Добірка наукової літератури з теми "Maximum Tension"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Maximum Tension".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Maximum Tension"
Denis Lavnikevich. "MAXIMUM TENSION." Current Digest of the Russian Press, The 72, no. 008 (February 23, 2020): 12. http://dx.doi.org/10.21557/dsp.58098897.
Повний текст джерелаAhern, Tom. "Maximum tension palatoplasty." Journal of Equine Veterinary Science 25, no. 2 (February 2005): 46–47. http://dx.doi.org/10.1016/j.jevs.2005.01.004.
Повний текст джерелаDa̧browski, Mariusz P., and H. Gohar. "Abolishing the maximum tension principle." Physics Letters B 748 (September 2015): 428–31. http://dx.doi.org/10.1016/j.physletb.2015.07.047.
Повний текст джерелаMortman, Nadav, Ramalakshmi Ramasamy, and Phillip Smith. "ELDERLY MOUSE DETRUSOR MAINTAINS ITS PEAK FORCE OF CONTRACTION OVER TIME." Innovation in Aging 6, Supplement_1 (November 1, 2022): 665. http://dx.doi.org/10.1093/geroni/igac059.2451.
Повний текст джерелаDeng, Peng, Rong Hua Huang, and Yin Jie Ma. "Improvement and Application of the Maximum Bubble Pressure Tensiometer." Applied Mechanics and Materials 333-335 (July 2013): 113–16. http://dx.doi.org/10.4028/www.scientific.net/amm.333-335.113.
Повний текст джерелаMatsumoto, K. "Surface tension maximum of liquid 3He." Physica B: Condensed Matter 284-288 (July 2000): 198–99. http://dx.doi.org/10.1016/s0921-4526(99)02387-x.
Повний текст джерелаNovriandi, Dicky, Azriyenni Azhari Zakri, and Edy Ervianto. "Sag and Tension of 275 kV Transmission Line using Catenary." International Journal of Electrical, Energy and Power System Engineering 2, no. 3 (October 9, 2019): 15–20. http://dx.doi.org/10.31258/ijeepse.2.3.15-20.
Повний текст джерелаCHEN, Pei Shan, and Mamoru KAWAGUCHI. "SHAPES OF MAXIMUM RIGIDITY FOR TENSION STRUCTURES." Journal of Structural and Construction Engineering (Transactions of AIJ) 60, no. 476 (1995): 113–20. http://dx.doi.org/10.3130/aijs.60.113.
Повний текст джерелаCui, Peng, Yi Zhang, and Yuan Xue. "A novel method of analyzing spinning tensions for yarn breakage detection in ring frame." Journal of Engineered Fibers and Fabrics 15 (January 2020): 155892502090297. http://dx.doi.org/10.1177/1558925020902979.
Повний текст джерелаSchramm, Laurier L., and Loren G. Hepler. "Surface and interfacial tensions of aqueous dispersions of charged colloidal (clay) particles." Canadian Journal of Chemistry 72, no. 9 (September 1, 1994): 1915–20. http://dx.doi.org/10.1139/v94-243.
Повний текст джерелаДисертації з теми "Maximum Tension"
Phung, Kent, and Charles Chu. "Adhesives for Load-Bearing Timber-Glass Elements : Elastic, plastic and time dependent properties." Thesis, Linnéuniversitetet, Institutionen för bygg- och energiteknik (BE), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-27386.
Повний текст джерелаКучірка, Ю. М. "Удосконалені методи підвищення точності результатів дослідження поверхневого натягу рідин та пристрій для їх реалізації". Thesis, Івано-Франківський національний технічний університет нафти і газу, 2013. http://elar.nung.edu.ua/handle/123456789/4629.
Повний текст джерелаДиссертация посвящена разработке усовершенствованных методов и устройства по их реализации для автоматизированного исследования поверхностного натяжения (ПН) жидкостей и растворов ПАВ на границе жидкость - газ с использованием трех зафиксированных между собой капилляров с различными внутренними радиусами и расстоянием между их нижними торцами. В первом разделе осуществлена оценка экспериментальных условий проведения исследования ПН однокомпонентных жидкостей, промышленных растворов ПАВ и биологических жидкостей человека, проанализированы известные методы и приборы для измерения ПН жидкостей и растворов ПАВ за максимальным давлением в пузырьке. Определены их недостатки, сформулированы задачи и направления по их усовершенствованию. Во втором разделе представлены усовершенствованные методы определения равновесного (РПН) и динамического (ДПН) ПН жидкостей и растворов ПАВ, учитывающие отклонения поверхности мениска от полусферической формы в момент максимального давления в пузырьке, которые не требуют предварительного определения плотности жидкости и прецизионной системы погружения капилляров на заданную глубину жидкости, а также методики, которые повышают точность определения РПН и ДПН жидкостей и растворов ПАВ. В третьем разделе описаны требования к устройству с целью реализации им разработанных методов определения ПН жидкостей и растворов ПАВ, а также структурная, функциональная, электрическая, пневматическая схемы, конструкция и программное обеспечение трикапилярного устройства для автоматизированного исследования РПН и ДПН жидкостей и растворов ПАВ. Четвертый раздел посвящен метрологическому анализу погрешностей предложеных методов определения РПН и ДПН жидкостей и растворов ПАВ, а также трикапилярного устройства. Показано, что граничная погрешность определения этим устройством РПН и ДПН жидкостей и растворов ПАВ составит 0,45 ÷ 0,6 мН/м для значений ПН в интервале от 10 до 100 мН/м. В пятом разделе разработана процедура проведения лабораторных испытаний трикапилярного устройства, приведены результаты лабораторных и натурных испытаний, а также выводы, которые были получены при их анализе.
Dissertation is dedicated to research and development of measurement of surface tension at the boundary of contact of fluid and gas and the device, that realizes developed improved methods by using of maximum pressure in the bubble. The known methods of measuring of surface tension of fluids and surfactants solutions by using of maximum pressure in the bubble are analyzed, their merits and demerits are determined. Presented improved methods that take into account deviations from hemispherical surface meniscus forms at the moment of the maximum pressure in the bubble and do not require prior density measurement of liquids and precision system for capillary immersion at a certain depth of fluid and the device with their implementation, allowing automatically investigate surface tension liquids by using of maximum pressure in the bubble.
Ndoye, Mamadou Mustapha. "Contribution à l'étude du transistor bipolaire hyperfréquence sur puce de silicium." Bordeaux 1, 1997. http://www.theses.fr/1997BOR10682.
Повний текст джерелаThis work is a contribution to the study of the high-speed bipolar transistor on silicon chip. First, it presents two original methods allowing to reduce the Base-Collector extrinsic Capacitance, to increase the Base-Collector breakdown voltage, to increase the Voltage Early VA, to increase the maximum power gain Gpmax and to increase the transition frequency FT. Then, it presents a new transistor, hybrid structure between the vertical NPN and the lateral NPN, named bipolar-CLEV (lateral collector-vertical emitter). This study can be generalized to other high speed transistor technologies such as III-V substrate transistors or heterojunction transistors
Ortiz, Thomas. "Two dimensional Maximal Supergravity, Consistent Truncations and Holography." Phd thesis, Ecole normale supérieure de lyon - ENS LYON, 2014. http://tel.archives-ouvertes.fr/tel-01070735.
Повний текст джерелаPereira, Claudia Cristina. "Um estudo do metodo da continuação aplicado a analise do maximo carregamento dos sistemas de potencia." reponame:Repositório Institucional da UFSC, 1998. http://repositorio.ufsc.br/xmlui/handle/123456789/77439.
Повний текст джерелаMade available in DSpace on 2012-10-17T04:13:44Z (GMT). No. of bitstreams: 0Bitstream added on 2016-01-09T00:25:52Z : No. of bitstreams: 1 149019.pdf: 5566618 bytes, checksum: de54225315919a581876f0ca23513303 (MD5)
Este trabalho aborda o problema de determinação do máximo carregamento de um sistema de potência, sob o ponto de vista de análise da estabilidade de tensão. A operação da rede elétrica em condições limite no que diz respeito à capacidade dos equipamentos, tem exigido o desenvolvimento de métodos adequados tanto para a determinação da solução das equações do fluxo de potência no ponto de máxima demanda, como para a detecção da proximidade do ponto crítico sob o aspecto de estabilidade de tensão. Apresenta-se a aplicação do Método da Continuação ao problema de determinação da maxima demanda da rede elétrica. Este método pode ser formulado em coordenadas polares e em coordenadas retangulares. Uma metodologia baseada na modelagem em coordenadas retangulares é mostrada, em duas versões diferentes no que diz respeito ao etapa de correção do Método da Continuação. Os resultados da aplicação da metodologia a sistemas de variados portes ilustram a potencialidade da abordagem baseada no Método da Continuação para a detecção e identificacão de áreas sujeitas ao colapso de tensão, em estudos de planejamento e operação.
Llacua, Zarate Luis Alberto. "Estimação rapida do ponto de maximo carregamento para a analise de estabilidade de tensão de sistemas eletricos de potencia." [s.n.], 2004. http://repositorio.unicamp.br/jspui/handle/REPOSIP/260236.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação
Made available in DSpace on 2018-08-04T00:35:29Z (GMT). No. of bitstreams: 1 LlacuaZarate_LuisAlberto_D.pdf: 4678111 bytes, checksum: ae45f2c83335f23c77b3b0f46577449d (MD5) Previous issue date: 2004
Resumo: o objetivo deste trabalho de pesquisa é propor metodologias para a estimação do ponto de máximo carregamento (PMC) de sistemas elétricos de potência com vistas à análise de estabilidade de tensão. A principal característica dos métodos propostos é a extrema rapidez de cálculo com a manutenção da precisão dos resultados. São utilizadas ferramentas de análise apropriadas que, devidamente combinadas e integralizadas, produzem os resultados esperados. Dentre elas, pode-se citar a análise de sensibilidade, análise de sistemas de equações mal condicionadas e/ou sem solução, e técnicas de otimização. Os métodos essencialmente com enfoque estático, baseiam-se em realizar um certo número de cálculos de fluxo de carga para diferentes níveis de carga no espaço de parâmetros. Assim, o caminho com direção ao PMC é baseado em simples processos de incrementos de carga e cortes de carga, que serão detalhados nos capítulos respectivos. Ressalta-se que dois métodos são presentados, com características bem diferentes em relação ao processo de incrementos de carga com direção ao PMC. A similaridade é apresentada apenas no processo de recuperação da factibilidade. Espera-se que as metodologia que resultem deste trabalho de pesquisa possam ser utilizadas de forma rotineira na análise de estabilidade de tensão de redes elétricas durante o planejamento da operação e, potencialmente, em ambientes cujas restrições de esforço computacional sejam ainda mais severas, como em ambientes de operação e análise em tempo real
Abstract: The goal of this research work is to propose methodologies for estimating the maximum loading point (MLP) of power systems for voltage stability analysis. The main feature of the proposed methods is the fast computation of MLP, while maintaining the precision of the results. Appropriate analysis tools are integrated to provide the expected results. Among them, are can mention sensitivity analysis, ill-conditioned and/or infeasible system analysis and optimization techniques. The proposed methods, with a static approach, is based on solving a certain number of load flow calculations for different load levels. Therefore, the path toward MLP is based on simple load increments or curtailments. It must be emphasized that two methods will be presented, with different characteristics with respect to the load increment processo Moreover, they are similar with respect to the feasibility restoration processo It is expected that the proposed methods can be routinely used in power systems voltage stability analysis in operation planning and potentially in enviroments with severe computational effort constraints, such as in real time operation
Doutorado
Energia Eletrica
Doutor em Engenharia Elétrica
Souza, Tiago de Jesus. "Previsão da curva tensão-recalque em solos tropicais arenosos a partir de ensaios de cone sísmico." Universidade de São Paulo, 2011. http://www.teses.usp.br/teses/disponiveis/18/18132/tde-25042012-163755/.
Повний текст джерелаIt is presented in this dissertation the use of a method for predicting the stress-settlement curve of shallow foundations on tropical sandy soils based on seismic cone (SCPT) test results. The studied sites were the experimental research sites from USP - São Carlos, and UNESP - Bauru, Brazil, where there are results from plate load tests conducted at various depths, as well as SCPT test results. The stress-settlement curve predictions show good results, after adjusting the parameters f and g, because the estimated curves were close to those obtained from plate load tests, to depths greater than 1.5 meters. The applicability of the method, after its adjustment, to reproduce the stress-settlement curve for this type of soil, was verified employing a more rational approach with less reliance on empirical correlations. It is highlighted in this research that there is variability on SCPT and plate load test results, which is related to the change in soil suction. It was also possible to access the variability on the prediction for the USP São Carlos site, since there is a greater number of in situ and plate load tests in this site.
Romanello, Michael T. "Load Response Analysis of the WAY-30 Test Pavements: US Route 30, Wayne County, Ohio." Ohio : Ohio University, 2007. http://www.ohiolink.edu/etd/view.cgi?ohiou1196092689.
Повний текст джерелаZeferino, Cristiane Lionço. "Estudo do máximo carregamento em sistemas de energia elétrica via método da barreira modificada." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/18/18133/tde-08032007-113530/.
Повний текст джерелаIn this work the modified barrier Lagrangian function (MBLF) method, a variant of the interior point method. The formulation of the problem will have as constraints of equality the power system swinging equations, in a parametrized form, and as inequality constraints the voltage limits in the buses and the reactive generation limits in the buses with reactive control. The results found with the static optimization technique used in this study are confronted with the results obtained with the primal-dual barrier logarithmic method. The performance of the method is illustrated using as pattern the systems IEEE 14, 57 and 118 bars. The tests demonstrated the robustness and the efficiency of the proposed algorithm.
Attia, Sid Ahmed. "Sur la commande des systèmes non linéaires à dynamique hybride." Phd thesis, Grenoble INPG, 2005. http://tel.archives-ouvertes.fr/tel-00082495.
Повний текст джерелаhybrid switched systems. A diverse number of applications from automotive industry, fluid dyna-
mics and power systems are treated. Some general open loop optimal and predictive control schemes
are proposed. The main motivation behind each method is the reduction of the combinatorics. In
this thesis, two main contributions can be distinguished. The first one concerns the optimal control
of switched nonlinear systems where an algorithm based on strong variations is proposed and some
convergence results proven. The complexity of the scheme is linear in the number of locations, this
in conjunction with its simplicity makes it attractive for large scale systems. An example from
the automotive industry is treated to further illustrate the tractability of the scheme. The second
contribution concerns the development of a hierarchical approach for switched nonlinear systems.
At the lower level, feedback controllers are associated to each location and at the higher level a
predictive approach with a reduced order parametrization is in force. Based on this methodology,
two schemes are developed and successfully tested in respectively fluid stabilisation by actuator
switching and voltage stabilization in power systems.
Книги з теми "Maximum Tension"
Greenblatt, Seth A. Tensor methods for full-information maximum likelihood estimation: Unconstrained estimation. Reading: University of Reading. Department of Economics, 1992.
Знайти повний текст джерелаGreenblatt, Seth A. Tensor methods for full-information maximum likelihood estimation: Estimation with parameter constraints. Reading: University of Reading. Department of Economics, 1992.
Знайти повний текст джерелаNachtomy, Ohad. Living Mirrors. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780190907327.001.0001.
Повний текст джерелаPatton, Raymond A. Thatcher, Reagan, Jaruzelski. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780190872359.003.0006.
Повний текст джерелаWoloch, Nancy. A Class by Herself. Princeton University Press, 2017. http://dx.doi.org/10.23943/princeton/9780691002590.001.0001.
Повний текст джерелаCooper, Stephen, and Clorinda Donato, eds. John Fante's Ask the Dust. Fordham University Press, 2020. http://dx.doi.org/10.5422/fordham/9780823287864.001.0001.
Повний текст джерелаZydroń, Tymoteusz. Wpływ systemów korzeniowych wybranych gatunków drzew na przyrost wytrzymałości gruntu na ścinanie. Publishing House of the University of Agriculture in Krakow, 2019. http://dx.doi.org/10.15576/978-83-66602-46-5.
Повний текст джерелаЧастини книг з теми "Maximum Tension"
Sakata, Toshio, Toshio Sumi, and Mitsuhiro Miyazaki. "Maximal Ranks." In Algebraic and Computational Aspects of Real Tensor Ranks, 39–59. Tokyo: Springer Japan, 2016. http://dx.doi.org/10.1007/978-4-431-55459-2_5.
Повний текст джерелаZhang, Yue, Yu-Jong Tzeng, and Eugene Zhang. "Maximum Number of Degenerate Curves in 3D Linear Tensor Fields." In Mathematics and Visualization, 221–34. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-44684-4_13.
Повний текст джерелаZhang, Yue, Lawrence Roy, Ritesh Sharma, and Eugene Zhang. "Maximum Number of Transition Points in 3D Linear Symmetric Tensor Fields." In Mathematics and Visualization, 237–50. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43036-8_15.
Повний текст джерелаOu, Yeong-Jeong, and Lung-Wen Tsai. "Design of a Three-dof Tendon-driven Manipulator with the Characteristics of Equal Maximum Tensions." In Advances in Robot Kinematics and Computational Geometry, 369–78. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-015-8348-0_37.
Повний текст джерелаHagberg, S., A. Rubenson, U. Sillén, and K. Werkmäster. "Management of Long-gap Esophagus: Experience with End-to-End Anastomosis Under Maximal Tension." In Long-gap Esophageal Atresia, 88–92. Berlin, Heidelberg: Springer Berlin Heidelberg, 1986. http://dx.doi.org/10.1007/978-3-642-70777-3_8.
Повний текст джерелаDaniyan, Ilesanmi, Khumbulani Mpofu, Bankole Oladapo, and Rufus Ajetomobi. "Modelling and Simulation of Automated Hydraulic Press Brake." In Lecture Notes in Mechanical Engineering, 64–78. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_7.
Повний текст джерелаMerlet, Jean-Pierre. "Maximal Cable Tensions of a N-1 Cable-Driven Parallel Robot with Elastic or Ideal Cables." In Mechanisms and Machine Science, 79–89. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-75789-2_7.
Повний текст джерелаSingh, Manohar, and Pushpendra S. Bharti. "Identification of Process Parameter Combination for Maximum Tensile Strength in 3D Printed Polylactic Acid Specimens Using Regression and ANOVA." In Lecture Notes in Mechanical Engineering, 217–25. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1618-2_21.
Повний текст джерелаThomsen, A. R., M. R. Saalmann, N. H. Nicolay, A. L. Grosu, and Peter Vaupel. "Temperature Profiles and Oxygenation Status in Human Skin and Subcutis Upon Thermography-Controlled wIRA-Hyperthermia." In Water-filtered Infrared A (wIRA) Irradiation, 69–80. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-92880-3_5.
Повний текст джерелаZakariyah, Luqman. "Islamic Legal Maxims for Attainment of Maqasid-al-Shari‘ah in Criminal Law: Reflections on the Implications for Muslim Women in the Tension Between Shari‘ah and Western Law." In Women in Islam, 117–34. Dordrecht: Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-4219-2_9.
Повний текст джерелаТези доповідей конференцій з теми "Maximum Tension"
von Toussaint, U., S. Gori, Ali Mohammad-Djafari, Jean-François Bercher, and Pierre Bessiére. "DIGITAL PARTICLE IMAGE VELOCIMETRY USING SPLINES IN TENSION." In BAYESIAN INFERENCE AND MAXIMUM ENTROPY METHODS IN SCIENCE AND ENGINEERING: Proceedings of the 30th International Workshop on Bayesian Inference and Maximum Entropy Methods in Science and Engineering. AIP, 2011. http://dx.doi.org/10.1063/1.3573635.
Повний текст джерелаSun, L., R. Wada, and K. Takagi. "Maximum Mooring Tension Estimation of External Turret Moored FLNG." In 2018 OCEANS - MTS/IEEE Kobe Techno-Ocean (OTO). IEEE, 2018. http://dx.doi.org/10.1109/oceanskobe.2018.8559058.
Повний текст джерелаLee, Ki Bang, Firas Sammoura, and Liwei Lin. "Surface Tension Propelled Microboats." In ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-60680.
Повний текст джерелаHermawan, A. Rudi, Eka Sasmita Mulya, and Sarito. "Analysis of Precast Hybrid Concrete Beam with Lightweight Concrete at Tension Maximum." In Annual Southeast Asian International Seminar. SCITEPRESS - Science and Technology Publications, 2020. http://dx.doi.org/10.5220/0010507500050008.
Повний текст джерелаRoosen, Marco A., Max A. N. Hendriks, Yuguang Yang, Cor van der Veen, and Dick Schaafsma. "Resistance of prestressed bridge girders to diagonal tension cracking." In IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/ghent.2021.0819.
Повний текст джерелаRoosen, Marco A., Max A. N. Hendriks, Yuguang Yang, Cor van der Veen, and Dick Schaafsma. "Resistance of prestressed bridge girders to diagonal tension cracking." In IABSE Congress, Ghent 2021: Structural Engineering for Future Societal Needs. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE), 2021. http://dx.doi.org/10.2749/ghent.2021.0819.
Повний текст джерелаMetwalli, Sayed M., M. Alaa Radwan, and Abdel Aziz M. Elmeligy. "Optimization of Helical Compression and Tension Springs." In ASME 1993 Design Technical Conferences. American Society of Mechanical Engineers, 1993. http://dx.doi.org/10.1115/detc1993-0423.
Повний текст джерелаTsuji, Hirokazu, and Kazuo Maruyama. "Estimation of Yield Clamping Force Based on Rigid-Plastic Model." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-1195.
Повний текст джерелаXu, Sheng, C. Guedes Soares, and Ângelo P. Teixeira. "Reliability Analysis of Short Term Mooring Tension of a Semi-Submersible System." In ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/omae2018-78751.
Повний текст джерелаZhang, Su-xia, You-gang Tang, and Hai-xiao Liu. "Study on Snap Tension in Mooring Lines of Deepwater Platform." In ASME 2009 28th International Conference on Ocean, Offshore and Arctic Engineering. ASMEDC, 2009. http://dx.doi.org/10.1115/omae2009-79881.
Повний текст джерелаЗвіти організацій з теми "Maximum Tension"
Gerth, Wayne A., and David J. Doolette. VVal-79 Maximum Permissible Tissue Tension Table for Thalmann Algorithm Support of Air Diving. Fort Belvoir, VA: Defense Technical Information Center, March 2012. http://dx.doi.org/10.21236/ada561928.
Повний текст джерелаEXPERIMENTAL STUDY ON WELDING RESIDUAL STRESS OF TWO-WAY STIFFENED STEEL PLATES. The Hong Kong Institute of Steel Construction, August 2022. http://dx.doi.org/10.18057/icass2020.p.531.
Повний текст джерелаSTUDY ON MECHANICAL PROPERTIES OF STAINLESS STEEL PLATE SHEAR WALL STRENGTHENED BY CORRUGATED FRP. The Hong Kong Institute of Steel Construction, August 2022. http://dx.doi.org/10.18057/icass2020.p.305.
Повний текст джерелаLOW-CYCLE FATIGUE PROPERTIES OF AUSTENITIC STAINLESS STEEL S30408 UNDER LARGE PLASTIC STRAIN AMPLITUDE. The Hong Kong Institute of Steel Construction, March 2022. http://dx.doi.org/10.18057/ijasc.2022.18.1.10.
Повний текст джерела