Добірка наукової літератури з теми "Mechatronics and robotics not elsewhere classified"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Зміст
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Mechatronics and robotics not elsewhere classified".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Mechatronics and robotics not elsewhere classified"
Luo, Zewei, Xiaotong Hu, Xiyue Tian, Chen Luo, Hejun Xu, Quanling Li, Qianhao Li, et al. "Structure-Property Relationships in Graphene-Based Strain and Pressure Sensors for Potential Artificial Intelligence Applications." Sensors 19, no. 5 (March 12, 2019): 1250. http://dx.doi.org/10.3390/s19051250.
Повний текст джерелаNakazawa, Masaru. "Special Issue on Handling of Flexible Object." Journal of Robotics and Mechatronics 10, no. 3 (June 20, 1998): 167–69. http://dx.doi.org/10.20965/jrm.1998.p0167.
Повний текст джерелаOkuno, Hiroshi G., and Kazuhiro Nakadai. "Special Issue on Robot Audition Technologies." Journal of Robotics and Mechatronics 29, no. 1 (February 20, 2017): 15. http://dx.doi.org/10.20965/jrm.2017.p0015.
Повний текст джерелаYulfita, Ade Febri, and Ferry Herdianto. "DESKRIPSI DAN INTERPRETASI TEKNIK PERMAINAN INSTRUMENT MARIMBA CONCERTO IN G MAJOR RV DAN A WHOLE NEW WORLD." Gorga : Jurnal Seni Rupa 11, no. 1 (June 30, 2022): 60. http://dx.doi.org/10.24114/gr.v11i1.34428.
Повний текст джерелаRamašauskas, Olegas, Ilona Rupšienė, and Mantas Kazlauskas. "Digital filters creation of seabed image processing." Lietuvos matematikos rinkinys 56 (December 20, 2015). http://dx.doi.org/10.15388/lmr.b.2015.21.
Повний текст джерелаДисертації з теми "Mechatronics and robotics not elsewhere classified"
Leitner, Jürgen. "From vision to actions: Towards adaptive and autonomous humanoid robots." Thesis, Università della Svizzera Italiana, 2014. https://eprints.qut.edu.au/90178/2/2014INFO020.pdf.
Повний текст джерела(9839792), Peter Thomas. "Evolutionary learning of control and strategies in robot soccer." Thesis, 2003. https://figshare.com/articles/thesis/Evolutionary_learning_of_control_and_strategies_in_robot_soccer/13423691.
Повний текст джерела(9834113), Suryamani Sharma. "Acoustic detection of flying vertebrate pest in fruit orchard: Case study of lorikeets." Thesis, 2018. https://figshare.com/articles/thesis/Acoustic_detection_of_flying_vertebrate_pest_in_fruit_orchard_Case_study_of_lorikeets/13445555.
Повний текст джерела(9876422), I. Sadasiva. "A real time code generator for power electronic applications and implementation of PWM converter control strategies." Thesis, 2002. https://figshare.com/articles/thesis/A_real_time_code_generator_for_power_electronic_applications_and_implementation_of_PWM_converter_control_strategies/13429301.
Повний текст джерела(9809531), Patrick Keleher. "Adaptive and sliding mode control of articulated robot arms using the Liapunov method incorporating constraint inequalities." Thesis, 2003. https://figshare.com/articles/thesis/Adaptive_and_sliding_mode_control_of_articulated_robot_arms_using_the_Liapunov_method_incorporating_constraint_inequalities/21721025.
Повний текст джерелаIn this thesis we investigate the control of rigid robotic manipulators using robust adaptive sliding mode tracking control. Physical state constraints are incorporated using a multiplicative penalty in a Liapunov function from which we obtain analytic control laws that drive the robot's endeffector into a desired fixed target within finite time.
(10716315), Vaibhav Kailas Ahire. "PHYSICS-BASED DIESEL ENGINE MODEL DEVELOPMENT CALIBRATION AND VALIDATION FOR ACCURATE CYLINDER PARAMETERS AND NOX PREDICTION." Thesis, 2021.
Знайти повний текст джерелаStringent regulatory requirements and modern diesel engine technologies have engaged automotive manufacturers and researchers in accurately predicting and controlling diesel engine-out emissions. As a result, engine control systems have become more complex and opaquer, increasing the development time and costs. To address this challenge, Model-based control methods are an effective way to deal with the criticality of the system study and controls. And physics-based combustion engine modeling is a key to achieve it. This thesis focuses on development and validation of a physics-based model for both engine and emissions using model-based design tools from MATLAB & Simulink. Engine model equipped with exhaust gas circulation and variable geometry turbine is adopted from the previously done work which was then integrated with the combustion and emission model that predicts the heat release rates and NOx emission from engine. Combustion model is designed based on the mass fraction burnt from CA10 to CA90 and then NOx predicted using the extended Zeldovich mechanism. The engine models are tuned for both steady state and dynamics test points to account for engine operating range from the performance data. Various engine and combustion parameters are estimated using parameter estimation toolbox from MATLAB and Simulink by applying least squared solver to minimize the error between measured and estimated variables. This model is validated against the virtual engine model developed in GT-power for Cummins 6.7L turbo diesel engine. To account the harmonization of the testing cycles to save engine development time globally, a world harmonized stationary cycle (WHSC) is used for the validation. Sub-systems are validated individually as well as in loop with a complete model for WHSC. Engine model validation showed promising accuracy of more than 88.4 percent in average for the desired parameters required for the NOx prediction. NOx estimation is accurate for the cycle except warm up and cool down phase. However, NOx prediction during these phases is limited due to actual NOx measured data for tuning the model for real time NOx estimation. Results are summarized at the end to compare the trend of NOx estimation from the developed combustion and emission model to show the accuracy of in-cylinder parameters and required for the NOx estimation.
(10725198), Yi Yang. "Electromechanical Characterization of Organic Field-Effect Transistors with Generalized Solid-State and Fractional Drift-Diffusion Models." Thesis, 2021.
Знайти повний текст джерелаThe miniaturization and thinning of wearable, soft robotics and medical devices are soon to require higher performance modeling as the physical flexibility causes direct impacts on the electrical characteristics of the circuit – changing its behavior. As a representative flexible electronic component, the organic field effect transistor (OFET) has attracted much attention in its manufacturing as well as applications. However, as the strain and stress effects are integrated into multiphysics modelers with deeper interactions, the computational complexity and accuracy of OFET modeling is resurfacing as a limiting bottleneck.
The dissertation was organized into three interrelated studies. In the first study, the Mass-Spring-Damper (MSD) model for an inverted staggered thin film transistor (TFT) was proposed to investigate the TFT’s internal stress/strain fields, and the strain effects on the overall characteristics of the TFT. A comparison study with the finite element analysis (FEA) model shows that the MSD model can reduce memory usage and raises the computational convergence speed for rendering the same results as the FEA. The second study developed the generalized solid-state model by incorporating the density of trap states in the band structure of organic semiconductors (OSCs). The introduction of trap states allows the generalized solid-state model to describe the electrical characteristics of both inorganic TFTs and organic field-effect transistors (OFETs). It is revealed through experimental verification that the generalized solid-state model can accurately characterize the bending induced electrical properties of an OFET in the linear and saturation regimes. The third study aims to model the transient and steady-state dynamics of an arbitrary organic semiconductor device under mechanical strain. In this study, the fractional drift-diffusion (Fr-DD) model and its computational scheme with high accuracy and high convergence rate were proposed. Based on simulation and experimental validation, the transconductance and output characteristics of a bendable OFET were found to be well determined by the Fr-DD model not only in the linear and saturation regimes, but also in the subthreshold regime.
(8796875), Dana L. Moryl. "A STUDY ON APHONOPELMA SEEMANI BIOMECHANICS OF MOTION WITH EMPHASIS ON POTENTIAL FOR BIOMIMETIC ROBOTICS DESIGN." Thesis, 2020.
Знайти повний текст джерелаWith a stable center of mass, pneumatic-aided movement, and the ability to scale multiple terrain types, the uniquely efficient and lightweight form of spiders has changed the way we think about robotic design. While the number of papers on arachnid biomechanics and spider-based biomimetic robots has been increasing in recent years, the style of analysis and the motion-types analyzed have barely changed since the 1980s. Current analyses are based on a force plate and treadmill design, in which the spider is induced into an escape run. This environmental change can affect the movements of the spider. Here I propose a novel method of testing the biomechanical and kinematic properties of spiders using a tank with a built-in sensor matrix which allows for a more natural environment for the specimens and provides force data from individual legs. The system detects a minimum force of .0196 N and has a sampling rate of 1,000 samples /second, which allows for the analysis of forces during the step. Aphonopelma seemanni, a tarantula commonly used in such research, but whose forces during movement have to date not been analyzed, was recorded walking across the matrix, and the forces, step patterns, joint angles, and center of mass deviations were recorded. Walking indicated significantly different step pattern traits than current literature, and forces per leg (.07281 N±.0235) recorded were much smaller than expected in comparison to other spiders. Statistical analysis also indicated no changes in walking movement over a range of temperatures, which also varies from literature. These findings indicate that further research on spiders should be done with respect to walking gaits in order to improve upon current biomimetic models.
Mastilovich, Nikola. "Automatisation of programming of a PLC code : a thesis presented in partial fulfilment of the requirements of the degree of Masters of Engineering in Mechatronics." 2010. http://hdl.handle.net/10179/1681.
Повний текст джерелаA competitive edge is one of the requirements of a successful business. Tools, which increase an engineer s productivity and minimize cost, can be considered as a competitive edge. The objective of this thesis was to design, create, and implement Automatic PLC Code Generator (APCG) software. A secondary objective was to demonstrate that the use of the APCG software will lead to improved project efficiency and enhanced profit margin. To create the APCG software, the MS Excel and Visual Basic for Applications (VBA) programs were used as the platform. MS Excel sheets were used as a user interface, while VBA creates the PLC code from the information entered by the engineer. The PLC code, created by the APCG software, follows the PLC structure of the Realcold Milmech Pty. Ltd, as well as the research Automatic generation of PLC code beyond the nominal sequence written by Guttel et al [1]. The APCG software was used to design and create a PLC code for one of the projects undertaken by Realcold Milmech Pty. Ltd. By using APCG software, time to design, create, and test the PLC code was improved when compared to the budgeted time. In addition, the project's profit margin was increased. Based on the results of this thesis it is expected that the APCG software will be useful for programmers that tend to handle a variety of projects on a regular basis, where programming in a modular way is not appropriate.
(8647860), Aniket Pal. "Design and Fabrication of Soft Biosensors and Actuators." Thesis, 2020.
Знайти повний текст джерелаOne of the largest application of soft materials has been in the field of flexible electronics, especially in wearable sensors. While wearable sensors for physical attributes such as strain, temperature, etc. have been popular, they lack applications and significance from a healthcare perspective. Point-of-care (POC) devices, on the other hand, provide exceptional healthcare value, bringing useful diagnostic tests to the bedside of the patient. POC devices, however, have been developed for only a limited number of health attributes. In this dissertation I propose and demonstrate wireless, wearable POC devices to measure and communicate the level of various analytes in and the properties of multiple biofluids: blood, urine, wound exudate, and sweat.
Along with sensors, another prominent area of soft materials application has been in actuators and robots which mimic biological systems not only in their action but also in their soft structure and actuation mechanisms. In this dissertation I develop design strategies to improve upon current soft robots by programming the storage of elastic strain energy. This strategy enables us to fabricate soft actuators capable of programmable and low energy consuming, yet high speed motion. Collectively, this dissertation demonstrates the use of soft compliant materials as the foundation for developing new sensors and actuators for human use and interaction.