Готові списки джерел за темами / Modelling; induction machines; modelling

Добірка наукової літератури з теми "Modelling; induction machines; modelling"

Автор: Grafiati
Опубліковано: 10 грудня 2022
Оновлено: 28 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Modelling; induction machines; modelling".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Modelling; induction machines; modelling"

1

Coates, C., D. W. J. Pulle, and A. Veltman. "Modelling of single phase induction machines." Australian Journal of Electrical and Electronics Engineering 1, no. 3 (January 2004): 151–56. http://dx.doi.org/10.1080/1448837x.2004.11464101.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Slemon, G. R. "Modelling of induction machines for electric drives." IEEE Transactions on Industry Applications 25, no. 6 (1989): 1126–31. http://dx.doi.org/10.1109/28.44251.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Raju, M. Naga, and M. Sandhya Rani. "Mathematical Modelling of Linear Induction Motor." International Journal of Engineering & Technology 7, no. 4.24 (November 27, 2018): 111. http://dx.doi.org/10.14419/ijet.v7i4.24.21868.

Повний текст джерела
Анотація:
The Linear Induction Motor is a special purpose electrical machines it produces rectilinear motion in place of rotational motion. By using D-Q axes equivalent circuit the mathematical modelling is done because to distinguish dynamic behavior of LIM, because of the time varying parameters like end effect, saturation of core, and half filled slot the dynamic modelling of LIM is difficult. For simplification hear we are using the two axes modelling because to evade inductances time varying nature it becomes complex in modelling, this also reduces number of variables in the dynamic equation. Modelling is done using MATLAB/SIMULINK. LIM can be controlled by using sliding model control, vector control, and position control.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ouadi, Hamid, Fouad Giri, and Luc Dugard. "Accounting for magnetic saturation in induction machines modelling." International Journal of Modelling, Identification and Control 14, no. 1/2 (2011): 27. http://dx.doi.org/10.1504/ijmic.2011.042337.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Tenhunen, A., and A. Arkkio. "Modelling of induction machines with skewed rotor slots." IEE Proceedings - Electric Power Applications 148, no. 1 (2001): 45. http://dx.doi.org/10.1049/ip-epa:20010036.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Kindl, Vladimir, Miroslav Byrtus, Bohumil Skala, and Vaclav Kus. "Key Assembling Issues Relating to Mechanical Vibration of Fabricated Rotor of Large Induction Machines." Communications - Scientific letters of the University of Zilina 21, no. 2 (May 24, 2019): 58–68. http://dx.doi.org/10.26552/com.c.2019.2.58-68.

Повний текст джерела
Анотація:
In many applications, where rotating machines of high power are used, high demands on reliability and safety are laid. Precise manufacturing procedures has to be kept even in case of machines retrofits when e.g. rotors are newly assembled. Even small inaccuracies or misguiding the precise technological procedure can lead to improper running of the machine and it can result in shut-down of complete drive. In case of primary circuits of nuclear power plants, it further means the shut-down of the whole power plant. Consequently, it results in significant financial losses (foregone profit and cost given by problem fixing). The paper presents a methodology of vibration origin investigation in case of large rotating machines which are part of drives like pump, compressors etc. The methodology is based on the detection of undesirable vibration using a diagnostic system on-site and further it uses mathematical modelling of corresponding mechanical parts to reveal the vibration origin. The modelling along with the measurement showed that the detected dangerous vibration is caused by misguided assembling of the rotor of the machine.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Mekahlia, Abdelhak, Eric Semail, Franck Scuiller, and Hussein Zahr. "Reduced-Order Model of Rotor Cage in Multiphase Induction Machines: Application on the Prediction of Torque Pulsations." Mathematical and Computational Applications 25, no. 1 (January 29, 2020): 11. http://dx.doi.org/10.3390/mca25010011.

Повний текст джерела
Анотація:
For three-phase induction machines supplied by sinusoidal current, it is usual to model the n-bar squirrel-cage by an equivalent two-phase circuit. For a multiphase induction machine which can be supplied with different harmonics of current, the reduced-order model of the rotor must be more carefully chosen in order to predict the pulsations of torque. The proposed analysis allows to avoid a wrong design with non-sinusoidal magnetomotive forces. An analytical approach is proposed and confirmed by Finite-Element modelling at first for a three-phase induction machine and secondly for a five-phase induction machine.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Terron-Santiago, Carla, Javier Martinez-Roman, Ruben Puche-Panadero, and Angel Sapena-Bano. "A Review of Techniques Used for Induction Machine Fault Modelling." Sensors 21, no. 14 (July 16, 2021): 4855. http://dx.doi.org/10.3390/s21144855.

Повний текст джерела
Анотація:
Over the years, induction machines (IMs) have become key components in industry applications as mechanical power sources (working as motors) as well as electrical power sources (working as generators). Unexpected breakdowns in these components can lead to unscheduled down time and consequently to large economic losses. As breakdown of IMs for failure study is not economically feasible, several IM computer models under faulty conditions have been developed to investigate the characteristics of faulty machines and have allowed reducing the number of destructive tests. This paper provides a review of the available techniques for faulty IMs modelling. These models can be categorised as models based on electrical circuits, on magnetic circuits, models based on numerical methods and the recently proposed in the technical literature hybrid models or models based on finite element method (FEM) analytical techniques. A general description of each type of model is given with its main benefits and drawbacks in terms of accuracy, running times and ability to reproduce a given fault.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

HARROUZ, Abdelkader, Fadila TAHIRI, Fatiha BEKRAOUI, and Ibrahim BOUSSAID. "Modelling and Simulation of Synchronous Inductor Machines." Algerian Journal of Renewable Energy and Sustainable Development 01, no. 01 (June 15, 2019): 8–23. http://dx.doi.org/10.46657/ajresd.2019.1.1.2.

Повний текст джерела
Анотація:
This study focuses on the study of the compartment of the synchronous inductor machine with variable speed, fed by a threephase inverter. Several transients were treated by simulation (start unloading, introducing a torque load, reversing and speed setpoint change). Then engine cushion at both loss and when starting without the damper. In addition, robustness tests on the parametric variation of (MSRB) were also performed. Based on the results of simulations, the control technique studied makes it possible to obtain good dynamic and static performances and has a robustness with respect to the external perturbation and the parametric variation.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

M S, Bhagyashree, and Mrs Raksha Adappa. "Modelling And Simulation Of An Induction Machine." IJIREEICE 4, no. 2 (April 11, 2016): 119–23. http://dx.doi.org/10.17148/ijireeice/ncaee.2016.24.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Modelling; induction machines; modelling"

1

Göl, Özdemir. "Dynamic modelling of induction machines /." Title page, contents and abstract only, 1993. http://web4.library.adelaide.edu.au/theses/09PH/09phg595.pdf.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Abdi-Jalebi, Ehsan. "Modelling and instrumentation of Brushless Doubly-Fed (induction) Machines." Thesis, University of Cambridge, 2007. https://www.repository.cam.ac.uk/handle/1810/252033.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ahmed, M. M. "Modelling of inverter-fed induction machine." Thesis, University of Manchester, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234246.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Potter, Benjamin Alexander. "Investigation into the input impedance of induction machines using measurement and modelling." Thesis, University of Reading, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.501347.

Повний текст джерела
Анотація:
This thesis presents material that aims to further the understanding of the variation of the input impedance of induction machines with frequency. The input impedance is shown to be of importance when predicting or mitigating the effects of harmonics in machines that are driven by an inverter. The main body of this thesis consists of experimental results from a study that characterises the input impedance of thirteen different induction machines of various sizes and with different numbers of poles.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Andersen, Peter Scavenius. "Modelling and analysis of asynchronous and synchronous torques in split-phase induction machines." Thesis, University of Glasgow, 2008. http://theses.gla.ac.uk/82/.

Повний текст джерела
Анотація:
In this thesis, the nature of asynchronous and synchronous torques in a split-phase induction machine is investigated and quantified. The equivalent circuit for this type of machine is derived using the rotating field theory. It is extended to include harmonic effects. Using this model, winding harmonics and permeance harmonics may be calculated independently of each other so that the model can be used to analyse asynchronous torques from winding harmonics as well as synchronous torques from permeance harmonics. These are calculated separately. The asynchronous torques appear as perturbations in the steady-state torque-speed curve while the synchronous torques only appear at specific speeds. The synchronous torques are superimposed onto the torque-speed curves to model both effects together. The model predictions are compared against test results using purpose-built experimental machines together with production machines. These have varying rotor bar number and skew. Different methods are used to assess the synchronous torques. It is found that measuring synchronous locking torque is not a straightforward matter; however, reasonable agreement is found between calculation and measurement. The work highlights the need for the correct choice of stator and rotor slot numbers together with the effect skew has on reducing the synchronous and asynchronous locking torques.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Okoro, Ogbonnaya Inya. "Dynamic and thermal modelling of induction machine with non-linear effects." Kassel : Kassel Univ. Press, 2002. http://deposit.d-nb.de/cgi-bin/dokserv?idn=969576749.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Sprooten, Jonathan. "Finite element and electrical circuit modelling of faulty induction machines: Study of internal effects and fault detection techniques." Doctoral thesis, Universite Libre de Bruxelles, 2007. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/210674.

Повний текст джерела
Анотація:
This work is dedicated to faulty induction motors. These motors are often used in industrial applications thanks to their usability and their robustness. However, nowadays optimisation of production becomes so critical that the conceptual reliability of the motor is not sufficient anymore. Motor condition monitoring is expanding to serve maintenance planning and uptime maximisation. Moreover, the use of drive control sensors (namely stator current and voltage) can avoid the installation and maintenance of dedicated sensors for condition monitoring.

Many authors are working in this field but few approach the diagnosis from a detailed and clear physical understanding of the localised phenomena linked to the faults. Broken bars are known to modulate stator currents but it is shown in this work that it also changes machine saturation level in the neighbourhood of the bar. Furthermore, depending on the voltage level, this change in local saturation affects the amplitude and the phase of the modulation. This is of major importance as most diagnosis techniques use this feature to detect and quantify broken bars. For stator short-circuits, a high current is flowing in the short-circuited coil due to mutual coupling with the other windings and current spikes are flowing in the rotor bars as they pass in front of the short-circuited conductors. In the case of rotor eccentricities, the number of pole-pairs and the connection of these pole-pairs greatly affect the airgap flux density distribution as well as the repartition of the line currents in the different pole-pairs.

These conclusions are obtained through the use of time-stepping finite element models of the faulty motors. Moreover, circuit models of faulty machines are built based on the conclusions of previously explained fault analysis and on classical Park models. A common mathematical description is used which allows objective comparison of the models for representation of the machine behaviour and computing time.

The identifiability of the parameters of the models as well as methods for their identification are studied. Focus is set on the representation of the machine behaviour using these parameters more than the precise identification of the parameters. It is shown that some classical parameters can not be uniquely identified using only stator measurements.

Fault detection and identification using computationally cheap models are compared to advanced detection through motor stator current spectral analysis. This last approach allows faster detection and identification of the fault but leads to incorrect conclusions in low load conditions, in transient situations or in perturbed environments (i.e. fluctuating load torque and unideal supply). Efficient quantification of the fault can be obtained using detection techniques based on the comparison of the process to a model.

Finally, the work provides guidelines for motor supervision strategies depending on the context of motor utilisation.
Doctorat en Sciences de l'ingénieur
info:eu-repo/semantics/nonPublished

Стилі APA, Harvard, Vancouver, ISO та ін.
8

Okoro, Ogbonnaya Inya [Verfasser]. "Dynamic and thermal modelling of induction machine with non-linear effects / Ogbonnaya Inya Okoro." Kassel : Kassel Univ. Press, 2002. http://d-nb.info/969576749/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Cordier, Julien [Verfasser], Ralph [Akademischer Betreuer] Kennel, Ralph [Gutachter] Kennel, and Jean-Luc [Gutachter] Thomas. "Modelling space harmonics in induction machines for real-time applications / Julien Cordier ; Gutachter: Ralph Kennel, Jean-Luc Thomas ; Betreuer: Ralph Kennel." München : Universitätsbibliothek der TU München, 2020. http://d-nb.info/1203799578/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Jorks, Hai Van [Verfasser], Thomas [Akademischer Betreuer] Weiland, Kay [Akademischer Betreuer] Hameyer, Andreas [Akademischer Betreuer] Binder, Gerd [Akademischer Betreuer] Griepentrog, and Sebastian [Akademischer Betreuer] Schöps. "Transmission Line Modelling for Inverter-Fed Induction Machines / Hai Van Jorks. Betreuer: Thomas Weiland ; Kay Hameyer ; Andreas Binder ; Gerd Griepentrog ; Sebastian Schöps." Darmstadt : Universitäts- und Landesbibliothek Darmstadt, 2015. http://d-nb.info/1110981155/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Modelling; induction machines; modelling"

1

Moraitis, I. Modelling of governors for induction generators. Manchester: UMIST, 1995.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Nestor, John P. Security modelling using hierarchical state machines. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1991.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Alberta. Scientific and Engineering Services and Research Division. Mathematical modelling of automedium cyclones. Edmonton, AB: Alberta Energy, Scientific and Engineering Services and Research Division, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Berry, R. H. Rule induction for data modelling and model interpretation. Norwich: School of Information Systems, University of East Anglia, 1991.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Hobson, J. B. Modelling for quality control in CNC machines. Hertford: University of Hertfordshire, Business School, 1992.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Masmoudi, Ahmed. Control Oriented Modelling of AC Electric Machines. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-9056-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

1954-, Lozano R., and Dzul Alejandro E, eds. Modelling and control of mini-flying machines. London: Springer, 2005.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Mohamed, Abdulatif Abdusalam. Modelling and simulation of a cycloconverter induction motor drive. Leicester: De Montfort University, 1998.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Nerg, Janne. Numerical modelling and design of static induction heating coils. Lappeenranta, Finland: Lappeenranta University of Technology, 2000.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

1956-, Belmans R., ed. Numerical modelling and design of electrical machines and devices. Southampton, UK: WIT Press, 1999.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Modelling; induction machines; modelling"

1

Boldea, Ion. "Thermal Modelling and Cooling." In Induction Machines Handbook, 339–60. Third edition. | Boca Raton: CRC Press, 2020. |: CRC Press, 2020. http://dx.doi.org/10.1201/9781003033417-12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Masmoudi, Ahmed. "Induction Machine Modelling." In SpringerBriefs in Electrical and Computer Engineering, 1–38. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-9056-1_1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Vepa, Ranjan. "Modelling of Synchronous and Induction Machines." In Lecture Notes in Energy, 113–39. London: Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-5400-6_3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Melkebeek, Jan A. "Modelling and Dynamic Behaviour of Induction Machines." In Electrical Machines and Drives, 591–622. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72730-1_27.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Andersen, Peter Bøgh, and Palle Nowack. "Modelling Moving Machines." In Virtual Applications, 189–211. London: Springer London, 2004. http://dx.doi.org/10.1007/978-1-4471-3746-7_9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Bermúdez, Alfredo. "Some Case Studies in Environmental and Industrial Mathematics." In SEMA SIMAI Springer Series, 19–38. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-86236-7_2.

Повний текст джерела
Анотація:
AbstractThis presentation deals with four case studies in environmental and industrial mathematics developed by the mathematical engineering research group (mat+i) from the University of Santiago de Compostela and the Technological Institute for Industrial Mathematics (ITMATI). The first case involves environmental fluid mechanics: optimizing the location of submarine outfalls on the coast. This work, related to shallow water equations with variable depth, led us to develop a theory for numerical treatment of source terms in nonlinear first order hyperbolic balance laws. More recently, these techniques have been applied to solve Euler equations with source terms arising from numerical simulation of gas transportation networks when topography via gravity force is considered in the model. The last two problems concerns electromagnetism. One of them is related to nondestructive testing of car parts by using magnetic nanoparticles (the so-called magnetic particle inspection, MPI): mathematical modelling of magnetic hysteresis to simulate demagnetization. Finally, we present a mathematical procedure to reduce the computing time needed to achieve the stationary state of an induction electric machine when using transient numerical simulation.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Mancini, Giuseppe. "Modelling Humans and Machines." In NATO ASI Series, 307–23. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-50329-0_19.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

O’Carroll, M. J., and P. C. Hudson. "Analysis of Vibration Compacting Machines." In Industrial Vibration Modelling, 197–205. Dordrecht: Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-4480-0_14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Sharples, Mike, and Rafael Pérez y Pérez. "Modelling the mind of a writer." In Story Machines, 115–25. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003161431-9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Milano, Federico. "Alternate-Current Machines." In Power System Modelling and Scripting, 325–53. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13669-6_15.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Modelling; induction machines; modelling"

1

Rodger, D. "Modelling axial airgap induction machines." In IEE Seminar Axial Airgap Machines. IEE, 2001. http://dx.doi.org/10.1049/ic:20010089.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Maliti, K. C. "Modelling magnetic noise in induction machines." In Eighth International Conference on Electrical Machines and Drives. IEE, 1997. http://dx.doi.org/10.1049/cp:19971108.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

null. "Small induction machines - the designer's choice." In IEE Colloquium on Modelling the Performance of Electrical Machines. IEE, 1997. http://dx.doi.org/10.1049/ic:19970899.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Li Yao, Keith J. Bradley, Phillip Sewell, and David Gerada. "Cascaded doubly fed induction machine system modelling based on Dynamic Reluctance Mesh modelling method." In 2008 International Conference on Electrical Machines (ICEM). IEEE, 2008. http://dx.doi.org/10.1109/icelmach.2008.4799896.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Strous, T. D., N. H. van der Blij, H. Polinder, and J. A. Ferreira. "Brushless Doubly-Fed Induction Machines: Magnetic field modelling." In 2014 XXI International Conference on Electrical Machines (ICEM). IEEE, 2014. http://dx.doi.org/10.1109/icelmach.2014.6960570.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Cusido, J., L. Romeral, M. Delgado, A. Garcia, and J. A. Ortega. "Induction machines fault simulation based on FEM modelling." In 2007 European Conference on Power Electronics and Applications. IEEE, 2007. http://dx.doi.org/10.1109/epe.2007.4417511.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Velazquez, R., and A. C. Smith. "Electromagnetic modelling of high speed induction motors." In 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016). Institution of Engineering and Technology, 2016. http://dx.doi.org/10.1049/cp.2016.0126.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Marfoli, A., L. Papini, P. Bolognesi, D. Genovese, and C. Gerada. "Analysis of induction machine: Comparison of modelling techniques." In 2017 IEEE International Electric Machines and Drives Conference (IEMDC). IEEE, 2017. http://dx.doi.org/10.1109/iemdc.2017.8002400.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Nabiyev, Fuad M. "Mathematical modelling of electromagnetic forces in Linear Induction Motors." In 2008 International Conference on Electrical Machines (ICEM). IEEE, 2008. http://dx.doi.org/10.1109/icelmach.2008.4800009.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Issaouni, Salim, Abdesselem Boulkroune, and Hachemi Chekireb. "Adaptive intelligent backstepping controller of induction machines." In 2016 8th International Conference on Modelling, Identification and Control (ICMIC). IEEE, 2016. http://dx.doi.org/10.1109/icmic.2016.7804198.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Modelling; induction machines; modelling"

1

Savosko, V., I. Komarova, Yu Lykholat, E. Yevtushenko, and T. Lykholat. Predictive model of heavy metals inputs to soil at Kryvyi Rih District and its use in the training for specialists in the field of Biology. IOP Publishing, 2021. http://dx.doi.org/10.31812/123456789/4511.

Повний текст джерела
Анотація:
The importance of our research is due to the need to introduce into modern biological education methods of predictive modeling which are based on relevant factual material. Such an actual material may be the entry of natural and anthropic heavy metals into the soil at industrial areas. The object of this work: (i) to work out a predictive model of the total heavy metals inputs to soil at the Kryvyi Rih ore-mining & metallurgical District and (ii) to identify ways to use this model in biological education. Our study areas are located in the Kryvyi Rih District (Dnipropetrovsk region, Central Ukraine). In this work, classical scientific methods (such as analysis and synthesis, induction and deduction, analogy and formalization, abstraction and concretization, classification and modelling) were used. By summary the own research results and available scientific publications, the heavy metals total inputs to soils at Kryvyi Rih District was predicted. It is suggested that the current heavy metals content in soils of this region due to 1) natural and 2) anthropogenic flows, which are segmented into global and local levels. Predictive calculations show that heavy metals inputs to the soil of this region have the following values (mg ⋅ m2/year): Fe – 800-80 000, Mn – 125-520, Zn – 75-360, Ni – 20-30, Cu – 15-50, Pb – 7.5-120, Cd – 0.30-0.70. It is established that anthropogenic flows predominate in Fe and Pb inputs (60-99 %), natural flows predominate in Ni and Cd inputs (55-95 %). While, for Mn, Zn, and Cu inputs the alternate dominance of natural and anthropogenic flows are characterized. It is shown that the predictive model development for heavy metals inputs to soils of the industrial region can be used for efficient biological education (for example in bachelors of biologists training, discipline "Computer modelling in biology").
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Савосько, Василь Миколайович, Ірина Олександрівна Комарова, Юрій Васильович Лихолат, Едуард Олексійович Євтушенко,, and Тетяна Юріївна Лихолат. Predictive Model of Heavy Metals Inputs to Soil at Kryvyi Rih District and its Use in the Training for Specialists in the Field of Biology. IOP Publishing, 2021. http://dx.doi.org/10.31812/123456789/4266.

Повний текст джерела
Анотація:
The importance of our research is due to the need to introduce into modern biological education methods of predictive modeling which are based on relevant factual material. Such an actual material may be the entry of natural and anthropic heavy metals into the soil at industrial areas. The object of this work: (i) to work out a predictive model of the total heavy metals inputs to soil at the Kryvyi Rih ore-mining & metallurgical District and (ii) to identify ways to use this model in biological education. Our study areas are located in the Kryvyi Rih District (Dnipropetrovsk region, Central Ukraine). In this work, classical scientific methods (such as analysis and synthesis, induction and deduction, analogy and formalization, abstraction and concretization, classification and modelling) were used. By summary the own research results and available scientific publications, the heavy metals total inputs to soils at Kryvyi Rih District was predicted. It is suggested that the current heavy metals content in soils of this region due to 1) natural and 2) anthropogenic flows, which are segmented into global and local levels. Predictive calculations show that heavy metals inputs to the soil of this region have the following values ( mg ∙ m ଶ year ⁄ ): Fe – 800-80 000, Mn – 125-520, Zn – 75-360, Ni – 20-30, Cu – 15-50, Pb – 7.5-120, Cd – 0.30-0.70. It is established that anthropogenic flows predominate in Fe and Pb inputs (60-99 %), natural flows predominate in Ni and Cd inputs (55-95 %). While, for Mn, Zn, and Cu inputs the alternate dominance of natural and anthropogenic flows are characterized. It is shown that the predictive model development for heavy metals inputs to soils of the industrial region can be used for efficient biological education (for example in bachelors of biologists training, discipline “Computer modelling in biology”).
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Modelling; induction machines; modelling" для конкретних типів джерел:
Статті в журналах Дисертації Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії