Статті в журналах з теми "Material characterisation: SEM/EDS/EBSD"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-44 статей у журналах для дослідження на тему "Material characterisation: SEM/EDS/EBSD".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Stephenson, Oscar, Rebecca L. Higginson, Simon Hogg, Jacob Knight, and Sarah Spindler. "Characterisation of Long Term Aging in Esshete 1250 Welds." Materials Science Forum 941 (December 2018): 589–94. http://dx.doi.org/10.4028/www.scientific.net/msf.941.589.
Повний текст джерелаRößler, Christiane, Dominik Zimmer, Patrick Trimby, and Horst-Michael Ludwig. "Chemical – crystallographic characterisation of cement clinkers by EBSD-EDS analysis in the SEM." Cement and Concrete Research 154 (April 2022): 106721. http://dx.doi.org/10.1016/j.cemconres.2022.106721.
Повний текст джерелаParish, Chad M. "Cluster Analysis of Combined EDS and EBSD Data to Solve Ambiguous Phase Identifications." Microscopy and Microanalysis 28, no. 2 (March 3, 2022): 371–82. http://dx.doi.org/10.1017/s1431927622000010.
Повний текст джерелаSchulz, Bernhard, Dirk Sandmann, and Sabine Gilbricht. "SEM-Based Automated Mineralogy and Its Application in Geo- and Material Sciences." Minerals 10, no. 11 (November 11, 2020): 1004. http://dx.doi.org/10.3390/min10111004.
Повний текст джерелаZasada, Dariusz, Wojciech Polkowski, and Robert Jasionowski. "Analysis of the Effect of the Wearing Type on Surface Structural Changes of Ni3Al-Based Intermetallic Alloy." Solid State Phenomena 225 (December 2014): 25–32. http://dx.doi.org/10.4028/www.scientific.net/ssp.225.25.
Повний текст джерелаKejzlar, Pavel, Tomáš Pilvousek, and Michal Tregler. "Determination of DC06+ZE Sheet Crack Cause." Defect and Diffusion Forum 368 (July 2016): 121–25. http://dx.doi.org/10.4028/www.scientific.net/ddf.368.121.
Повний текст джерелаDrawin, Stefan, Virgil Malard, Anne Denquin, Jean Philippe Monchoux, and Alain Couret. "From Pre-Alloyed Rod to Gas-Atomized Powder and SPS Sintered Samples: How the Microstructure of an Nb Silicide Based Alloy Evolves." Materials Science Forum 941 (December 2018): 1264–69. http://dx.doi.org/10.4028/www.scientific.net/msf.941.1264.
Повний текст джерелаHigginson, R. L., G. D. West, and M. A. E. Jepson. "The Characterisation of Oxide Scales Grown on Nickel Containing Steel Substrates Using Electron Backscatter Diffraction." Materials Science Forum 539-543 (March 2007): 4482–87. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.4482.
Повний текст джерелаWendler, Bogdan, Łukasz Kaczmarek, M. Jachowicz та A. Rylski. "Oxidation Resistance of Nanocrystalline Microalloyed γ–TiAl Coatings under Isothermal Conditions and Thermal Fatigue". Materials Science Forum 513 (травень 2006): 135–48. http://dx.doi.org/10.4028/www.scientific.net/msf.513.135.
Повний текст джерелаReshma, C., and J. Mary Gladis. "Synthesis and Characterisation of Ternary Nanocomposites as Cathode Material for Lithium-Sulphur Batteries." Materials Science Forum 830-831 (September 2015): 604–7. http://dx.doi.org/10.4028/www.scientific.net/msf.830-831.604.
Повний текст джерелаGuan, Jing, Qing Xiang, Xiuhua Zhang, Jing Liu, and Feng Yang. "Analysis of the mechanical properties and microstructure of titanium surfaces designed by electromagnetic induction nitriding." Materials Research Express 9, no. 2 (February 1, 2022): 020010. http://dx.doi.org/10.1088/2053-1591/ac52c5.
Повний текст джерелаKovács, Dorina, Annamária Szabó, and Alexandra Kemény. "The Role of the Material of Active Screen During the Plasma Nitriding Process." Acta Materialia Transylvanica 3, no. 1 (April 1, 2020): 20–25. http://dx.doi.org/10.33924/amt-2020-01-04.
Повний текст джерелаVarughese, G., V. Rini, S. P. Suraj, and K. T. Usha. "Characterisation and Optical Studies of Copper Oxide Nanostructures Doped with Lanthanum Ions." Advances in Materials Science 14, no. 4 (December 1, 2014): 49–60. http://dx.doi.org/10.2478/adms-2014-0021.
Повний текст джерелаCui, Di, Antaryami Mohanta, and Marc Leparoux. "Interface Control in Additive Manufacturing of Dissimilar Metals Forming Intermetallic Compounds—Fe-Ti as a Model System." Materials 13, no. 21 (October 23, 2020): 4747. http://dx.doi.org/10.3390/ma13214747.
Повний текст джерелаPorta-Velilla, Luis, Neslihan Turan, Álvaro Cubero, Wei Shao, Hongtao Li, Germán F. de la Fuente, Elena Martínez, et al. "Highly Regular Hexagonally-Arranged Nanostructures on Ni-W Alloy Tapes upon Irradiation with Ultrashort UV Laser Pulses." Nanomaterials 12, no. 14 (July 12, 2022): 2380. http://dx.doi.org/10.3390/nano12142380.
Повний текст джерелаPanagiotopoulou, C., Glykeria Kakali, Sotiris Tsivilis, T. Perraki, and Maria Perraki. "Synthesis and Characterisation of Slag Based Geopolymers." Materials Science Forum 636-637 (January 2010): 155–60. http://dx.doi.org/10.4028/www.scientific.net/msf.636-637.155.
Повний текст джерелаDyer, Ashley, Jonathan Jones, Richard Cutts, and Mark Whittaker. "The Effect of Phase Angle on the Thermo-Mechanical Fatigue Life of a Titanium Metal Matrix Composite." Materials 12, no. 6 (March 22, 2019): 953. http://dx.doi.org/10.3390/ma12060953.
Повний текст джерелаSequeiros, Elsa W., Anibal Guedes, Ana Maria Pires Pinto, Manuel F. Vieira та Filomena Viana. "Microstructure and Strength of γ-TiAl Alloy/Inconel 718 Brazed Joints". Materials Science Forum 730-732 (листопад 2012): 835–40. http://dx.doi.org/10.4028/www.scientific.net/msf.730-732.835.
Повний текст джерелаMalczyk, Piotr, Tilo Zienert, Florian Kerber, Christian Weigelt, Sven-Olaf Sauke, Hubertus Semrau, and Christos G. Aneziris. "Corrosion-Resistant Steel–MgO Composites as Refractory Materials for Molten Aluminum Alloys." Materials 13, no. 21 (October 23, 2020): 4737. http://dx.doi.org/10.3390/ma13214737.
Повний текст джерелаCharlton, T. S., M. Rouainia, A. C. Aplin, Q. J. Fisher, and L. Bowen. "Micromechanical characterisation of overburden shales in the Horn River Basin through nanoindentation." IOP Conference Series: Earth and Environmental Science 1124, no. 1 (January 1, 2023): 012087. http://dx.doi.org/10.1088/1755-1315/1124/1/012087.
Повний текст джерелаSilva, Marcionilo, Ana Sofia Ramos, Maria Teresa Vieira, and Sónia Simões. "Joining of Ti6Al4V to Al2O3 Using Nanomultilayers." Nanomaterials 12, no. 4 (February 21, 2022): 706. http://dx.doi.org/10.3390/nano12040706.
Повний текст джерелаSommer, Niklas, Philipp Kluge, Florian Stredak, Sascha Eigler, Horst Hill, Thomas Niendorf, and Stefan Böhm. "Additive Manufacturing of Compositionally-Graded AISI 316L to CoCrMo Structures by Directed Energy Deposition." Crystals 11, no. 9 (August 30, 2021): 1043. http://dx.doi.org/10.3390/cryst11091043.
Повний текст джерелаBergant, Zoran, Barbara Šetina Batič, Imre Felde, Roman Šturm, and Marko Sedlaček. "Tribological Properties of Solid Solution Strengthened Laser Cladded NiCrBSi/WC-12Co Metal Matrix Composite Coatings." Materials 15, no. 1 (January 4, 2022): 342. http://dx.doi.org/10.3390/ma15010342.
Повний текст джерелаSartowska, Bożena, Jerzy Piekoszewski, Lech Waliś, Marek Barlak, Irene Calliari, Katya Brunelli, Jan Senatorski, and Wojciech Starosta. "Alloying the near Surface Layer of Stainless Steel with Rare Earth Elements (REE) Using High Intensity Pulsed Plasma Beams (HIPPB)." Solid State Phenomena 186 (March 2012): 292–95. http://dx.doi.org/10.4028/www.scientific.net/ssp.186.292.
Повний текст джерелаVasylyev, M. O., B. M. Mordyuk, S. M. Voloshko, and P. O. Gurin. "Microstructure of Co–Cr Dental Alloys Manufactured by Casting and 3D Selective Laser Melting." Progress in Physics of Metals 23, no. 2 (June 2022): 337–59. http://dx.doi.org/10.15407/ufm.23.02.337.
Повний текст джерелаDzhurinskiy, Dmitry, Abhishek Babu, Stanislav Dautov, Anil Lama, and Mayuribala Mangrulkar. "Modification of Cold-Sprayed Cu-Al-Ni-Al2O3 Composite Coatings by Friction Stir Technique to Enhance Wear Resistance Performance." Coatings 12, no. 8 (August 4, 2022): 1113. http://dx.doi.org/10.3390/coatings12081113.
Повний текст джерелаKoenig, Andreas, Julius Schmidtke, Leonie Schmohl, Sibylle Schneider-Feyrer, Martin Rosentritt, Hieronymus Hoelzig, Gert Kloess, et al. "Characterisation of the Filler Fraction in CAD/CAM Resin-Based Composites." Materials 14, no. 8 (April 15, 2021): 1986. http://dx.doi.org/10.3390/ma14081986.
Повний текст джерелаMoreira, Aida B., Laura M. M. Ribeiro, Pedro Lacerda, Ana M. P. Pinto, and Manuel F. Vieira. "A Study on a Cast Steel Reinforced with WC–Metal Matrix Composite." Materials 15, no. 18 (September 6, 2022): 6199. http://dx.doi.org/10.3390/ma15186199.
Повний текст джерелаGuo, X., P. He, K. Xu, X. Ch Lv, J. B. Zhang, and Y. Gu. "Microstructure investigation on the fusion zone of steel/nickel-alloy dissimilar weld joint for nozzle buttering in nuclear power industry." Welding in the World 66, no. 2 (October 9, 2021): 187–94. http://dx.doi.org/10.1007/s40194-021-01199-9.
Повний текст джерелаSimões, M. F., C. Santos, and N. Lima. "The importance of structural diversity of spores in the taxonomy of Aspergillus (section Nigri)." Microscopy and Microanalysis 19, S4 (August 2013): 77–78. http://dx.doi.org/10.1017/s1431927613001001.
Повний текст джерелаTatli, Zafer, Adem Demir, and F. Caliskan. "Carbothermal Reduction and Nitridation of Çanakkale Origin Kaolin for SiAlON Powder Production." Materials Science Forum 554 (August 2007): 169–74. http://dx.doi.org/10.4028/www.scientific.net/msf.554.169.
Повний текст джерелаIorga, Ovidiu, Cristiana Epure, Alexandru Marin, and Dănuț-Eugeniu Moşteanu. "Research Regarding the Properties and Combustion Performance of a Thermal Decoy Pyrotechnic Composition." International conference KNOWLEDGE-BASED ORGANIZATION 28, no. 3 (June 1, 2022): 52–57. http://dx.doi.org/10.2478/kbo-2022-0087.
Повний текст джерелаYuan, Shidan, Ye Ma, Xingyi Li, Zhen Ma, Hui Yang, and Liting Mu. "Fabrication and Microstructure of ZnO/HA Composite with In Situ Formation of Second-Phase ZnO." Materials 13, no. 18 (September 7, 2020): 3948. http://dx.doi.org/10.3390/ma13183948.
Повний текст джерелаRogan Šmuc, Nastja, Nives Kovač, Žan Hauptman, Andrej Šmuc, Matej Dolenec, and Aleš Šoster. "A Detailed Insight into the Detrital and Diagenetic Mineralogy of Metal(oid)s: Their Origin, Distribution and Associations within Hypersaline Sediments." Minerals 11, no. 11 (October 22, 2021): 1168. http://dx.doi.org/10.3390/min11111168.
Повний текст джерелаSimić, Lidija, Rebeka Rudolf, Peter Majerič, and Ivan Anžel. "Cast Microstructure of a Complex Concentrated Noble Alloy Ag20Pd20Pt20Cu20Ni20." Materials 15, no. 14 (July 8, 2022): 4788. http://dx.doi.org/10.3390/ma15144788.
Повний текст джерелаMonajati, Hossein, Mariem Zoghlami, Amevi Tongne, and Mohammad Jahazi. "Assessing Microstructure-Local Mechanical Properties in Friction Stir Welded 6082-T6 Aluminum Alloy." Metals 10, no. 9 (September 16, 2020): 1244. http://dx.doi.org/10.3390/met10091244.
Повний текст джерелаNghipulile, Titus, Thomas Ehongo Moongo, Godfrey Dzinomwa, Sandile Nkwanyana, Benjamin Mapani, and Jaquiline Tatenda Kurasha. "Evaluation of the Relationship between the Milling Breakage Parameters and Mineralogical Data: A Case Study of Three Copper Ores from a Multi-Mineralised Deposit." Minerals 12, no. 10 (October 6, 2022): 1263. http://dx.doi.org/10.3390/min12101263.
Повний текст джерелаNayak, U. Pranav, Florian Schäfer, Frank Mücklich, and María Agustina Guitar. "Wear Induced Sub-surface Deformation Characteristics of a 26 Wt% Cr White Cast Iron Subjected to a Destabilization Heat Treatment." Tribology Letters 71, no. 1 (December 4, 2022). http://dx.doi.org/10.1007/s11249-022-01683-3.
Повний текст джерелаDi Benedetto, Francesco, Andrea Giaccherini, Maurizio Romanelli, Giordano Montegrossi, Elena Belluso, Silvana Capella, Alfonso Zoleo, et al. "A study of radicals in industrial raw cristobalite powders." Physics and Chemistry of Minerals 48, no. 2 (February 2021). http://dx.doi.org/10.1007/s00269-020-01127-1.
Повний текст джерелаGrewal, H. S., H. S. Arora, H. Singh, Anupam Agrawal, and S. Mukherjee. "Improving Erosion Resistance of Hydroturbine Steel Using Friction Stir Processing." Journal of Tribology 136, no. 4 (June 6, 2014). http://dx.doi.org/10.1115/1.4027622.
Повний текст джерелаÖhlin, Oscar, Guocai Chai, and Raveendra Siriki. "Structural Stability of Sandvik 3R60™ After 240 131 Hours Ageing and Creep Test at 700 °C." Transactions of the Indian National Academy of Engineering, November 26, 2021. http://dx.doi.org/10.1007/s41403-021-00298-9.
Повний текст джерелаQuiñones, Javier, Ángel González de la Huebra, and Aurora Martínez Esparza. "Coprecipitation Experiments Using Simulated Spent Fuel Solutions in the Presence of Metallic Iron in Synthetic Bentonitic-Granitic Water Under Oxidising Conditions." MRS Proceedings 824 (2004). http://dx.doi.org/10.1557/proc-824-cc8.9.
Повний текст джерелаSamandi, M., M. Bate, R. Donnan, and S. Miyake. "Microwave Induced Plasma (MIP) Brazing of Silicon Nitride to Stainless Steel." MRS Proceedings 430 (1996). http://dx.doi.org/10.1557/proc-430-113.
Повний текст джерелаFaisal, Nadimul Haque, Nazmi Sellami, Federico Venturi, Tanvir Hussain, Tapas Mallick, Firdaus Muhammad-Sukki, Alex Bishop, Hari Upadhyaya, Nirmal Kumar Katiyar, and Saurav Goel. "Large-scale manufacturing route to metamaterial coatings using thermal spray techniques and their response to solar radiation." Emergent Materials, July 4, 2021. http://dx.doi.org/10.1007/s42247-021-00252-z.
Повний текст джерела