Готові списки джерел за темами / Manufacturing processes Australia

Добірка наукової літератури з теми "Manufacturing processes Australia"

Автор: Grafiati
Опубліковано: 10 грудня 2022
Оновлено: 29 січня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Manufacturing processes Australia".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Manufacturing processes Australia"

1

Morrison, Philip S. "Migrants, manufacturing and metropolitan labour markets in Australia." Australian Geographer 21, no. 2 (November 1990): 151–63. http://dx.doi.org/10.1080/00049189008703011.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Sandu, Nitirajsingh, and Ergun Gide. "Investigation of challenges and opportunities for the adoption of cloud-based Internet of things (IoT) in Australian agricultural SME." Global Journal of Information Technology: Emerging Technologies 7, no. 3 (December 24, 2017): 116–27. http://dx.doi.org/10.18844/gjit.v7i3.2833.

Повний текст джерела
Анотація:
Increasing adoption of the Internet of things (IoT) is bringing revolutionary changes in the agricultural, manufacturing, retailing and finance industries, as they improve the existing business processes and reduce cost. IoT is seen as a powerful tool for agricultural SMEs in Australia, with the potential to transform farming and food production into a smart web of interconnected objects and, thus, improve the general productivity and sustainability of the food chain. However, as some of the innovative solutions may need to store the data locally on the device, and mostly on the cloud, it raises serious privacy and regulatory concerns. This paper used a pilot online survey to investigate the challenges and opportunities for adoption of IoT for Australian SMEs in agriculture and it is expected that it will help application and solution providers to address any issues that may arise in the Australian scenario. Keywords: Internet of things, cloud systems, small-to-medium enterprises, adoption issue, agriculture, Australia.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Hinal Patel, Albert Wertheimer, and Qian Ding. "Comparison of Drug Withdrawal Processes in the U.S. and Other Nations." INNOVATIONS in pharmacy 12, no. 3 (July 1, 2021): 5. http://dx.doi.org/10.24926/iip.v12i3.3939.

Повний текст джерела
Анотація:
Medications have been withdrawn from as early as the 1900’s in several countries due to a variety of reasons. Most drugs have been withdrawn due to safety, efficacy, manufacturing issues, or the toxicities they address. While safety and efficacy of each new drug is taken into account, so is the process of drug withdrawal. Worldwide each country has its own medical agency which have different approaches on drug discovery and method of removal from the market. This removal process is simpler in several nations while more prolonged in others. Nevertheless, we still don’t know an effective method of drug removal from the market and therefore that is the focus of this paper. This paper explores the drug withdrawal process in several countries due to hepatic and cardiovascular toxicities using the WITHDRAWN database. It also summarizes and compares the drug removal processes in the U.S., Australia, UK, EU, and Canada. Consequently, there was no data or evidence that supported one country more favorable or rapid than the other. However, based on the results from drug withdrawal processes, it appeared the U.S., UK, and EU were most comparable. Meanwhile, Australia appeared to have the lengthiest process.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Morkel, André, and John Syme. "THE ELECTRONICS MANUFACTURING INDUSTRY IN WESTERN AUSTRALIA: TECHNOLOGICAL INNOVATION IN A MIDDLE ECONOMY." Prometheus 4, no. 1 (June 1986): 93–110. http://dx.doi.org/10.1080/08109028608629588.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Ben-Tovim, David I., Jane E. Bassham, Denise Bolch, Margaret A. Martin, Melissa Dougherty, and Michael Szwarcbord. "Lean thinking across a hospital: redesigning care at the Flinders Medical Centre." Australian Health Review 31, no. 1 (2007): 10. http://dx.doi.org/10.1071/ah070010.

Повний текст джерела
Анотація:
Lean thinking is a method for organising complex production processes so as to encourage flow and reduce waste. While the principles of lean thinking were developed in the manufacturing sector, there is increasing interest in its application in health care. This case history documents the introduction and development of Redesigning Care, a lean thinking-based program to redesign care processes across a teaching general hospital. Redesigning Care has produced substantial benefits over the first two-and-a-half years of its implementation, making care both safer and more accessible. Redesigning Care has not been aimed at changing the specifics of clinical practice. Rather, it has been concerned with improving the flow of patients through clinical and other systems. Concepts that emerged in the manufacturing sector have been readily translatable into health care. Lean thinking may play an important role in the reform of health care in Australia and elsewhere.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Wilson, Arron, Joel B. Johnson, Ryan Batley, Pawan Lal, Lara Wakeling, and Mani Naiker. "Authentication Using Volatile Composition: A Proof-of-Concept Study on the Volatile Profiles of Fourteen Queensland Ciders." Beverages 7, no. 2 (May 25, 2021): 28. http://dx.doi.org/10.3390/beverages7020028.

Повний текст джерела
Анотація:
Although relatively small, the Australian cider industry has experienced significant growth in recent years. One of the current challenges in the industry is the lack of research specific to Australian ciders. Establishing baseline volatile organic compound (VOC) profiles of Australian cider is paramount to developing a better understanding of the industry. This understanding may ultimately be utilized for both the categorization and authentication of existing ciders, and the targeted modification of cider volatiles for the development and improvement of cider quality. This study utilized gas chromatography, coupled with mass spectrometry, to identify key VOCs present in 14 ciders sourced from four different manufacturers in Queensland, Australia. A total of 40 VOCs were identified across the ciders, with significant variation depending on the flavor and manufacturer. Principal component analysis indicated that the ciders were well-separated based on the manufacturer, supporting the prospect of using the volatile composition to discriminate between cider manufacturers. Furthermore, hierarchical cluster analysis highlighted the commonalities and differences in cider composition between different manufacturers, which may be indicative of the varying ingredients and manufacturing processes used to create the ciders. Future studies profiling the volatile composition of larger numbers of Australian ciders are recommended to support the use of this analytical technique for authentication purposes. Likewise, exploration of the relationship between specific processes and VOCs is recommended to fortify an understanding of how to optimize cider production to improve consumer satisfaction.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Danej, Meghna, Ronak Dedania, Sanket Gandhi, Juhi Randeria, and Kankrej Gaurav. "Regulatory requirements for Drug master file in context to Canada and Australia." International Journal of Drug Regulatory Affairs 6, no. 2 (June 15, 2018): 41–47. http://dx.doi.org/10.22270/ijdra.v6i2.236.

Повний текст джерела
Анотація:
Drug Master Files are required in most countries as supporting documents for the registration of drug products. DMFs generally contain information pertaining to the chemistry, manufacturing and controls (CMC) sections of the drug submission and reflect the drug’s identity, strength, purity and quality. Canada and Australia which are consider as highly regulated markets (HRMs). In CANADA, DMF filing was done through New Drug Submission (NDS) for both drugs and biologic products. They use MF terminology for DMF which contain four types of MASTER FILE- ASMFs, CCS MFs, Excipient MFs, Drug product MFs. In AUSTRALIA different application processes and regulatory requirements apply depending on the type of therapeutic goods that is applied. They consist of eight phase for DMF registration. Where EU guidelines adopted in Australia include references to EU legislation. Now from 2016 onwards most of the regulated countries will use eCTD or their electronic format for their DMF submission. Compare DMF regulatory requirements in the above-mentioned countries so that reader can have clear idea on how to file DMF.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Langston, Craig, and Weiwei Zhang. "DfMA: Towards an Integrated Strategy for a More Productive and Sustainable Construction Industry in Australia." Sustainability 13, no. 16 (August 17, 2021): 9219. http://dx.doi.org/10.3390/su13169219.

Повний текст джерела
Анотація:
Design for manufacture and assembly (DfMA) is an important part of the future of the construction industry due to the promise of speed of project delivery, quality control, worker safety, and waste minimization onsite via the purposeful design for manufacture and assembly offsite. However, the adoption of DfMA in Australia has been slow. This paper investigates the barriers prohibiting widespread uptake and how digital construction will be a catalyst for improving use on commercial-scale projects. A total of six leading experts were interviewed to elicit their opinions, and seven recent case studies of high-rise modular apartment and hotel buildings constructed by Hickory were cross-referenced as evidence of DfMA capability. The experts suggested that the reasons for slow adoption in Australia were community mindset, government regulations and incentives, planning and building codes, unionization and business politics, finance, and supply chain management. The case studies suggest that compatible building type and transportation distance are also factors. These barriers can be addressed by the clever integration of building information modelling tools with lean construction processes as part of a proposed strategy leading to smarter (more productive) and better (more sustainable) outcomes predicated on growth in digital construction practices. The paper concludes with a proposed framework for change that conceptualizes the ‘ecosystem’ needed to support widespread DfMA in the Australian context, including the paradigm shift from building to manufacturing/assembly, the displacement of workers from onsite to offsite activity, and the expansion of interdisciplinary design and construct collaboration.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

WIJEWARDENA, HEMA, and ANURA DE ZOYSA. "THE IMPACT OF FINANCIAL PLANNING AND CONTROL ON PERFORMANCE OF SMEs IN AUSTRIALIA." Journal of Enterprising Culture 09, no. 04 (December 2001): 353–65. http://dx.doi.org/10.1142/s0218495801000195.

Повний текст джерела
Анотація:
Although there has been some discussion in the academic literature on the relationship between planning and performance of small and medium enterprises(SMEs), no prior research has attempted to capture the control aspect of planning and its possible impact on performance. Furthermore, most of the studies on this aspect have been concentrating on long-range strategic planning with little attention being devoted to financial planning based on annual budgeting. Therefore, based on the results of a study involving a questionnaire survey of budgetting and budgetary control processes of 473 manufacturing SMEs in Australia, this paper attempts to provide an analysis of the impact of both financial planning and control of the sample firms on their performance. The results reveal that greater comprehensiveness in both financial plannig and control processes leads to higher sales performance of these firms.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Purves, Nigel, and Scott J. Niblock. "Predictors of corporate survival in the US and Australia: an exploratory case study." Journal of Strategy and Management 11, no. 3 (August 20, 2018): 351–70. http://dx.doi.org/10.1108/jsma-06-2017-0044.

Повний текст джерела
Анотація:
Purpose The purpose of this paper is to investigate the relationship of financial ratios and non-financial factors of successful and failed corporations in the USA. Specifically, the authors provide evidence on whether financial ratios and non-financial factors can be jointly included as indicators to improve the predictive capacity of organisational success or failure in different countries and sectors. Design/methodology/approach The paper utilises a mixed method exploratory case study focussing on listed corporations in the US and Australian manufacturing, agriculture, finance and property sectors. Findings The financial ratio findings demonstrate that (with the exception of the failed Australian manufacturing sector) the integrated multi-measure (IMM) ratio approach consistently provides a higher classification rate for the failed and successful groups than those provided by an individual measure. In all cases the IMM method scored higher for US companies (with the exception of the failed Australian property sector). The findings also show that irrespective of the country location or sector, non-financial factors such as board composition and managements’ involvement in organisational strategy impact on a corporation’s success or failure. Practical implications The findings reveal that non-financial factors occur prior to financial ratios when attempting to predict organisational success or failure and the IMM approach enables a more thorough examination of the predictive ability of financial ratios for US and Australian organisations. This intuitively indicates that when combined with financial ratios, non-financial factors may be a useful predictor of corporate success or failure across countries and sectors. Originality/value Sound internal processes and the identification of both financial ratios and non-financial factors can be utilised to improve the reliability of financial failure models, enable corrective and preventative steps to be implemented by management and potentially reduce the costs of failure for US and Australian organisations.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Manufacturing processes Australia"

1

S.A.) International Manufacturing Leaders Forum (2002 Adelaide. Leadership of the future in manufacturing: Proceedings : 8-10 February 2002, Adelaide Australia. Mawson Lakes, S.Aust: Centre for Advanced Manufacturing Research, 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Asia Pacific Conference on Materials Processing (9th 2010 Sydney, N.S.W.). Advances in materials processing IX: Selected, peer reviewed papers from the 9th Asia Pacific Conference on Materials Processing (APCMP2010), 7-10 June 2010, Sydney, Australia. Stafa-Zurich, Switzerland: Trans Tech Publications Ltd., 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

editor, Tieu A. Kiet, Zhu Hong-tao editor, and Zhu Qiang editor, eds. Advances in materials and processing technologies XV: Selected, peer reviewed papers from the 15th International Conference on Advances in Materials and Processing Technologies (AMPT 2012), September 23-26, 2012, Wollongong, Australia. Durnten-Zurich, Switzerland: Trans Tech Publications Ltd, 2014.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Boow, James. Early Australian commercial glass: Manufacturing processes. [Sydney: Dept. of Planning & Heritage Council of New South Wales], 1991.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Bruce, McKern, and Praiphol Koomsup, eds. Minerals processing in the industrialisation of ASEAN and Australia. Sydney: Allen & Unwin, 1988.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Manufacturing processes Australia"

1

Hibbert, D. Brynn. "Accreditation." In Quality Assurance in the Analytical Chemistry Laboratory. Oxford University Press, 2007. http://dx.doi.org/10.1093/oso/9780195162127.003.0013.

Повний текст джерела
Анотація:
Accreditation is the procedure by which the competence of a laboratory to perform a specified range of tests or measurements is assessed against a national or international standard. The accreditation covers the kinds of materials tested or measured, the procedures or methods used, the equipment and personnel used in those procedures, and all relevant systems that the laboratory has in place. Once accredited, the laboratory is entitled to endorse test results with their accreditation status which, if it has any validity, is an imprimatur of some degree of quality and gives the client added confidence in the results. Accreditation therefore benefits the laboratory, by allowing the laboratory to demonstrate competence in particular tests, and the client, by providing a choice of accredited laboratories that are deemed competent. Accreditation is part of conformity assessment in international trade. Conformity assessment leads to the acceptance of the goods of one country by another, with confidence borne of mutual recognition of manufacturing and testing procedures. Figure 9.1 shows the relation between accreditation and the goal of conformity in trade. For accreditation to be a cornerstones of conformity in trade, each laboratory that is assessed, in whatever country, must be judged against the same standard (e.g., ISO/IEC 17025), and the assessment process must be essentially the same from one country to another. The standards are indeed international, through the International Organization for Standardization (ISO), and the accreditation bodies themselves are scrutinized under the auspices of the International Laboratory Accreditation Co-operation (ILAC), being accredited to the ISO/IEC Standard 17011 (ISO/IEC 2004a). Full membership in ILAC is open to recognized bodies that operate accreditation schemes for testing laboratories, calibration laboratories, and inspection bodies that have been accepted as signatories to the ILAC Mutual Recognition Arrangement. They must maintain conformance with appropriate international standards such as ISO/IEC 17011 and ILAC guidance documents, and the must ensure that all their accredited laboratories comply with ISO/IEC 17025 and related ILAC guidance documents. Table 9.1 lists the full members and signatories of the ILAC Mutual Recognition Arrangement. The National Association of Testing Authorities (NATA) of Australia has the distinction of being the first accreditation body in the world (founded in 1947), and has long been in the vanguard of the approach to quality through accreditation.
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Manufacturing processes Australia"

1

Mostafa, Sherif, and Jantanee Dumrak. "Alignment of Leagile Strategies With Off-site Manufacturing: Application of ANP in Australian Housing Supply." In International Symposium on the Analytic Hierarchy Process. Creative Decisions Foundation, 2014. http://dx.doi.org/10.13033/isahp.y2014.021.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Alam, Firoz, and Reza N. Jazar. "An Experimental Study of Acid Exposed Fibre Reinforced Plastic Gratings." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64152.

Повний текст джерела
Анотація:
Fibre Reinforced Plastics (FRPs) generally have greater advantages over conventional materials for their structural properties. However, the service life can significantly be shortened if the fibre reinforced plastics are exposed to adverse environmental conditions especially acid vapour, humidity and high temperature. In many chemical industrial plants in Australia and elsewhere fibre reinforced plastic gratings are used as structural components of stairs and passages where they are subjected to varying degrees of fluosilicic acid, a byproduct of the industrial manufacturing process. As currently no experimental data on the effects of fluosilicic acid on FRPs is available in the public domain, it is difficult to predict the service life of FRPs with some certainty. In order to understand the structural strength of fluosilicic acid exposed FRPs, an experimental study was undertaken. A series of specimens from various locations of a chemical plan in Australia were acquired and studied. Some new specimens (not exposed to acid, humidity and high temperature) were also studied to provide a benchmark for the comparison. The results indicated that the long time exposure to harsh environment and acid vapour can significantly deteriorate the flexural strength and service life of FRPs.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Smith, Michael C., Ondrej Mura´nsky, Philip J. Bendeich, and Lyndon Edwards. "The Impact of Key Simulation Variables on Predicted Residual Stresses in Pressuriser Nozzle Dissimilar Metal Weld Mock-Ups: Part 1—Simulation." In ASME 2010 Pressure Vessels and Piping Division/K-PVP Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/pvp2010-26023.

Повний текст джерела
Анотація:
British Energy (BE) has funded a large work programme to assess the possible impact of primary water stress corrosion cracking on dissimilar metal welds in the primary circuit of the Sizewell ‘B’ pressurised water reactor. This effort has included the design and manufacture of representative pressuriser safety/relief valve nozzle welds both with and without a full structural weld overlay, multiple residual stress measurements on both mock-ups using the deep hole and incremental deep hole methods, and a number of finite element weld residual stress simulations of both the mock-ups and equivalent plant welds. Three organisations have performed simulations of the safety/relief valve nozzle configuration: Westinghouse, Engineering Mechanics Corporation of Columbus (EMC2) and the Australian Nuclear Science and Technology Organisation (ANSTO). The simulations employ different welding heat input idealisations, make different assumptions about manufacturing history, and use a variety of different material constitutive models, ranging from simple bilinear kinematic hardening to a full mixed isotropic-kinematic formulation. The availability of both high quality measurements from well characterised mock-ups, and a large matrix of simulations, offers the opportunity for a “mini-round-robin” examining both the accuracy and key solution variables of dissimilar metal weld finite element simulations. This paper is one of a series at this conference that examine various aspects of the BE work programme. It describes the detailed finite element simulation of the mock-ups performed by BE and ANSTO. This makes use of the extensive mock-up manufacturing records to perform a detailed pass-bypass simulation of the entire manufacturing process from initial nozzle buttering through to completion of the safe end to pipe weld. The thermal simulation makes use of a dedicated welding heat source modelling tool to derive Gaussian volumetric heat source parameters from the welding records, and the mechanical simulation employs isotropic, kinematic and mixed isotropic-kinematic material constitutive models. Additional sensitivity studies examine sensitivity to manufacturing history and physical properties such as expansion coefficient mismatch.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kohlenbach, P., S. McEvoy, W. Stein, A. Burton, K. Wong, K. Lovegrove, G. Burgess, W. Joe, and J. Coventry. "Novel Parabolic Trough Collectors Driving a Small-Scale Organic Rankine Cycle System." In ASME 2007 Energy Sustainability Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/es2007-36157.

Повний текст джерела
Анотація:
This paper presents component performance results of a new parabolic trough collector array driving an organic Rankine cycle (ORC) power generation system. The system has been installed in the National Solar Energy Centre at CSIRO Energy Technology in Newcastle, NSW, Australia. It consists of four rows of 18 parabolic mirrors each in a 2×2 matrix with a total aperture area of approximately 132m2. The absorber tube is a laterally aligned, 40mm copper tube coated with a semi-selective paint and enclosed in a 50mm non-evacuated glass tube to reduce convection losses. The mirror modules, which are light-weight and robust, are made from thin low iron back silvered glass bonded to a sheet steel substrate. They are supported by a box truss on semi circular hoops running on rollers for single axis tracking. The mirror design has been chosen to allow low-cost manufacturing as well as simple commissioning and operation. The ORC unit is a FP6 unit sourced from Freepower Ltd. with a net power output of 6kWel at 180°C inlet temperature and a total heat input of 70 kWth. It uses a two-stage expansion process with hydrofluoroether as the working fluid. A wet cooling tower is used to dissipate the reject heat from the ORC. The two key components of the envisioned system are the trough reflector/receiver and the ORC unit. The optical performance of the mirror elements was investigated with regard to the flux mapping onto the receiver tube. The ORC unit has been tested separately using an electrical oil heater as the heat source. This paper presents results for irradiation capture and intensity over the receiver width of a single trough mirror module. The complete system including trough collectors and ORC has not been in transient operation yet, thus experimental steady-state results of the ORC unit are presented.
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Manufacturing processes Australia" для конкретних типів джерел:
Статті в журналах
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії