Дисертації з теми "Master thesis in engineering Management"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Master thesis in engineering Management".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Licorish, Sherlock Anthony. "Tool support for social risk mitigation in agile projects a thesis submitted in partial fulfilment of the degree of Master of Computer and Information Sciences (MCIS) at the Auckland University of Technology, Auckland, June 2007 /." Click here to access this resource online, 2007. http://repositoryaut.lconz.ac.nz/theses/1354/.
Повний текст джерелаPrimary supervisor: Anne Philpott. Co-supervisor: Professor Stephen MacDonell. Includes bibliographical references. Also held in print (x, 147 leaves : ill. ; 30 cm.) in City Campus Theses Collection (T 005.12 LIC)
Trella, Fredrik, and Nils Paakkonen. "Development of a Cost-Effective, Reliable and Versatile Monitoring System for Solar Power Installations in Developing Countries : A Minor Field Study as a Master Thesis of the Master Programme in Engineering Physics, Electrical Engineering." Thesis, Uppsala universitet, Fasta tillståndets elektronik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-302815.
Повний текст джерелаHaule, Henrick Joseph. "Evaluation of Traffic Incident Timeline to Quantify the Performance of Incident Management Strategies." UNF Digital Commons, 2018. https://digitalcommons.unf.edu/etd/791.
Повний текст джерелаVargas, Vidal Velez. "Bridge Deck Cracking Investigation and Repair." UNF Digital Commons, 2012. http://digitalcommons.unf.edu/etd/401.
Повний текст джерелаChawla, Lovelesh. "Use of IBM Collaborative Lifecycle Management Solution to Demonstrate Traceability for Small, Real-World Software Development Project." UNF Digital Commons, 2015. http://digitalcommons.unf.edu/etd/606.
Повний текст джерелаFletcher, Charlotte Jane. "Conservation, livelihoods and the role of tourism : a case study of Sukau village in the Lower Kinabatangan District, Sabah, Malaysia : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Natural Resources Management and Ecological Engineering at Lincoln University /." Diss., Lincoln University, 2009. http://hdl.handle.net/10182/1339.
Повний текст джерелаRashmi, Rashmi, and Harini Natarajan. "Master Thesis." Thesis, Malmö högskola, Fakulteten för teknik och samhälle (TS), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20079.
Повний текст джерелаKitali, Angela E. "Bayesian Approach on Quantifying the Safety Effects of Pedestrian Countdown Signals to Drivers." UNF Digital Commons, 2017. http://digitalcommons.unf.edu/etd/729.
Повний текст джерелаKaraer, Alican. "Effects of Traffic Incidents on Adjacent Facilities and Alternative Re-Routing Strategies." UNF Digital Commons, 2018. https://digitalcommons.unf.edu/etd/781.
Повний текст джерелаCastilla, Dalila. "A Hybrid Approach Using RUP and Scrum as a Software Development Strategy." UNF Digital Commons, 2014. http://digitalcommons.unf.edu/etd/514.
Повний текст джерелаGraeff, Matthew Kent. "The Repair of Laterally Damaged Concrete Bridge Girders Using Carbon Fiber Reinforcing Polymers (CFRP)." UNF Digital Commons, 2012. http://digitalcommons.unf.edu/etd/592.
Повний текст джерелаLundberg, David. "Classification of high-frequency FX market data : Master Thesis." Thesis, Uppsala universitet, Avdelningen för systemteknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-256469.
Повний текст джерелаBerg, Niklas, and Tomas Regula. "Challenges in the Current Innovation Audit Practice : KTH Master Thesis Report." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-264069.
Повний текст джерелаInnovation är en förutsättning för en organisations tillväxt och överlevnad. Trots att innovation ses som en viktig förutsättning så har chefer i allmänhet en otydlig bild av deras organisations förmåga att skapa innovation och vilka verktyg som finns tillgängliga för att utvärdera denna förmåga. Forskning visar att scorekort baserade verktyg kan ge värdefulla insikter då en organisations förmåga att skapa innovation utreds. Forskningen visar vidare att det finns svagheter vid den här typen av utvärderingar. Tre problemområden har identifierats. De dimensioner som det scorekort baserade verktyget är baserade på, respondenten som svarar på utvärderingen, samt Likert-skalan som en majoritet av utvärderingsverktygen använder. Problem inom dessa områden påverkar verktygets pålitlighet och giltighet. Syftet med denna studie är att undersöka de nuvarande verktyg för utvärdering av förmågan att skapa innovation genom att granska medarbetares uppfattning om verktyget. Vidare är syftet att med hjälp av litteratur och kvalitativ forskning föreslå förbättringsområden och föra fram idéer som bör beaktas vid framtida utveckling av verktyg för att utvärdera förmågan att skapa innovation. Studien utfördes som en kvalitativ forskning med ett iterativt tillvägagångssätt. Intervjuer genomfördes med nio parter av intresse, och empiriska data har analyserats genom en tematisk analys. Resultatet visar att en organisations förmåga att skapa innovation är svår att mäta och att det finns skepsis huruvida ett verktyg för att mäta förmågan att skapa innovation lyckas med detta eller inte. Vidare existerar problem inom de identifierade områdena av utvärderingsverktygen. Dessa problem påverkar verktygets pålitlighet och giltighet. Ett problem är hur respondenten av utvärderingsverktyget tolkar påståendena eller frågorna och hur de tolkar Likert-skalan. Ett annat problem är det självintresse som kan existera, beroende på vem som deltar i utvärderingen. Idéer för att minimera dessa problem framförs och diskuteras för att öka pålitligheten och giltigheten i verktyget.
Riaz, Bilal. "Logistics Outsourcing Process in Pakson International : Master Thesis in Business Economics." Thesis, Linnéuniversitetet, Ekonomihögskolan, ELNU, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-14048.
Повний текст джерелаMahanga, Mwaka. "Unknown Exception Handling Tool Using Humans as Agents." UNF Digital Commons, 2015. http://digitalcommons.unf.edu/etd/563.
Повний текст джерелаMonteiro, Prema A. "An analysis of student perceptions of the Master of Science Global Hospitality Management concentration." Menomonie, WI : University of Wisconsin--Stout, 2006. http://www.uwstout.edu/lib/thesis/2006/2006monteirop.pdf.
Повний текст джерелаAugustine, Joyal, and Steven Simons. "Improving the surface finish of the rubber weight plate : Master thesis in mechanical engineering." Thesis, Högskolan i Halmstad, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hh:diva-45005.
Повний текст джерелаJohnston, Courteney. "Master or Engineering Management Report. Lessons Learned, Disaster Mitigation Guidelines." Thesis, University of Canterbury. Engineering, 2012. http://hdl.handle.net/10092/7553.
Повний текст джерелаGopali, Gopali. "Protecting Web Applications from SQL Injection Attacks- Guidelines for Programmers Master Thesis." Thesis, Malmö universitet, Fakulteten för teknik och samhälle (TS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-20238.
Повний текст джерелаInjection attack is the most critical web application security risk, and SQL-injection (SQLi) attack is the most reported injection attack on web applications. In this thesis, we have identified the attacking techniques used by attackers and we are also providing guidelines so that the programmers can write web application code in a secure way, to prevent the SQLi attacks.The methodology applied for the research is literature study and we used the way proof by demonstration to get the clear picture. The first step was to find out the coding flaws, then we designed guidelines that can help to protect web applications from SQLi attacks. This thesis will help the programmers to understand the various coding flaws and how those coding flaws can be prevented and for this, we have used proof by demonstration. This thesis will also contribute to the general awareness of SQLi attacks, attack types and guidelines for the programmers who are designing, developing and testing web applications.
Marinakis, Alexandros. "A Systematic Comparison of Default based Versus Hardened IoT Systems Using Honeypots : Master Thesis | Supervisor: Maria Papadaki." Thesis, Luleå tekniska universitet, Institutionen för system- och rymdteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-83187.
Повний текст джерелаAhlgren, Peters Adam. "A SIMULATION WITH FINITE ELEMENTS TO MODEL STEEL SHEET SLITTING : A Master Thesis in Engineering Physics." Thesis, Uppsala universitet, Tillämpad mekanik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-385495.
Повний текст джерелаHenning, Marcus. "Evaluation of the conflict resolution questionnaire a thesis submitted in partial fulfilment of the degree of Master of Business, 2003." Full thesis. Abstract, 2003.
Знайти повний текст джерелаGarip, Omer. "Web-based Thesis Workflow Management System." Youngstown State University / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ysu1588779226055449.
Повний текст джерелаSöderroos, Johan. "Prediction of Expected Life Length of Motor Locks : Master Thesis in Electronics, Mälardalen University." Thesis, Mälardalen University, School of Innovation, Design and Engineering, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-9403.
Повний текст джерелаASSA AB develops different types of products that can be used in or around doors. ASSA offers a complete door solution to the customers. Many of these products are linked together and work for a complete formation of access control. ASSA has recently developed a new communications bus for some of their products. One advantage of the new communication bus is that each product should be able to offer different kinds of added values to the customers.
This master thesis main focus is to find a model to describe the predicted life length of ASSA:s motor lock called 811C50, which includes a study that determine which environmental parameters that can affects the motor locks life length. This master thesis is also a pre-study for further work of an existing motor lock.
The chosen test model, full parameter test, leads to a life length equation. This equation shall later on be implemented in the motor locks so the motor locks itself can predict its own life length. To make the equation completed different parameters, that can affect the motor locks life length, are needed. This can be implemented through different technological tests and to succeed with the test, right test equipment is needed. No establish test equipment was available, which required that new test equipment, which could test all motor locks, were build. On the bases from interviews with engineers at ASSA it was established that the following parameters probably can affect the motor locks life length: temperature, air humidity, dust, corrosion, side load and vibration. Not until certain factors and coefficients have been determined, for the equation, can the equation be used.
ASSA AB är ett företag som utvecklar olika typer av produkter som kan användas i eller runt en dörr. ASSA erbjuder en komplett dörrlösning till kunderna. Många av de här produkterna är sammankopplade och arbetar tillsammans för att komplett passersystem. ASSA har nyligen utvecklat en ny kommunikationsbuss för några av deras produkter. En fördel med den nya kommunikationsbussen är att varje produkt kan ge ett ökat mervärde för slutkunden.
Denna avhandling har som huvudsyfte att hitta en modell som kan beskriva livslängden för ASSA:s motorlås, 811C50. Till detta görs en studie för att undersöka vilka miljö parametrar som kan påverka motorlåsets livslängd. Denna avhandling kan även ses som en förstudie där målet är att vidareutveckla det befintliga motorlåset.
Den valda modellen, full variabel test, leder till en livslängdsekvation. Denna ekvation kommer sedan att bli implementerad i motorlåset så att låset själv kan prediktera sin egen livslängd. För att göra ekvationen komplett behövs olika parameterr som kan påverka motorlåsets livslängd identifieras. Detta kan ske genom olika tekniska test och för att lyckas med testen krävs rätt testutrustning. Ingen befintlig testutrustning fanns tillgänglig vilket resulterade i en ny testutrustning som kunde testa alla motorlås utvecklades. Utifrån intervjuer med ingenjörer på ASSA kunde det fastställas att följande parameterr troligtvis kan påverka motorlåsets livslängd: temperatur, luftfuktighet, damm, korrosion, listtryck och vibrationer. Inte förens koefficienter, till ekvationen, har blivit fastställda är ekvationen färdig att användas.
Öhman, Sebastian. "Wear on Alumina Coated Tools and the Influence of Inclusions when Turning Low-Alloy Steels : Master Thesis - Chemical Engineering." Thesis, Uppsala universitet, Tillämpad materialvetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-302956.
Повний текст джерелаI detta examensarbete, som har utförts vid Sandvik Coromant i Västberga (Stockholm), har en omfattande studie gjorts i syfte att undersöka slitaget på texturerad aluminiumoxid-belagda skärverktyg (Inveio™) vid svarvningen av låglegerade stålsorter. Förslitningsstudier har framförallt gjorts på verktygens spånsidor vid svarvningen av två separata batcher av stålsorten SS2541 efter en inledande ingreppstid på 4 min. Ett särskilt fokus har även ägnats åt att belysa vilken roll stålets inneslutningar kan ha för slitaget av aluminiumoxidbeläggningen. Utvärderingen av verktygsslitaget har gjorts med hjälp av flera olika analytiska tekniker, däribland LOM, SEM, Wyko, Auger-spektrometri (AES), EPMA samt XRD. Resultaten från detta examensarbete visar på att det uppkomna slitaget på de verktyg som har testats kan uppdelas till tre separata och mycket distinkta ”slitagezoner”. Dessa zoner har för detta arbete benämnts som ”nötningsband”. Störst förslitning framträdde initialt i den översta delen av det 3:e nötningsbandet på de testade skärverktygen. Detta område uppvisade ett karaktäristiskt ”lamell”-liknande utseende, bestående av smala och strukturerade åsar och skåror. Vidare uppvisade samtliga undersökta verktyg på förekomsten av påsmetat arbetsmaterial av varierande sammansättning i dessa bildade åsar. När de slitna verktygen undersöktes med djuprofilerande Auger-spektrometri påvisades det att en signifikant mängd kalcium fanns inuti aluminiumoxidbeläggningen. Detta tyder på att en reaktion mellan de kalciuminnehållande inneslutningarna (som finns inuti stålet) och aluminiumoxidbeläggningen har reagerat med varandra under bearbetningsförloppet. Dessa resultat är motsägande till den allmänna uppfattningen om att aluminiumoxid är kemiskt inert vid bearbetningen av stål. Därutöver har dessa resultat även, till författarens kännedom, aldrig tidigare publicerats. Baserat på de resultat som har erhållits från detta examensarbete, och från en omfattande litteraturstudie gällande deformationen av α-aluminiumoxid, har en ny teoretisk förslitningsmodell utarbetats. I denna modell betonas det särskilt att glidningen av hårda inneslutningar från stålet kan aktivera s.k. pyramidala glidsystem i den texturerade aluminiumoxidbeläggningen. Detta orsaker en nano-kristallisering och/eller amorfisering av den översta delen av aluminiumoxidbeläggningen. Denna omvandling tros kunna underlätta den fortsatta förslitningen av dessa belagda skärverktyg.
Boidi, Krishna Verma. "Design, Simulate and Prototype Data Decision System for the Smart Universal Gateway for e-HealthCare System : Master Thesis." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Data- och elektroteknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-14837.
Повний текст джерелаBayer, Emma, and Bustad Gabriel Öberg. "Introducing Risk Management Process to a manufacturing industry : Master thesis in identification of risk avoidance strategies at Coca Cola Enterprises Sweden." Thesis, KTH, Industriell produktion, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-118643.
Повний текст джерелаEn risk kan förklaras som ett tillstånd där det finns en chans att vinna, men också en sannolikhet för förlust. För att vara medveten om en risks existens måste man därför förstå både vad det finns att förlora och vinna. Under de senaste årtiondena har antalet naturkatastrofer och annan extern påverkan ökat. Detta i kombination med att företag idag har globala värdekedjor i allt större utsträckning, har gjort att organisationer utsätter sig för risker till en större grad idag. Därför har betydelsen av att fokusera på riskförmildrande åtgärder ökat. I dryckesindustrin, karaktäriserat av snabbrörliga produkter, kan företag såsom Coca-Cola Enterprises Sweden (CCES) påverkas hårt om störningar sker i deras värdekedja. Risk Management är, enligt ISO 31000, ”koordinerade aktiviteter för att styra och kontrollera riskhantering i en organisation”. En riskhanteringsprocess ämnar därför förmildra negativ påverkan av interna och externa störningar för att undvika till exempel avvikelser i produktion, försämrad produktkvalitet och finansiella förluster. CCES’s kontroll över interna processer och dess störningar baseras främst på reaktiva åtgärder, och företaget har inga riktlinjer för hur de ska identifiera och hantera uppkommande störningar. Syftet med detta projekt har därför varit att identifiera kritiska risker inom företagets leverantörs- och produktionsprocesser och att hitta proaktiva och reaktiva lösningar för att förmildra och undvika störningar. Ytterligare en stor del av projektets syfte har varit att presentera en dynamisk process för hur CCES, samt andra företag, ska organisera en hållbar riskbild. Projektet består av tre huvudsakliga delar; riskidentifiering, riskförmildrande åtgärder och implementering av en riskhanteringsprocess. I den första fasen har verktyget Hazard and Operability (HAZOP) används under workshops för att identifiera och värdera risker. Några av de mest kritiska riskerna som identifierats är; Sabotage under transport från leverantör till CCES, Brist på reservdelar för underhållsarbete, Förlorad produktionstid på grund av för långa dryckesbytartider och Fyller flaskor med för mycket dryck. För att hitta passande reaktiva och proaktiva lösningar för de kritiska riskerna har både intervjuer med anställda genomförts och referensmodellen Supply Chain Reference Model (SCOR) använts. Några av de åtgärder rekommenderade att göra har identifierats till att vara; Låta leverantörerna själva sköta transporter, Standardisera produktbytesprocessen samt skiftöverlämningar och Implementera rutiner för att ha låsta transporter från leverantör till CCES. Strukturen av projektet har använts som en bas för den rekommenderade strukturen på CCE’s fortskridande arbete inom riskhantering. Författarna vill bestryka vikten av att hålla den framtida riskhanteringsprocessen dynamisk och i detta syfte har därför ett riskregister tagits fram för dokumentation och uppföljning. Ett annat sätt att följa upp riskprocessarbetet är att genomföra så kallade audits efter en störning har inträffat. Detta hjälper organisationen både att förstår en störnings påverkan på verksamheten, men fungerar också som ett verktyg för att mäta hur effektivt återhämtningsarbetet efter en störning har varit. Författarna menar också att en dedikerad ägare till riskprocessen är av stor betydelse för ett dynamiskt, framgångsrikt och effektivt riskarbete. En fullständig riskhanteringsprocess har slutligen sammanställts, användbar för många olika typer av organisationer. Genom att göra processen till en del av SCOR-modellen, kan processen i framtiden användas till att identifiera individuella risker inom de fem managementprocesserna Planering, Inköp, Tillverkning, Leverans och Retur för alla SCOR’s medlemsföretag. Därefter menar författarna att en generell kartläggning över de mest kritiska riskerna inom varje managementprocess kan skapas för att dela information och utbyta erfarenheter mellan medlemsföretagen.
Zheng, Man. "Management of an intelligent argumentation network for a web-based collaborative engineering design environment." Diss., Rolla, Mo. : University of Missouri-Rolla, 2007. http://scholarsmine.umr.edu/thesis/pdf/Zheng_09007dcc803e416f.pdf.
Повний текст джерелаVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed April 22, 2008) Includes bibliographical references (p. 33-35).
JUNGÅKER, JONAS. "Monocular depth estimation for level assessment in an industrial waste management environment : A thesis within smart waste management." Thesis, KTH, Skolan för industriell teknik och management (ITM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-303107.
Повний текст джерелаMed den tekniska omvandlingen till Industri 4.0, ledande aktörer i många branscher ställs inför utmaningar såsom hur de ska implementera tekniska lösningar och bibehålla konkurrenskraft. Inom området för smart avfallshantering har många tekniska lösningar presenterats som på ett effektivt sätt mäter soptunnenivåer men ett praktiskt sätt att jämföra dessa lösningar saknas. Från forskning inom Industrial Internet of Things (IIoT) och intervjuer med operatörer på Scania har vi tagit fram ett koncist och konkret sätt att jämföra dessa lösningar med avseende på operativ effektivitet. Tillsammans med detta har vi också tagit fram en djupestimeringsmodell som med hjälp av djupa konvolutionsneuronsnätverk kan mäta fyllnadsvolymen av soptunnor. Vi har visat i vår forskning att detta djupestimeringsnätverk är ett möjligt alternativ till andra sensorer. Vi jämför sedan detta system mot ultraljudssensorer och har funnit att ultraljudssensorerna presterar bättreän djupestimeringsmodellen på flera av de centrala mätvärdena. Trots detta så drog vi slutsatsen att vår metod att mäta fyllnadsvolym av soptunnor med hjälp av djupestimering kan användas tillsammans med objektigenkänning i mer komplexa applikationer för att undvika användandet av enklare sensorer, så som ultraljud.
Ellefors, Simon. "Implementation of a semi-empirical, electrochemistry-based Li-ion battery model for discharge characterization : Master of Science Thesis in Energy Systems." Thesis, Mälardalens högskola, Akademin för ekonomi, samhälle och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-55022.
Повний текст джерелаMollentze, Frederik Jacobus. "Asset management auditing the roadmap to asset management excellence /." Diss., Pretoria : [s.n.], 2005. http://upetd.up.ac.za/thesis/available/etd-01242006-124600.
Повний текст джерелаAlagheband, Ali 1971. "The engineering case study as a basis for the Master of Science thesis : the Teradyne, Inc. case study : a kinematic interface for semiconductor test equipment." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/41430.
Повний текст джерелаIncludes bibliographical references.
A case-study-based Master of Science in Engineering program is proposed. The proposed program would create a mechanism for the generation and maintenance of case studies which address the trade-offs between business and technology ( "Engineering Case Studies"). An example of the Engineering Case method is presented in the form of an Engineering Case Study completed at Teradyne, Inc., a semiconductor test equipment manufacturer. Advantages of the proposed Master's program to the student and to industry are discussed, as are potential uses of the resultant Engineering Case Study in the classroom and in industry.
by Ali Alagheband.
M.S.
Vulli, Srinivasa Shivakar. "Individual-based artificial ecosystems for design and optimization." Diss., Rolla, Mo. : University of Missouri--Rolla [sic] [Missouri University of Science and Technology], 2008. http://scholarsmine.mst.edu/thesis/pdf/Vulli_09007dcc804c5b3b.pdf.
Повний текст джерелаVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed April 18, 2008) Degree granted by Missouri University of Science and Technology, formerly known as University of Missouri-Rolla. Includes bibliographical references (p. 67-73).
Berglund, Viktor. "Improving the packaging of Crosslaminated timber : A master thesis that examines the environment and methods at Martinsons Såg, Bygdsiljum." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-68580.
Повний текст джерелаVelikova, Mariya. "Calibration and Validation of Satellite Altimetry Data over the Pertuis Charentais Region in France: An Analysis of Tidal Correction Impact : Master Thesis Report." Thesis, Luleå tekniska universitet, Rymdteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-70995.
Повний текст джерелаRoberts, Clifton L. "The examination of the current risk-control management system at Malt-O-Meal Company located in Northfield, Minnesota." Online version, 1998. http://www.uwstout.edu/lib/thesis/1998/1998robertsc.pdf.
Повний текст джерелаWatkins, Johannes Andria. "A structured systems approach to model conceptualisation an executive management perspective /." Pretoria : [s.n.], 2000. http://upetd.up.ac.za/thesis/available/etd-07212006-120145/.
Повний текст джерелаOmbete, Kenneth. "Preventing chemical product failure." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2009. http://scholarsmine.mst.edu/thesis/pdf/Ombete_09007dcc80706a6e.pdf.
Повний текст джерелаVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed November 17, 2009) Includes bibliographical references (p. 27-30).
Moëll, Daniel, and Joachim Nordin. "VTOL UAV - A Concept Study." Thesis, Linköping University, Linköping University, Department of Management and Engineering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-15495.
Повний текст джерелаThis thesis deals with the development of a Conceptual Design Tool for unmanned helicopters, so called VTOL UAVs. The goal of the Design Tool is:
• Quick results
• Good accuracy
• Easy to use
The two first points of the goal are actually more or less dependent on each other. In almost all cases a high accuracy gives a slow calculator and vice versa. In order to fulfill the goal a compromise between calculation accuracy and calculation time needs to be done.
To make the Design Tool an easy to use program a graphical user interface is used. The graphical user interface allows the user to systematically work his way thru the program from a fictive mission to a complete design of a helicopter. The pre-requirements on the user have been eliminated to a minimum, but for the advanced user the possibilities to create more specific and complex helicopters are good.
In order to develop a Conceptual Design Tool the entire helicopter needs to be seen as a complete system. To see the helicopter as a system all of the sub parts of a helicopter need to be studied. The sub parts will be compared against each other and some will be higher prioritized than other.
The outline of this thesis is that it is possible to make a user friendly Conceptual Design Tool for VTOL UAVs. The design procedure in the Design Tool is relatively simple and the time from start to a complete concept is relatively short. It will also be shown that the calculation results have a good agreement with real world flight test data.
Tay, Ink. "Fixed asset revaluation : management incentives and market reactions : a thesis submitted in partial fulfilment of the requirements for the degree of Master of Commerce and Management at Lincoln University /." Lincoln University, 2009. http://hdl.handle.net/10182/1555.
Повний текст джерелаCampbell-Macdonald, Daniel. "Congenital nausea this exegesis [thesis] was submitted to the Auckland University of Technology in partial fulfilment of the degree of Master of Arts (Art and Design), 2003 /." Full thesis. Abstract, 2003.
Знайти повний текст джерелаNot all images visible in e-thesis. Also held in print (45 leaves, ill., CD-ROM, 30 cm.) in Wellesley Theses Collection. (T 709.93 CAM)
Qandour, Amro. "Application framework for wireless sensor networks [thesis]." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2012. https://ro.ecu.edu.au/theses/472.
Повний текст джерелаCameron, Ann. "Information and communication technology in Auckland hotels context and impact : thesis submitted to Auckland University of Technology University in fulfilment of the degree of Master of Philosophy, April 2007 /." Click here to access this resource online, 2007. http://aut.researchgateway.ac.nz/handle/10292/212.
Повний текст джерелаFrederick, Armstrong. "Processing and characterisation of nano-enhanced composites this thesis issubmitted in fulfilment of the degree of Master of Engineering by research, February 2008 /." Click here to access this resource online, 2008. http://hdl.handle.net/10292/804.
Повний текст джерелаJohnson, Jeremy Ryan. "Fault propagation timing analysis to aid in the selection of sensors for health management systems." Diss., Rolla, Mo. : University of Missouri--Rolla i.e. [Missouri University of Science and Technology], 2008. http://scholarsmine.mst.edu/thesis/pdf/Johnson_09007dcc804bcda7.pdf.
Повний текст джерелаVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed May 19, 2008) Degree granted by Missouri University of Science and Technology, formerly known as University of Missouri--Rolla. Includes bibliographical references (p. 39-41).
Durrant, Christine. "An exploration of inter-firm knowledge transfer in multinational organisations a thesis submitted to Auckland University of Technology in partial fulfilment of the degree of Master of Business Studies /." Click here to access this resource online, 2004. http://repositoryaut.lconz.ac.nz/theses/1373/.
Повний текст джерелаArtola, Bixente. "Scoop optimization : A preliminary study." Thesis, KTH, Energiteknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-249672.
Повний текст джерелаGoswami, Mohit. "Application of product family design for engineered systems in changing market space." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2008. http://scholarsmine.mst.edu/thesis/pdf/Goswami_09007dcc804feafa.pdf.
Повний текст джерелаVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed May 19, 2008) Includes bibliographical references (p. 33-35).
Day, Rachel Marie. "Verifying module heuristics for large scale products." Diss., Rolla, Mo. : Missouri University of Science and Technology, 2009. http://scholarsmine.mst.edu/thesis/pdf/Day_09007dcc8063deea.pdf.
Повний текст джерелаVita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed April 27, 2009) Includes bibliographical references.
Berzin, Oleg Daryoush Afshin Samimi. "Mobility management architecture and modeling for label switched networks (mobility label based network) a thesis /." Philadelphia, Pa. : Drexel University, 2010. http://hdl.handle.net/1860/3217.
Повний текст джерела