Статті в журналах з теми "Micro/ Nano Molding"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Micro/ Nano Molding".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Ito, Hiroshi. "Micro-/Nano-Molding." Seikei-Kakou 30, no. 7 (June 25, 2018): 371–78. http://dx.doi.org/10.4325/seikeikakou.30.371.
Повний текст джерелаITO, Hiroshi. "Nano/Micro-Molding." Journal of the Japan Society for Technology of Plasticity 57, no. 663 (2016): 340–44. http://dx.doi.org/10.9773/sosei.57.340.
Повний текст джерелаITO, Hiroshi. "Polymer Micro-and Nano-Molding." Journal of the Japan Society for Technology of Plasticity 52, no. 610 (2011): 1143–47. http://dx.doi.org/10.9773/sosei.52.1143.
Повний текст джерелаNishiyabu, Kazuaki, Kenichi Kakishita, and Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders." Materials Science Forum 534-536 (January 2007): 381–84. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.381.
Повний текст джерелаYoo, Young Eun, Young Ho Seo, Seong Kon Kim, Tai Jin Je, and Doo Sun Choi. "Injection Molding Nano and Micro Pillar Arrays." Key Engineering Materials 326-328 (December 2006): 449–52. http://dx.doi.org/10.4028/www.scientific.net/kem.326-328.449.
Повний текст джерелаKAKISHITA, Kenichi, Kazuaki NISHIYABU, and Shigeo TANAKA. "2722 Micro Metal Injection Molding Using Hybrid Micro/Nano Powder." Proceedings of the JSME annual meeting 2006.1 (2006): 173–74. http://dx.doi.org/10.1299/jsmemecjo.2006.1.0_173.
Повний текст джерелаYu, P. C., Q. F. Li, J. Y. H. Fuh, T. Li, and P. W. Ho. "Micro injection molding of micro gear using nano-sized zirconia powder." Microsystem Technologies 15, no. 3 (July 12, 2008): 401–6. http://dx.doi.org/10.1007/s00542-008-0673-5.
Повний текст джерелаAsgar, Md Ali, Jun Kim, Muhammad Refatul Haq, Taekyung Kim, and Seok-min Kim. "A Comprehensive Review of Micro/Nano Precision Glass Molding Molds and Their Fabrication Methods." Micromachines 12, no. 7 (July 12, 2021): 812. http://dx.doi.org/10.3390/mi12070812.
Повний текст джерелаGuo, Wu, Zhaogang Liu, Yan Zhu та Li Li. "Fabrication of Poly(Vinylidene Fluoride)/Graphene Nano-Composite Micro-Parts with Increased β-Phase and Enhanced Toughness via Micro-Injection Molding". Polymers 13, № 19 (27 вересня 2021): 3292. http://dx.doi.org/10.3390/polym13193292.
Повний текст джерелаIto, Hiroshi. "ANTEC 2010 Ⅱ. Reports on Nano/Micro Molding, Injection Molding and Medical Platics Session." Seikei-Kakou 22, no. 10 (September 20, 2010): 574–77. http://dx.doi.org/10.4325/seikeikakou.22.574.
Повний текст джерелаIto, Hiroshi. "ANTEC 2009 II. Reports on Nano/Micro Molding, Injection Molding and Medical Platics Session." Seikei-Kakou 21, no. 10 (September 20, 2009): 614–17. http://dx.doi.org/10.4325/seikeikakou.21.614.
Повний текст джерелаTosello, Guido. "Latest Advancements in Micro Nano Molding Technologies—Process Developments and Optimization, Materials, Applications, Key Enabling Technologies." Micromachines 13, no. 4 (April 13, 2022): 609. http://dx.doi.org/10.3390/mi13040609.
Повний текст джерелаSaha, Biswajit, Wei Quan Toh, Erjia Liu, Shu Beng Tor, David E. Hardt, and Junghoon Lee. "A review on the importance of surface coating of micro/nano-mold in micro/nano-molding processes." Journal of Micromechanics and Microengineering 26, no. 1 (November 19, 2015): 013002. http://dx.doi.org/10.1088/0960-1317/26/1/013002.
Повний текст джерелаOh, Joo Won, Won Sik Lee, and Seong Jin Park. "Nanopowder Effect on Fe Nano/Micro-Bimodal Powder Injection Molding." Metallurgical and Materials Transactions A 49, no. 11 (August 6, 2018): 5535–45. http://dx.doi.org/10.1007/s11661-018-4851-5.
Повний текст джерелаWeng, Can, Tao Ding, Mingyong Zhou, Jiezhen Liu, and Hao Wang. "Formation Mechanism of Residual Stresses in Micro-Injection Molding of PMMA: A Molecular Dynamics Simulation." Polymers 12, no. 6 (June 17, 2020): 1368. http://dx.doi.org/10.3390/polym12061368.
Повний текст джерелаShin, Hong Gue, Heon Young Kim, and Byeong Hee Kim. "Nano Molding Technology for Optical Storage Media with Large-Area Nano-Pattern." Key Engineering Materials 364-366 (December 2007): 925–30. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.925.
Повний текст джерелаNISHIYABU, Kazuaki, Kenichi KAKISHITA, Toshiko OSADA, Satoru MATSUZAKI, and Shigeo TANAKA. "2204 A Fundamental Study on Micro/Nano Hybrid Powders Based Micro Powder Injection Molding." Proceedings of the JSME annual meeting 2005.1 (2005): 601–2. http://dx.doi.org/10.1299/jsmemecjo.2005.1.0_601.
Повний текст джерелаChoi, Joon-Phil, Taeho Ha, Min-Kyo Jung, Yeo-Ul Song, and Pil-Ho Lee. "Characterization of Powder Loading for Micro/Nano Powder Feedstock for Micro Powder Injection Molding." Journal of the Korean Society of Manufacturing Technology Engineers 32, no. 3 (June 30, 2023): 135–42. http://dx.doi.org/10.7735/ksmte.2023.32.3.135.
Повний текст джерелаMARUO, Shoji. "Development of Functional Devices Using Micro/Nano Stereolithography and Molding Techniques." NIPPON GOMU KYOKAISHI 87, no. 9 (2014): 382–88. http://dx.doi.org/10.2324/gomu.87.382.
Повний текст джерелаMARUO, Shoji. "F221005 Development and application of micro/nano stereolithography and molding techniques." Proceedings of Mechanical Engineering Congress, Japan 2012 (2012): _F221005–1—_F221005–3. http://dx.doi.org/10.1299/jsmemecj.2012._f221005-1.
Повний текст джерелаYou, Woo-Kyung, Joon-Phil Choi, Su-Min Yoon, and Jai-Sung Lee. "Low temperature powder injection molding of iron micro-nano powder mixture." Powder Technology 228 (September 2012): 199–205. http://dx.doi.org/10.1016/j.powtec.2012.05.016.
Повний текст джерелаDoerffel, Christoph, Gábor Jüttner, and Roland Dietze. "Micro Test Specimens for Compound Engineering with Minimum Material Needs." Materials Science Forum 825-826 (July 2015): 928–35. http://dx.doi.org/10.4028/www.scientific.net/msf.825-826.928.
Повний текст джерелаXu, Yan, Kai Leung Yung, and Hang Liu. "Active Scalable Elastomer Mold to Ease Demolding of High Aspect Ratio Micro Features." Advanced Materials Research 591-593 (November 2012): 880–83. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.880.
Повний текст джерелаJadidi, Majid Fazeli, Zahra Gholamvand, and Graham L. W. Cross. "High-resolution micro-cavity filling sensing by fiber optic interferometry." Review of Scientific Instruments 94, no. 1 (January 1, 2023): 015001. http://dx.doi.org/10.1063/5.0109751.
Повний текст джерелаFUDOUZI, Hiroshi, and Yoshio SAKKA. "Micro gas sensor assembly of tin oxide nano-particles by a capillary micro-molding process." Journal of the Ceramic Society of Japan 118, no. 1375 (2010): 202–5. http://dx.doi.org/10.2109/jcersj2.118.202.
Повний текст джерелаPervikov, Alexander, Nikita Toropkov, Sergey Kazantsev, Olga V. Bakina, Elena Glazkova, and Marat Lerner. "Preparation of Nano/Micro Bimodal Aluminum Powder by Electrical Explosion of Wires." Materials 14, no. 21 (November 2, 2021): 6602. http://dx.doi.org/10.3390/ma14216602.
Повний текст джерелаGao, Peng, Ian MacKay, Andrea Gruber, Joshua Krantz, Leonardo Piccolo, Giovanni Lucchetta, Riccardo Pelaccia, Leonardo Orazi, and Davide Masato. "Wetting Characteristics of Laser-Ablated Hierarchical Textures Replicated by Micro Injection Molding." Micromachines 14, no. 4 (April 16, 2023): 863. http://dx.doi.org/10.3390/mi14040863.
Повний текст джерелаPiotter, Volker, Klaus Plewa, Tobias Mueller, Andreas Ruh, Elvira Vorster, Hans Joachim Ritzhaupt-Kleissl, and Juergen Hausselt. "Manufacturing of High-Grade Micro Components by Powder Injection Molding." Key Engineering Materials 447-448 (September 2010): 351–55. http://dx.doi.org/10.4028/www.scientific.net/kem.447-448.351.
Повний текст джерелаBrock, Larry, and Jian Sheng. "Robust Fabrication of Polymeric Nanowire with Anodic Aluminum Oxide Templates." Micromachines 11, no. 1 (December 30, 2019): 46. http://dx.doi.org/10.3390/mi11010046.
Повний текст джерелаWu, Binrui, Chaoyi Peng, Ying Hu, Suli Xing, Dazhi Jiang, Jinshui Yang, Jiajie Lyu, and Yonglyu He. "Molding processed multi-layered and multi-functional nanocomposites with high structural ability, electrical conductivity and durable superhydrophobicity." Nanoscale 10, no. 42 (2018): 19916–26. http://dx.doi.org/10.1039/c8nr04317e.
Повний текст джерелаGu, Dapeng, Shouyao Liu, Gaifen Lu, Shuaibing Wang, Zibo Wang, Xiaofan Chen, Suwen Chen, Bingchao Yang, and Deng Pan. "Tribological performances of micro/nano-Si3N4–PTFE–EP composites prepared by high-pressure compression molding." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 235, no. 5 (January 12, 2021): 991–1003. http://dx.doi.org/10.1177/1464420720985171.
Повний текст джерелаLin, Huang-Ya, Ching-Ho Chang, and Wen-Bin Young. "Experimental and analytical study on filling of nano structures in micro injection molding." International Communications in Heat and Mass Transfer 37, no. 10 (December 2010): 1477–86. http://dx.doi.org/10.1016/j.icheatmasstransfer.2010.08.017.
Повний текст джерелаChoi, Joon-Phil, Jin-Soo Park, Eui-Jin Hong, Won-Sik Lee, and Jai-Sung Lee. "Analysis of the rheological behavior of Fe trimodal micro-nano powder feedstock in micro powder injection molding." Powder Technology 319 (September 2017): 253–60. http://dx.doi.org/10.1016/j.powtec.2017.06.056.
Повний текст джерелаZhang, N., J. S. Chu, C. J. Byrne, D. J. Browne, and M. D. Gilchrist. "Replication of micro/nano-scale features by micro injection molding with a bulk metallic glass mold insert." Journal of Micromechanics and Microengineering 22, no. 6 (May 17, 2012): 065019. http://dx.doi.org/10.1088/0960-1317/22/6/065019.
Повний текст джерелаBuntin, Artem E. "Ceramics Based on Nano-Modified Alumino-Silicates." Solid State Phenomena 316 (April 2021): 87–93. http://dx.doi.org/10.4028/www.scientific.net/ssp.316.87.
Повний текст джерелаLou, Bai Yang, Qiong Tong Ma, Shui Long Kong, Bin Xu, and Fang Liang Dong. "Study on Temperature Sensibility of Nano-Copper/Paraffin Materials." Advanced Materials Research 502 (April 2012): 91–95. http://dx.doi.org/10.4028/www.scientific.net/amr.502.91.
Повний текст джерелаChoi, Joon-Phil, Hyun-Gon Lyu, Won-Sik Lee, and Jai-Sung Lee. "Investigation of the rheological behavior of 316L stainless steel micro-nano powder feedstock for micro powder injection molding." Powder Technology 261 (July 2014): 201–9. http://dx.doi.org/10.1016/j.powtec.2014.04.047.
Повний текст джерелаChen, Ke, W. J. Meng, Fanghua Mei, J. Hiller, and D. J. Miller. "From micro- to nano-scale molding of metals: Size effect during molding of single crystal Al with rectangular strip punches." Acta Materialia 59, no. 3 (February 2011): 1112–20. http://dx.doi.org/10.1016/j.actamat.2010.10.044.
Повний текст джерелаSurace, Rossella, Claudia Pagano, Vincenzo Bellantone, Simone Gatti, Leonardo Castellani, Massimo Vighi, Grégory Stoclet, Sara Sechi, Irene Fassi, and Francesco Baldi. "Injection vs micro-injection molding of nano-particle filled polyamide 6: Moldability and structuring." Polymer 230 (September 2021): 124035. http://dx.doi.org/10.1016/j.polymer.2021.124035.
Повний текст джерелаOh, Joo Won, Won Sik Lee, and Seong Jin Park. "Investigation and modeling of binder removal process in nano/micro bimodal powder injection molding." International Journal of Advanced Manufacturing Technology 97, no. 9-12 (June 7, 2018): 4115–26. http://dx.doi.org/10.1007/s00170-018-2263-8.
Повний текст джерелаYe, Xiangdong, Yugang Duan, and Yucheng Ding. "Research on the Forming Mechanism of Micro/Nano Features during the Cast Molding Process." Nano-Micro Letters 3, no. 4 (December 2011): 249–55. http://dx.doi.org/10.1007/bf03353680.
Повний текст джерелаMehner, Andreas, Ju An Dong, Timo Hoja, Torsten Prenzel, Yildirim Mutlugünes, Ekkard Brinksmeier, Don Lucca, and Fritz Klaiber. "Diamond Machinable Sol-Gel Silica Based Hybrid Coatings for High Precision Optical Molds." Key Engineering Materials 438 (May 2010): 65–72. http://dx.doi.org/10.4028/www.scientific.net/kem.438.65.
Повний текст джерелаBelyakov, A. V. "High-density Micro- and Nano-Grain Size Ceramics. Transition from Open into Closed Pores. Part 1. Powder Preparation, Molding Mixture, Molding." Refractories and Industrial Ceramics 60, no. 6 (March 2020): 574–81. http://dx.doi.org/10.1007/s11148-020-00409-z.
Повний текст джерелаYang, Wei Min. "A Concept of Differential-Integral Method Applied in Polymer Processing and Molding." Key Engineering Materials 501 (January 2012): 1–9. http://dx.doi.org/10.4028/www.scientific.net/kem.501.1.
Повний текст джерелаHuang, Chen-Yu, Mei-Feng Lai, Wen-Lin Liu, and Zung-Hang Wei. "Anisotropic Wettability of Biomimetic Micro/Nano Dual-Scale Inclined Cones Fabricated by Ferrofluid-Molding Method." Advanced Functional Materials 25, no. 18 (March 25, 2015): 2670–76. http://dx.doi.org/10.1002/adfm.201500359.
Повний текст джерелаOrtega, Zaida, Mark McCourt, Francisco Romero, Luis Suárez, and Eoin Cunningham. "Recent Developments in Inorganic Composites in Rotational Molding." Polymers 14, no. 23 (December 2, 2022): 5260. http://dx.doi.org/10.3390/polym14235260.
Повний текст джерелаKim, Youngmin, Yong Choi, Young-Joo Kim, and Shinill Kang. "Construction of Injection Mold with MEMS RTD Sensor and MEMS Heater for Micro/Nano Molding Process." Japanese Journal of Applied Physics 44, no. 5B (May 24, 2005): 3591–95. http://dx.doi.org/10.1143/jjap.44.3591.
Повний текст джерелаZhou, Mingyong, Bingyan Jiang, Can Weng, and Lu Zhang. "Experimental study on the replication quality of micro–nano cross-shaped structure arrays in injection molding." Microsystem Technologies 23, no. 4 (January 18, 2016): 983–89. http://dx.doi.org/10.1007/s00542-016-2819-1.
Повний текст джерелаBrowne, David J., Dermot Stratton, Michael D. Gilchrist, and Cormac J. Byrne. "Bulk Metallic Glass Multiscale Tooling for Molding of Polymers with Micro to Nano Features: A Review." Metallurgical and Materials Transactions A 44, no. 5 (September 27, 2012): 2021–30. http://dx.doi.org/10.1007/s11661-012-1427-7.
Повний текст джерелаLee, Su-Han, Hye Bin Park, Sang-Keun Sung, Ju Kyung Lee, and Hyung Jin Kim. "A polymer-based artificial microenvironment for enhancing cell adhesion." Organoid 3 (February 25, 2023): e8. http://dx.doi.org/10.51335/organoid.2023.3.e8.
Повний текст джерела