis in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, 181–98. Elsevier, 2019. http://dx.doi.org/10.1016/b978-0-08-102293-1.00009-7.
Повний текст джерелаAiroldi, Alessandro, Giuseppe Sala, Luca Angelo Di Landro, Paolo Bettini, and Alessandro Gilardelli. "Composite Corrugated Laminates for Morphing Applications." In Morphing Wing Technologies, 247–76. Elsevier, 2018. http://dx.doi.org/10.1016/b978-0-08-100964-2.00009-5.
Повний текст джерелаKim, J., and S. Ahn. "Fabrication of a soft morphing structure using a Shape Memory Alloy (SMA) wire/polymer skeleton composite." In Innovative Developments in Virtual and Physical Prototyping, 819–23. CRC Press, 2011. http://dx.doi.org/10.1201/b11341-132.
Повний текст джерелаТези доповідей конференцій з теми "Morphing composites"
Eckstein, E., and Paul Weaver. "Developments in Morphing Composites." In 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
20th AIAA/ASME/AHS Adaptive Structures Conference
14th AIAA. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2012. http://dx.doi.org/10.2514/6.2012-1378.
Brinkmeyer, Alex, Alberto Pirrera, Paul Weaver, and Matthew Santer. "Pseudo-Bistable Morphing Composites." In 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference
20th AIAA/ASME/AHS Adaptive Structures Conference
14th AIAA. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2012. http://dx.doi.org/10.2514/6.2012-1576.
Le Ferrand, Hortense. "Bioinspired multifunctional composites with morphing capabilities." In nanoGe Fall Meeting 2021. València: Fundació Scito, 2021. http://dx.doi.org/10.29363/nanoge.nfm.2021.001.
Повний текст джерелаTSUSHIMA, NATSUKI, TOMOHIRO YOKOZEKI, WEIHUA SU, and HITOSHI ARIZONO. "Nonlinear Aeroelastic Analysis of Composite Morphing Wing with Corrugated Structures." In American Society for Composites 2018. Lancaster, PA: DEStech Publications, Inc., 2018. http://dx.doi.org/10.12783/asc33/26174.
Повний текст джерелаEckstein, Eric, Michael C. Halbig, and Paul Weaver. "Thermally-Driven Morphing with High Temperature Composites." In 57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2016. http://dx.doi.org/10.2514/6.2016-1241.
Повний текст джерелаChillara, Venkata Siva, and Marcelo Dapino. "Shape memory alloy-actuated bistable composites for morphing structures." In Behavior and Mechanics of Multifunctional Materials and Composites XII, edited by Hani E. Naguib. SPIE, 2018. http://dx.doi.org/10.1117/12.2296713.
Повний текст джерелаMurugan, Senthil, Eric I. Saavedra Flores, Michael I. Friswell, and Sondipon Adhikari. "Optimal Design of Elastomer Composites for Morphing Skins." In ASME 2011 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2011. http://dx.doi.org/10.1115/smasis2011-5021.
Повний текст джерелаChillara, Venkata Siva C., and Marcelo J. Dapino. "Bistable morphing composites with selectively pre-stressed laminae." In SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, edited by Nakhiah C. Goulbourne. SPIE, 2017. http://dx.doi.org/10.1117/12.2259787.
Повний текст джерелаLele, Aditya, Oliver J. Myers, and Suyi Li. "Fabrication and Testing of Kirigami-Inspired Multi-Stable Composites." In ASME 2018 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/smasis2018-7981.
Повний текст джерелаEckstein, Eric, Alberto Pirrera, and Paul Weaver. "Thermally Driven Morphing with Hybrid Laminates and Metal Matrix Composites." In 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Reston, Virginia: American Institute of Aeronautics and Astronautics, 2015. http://dx.doi.org/10.2514/6.2015-1428.
Повний текст джерела