Добірка наукової літератури з теми "Material extrusion (ME)"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Material extrusion (ME)".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Material extrusion (ME)"
Hsiang Loh, Giselle, Eujin Pei, Joamin Gonzalez-Gutierrez, and Mario Monzón. "An Overview of Material Extrusion Troubleshooting." Applied Sciences 10, no. 14 (July 11, 2020): 4776. http://dx.doi.org/10.3390/app10144776.
Повний текст джерелаJiang, Shijie, Ke Hu, Yang Zhan, Chunyu Zhao, and Xiaopeng Li. "Theoretical and Experimental Investigation on the 3D Surface Roughness of Material Extrusion Additive Manufacturing Products." Polymers 14, no. 2 (January 11, 2022): 293. http://dx.doi.org/10.3390/polym14020293.
Повний текст джерелаChua, Bih-Lii, Sun-Ho Baek, Keun Park, and Dong-Gyu Ahn. "Numerical Investigation of Deposition Characteristics of PLA on an ABS Plate Using a Material Extrusion Process." Materials 14, no. 12 (June 19, 2021): 3404. http://dx.doi.org/10.3390/ma14123404.
Повний текст джерелаCarminati, Mattia, Mariangela Quarto, Gianluca D’Urso, Claudio Giardini, and Giancarlo Maccarini. "Mechanical Characterization of AISI 316L Samples Printed Using Material Extrusion." Applied Sciences 12, no. 3 (January 28, 2022): 1433. http://dx.doi.org/10.3390/app12031433.
Повний текст джерелаJiang, Shijie, Yinfang Shi, Yannick Siyajeu, Ming Zhan, Chunyu Zhao, and Changyou Li. "Effect of Processing Parameters on the Dynamic Characteristic of Material Extrusion Additive Manufacturing Plates." Applied Sciences 9, no. 24 (December 6, 2019): 5345. http://dx.doi.org/10.3390/app9245345.
Повний текст джерелаRevilla-Leon, Marta, Marina Olea-Vielba, Ana Esteso-Díaz, Iñaki Martinez-Klemm, Jose Manuel Reuss Rodriguez-Vilaboa, and Mutlu Özcan. "New fabrication method using additive manufacturing technologies for the pattern of pressed lithium disilicate onlay restorations." Brazilian Dental Science 20, no. 4 (December 20, 2017): 149. http://dx.doi.org/10.14295/bds.2017.v20i4.1364.
Повний текст джерелаKim, Hyungjung, Hyunsu Lee, Ji-Soo Kim, and Sung-Hoon Ahn. "Image-based failure detection for material extrusion process using a convolutional neural network." International Journal of Advanced Manufacturing Technology 111, no. 5-6 (October 9, 2020): 1291–302. http://dx.doi.org/10.1007/s00170-020-06201-0.
Повний текст джерелаWatschke, Hagen, Lennart Waalkes, Christian Schumacher, and Thomas Vietor. "Development of Novel Test Specimens for Characterization of Multi-Material Parts Manufactured by Material Extrusion." Applied Sciences 8, no. 8 (July 25, 2018): 1220. http://dx.doi.org/10.3390/app8081220.
Повний текст джерелаGalantucci, Luigi Maria, Alessandro Pellegrini, Maria Grazia Guerra, and Fulvio Lavecchia. "3D Printing of parts using metal extrusion: an overview of shaping debinding and sintering technology." Advanced Technologies & Materials 47, no. 1 (June 15, 2022): 25–32. http://dx.doi.org/10.24867/atm-2022-1-005.
Повний текст джерелаTateno, Toshitake, Akira Kakuta, Hayate Ogo, and Takaya Kimoto. "Ultrasonic Vibration-Assisted Extrusion of Metal Powder Suspension for Additive Manufacturing." International Journal of Automation Technology 12, no. 5 (September 5, 2018): 775–83. http://dx.doi.org/10.20965/ijat.2018.p0775.
Повний текст джерелаДисертації з теми "Material extrusion (ME)"
Huang, Yi-Ting, and 黃怡婷. "Analysis of Material Properties of Copper-Based Alloy by 3D Printing and Modelling of Melt-Extrusion (ME)." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/mz9xja.
Повний текст джерела國立臺灣大學
材料科學與工程學研究所
106
This study adapts a melt extrusion module [1, 2], which was designed and developed by our group, selects Cu-base alloys capable of melting at <1300 oC, and has conducted 3D printing to make smart mold in previous study. Therefore, this research objectives are to investigate the hardness, wear resistance and compositional uniformity of Cu-based alloys, and the forces required for the melt extrusion. The results show that the hardness (269 HV) of annealed Cu-9Ni-6Sn is obviously superior to Cu-6Ni-2Al (237 HV) and the surface hardness (207 HV) of Ni-coated key. In contact wear, the higher the hardness of the alloys, the lower the wear rate. The relationship between hardness and wear rate is inversely linear behavior. A quantification analysis of the chemical composition of the wires used for 3D printing used Energy-dispersive X-ray spectroscopy (EDS) for the analysis. The standard deviation for the Ni in Cu-11Ni test is less than 0.2 %. Finally, the melting extrusion simulation of high temperature melt Cu alloy is conducted with 0.4 ~ 0.2 mm nozzle size. The required 4 forces against the frictions coming from the tube wall and the nozzle were considered. The simulation results resolve the flowing behavior of high viscous glass and melt Cu-alloy in Al2O3 nozzle through smaller nozzles.
Chou, Chih-Shiun, and 周志勳. "Application of Cu-Based Material on Solid Oxide Fuel Cell (SOFC) and Development of Melt-Extrusion (ME) Module." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/26619039355834384597.
Повний текст джерела國立臺灣大學
材料科學與工程學研究所
103
This study used Cu-based materials as an anode of solid oxide fuel cells (SOFCs) and conducted the following R&D works. Properties of Cu and Cu-Zn alloy were investigated, including electrical conductivity, coefficient of thermal expansion (CTE), hardness and oxidation behavior. The oxidation-resistance of Cu, Ni and Ti-6Al-4V was investigated and compared. Moreover, the microstructure of the oxide layers was observed to verify the results of TGA test. This study also developed cobalt-doped SDC cermet as an electrolyte for intermediate temperature (IT)-SOFC. The Cu-based electrode provided good electronic conductivity and prevented carbon deposition. The SDC was used as catalyst and ionic conductor. The methods to synthesize SDC and sinter a dense SDC electrolyte were also provided in this study. Maximum power density of the Cu-based SOFC was 112 mW cm-2 at 750 oC. On the other hand, due to a low melting point and good formability of Cu-Zn alloy, it was suitably applied on 3D printing (3DP) technique. As a result, a melt-extrusion (ME) module was designed to print Cu-Zn alloy. The ME module could reach 1100 oC to extrude Cu-Zn alloy. Besides, the heat insulation of the module was excellent, which was 51 oC outside the module while the temperature in the nozzle was 1000 oC.
Тези доповідей конференцій з теми "Material extrusion (ME)"
Mallian, Schuravi, and Boppana Chowdary. "MULTI-OPTIMIZATION OF EMPIRICAL MODELS FOR THE MATERIAL EXTRUSION PROCESS." In International Conference on Emerging Trends in Engineering & Technology (IConETech-2020). Faculty of Engineering, The University of the West Indies, St. Augustine, 2020. http://dx.doi.org/10.47412/wizl8999.
Повний текст джерелаEiliat, Hasti, and Jill Urbanic. "Minimizing Voids With Using an Optimal Raster Orientation and Bead Width for a Material Extrusion Based Process." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-67708.
Повний текст джерела