Книги з теми "Material Flow Analysi"

National Research Council (U.S.). Committee on Material Flows Accounting of Natural Resources, Products, and Residuals. and National Academy of Sciences (U.S.), eds. Materials count: The case for material flows analysis. Washington, D.C: National Academies Press, 2004.

Brunner, Paul H., and Helmut Rechberger. Handbook of Material Flow Analysis. Boca Raton : Taylor & Francis, CRC Press, 2017. | Revised: CRC Press, 2016. http://dx.doi.org/10.1201/9781315313450.

Helmut, Rechberger, ed. Practical handbook of material flow analysis. Boca Raton, Fla: Lewis, 2004.

Helber, Stefan. Performance Analysis of Flow Lines with Non-Linear Flow of Material. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-95863-2.

Bordbar, Mohammad Hadi. Theoretical analysis and simulations of vertically vibrated granular materials. Lappeenranta: Lappeenranta University of Technology, 2005.

Environmental Systems Analysis and Management: Material Flow Analysis and Integration of Watersheds and Drainage Systems. Saarbrücken: VDM Verlag Dr. Müller, 2010.

Jasch, Christine. Environmental and material flow cost accounting: Principles and procedures / Christine Jasch. [New York]: Springer, 2009.

Thiros, Susan A. Chemical composition of ground water, hydrologic properties of basin-fill material, and ground-water movement in Salt Lake Valley, Utah. Salt Lake City, Utah: Utah, Dept. of Natural Resources, Division of Water Rights, 1995.

Ramirez, Sotero Manuel. Flow cytometric analysis of material induced platelet derived microparticles, activated platelets, and platelet leukocyte associations. Ottawa: National Library of Canada, 1993.

Rapera, Corazon Lira. Economic and sustainability indications from trends in material flows in the Philippines, 1981-2002. Chiba-shi, Chiba, Japan]: Institute of Developing Economies, Japan External Trade Organization, 2006.

Hageman, Philip L. Determination of mercury in aqueous and geologic materials by continuous flow-Cold Vapor-Atomic Fluorescence Spectrometry (CVAFS). Reston, Va: U.S. Geological Survey, 2007.

Panfilov, Mikhail. Macroscale models of flow through highly heterogeneous porous media. Dordrecht: Kluwer Academic Publishers, 2000.

1960-, Salem J. A., and United States. National Aeronautics and Space Administration., eds. Cyclic fatigue of brittle materials with an indentation-induced flaw system. [Washington, DC: National Aeronautics and Space Administration, 1996.

Pippin, H. Gary. Analysis of silverized teflon thermal control material flown on the Long Duration Exposure Facility. Hampton, Va: Langley Research Center, 1995.

A, Smith H., and Langley Research Center, eds. Analysis of selected materials flown on interior locations of the long duration exposure facility. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1994.

Pippin, H. Gary. Analysis of materials flown on the Long Duration Exposure Facility: summary of results of the Materials Special Investigation Group. Hampton, Va: Langley Research Center, 1995.

Parsons, Ewing Robert, and SpringerLink (Online service), eds. Percolation theory for flow in porous media. 2nd ed. Berlin: Springer, 2009.

H, Starnes James, United States. National Aeronautics and Space Administration., and AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference (1998 Long Beach, Calif.), eds. Effect of curvature on the impact damage characteritiscs and residual strength of composite plates: Presented at 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference : Long Beach, California, April 20-23, 1998. [Washington, DC: National Aeronautics and Space Administration, 1998.

American Society of Mechanical Engineers. Pressure Vessels and Piping Division. and International Mechanical Engineering Congress and Exposition (2004 : Anaheim, Calif.), eds. Proceedings of the ASME Pressure Vessels and Piping Division-- 2004: 2004 forum on fluid transients, recent advances in solids and structures : presented at 2004 ASME International Mechanical Engineering Congress and Exposition : November 13-19, 2004, Anaheim, California, USA. New York, N.Y: ASME, 2004.

M, O'Farrell J., and United States. National Aeronautics and Space Administration., eds. High frequency flow/structural interaction in dense subsonic fluids. [Huntsville, Ala.]: Rockwell Aerospace, Space Systems Division, Huntsville Operations, 1994.

M, O'Farrell J., and George C. Marshall Space Flight Center., eds. High frequency flow/structural interaction in dense subsonic fluids. Marshall Space Flight Center, Ala: National Aeronautics and Space Administration, Marshall Space Flight Center, 1995.

Ji yu wu zhi liu fen xi de Zhongguo zi yuan sheng chan lü yan jiu: The resource productivity of China : a study on the basis of material flow analysis. Beijing Shi: Zhongguo jing ji chu ban she, 2009.

Shilyaev, Mihail, Elena Hromova, Aleksandr Bogomolov, A. Pavlenko, and V. Butov. Modeling of hydrodynamics and heat and mass transfer in dispersed media. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1865376.

Adamchuk, Natal'ya, Rustam Azimov, Tamara Belousova, Denis Bryzgalov, Ekaterina Bryzgalova, Tat'yana Verezubova, Zeynegul' Esymhanova, et al. Insurance in the digital economy: science, practice, education. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1816154.

Pressure Vessels and Piping Conference (2006 Vancouver, B.C.). Proceedings of the ASME Pressure Vessels and Piping Conference--2006: Presented at 2006 ASME Pressure Vessels and Piping Conference : July 23-27, 2006, Vancouver, BC, Canada. New York, N.Y: ASME, 2007.

Pressure Vessels and Piping Conference (2006 Vancouver, B.C.). Proceedings of the ASME Pressure Vessels and Piping Conference--2006: Presented at 2006 ASME Pressure Vessels and Piping Conference, July 23-27, 2006, Vancouver, BC, Canada. New York: American Society of Mechanical Engineers, 2007.

Pressure Vessels and Piping Conference (2005 Denver, Colo.). Proceedings of the ASME Pressure Vessels and Piping Conference--2005: Presented at 2005 ASME Pressure Vessels and Piping Conference : July 17-21, 2005, Denver, Colorado, USA. New York, N.Y: ASME, 2005.

Pressure, Vessels and Piping Conference (2008 Chicago Ill ). Proceedings of the ASME Pressure Vessels and Piping Conference--2008: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 2009.

American Society of Mechanical Engineers. Pressure Vessels and Piping Division., ed. Proceedings of the ASME Pressure Vessels and Piping Conference--2008: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 2009.

Pressure Vessels and Piping Conference (2008 Chicago, Ill.). Proceedings of the ASME Pressure Vessels and Piping Conference--2008: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 2009.

Pressure Vessels and Piping Conference (2007 San Antonio, Tex.). Proceedings of the ASME Pressure Vessels and Piping Conference--2007: Presented at 2007 ASME Pressure Vessels and Piping Conference, July 22-26, 2007, San Antonio, Texas, USA. Edited by Hasegawa K, Scarth Douglas A, American Society of Mechanical Engineers. Pressure Vessels and Piping Division., and International Conference on Creep and Fatigue at Elevated Temperatures (8th : 2007 : San Antonio, Tex.). New York, N.Y: American Society of Mechanical Engineers, 2008.

Pressure Vessels and Piping Conference (2008 Chicago, Ill.). Proceedings of the ASME Pressure Vessels and Piping Conference--2008: Presented at 2008 ASME Pressure Vessels and Piping Conference, July 27-31, 2008, Chicago, Illinois ; sponsored by Pressure Vessels and Piping Division, ASME. New York: American Society of Mechanical Engineers, 2009.

International Conference "Modern Mathematical Methods of Investigating the Telecommunicational Networks" (17th 2003 Gomelʹ, Belarus). Massovoe obsluzhivanie: Potoki, sistemy, seti : materialy mezhdunarodnoĭ konferent︠s︡ii "Sovremennye matematicheskie metody analiza i optimizat︠s︡ii telekommunikat︠s︡ionnykh seteĭ", 23-25, senti︠a︡bri︠a︡ 2003 g., Gomel = Queues--flows, systems, networks : proceedings of the International Conference "Modern Mathematical Methods of Analysis and Optimization of Telecommunicational Networks", 23-25, September, 2003, Gomel. Minsk: Belorusskiĭ gos. universitet, 2003.

International Conference "Modern Mathematical Methods of Investigating the Telecommunicational Networks" (17th 2003 Gomelʹ, Belarus). Massovoe obsluzhivanie: Potoki, sistemy, seti : materialy mezhdunarodnoĭ konferent︠s︡ii "Sovremennye matematicheskie metody analiza i optimizat︠s︡ii telekommunikat︠s︡ionnykh seteĭ", 23-25, senti︠a︡bri︠a︡ 2003 g., Gomel = Queues--flows, systems, networks : proceedings of the International Conference "Modern Mathematical Methods of Analysis and Optimization of Telecommunicational Networks", 23-25, September, 2003, Gomel. Minsk: Belorusskiĭ gos. universitet, 2003.

Kumar, Sanjeev. Material Flow Analysis. IntechOpen, 2021.

Committee on Material Flows Accounting of Natural Resources, Products, and Residuals, Board on Earth Sciences and Resources, Committee on Earth Resources, Division on Earth and Life Studies, and National Research Council. Materials Count: The Case for Material Flows Analysis. National Academies Press, 2004.

(US), National Research Council. Materials Count: The Case For Material Flows Analysis. National Academies Press, 2004.

National Academy of Sciences U.S. Materials Count: The Case for Material Flows Analysis. National Academy Press, 2004.

Committee on Material Flows Accounting of Natural Resources, Products, and Residuals, Board on Earth Sciences and Resources, Committee on Earth Resources, Division on Earth and Life Studies, and National Research Council. Materials Count: The Case for Material Flows Analysis. National Academies Press, 2004.

Brunner, Paul H., and Helmut Rechberger. Handbook of Material Flow Analysis. Taylor & Francis Group, 2020.

Brunner, Paul H., and Helmut Rechberger. Practical Handbook of Material Flow Analysis. CRC Press, 2003. http://dx.doi.org/10.1201/9780203507209.

Brunner, Paul H., and Helmut Rechberger. Practical Handbook of Material Flow Analysis. Taylor & Francis Group, 2016.

Brunner, Paul H. Practical Handbook of Material Flow Analysis. Taylor & Francis Group, 2003.

Brunner, Paul H., and Helmut Rechberger. Practical Handbook of Material Flow Analysis. Taylor & Francis Group, 2003.

Helber, Stefan. Performance Analysis of Flow Lines With Non-Linear Flow of Material. Springer-Verlag Telos, 1999.

Helber, Stefan. Performance Analysis of Flow Lines with Non-Linear Flow of Material. Springer London, Limited, 2012.

Elshkaki, Ayman. Handbook of Dynamic Material Flow Analysis Modeling and Applications. Taylor & Francis Group, 2019.

Elshkaki, Ayman. Handbook of Dynamic Material Flow Analysis Modeling and Applications. Taylor & Francis Group, 2019.

Handbook of Material Flow Analysis: A Practitioner's Guide, Second Edition. Taylor & Francis Group, 2016.

Jasch, Christine M. Environmental and Material Flow Cost Accounting: Principles and Procedures. Springer, 2010.