Добірка наукової літератури з теми "Mapping optimisation"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Mapping optimisation".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Mapping optimisation"
Pastellides, Stavros, Stiaan Gerber, Rong-Jie Wang, and Maarten Kamper. "Evaluation of Drive Cycle-Based Traction Motor Design Strategies Using Gradient Optimisation." Energies 15, no. 3 (February 1, 2022): 1095. http://dx.doi.org/10.3390/en15031095.
Повний текст джерелаPereira, Helder, Tom A. Jackson, Simon Claridge, Jonathan M. Behar, Cheng Yao, Benjamin Sieniewicz, Justin Gould, et al. "Comparison of Echocardiographic and Electrocardiographic Mapping for Cardiac Resynchronisation Therapy Optimisation." Cardiology Research and Practice 2019 (February 21, 2019): 1–9. http://dx.doi.org/10.1155/2019/4351693.
Повний текст джерелаLu, A., G. Stenz, H. Eisenmann, and F. M. Johannes. "Technology mapping for simultaneous gate and interconnect optimisation." IEE Proceedings - Computers and Digital Techniques 146, no. 1 (1999): 21. http://dx.doi.org/10.1049/ip-cdt:19990245.
Повний текст джерелаEcheverría, D., D. Lahaye, L. Encica, and P. W. Hemker. "Optimisation in electromagnetics with the space‐mapping technique." COMPEL - The international journal for computation and mathematics in electrical and electronic engineering 24, no. 3 (September 2005): 952–66. http://dx.doi.org/10.1108/03321640510598265.
Повний текст джерелаLei, Xu, Bin Feng, Guiping Wang, Weiyu Liu, and Yalin Yang. "A Novel FastSLAM Framework Based on 2D Lidar for Autonomous Mobile Robot." Electronics 9, no. 4 (April 24, 2020): 695. http://dx.doi.org/10.3390/electronics9040695.
Повний текст джерелаLanglais, C., and M. Hélard. "Mapping optimisation for turbo-equalisation improved by iterative demapping." Electronics Letters 38, no. 22 (2002): 1365. http://dx.doi.org/10.1049/el:20020886.
Повний текст джерелаPanesar, Ajit, David Brackett, Ian Ashcroft, Ricky Wildman, and Richard Hague. "Hierarchical remeshing strategies with mesh mapping for topology optimisation." International Journal for Numerical Methods in Engineering 111, no. 7 (February 7, 2017): 676–700. http://dx.doi.org/10.1002/nme.5488.
Повний текст джерелаMiao, Yu, Alan Hunter, and Ioannis Georgilas. "Parameter Reduction and Optimisation for Point Cloud and Occupancy Mapping Algorithms." Sensors 21, no. 21 (October 22, 2021): 7004. http://dx.doi.org/10.3390/s21217004.
Повний текст джерелаGlover, B. M. "Locally compactly Lipschitzian mappings in infinite dimensional programming." Bulletin of the Australian Mathematical Society 47, no. 3 (June 1993): 395–406. http://dx.doi.org/10.1017/s0004972700015227.
Повний текст джерелаLi, Taiyong, and Yihong Xu. "The Strictly Efficient Subgradient of Set-Valued Optimisation." Bulletin of the Australian Mathematical Society 75, no. 3 (June 2007): 361–71. http://dx.doi.org/10.1017/s0004972700039290.
Повний текст джерелаДисертації з теми "Mapping optimisation"
Kim, Dae Gyu. "Mapping based constraint handling methods for evolutionary algorithms." Thesis, University of Sussex, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.311406.
Повний текст джерелаKianifar, Mohammed R. "Application of multidisciplinary design optimisation frameworks for engine mapping and calibration." Thesis, University of Bradford, 2014. http://hdl.handle.net/10454/14843.
Повний текст джерелаSkoglund, Martin. "Inertial Navigation and Mapping for Autonomous Vehicles." Doctoral thesis, Linköpings universitet, Reglerteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-110373.
Повний текст джерелаLINK-SIC
Rountree, Lindsay. "Optimisation of perimetric stimuli for mapping changes in spatial summation in glaucoma." Thesis, Cardiff University, 2018. http://orca.cf.ac.uk/111180/.
Повний текст джерелаLittle, Collin. "Sono degradation of phenanthrene : mapping & optimisation of reactor conditions using sono-chemi-luminescence." Thesis, Glasgow Caledonian University, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.688256.
Повний текст джерелаAkinyemi, Segun Ajayi. "Optimisation of selective extraction techniques as a tool for geochemical mapping in the Southern Africa region." Thesis, University of the Western Cape, 2008. http://etd.uwc.ac.za/index.php?module=etd&action=viewtitle&id=gen8Srv25Nme4_3444_1260521237.
Повний текст джерелаThe complex nature and composition of regolith cover in Southern Africa is a major challenge to geochemical mapping for concealed mineralization. Some of the setbacks to successful geochemical exploration may be ascribed to the use of various partial extraction techniques,without a profound understanding of the regolith components and their composition. This investigation therefore focuses on the use of hydroxylamine partial extraction geochemistry for geochemical mapping in regolith over two contrasting environments viz
aeolian sand-calcrete regolith over Au mineralization at Amalia Blue Dot Mine in South Africa and lateritic regolith covering the Ni-Cu deposit at Kabanga Main and Luhuma in Tanzania. Regolith samples from the above areas were sieved and extracted with hydroxylamine hydrochloride solution and analyzed for multi-element by AAS and ICP-MS techniques. A stepwise optimization of the hydroxylamine extraction technique of samples from both areas was carried out and incorporated into the analytical programme (in a pilot study). Results of hydroxylamine partial extraction generally gave better anomaly contrast and reflection of bedrock mineralization than the conventional aqua regia techniques that were previously used in the region. The results however show that lateritic regolith may be best extracted using 0.25M hydroxylamine while 0.1M concentration appears most suitable for extraction of aeolian-calcrete regolith. The above results are corroborated by principal component analysis of the analytical data that show various element associations, e.g. with Fe-Mn oxides while others possibly belong to the loosely adsorbed or exchangeable group. The 
gochemical maps in the pilot study areas at Amalia, Kabanga and Luhuma show elevated element contents or clusters of anomalies of diverse elements associated with Fe-Mn oxides. Geochemical mapping at Kabanga with deeply concealed mineralization however shows variability of subdued element patterns over mineralized areas. Geochemical signatures associated with hydroxylamine hydrochloride partial leach are therefore characterized by a lower geochemical background than that using conventional aqua regia leach. This study leads recommending for further investigations into partial extraction of the exchangeable group of elements, possibly using ammonium acetate.
Führ, Gereon [Verfasser], Rainer [Akademischer Betreuer] Leupers, and Tobias [Akademischer Betreuer] Gemmeke. "MPSoC power-performance trade-off : strategies for SW mapping optimisation / Gereon Führ ; Rainer Leupers, Tobias Gemmeke." Aachen : Universitätsbibliothek der RWTH Aachen, 2021. http://d-nb.info/123314426X/34.
Повний текст джерелаZaharia, Mihai Valentin. "Contributions à l’étude des machines à reluctance variable pour application alterno-démarreur automobile." Thesis, Ecole centrale de Lille, 2016. http://www.theses.fr/2016ECLI0022/document.
Повний текст джерелаThe switched reluctance machine has a simple construction making it cheaper in execution but one of the drawbacks of this machine is the torque ripple. This thesis had as first target, the usage of an optimization tool to calculate the best control parameters to correct this major drawback in motor and generator operation modes. Hence, an analytical model that takes into account the machine geometry and that is able to be simulated in both operation modes by adjusting the commutation angles was provided and implemented in a calculation environment. The second target of this work is to investigate a method to reduce the optimization time without lowering the accuracy of the results. The strategy used in the optimization process is known in literature as the space mapping technique, more precisely for this thesis output space mapping proportional and manifold mapping were studied. After testing them on a mathematical model it was possible to continue the investigation on defining the optimal control parameters of a three-phases 6/8 SR machine prototype, being able that further to use this strategy in a much complicated process, i.e. defining the right geometry and control of a SR machine to be used in automotive integrated starter alternator systems. The final target of the thesis was to conduct experiments and tests on the existing prototype in order to partially validate the results of the optimization process
Nhan, Nhat-Quang. "Optimisation de précodeurs linéaires pour les systèmes MIMO à récepteurs itératifs." Thesis, Brest, 2016. http://www.theses.fr/2016BRES0062/document.
Повний текст джерелаThe long-term evolution (LTE) and the LTE-Advanced (LTE-A) standardizations are predicted to play essential roles in the future fifth-generation (5G) mobile networks. These standardizations require high data rate and high quality of service, which assures low error-rate and low latency. Besides, as discussed in the recent surveys, low complexity communication systems are also essential in the next 5G mobile networks. To adapt to the modern trend of technology, in this PhD thesis, we investigate the multiple-input multiple-output (MIMO) wireless communication schemes. In the first part of this thesis, low-complex forward error correction (FEC) codes are used for low complexity and latency. By considering iterative receivers at the receiver side, we exploit MIMO linear precoding and mapping methods to optimize the error-rate performance of these systems. In the second part of this thesis, non-binary low density parity check (NB-LDPC) codes are investigated. We propose to use MIMO precoders to reduce the complexity for NB-LDPC encoded MIMO systems. A novel low complexity decoding algorithm for NB-LDPC codes is also proposed at the end of this thesis
Hassani, Bijarbooneh Farshid. "Constraint Programming for Wireless Sensor Networks." Doctoral thesis, Uppsala universitet, Avdelningen för datalogi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-241378.
Повний текст джерелаProFuN
Частини книг з теми "Mapping optimisation"
Lin, Xiaochun, Erik Dagless, and Aiguo Lu. "Technology mapping of LUT based FPGAs for delay optimisation." In Field-Programmable Logic and Applications, 245–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/3-540-63465-7_229.
Повний текст джерелаPaviotti, Marco, Simon Cooksey, Anouk Paradis, Daniel Wright, Scott Owens, and Mark Batty. "Modular Relaxed Dependencies in Weak Memory Concurrency." In Programming Languages and Systems, 599–625. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-44914-8_22.
Повний текст джерелаFühr, Gereon, Ahmed Hallawa, Rainer Leupers, Gerd Ascheid, and Juan Fernando Eusse. "3D Optimisation of Software Application Mappings on Heterogeneous MPSoCs." In Architecture of Computing Systems – ARCS 2020, 56–68. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-52794-5_5.
Повний текст джерелаRosseel, J., F. Catthoor, T. Gijbels, P. Six, L. Van Gool, and H. De Man. "An Optimisation Methodology for Mapping a Diffusion Algorithm for Vision into a Modular and Flexible Array Architecture." In Algorithms and Parallel VLSI Architectures III, 131–41. Elsevier, 1995. http://dx.doi.org/10.1016/b978-044482106-5/50012-0.
Повний текст джерелаFalzon, Geoffrey, and Maozhen Li. "Evaluating Heuristics for Scheduling Dependent Jobs in Grid Computing Environments." In Evolving Developments in Grid and Cloud Computing, 31–46. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-4666-0056-0.ch003.
Повний текст джерелаFalzon, Geoffrey, and Maozhen Li. "Evaluating Heuristics for Scheduling Dependent Jobs in Grid Computing Environments." In Grid and Cloud Computing, 1099–113. IGI Global, 2012. http://dx.doi.org/10.4018/978-1-4666-0879-5.ch505.
Повний текст джерелаТези доповідей конференцій з теми "Mapping optimisation"
Thurman, Edward, James Riordan, and Daniel Toal. "Automated Optimisation of Simultaneous Multibeam and Sidescan Sonar Seabed Mapping." In OCEANS 2007 - Europe. IEEE, 2007. http://dx.doi.org/10.1109/oceanse.2007.4302324.
Повний текст джерелаCandaele, Bernard, Sylvain Aguirre, Michel Sarlotte, Iraklis Anagnostopoulos, Sotirios Xydis, Alexandros Bartzas, Dimitris Bekiaris, et al. "Mapping Optimisation for Scalable Multi-core ARchiTecture: The MOSART Approach." In 2010 IEEE Computer Society Annual Symposium on VLSI (ISVLSI). IEEE, 2010. http://dx.doi.org/10.1109/isvlsi.2010.71.
Повний текст джерелаSrikumaran, S., and S. Sivaloganathan. "Design Optimisation Through Feature Mapping for High Value Added Components: Manufacturing Perspective." In ASME 2005 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASME, 2005. http://dx.doi.org/10.1115/detc2005-85594.
Повний текст джерелаSayuti, M. Norazizi Sham Mohd, and Leandro Soares Indrusiak. "A Function for Hard Real-Time System Search-Based Task Mapping Optimisation." In 2015 IEEE 18th International Symposium on Real-Time Distributed Computing (ISORC). IEEE, 2015. http://dx.doi.org/10.1109/isorc.2015.37.
Повний текст джерелаBooth, Peter, and Glenn Meyer. "Quarry wall stability and design optimisation using photogrammetric mapping and analysis techniques." In 2013 International Symposium on Slope Stability in Open Pit Mining and Civil Engineering. Australian Centre for Geomechanics, Perth, 2013. http://dx.doi.org/10.36487/acg_rep/1308_65_booth.
Повний текст джерелаVincekovic, Luka, Alistair John, Ning Qin, and Shahrokh Shahpar. "Exploring Topology Optimisation of High Pressure Turbine Blade Tips." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-16059.
Повний текст джерелаSayuti, M. Norazizi Sham Mohd, and Leandro Soares Indrusiak. "Simultaneous Optimisation of Task Mapping and Priority Assignment for Real-Time Embedded NoCs." In 2015 23rd Euromicro International Conference on Parallel, Distributed and Network-Based Processing (PDP). IEEE, 2015. http://dx.doi.org/10.1109/pdp.2015.84.
Повний текст джерелаZhou, Zheng-Shu, Peter Caccetta, Eric Lehmann, Alex Held, Stephen McNeill, Anthea Mitchell, Anthony Milne, Ian Tapley, and Kim Lowell. "Dual polarised Entropy/alpha decomposition and coherence optimisation for improved forest height mapping." In IGARSS 2011 - 2011 IEEE International Geoscience and Remote Sensing Symposium. IEEE, 2011. http://dx.doi.org/10.1109/igarss.2011.6050096.
Повний текст джерелаSacanamboy, Maribell, Luis Quesada, Freddy Bolanos, Alvaro Bernal, and Barry O'Sullivan. "A Comparison between Two Optimisation Alternatives for Mapping in Wireless Network on Chip." In 2016 IEEE 28th International Conference on Tools with Artificial Intelligence (ICTAI). IEEE, 2016. http://dx.doi.org/10.1109/ictai.2016.0145.
Повний текст джерелаLim, Serena, Kayvan Pazouki, and Alan J. Murphy. "Holistic Energy Mapping Methodology for Reduced Fuel Consumption and Emissions." In ASME 2017 36th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/omae2017-61945.
Повний текст джерела