Статті в журналах з теми "Microstructure"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Microstructure".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Suzuki, Asuka, Yusuke Sasa, Makoto Kobashi, Masaki Kato, Masahito Segawa, Yusuke Shimono, and Sukeharu Nomoto. "Persistent Homology Analysis of the Microstructure of Laser-Powder-Bed-Fused Al–12Si Alloy." Materials 16, no. 22 (November 18, 2023): 7228. http://dx.doi.org/10.3390/ma16227228.
Повний текст джерелаZeng, Qiu Lian, Zhong Guang Wang, and J. K. Shang. "Microstructural Effects on Low Cycle Fatigue of Sn-3.8Ag-0.7Cu Pb-Free Solder." Key Engineering Materials 345-346 (August 2007): 239–42. http://dx.doi.org/10.4028/www.scientific.net/kem.345-346.239.
Повний текст джерелаTrzciński, Jerzy, and Emilia Wójcik. "Application of microstructure classification for the assessment of the variability of geological-engineering and pore space properties in clay soils." Open Geosciences 11, no. 1 (June 12, 2019): 236–48. http://dx.doi.org/10.1515/geo-2019-0019.
Повний текст джерелаDolzhenko, Anastasiia, Marina Tikhonova, Rustam Kaibyshev, and Andrey Belyakov. "Microstructures and Mechanical Properties of Steels and Alloys Subjected to Large-Strain Cold-to-Warm Deformation." Metals 12, no. 3 (March 8, 2022): 454. http://dx.doi.org/10.3390/met12030454.
Повний текст джерелаTian, Yan, Mingchun Zhao, Wenjian Liu, Jimou Zhang, Min Zhang, Hongying Li, Dengfeng Yin, and Andrej Atrens. "Comparison on Tensile Characteristics of Plain C–Mn Steel with Ultrafine Grained Ferrite/Cementite Microstructure and Coarse Grained Ferrite/Pearlite Microstructure." Materials 14, no. 9 (April 29, 2021): 2309. http://dx.doi.org/10.3390/ma14092309.
Повний текст джерелаHua, Tian, Ziyin Xiang, Xiangling Xia, Zhangling Li, Dandan Sun, Yuanzhao Wu, Yiwei Liu, Jie Shang, Jun Chen, and Runwei Li. "A Sensitivity-Optimized Flexible Capacitive Pressure Sensor with Cylindrical Ladder Microstructural Dielectric Layers." Sensors 23, no. 9 (April 27, 2023): 4323. http://dx.doi.org/10.3390/s23094323.
Повний текст джерелаMorri, A., L. Ceschini, M. Pellizzari, C. Menapace, F. Vettore, and E. Veneri. "Effect of the Austempering Process on the Microstructure and Mechanical Properties of 27MnCrB5-2 Steel." Archives of Metallurgy and Materials 62, no. 2 (June 1, 2017): 643–51. http://dx.doi.org/10.1515/amm-2017-0094.
Повний текст джерелаMüller, Martin, Marie Stiefel, Björn-Ivo Bachmann, Dominik Britz, and Frank Mücklich. "Overview: Machine Learning for Segmentation and Classification of Complex Steel Microstructures." Metals 14, no. 5 (May 7, 2024): 553. http://dx.doi.org/10.3390/met14050553.
Повний текст джерелаAbdalla, Ayad Omran, Astuty Amrin, Roslina Mohammad, and M. A. Azmah Hanim. "Microstructural Study of Newly Designed Ti-6Al-1Fe Alloy through Deformation." Solid State Phenomena 264 (September 2017): 54–57. http://dx.doi.org/10.4028/www.scientific.net/ssp.264.54.
Повний текст джерелаGallardo-Basile, Francisco-José, Yannick Naunheim, Franz Roters, and Martin Diehl. "Lath Martensite Microstructure Modeling: A High-Resolution Crystal Plasticity Simulation Study." Materials 14, no. 3 (February 2, 2021): 691. http://dx.doi.org/10.3390/ma14030691.
Повний текст джерелаLannutti, J. J. "Characterization and Control of Compact Microstructure." MRS Bulletin 22, no. 12 (December 1997): 38–44. http://dx.doi.org/10.1557/s0883769400034734.
Повний текст джерелаWeng, Yung-Jin, Jen-Ching Huang, Yueh-Yang Chen, Shao-Teng Hsu, and Zu-Rong Zhang. "A Study on the Dynamic Forming Mechanism Development of the Negative Poisson’s Ratio Elastomer Molds—Plate to Plate (P2P) Forming Process." Polymers 13, no. 19 (September 24, 2021): 3255. http://dx.doi.org/10.3390/polym13193255.
Повний текст джерелаIto, Tsutomu, and Takashi Mizuguchi. "Superplastic Elongation through Deformation Mechanism Transition during High-Temperature Deformation in Thermally Unstable Fine-Grained Aluminum Solid Solution Alloy." Key Engineering Materials 723 (December 2016): 21–26. http://dx.doi.org/10.4028/www.scientific.net/kem.723.21.
Повний текст джерелаNolan, T. P., R. Sinclair, T. Yamashita, and R. Ranjan. "Correlation of micro-structural, micro-chemical and micro-magnetic properties of longitudinal recording media using CM20FEG Lorentz TEM." Proceedings, annual meeting, Electron Microscopy Society of America 52 (1994): 892–93. http://dx.doi.org/10.1017/s042482010017219x.
Повний текст джерелаHan, Yuexing, Chuanbin Lai, Bing Wang, Tianyi Hu, Dongli Hu, and Hui Gu. "SEGMENTATION AND ANALYSIS METHOD FOR TWO-PHASE CERAMIC (HfB2-B4C) BASED ON THE DETECTION OF VIRTUAL BOUNDARIES." Image Analysis & Stereology 38, no. 1 (April 11, 2019): 95. http://dx.doi.org/10.5566/ias.1992.
Повний текст джерелаDing, Qingqing, Hongbin Bei, Xinbao Zhao, Yanfei Gao, and Ze Zhang. "Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy." Crystals 10, no. 7 (July 3, 2020): 572. http://dx.doi.org/10.3390/cryst10070572.
Повний текст джерелаSachana, Suphattra, Kohei Morishita, and Hirofumi Miyahara. "Microstructural Examination of Molten Marks on Copper Wire for Fire Investigation." Forensic Sciences 3, no. 1 (January 6, 2023): 12–19. http://dx.doi.org/10.3390/forensicsci3010002.
Повний текст джерелаMurr, L. E. "Microstructure-property hypermaps for shock-loaded materials." Proceedings, annual meeting, Electron Microscopy Society of America 44 (August 1986): 416–19. http://dx.doi.org/10.1017/s0424820100143675.
Повний текст джерелаAnisimov, Evgeniy, Jan Manak, Maxim Puchnin, and Pavel Sachr. "The Effect of Microstructural Features on Mechanical Properties." Key Engineering Materials 606 (March 2014): 47–50. http://dx.doi.org/10.4028/www.scientific.net/kem.606.47.
Повний текст джерелаDong, Qin, Zhong Wei Yin, Hu Lin Li, Yang Mao, and Geng Yuan Gao. "3D Reconstruction of Microstructure for Centrifugal Casting Babbitt Lining of Bimetallic Bearing Based on Mimics." Key Engineering Materials 841 (May 2020): 94–98. http://dx.doi.org/10.4028/www.scientific.net/kem.841.94.
Повний текст джерелаJames, R. D. "Microstructure of Shape-Memory and Magnetostrictive Materials." Applied Mechanics Reviews 43, no. 5S (May 1, 1990): S189—S193. http://dx.doi.org/10.1115/1.3120802.
Повний текст джерелаMossaab, Blaoui Mohammed, Mokhtar Zemri, and Mustapha Arab. "Effect of medium carbon steel microstructure on tensile strength and fatigue crack growth." International Journal of Structural Integrity 10, no. 1 (February 4, 2019): 67–75. http://dx.doi.org/10.1108/ijsi-05-2018-0030.
Повний текст джерелаBasanta, David, Mark A. Miodownik, Elizabeth A. Holm, and Peter J. Bentley. "Evolving 3D Microstructures Using a Genetic Algorithm." Materials Science Forum 467-470 (October 2004): 1019–24. http://dx.doi.org/10.4028/www.scientific.net/msf.467-470.1019.
Повний текст джерелаBelan, Juraj, Alan Vaško, Lenka Kuchariková, and Eva Tillová. "Metallography Evaluation of Cast and Wrought Ni-Base Superalloys." Materials Science Forum 891 (March 2017): 414–19. http://dx.doi.org/10.4028/www.scientific.net/msf.891.414.
Повний текст джерелаLi, Luoyang, Marissa J. Betts, Hao Yun, Bing Pan, Timothy P. Topper, Guoxiang Li, Xingliang Zhang, and Christian B. Skovsted. "Fibrous or Prismatic? A Comparison of the Lamello-Fibrillar Nacre in Early Cambrian and Modern Lophotrochozoans." Biology 12, no. 1 (January 11, 2023): 113. http://dx.doi.org/10.3390/biology12010113.
Повний текст джерелаKim, Young Ho, Jeong-Woo Sohn, Youngjae Woo, Joo-Hyun Hong, Gyu Man Kim, Bong Keun Kang, and Juyoung Park. "Preparation of Microstructure Molds of Montmorillonite/Polyethylene Glycol Diacrylate and Multi-Walled Carbon Nanotube/Polyethylene Glycol Diacrylate Nanocomposites for Miniaturized Device Applications." Journal of Nanoscience and Nanotechnology 15, no. 10 (October 1, 2015): 7860–65. http://dx.doi.org/10.1166/jnn.2015.11224.
Повний текст джерелаFan, Fang-Yu, Hsin-Hua Chou, Wei-Chun Lin, Chiung-Fang Huang, Yi Lin, Yung-Kang Shen, and Muhammad Ruslin. "Optimized Micro-Pattern Design and Fabrication of a Light Guide Plate Using Micro-Injection Molding." Polymers 13, no. 23 (December 3, 2021): 4244. http://dx.doi.org/10.3390/polym13234244.
Повний текст джерелаKovalčíková, Alexandra, Ján Balko, and Ján Dusza. "Influence of Microstructure on Tribological Properties and Nanohardness of Silicon Carbide Ceramics." Key Engineering Materials 662 (September 2015): 55–58. http://dx.doi.org/10.4028/www.scientific.net/kem.662.55.
Повний текст джерелаRodriguez vargas, Bryan ramiro, Luciano Albini, Giulia Tiracorrendo, Riccardo Massi, Giulia Stornelli, and Andrea Di Schino. "EFFECT OF ULTRAFAST HEATING ON AISI 304 AUSTENITIC STAINLESS STEEL." Acta Metallurgica Slovaca 29, no. 2 (June 20, 2023): 104–7. http://dx.doi.org/10.36547/ams.29.2.1833.
Повний текст джерелаYEOM, JONG-TAEK, JEOUNG HAN KIM, JAE-KEUN HONG, NHO-KWANG PARK, and CHONG SOO LEE. "INFLUENCE OF INITIAL MICROSTRUCTURE ON HOT WORKABILITY OF Ti-6Al-4V ALLOY." International Journal of Modern Physics B 23, no. 06n07 (March 20, 2009): 808–13. http://dx.doi.org/10.1142/s0217979209060063.
Повний текст джерелаMeng, Yi, Hui Min Zhou, Jia Lin Gan, and Sumio Sugiyama. "Microstructural Evolution of SKD11 Tool Steel during Multi-Stage Thixoforming and Subsequent Heat Treatments." Solid State Phenomena 285 (January 2019): 45–50. http://dx.doi.org/10.4028/www.scientific.net/ssp.285.45.
Повний текст джерелаChen, Haisheng, Fang Hao, Shixing Huang, Jing Yang, Shaoqiang Li, Kaixuan Wang, Yuxuan Du, Xianghong Liu та Xiaotong Yu. "The Effects of Microstructure on the Dynamic Mechanical Response and Adiabatic Shearing Behaviors of a Near-α Ti-6Al-3Nb-2Zr-1Mo Alloy". Materials 16, № 4 (7 лютого 2023): 1406. http://dx.doi.org/10.3390/ma16041406.
Повний текст джерелаSantos, Dagoberto Brandão, Élida G. Neves, and Elena V. Pereloma. "Effect of Processing Route on Mechanical Behavior of C-Mn Multiphase High Strength Cold Rolled Steel." Materials Science Forum 539-543 (March 2007): 4375–80. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.4375.
Повний текст джерелаNguyen, Thao A., Tadashi Yogi, and Steven E. Lambert. "The effect of sputtering pressure on microstructure and recording performance of high-density magnetic recording media." Proceedings, annual meeting, Electron Microscopy Society of America 48, no. 4 (August 1990): 770–71. http://dx.doi.org/10.1017/s0424820100176988.
Повний текст джерелаSfikas, Athanasios K., Spyros Kamnis, Martin C. H. Tse, Katerina A. Christofidou, Sergio Gonzalez, Alexandros E. Karantzalis, and Emmanuel Georgatis. "Microstructural Evaluation of Thermal-Sprayed CoCrFeMnNi0.8V High-Entropy Alloy Coatings." Coatings 13, no. 6 (May 28, 2023): 1004. http://dx.doi.org/10.3390/coatings13061004.
Повний текст джерелаBarboza, Luis, Enrique López, Hugo Guajardo, and Armando Salinas. "Effect of Initial Microstructure on the Temperature Dependence of the Flow Stress and Deformation Microstructure under Uniaxial Compression of Ti-407." Metals 14, no. 5 (April 26, 2024): 505. http://dx.doi.org/10.3390/met14050505.
Повний текст джерелаCarter, Joseph G., and George R. Clark. "Classification and Phylogenetic Significance of Molluscan Shell Microstructure." Notes for a Short Course: Studies in Geology 13 (1985): 50–71. http://dx.doi.org/10.1017/s0271164800001093.
Повний текст джерелаHan, Dong, Yongqing Zhao, and Weidong Zeng. "Effect of Zr Addition on the Mechanical Properties and Superplasticity of a Forged SP700 Titanium Alloy." Materials 14, no. 4 (February 14, 2021): 906. http://dx.doi.org/10.3390/ma14040906.
Повний текст джерелаVurobi, Selauco, Thiago Ferreira de Andrade, and Osvaldo Mitsuyuki Cintho. "Utilization of Color Metallography in Characterization of a Modified SAE 4118H Steel Submitted to Isothermal Treatments." Materials Science Forum 805 (September 2014): 242–47. http://dx.doi.org/10.4028/www.scientific.net/msf.805.242.
Повний текст джерелаTao, Xue Li, Kai Ming Wu, and Xiang Liang Wan. "Effect of Nb on Microstructure Evolution of Coarse-Grained Heat-Affected Zone with Large Heat Input Welding." Advanced Materials Research 284-286 (July 2011): 1174–79. http://dx.doi.org/10.4028/www.scientific.net/amr.284-286.1174.
Повний текст джерелаMohideen, S. Rasool, Ahmad Zaidi Ahmad Mujahid, Abdullah Shohaimi, and S. Ravi. "Metallographic Investigation on the Effect of Cryogenic Temperature on Steel Weldments." Applied Mechanics and Materials 629 (October 2014): 456–60. http://dx.doi.org/10.4028/www.scientific.net/amm.629.456.
Повний текст джерелаAgboola, Joseph, Emmanuel Anyoku, and Atinuke Oladoye. "Effects of Cooling Rate on the Microstructure, Mechanical Properties and Corrosion Resistance of 6xxx Aluminium Alloy." International Journal of Engineering Materials and Manufacture 6, no. 1 (January 30, 2021): 43–49. http://dx.doi.org/10.26776/ijemm.06.01.2021.04.
Повний текст джерелаTang, Wei Neng, Rong Shi Chen, En Hou Han, and Wei Ke. "Flow Behavior and Microstructural Evolution of ZW61 Alloy during Hot Compressive Deformation." Materials Science Forum 686 (June 2011): 140–45. http://dx.doi.org/10.4028/www.scientific.net/msf.686.140.
Повний текст джерелаTalmon, Yeshayahu. "Cryo-TEM of amphiphilic polymer and amphiphile/polymer solutions." Proceedings, annual meeting, Electron Microscopy Society of America 51 (August 1, 1993): 876–77. http://dx.doi.org/10.1017/s0424820100150216.
Повний текст джерелаXu, Bin, Kang Guo, Likuan Zhu, Xiaoyu Wu, and Jianguo Lei. "Applying Foil Queue Microelectrode with Tapered Structure in Micro-EDM to Eliminate the Step Effect on the 3D Microstructure’s Surface." Micromachines 11, no. 3 (March 24, 2020): 335. http://dx.doi.org/10.3390/mi11030335.
Повний текст джерелаPancholi, V., A. Raja, and K. Rohit. "Deformation Behavior of Inhomogeneous Layered Microstructure." Materials Science Forum 879 (November 2016): 1437–42. http://dx.doi.org/10.4028/www.scientific.net/msf.879.1437.
Повний текст джерелаKawa, Marek. "Failure Criterion for Brick Masonry: A Micro-Mechanics Approach." Studia Geotechnica et Mechanica 36, no. 3 (February 28, 2015): 37–48. http://dx.doi.org/10.2478/sgem-2014-0025.
Повний текст джерелаPark, C. H., Young Gun Ko, Chong Soo Lee, Kyung Tae Park, Dong Hyuk Shin, and Ho Sung Lee. "High-Temperature Deformation Behavior of ELI Grade Ti-6Al-4V Alloy with Martensite Microstructure." Materials Science Forum 551-552 (July 2007): 365–72. http://dx.doi.org/10.4028/www.scientific.net/msf.551-552.365.
Повний текст джерелаZhang, Yaodan, Zhijun Li, Yuanren Xiu, Chunjiang Li, Baosen Zhang, and Yu Deng. "Microstructural Characteristics of Frazil Particles and the Physical Properties of Frazil Ice in the Yellow River, China." Crystals 11, no. 6 (May 31, 2021): 617. http://dx.doi.org/10.3390/cryst11060617.
Повний текст джерелаMuiruri, Amos, Maina Maringa, and Willie du Preez. "Validation of a Microstructure-Based Model for Predicting the High Strain Rate Flow Properties of Various Forms of Additively Manufactured Ti6Al4V(ELI) Alloy." Metals 11, no. 10 (October 13, 2021): 1628. http://dx.doi.org/10.3390/met11101628.
Повний текст джерела