Готові списки джерел за темами / MICROSTRIP LINE COUPLER

Добірка наукової літератури з теми "MICROSTRIP LINE COUPLER"

Автор: Grafiati
Опубліковано: 11 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "MICROSTRIP LINE COUPLER".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "MICROSTRIP LINE COUPLER"

1

Shimasaki, Hitoshi, and Makoto Tsutsumi. "Light-controlled microstrip line coupler." International Journal of Infrared and Millimeter Waves 10, no. 9 (September 1989): 1131–38. http://dx.doi.org/10.1007/bf01010371.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Nasr, Abdelhamid M. H., and Amr M. E. Safwat. "Tightly Coupled Directional Coupler Using Slotted-Microstrip Line." IEEE Transactions on Microwave Theory and Techniques 66, no. 10 (October 2018): 4462–70. http://dx.doi.org/10.1109/tmtt.2018.2847696.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Jogiraju, G. V., and V. M. Pandharipande. "Stripline to microstrip line aperture coupler." IEEE Transactions on Microwave Theory and Techniques 38, no. 4 (April 1990): 440–43. http://dx.doi.org/10.1109/22.52589.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Yahya, Salah I., Farid Zubir, Leila Nouri, Fawwaz Hazzazi, Zubaida Yusoff, Muhammad Akmal Chaudhary, Maher Assaad, Abbas Rezaei, and Binh Nguyen Le. "A Balanced Symmetrical Branch-Line Microstrip Coupler for 5G Applications." Symmetry 15, no. 8 (August 17, 2023): 1598. http://dx.doi.org/10.3390/sym15081598.

Повний текст джерела
Анотація:
Symmetry in designing a microstrip coupler is crucial because it ensures balanced power division and minimizes unwanted coupling between the coupled lines. In this paper, a filtering branch-line coupler (BLC) with a simple symmetrical microstrip structure was designed, analyzed and fabricated. Based on a mathematical design procedure, the operating frequency was set at 5.2 GHz for WLAN and 5G applications. Moreover, an optimization method was used to improve the performance of the proposed design. It occupied an area of 83.2 mm2. Its harmonics were suppressed up to 15.5 GHz with a maximum level of −15 dB. Meanwhile, the isolation was better than −28 dB. Another advantage of this design was its high phase balance, where the phase difference between its output ports was 270° ± 0.1°. To verify the design method and simulation results, the proposed coupler was fabricated and measured. The results show that all the simulation, design methods, and experimental results are in good agreement. Therefore, the proposed design can be easily used in designing high-performance microstrip-based communication systems.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Alhalabi, H., H. Issa, E. Pistono, D. Kaddour, F. Podevin, A. Baheti, S. Abouchahine, and P. Ferrari. "Miniaturized branch-line coupler based on slow-wave microstrip lines." International Journal of Microwave and Wireless Technologies 10, no. 10 (August 22, 2018): 1103–6. http://dx.doi.org/10.1017/s1759078718001204.

Повний текст джерела
Анотація:
AbstractThis paper presents a miniaturized 3-dB branch-line coupler based on slow-wave microstrip transmission lines. The miniaturized coupler operating at 2.45 GHz is designed and implemented on a double-layer printed circuit board substrate with blind metallic vias embedded in the lower substrate layer providing the slow-wave effect. Based on this concept, a 43% size miniaturization is achieved as compared with a classical microstrip branch-line coupler prototype. The measured S parameters present a return loss of 25.5 dB and an average insertion loss equal to 0.05 dB at the operating frequency.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Islam, R., and G. V. Eleftheriades. "Review of the microstrip/negative-refractive-index transmission-line coupled-line coupler." IET Microwaves, Antennas & Propagation 6, no. 1 (2012): 31. http://dx.doi.org/10.1049/iet-map.2011.0225.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Nosrati, Mehdi. "An extremely miniaturized microstrip branch-line coupler." Microwave and Optical Technology Letters 51, no. 6 (June 2009): 1403–6. http://dx.doi.org/10.1002/mop.24365.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Wu, Yongle, Weinong Sun, Sai-Wing Leung, Yinliang Diao, Kwok-Hung Chan, and Yun-Ming Siu. "Single-Layer Microstrip High-Directivity Coupled-Line Coupler With Tight Coupling." IEEE Transactions on Microwave Theory and Techniques 61, no. 2 (February 2013): 746–53. http://dx.doi.org/10.1109/tmtt.2012.2235855.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Kingsly, Saffrine, Sangeetha Velan, Malathi Kanagasabai, Sangeetha Subbaraj, Yogeshwari Panneer Selvam, and Bhuvaneswari Balasubramaniyan. "Signal integrity analysis on a microstrip ultra-wideband coupled-line coupler." International Journal of Electronics 106, no. 4 (December 17, 2018): 620–33. http://dx.doi.org/10.1080/00207217.2018.1545262.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Kim, Seong‐Jin, and Moon‐Que Lee. "Three‐line microstrip directional coupler with high directivity." Microwave and Optical Technology Letters 64, no. 2 (October 18, 2021): 213–17. http://dx.doi.org/10.1002/mop.33070.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "MICROSTRIP LINE COUPLER"

1

Al, Shamaileh Khair Ayman. "Realization of Miniaturized Multi-/Wideband Microwave Front-Ends." University of Toledo / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1437222522.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Wimberley, Jack Timpson. "Behavior of Periodic Coupled Microstrip Resonators." Thesis, Boston College, 2011. http://hdl.handle.net/2345/1983.

Повний текст джерела
Анотація:
Thesis advisor: Krzysztof Kempa
The resonant modes of a sequence of periodically spaced microstrip resonators is studied. The system is analyzed as transmission line with periodic capacitive gaps, as a waveguide with apertures via normal mode expansion, and through a derivation of the static fields in the gap between two microstrip resonators via conformal mapping. FDTD simulations are also performed to numerically calculate the resonant modes of the sequence and also its absorption spectrum when it contains a lossy dielectric. It is found, as expected, that when the gap size is large, the microstrip resonators are uncoupled and there resonant modes are unperturbed. As the gap size narrows, the resonators become strongly coupled, and changing boundary conditions perturb the resonant modes upwards in frequency. Moreover, an additional resonant mode is observed that does not correspond to any uncoupled mode
Thesis (BS) — Boston College, 2011
Submitted to: Boston College. College of Arts and Sciences
Discipline: College Honors Program
Discipline: Physics Honors Program
Discipline: Physics
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ozkal, Piroglu Sefika. "Analysis Of Coupled Lines In Microwave Printed Circuit Elements." Master's thesis, METU, 2007. http://etd.lib.metu.edu.tr/upload/2/12609047/index.pdf.

Повний текст джерела
Анотація:
Full wave analysis of microstrip lines at microwave frequencies is performed by using method of moments in conjunction with closed-form spatial domain Green&rsquo
s functions. The Green&rsquo
s functions are in general Sommerfeld-type integrals which are computationally expensive. To improve the efficiency of the technique, Green&rsquo
s functions are approximated by their closed-forms. Microstrip lines are excited by arbitrarily located current sources and are terminated by complex loads at both ends. Current distributions over microstrip lines are represented by rooftop basis functions. At first step, the current distribution over a single microstrip line is calculated. Next, the calculation of the current distributions over coupled microstrip lines is performed. The technique is then, applied to directional couplers. Using the current distributions obtained by the analysis, the scattering parameters of the structures are evaluated by using Prony&rsquo
s method. The results are compared with the ones gathered by using simulation software tools, CNL/2&trade
and Agilent Advanced Design System&trade
(ADS).
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Apaydin, Nil. "Novel Implementations of Coupled Microstrip Lines on Magnetic Substrates." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1373897365.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Uzelac, Lawrence Stevan. "A Multiple Coupled Microstrip Transmission Line Model for High-Speed VLSI Interconnect Simulation." PDXScholar, 1991. https://pdxscholar.library.pdx.edu/open_access_etds/4526.

Повний текст джерела
Анотація:
A model is presented which incorporates the advantages of a mixed mode simulation to characterize transmission line behavior in multiple coupled Transmission line systems. The model is intended for use by digital circuit designers who wish to be able to obtain accurate transmission line behavior for complex digital systems for which continuous time simulation tools such as SPICE would time prohibitive. The model uses a transverse electromagnetic wave approximation to obtain solutions to the basic transmission line equations. A modal analysis technique is used to solve for the attenuation and propagation constants for the transmission lines. Modal analysis done in the frequency domain after a Fast Fourier Transform of the time-domain input signals. Boundary conditions are obtained from the Thevinized transmission line input equivalent circuit and the transmission line output load impedance. The model uses a unique solution queue system that allows n-line coupled transmission lines to be solved without resorting to large order matrix methods or the need to diagonals larger matrices using linear transformations. This solution queue system is based on the method of solution superposition. As a result, the CPU time required for the model is primarily a function of the number of transitions and not the number of lines modeled. Incorporation of the model into event driven circuit simulators such as Network C is discussed. It will be shown that the solution queue methods used in this model make it ideally suited for incorporation into a event-driven simulation network. The model presented in this thesis can be scaled to incorporate direct electromagnetic coupling between first, second, or third lines adjacent to the line transitioning. It is shown that modeling strictly adjacent line coupling is adequate for typical digital technologies. It is shown that the model accurately reproduces the transmission line behavior of systems modeled by previous authors. Example transitions on a 8-line system are reviewed. Finally, future model improvements are discussed.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Chiang, Chun Pong. "Design of quasi-elliptic microstrip bandpass filter using terminated anti-parallel coupled-line structure." Thesis, University of Macau, 2007. http://umaclib3.umac.mo/record=b1937941.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Hong, Sio Ian. "The microstrip parallel coupled-line bandpass filter with simultaneous dual-band response and bandwidth enhancement." Thesis, University of Macau, 2009. http://umaclib3.umac.mo/record=b2119530.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

POMPEI, DOMINIQUE. "Caracterisation et selection des modes de propagation dans les lignes microondes : generalisation du formalisme quasi-tem, utilisation des techniques de traitement du signal dans la methode tlm." Nice, 1987. http://www.theses.fr/1987NICE4123.

Повний текст джерела
Анотація:
On developpe en 1ere partie un formalisme matriciel pour n lignes microbandes couplees dans le cas du mode quasi tem afin de pouvoir caracteriser leurs proprietes. En seconde partie on developpe des techniques de simulation et de filtrage en frequence pour selectionner les multiples modes generes. Autre que le quasi tem, on retient la technique de simulation tlm (transmission line matrix) apres avoir reduit le temps de calcul et l'occupation memoire. Pour le filtrage de mode, c'est au niveau du traitement du signal que l'apport est fait. Toutes ces techniques permettent d'etudier des structures multilignes et d'avoir acces aux caracteristiques de rayonnement des antennes imprimees
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Rodríguez, Cepeda Juan Pablo. "Modelatge multimodal de transicions i asimetries en línies three-line-microstrip." Doctoral thesis, Universitat Ramon Llull, 2010. http://hdl.handle.net/10803/9142.

Повний текст джерела
Анотація:
Una línia de transmissió three-line-microstrip consisteix en tres pistes paral·leles practicades sobre la cara d'un dielèctric amb un pla de massa inferior. La propagació en aquesta línia es pot descriure en termes de tres modes fonamentals anomenats ee, oo i oe. Tot i que aquests modes són ortogonals interaccionen entre sí a qualsevol transició, discontinuïtat o asimetria. En el pla d'una transició o asimetria es genera un intercanvi d'energia o conversió modal en el que prenen part tots els modes.
En aquest treball s'analitza la conversió modal que s'origina en un conjunt de transicions i asimetries construïdes sobre línies three-line-microstrip. L'estudi es realitza aplicant la tècnica de l'anàlisi multimodal. L'ús d'aquesta tècnica permet la deducció d'una sèrie de models multimodals (un per a cada transició) que proporcionen una anàlisi simple, rigorosa i quantitativa d'aquest fenomen.
La validesa d'aquest estudi es verifica de manera experimental. Els bons resultats obtinguts demostren que els models multimodals proposats prediuen de manera precisa el comportament de les transicions. Aquest fet permet el seu ús per analitzar circuits o estructures constituïts per trams de tres pistes acoblades. En el cas d'aquesta tesi, han estat aplicats als camps de l'EMC i de les microones. Pel que fa a l'EMC, s'ha realitzat un estudi de l'acoblament i la integritat del senyal en configuracions de PCB amb trams de tres pistes acoblades. Aquest estudi ha permès identificar les transicions i asimetries en aquests circuits com a possibles fonts d'interferència i de degradació dels senyals ja que la conversió modal es pot interpretar com a un procés d'interferència que involucra tots els senyals presents. Pel que fa a les microones, s'ha realitzat una anàlisi multimodal de filtres spurline. Aquesta anàlisi ha permès desenvolupar dues noves estructures, la principal característica de les quals és la seva compacitat que, a diferència d'altres estructures similars, s'aconsegueix permetent la presència d'un nou mode en el procés de ressonància. L'ús dels models multimodals per a l'anàlisi d'aquestes estructures ha permès una interpretació clara i senzilla del seu funcionament així com el desenvolupament d'una sèrie de regles de disseny que permeten un ajust fàcil i ràpid de certs paràmetres dels filtres com ara la freqüència central i l'ample de banda.
Una línea de transmisión three-line-microstrip consiste en tres pistas paralelas practicadas sobre la cara de un dieléctrico con un plano de masa inferior. La propagación en esta línea se puede describir en términos de tres modos fundamentales llamados ee, oo i oe. Aunque estos modos son ortogonales interaccionan entre se en cualquier transición, discontinuidad o asimetría. En el plano de una transición o asimetría se genera un intercambio de energía o conversión modal en el que toman parte todos los modos.
En este trabajo se analiza la conversión modal que se origina en un conjunto de transiciones i asimetrías construidas sobre líneas three-line-microstrip. El estudio se realiza aplicando la técnica del análisis multimodal. El uso de esta técnica permite la deducción de una serie de modelos multimodales (un per a cada transición) que proporcionan un análisis simple, riguroso i cuantitativo de este fenómeno.
La validez de este estudio se verifica de manera experimental. Los buenos resultados obtenidos demuestran que los modelos multimodales propuestos predicen de manera precisa el comportamiento de las transiciones. Este hecho permite su uso para analizar circuitos o estructuras constituidos por tramos de tres pistas acopladas. En esta tesis doctoral, han sido aplicados a los campos de la EMC i de las microondas. En el primero de ellos, se ha realizado un estudio del acoplamiento y la integridad de la señal en configuraciones de PCB con tramos de tres pistas acopladas. Este estudio ha permitido identificar las transiciones y asimetrías en estos circuitos como posibles fuentes de interferencia y de degradación de las señales ya que la conversión modal se puede interpretar como a un proceso de interferencia que involucra todas las señales presentes. En el campo de las microondas, se ha realizado un análisis multimodal de filtros spurline. Este análisis ha permitido desarrollar dos nuevas estructuras, cuya principal característica es su compacidad que, a diferencia de otras estructuras similares, se consigue permitiendo la presencia de un nuevo modo en el proceso de resonancia. El uso de los modelos multimodales para el análisis de estas estructuras ha permitido una interpretación clara i sencilla del su funcionamiento así como el desarrollo de una serie de reglas de diseño que permiten un ajuste fácil i rápido de ciertos parámetros de los filtros como por ejemplo la frecuencia central y el ancho de banda.
A three-line-microstrip transmission line consists of three parallel coupled strips printed on a grounded dielectric substrate. The propagation in this line can be described in terms of three fundamental modes, namely the ee, oo and oe modes. These modes are orthogonal and propagate independently unless a transition or asymmetry is present in the line. Any transition or asymmetry will generate an energy exchange or modal interaction among all the propagating modes.
In this work, the modal interaction of a set of transitions and asymmetries in three-line-microstrip transmission lines is analyzed. The study is carried out by using the multimodal analysis. By means of this technique a set of multimodal circuit models (one for each transition) is derived. These models provide a simple and a quantitative interpretation of the modal interaction.
The proposed multimodal analysis is experimentally validated. The obtained results show that the derived multimodal models accurately predict the behavior of the transitions. Due to this fact, they can be used for the analysis of circuits and structures composed of three-coupled-strip sections. In this work, the models have been applied to both the EMC and microwave fields. In the former, they have been employed to study the cross-talk and signal-integrity problems in PCB configurations involving tree-coupled-trace sections. The performed analysis has shown that transitions and asymmetries in these circuits must be considered as a source of interference and signal degradation since the modal interaction can be interpreted as an interference process that involves all the present signals. In the latter, a multimodal analysis of spurline filters has been performed. This study has allowed the derivation of two new filter structures whose main feature is their compactness, which, in contrast to other analogous filters, is achieved by allowing the presence of an additional mode in the resonance process. The use of the multimodal models for the analysis of these structures has permitted both a simple interpretation of the filter operation and the derivation of a set of design rules which allows a rapid fine tuning of some filter parameters such as the center frequency and the bandwidth.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Pajares, Vega Francisco Javier. "Modelatge multimodal de transicions en entorn microstrip." Doctoral thesis, Universitat Ramon Llull, 2007. http://hdl.handle.net/10803/9134.

Повний текст джерела
Анотація:
Avui dia cada vegada s'ha de tenir més en compte com es realitza el traçat de pistes en les plaques de circuit imprès (PCB). Això és degut a que cada vegada més hi viatgen senyals amb components freqüencials més elevades. Per tant, paràmetres com la desadaptació per impedància característica, acoblaments, ressonàncies i comportaments complexes de les transicions que es troben els senyals en la seva propagació per les pistes, han de ser considerats per evitar problemes d'integritat del senyal i garantir la compatibilitat electromagnètica (EMC) amb el seu entorn.
El present treball de tesi s'ha centrat en l'estudi del comportament d'una situació particular, però molt habitual, de pistes: dues pistes sobre un pla de massa, formant el que es coneix com una línia de transmissió microstrip acoblada. Els senyals que viatgen a través d'una línia microstrip acoblada es poden descompondre en dos modes bàsics de propagació: mode comú (on la tensió està definida entre el pla de massa i cada pista) i el mode diferencial (on la tensió està definida entre les pistes). Aquesta descomposició és molt habitual en el món de la compatibilitat electromagnètica ja que les tècniques de filtratge de les interferències varien depenent si aquestes viatgen en mode comú o en mode diferencial.
El treball desenvolupat s'ha focalitzat en l'estudi, des d'aquest punt de vista multimodal (que té en compte simultàniament tant el mode comú com el diferencial), de les diferents transicions que es pot trobar el senyal en la seva propagació degut al traçat de pistes. Com a resultat d'aquest estudi s'han obtingut uns models circuitals que permeten l'anàlisi i simulació dels diferents modes que intervenen i que han estat validats de forma experimental. Aquest fet ha permès l'ús d'aquests models en l'anàlisi de problemes d'integritat del senyal que són comuns en el entorn de la compatibilitat electromagnètica (EMC). Els resultats obtinguts han estat presentats en congressos nacionals i internacionals.
Hoy en día cada vez se debe tener más en cuenta como se realiza el trazado de pistas en las placas de circuito impreso (PCB). Esto es así debido a que cada vez más viajan por ellas señales con componentes frecuenciales más elevadas. Por lo tanto, parámetros como la desadaptación por impedancia característica, acoplamientos, resonancias y comportamientos complejos de las transiciones que se encuentran las señales mientras se propagan por las pistas, deben ser tenidos en consideración para evitar problemas de integridad de la señal y garantizar la compatibilidad electromagnética (EMC) con su entorno.
En el presente trabajo de tesis se ha centrado en el estudio del comportamiento de una situación particular, pero habitual, de pistas: dos pistas sobre un plano de masa, formando lo que se conoce como línea de transmisión microstrip acoplada. Las señales que viajan a través de una línea microstrip acoplada se pueden descomponer en dos modos básicos de propagación: modo común (donde la tensión está definida entre el plano de masa y cada pista) y modo diferencial (donde la tensión está definida entre pistas). Esta descomposición es muy habitual en el mundo de la compatibilidad electromagnética ya que las técnicas de filtrado de las interferencias varían dependiendo si estas viajan en modo común o en modo diferencial.
El trabajo desarrollado se ha focalizado en el estudio, desde este punto de vista multimodal (que tiene en cuenta simultáneamente tanto el modo común como el diferencial), de las diferentes transiciones que puede encontrarse la señal durante su propagación debido al trazado de pistas. Como resultado se han obtenido unos modelos circuitales que permiten el análisis y simulación de los diferentes modos que intervienen y que han sido validados de forma experimental. Este hecho ha permitido el uso de dichos modelos en el análisis de problemas de integridad de la señal que son comunes en el entorno de la compatibilidad electromagnética (EMC). Los resultados obtenidos han sido mostrados en congresos nacionales e internacionales.
Nowadays, the placement of the strips in a printed circuit board (PCB) has to be performed with increasing care, because of the rise of the spectral content of the signals propagating through the strips. Due to this fact, mismatches of the characteristic impedances, crosstalks, resonances and complex behavior of the transitions that the signals may encounter in their propagation have to be considered in order to avoid signal integrity problems and to guarantee the electromagnetic compatibility with their environment.
This work is focused on the study of the behavior of a particular, but also a very common way of routing strips: two close strips above a ground plane, forming a extit{coupled microstrip transmission line}. The signals present at this transmission line can be decomposed into two basic signals known as common mode (where its voltage is defined between the ground plane and each strip) and differential mode (where its voltage is defined between the two strips). This decomposition is often found in electromagnetic compatibility because the different techniques of filtering interferences depend on their main mode of propagation.
The study carried out in this thesis is focused on the analysis from a multimodal point of view of different transitions that signals encounter during their propagation in a coupled microstrip transmission line.
As a result of this analysis, a number of circuit models for different transitions have been obtained and experimentally validated. These models have been used to successfully study signal integrity problems found in EMC and they have been presented in national and international symposiums.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "MICROSTRIP LINE COUPLER"

1

Uysal, Sener. Nonuniform line microstrip directional couplers and filters. Boston: Artech House, 1993.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kim, Yoonsuk. Characterization of coupled microstrip structure using FDTD. 1999.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Bahl, I. J. RF and Microwave Coupled-Line Circuits. 2nd ed. Artech House Publishers, 1999.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Bahl, I. J., R. K. Mongia, J. Hong, and P. Bhartia. RF and Microwave Coupled-Line Circuits. 2nd ed. Artech House Publishers, 2007.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

RF and microwave coupled-line circuits. 2nd ed. Norwood, MA: Artech House, 2007.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Hayden, Leonard A. Nonuniformly coupled microstrip transversal filters for analog signal processing. 1989.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Negative Group Delay Devices: From Concepts to Applications. Institution of Engineering & Technology, 2018.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "MICROSTRIP LINE COUPLER"

1

Devi, Thiyam Romila, Satyabrata Maiti, Abhishek Jena, and Amlan Datta. "Design of Microstrip Branch Line Coupler Phase Shifter in L-Band." In Advances in Intelligent Systems and Computing, 237–45. New Delhi: Springer India, 2014. http://dx.doi.org/10.1007/978-81-322-2009-1_28.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Reddy, Annapureddy Venkata, and V. G. Borkar. "Design and Simulation of Microstrip Branch Line Coupler and Monopulse Comparator for Airborne Radar Applications." In Learning and Analytics in Intelligent Systems, 10–18. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-24318-0_2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Edwards, T. C., and M. B. Steer. "Parallel-Coupled Lines and Directional Couplers." In Foundations of Interconnect and Microstrip Design, 269–314. West Sussex, England: John Wiley & Sons, Ltd, 2013. http://dx.doi.org/10.1002/9781118894514.ch8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Deshmukh, Sanjay B., and Amit A. Deshmukh. "Microstrip-Line Resonator-Fed Rectangular Microstrip Antenna Using Gap-Coupled Parasitic Semi-circular Shape Patches." In Lecture Notes on Data Engineering and Communications Technologies, 109–18. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-6601-8_10.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Gurwinder Singh, Rajni, and Anupma Marwaha. "Frequency Switching in Coupled Microstrip Line Loaded with Split-Ring Resonator." In Proceedings of the International Conference on Recent Cognizance in Wireless Communication & Image Processing, 573–80. New Delhi: Springer India, 2016. http://dx.doi.org/10.1007/978-81-322-2638-3_64.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ravelo, Blaise. "Cartographical Analyses of Reflection and Transmission Coefficients of Shunt Coupled Lines." In Analytical Methodology of Tree Microstrip Interconnects Modelling For Signal Distribution, 167–89. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0552-2_9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Deshmukh, Sanjay B., and Amit A. Deshmukh. "Microstrip-Line Resonator-Fed Equilateral Triangular Antenna Using Gap-Coupled Parasitic Triangular Shape Patches." In Lecture Notes on Data Engineering and Communications Technologies, 119–28. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-16-6601-8_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Zebiri, Chemseddine, Djamel Sayad, Fatiha Benabelaziz, Mohamed Lashab, and Ammar Ali. "Impact of Microstrip-Line Defected Ground Plane on Aperture-Coupled Asymmetric DRA for Ultra-Wideband Applications." In Antenna Fundamentals for Legacy Mobile Applications and Beyond, 101–18. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-63967-3_5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Yusuf, Shamsuddeen, Shuaibu Musa Adam, Adamu Idris, David Afolabi, Vijayakumar Nanjappan, and Ka Lok Man. "Design and Simulation of 2.4 GHz Microstrip Parallel Coupled Line Low Pass Filter for Wireless Communication System." In Innovations in Bio-Inspired Computing and Applications, 362–70. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-96299-9_35.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Viswanadha, Karteek, and N. S. Raghava. "Design of a Narrow-Band Pass Asymmetric Microstrip Coupled-Line Filter with Distributed Amplifiers at 5.5 GHz for WLAN Applications." In Advances in Intelligent Systems and Computing, 181–87. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-1822-1_17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "MICROSTRIP LINE COUPLER"

1

Shimasaki, Hitoshi, and Makoto Tsutsumi. "Light-Controlled Microstrip Line Coupler." In 13 Intl Conf on Infrared and Millimeter Waves, edited by Richard J. Temkin. SPIE, 1988. http://dx.doi.org/10.1117/12.978352.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Wu, Xiaoqing, and Lin-Ping Shen. "Compact Ultra-Wideband Microstrip 3dB Branch-Line Coupler Using Coupled-Lines." In 2022 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (AP-S/USNC-URSI). IEEE, 2022. http://dx.doi.org/10.1109/ap-s/usnc-ursi47032.2022.9886053.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Ashmi Chakraborty Das, Lakhindar Murmu, and Santanu Dwari. "A compact branch-line coupler using folded microstrip lines." In 2013 International Conference on Microwave and Photonics (ICMAP). IEEE, 2013. http://dx.doi.org/10.1109/icmap.2013.6733485.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Wu, Xiaoqing, and Lin-Ping Shen. "A Miniaturized Microstrip Branch-Line Hybrid Coupler Using Two Sections and Coupled-Lines." In 2021 IEEE International Symposium on Antennas and Propagation and USNC-URSI Radio Science Meeting (APS/URSI). IEEE, 2021. http://dx.doi.org/10.1109/aps/ursi47566.2021.9703777.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Lee, H. M. "Switchable feed network using microstrip/negative-refractive-index coupled-line coupler." In 2011 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science Meeting. IEEE, 2011. http://dx.doi.org/10.1109/aps.2011.5996820.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sorocki, Jakub, Ilona Piekarz, Slawomir Gruszczynski, and Krzysztof Wincza. "Compact microstrip coupled-line directional coupler realized in thick-film technology." In 2016 9th International Kharkiv Symposium on Physics and Engineering of Microwaves, Millimeter and Submillimeter Waves (MSMW). IEEE, 2016. http://dx.doi.org/10.1109/msmw.2016.7538005.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Omam, Zahra Rahimian, Vahid Nayyeri, and Omar M. Ramahi. "Microstrip Coupled-Line Directional Coupler for High-Sensitivity Dielectric Constant Measurement." In 2021 51st European Microwave Conference (EuMC). IEEE, 2022. http://dx.doi.org/10.23919/eumc50147.2022.9784364.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Letavin, Denis A. "Compact Dual-Frequency Microstrip Branch-Line Coupler Using Artificial Transmission Lines." In 2018 19th International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices (EDM). IEEE, 2018. http://dx.doi.org/10.1109/edm.2018.8434988.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Bulus, Umut. "Microstrip Coupled Line Directional Coupler Design via Block-Based Microwave Training Kit." In 2023 17th European Conference on Antennas and Propagation (EuCAP). IEEE, 2023. http://dx.doi.org/10.23919/eucap57121.2023.10133727.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Nguyen, Hoang, and Christophe Caloz. "Simple-Design and Compact MIM CRLH Microstrip 3-dB Coupled-Line Coupler." In 2006 IEEE MTT-S International Microwave Symposium Digest. IEEE, 2006. http://dx.doi.org/10.1109/mwsym.2006.249715.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "MICROSTRIP LINE COUPLER"

1

Uzelac, Lawrence. A Multiple Coupled Microstrip Transmission Line Model for High-Speed VLSI Interconnect Simulation. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.6410.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "MICROSTRIP LINE COUPLER" для конкретних типів джерел:
Статті в журналах Дисертації
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії