Статті в журналах з теми "Metal extrusion additive manufacturing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Metal extrusion additive manufacturing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Langelandsvik, Geir, Magnus Eriksson, Odd M. Akselsen, and Hans J. Roven. "Wire arc additive manufacturing of AA5183 with TiC nanoparticles." International Journal of Advanced Manufacturing Technology 119, no. 1-2 (November 13, 2021): 1047–58. http://dx.doi.org/10.1007/s00170-021-08287-6.
Costa, José, Elsa Sequeiros, Maria Teresa Vieira, and Manuel Vieira. "Additive Manufacturing." U.Porto Journal of Engineering 7, no. 3 (April 30, 2021): 53–69. http://dx.doi.org/10.24840/2183-6493_007.003_0005.
Fabrizio, Matteo, Matteo Strano, Daniele Farioli, and Hermes Giberti. "Extrusion Additive Manufacturing of PEI Pellets." Journal of Manufacturing and Materials Processing 6, no. 6 (December 8, 2022): 157. http://dx.doi.org/10.3390/jmmp6060157.
Tateno, Toshitake, Akira Kakuta, Hayate Ogo, and Takaya Kimoto. "Ultrasonic Vibration-Assisted Extrusion of Metal Powder Suspension for Additive Manufacturing." International Journal of Automation Technology 12, no. 5 (September 5, 2018): 775–83. http://dx.doi.org/10.20965/ijat.2018.p0775.
Jabbari, Amin, and Karen Abrinia. "A metal additive manufacturing method: semi-solid metal extrusion and deposition." International Journal of Advanced Manufacturing Technology 94, no. 9-12 (September 25, 2017): 3819–28. http://dx.doi.org/10.1007/s00170-017-1058-7.
Langelandsvik, Geir, Mathieu Grandcolas, Kristian G. Skorpen, Trond Furu, Odd M. Akselsen, and Hans Jørgen Roven. "Development of Al-TiC Wire Feedstock for Additive Manufacturing by Metal Screw Extrusion." Metals 10, no. 11 (November 6, 2020): 1485. http://dx.doi.org/10.3390/met10111485.
Krinitcyn, Maksim, Alexandr Pervikov, Natalya Svarovskaya, Alexandr Lozhkomoev, and Marat Lerner. "Extrusion-Based Additive Manufacturing of the Ti6Al4V Alloy Parts." Coatings 13, no. 6 (June 8, 2023): 1067. http://dx.doi.org/10.3390/coatings13061067.
Van Sice, Corrie, and Jeremy Faludi. "COMPARING ENVIRONMENTAL IMPACTS OF METAL ADDITIVE MANUFACTURING TO CONVENTIONAL MANUFACTURING." Proceedings of the Design Society 1 (July 27, 2021): 671–80. http://dx.doi.org/10.1017/pds.2021.67.
Annoni, Massimiliano, Hermes Giberti, and Matteo Strano. "Feasibility Study of an Extrusion-based Direct Metal Additive Manufacturing Technique." Procedia Manufacturing 5 (2016): 916–27. http://dx.doi.org/10.1016/j.promfg.2016.08.079.
Jiang, Dayue, and Fuda Ning. "Bi-metal structures fabricated by extrusion-based sintering-assisted additive manufacturing." Journal of Manufacturing Processes 98 (July 2023): 216–22. http://dx.doi.org/10.1016/j.jmapro.2023.05.025.
Zhou, Longfei, Jenna Miller, Jeremiah Vezza, Maksim Mayster, Muhammad Raffay, Quentin Justice, Zainab Al Tamimi, Gavyn Hansotte, Lavanya Devi Sunkara, and Jessica Bernat. "Additive Manufacturing: A Comprehensive Review." Sensors 24, no. 9 (April 23, 2024): 2668. http://dx.doi.org/10.3390/s24092668.
Sartini, Mikhailo, Iacopo Bianchi, Alessio Vita, Michele Germani, and Marco Mandolini. "An analytic cost model for bound metal deposition." Proceedings of the Design Society 4 (May 2024): 1819–28. http://dx.doi.org/10.1017/pds.2024.184.
Blindheim, Jørgen, Torgeir Welo, and Martin Steinert. "Investigating the Mechanics of Hybrid Metal Extrusion and Bonding Additive Manufacturing by FEA." Metals 9, no. 8 (July 24, 2019): 811. http://dx.doi.org/10.3390/met9080811.
Sakib-Uz-Zaman, Chowdhury, and Mohammad Abu Hasan Khondoker. "A Review on Extrusion Additive Manufacturing of Pure Copper." Metals 13, no. 5 (April 28, 2023): 859. http://dx.doi.org/10.3390/met13050859.
Zhang, Zhicheng, and Ismail Fidan. "Machine Learning-Based Void Percentage Analysis of Components Fabricated with the Low-Cost Metal Material Extrusion Process." Materials 15, no. 12 (June 17, 2022): 4292. http://dx.doi.org/10.3390/ma15124292.
Ortega Varela de Seijas, Manuel, Andreas Bardenhagen, Thomas Rohr, and Enrico Stoll. "Indirect Induction Sintering of Metal Parts Produced through Material Extrusion Additive Manufacturing." Materials 16, no. 2 (January 16, 2023): 885. http://dx.doi.org/10.3390/ma16020885.
Rosnitschek, Tobias, Johannes Glamsch, Christopher Lange, Bettina Alber-Laukant, and Frank Rieg. "An Automated Open-Source Approach for Debinding Simulation in Metal Extrusion Additive Manufacturing." Designs 5, no. 1 (January 2, 2021): 2. http://dx.doi.org/10.3390/designs5010002.
Mohammadizadeh, Mahdi, Hao Lu, Ismail Fidan, Khalid Tantawi, Ankit Gupta, Seymur Hasanov, Zhicheng Zhang, Frank Alifui-Segbaya, and Allan Rennie. "Mechanical and Thermal Analyses of Metal-PLA Components Fabricated by Metal Material Extrusion." Inventions 5, no. 3 (August 24, 2020): 44. http://dx.doi.org/10.3390/inventions5030044.
Sæterbø, Mathias, and Wei Deng Solvang. "Evaluating the cost competitiveness of metal additive manufacturing – A case study with metal material extrusion." CIRP Journal of Manufacturing Science and Technology 45 (October 2023): 113–24. http://dx.doi.org/10.1016/j.cirpj.2023.06.005.
Jimbo, Koki, and Toshitake Tateno. "Shape Contraction in Sintering of 3D Objects Fabricated via Metal Material Extrusion in Additive Manufacturing." International Journal of Automation Technology 13, no. 3 (May 5, 2019): 354–60. http://dx.doi.org/10.20965/ijat.2019.p0354.
Kedziora, Slawomir, Thierry Decker, Elvin Museyibov, Julian Morbach, Steven Hohmann, Adrian Huwer, and Michael Wahl. "Strength Properties of 316L and 17-4 PH Stainless Steel Produced with Additive Manufacturing." Materials 15, no. 18 (September 9, 2022): 6278. http://dx.doi.org/10.3390/ma15186278.
Dârlău, Lucian-Corneliu. "Obtaining Metal Parts by Additive Manufacturing, as an Alternative to Traditional Manufacturing Methods – A Review." Bulletin of the Polytechnic Institute of Iași. Machine constructions Section 69, no. 1 (March 1, 2023): 61–80. http://dx.doi.org/10.2478/bipcm-2023-0005.
POLISHCHUK, Oleg, Andrii POLISHCHUK, Svitlana LISEVICH, Anatoliy ZALIZETSKYI, and Vasiliy MELNYK. "THE MANUFACTURING PRODUCTS AND PARTS BY 3D-PRINTING METHOD FROM COMPOSITE FILAMENTS WITH HIGH METAL CONTENT." Herald of Khmelnytskyi National University. Technical sciences 309, no. 3 (May 26, 2022): 104–10. http://dx.doi.org/10.31891/2307-5732-2022-309-3-104-110.
Liu, Lanbing, Chao Ding, Yunhui Mei, and Guoquan Lu. "Tailoring a Silver Paste for Additive Manufacturing of Co-Fired Ferrite Magnetic Components." Materials 12, no. 5 (March 11, 2019): 817. http://dx.doi.org/10.3390/ma12050817.
Sharma, Gourav K., Piyush Pant, Prashant K. Jain, Pavan K. Kankar, and Puneet Tandon. "On the suitability of induction heating system for metal additive manufacturing." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235, no. 1-2 (July 14, 2020): 219–29. http://dx.doi.org/10.1177/0954405420937854.
Suwanpreecha, Chanun, and Anchalee Manonukul. "A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding." Metals 12, no. 3 (February 28, 2022): 429. http://dx.doi.org/10.3390/met12030429.
Lotfi, Zahraa, Amir Mostafapur, and Ahmad Barari. "Properties of Metal Extrusion Additive Manufacturing and Its Application in Digital Supply Chain Management." IFAC-PapersOnLine 54, no. 1 (2021): 199–204. http://dx.doi.org/10.1016/j.ifacol.2021.08.024.
Hertle, Sebastian, Tobias Kleffel, Andreas Wörz, and Dietmar Drummer. "Production of polymer-metal hybrids using extrusion-based additive manufacturing and electrochemically treated aluminum." Additive Manufacturing 33 (May 2020): 101135. http://dx.doi.org/10.1016/j.addma.2020.101135.
You, Siyao, Dayue Jiang, Fuji Wang, and Fuda Ning. "Anisotropic sintering shrinkage behavior of stainless steel fabricated by extrusion-based metal additive manufacturing." Journal of Manufacturing Processes 101 (September 2023): 1508–20. http://dx.doi.org/10.1016/j.jmapro.2023.07.026.
Di Pompeo, Valerio, Eleonora Santecchia, Alberto Santoni, Kamal Sleem, Marcello Cabibbo, and Stefano Spigarelli. "Microstructure and Defect Analysis of 17-4PH Stainless Steel Fabricated by the Bound Metal Deposition Additive Manufacturing Technology." Crystals 13, no. 9 (August 28, 2023): 1312. http://dx.doi.org/10.3390/cryst13091312.
Siedlecki, Krzysztof, Marcin Słoma, and Andrzej Skalski. "Comparison between Micro-Powder Injection Molding and Material Extrusion Additive Manufacturing of Metal Powders for the Fabrication of Sintered Components." Materials 16, no. 23 (November 22, 2023): 7268. http://dx.doi.org/10.3390/ma16237268.
Sadaf, Mahrukh, Mario Bragaglia, Lidija Slemenik Perše, and Francesca Nanni. "Advancements in Metal Additive Manufacturing: A Comprehensive Review of Material Extrusion with Highly Filled Polymers." Journal of Manufacturing and Materials Processing 8, no. 1 (January 16, 2024): 14. http://dx.doi.org/10.3390/jmmp8010014.
Li, Zhong, Xiao Gang Hu, Hong Xing Lu, and Qiang Zhu. "Microstructure Design of Semi-Solid Slurry for Metal Direct Writing." Solid State Phenomena 348 (August 28, 2023): 33–38. http://dx.doi.org/10.4028/p-qdk1x5.
Mahr, Alexander, Thomas Schütt, Tobias Rosnitschek, Stephan Tremmel, and Frank Döpper. "Evaluation of Powder- and Extrusion-Based Metal Additive Manufacturing Processes for the Sustainable Fabrication of Spare Parts in Electromobility." Sustainability 16, no. 8 (April 19, 2024): 3425. http://dx.doi.org/10.3390/su16083425.
Sharma, Gourav K., Piyush Pant, Prashant K. Jain, Pavan K. Kankar, and Puneet Tandon. "Analysis of novel induction heating extruder for additive manufacturing using aluminum filament." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235, no. 12 (May 8, 2021): 1961–70. http://dx.doi.org/10.1177/09544054211014451.
Chang, Gaoyuan, Xiaoxun Zhang, Fang Ma, Cheng Zhang, and Luyang Xu. "Printing, Debinding and Sintering of 15-5PH Stainless Steel Components by Fused Deposition Modeling Additive Manufacturing." Materials 16, no. 19 (September 23, 2023): 6372. http://dx.doi.org/10.3390/ma16196372.
Galati, Manuela, and Paolo Minetola. "Analysis of Density, Roughness, and Accuracy of the Atomic Diffusion Additive Manufacturing (ADAM) Process for Metal Parts." Materials 12, no. 24 (December 9, 2019): 4122. http://dx.doi.org/10.3390/ma12244122.
Alexander, David, Bianca Myraih Ceballos, David Yapell, Christian Ruiz, Rod L. Borup, and Tommy Rockward. "Suitability of Composite Feed-Stock Material for Bi-Polar Plates Using Low-Cost Additive Manufacturing." ECS Meeting Abstracts MA2022-02, no. 40 (October 9, 2022): 1456. http://dx.doi.org/10.1149/ma2022-02401456mtgabs.
Galantucci, Luigi Maria, Alessandro Pellegrini, Maria Grazia Guerra, and Fulvio Lavecchia. "3D Printing of parts using metal extrusion: an overview of shaping debinding and sintering technology." Advanced Technologies & Materials 47, no. 1 (June 15, 2022): 25–32. http://dx.doi.org/10.24867/atm-2022-1-005.
Gong, Haijun, Cameron Crater, Ana Ordonez, Craig Ward, Madison Waller, and Charles Ginn. "Material Properties and Shrinkage of 3D Printing Parts using Ultrafuse Stainless Steel 316LX Filament." MATEC Web of Conferences 249 (2018): 01001. http://dx.doi.org/10.1051/matecconf/201824901001.
Mata, Margarida, Mateus Pinto, and José Costa. "Topological Optimization of a Metal Extruded Doorhandle using nTopology." U.Porto Journal of Engineering 9, no. 1 (January 23, 2023): 42–54. http://dx.doi.org/10.24840/2183-6493_009-001_001620.
Cañadilla, Antonio, Ana Romero, Gloria P. Rodríguez, Miguel Á. Caminero, and Óscar J. Dura. "Mechanical, Electrical, and Thermal Characterization of Pure Copper Parts Manufactured via Material Extrusion Additive Manufacturing." Materials 15, no. 13 (July 1, 2022): 4644. http://dx.doi.org/10.3390/ma15134644.
Ecker, J. V., K. Dobrezberger, J. Gonzalez-Gutierrez, M. Spoerk, Ch Gierl-Mayer, and H. Danninger. "Additive Manufacturing of Steel and Copper Using Fused Layer Modelling: Material and Process Development." Powder Metallurgy Progress 19, no. 2 (December 1, 2019): 63–81. http://dx.doi.org/10.1515/pmp-2019-0007.
Khan, Mohd Yunus, P. S. Rao, and B. S. Pabla. "On the use of Copper Tool developed by Atomic Diffusion Additive Manufacturing (ADAM) Process for Electrical Discharge Machining." E3S Web of Conferences 455 (2023): 02014. http://dx.doi.org/10.1051/e3sconf/202345502014.
Blindheim, Jørgen, Torgeir Welo, and Martin Steinert. "First demonstration of a new additive manufacturing process based on metal extrusion and solid-state bonding." International Journal of Advanced Manufacturing Technology 105, no. 5-6 (November 1, 2019): 2523–30. http://dx.doi.org/10.1007/s00170-019-04385-8.
Suzuki, Tomoya, and Toshitake Tateno. "Effect of Material Temperature on Fabrication Accuracy of Metal Powder Extrusion Additive Manufacturing with Ultrasonic Vibration." Proceedings of Manufacturing Systems Division Conference 2022 (2022): 505. http://dx.doi.org/10.1299/jsmemsd.2022.505.
Kain, M., M. Calaon, D. B. Pedersen, and G. Tosello. "On the implementation of metal additive manufacturing in the tooling process chain for polymer profile extrusion." Procedia CIRP 93 (2020): 26–31. http://dx.doi.org/10.1016/j.procir.2020.03.141.
Yi, Zhonghuai, Ting Shen, Huiwen Xiong, Xiao Kang, Lei Zhang, and Kechao Zhou. "Strong and densified 3D metal-ceramic composite with strengthened layer structure by material extrusion additive manufacturing." Additive Manufacturing 84 (March 2024): 104136. http://dx.doi.org/10.1016/j.addma.2024.104136.
Wei, Xueying, Ingolf Behm, Tony Winkler, and Rüdiger Bähr. "Optimization of extrusion-based additive manufacturing of bronze metal parts using a CuSn10/Polylactic acid composite." Journal of Materials Research and Technology 30 (May 2024): 3602–10. http://dx.doi.org/10.1016/j.jmrt.2024.04.111.
Rosnitschek, Tobias, Andressa Seefeldt, Bettina Alber-Laukant, Thomas Neumeyer, Volker Altstädt, and Stephan Tremmel. "Correlations of Geometry and Infill Degree of Extrusion Additively Manufactured 316L Stainless Steel Components." Materials 14, no. 18 (September 9, 2021): 5173. http://dx.doi.org/10.3390/ma14185173.