Статті в журналах з теми "Microelectromechanical systems – Micromachining"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-48 статей у журналах для дослідження на тему "Microelectromechanical systems – Micromachining".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Bhat, K. N. "Micromachining for Microelectromechanical Systems." Defence Science Journal 48, no. 1 (January 1, 1998): 5–19. http://dx.doi.org/10.14429/dsj.48.3863.
Повний текст джерелаBustillo, J. M., R. T. Howe, and R. S. Muller. "Surface micromachining for microelectromechanical systems." Proceedings of the IEEE 86, no. 8 (1998): 1552–74. http://dx.doi.org/10.1109/5.704260.
Повний текст джерелаEsashi, Masayoshi. "Micromachine. Microelectromechanical Systems by Silicon Micromachining." Journal of the Institute of Television Engineers of Japan 50, no. 8 (1996): 1046–53. http://dx.doi.org/10.3169/itej1978.50.1046.
Повний текст джерелаKota, S., G. K. Ananthasuresh, S. B. Crary, and K. D. Wise. "Design and Fabrication of Microelectromechanical Systems." Journal of Mechanical Design 116, no. 4 (December 1, 1994): 1081–88. http://dx.doi.org/10.1115/1.2919490.
Повний текст джерелаMehregany, Mehran, and Christian A. Zorman. "Surface Micromachining: A Brief Introduction." MRS Bulletin 26, no. 4 (April 2001): 289–90. http://dx.doi.org/10.1557/mrs2001.61.
Повний текст джерелаChircov, Cristina, and Alexandru Mihai Grumezescu. "Microelectromechanical Systems (MEMS) for Biomedical Applications." Micromachines 13, no. 2 (January 22, 2022): 164. http://dx.doi.org/10.3390/mi13020164.
Повний текст джерелаErmolov, Vladimir, Antti Lamminen, Jaakko Saarilahti, Ben Wälchli, Mikko Kantanen, and Pekka Pursula. "Micromachining integration platform for sub-terahertz and terahertz systems." International Journal of Microwave and Wireless Technologies 10, no. 5-6 (April 10, 2018): 651–59. http://dx.doi.org/10.1017/s175907871800048x.
Повний текст джерелаTao, Kai, Gui Fu Ding, Zhuo Qing Yang, Yan Wang, and Pei Hong Wang. "Fabrication and Characterization of Bonded NdFeB Microstructures for Microelectromechanical Systems Applications." Advanced Materials Research 211-212 (February 2011): 561–64. http://dx.doi.org/10.4028/www.scientific.net/amr.211-212.561.
Повний текст джерелаRamesham, Rajeshuni. "Fabrication of diamond microstructures for microelectromechanical systems (MEMS) by a surface micromachining process." Thin Solid Films 340, no. 1-2 (February 1999): 1–6. http://dx.doi.org/10.1016/s0040-6090(98)01370-4.
Повний текст джерелаBallarini, R., R. L. Mullen, Y. Yin, H. Kahn, S. Stemmer, and A. H. Heuer. "The Fracture Toughness of Polysilicon Microdevices: A First Report." Journal of Materials Research 12, no. 4 (April 1997): 915–22. http://dx.doi.org/10.1557/jmr.1997.0131.
Повний текст джерелаBeeby, S. P., A. Blackburn, and N. M. White. "Silicon micromachining processes combined with thick-film printed lead zirconate titanate actuators for microelectromechanical systems." Materials Letters 40, no. 4 (August 1999): 187–91. http://dx.doi.org/10.1016/s0167-577x(99)00073-7.
Повний текст джерелаLusk, Craig P., and Larry L. Howell. "Design Space of Single-Loop Planar Folded Micro Mechanisms With Out-of-Plane Motion." Journal of Mechanical Design 128, no. 5 (November 3, 2005): 1092–100. http://dx.doi.org/10.1115/1.2216734.
Повний текст джерелаChen, Tao, Li Guo Chen, Ming Qiang Pan, and Li Ning Sun. "Study on MEMS Microgripper Integrated Vacuum Tool." Applied Mechanics and Materials 43 (December 2010): 471–75. http://dx.doi.org/10.4028/www.scientific.net/amm.43.471.
Повний текст джерелаLi, Jing Feng, Song Zhe Jin, and Yong Li. "Fabrication of Si3N4 Micro-Components by a Combined Microfabrication Process." Key Engineering Materials 287 (June 2005): 28–32. http://dx.doi.org/10.4028/www.scientific.net/kem.287.28.
Повний текст джерелаKIM, JAE-HYUN, HAK-JOO LEE, SEUNG-WOO HAN, JUNG-YUP KIM, JUNG-SIL KIM, JAE-YOON KANG, SUNG-HOON CHOA, and CHANG-SEUNG LEE. "MECHANICAL BEHAVIOR OF FREESTANDING Mo THIN FILMS FOR RF–MEMS DEVICES." International Journal of Modern Physics B 20, no. 25n27 (October 30, 2006): 3757–62. http://dx.doi.org/10.1142/s0217979206040325.
Повний текст джерелаNanver, Lis K., Tihomir Knezevic, Xingyu Liu, Shivakumar D. Thammaiah, and Max Krakers. "On the Many Applications of Nanometer-Thin Pure Boron Layers in IC and Microelectromechanical Systems Technology." Journal of Nanoscience and Nanotechnology 21, no. 4 (April 1, 2021): 2472–82. http://dx.doi.org/10.1166/jnn.2021.19112.
Повний текст джерелаDroogendijk, H., M. J. de Boer, R. G. P. Sanders, and G. J. M. Krijnen. "A biomimetic accelerometer inspired by the cricket's clavate hair." Journal of The Royal Society Interface 11, no. 97 (August 6, 2014): 20140438. http://dx.doi.org/10.1098/rsif.2014.0438.
Повний текст джерелаSano, Chikako, Manabu Ataka, Gen Hashiguchi, and Hiroshi Toshiyoshi. "An Electret-Augmented Low-Voltage MEMS Electrostatic Out-of-Plane Actuator for Acoustic Transducer Applications." Micromachines 11, no. 3 (March 4, 2020): 267. http://dx.doi.org/10.3390/mi11030267.
Повний текст джерелаShetty, A., and G. Srinivasan. "MICROFABRICATED ORAL DRUG DELIVERY SYSTEMS." INDIAN DRUGS 52, no. 11 (November 28, 2015): 5–13. http://dx.doi.org/10.53879/id.52.11.10393.
Повний текст джерелаBen Messaoud, Jaweb, Jean-François Michaud, Dominique Certon, Massimo Camarda, Nicolò Piluso, Laurent Colin, Flavien Barcella, and Daniel Alquier. "Investigation of the Young’s Modulus and the Residual Stress of 4H-SiC Circular Membranes on 4H-SiC Substrates." Micromachines 10, no. 12 (November 21, 2019): 801. http://dx.doi.org/10.3390/mi10120801.
Повний текст джерелаChang, Yunxia, Qichang Zhang, Wei Wang, and Jianxin Han. "Mechanical Behaviors of Electrostatic Microbeams with Nonideal Supports." Shock and Vibration 2020 (August 17, 2020): 1–18. http://dx.doi.org/10.1155/2020/4507280.
Повний текст джерелаMaboudian, Roya. "Adhesion and Friction Issues Associated With Reliable Operation of MEMS." MRS Bulletin 23, no. 6 (June 1998): 47–51. http://dx.doi.org/10.1557/s0883769400030633.
Повний текст джерелаGe, Chang, and Edmond Cretu. "A Polymeric Piezoelectric Tactile Sensor Fabricated by 3D Printing and Laser Micromachining for Hardness Differentiation during Palpation." Micromachines 13, no. 12 (December 7, 2022): 2164. http://dx.doi.org/10.3390/mi13122164.
Повний текст джерелаBai, Yufang, Jie Zeng, Jiwei Huang, Shaolong Zhong, Zhuming Cheng, and Dakai Liang. "Measurement of Structural Loads Using a Novel MEMS Extrinsic Fabry–Perot Strain Sensor." Applied Sciences 10, no. 1 (December 18, 2019): 18. http://dx.doi.org/10.3390/app10010018.
Повний текст джерелаBajwa, Rayan, and Murat Kaya Yapici. "Integrated On-Chip Transformers: Recent Progress in the Design, Layout, Modeling and Fabrication." Sensors 19, no. 16 (August 13, 2019): 3535. http://dx.doi.org/10.3390/s19163535.
Повний текст джерелаKim, Jong Jin, Dong Il Son, and Dong Il Kwon. "Analysis of Time-Dependent Degradation of a Micro-Resonating Structure with a Notch." Key Engineering Materials 297-300 (November 2005): 594–602. http://dx.doi.org/10.4028/www.scientific.net/kem.297-300.594.
Повний текст джерелаKumar, A. Sravan, Sankha Deb, and S. Paul. "Burr removal from high-aspect-ratio micro-pillars using ultrasonic-assisted abrasive micro-deburring." Journal of Micromechanics and Microengineering 32, no. 5 (April 19, 2022): 055010. http://dx.doi.org/10.1088/1361-6439/ac6562.
Повний текст джерелаAcevedo-Mijangos, Jesús, Antonio Ramírez-Treviño, Daniel A. May-Arrioja, Patrick LiKamWa, Héctor Vázquez-Leal, and Agustín L. Herrera-May. "Design and fabrication of a microelectromechanical system resonator based on two orthogonal silicon beams with integrated mirror for monitoring in-plane magnetic field." Advances in Mechanical Engineering 11, no. 7 (July 2019): 168781401985368. http://dx.doi.org/10.1177/1687814019853683.
Повний текст джерелаLi, Jiachen, Jun Liu, Chunrong Peng, Xiangming Liu, Zhengwei Wu, and Fengjie Zheng. "Design and Testing of a Non-Contact MEMS Voltage Sensor Based on Single-Crystal Silicon Piezoresistive Effect." Micromachines 13, no. 4 (April 15, 2022): 619. http://dx.doi.org/10.3390/mi13040619.
Повний текст джерелаSchoeman, Johan, and Monuko du Plessis. "A two-port electrothermal model for suspended MEMS device structures with multiple inputs." Journal of Sensors and Sensor Systems 8, no. 2 (October 9, 2019): 293–304. http://dx.doi.org/10.5194/jsss-8-293-2019.
Повний текст джерелаKumar, Shashi, Pradeep Kumar Rathore, Brishbhan Singh Panwar, and Jamil Akhtar. "Development of a current mirror-integrated pressure sensor using CMOS-MEMS cofabrication techniques." Microelectronics International 35, no. 4 (October 1, 2018): 203–10. http://dx.doi.org/10.1108/mi-05-2017-0022.
Повний текст джерелаChu, V., J. Gaspar, and J. P. Conde. "Thin Film Microelectromechanical Systems." MRS Proceedings 715 (2002). http://dx.doi.org/10.1557/proc-715-a12.3.
Повний текст джерелаMehregany, Mehran, and Christian A. Zorman. "Micromachining Techniques for Advanced SiC MEMS." MRS Proceedings 640 (2000). http://dx.doi.org/10.1557/proc-640-h4.3.
Повний текст джерелаSathyanarayanan, S., and A. Vimala Juliet. "Simulation of Low Pressure MEMS Sensor for Biomedical Application." Journal of Nanotechnology in Engineering and Medicine 2, no. 3 (August 1, 2011). http://dx.doi.org/10.1115/1.4004025.
Повний текст джерелаUppal, Nitin, and Panos S. Shiakolas. "Micromachining Characteristics of NiTi Based Shape Memory Alloy Using Femtosecond Laser." Journal of Manufacturing Science and Engineering 130, no. 3 (June 1, 2008). http://dx.doi.org/10.1115/1.2936380.
Повний текст джерелаPal, Prem, and Kazuo Sato. "Advanced Wet Etch Bulk Micromachining in {100} Silicon Wafers." MRS Proceedings 1222 (2009). http://dx.doi.org/10.1557/proc-1222-dd05-04.
Повний текст джерелаNamura, Moriaki, and Toshiyuki Toriyama. "Experimental Study on Aerodynamics of Microelectromechanical Systems Based Single-Crystal-Silicon Microscale Supersonic Nozzle." Journal of Fluids Engineering 135, no. 8 (May 23, 2013). http://dx.doi.org/10.1115/1.4024080.
Повний текст джерелаPurohit, S., Veerla Swarnalatha, A. K. Pandey, RK Sharma, and Prem Pal. "Wet Bulk Micromachining Characteristics of Si{110} in NaOH-based solution." Journal of Micromechanics and Microengineering, October 19, 2022. http://dx.doi.org/10.1088/1361-6439/ac9b64.
Повний текст джерелаWood, R. J., S. Avadhanula, R. Sahai, E. Steltz, and R. S. Fearing. "Microrobot Design Using Fiber Reinforced Composites." Journal of Mechanical Design 130, no. 5 (March 26, 2008). http://dx.doi.org/10.1115/1.2885509.
Повний текст джерелаPurohit, S., V. Swarnalatha, A. K. Pandey, and P. Pal. "Wet anisotropic etching characteristics of Si{111} in NaOH-based solution for silicon bulk micromachining." Micro and Nano Systems Letters 10, no. 1 (December 1, 2022). http://dx.doi.org/10.1186/s40486-022-00162-7.
Повний текст джерелаCao, Zhiqiang, Tong-Yi Zhang, and Xin Zhang. "Microbridge Nanoindentation Testing of Plasma-Enhanced Chemical Vapor Deposited Silicon Oxide Films." MRS Proceedings 841 (2004). http://dx.doi.org/10.1557/proc-841-r12.4.
Повний текст джерелаNeves, Hercules P., Thomas D. Kudrle, Jia-Ming Chen, Scott G. Adams, Michel Maharbiz, Sergey Lopatin, and N. C. MacDonald. "Conformal Electroless Copper and Nickel Deposition on Mems Structures." MRS Proceedings 546 (1998). http://dx.doi.org/10.1557/proc-546-139.
Повний текст джерелаHopkins, Patrick E., та Leslie M. Phinney. "Thermal Conductivity Measurements on Polycrystalline Silicon Microbridges Using the 3ω Technique". Journal of Heat Transfer 131, № 4 (11 лютого 2009). http://dx.doi.org/10.1115/1.3072907.
Повний текст джерелаAbidin, Ummikalsom, Burhanuddin Yeop Majlis, and Jumril Yunas. "FABRICATION OF PYRAMIDAL CAVITY STRUCTURE WITH MICRON-SIZED TIP USING ANISOTROPIC KOH ETCHING OF SILICON (100)." Jurnal Teknologi 74, no. 10 (June 21, 2015). http://dx.doi.org/10.11113/jt.v74.4846.
Повний текст джерелаPal, Prem, Veerla Swarnalatha, Avvaru Venkata Narasimha Rao, Ashok Kumar Pandey, Hiroshi Tanaka, and Kazuo Sato. "High speed silicon wet anisotropic etching for applications in bulk micromachining: a review." Micro and Nano Systems Letters 9, no. 1 (February 22, 2021). http://dx.doi.org/10.1186/s40486-021-00129-0.
Повний текст джерелаSedky, Sherif. "Electrical Properties and Noise of Poly SiGe Deposited at Temperatures Compatible With MEMS Integration on Top of Standard CMOS." MRS Proceedings 729 (2002). http://dx.doi.org/10.1557/proc-729-u3.2.
Повний текст джерелаBorenstein, Jeffrey T., Kevin R. King, Hidetomi Terai, and Joseph P. Vacanti. "Capillary Formation In Microfabricated Polymer Scaffolds." MRS Proceedings 711 (2001). http://dx.doi.org/10.1557/proc-711-gg1.3.1.
Повний текст джерелаSwarnalatha, V., S. Purohit, P. Pal, and R. K. Sharma. "Enhanced etching characteristics of Si{100} in NaOH-based two-component solution." Micro and Nano Systems Letters 10, no. 1 (August 1, 2022). http://dx.doi.org/10.1186/s40486-022-00152-9.
Повний текст джерела