Добірка наукової літератури з теми "MICROBALLOONS"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "MICROBALLOONS".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "MICROBALLOONS"
Dando, Kerrick R., William M. Cross, Marc J. Robinson, and David R. Salem. "Characterization of mixture epoxy syntactic foams highly loaded with thermoplastic and glass microballoons." Journal of Composite Materials 53, no. 13 (November 27, 2018): 1737–49. http://dx.doi.org/10.1177/0021998318810782.
Повний текст джерелаUllas, A. V., Devendra Kumar, and Prasun Kumar Roy. "Epoxy-Glass Microballoon Syntactic Foams: Rheological Optimization of the Processing Window." Advances in Polymer Technology 2019 (April 1, 2019): 1–12. http://dx.doi.org/10.1155/2019/9180302.
Повний текст джерелаDando, Kerrick R., William M. Cross, Marc J. Robinson, and David R. Salem. "Production and characterization of epoxy syntactic foams highly loaded with thermoplastic microballoons." Journal of Cellular Plastics 54, no. 3 (March 23, 2017): 499–514. http://dx.doi.org/10.1177/0021955x17700093.
Повний текст джерелаKannan, Sathish, Salman Pervaiz, Abdulla Alhourani, Robert J. Klassen, Rajiv Selvam, and Meysam Haghshenas. "On the Role of Hollow Aluminium Oxide Microballoons during Machining of AZ31 Magnesium Syntactic Foam." Materials 13, no. 16 (August 11, 2020): 3534. http://dx.doi.org/10.3390/ma13163534.
Повний текст джерелаZhi, Chao, and Hairu Long. "Flexural Properties of Syntactic foam Reinforced by Warp Knitted Spacer Fabric." Autex Research Journal 16, no. 2 (June 1, 2016): 57–66. http://dx.doi.org/10.1515/aut-2015-0028.
Повний текст джерелаRafeichik, Sergey. "Dependence of Critical Diameter of Emulsion Explosive on Density in Steel Confinement." Siberian Journal of Physics 8, no. 3 (October 1, 2013): 128–34. http://dx.doi.org/10.54362/1818-7919-2013-8-3-128-134.
Повний текст джерелаSrivastava, Ankita, Ruchi Shukla, Kusum Sharma, Hitesh Jain, and D. B. Meshram. "Microballoons: A Gastro Retentive Drug Delivery System." Journal of Drug Delivery and Therapeutics 9, no. 4-s (August 15, 2019): 625–30. http://dx.doi.org/10.22270/jddt.v9i4-s.3274.
Повний текст джерелаJohn, Bibin, C. P. Reghunadhan Nair, and K. N. Ninan. "Low-Density Phenolic Syntactic Foams: Processing and Properties." Cellular Polymers 26, no. 4 (July 2007): 229–44. http://dx.doi.org/10.1177/026248930702600401.
Повний текст джерелаFerreira, S. C., Alexandre Velhinho, L. A. Rocha, and Francisco Manuel Braz Fernandes. "Microstructure Characterization of Aluminium Syntactic Functionally Graded Composites Containing Hollow Ceramic Microspheres Manufactured by Radial Centrifugal Casting." Materials Science Forum 587-588 (June 2008): 207–11. http://dx.doi.org/10.4028/www.scientific.net/msf.587-588.207.
Повний текст джерелаPenjuri, S. C. B., R. Nagaraju, S. Shaik, S. Damineni, and S. R. Poreddy. "GASTRORETENTIVE MICROBALLOONS OF RIBOFLAVIN: FORMULATION AND EVALUATION." INDIAN DRUGS 54, no. 04 (April 28, 2017): 47–52. http://dx.doi.org/10.53879/id.54.04.10708.
Повний текст джерелаДисертації з теми "MICROBALLOONS"
Brun, Etienne. "Influence des paramètres d'élaboration sur les propriétés mécaniques et microstructurales de microballons métalliques obtenus par électrolyse." Thesis, Dijon, 2012. http://www.theses.fr/2012DIJOS112.
Повний текст джерелаThe aim of this PhD Thesis is to study the gold-copper cyanide electrochemicalsystem and finally to realize gold-copper microspheres with a diameter of 800 μm and athickness between 20 and 40 μm. The composition, the microstructure and the roughness ofthese shells must be perfectly controlled. To synthesise such a material, electrodepositionfrom a gold-copper alkaline cyanide bath has been chosen.Initially, the influence of the principal electrochemical parameters (temperature of theplating bath, stirring, etc.) was studied. This study showed that it is possible to realize5 μm thick gold-copper alloys with various compositions. Actually, it was shown that thecopper content of deposits varies with the applied potential. When increasing the coppercontent of coatings, the nucleation and growth mechanisms change. As a result, the grain sizeand the microhardness of the coatings are modified. An increase in the copper content reducesthe grain size witch increases the microhardness until a critical grain size of 6 nm. Thisincrease of copper content also affects the microstructure: columnar, nodular even dendriticalstructures were observed.Then, 20 μm thick gold-copper coatings were realized using the same electrochemicalparameters. As expected, these coatings were very difficult to plate because of the instabilityof the electrocrystallization process resulting in the development of columnar and nodularstructures. Moreover, for thicknesses above 10 μm, all deposits are free from copper. Themicrostructure change of deposits can be explained by inhibition phenomena generated byfree cyanide. Actually, the reduction of gold-copper generates free cyanide at the cathodesurface which inhibits the electrocrystallization and promotes instantaneous nucleation. Thisproduction of free cyanide also modifies the electrolyte chemistry promoting the formation ofCu(CN)43- instead of Cu(CN)32-. Cu(CN)43- complexes have lower diffusion coefficients andhigher activation energy witch explains why copper content reduces when increasing thethickness of deposits.Then a model was established which explains the influence of free cyanide on thegold-copper electrocrystallization. This model permitted to develop solutions in order to limitthe inhibition phenomena and to optimize the electrocrystallization of gold-copper.One of the solutions developed is the application of an ultrasonic field. The cavitationgenerated by the ultrasonic field eliminates the free cyanide from the cathode surface andoptimize the electrocrystallization process. Gold-copper deposits on shells were then platedunder sonication. SEM and EDS results show that it is possible to make 20 to 40 μm thickcoatings with a controlled composition. All the coatings plated under sonication were smooth(80 ≤ Ra ≤ 230 nm) and compact for various copper contents. The microhardness of thesecoatings varies with grain size (Hall-Petch relation) which depends of copper content
Dutto, Vincent. "Mesure des défauts de forme de microballons par imagerie X : exploitation du phénomène de constraste de phase." Thesis, Toulon, 2018. http://www.theses.fr/2018TOUL0013/document.
Повний текст джерелаSince 1996, the CEA's Military Applications Division (DAM) guaranties the reliability and safety of Frenchnuclear warheads without conducting any further nuclear test. It relies particularly on major facilities forvalidating the equations used to model the functioning of nuclear weapons. Among them, the Megajoule Laser(LMJ) allows studying experimentally, as "laboratory" measurements, representative phenomena gatheringtime·scale and space distribution of extreme temperature and pressure conditions. These experiments are ledwith millimetric objects named microshells. Before experimenting them, these microshells are characterizedusing X·rays technics. On the radiographies, one can observe straight gray level variations which are generatedby the phase contrast phenomenon added to x·rays absorption contrast. Information included in this formercontrast is used to sharply determine microshell's edges. The delimiting points of these edges are thenintegrated as input data to compute microshell's surface form defects. A study is also led to determine theoptimized number of radiographies needed for estimating the search defect modes. Measurement uncertainty isfinally evaluated, thus giving a complete microshell's characterization
Lamy, Francis. "Mesure par méthodes optiques de l'épaisseur et de la rugosité d'une couche de DT solide conformée dans un microballon." Dijon, 2003. http://www.theses.fr/2003DIJOS056.
Повний текст джерелаThe inertial confinement fusion experiments require cryogenics targets fabrication, which is mainly a smooth uniform solid hydrogen isotopes (DT) layer at 20K. This layer is modelled in a plastic microshell that is placed in a gold cavity. One of the challenges of this program is to guarantee roughness and uniformity of the layer. Similar objects does not exist at ambient temperature. This report presents three methods convenient to characterise this layer in cryogenic conditions, with only one observation direction. The first one, shadowgraphy consists of the observation of the microshell thank to an optical system. The analyse of shadowgraph allows the DT layer characterisation in an equatorial plan. The two others techniques are the optical coherent tomography and the wide band interferometry. These methods provide the measurement of the layer thickness at the poles of microshell. The interference patterns are formed by the interference on two waves. The first one is reflected on a reference mirror, the second one is reflected on the interfaces of the microshell. The performances and uncertainties of the methods are analysed
Lattaud, Cecile. "Synthesis of low density foam shells for inertial confinement fusion experiments." Thesis, Dijon, 2011. http://www.theses.fr/2011DIJOS033/document.
Повний текст джерелаThis work deals with the fabrication process of low density foam shells and the sharp control of their shape (diameter, thickness, density, sphericity, non-concentricity). During this PhD we focused on the non-concentricity criterion which has to be lower than 1%. The shells are synthesized using a microencapsulation process leading to a double emulsion and followed by a thermal polymerization at 60°C. According to the literature, three major parameters, the density of the three phases, the deformations of the shells along the process and the kinetics of the polymerization have a direct influence on the shells non-concentricity. The results obtained showed that when the density gap between the internal water phase and the organic phase increases, the TMPTMA shells non-concentricity improves. A density gap of 0.078 g.cm-3 at 60°C, leads to an average non-concentricity of 2.4% with a yield of shells of 58%. It was also shown that the synthesis process can be considered as reproducible. While using the same internal water phase, equivalent non-concentricity results are obtained using either a straight tube, a tube with areas of constriction or a short wound tube. The time required to fix the shell’s shape is at least 20 minutes with thermal polymerization. So, it seems that the time spent by the shells inside the rotating flask allows the centering of the internal water phase inside the organic phase, whatever the circulation process used. In order to get higher polymerization rates and to avoid destabilization phenomena, we then focused our study on photopolymerization. When the synthesis is performed using a UV lamp with an efficient light intensity, the shells have a slightly higher thickness than the shells synthesized by thermal polymerization. Moreover, a really higher yield, around 80%, is achieved with UV polymerization. However, the average non-concentricity of the shells synthesized lays around 20%, which is really high compared to the 2.4% average non-concentricity obtained with thermal polymerization. It would be interesting to expose the shells to UV light at different times after collection in order to study the influence of the agitation time on the shells non-concentricity
CHAUHAN, DEEPIKA. "SILICONE MICROSPHERE FILLED SYNTACTIC FOAM." Thesis, 2016. http://dspace.dtu.ac.in:8080/jspui/handle/repository/15105.
Повний текст джерелаKumar, Dhirendra. "Study of Deformation and Erosion Behaviour of Epoxy-Glass Microballoon Based Syntactic Foam." Thesis, 2015. http://ethesis.nitrkl.ac.in/7143/1/Study_KumarD_2015.pdf.
Повний текст джерелаКниги з теми "MICROBALLOONS"
Ivanovich, Isakov Alekseĭ, ed. Laser thermonuclear targets and superdurable microballoons. Commack, N.Y: Nova Science Publishers, 1996.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration., ed. Humidity effects on soluble core mechanical and thermal properties (polyvinyl alcohol/microballoon composite) type 'CG' endospheres. Biddeford, Maine: Energy Materials Testing Laboratory, 1993.
Знайти повний текст джерелаLaser Thermonuclear Targets and Superdurable Microballoons: Proceedings of the Lebedev Physics Institute (Laser Thermonuclear Targets & Superdurable Microballoons). Nova Science Publishers, 1996.
Знайти повний текст джерелаЧастини книг з теми "MICROBALLOONS"
Gooch, Jan W. "Microballoons." In Encyclopedic Dictionary of Polymers, 461. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_7468.
Повний текст джерелаHawkins, G. F., James R. Lhota, J. R. Hribar, and E. C. Johnson. "Acoustic Emissions from Pressurized Microballoons." In Review of Progress in Quantitative Nondestructive Evaluation, 989–93. Boston, MA: Springer US, 1993. http://dx.doi.org/10.1007/978-1-4615-2848-7_126.
Повний текст джерелаFernandes, Paulo, Melanie Pretzl, Andreas Fery, George Tzvetkov, and Rainer Fink. "Novel Characterization Techniques of Microballoons." In Ultrasound Contrast Agents, 109–27. Milano: Springer Milan, 2010. http://dx.doi.org/10.1007/978-88-470-1494-7_9.
Повний текст джерелаStigler, Johannes, Martin Lundqvist, Tommy Cedervall, Kenneth Dawson, and Iseult Lynch. "Protein Interactions with Microballoons: Consequences for Biocompatibility and Application as Contrast Agents." In Ultrasound Contrast Agents, 53–66. Milano: Springer Milan, 2010. http://dx.doi.org/10.1007/978-88-470-1494-7_5.
Повний текст джерелаPanigrahi, Pradipta Kumar. "Turbulence Control (Microflap, Microballoon, Microsynthetic Jet)." In Encyclopedia of Microfluidics and Nanofluidics, 3373–84. New York, NY: Springer New York, 2015. http://dx.doi.org/10.1007/978-1-4614-5491-5_1633.
Повний текст джерелаPanigrahi, Pradipta Kumar. "Turbulence Control (Microflap, Microballoon, Microsynthetic Jet)." In Encyclopedia of Microfluidics and Nanofluidics, 1–14. Boston, MA: Springer US, 2013. http://dx.doi.org/10.1007/978-3-642-27758-0_1633-3.
Повний текст джерелаMohan, Virender Kumar, and Debesh Bhoi. "Percutaneous Microballoon Compression for Trigeminal Neuralgia." In Handbook of Trigeminal Neuralgia, 151–60. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-2333-1_20.
Повний текст джерелаManakari, Vyasaraj, Gururaj Parande, Mrityunjay Doddamani, T. S. Srivatsan, and Manoj Gupta. "Tribological Response of Magnesium/Glass Microballoon Syntactic Foams." In The Minerals, Metals & Materials Series, 311–20. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92567-3_19.
Повний текст джерелаDando, Kerrick R., and David R. Salem. "Nano-additive Reinforcement of Thermoplastic Microballoon Epoxy Syntactic Foams." In Proceedings of the 3rd Pan American Materials Congress, 393–402. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-52132-9_40.
Повний текст джерелаKawashima, Yoshiaki. "Development of Novel Microsphere and Microballoon DDSs by Polymeric Spherical Crystallization." In Spherical Crystallization as a New Platform for Particle Design Engineering, 59–76. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6786-1_5.
Повний текст джерелаТези доповідей конференцій з теми "MICROBALLOONS"
Lin, Tien-Chih, and Nikhil Gupta. "Impact Properties of Syntactic Foams and Effect of Microballoon Wall Thickness." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13616.
Повний текст джерелаMadawela, Raghvan, Zhenyu Ouyang, Gefu Ji, Guoqiang Li, and Samuel Ibekwe. "Mechanical Properties of New Hybrid Materials: Metallic Foam Filled With Syntactic Foam." In ASME 2011 Pressure Vessels and Piping Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/pvp2011-57725.
Повний текст джерелаEl-Hadek, Medhat A., and Hareesh V. Tippur. "Dynamic Fracture Behavior of Syntactic Epoxy Foams: Optical Measurements and Analysis." In ASME 2001 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/imece2001/amd-25411.
Повний текст джерелаBradley, D. K., J. Delettrez, P. A. Jaanimagi, F. J. Marshall, C. P. Verdon, J. D. Kilkenny, and P. Bell. "X-Ray Gated Images Of Imploding Microballoons." In 32nd Annual Technical Symposium, edited by Gary L. Stradling. SPIE, 1989. http://dx.doi.org/10.1117/12.948670.
Повний текст джерелаWahab, M. A., V. B. Gorugantu, and Nikhil Gupta. "Enhancement of Fracture Toughness of Syntactic Foams by Rubber Addition." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-82423.
Повний текст джерелаStampley, Kamissia, Eyassu Woldesenbet, and Manu John. "Nanoclay Based Grid Stiffened Syntactic Foam Composites." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-25771.
Повний текст джерелаDinbergs, A. E., and D. T. Auckland. "Sheet impedance characteristics for bound thin sheets of metal-coated microballoons." In IEEE Antennas and Propagation Society International Symposium 1992 Digest. IEEE, 1992. http://dx.doi.org/10.1109/aps.1992.221947.
Повний текст джерелаYoon, Sang-Hee, Vimalier Reyes-Ortiz, and Mohammad R. K. Mofrad. "MEMS-Based Microballoons Achieving Multidirectional Large-Strain for Cell Mechanics Studies." In ASME 2009 Summer Bioengineering Conference. American Society of Mechanical Engineers, 2009. http://dx.doi.org/10.1115/sbc2009-206853.
Повний текст джерелаMylavarapu, Phani, Guoqiang Li, Nikhil Gupta, Rahul Maharsia, and Eyassu Woldesenbet. "Ultrasonic Signal Attenuation in Syntactic Foams Filled With Rubber Particles." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59375.
Повний текст джерелаGupta, Nikhil, and Eyassu Woldesenbet. "Deformation and Fracture Characteristics of Cenosphere Filled Epoxies Under Compressive Loading Conditions." In ASME 2001 Engineering Technology Conference on Energy. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/etce2001-17022.
Повний текст джерелаЗвіти організацій з теми "MICROBALLOONS"
Simpson, R., and F. Helm. The shock Hugoniot of glass microballoons. Office of Scientific and Technical Information (OSTI), December 1994. http://dx.doi.org/10.2172/86942.
Повний текст джерелаHartman, E. Frederick, Thomas Andrew Zarick, Timothy J. Sheridan, and Eric F. Preston. Prompt radiation-induced conductivity in polyurethane foam and glass microballoons. Office of Scientific and Technical Information (OSTI), June 2014. http://dx.doi.org/10.2172/1200673.
Повний текст джерелаKeller, Jennie. Literature Review: An Overview of Epoxy Resin Syntactic Foams with Glass Microballoons. Office of Scientific and Technical Information (OSTI), March 2014. http://dx.doi.org/10.2172/1123771.
Повний текст джерелаChang, D. J., J. P. Nokes, and F. Hai. Stress Measurement Technique Using Microballoons with Carbon Fibers Embedded in an RTV Film,. Fort Belvoir, VA: Defense Technical Information Center, June 1997. http://dx.doi.org/10.21236/ada326263.
Повний текст джерелаHooper, C. F. Jr. [Time resolved plasma spectroscopy of imploded gas-filled microballoons: The next generation]. Final technical report, 17 April 1995--30 September 1997. Office of Scientific and Technical Information (OSTI), March 1998. http://dx.doi.org/10.2172/663263.
Повний текст джерелаHe, M. Y., and F. W. Zok. On the Mechanics of Microballoon-Reinforced Metal Matrix Composites. Fort Belvoir, VA: Defense Technical Information Center, April 1994. http://dx.doi.org/10.21236/ada277928.
Повний текст джерелаKeller, Jennie, Zachary Smith, Mollie Bello, and Nikolaus Lynn Cordes. Plackett-Burman Analysis of Glass Microballoon Filled Syntactic Foams. Office of Scientific and Technical Information (OSTI), August 2014. http://dx.doi.org/10.2172/1150667.
Повний текст джерелаBrown, Judith Alice, and Kevin Nicholas Long. Exemplar for simulation challenges: Large-deformation micromechanics of Sylgard 184/glass microballoon syntactic foams. Office of Scientific and Technical Information (OSTI), May 2018. http://dx.doi.org/10.2172/1436920.
Повний текст джерелаBrown, Judith Alice, and Kevin Nicholas Long. Modeling the Effect of Glass Microballoon (GMB) Volume Fraction on Behavior of Sylgard/GMB Composites. Office of Scientific and Technical Information (OSTI), May 2017. http://dx.doi.org/10.2172/1367414.
Повний текст джерела