Дисертації з теми "Medical equipment management"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-43 дисертацій для дослідження на тему "Medical equipment management".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Dhillon, Simron. "Oceanside Durable Medical Equipment." Thesis, California State University, Long Beach, 2016. http://pqdtopen.proquest.com/#viewpdf?dispub=10116155.
Повний текст джерелаOceanside Durable Medical Equipment (DME) is an accredited start-up company that will offer a comprehensive line of the latest medical supplies and equipment to patients in Long Beach, California. This company will focus on the distribution of leading medical equipment brands to patients who are in need of support for short-term and chronic health conditions. Durable medical equipment can offer help outside of the hospital environment and aid in a better quality of life.
With more than 2.4 million individuals over 60 years old in Southern California, there appears to be a large market and opportunity for this company. Oceanside DME will contract with leading medical equipment manufacturers and healthcare providers to deliver patients with quality products. A rapidly growing market for medical equipment will allow Oceanside DME to create a presence in this healthcare industry.
Binder, Joshua R. (Joshua Robert) 1974. "Supply base segmentation and management at a medical equipment manufacturer." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/34750.
Повний текст джерелаIncludes bibliographical references.
This thesis proposes an approach to supply base management that relies on differentiation between categories of suppliers. The objective of this thesis is to illustrate, through a real company's example, how profitability analysis can be combined with more typical supply base management approaches to improve a company's bottom line. The central innovation in the proposed approach is the use of an indication of suppliers' impact on company profits to segment the supply base. Previous work on supplier segmentation uses factors such as amount spent at the supplier and the importance of the purchased products to distinguish between suppliers. This thesis builds upon those approaches by adding an analysis of the profit contribution from the supplier and the cost of managing the supplier. Suppliers that cost a lot to manage and contribute little profit require improvement or become targets for supply base reduction. Suppliers that work to reduce the customer's cost of managing them and contribute positively to the customer's bottom line deserve reinforcement and stand as examples for the rest of the supply base. The approach proposed in this thesis provides managers with a tool to evaluate and improve the profitability and performance of their supply base.
by Joshua R. Binder.
S.M.
M.B.A.
Kunzler, Jayson S. (Jayson Scott) 1973. "Order fulfillment model for medical equipment installation materials." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/89316.
Повний текст джерелаIncludes bibliographical references.
by Jayson S. Kunzler.
S.M.
Sanchez, Joaquin A., Richard A. Nixon, Sergio Chávez, Joaquin A. Sanchez, Richard A. Nixon, and Sergio Chávez. "Medical equipment management through the use of radio frequency identification (RFID)." Thesis, Monterey, California. Naval Postgraduate School, 2004. http://hdl.handle.net/10945/9914.
Повний текст джерелаApproved for public release, distribution is unlimited
MBA Professional Report
Approved for public release, distribution is unlimited
The purpose of this MBA project is to identify the potential value of Radio Frequency Identification (RFID) use in the management of medical equipment at Naval Medical Center San Diego (NMCSD). In doing so, our project seeks to derive potential benefits through the use of RFID technology by comparing a group of medical equipment items that are tracked within NMCSD. The project includes a discussion of additional potential uses of RFID infrastructure within the Military Healthcare System, and possible resulting benefits. Ultimately, the project will determine the financial viability and practicality of implementing RFID.
The purpose of this MBA project is to identify the potential value of Radio Frequency Identification (RFID) use in the management of medical equipment at Naval Medical Center San Diego (NMCSD). In doing so, our project seeks to derive potential benefits through the use of RFID technology by comparing a group of medical equipment items that are tracked within NMCSD. The project includes a discussion of additional potential uses of RFID infrastructure within the Military Healthcare System, and possible resulting benefits. Ultimately, the project will determine the financial viability and practicality of implementing RFID.
Cameron, Nancy G. "Project Management: Collaboration Between Nurse Leaders and Medical Equipment Project Managers." Digital Commons @ East Tennessee State University, 2013. https://dc.etsu.edu/etsu-works/7051.
Повний текст джерелаSegura, Roca Gislé. "Risk Management in MedicalDevices: Hazard Identificationand Verification of MitigationControls." Thesis, KTH, Medicinteknik och hälsosystem, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-272731.
Повний текст джерелаUnder detta projekt, har en riskhantering av medicinsk utrustning som hanterar läkemedel gjorts. Målet med projektet är att utvärdera om utrustningen är säker enligt de svenska bestämmelserna. Komplexiteten med riskhanteringsprocessen, speciellt inom sjukvård, tillsammans med brist på standardiserade metoder för utveckling av dessa typer av processer leder till behov av nya verktyg för att minska tiden, resurserna och komplexiteten i detta skede av utvecklingen. Det är därför två verktyg som har använts och testats för att bedöma lämpligheten under de bestämmelserna för medicinsk utrustnings utvecklingsförhållande: Riskontologin (HO) och felinjektionssystem(FIS). HO är en ny metod som används för att identifiera alla faror och hot för ett identifierat system på ett strukturerat sätt. Å andra sidan är FIS en testteknik vars syfte är att hjälpa att studera systemet när det är under felaktiga förhållande. För att försäkra sig att de svenska bestämmelserna rörande medicinsk utrustning är uppfyllda, har EN ISO 1497 använts som en guide för de metoder som applicerats under projektet. Resultatet av projektet är synligt för varje steg av processen. Till slut, är det huvudsakliga resultatet av riskhanteringsprocessen en lista av de mildrande åtgärder som måste vara inkluderade som säkerhetsspecifikation av utrustningen. Båda verktyg, HO och FIS, har visat sig vara lämpliga med nuvarande bestämmelser och användbara för processen. HO gav oss, som data en lista med de huvudsakliga farorna av systemet och FIS användes i verifieringssteget av de mildrande åtgärder. Tre begränsningsåtgärder att testa med FIS har valts.De åtgärdar de fel för hastighetssensor, en potentiometer och PWM signalen som driver motorn. De begränsningsåtgärderna har verifierats för både PWM-signalenoch potentiometerfelen. Emellertid har ett felaktigt tillstånd som leder till ett osäkert beteende hittats. Därmed visade vi att det medicinska system som studeras fortfarande har många kontrollåtgärder för att genomföra, kontrollera eller förbättra innan det kan sägas att det är en säker medicinteknisk produkt.
Diaconu, Karin-Daniela. "Methods for medical device and equipment procurement in low and middle-income countries." Thesis, University of Birmingham, 2016. http://etheses.bham.ac.uk//id/eprint/7063/.
Повний текст джерелаRemmelzwaal, Bastiaan Leendert. "Technological learning and capacity building in the service sector of developing countries : the case of medical equipment management." Thesis, University of Sussex, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.296618.
Повний текст джерелаLee, Sang-Young. "The role of design in home-based health-care equipment." Thesis, De Montfort University, 2000. http://hdl.handle.net/2086/4807.
Повний текст джерелаLyons, Elizabeth. "An exploration of comfort and discomfort amongst children and young people with severe physical, learning and communication difficulties who depend on postural management equipment." Thesis, Northumbria University, 2013. http://nrl.northumbria.ac.uk/13338/.
Повний текст джерелаGarcia-Villarreal, Enrique. "The critical success factors for original equipment manufacturers within medical technology supply chains in Germany : a case study and action research investigation." Thesis, Loughborough University, 2018. https://dspace.lboro.ac.uk/2134/33529.
Повний текст джерелаRiedberg, Sander. "An assessment of a novel installation procedure of patient moniotoring equipment at New Karolinska Solna." Thesis, KTH, Systemsäkerhet och organisation, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-202208.
Повний текст джерелаPatientmonitoreringsutrustning håller på att utvecklas från mindre, låg-komplexa installation- ssystem mot större, komplexare, system som kräver mycket resurser. Detta har lett till utvecklin- gen av ett nytt installationsförfarande som involverar ett så kallat leveranscenter. Introduktionen av en leveranscenter-baserat installationsförfarande påverkar alla inblandade, och detta exam- ensarbete ämnade att utvärdera hur det leveranscenter-baserade installationsförfarandet upp- fattades av de involverade. Det undersökte också om det existerade grupper bland deltagarna som delar åsikter, och undersökte huruvida leveranscentret borde behållas. Arbetet använde Q-Methodology för att samla in åsikter bland alla de anstälda på Philips som var involverade i installationen av Philips patientmonitoreringsutrustning vid Nya Karolinska Solnas fas 4. Denna studie har visat att alla involverade personer i det leveranscenter-baserade installa- tionsförfarande är positivt inställda till det. Även om signifikanta skillnader bland de studerade grupperna har uppfattats, har en positiv attityd gentemot konceptet med leveranscentret hittats. De specifika områdena kvalitetshantering, miljöpåverkan, arbetsmiljö och effektivitet och uttnyt- jande av resurser har adresserats. Denna studie har också visat att det bland studiedeltagarna finns tre distinkta grupper baserat på åsikter. Grupperna fokuserar på processer, projektplaner- ing och arbetsmiljö. Grupparna har uppvisat egna karaktärsdrag. Förståelse för grupperna och att beakta dem kan troligen göra alla deltagarna än mer positiva gentemot ett framtida lever- anscenter, och även göra det effektivare. Resultaten visar att utifrån deltagarnas perspektiv att ett framtida leveranscenter bör behållas, och det visar även att det finns ett antal områden där det finns utvecklingspotential.
Love, Janine Ann. "Respiratory management of the mechanically ventilated spinal cord injured patient in a critical care unit." Thesis, Nelson Mandela Metropolitan University, 2013. http://hdl.handle.net/10948/d1008451.
Повний текст джерелаFörster, Anna, Ambika Linder, and Sandra Nyqvist. "Konsekvenser av oplanerade verksamhetsavbrott orsakat av fel på medicinteknisk utrustning : En studie inom Länssjukhuset i Kalmar med fokus på drift, säkerhet och kvalitet." Thesis, Linnéuniversitetet, Ekonomihögskolan, ELNU, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-10608.
Повний текст джерелаRosa, Diego Antonio de Oliveira. "Gerenciamento de risco aplicado a procedimentos de ensaios de equipamentos eletromédicos." Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/3/3142/tde-12062013-165607/.
Повний текст джерелаTo better evaluate the medical electrical equipment the laboratories for testing will need to deploy in its management system, the process of Risk Management. This new theme is prescribed in the edition of ABNT NBR IEC 60601-1:2010, which will take effect from 2012 in Brazil. This research aims to show brief the process used to implement the Risk Management procedures for testing medical electrical equipment, to meet the new requirements of the series of ABNT NBR IEC 60601/80601 aiming at continuous improvement of the management systems of laboratories for testing accredited by INMETRO. The method used for the development of this research was the detailed study of two Brazilian editions of the General Standard, Collateral Standards, Particular Standard of infusion pumps and controllers, as well as the ABNT NBR ISO 14971:2009. After studying these Standards, some Risk Management files provided by manufacturers of medical electrical equipment were analyzed and performed the study of some tools used for the development of Risk Management, for example, FMEA, FTA and HAZOP. Trainings were also conducted to the whole laboratory for testing team. With these activities, it was possible to develop and deploy the necessary testing procedures in DEC-LEB/EPUSP and validate procedures for testing. An infusion pump for the validation of these procedures was used, along with all its accompanying documents. The final result was the training of DEC-LEB/EPUSP team for testing as new editions of the standards that incorporate Risk Management in their prescriptions, concluding that laboratories for testing must include appropriate procedures and training of their human resources.
Callerström, Emma. "Clinicians' demands on monitoring support in an Intensive Care Unit : A pilot study, at Capio S:t Görans Hospital." Thesis, KTH, Skolan för teknik och hälsa (STH), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-202541.
Повний текст джерелаPatienter som vårdas på intensivvårdsavdelningar har svikt i ett eller flera organ. Övervakning sker av patienterna för att kunna bidra till den vård som behövs för att upprätthålla ett meningsfullt liv. Idag hanterar sjukvårdpersonal en stor mängd data som genereras från övervakningsutrustning och system förknippade med övervakningsutrustning. Övervakningsparameterar kan antecknas förhand på ett övervakningspapper eller direkt sparas i digitalt format. Parameterarna sparas med syfte att vara ett lättillgängligt underlag under hela intensivvårdsprocessen. Patient data management systems (PDMSs) förenklar hämtning och integrering av data på exempelvis intensivvårdsavdelningar. Innan en ny konfiguration av ett patientdatasystem erhålls, är det eftersträvnadsvärt att intensivvårdsavdelningen analyserar vilken datasom skall hanteras. Detta examensarbete bidrog till kunskap om hur övervakning utförs på en intensivvårdsavdelning, på ett akutsjukhus i Stockholm. Målet med detta examensarbete var att insamla data om vad klinikerna behöver och vilken utrustning och system som de använder idag för att utföra övervakning. Behovsframkallning är en teknik som kan användas för att insamla krav. I detta projekt insamlades data genom aktivaobservationer och kvalitativa intervjuer. Mönster har hittats bland undersköterskornas, sjuksköterskornas och läkarnas behov av teknisksupport från system och utrustning som stödjer sjukvårdspersonalen under övervakningen av en patient. Undersköterskor uttrycker ett behov av att bli avlastade från uppgifter så som att manuellt skrivaner vitala parametervärden. De ifrågasätter behovet av automatiserad datahämtning eftersom de ständigt är närvarande bredvid patienten. Sjuksköterskor beskriver en hög vårdtyngd och önskaratt inte bli tillägnade fler aktiviteter som ökar den vårdtyngden. Läkare beskriver ett behov av ökat stöd för hur en interversion leder till resultat för individuella patienter. Resultaten visar attdet finns information om möjliga kliniska beslutsstöd utan givet sätt att applicera dessa, bättre än de sätt som används idag. Sjukvårdspersonalen hävdar att det det finns ett behov av att utvärdera det kliniska arbetet med hjälp av övervakningsparametrar. Resultaten utgör kunskap om vilka områden som sjukvårdpersonalens behov inte har stöd av nuvarnade verktyg. Resultaten visar att beroende på vilken profession och erfarenhet som sjukvårdspersonalen har, är behoven olika. På intensivvårdsavdelningen sker övervakning då enskilda patienter visuellt observeras såväl som övervakningsparametrar från medicintekniska produkter, resultat från medicinska tester och fysiska examinationer. Det finns behov att integrera och presenterainformation från dessa källor givet kunskap om att sjukvårdpersonalen fattar beslut på dessa som resulterar i behandling, diagnostik och/eller vård.
Faraday, Bruce Douglas History Australian Defence Force Academy UNSW. "Half the battle : the administration and higher organisation of the AIF 1914-1918." Awarded by:University of New South Wales - Australian Defence Force Academy. School of History, 1997. http://handle.unsw.edu.au/1959.4/38693.
Повний текст джерелаRocha, Leticia Santos da. "Sistema de custeio baseado em atividades para gerenciamento do processo de manutenção de equipamentos medico-assistenciais." [s.n.], 2005. http://repositorio.unicamp.br/jspui/handle/REPOSIP/260546.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação
Made available in DSpace on 2018-08-05T12:39:44Z (GMT). No. of bitstreams: 1 Rocha_LeticiaSantosda_D.pdf: 931669 bytes, checksum: a042ec9b535989c70d7e76efd1b732dc (MD5) Previous issue date: 2005
Resumo: O Centro de Engenharia Biomédica (CEB) da Universidade Estadual de Campinas (UNICAMP) gerencia as atividades de manutenção (corretivas e preventivas) de um parque de cerca de 10.000 equipamentos médicos da área de saúde da Universidade, que inclui dois hospitais, dois centros médicos e uma escola de medicina. Para controlar estes serviços, o setor de Engenharia Clínica do CEB possui um sistema de gerenciamento baseado em uma máquina de estados, no qual todas as ordens de serviço (OS) são caracterizadas por trajetórias compostas pelos estados pelos quais cada OS passa durante a sua execução. Os estados são microprocessos ativados para solução de tarefas específicas. Cada mudança entre microprocessos é denominada, neste sistema, transicão. A nossa hipótese de trabalho foi que seria possível implementar no CEB um método de cálculo do custo das OS utilizando a técnica de custeio por atividade (Activity Based Costing, ABC). Para testar esta hipótese, tomamos as atividades (unidades fundamentais para a composição do custo ABC) equivalentes às transicões. Com esta abordagem fomos capazes de extrair o custo ABC das ordens de serviço, calcular o custo dos serviços prestados, exercitar o conceito de lucratividade (simulando valores de venda para cada OS com base no mercado), explicitar os custos das atividades dos indivíduos dentro dos diversos setores do CEB e estudar o impacto sobre o serviço (conjunto de atividades) de um determinado excedente "planejado", mediante o oferecimento de serviços para o mercado. Tendo em vista a possibilidade de calcular lucros para cada tipo de OS, pudemos estudar a aplicação de um processo de decisão, usando a técnica processo de hierarquia analítica (Ana/ytic Hierarchy Process, AHP) para decidir sobre a escolha da manutenção feita por terceiros ou feita pela equipe da casa. Os exercícios de cálculo de custos em diferentes condições ilustram a possibilidade de uso do ABC para gerenciamento baseado em atividade (Activity Based Management, ABM) e resultaram valores compatíveis com a realidade do sistema público universitário de saúde (e.g. custo das OS, custo do trabalho e atividades no CEB). Concluímos que a estratégia adotada de equivalência entre atividades e transições viabiliza e facilita a implementação do sistema ABC (o que confirma a nossa hipótese) e que, tendo em vista os preços praticados no mercado, um excedente da venda de serviço pode ser gerado, mesmo em um sistema público de saúde como o da UNICAMP, no qual os custos, essencialmente fixos (e.g. pessoal, depreciação, custos gerais), não podem ser reduzidos de modo trivial
Abstract: The Center for Biomedical Engineering (CEB) at 8tate University of Campinas (UNICAMP) manages the maintenance activities (corrective and preventive) of about 10,000 medical devices for the health care area of the university, which is comprised by two hospitais, two medical centers and a medicine school. In order to control these maintenance activities, the Clinical Engineering department makes use of a state machine-based management system in which the service orders (80) are characterized by trajectories (sequence of states) constructed while the 80 is processed. The states are microprocesses, which are activated to solve specific tasks. Each transition between two microprocesses (the state transition) is named, in short, a transition. We worked under the hypothesis that it would be feasible to implement at CEB a method for 80 costing based on the Activity-Based Costing (ABC) technique. To test our hypothesis, we made activity, fundamental token for ABC, equivalent to transition. With this approach, we were able to extract the ABC cost of each 80, to estimate cost for a specific service proposal, to exercise the concept of profitability by simulating selling costs for each 80 based in the current market, to explicit activity costs for individual jobs in CEB, and to study the impact of offering external services upon the total amount of activities of a certain "planned profit". By the analysis of 80 involving third party services, we studied the possibility of using the Analytic Hierarchy Process (AHP) technique to choose between third party or in-house services. The different conditions of ABC application in the present work iIIustrated the possibility of using ABC for Activity-Based Management (ABM), with results compatible with the expected figures for a public university health system (which validated our hypothesis). We conclude that our strategy of equivalence between activity and transition made the ABC feasible and relatively simple. We also found that according to the current market prices it is possible to envisage profit even in a health system such as in UNICAMP, in which costs are essentially fixed (e.g. staff, depreciation, general costs)
Doutorado
Engenharia Biomedica
Doutor em Engenharia Elétrica
Stallard, Derek. "A systematic column performance comparison for the confirmation of opioids used in pain management by LC-MS." Digital Commons @ East Tennessee State University, 2014. https://dc.etsu.edu/honors/189.
Повний текст джерелаPiccinini, Patricia Strapasson. "Sistema de informação para gerenciamento de equipamentos médicos-hospitalares." Universidade Tecnológica Federal do Paraná, 2016. http://repositorio.utfpr.edu.br/jspui/handle/1/1870.
Повний текст джерелаThe medical equipment, under sanitary vigilance rules, comprehend all equipment in use in the health field with medical, odontological, laboratorial or physiotherapeutic purpose, which are used either directly or indirectly for diagnosis, therapy, rehabilitation, or monitoring of human beings. The maintenance of these equipment is attributed to the clinical engineering area. The clinical engineering acts on development, management, maintenance and capacitation of medical-hospital equipment (MHE), within the hospital, aiming to contribute to the patients? quality of life. In order to improve the management of these equipment, it has allied with informatics, by means of information systems in the maintenance field. Most of the existing softwares for the hospital area are commercial, expensive and are meant to patients, beds and medical records managing. The existence of informatization systems with the aim of helping maintenance may cut down the time and the cost for this activity. The purpose of this study is to analyze and to implement an information system for managing the maintenance of MHE. This system is 100% Web, multiplatform, and uses a prioritizing method for preventive and corrective maintenance. Customized forms were created for each MHE, aiming the standardization of storage of solutions for each maintenance. For the developing of the system, the Object Oriented Analysis was applied, with techniques of software engineering. The system code was developed using PHP programming language, using a Bootstrap frontend framework and a PostgreSQL database. When the system was ready, software testing methods were created, providing itineraries to test the software?s usability. Comparing to SIGEMH and other softwares on the market, it was found that the majority regards the managing aspects of MHE, while SIGEMH aims the prioritization and standardization of forms relative to maintenance. Some functionalities present in other softwares were not developed, but new functionalities were implemented, such as: storage of technical rules and manuals for online searching, standardization of post-maintenance forms and the method which defines the order of equipment for service execution.
Pelletier, Christine. "Application des techniques d'aide à la décision à la planification sanitaire régionale." Phd thesis, Université Joseph Fourier (Grenoble), 1999. http://tel.archives-ouvertes.fr/tel-00004845.
Повний текст джерелаKAO, CHEN-KAI, and 高振凱. "Establishment of Medical Equipment Management System Based on Equipment Lifecycle Planning." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/2hh325.
Повний текст джерела逢甲大學
生醫資訊暨生醫工程碩士學程
105
The management of medical equipments is a very important part in hospitals. Equipments are usually required for current scientific evidence and medical diagnosis. The equipments must be maintained within a reasonable range of tolerant error such that the value of the equipments could thus be enhanced. The value of the equipments is indispensable in the design of the equipment management process. In the life cycle, there are many aspects that need to be managed. In order to make the management more efficient, the information management system is an indispensable tool. The equipment life cycle includes procurement, installation, operation, maintenance and scrapping. The detailed item includes budget review, applicable evaluation, purchase bargaining, medical evaluation, acceptance file, daily inspection, bad notification, use survey, instrument maintenance, instrument calibration, maintenance, the obsoleteness assessment and waste disposal. The management of medical equipments is the complete life cycle of equipments presented. The equipment life cycle is very important for the planning direction of the information management system. The information management system has many design considerations, including equipment procurement evaluation, equipment property, equipment function classification, equipment risk classification, supplier, maintenance planning, quality control planning, equipment scrap, and so on. In addition, if the communication of information can be built in multiple subsystems, the management can be improved to be more effective and more convenient. The e-process management can also be completed gradually. This paper takes the performance quality of the equipments in hospital as the first priority. The operation design and the performance appraisal for the e-process management have been accomplished in this thesis. With the management of hospital equipments, achieves the efficiency in management and the reduction of management mistake have been achieved. The finished system may also manifest the equipment quality report for the users and achieve the win-win goal of the users and the equipment manager.
Chien, Chia-Hung, and 錢嘉宏. "A Web-based Medical Equipments Management Based on Equipment Service Life-Cycle Model." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/29677058197702365487.
Повний текст джерела國立臺灣大學
電機工程學研究所
99
In the hospital, management of medical equipments is a series of activities from budget planning to equipment disposing. The overall activities focus on issues such as quality, safety, performance, cost, and profit. An efficient and effective management system is necessary for supervising these goals. In this study, we show how to use a low cost web-based information model based on equipment life-cycle to finish the job. The operations information of medical equipment can be systematic collected and revealed at different life-cycle stages. Audit indicators are used to continually monitoring real operation conditions and improve related adverse events. Through this mechanism, the management integrity, medical care quality, and patient’s safety will be improved. This system consists of four sections namely; the surveillance of maintenance quality, the central regulatory, the utilization benefit, and its emergency response. Quick and effective decision marking becomes possible by useful operating status from the analysis and supervising of quality control, user satisfaction survey, utilization rate, and revenue contribution provided by the system. The framework of this model has worked well in the NTUH by the increase in availability and efficiency of equipments used.
Yao-Tsung, Tao, and 陶耀宗. "Study of Computerized Maintenance and Management Systems for Medical Equipment in Medical Centers." Thesis, 2005. http://ndltd.ncl.edu.tw/handle/01549142290403427381.
Повний текст джерела南台科技大學
高階主管企管碩士班
93
Medical equipments appear in different forms in hospitals, depending on the level of technical development. From this point of view, it is essential to build up management systems for the equipment, and computerized maintenance appears to be the best way. In Taiwan, medical centers hold the leading position. The effects of developing computerized system have been positive. However, the obtained computerized system which controls medical equipment maintenance still attains weaknesses, and this study is focused on the problem of medical equipment maintenance and the building of a computerized maintenance system for obtaining complete functioning of the whole system. In the study, we examine the experience of one medical center in southern Taiwan and find that its implementation of a computerized medical equipment maintenance system contains many shortcomings and it’s further improvement remains to be an on-going challenge. We found that the key factors to success are the management skill and attitude of the medical engineering specialists. Because most hospitals ignore the importance of computerization, the medical engineering specialists need to play an active role to implement a computerized system and realize the benefits of the system. This study also deals with important issue of how specialists need to focus on, not only the technical task, but also their management skill. Performance efficiency is resulted from good management skill. Since the computerized system is an essential management tool, it is necessary to enhance the specialists’ knowledge of statistics and computer science to strengthen their management ability. It is advised that specialists do not rely solely on their technical skills, but also remember the importance of good management, since special skills are most effective when used in cooperation with good management.
Wang, Yi-Ya, and 王怡雅. "The Development of Mobile APP for Medical Equipment Maintenance Management System." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/46yccy.
Повний текст джерела中原大學
生物醫學工程研究所
106
The motivation in this research is to develop a medical equipment mobile APP maintenance management system based on Android. This APP provide a portability platform for biomedical engineers gain access the information about the medical devices maintenance services and monitoring tools at point of care. Prior to the development of mobile platform, it strived to improve the work efficiency of biomedical engineer in the hospital. This system also provided wellspring of resources such as ability to download troubleshooting PDF and instruction manual for 5 different kinds of identity. The ease for the user to gain access instruction manual at their fingertips by eliminating troubleshoot can thereby reduce the amount of instrument to be repaired effectively. Moreover, the system has suited the needs of domestic hospitals through the study of evaluation. Biomedical can now interpret the reason behind the faulty devices based on the statistical analysis evaluated by the system and helping relevant hospital and manufacture personnel to improve the medical devices usage method with minimal malfunction rate, in thereby, improve the overall work efficiency of the hospital. According to different type of user, they have limited authorization to gain access the certain section of medical devices management system such as application of maintenance, maintenance record, pie chart analysis based on device failure, preventative of device failure, three-level services records, vendor service sector, instruction manual, troubleshooting and feedback evaluation. In order to fulfill the demands of “JCT Foundation Hospital Evaluation and Medical Quality Policy Council” and “Medical Unit Operations”, the whole system is developed from the field trip research in hospital since March of 2017.
Dennis and 陳博言. "Characteristics of medical institutions and sales management research - the Taiwan medical equipment industry case studies." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/39420262734392605663.
Повний текст джерела輔仁大學
國際創業與經營管理學程碩士在職專班
94
Because the Taiwan medical establishment by the Health of Department comments the graduation system, but has the medicine center, the region and the local hospital three kind of medical establishment type. This different medical establishment type has the different purchase characteristic according to the health bureau request standard. The medical supplier really has the essential ponder different sale management pattern reason to be supposed this different purchase characteristic, this also is a subject which this research wants to discuss. This research goal is needs to discuss the medical supplier, between in which sale management and the different medical establishment's difference, but analyzes induces suits the different medical establishment type the sales management pattern. Firstly, case company regarding medicine center, region and local hospital altogether six hospital cases by case analysis way, purchase characteristic and between sales management pattern this two construction surface compared with different type hospital difference. Finally, and develops the proposition, proposes the conclusion and the suggestion. Because the health bureau comments differently to the different equipment demand characteristic, therefore has the medicine center to stress studies the medical level, has stresses the general medical service the region hospital, also has stresses basic unit of area hospital the primary medical service. Furthermore, different has the different organization scale and the purchase behavior characteristic and the referential target significance because of the medical establishment. Therefore the case company uses different sales management because of the different medical establishment characteristic. This research expectation establishes one to conform to the different medical establishment type sales management pattern, refers for the medical supplies of same business.
羅美緣. "A Study on The ISO Quality Knowledge Management System of Medical Equipment Industry." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/35502295186147240430.
Повний текст джерела國立彰化師範大學
資訊管理學系所
102
In a trends for knowledge economy, as well as the development of information and communication technology, and highly applications era, every business organizations have to face rapidly changing, diverse and complex, and competitive business environment. Many business organizations also have deep sense "knowledge" is the most important strategic assets and core values is one of the main sources of competitive advantage. "Knowledge Management" is to respond effectively to rapidly changing market conditions and intense competition in the only way, in particular, the effective use of information technology will enable business organizations intangible knowledge assets liquidity "expertise" to make effective management, and accelerated transformed core value of the weapon and strategy, the market maintain a competitive advantage and sustainable development key elements. Medical equipment industry as the most popular and important one of the biotech industry, and medical equipment with people's health, health and life more fairly close and important relationship, quality management system is to maintain product quality and the most direct key role. In practice, the use of information technology, building industry characteristics meet ISO quality and effective knowledge management system is to enhance and maintain quality assurance professional core knowledge and skills the most direct and effective way, but also can not be ignored and the current urgent important work, but also in order to enhance the production of medical equipment, performance and competitiveness. Based on the above key demand, the research mainly discusses the construction of medical devices industry ISO quality knowledge management system. The research on the use of literature analysis and prototyping system design method, first through literature review to understand the ISO quality management system standard operation procedures and mechanisms for knowledge management and knowledge management systems develop successful models; then medical equipment industry ISO Quality Management System characteristics and related quality assurance expertise based knowledge management through acquisition, storage, sharing, application and creation of knowledge management processes such as the five concepts and methods of import, the final application of information technology actually construct a set of effective, safe medical equipment industry needs to "ISO quality knowledge Management system" for validation. The results showed that the ISO quality knowledge management system has to provide business organizational quality knowledge management, information support of case and statistical analysis, customers and suppliers management, online education and training, internal and external expertise to obtain and community sharing features such benefits. The results not only provide medical equipment industry in the assess and development for quality knowledge management systems as a reference, while the quality knowledge management system functionality and research of integration support systems were also helpful.
JEN, CHUNG CHIEH, and 任中杰. "Risk Management, Taxation Plan And Entrance Approaches for Aesthetic Medical Equipment in China." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/17243852063935948098.
Повний текст джерелаYu, Jui-Hsiang, and 余瑞祥. "An Application of RFID Technology to Medical Equipment Management-Example of A Public Hospital." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/93389697889991835137.
Повний текст джерела元智大學
資訊管理學系
94
Since the implementation of the National Health Insurance System (NHIS) in 1995, versatile healthcare services have been offered to the public. However, in recent years, because of the financial difficulty, the Bureau of National Health Insurance has adopted several control methods such as total amount of expenditure and self-initiated program in order that NHIS can be operated under planned budget. Those actions have created severe impacts on normal operations for the local medical facilities; that is, high profit era can no longer appear. Especially for the public medical facilities, they have more restrictions imposed by the law, so they can not freely manipulate their funds like other private medical facilities. In addition, they are also facing the decrease of the government budget year by year and the trend of downsizing the personnel. Consequently, top management level of each public medical facuility has to figure out ways for example how to effectively use advanced technology on managing medical related operations in order to save on costs. Recently, the RFID technology has been successfully applied on several fields such as warehouse management, safety management, asset management, and so on. This thesis is to study the relevant costs occurred before and after the implementation of the RFID technology in managing high price medical equipments. Our purpose is to see whether it is profitable for introducing RFID into medical assest management. After analyzing possible sources of relevant cost, we conducted some field experiments using RFID to collect required data. Analysis based on experiment results demonstrate that using RFID technology in medical equipment management can not only decrease the relevant handling costs, but also increase the medical quality in terms of the avoidance of interferring in-patients and the enhancement of the privacy for in-patients.
Bliznzkov, Zhivko. "Methodology for a global approach and development of an integrated system for medical equipment management." Thesis, 2003. http://nemertes.lis.upatras.gr/jspui/handle/10889/3371.
Повний текст джерелаHsu, Hao-Kun, and 許浩堃. "Development of a Mobile Tracking and Management System for Medical Equipment Based on 12-lead ECGs." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/7m77q4.
Повний текст джерела臺北醫學大學
醫學資訊研究所
104
As wireless LAN technology matures,the use of Mobile Medical Equipment Tracking Management system is worth exploring.This article sets to use a medical tracking management system for tracking on mobile medical equipments.As long as Medical equipment tracking management system is on wireless LAN and connected to the terminal of the wireless base,the position of the medical device can be tracked.Therefore there is no need for extra software or hardware installation as long as there is signal for uploading.The user can use this tracking management system to obtain the location and receive information they need.Our article suggest this Mobile Medical Equipment Tracking Management system is both beneficial to administrator and other personal use.
Lei, Meng Ru, and 雷孟儒. "A Study on Channel Management Strategy for Biotech &Medical Equipment Industry – The Case Study of the X Distributor." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/80333569077970490438.
Повний текст джерела國立中正大學
高階主管管理碩士在職專班
102
Abstract In recent years, the development trend of the medical equipment industry is significant, The authorities actively promoted the biotech medical equipment, set the resource integration platform,and made a cross-sectorial coordination in order to construct a better environment for industrial development. The implementation of National Health Insurance (NHI) and the increase of national income accelerated the needs of medical market.However, the consumer consciousness and the development of internet age resulted in the great challenge for medical equipment manufacturers to face the transformation of market and management strategies. This study aimed to investigate the current products which are actively developed and the key factors of future success for medical industry,including the exploration of the distribution channel management of medical equipment industry. Through the enterprise’s channel strategies,the researcher aimed to understand how to create value from the channels and promote the exchange of products. Besides, the enterprises coordinated the supply and demand to offer more choices for the consumers. Lastly, the study aimed to analyze the consuming behavior in the market and understand consumers decision –making from their shopping habits, preference and various choices This study adopted the case study analysis.In consideration of the medical industry transformation, the implement of National Health Insurance (NHI), the distributors’ channels and product competition, and the management among consumer, the case distributor concluded the major problems from interior and exterior environments. Through the interview with higher-ranking managers, the researcher aimed to under-stand the company’s decision-making factors. The case company framed the goals of their future channel management strategies in consideration of the strength and weakness of the interior and the threat from the exterior environment. The results were as follow. They are the diversification of products, the professional employee training,expansion of working capital financing strategy, the alliance of marketing channel management, the reposition of customers’ relations, and the integration of upstream and downstream companies. Above all , the goal is to enhance the management performance and their competitiveness. The scales of domestic medical markets were small, and many companies belong to small and medium sized business. Based on results, the researcher trys to change the predicament of the case company, and help the company to achieve the goal of sustainable development.
Liu, Pu Cheng, and 劉卜誠. "Design and Implementation of a Clinical Trial Management System for Assisting the Development of Intelligent Medical Devices and Equipment." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/17044565699715844984.
Повний текст джерела長庚大學
工業設計研究所
97
Medical Devices and equipments have longer lifecycle than normal industrial products, that is because medical Devices and equipments needed to pass through lots of laboratory evaluation. These test including safety test, function test, and clinical trial. Medical Devices and equipments have direct and close relationship to the users, and it might cause great danger without notice. Therefore Department of Health takes it seriously to verification. Expensive cost and uncertain margin for stockholders will be the disadvantage due to the property of such a long lifecycle, so this study first focus on discussing lifecycle of Medical Devices and equipments, and how to brief the step through system implementation. This study focused on the process of clinical trail starting from IRB application, project management, and ending by data collection. The aim is to establish a complete vital data database to represent the core value of how clinical trial system assists the development of intelligent medical devices and equipment. System prototyping in the chapter 4, and the case study in the chapter 5. The case study shows some benefits. The application system not only provides the benefit for shorten the process (compared with traditional IRB application), but also provides assistant service in the process of application. During the project, project management functions properly and accurately to guarantee the quality of project. In the end of test project, the system will not only function automatically to collect data from multiple intelligent medical devices but also output an online questionnaire, which is designed for collection of users’ opinion, for accomplishment of the final report. The further system should implement to original medical devices, and the information safety should be discussed when subjects involved. To make sure the whole process will not against the medical ethics.
Chen, Mei-Yun, and 陳美雲. "The Study of The Key Success Factor for The Risk of Management - In the case of Taiwan Medical Equipment Supplier." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/08334426337744343482.
Повний текст джерела淡江大學
管理科學學系企業經營碩士在職專班
100
While the national economy standards increase gradually in the overall gross national product (GDP) growth and the health relative measures gradually improved, and progress, the population is showing aging phenomena. Thus, it shows increasingly high requirements for the quality of medical care and health care needs. Taiwan’s manufacturer structure of the overall market economy is smaller, inadequate funding of clinical research, so most of the business emphasis on home health care medical equipment manufacturing and most of them are OEM manufacturing mode. Hence, it is unable to grasp the key technologies and materials with only a few brands and the domestic market is small. Therefore, actively introduce international brands of medical technology, medical equipment, high-quality, product diversification, etc., to provide people better care and protection is the trend of the future. Since the implementation of universal health insurance system, the Bureau of National Health Insurance replace the public civilians became the major paying customer of the medical institutions. This completely changed the business ecosystem of hospitals. Adjustment of the Bureau of National Health Insurance system will result in their environment-related medical equipment, instruments industries upstream and downstream firms have to change, whether in this stage revenue or future level of business strategy are producing dramatic changes and the increase in complexity between firms. This study focuses on the case of a company in the process of change in the domestic medical equipment industry related risk factors discussed information analysis to collect the relevant information of the medical devices industry, and establish an internal process improvement, the introduction of staff training and domestic and foreign new product imports. Designed based on the relevant subject headings in-depth interviews to be confirmed, to ensure that the enterprises to be sustainable.
Fei, Kuang-Ming, and 費廣明. "The Influences of Supplier Relationship Management on Information-based Purchasing-Using the Pharmaceutical and Medical Equipment Industry in Central Taiwan as example." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/86hf32.
Повний текст джерела靜宜大學
管理碩士在職專班
94
Supplier Relationship Management (SRM) has been an oncoming territory in Business Administration, transforming from an indistinct concept, since the information-based of supply chain management in the past few years. This is a part of the automation of commerce and related technological processes to evaluate the implementation of the contact. Looking backward to the researches about SRM, we come to discover that the research results have turned aside to the relationship management between both customers & supplier and upstream & downstream business, but seldom focus on the topics of how to achieve the purchasing value thru SRM in the pharmaceutical and medical equipment industry. The objective of this research is to show the relationship between SRM and efficiency of purchasing. Based on the analysis, long-termed partner relationship, integration of the information system, involvement of the supplier and the consistent factors all have a positive effect on electronic purchasing value. If we cannot resolve the inefficiency that caused by the integration of the information system of the dealers and suppliers, then we cannot amplify the value of electronic purchasing. So we suggest that pharmaceutical and medical equipment dealers should choose those suppliers who has the converged quality concept with the dealers and willing to has a long-termed cooperate relationship, thus we can achieve the purchasing value thru the integration of the information system and elevating the exclusive investing degree of the supplier.
Palmeira, Luísa Rodrigues Palma Rato. "Scenario Planning and Multicriteria Analysis in the acquisition of a sophisticated medical equipment: The Case of Instituto Português de Oncologia." Master's thesis, 2016. http://hdl.handle.net/10362/22041.
Повний текст джерелаSantos, Tiago Jorge Cavaco dos. "Organization and management of maintenance indexed to risk factors in healthcare environment." Master's thesis, 2016. http://hdl.handle.net/10400.26/18443.
Повний текст джерелаBreen, Liz, Y. Xie, and T. Cherrett. "Where are you? A preliminary examination of the track and trace mechanisms in place to facilitate effective closed-loop medical equipment retrieval in the National Health Service (NHS) (UK)." 2016. http://hdl.handle.net/10454/8664.
Повний текст джерелаThe National Health Service (UK) is wholly accountable and heavily scrutinised for its strategy, activity, performance and spending (Appleby, 2016; NHS Confederation, 2016; Parliament UK, 2010), and much research has been undertaken as to its effectiveness at managing its operations and its competency in doing so (Gov.Uk, 2016; National Audit Office, 1999)). The impact of not performing adequately combined with threats such as funding cuts (King’s Fund, 2016), government intervention and private sector competition; has led to uncertainty and disillusion with the sustainability of the service (Hunter, 2016). Based on current economic concerns, this paper chooses to focus on the area of Medical Equipment Loans Services where products are released to patients to aid therapeutic rehabilitation and physical mobility. The aim of this study is to examine the process of product retrieval in a multi-case study analysis and consider how value-added technologies can be used to improve retrieval success rates.
Chen, Ya-Fang, and 陳雅芳. "The Influence of Human Resources Management on Organizational Commitment from the Social Exchange Perspective - An Empirical Study of Sales Representatives in the Medical Equipment Industry." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/52594328899498706495.
Повний текст джерела國立成功大學
高階管理碩士在職專班
97
The purpose of this study was to explore the impact of human resource management, trust, and responsibility on organizational commitment. “People” is the most important asset of enterprises. Enterprises need to utilize the effectiveness of human resource to enhance their competitiveness and further maintain their profitability, growth, and sustainability. Organizational commitment can be used to predict employee’s job performance and turnover behavior and serve as an indicator of organizational effectiveness. The relationship between job performance and organizational commitment has been studied in many previous studies. However, this relationship has been seldom investigated from the perspective of the social exchange theory. Therefore, this study was designed to examine whether human resource management influences organizational commitment through the mediation of trust and responsibility as mentioned in the social exchange theory. The research subjects were sales representatives in the medial equipment industry. Of the 260 questionnaires distributed, 215 were returned, and 201 were valid. The valid response rate was 77.3%. The collected sample was analyzed using descriptive analysis, confirmatory factor analysis, reliability analysis, and structural equation modeling. Empirical results showed that all the proposed hypotheses were supported. Therefore, training and motivation in human resource practices as well as trust and responsibility in the social exchange theory all have significant and positive influence on organizational commitment. Trust and responsibility, in particular, are important mediators. Through trust and responsibility, enterprises can enhance the influence of human resource practices on organizational commitment. Thus, the important function of the social exchange theory in corporate organizations was reaffirmed. This was another contribution of this study.
Nierste, Michael Keith. "Knowledge Management For Quality Improvement of Service Methods - A Case Study of a Laboratory Instrument." Thesis, 2010. http://hdl.handle.net/1805/2149.
Повний текст джерелаAmaral, Vanessa Alexandra Duarte Tavares. "A gestão de risco em procedimentos cirúrgicos de urologia: os eventos adversos com equipamentos médicos em equipas cirúrgicas." Master's thesis, 2010. http://hdl.handle.net/10071/3952.
Повний текст джерелаMedical equipment has now become a crucial component in the provision of health care. Not only have contributed to improving the diagnosis and treatment of various diseases, thus enhancing the extraordinary development of medical science and its many specialties, but have also contributed to levels of complexity and risk increasing. At a time when patient safety, or the consequences of the lack of it, stands out as an issue of crucial concern worldwide, understand the role that medical equipment play in this field emerging of great importance. In this sense, it was intended with this study to understand the occurrence of adverse events in the operating room and understand their origins with a focus on the technological dimension. To better understand this reality, this study has also addressed the aspects of organizational culture and team culture. It was adopted as the research methodology case study, selecting two surgical procedures in urology at the Centro Hospitalar Lisboa Norte. As a method of data collection was adopted interviews and direct observation and the data were analyzed using content analysis. It was concluded that the breakdown of medical and surgical equipment is the symptom of effective organizational dysfunctions. Fatigue, distraction or lack of attention and lack of communication between the surgical team were the key problems and root problem identified. It's about these potential causes of accidents should focus on measures to improve, seeking a consequent reduction of adverse events and improving the delivery of health care
Wei, Yuh Fen, and 魏毓芬. "Purchase Decision Making and Management of Precious Medical Equipments." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/91752664972990674449.
Повний текст джерела國立清華大學
工業工程與工程管理學系
104
With the raising awareness of disease prevention and healthcare as well as the popularization of social security, people in Taiwan tend to seek for higher quality of medication. For these reasons, more selections of medical treatments appeared to fulfill the mass. Due to the competitive pressure, hospitals have not only improved their service and medical technology, but also many new and valuable equipment were invested and introduced to medical treatments. According to the statistics of National Health Insurance Administration (NHI) for high capital expenditure equipments including CT (Computerized Tomography) and MRI (Magnetic Resonance Imaging) stands for the largest proportion of our health insurance expense and is increasing annually. Despite that NHI has establish the policy of global budget system to raise the payment condition, hospitals still regularly eliminate and purchase valuable equipment at no cost in order to meet the needs of medical treatment and to improve the accuracy of medical detective rate. For this way, hospitals can not only gain the trust of people but also mainly to increase their revenue in a more rapid way and balance between expenditure. There are great varieties of medical equipment in a hospital and many of them are valuable equipment. Every year, great amount of budget will be spent on the purchase of new equipment and signing maintenance contracts. Up to now, few thesis focus on the management or the decision making of purchasing medical equipment. This study aims to apply the concept of Total Resource Management (TRM) to build up the structure of resource managing and the decision making of investing medical equipment in hospitals. By PCDA cycle, we can continuously control the efficiency of valuable equipment upon its clinical usage. Medical departments can promptly adjust their strategies of resource using and improve their services and furthermore, to evaluate the right timing for purchasing valuable equipment. Then, we will focus on the overall benefit evaluation for MRI machines in a specific regional hospital. By applying Simple Multi-Attribute Ranking Technique (SMART) in UNISON Decision Analysis Framework, we are able to analyze the purchase of new machines in a more systematic way. Form this study, we will find out positive effects for valuable equipment management as well as improving the quality of medical treatments in the hospitals to increase competitiveness.
KŘIVÁNKOVÁ, Petra. "Logistické zajištění zdravotnického zásahu v místě hromadného neštěstí." Master's thesis, 2007. http://www.nusl.cz/ntk/nusl-54746.
Повний текст джерела