Добірка наукової літератури з теми "Micro/ Nano Molding"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Micro/ Nano Molding".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Micro/ Nano Molding"
Ito, Hiroshi. "Micro-/Nano-Molding." Seikei-Kakou 30, no. 7 (June 25, 2018): 371–78. http://dx.doi.org/10.4325/seikeikakou.30.371.
Повний текст джерелаITO, Hiroshi. "Nano/Micro-Molding." Journal of the Japan Society for Technology of Plasticity 57, no. 663 (2016): 340–44. http://dx.doi.org/10.9773/sosei.57.340.
Повний текст джерелаITO, Hiroshi. "Polymer Micro-and Nano-Molding." Journal of the Japan Society for Technology of Plasticity 52, no. 610 (2011): 1143–47. http://dx.doi.org/10.9773/sosei.52.1143.
Повний текст джерелаNishiyabu, Kazuaki, Kenichi Kakishita, and Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders." Materials Science Forum 534-536 (January 2007): 381–84. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.381.
Повний текст джерелаYoo, Young Eun, Young Ho Seo, Seong Kon Kim, Tai Jin Je, and Doo Sun Choi. "Injection Molding Nano and Micro Pillar Arrays." Key Engineering Materials 326-328 (December 2006): 449–52. http://dx.doi.org/10.4028/www.scientific.net/kem.326-328.449.
Повний текст джерелаKAKISHITA, Kenichi, Kazuaki NISHIYABU, and Shigeo TANAKA. "2722 Micro Metal Injection Molding Using Hybrid Micro/Nano Powder." Proceedings of the JSME annual meeting 2006.1 (2006): 173–74. http://dx.doi.org/10.1299/jsmemecjo.2006.1.0_173.
Повний текст джерелаYu, P. C., Q. F. Li, J. Y. H. Fuh, T. Li, and P. W. Ho. "Micro injection molding of micro gear using nano-sized zirconia powder." Microsystem Technologies 15, no. 3 (July 12, 2008): 401–6. http://dx.doi.org/10.1007/s00542-008-0673-5.
Повний текст джерелаAsgar, Md Ali, Jun Kim, Muhammad Refatul Haq, Taekyung Kim, and Seok-min Kim. "A Comprehensive Review of Micro/Nano Precision Glass Molding Molds and Their Fabrication Methods." Micromachines 12, no. 7 (July 12, 2021): 812. http://dx.doi.org/10.3390/mi12070812.
Повний текст джерелаGuo, Wu, Zhaogang Liu, Yan Zhu та Li Li. "Fabrication of Poly(Vinylidene Fluoride)/Graphene Nano-Composite Micro-Parts with Increased β-Phase and Enhanced Toughness via Micro-Injection Molding". Polymers 13, № 19 (27 вересня 2021): 3292. http://dx.doi.org/10.3390/polym13193292.
Повний текст джерелаIto, Hiroshi. "ANTEC 2010 Ⅱ. Reports on Nano/Micro Molding, Injection Molding and Medical Platics Session." Seikei-Kakou 22, no. 10 (September 20, 2010): 574–77. http://dx.doi.org/10.4325/seikeikakou.22.574.
Повний текст джерелаДисертації з теми "Micro/ Nano Molding"
Sorgato, Marco. "Characterization of the micro injection molding of micro- and nano- structured polymer surfaces." Doctoral thesis, Università degli studi di Padova, 2016. http://hdl.handle.net/11577/3424332.
Повний текст джерелаTra i processi per la produzione di componenti micro e nano strutturati, il processo di micro stampaggio a iniezione presenta una serie di vantaggi che lo rendono commercialmente interessante. Tale tecnologia è caratterizzata da un elevato grado di riproducibilità, che la rende idonea alla produzione di massa di micro componenti in materiale termoplastico. Parlando di micro prodotti, la qualità del pezzo stampato risulta essere di fondamentale importanza e per questo, negli ultimi decenni, lo studio dei fattori che influenzano la qualità del prodotto finito, sono stati al centro di numerose indagini. Questo lavoro di tesi si pone come obbiettivo l'analisi del processo di micro stampaggio per la produzione di componenti micro e nano strutturati aventi features ad elevato rapporto di forma. Lo studio si concentra soprattutto sulle limitazioni del processo, utilizzando come casi studio delle geometrie particolarmente critiche per il micro stampaggio a iniezione. La caratterizzazione del processo e l'individuazione dei sui limiti sono stati indagati non solo considerando i parametri che influenzano la qualità del prodotto finito, ma anche le proprietà dei materiali termoplastici impiegati, l'interazione tra materiale plastico e stampo, e l'utilizzo di tecnologie ausiliarie come il riscaldamento e raffreddamento rapido dello stampo e l'evacuazione forzata dell'aria dalla cavità. I risultati confermano quanto riportato in letteratura e contribuiscono ad estendere lo stato dell'arte sul processo di micro stampaggio a iniezione, il quale rappresenta ad oggi una tecnologia affidabile ed economicamente efficace per la produzione su larga scala di micro componenti in materiale plastico in diversi settori industriali.
Huang-YaLin and 林晃業. "Experimental and Analytical Study on Filling of Nano and Micro Structures in Micro Injection Molding." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/91745851280465541640.
Повний текст джерела國立成功大學
航空太空工程學系碩博士班
98
Nano and micro technology is attracting more attention and has increasing applications in recent years. Among the products with applications of nano technology, many of them are made of polymer plastics. Micro injection molding is one of the important processes for polymer plastics. In micro injection molding, the ability for the polymer melt to flow into the micro/nano features is a crucial factor for successful molding. The flow behavior of polymer in micro/nano features needs to be explored further to facilitate the molding process. In this study, we investigated the effects of the processing conditions on the filling of micro/nano features analytically and experimentally. Firstly, mold inserts with micro or nano features were constructed by LIGA-LIKE process. Secondly, an analytical model was developed to model the filling of polymer melt in the micro/nano features. Molding experiments were performed to verify the analytical filling model. With this verified model, a theoretical filling distance can be predicted for the micro/nano injection molding, and the suitable processing conditions can be estimated for different geometries of product. Finally, the Infrared heating system is introduced to improve the penetration distance in nano feature filling.
Ho, Chang-En, and 何長恩. "Study on the Molding of Nano- and Micro-features Using Injection and Imprint Techniques." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/30024667961040932032.
Повний текст джерела龍華科技大學
工程技術研究所
97
In recent years, there is a considerable development in technique which has been a tempting trend of miniaturization in production technology and the techniques which demands the quality and structures which face the role in nanotechnology. In this study, molding of nano-and micro-features using injection and imprint technique is focused. A square, silicon grating in a 3x3 mm2 array, with a depth of 82 nm 1.5µm 0.9µm, and a pitch of 3.0µm. The grating costs only about NT 4000. It provides a simple way to replicate high quality nano-scale molded parts by using a simple custom-made injection machine and hot embossing machine results in manufacturing the different shape and the structure depth nano-and micro-features part. In the injection molding process, nano-and micron structures will be masked in the mold inserts molds with a simple silicon dye using the assist of simple custom-made injection machine. In this technique polymethylmethacrylate (PMMA) and polycarbonate (PC) act as the nano-micro-features. In the analysis the depth of 82 nm and 0.9 μm can be produced by the micro-structural formability. It is a low-cost and fast way to successfully produce high-precision nano-and micro structural elements. The results shows that, when the simple mold and custom-made machine were employed, structure is encountered with the nano-micron micro-structure shape, by improve the mold temperature and injection pressure, which can be a clear edge and the surface of a higher quality. Generally in the press printing process, nano-micro-features structure can be produced 82 nm, 1.5 μm and 0.9 μm can be obtained. An optical film of PMMA and PC is used in molding experiments. The depth of 82 nm, 1.5 μm and 0.9 μm can be produced by the micro-structural formability. To identify the glass transition temperature thermal analysis instruments were used to control the parameters as a reference. For a silicone mold-jet we required the imprinted molding window. A single parameter method is used to investigate the dye temperature imprints pressure, imprint time and ejection temperature of nano and micro-structure for the surface roughness and shape effects. The result shows that, forming a high pressure and imprinted with the injection temperature is linear. If the Injection temperature is closer to the glass transition temperature, will be difficult to form the shapes and also affects the roughness of the most significant process parameters in the ejection temperature. To investigate the surface morphology of the obtained micron-sized structures we require Chanai electron microscopy. Further to make the measurements of height and surface roughness of the samples we use atomic force microscope (AFM), Chennai-micron structure of its.
Книги з теми "Micro/ Nano Molding"
Hot Embossing Micro Nano Technologies. William Andrew Publishing, 2009.
Знайти повний текст джерелаTosello, Guido, ed. Latest Advancements in Micro Nano Molding Technologies – Process Developments and Optimization, Materials, Applications, Key Enabling Technologies. MDPI, 2022. http://dx.doi.org/10.3390/books978-3-0365-5433-4.
Повний текст джерелаЧастини книг з теми "Micro/ Nano Molding"
Abdul Manaf, Ahmad Rosli, and Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications." In Micro/Nano Technologies, 1–30. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6588-0_21-1.
Повний текст джерелаAbdul Manaf, Ahmad Rosli, and Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications." In Micro/Nano Technologies, 1–30. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-6588-0_21-2.
Повний текст джерелаAbdul Manaf, Ahmad Rosli, and Jiwang Yan. "Press Molding of Hybrid Fresnel Lenses for Infrared Applications." In Micro/Nano Technologies, 661–90. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0098-1_21.
Повний текст джерелаZhou, Tianfeng. "Precision Molding of Microstructures on Chalcogenide Glass for Infrared Optics." In Micro/Nano Technologies, 635–59. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-13-0098-1_20.
Повний текст джерелаNishiyabu, Kazuaki, Kenichi Kakishita, and Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders." In Progress in Powder Metallurgy, 381–84. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.381.
Повний текст джерелаYoo, Young Eun, Young Ho Seo, Seong Kon Kim, Tai Jin Je, and Doo Sun Choi. "Injection Molding Nano and Micro Pillar Arrays." In Experimental Mechanics in Nano and Biotechnology, 449–52. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-415-4.449.
Повний текст джерелаLee, H. K., G. E. Yang, and Hong Gun Kim. "Residual Stress and Surface Molding Conditions in Thin Wall Injection Molding." In Macro-, Meso-, Micro- and Nano-Mechanics of Materials, 137–42. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-979-2.137.
Повний текст джерелаVranić, Edina. "Micro-molding and Its Application to Drug Delivery." In Nano- and Microfabrication Techniques in Drug Delivery, 275–94. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-26908-0_11.
Повний текст джерелаLu, Yanjun, Yuming Huang, and Jiangxiu Ouyang. "Introduction to Precision Grinding and Injection Molding Micro/Nano Structures." In Fabrication of Micro/Nano Structures via Precision Machining, 287–99. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1338-1_13.
Повний текст джерелаLu, Yanjun, Xingyu Mou, and Fumin Chen. "Fabrication of Micro-structured Polymer Via Precision Grinding and Injection Molding." In Fabrication of Micro/Nano Structures via Precision Machining, 361–78. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-1338-1_17.
Повний текст джерелаТези доповідей конференцій з теми "Micro/ Nano Molding"
Wu, Cheng-Hsien, and Wei-Hsu Chen. "Injection molding of grating optical elements with microfeatures." In Smart Materials, Nano-, and Micro-Smart Systems, edited by Jung-Chih Chiao, David N. Jamieson, Lorenzo Faraone, and Andrew S. Dzurak. SPIE, 2005. http://dx.doi.org/10.1117/12.582425.
Повний текст джерелаCui, Liangyu, Zhichen Huo, and Dawei Zhang. "Ultrasonic Molding of Polymer Micro Devices." In 2019 IEEE International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-NANO). IEEE, 2019. http://dx.doi.org/10.1109/3m-nano46308.2019.8947356.
Повний текст джерелаLi, Sijie, Hongxing Xie, Yun Ye, Sheng Xu, Enguo Chen, and Tailiang Guo. "Injection molding and performance testing of quantum-dot diffusion plate." In Nanophotonics, Micro/Nano Optics, and Plasmonics VIII, edited by Zhiping Zhou, Kazumi Wada, Limin Tong, Zheyu Fang, and Takuo Tanaka. SPIE, 2023. http://dx.doi.org/10.1117/12.2643875.
Повний текст джерелаTom, Alan M., Aleksandar K. Angelov, and John P. Coulter. "An Experimental Investigation of a Micro Injection Molded Mechanical Device." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81968.
Повний текст джерелаLucchetta, Giovanni, Davide Masato, Marco Sorgato, and Nicola Milan. "Effect and Modeling of Ultrasound-Assisted Ejection in Micro Injection Molding." In WCMNM 2018 World Congress on Micro and Nano Manufacturing. Singapore: Research Publishing Services, 2018. http://dx.doi.org/10.3850/978-981-11-2728-1_26.
Повний текст джерелаShin, Jihyun, Shuji Tanaka, and Masayoshi Esashi. "Nanostructured Silicon Carbide Molds for Glass Press Molding." In 2007 2nd IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2007. http://dx.doi.org/10.1109/nems.2007.352019.
Повний текст джерелаSitti, Metin. "High Aspect Ratio Polymer Micro/Nano-Structure Manufacturing Using Nanoembossing, Nanomolding and Directed Self-Assembly." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42787.
Повний текст джерелаLuca, Antonio, Henrik Siesenis, and Oltmann Riemer. "Prediction of shrinkage and warpage effects of a micro component via injection molding process simulation." In WCMNM 2018 World Congress on Micro and Nano Manufacturing. Singapore: Research Publishing Services, 2018. http://dx.doi.org/10.3850/978-981-11-2728-1_08.
Повний текст джерелаMasato, D., M. Sorgato, A. Batal, S. Dimov, and G. Lucchetta. "Effect of Laser-induced Periodic Surface Structures on Wall Slip of Polypropylene in Thin-wall Injection Molding." In WCMNM 2018 World Congress on Micro and Nano Manufacturing. Singapore: Research Publishing Services, 2018. http://dx.doi.org/10.3850/978-981-11-2728-1_46.
Повний текст джерелаZhou, Tianfeng, Zhanchen Zhu, Jiaqing Xie, Qian Yu, Jia Zhou, and Xibin Wang. "Simulation and experimental study on the precision glass molding for microstructures on optical glass based on relaxation effect." In Micro- and Nano-Optics, Catenary Optics, and Subwavelength Electromagnetics, edited by Reinhart Poprawe, Bin Fan, Xiong Li, Min Gu, Mingbo Pu, and Xiangang Luo. SPIE, 2019. http://dx.doi.org/10.1117/12.2504777.
Повний текст джерела