Дисертації з теми "Magnetotelluric inversion"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-37 дисертацій для дослідження на тему "Magnetotelluric inversion".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Chen, Xiaoming. "Two-dimensional constrained anisotropic inversion of magnetotelluric data." Phd thesis, Universität Potsdam, 2012. http://opus.kobv.de/ubp/volltexte/2012/6316/.
Повний текст джерелаTektonische und geologische Prozesse verursachen häufig eine strukturelle Anisotropie des Untergrundes, welche von verschiedenen geophysikalischen Methoden beobachtet werden kann. Zur Erstellung und Interpretation geeigneter, realistischer Modelle der Erde sind Inversionsalgorithmen notwendig, die einen anisotropen Untergrund einbeziehen können. Für die vorliegende Arbeit habe ich einen magnetotellurischen (MT) Datensatz vom Cape Fold Gürtel in Südafrika untersucht. Diese Daten weisen auf eine ausgeprägte Anisotropie der Kruste hin, da z.B. die MT Phasen außerhalb des erwarteten Quadranten liegen und nicht durch standardisierte isotrope Inversionsalgorithmen angepasst und ausgewertet werden können. Um dieses Problem zu beheben, habe ich eine zweidimensionale Inversionsmethode entwickelt, welche eine anisotrope elektrische Leitfähigkeitsverteilungen in den Modellen zulässt. Die MT Inversion ist im allgemeinen ein nichtlineares, schlecht gestelltes Minimierungsproblem mit einer hohen Anzahl an Freiheitsgraden. Im isotropen Fall wird jeder Gitterzelle eines Modells ein elektrischer Leitfähigkeitswert zugewiesen um den Erduntergrund nachzubilden. Ein Modell mit beispielsweise 100 x 50 Zellen besitzt 5000 unbekannte Modellparameter. Im Gegensatz dazu haben wir im anisotropen Fall die sechsfache Anzahl, da hier aus dem einfachen Zahlenwert der elektrischen Leitfähigkeit ein symmetrischer, reellwertiger Tensor wird, wobei die Anzahl der Daten gleich bleibt. Für die erfolgreiche Inversion von anisotropen Leitfähigkeiten und um die Nicht-Eindeutigkeit der Lösung des inversen Problems zu überwinden, ist eine geeignete Einschränkung der möglichen Modelle absolut notwendig. Dies wird umso wichtiger, da die Sensitivität von MT Daten nicht für alle Anisotropieparameter gleich ist. In der vorliegenden Arbeit habe ich einen Algorithmus entwickelt, welcher die Lösung des anisotropen Inversionsproblems unter Minimierung einer globalen Straffunktion berechnet. Diese besteht aus drei Teilen: der Datenanpassung, den Zusatzbedingungen an die Glätte des Modells und die Anisotropie. Im Gegensatz dazu werden beim isotropen Fall nur die ersten zwei Parameter minimiert. Der neu definierte Anisotropieterm wird mit Hilfe der Summe der quadratischen Abweichung der Hauptleitfähigkeitswerte des Modells gemessen. Die grundlegende Idee dieser Zusatzbedingung ist einfach. Falls ein isotropes Modell die Daten ausreichend gut anpassen kann, wird keine elektrische Anisotropie zusätzlich in das Modell eingefügt. Um eine erfolgreiche Inversion zu garantieren müssen geeignete Regularisierungsparameter für die verschiedenen Nebenbedingungen an das Modell gewählt werden. Tests mit synthetischen Modellen zeigen, dass bei festgesetzten Regularisierungsparametern die Inversion meistens entweder in einem glatten Modell mit hohem RMS Fehler oder einem groben Modell mit kleinem RMS Fehler endet. Die Anwendung einer Relaxationsbedingung auf die Regularisierung nach jedem Iterationsschritt resultiert in glatteren Inversionsmodellen und einer höheren Konvergenz und scheint ein ausgereifter Weg zur Wahl der Parameter zu sein. Die vorgestellte Inversionsmethode ist im allgemeinen in der Lage die Hauptleitfähigkeiten in der horizontalen Ebene zu finden. Wenn keine der Hauptrichtungen der Anisotropiestruktur mit der vorgegebenen Streichrichtung übereinstimmt, können nur die dazugehörigen effektiven Leitfähigkeiten, welche die Projektion der Hauptleitfähigkeiten auf die Koordinatenachsen des Modells darstellen, aufgelöst werden. Allerdings gehen die Informationen über die Rotationswinkel verloren. Am Ende meiner Arbeit werden die MT Daten des Cape Fold Gürtels in Südafrika analysiert. Die MT Daten zeigen in einem Abschnitt des Messprofils (> 10 km) Phasen über 90 Grad. Dieser Teil der Daten kann nicht mit herkömmlichen isotropen Modellierungsverfahren angepasst und daher mit diesen auch nicht vollständig ausgewertet werden. Die vorgestellte Inversionsmethode konnte die außergewöhnlich hohen Phasenwerte nicht wie gewünscht im Inversionsergebnis erreichen, was mit dem erwähnten Informationsverlust der Rotationswinkel begründet werden kann. MT Phasen außerhalb des ersten Quadranten können für gewöhnlich bei Anomalien mit geneigter Streichrichtung der Anisotropie gemessen werden. Um diese auch in den Inversionsergebnissen zu erreichen ist eine Weiterentwicklung des Algorithmus notwendig. Vorwärtsmodellierungen des MT Datensatzes haben allerdings gezeigt, dass eine hohe Leitfähigkeitsheterogenität an der Oberfläche in Kombination mit einer Zone elektrischer Anisotropie in der mittleren Kruste notwendig sind um die Daten anzupassen. Aufgrund geologischer und tektonischer Informationen kann diese Zone in der mittleren Kruste als tiefer Aquifer interpretiert werden, der im Zusammenhang mit den zerrütteten Gesteinen der Table Mountain Group des Cape Fold Gürtels steht.
Le, Van Anh Cuong. "Cooperative Inversion of Magnetotelluric and Seismic Data." Thesis, Curtin University, 2017. http://hdl.handle.net/20.500.11937/59652.
Повний текст джерелаAlvarez, Aramberri Julen. "hp-Adaptive Simulation and Inversion of Magnetotelluric Measurements." Thesis, Pau, 2015. http://www.theses.fr/2015PAUU3056/document.
Повний текст джерелаThe magnetotelluric (MT) method is a passive exploration technique that aims at estimating the resistivity distribution of the Earth's subsurface, and therefore at providing an image of it. This process is divided into two different steps. The first one consists in recording the data. In a second step, recorded measurements are analyzed by employing numerical methods. This dissertation focuses in this second task. We provide a rigorous mathematical setting in the context of the Finite Element Method (FEM) that helps to understand the MT problem and its inversion process. In order to recover a map of the subsurface based on 2D MT measurements, we employ for the first time in Mts a multi-goal oriented self adaptive hp-Finite Element Method (FEM). We accurately solve both the full formulation as well as a secondary field formulation where the primary field is given by the solution of a 1D layered media. To truncate the computational domain, we design a Perfectly Matched Layer (PML) that automatically adapts to high-contrast material properties that appear within the subsurface and on the air-ground interface. For the inversion process, we develop a first step of a Dimensionally Adaptive Method (DAM) by considering the dimension of the problem as a variable in the inversion. Additionally, this dissertation supplies a rigorous numerical analysis for the forward and inverse problems. Regarding the forward modelization, we perform a frequency sensitivity analysis, we study the effect of the source, the convergence of the hp-adaptivity, or the effect of the PML in the computation of the electromagnetic fields and impedance. As far as the inversion is concerned, we study the impact of the selected variable for the inversion process, the different information that each mode provides,and the gains of the DAM approach
Zhang, Ai Jun. "Modelling and inversion of two-dimensional magnetotelluric data." Thesis, University of Edinburgh, 1988. http://hdl.handle.net/1842/14717.
Повний текст джерелаLu, Xinyou. "Inversion of controlled-source audio-frequency magnetotelluric data /." Thesis, Connect to this title online; UW restricted, 1999. http://hdl.handle.net/1773/6799.
Повний текст джерелаWilhelms, Wenke. "Development of a three-dimensional all-at-once inversion approach for the magnetotelluric method." Doctoral thesis, Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2016. http://nbn-resolving.de/urn:nbn:de:bsz:105-qucosa-207548.
Повний текст джерелаUlugergerli, Emin Ugur. "Development and application of 2D magnetotelluric inversion in complex domain." Thesis, University of Leicester, 1998. http://hdl.handle.net/2381/30430.
Повний текст джерелаShan, Chunling. "Natural and Controlled Source Magnetotelluric Data Processing and Modeling." Doctoral thesis, Uppsala universitet, Geofysik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-229917.
Повний текст джерелаYan, Ping. "Inversion of Magnetotelluric Data Constrained by Borehole Logs and Reflection Seismic Sections." Doctoral thesis, Uppsala universitet, Geofysik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-303498.
Повний текст джерелаChen, Xiaoming [Verfasser], and Ute [Akademischer Betreuer] Weckmann. "Two-dimensional constrained anisotropic inversion of magnetotelluric data / Xiaoming Chen. Betreuer: Ute Weckmann." Potsdam : Universitätsbibliothek der Universität Potsdam, 2012. http://d-nb.info/1029243824/34.
Повний текст джерелаZbinden, Dominik. "Inversion of 2D Magnetotelluric and Radiomagnetotelluric data with Non-Linear Conjugate Gradient techniques." Thesis, Uppsala universitet, Geofysik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-256900.
Повний текст джерелаMackie, Randall Lee. "Three-dimensional magnetotelluric modeling and inversion with applications to the California Basin and Range Province." Thesis, Massachusetts Institute of Technology, 1991. http://hdl.handle.net/1721.1/13753.
Повний текст джерелаBjänndal, Erik. "Geophysical investigation of the Arvidsjaur volcanics and the Archean-Proterozoic boundary." Thesis, Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-72632.
Повний текст джерелаI detta arbete så har de magnetiska och magnetotelluriska (MT) geofysiska metoderna används för att skapa två 3D modeller över Laverområdet i södra Norrbotten. I området finns en porfyrkopparfyndighet som Boliden rapporterade in 2012. Målet med båda modellerna är att fördjupa förståelsen för bildningsmiljön för fyndigheten och för att se hur lämpade de geofysiska metoderna är för prospektering. Det första steget var att använda befintliga magnetiska data och processa den med ED funktionen (Beiki, 2010) för att identifiera strukturer och bergartskontakter i området. Den magnetiska data användes för att producera en 3D modell med inversionsprogrammet SimPEG (Cocket, et al., 2015). Denna modell kunde skilja mellan vulkaniska och övriga bergarter i området. Magnetotelluriska data samlades in i september 2018 och modellerades med MOD3DEM (Egbert & Kelbert, 2012), denna modell hade dock problem att finna anomalier i området.
Cherevatova, M. (Maria). "Electrical conductivity structure of the lithosphere in western Fennoscandia from three-dimensional magnetotelluric data." Doctoral thesis, Oulun yliopisto, 2014. http://urn.fi/urn:isbn:9789526207100.
Повний текст джерелаTiivistelmä Olemme tutkineet litosfäärin sähkönjohtavuutta Fennoskandian länsiosassa magnetotelluurisen (MT) menetelmän avulla. Fennoskandian länsireuna muokkautui merkittävästi paleotsooisena aikana Kaledonidien vuorijonopoimutuksessa sekä myöhemmin mesotsooisena aikana Laurentia-mantereen repeytyessä ja Atlantin valtameren syntyessä noin 80 miljoonaa vuotta sitten. MT-tutkimukset tehtiin Etelä-Norjassa ja Fennoskandian luoteisosassa. Ensimmäisessä tutkimuksessa kallioperän sähkönjohtavuutta kuvattiin kaksiulotteisilla (2-D) johtavuusmalleilla, jotka ulottuvat Oslosta Norjan rannikolle. Mallien tulkinta viittaa siihen, että maan kuori on pääosin hyvin eristävä lukuun ottamatta muutamaa kuoren ylä- ja keskiosassa olevaa johdekerrosta. Yläkuoren johteet edustavat alunaliuskeita ja keskikuoren johteet todennäköisesti suljetuissa merialtaissa syntyneitä hiilipitoisia sedimenttikerrostumia. Laajempi MT-tutkimus tehtiin ”Magnetotellurics in the Scandes” -hankkeessa. Mittauksia tehtiin 279 mittauspisteessä kesinä 2011–2013. Saadun aineiston avulla voitiin laatia 2-D inversiomallit kuoresta ja ylävaipasta sekä 3-D inversiomalli kuoresta. Tulosten mukaan täällä kuoren yläosa on eristävä kun taas kuoren alaosa on sähköä hyvin johtava. Edellisen lisäksi malleissa näkyy yläkuoren johtavat muodostumat Skellefteån ja Kittilän alueilla, korkean johtavuuden alunaliuskeet Kaledonidien alueella sekä johde Lofoottien alla. Litosfäärin paksuus on noin 200 km mittausverkon pohjoisosassa ja noin 300 km lounaassa. Tämän mukaan litosfääri on paksuin varhaisproterotsooisen litosfäärin alueella, ei arkeeisen litosfäärin alueella vastoin yleistä hypoteesia. Tutkimuksen teoreettisessa osassa kehitettiin sähkömagneettiseen mallinnukseen uusi monitasoiseen diskretisointiin perustuva menetelmä. MT-aineiston 3-D käänteisongelman ratkaisu ja siihen liittyvä suora mallintaminen vaativat suuren laskennallisen kapasiteetin, koska havaintojen ja mallin kuvaamiseen tarvittavien parametrien määrä on erittäin suuri. Moniresoluutio-algoritmi perustuu siihen, että mallin hienojakoisempaa diskretisointia tarvitaan yleensä lähellä maan pintaa kun taas syvemmälle edettäessä, sähkömagneettisen aallon diffuusin etenemisen vuoksi, malli voi olla karkeampi. Tietokonesimulaatioiden mukaan suoritusaika on viidennes ja muistitarve kolmannes verrattuna tavanomaiseen suoran laskennan ”staggered grid” -diskretisointiin
Mohammadi, Soroor. "Processing and Modeling of Gravity, Magnetic and Electromagnetic Data in the Falkenberg Area, Sweden." Thesis, Uppsala universitet, Geofysik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-232714.
Повний текст джерелаPlasman, Matthieu. "Rupture lithosphérique continentale dans le rift Africain : apport de l'inversion conjointe." Thesis, Brest, 2017. http://www.theses.fr/2017BRES0029/document.
Повний текст джерелаGeophysical joint inversion attempts to reproduce as best as possible the interior of the Earth. By integrating several geophysical techniques the joint inversion reduces the uncertainties of each methods and improves our understanding of the Earth structure. In this study we use the receiver functions (RF), the magnetotelluric (MT) and the gravity methods which enable to charaterize the Swave velocity, the electrical resistivity and the density, respectively. The objective of this research work is divided in two parts; first with the development of a new 3D joint inversion approach and then with the application of these methods (on a joint or separate approach) on the North Tanzanian Divergence to better understand the continental breakup.For the methodologic part two approaches have been developed; one between the MT and gravity data with an original computation of the topographic effect which decreases the number of cells while keeping a satisfaying resolution. And a second method between the MT and RF data where pseudo 3D velocity model are created and combined with the MT models to better takes into account the physical properties of the receiver function. The application of these methods on the Tanzania highlighted several lithospheric structures and particularly two low-velocity areas in the lower crust and the upper mantle. This latter suggests interactions with Proterozoic inherited structures and the African plume material
Wittke, Jan [Verfasser], Bülent [Gutachter] Tezkan, Klaus [Gutachter] Spitzer, and Becken [Gutachter] Michael. "Meshless methods for Maxwell’s equations with applications to magnetotelluric modelling and inversion / Jan Wittke ; Gutachter: Bülent Tezkan, Klaus Spitzer, Becken Michael." Köln : Universitäts- und Stadtbibliothek Köln, 2017. http://d-nb.info/1148623698/34.
Повний текст джерелаMeqbel, Naser Mohammad Meqbel [Verfasser]. "The electrical conductivity structure of the Dead Sea Basin derived from 2D and 3D inversion of magnetotelluric data / Naser Mohammad Meqbel Meqbel." Berlin : Freie Universität Berlin, 2009. http://d-nb.info/1023785021/34.
Повний текст джерелаArs, Jean-Michel. "Inversion conjointe géophysique appliquée à l'exploration en géothermie profonde dans le Massif Central." Thesis, Brest, 2018. http://www.theses.fr/2018BRES0025.
Повний текст джерелаThe development of geothermal energy has led to the exploitation of resources established in varied geological and geodynamic contexts. Geophysical exploration of these complex reservoirs requires the use of several complementary imaging methods. This PhD thesis focuses on the exploration of a geothermal resource located within the fractured basement in the French Massif Central using magnetotelluric, ambient noise tomography and gravimetry. Magnetotelluric is a 3D imaging method with a good resolution power that is sensitive to the presence of water and hydrothermal weathering clays but is limited by its spatial coverage. Seismic noise tomography has a good vertical resolution but does not resolve well horizontal velocity variations. This method is sensitive to variations of the mechanical properties of rocks and thus to fractured media. Finally gravimetry brings constraint on the lithological variations and has a good lateral resolution but lacks vertical resolution.We present a method of joint inversion of seismic and gravimetric data under the constraint of a resistivity model obtained by independent magnetotelluric inversion. Joint inversion requires defining model couplings. By lack of prior knowledge of petrophysical relationships, we have coupled the density, resistivity and velocity models with a law that constraints the parameters to be correlated on average.This strategy aims to bring out the characteristic relationships of the geological objects of the geothermal resource. This joint inversion methodology has been tested on synthetic models. The application to the real data acquired in the Massif Central has made it possible to define a deep zone of high correlation interpreted as the fragile ductile transition. The intermediate part of the models, more homogeneous, allows to distinguish different geological units separated by a fault zone. Finally the superficial part is distinguished by strong heterogeneity of the parameters resulting probably from surface alteration process
Ismail, Nazli. "Controlled Source Radiomagnetotelluric (CSRMT) Applications in Environmental and Resource Exploration." Doctoral thesis, Uppsala universitet, Geofysik, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-102750.
Повний текст джерелаGaliana, Blanch Savitri. "Two-dimensional modeling and inversion of the controlled-source electromagnetic and magnetotelluric methods using finite elements and full-space PDE-constrained optimization strategies." Doctoral thesis, Universitat de Barcelona, 2016. http://hdl.handle.net/10803/400616.
Повний текст джерела[cat] El mètode de font electromagnètica controlada (CSEM) i el mètode magnetotel.lúric (MT) són tècniques geofísiques usades habitualment per obtenir una imatge de les propietats elèctriques del subsòl terrestre i s'utilitzen independentment, conjuntament i en combinació amb altres tècniques geofísiques. Per poder interpretar les dades, ambdós mètodes necessiten la modelització directa i inversa de la conductivitat elèctrica del subsòl amb l'objectiu final d'obtenir un model coherent per al qual les dades simulades s'ajustin de forma raonable a les observacions. Naturalment, la qualitat d'aquest ajust no només depèn de l'error en les dades mesurades i de l'error numèric, sinó també del grau en l'aproximació física inferit per la modelització numèrica. D'aquesta manera, les recerques actuals se centren a investigar noves metodologies per a la modelització i inversió, per tal d'obtenir models acurats i fiables de les estructures de la Terra en escenaris cada cop més complexos. Un primer pas és millorar les aproximacions en la modelització tenint en compte factors físics com ara l'anisotropia, la topografia o fonts més realistes. En segon lloc, per tal d'acomodar aquests factors en un programa de modelització i inversió i per poder tractar els conjunts de dades típicament llargs, els mètodes numèrics han de ser avaluats en termes de la precisió de la solució, l'eficiència en temps i la demanda en memòria. Els mètodes de modelització en elements finits (FE) són coneguts per oferir una major flexibilitat en la modelització de la geometria i contenen mecanismes de control de la solució, com ara l'ordre de les funcions forma i la tècnica de refinament adaptatiu de la malla. La majoria de programes de modelització emergents estan basats en els FE, i mostren avantatges significatius, però gairebé tots els programes de modelització inversa, encara avui dia, estan basats en el mètode de les diferències finites (FD) o en el mètode de l'equació integral (IE). A més a més, la modelització inversa desenvolupada per a dades electromagnètiques (EM) es basa generalment en mètodes del gradient i es formula en un espai reduït, on les úniques variables d'optimització són els paràmetres del model, és a dir, la conductivitat elèctrica del subsòl. Originalment, el problema invers es formula per als camps EM i per al paràmetre conductivitat, i està constret per les equacions diferencials en derivades parcials (PDEs) que governen les variables camps EM. L'estratègia d'espai reduït elimina les variables camps aplicant lligams d'igualtat i soluciona, doncs, el problema no constret en l'espai reduït dels paràmetres del model. Un desavantatge general d'aquests mètodes és la costosa repetició del càlcul de la solució del problema directe i de la matriu jacobiana de sensibilitats (per mètodes basats en Newton). D'altra banda, també és possible de solucionar el problema invers en l'espai complet de les variables camps EM i del paràmetre conductivitat. Solucionar-hi el problema d'optimització constret per les PDEs té l'avantatge que només és necessari de solucionar exactament el problema directe al final del procés d'optimització, però això comporta el cost addicional de tenir moltes més variables d'optimització i de la presència de lligams d'igualtat. També, en particular, en el marc dels FE, el problema d'optimització constret per les PDEs té l'avantatge afegit d'incloure tècniques sofisticades pròpies dels FE en el procés d'inversió, com ara el refinament adaptatiu de la malla. Aquesta tesi desenvolupa un programa robust i versàtil amb FE i malles irregulars adaptatives per modelar numèricament el camp total de dades CSEM i MT bidimensionals (2D) i anisòtropes, que permet l'ús de fonts tridimensionals (3D) orientades arbitràriament. Per tal de representar fonts CSEM 3D en un model físic 2D, s'utilitza una aproximació dos i mig dimensional (2.5D). Les formulacions FE es deriven per a ambdós mètodes, per a estructures de conductivitat del subsòl isòtropes i anisòtropes. Encara que el cas anisòtrop no és general, inclou anisotropia vertical i de cabussament. La precisió en la solució es controla i millora amb un algoritme de refinament adaptatiu de la malla utilitzant mètodes d'estimació de l'error a posteriori. Una sèrie exhaustiva d'experiments numèrics valida el programa de FE adaptatius per ambdós mètodes, CSEM i MT, i en escenaris terrestres i marins. S'estudia la influència de les dimensions del model, del disseny de la malla i de l'ordre de les funcions forma en l'exactitud de la solució i es troba un comportament notablement superior de les funcions forma quadràtiques comparades amb les lineals o cúbiques. Diferents exemples mostren l'efecte d'escenaris complexos sobre les dades EM, en particular, un model amb batimetria, un model terrestre i un de marí amb fonts orientades i de dimensió finita, un medi amb anisotropia vertical amb un reservori encastat i un altre amb un reservori encastat en una estructura anticlinal. Aquests exemples demostren la importància de considerar adequadament (en termes de modelització directa) característiques físiques com la topografia, l'orientació i geometria de la font i l'anisotropia del medi, que sovint es troben en mesures reals. Juntament amb això, es deriva una formulació per al problema invers 2.5D CSEM com una optimització constreta per les PDEs en l'espai complet i en un marc de FE, seguint dues estratègies diferents: discretització-optimització i optimització-discretització. L'estratègia de discretització-optimització considera que el problema invers es troba en forma discretitzada i deriva les condicions d'optimitat de la Lagrangiana i el pas de Newton. Contràriament, l'aproximació optimització-discretització deriva primer les condicions d'optimitat i el pas de Newton o una aproximació d'aquest, i després discretitza les equacions resultants. La implementació de la formulació discretització-optimització es mostra en dos exemples, un model canònic de reservori i un model marí més realista amb topografia, utilitzant un programa d'optimització de propòsit general, que és una implementació d'un algoritme de programació quadràtica seqüencial (SQP). Encara que no s'utilitza una regularització explícita, l'ús de diferents malles per al paràmetre del model i per a les variables camps, permet recuperar les principals estructures del model i obtenir un ajust de les dades acceptable. Cal dir, però, que l'eficiència en temps i memòria del programa hauria de millorar-se. Finalment, el problema invers 2.5D CSEM es formula com un problema d'optimització constret per les PDEs en l'espai complet i en un marc de FE utilitzant una estratègia d'optimització-discretització i com un primer pas per al desenvolupament d'un esquema d'inversió que utilitzi malles adaptatives de FE.
Tietze, Kristina [Verfasser]. "Investigating the electrical conductivity structure of the San Andreas fault system in the Parkfield-Cholame region, central California, with 3D magnetotelluric inversion / Kristina Tietze." Berlin : Freie Universität Berlin, 2012. http://d-nb.info/1030383065/34.
Повний текст джерелаVadoodi, Roshanak. "Geophysical vectoring of mineralized systems in northern Norrbotten." Licentiate thesis, Luleå tekniska universitet, Geovetenskap och miljöteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-82408.
Повний текст джерелаWilhelms, Wenke [Verfasser], Klaus [Akademischer Betreuer] Spitzer, Klaus [Gutachter] Spitzer, Michael [Gutachter] Eiermann, and Dmitry [Gutachter] Avdeev. "Development of a three-dimensional all-at-once inversion approach for the magnetotelluric method / Wenke Wilhelms ; Gutachter: Klaus Spitzer, Michael Eiermann, Dmitry Avdeev ; Betreuer: Klaus Spitzer." Freiberg : Technische Universitaet Bergakademie Freiberg Universitaetsbibliothek "Georgius Agricola", 2016. http://d-nb.info/1220912778/34.
Повний текст джерелаHering, Philip [Verfasser], Andreas [Akademischer Betreuer] Junge, Colin [Akademischer Betreuer] Brown, Andreas [Gutachter] Junge, and Colin [Gutachter] Brown. "Advances in magnetotelluric data processing, interpretation and inversion, illustrated by a three-dimensional resistivity model of the Ceboruco volcano / Philip Hering ; Gutachter: Andreas Junge, Colin Brown ; Andreas Junge, Colin Brown." Frankfurt am Main : Universitätsbibliothek Johann Christian Senckenberg, 2019. http://d-nb.info/1226180604/34.
Повний текст джерелаDosso, Stanley Edward. "Inversion and appraisal for the one-dimensional magnetotellurics problem." Thesis, University of British Columbia, 1990. http://hdl.handle.net/2429/30692.
Повний текст джерелаScience, Faculty of
Earth, Ocean and Atmospheric Sciences, Department of
Graduate
García, Juanatey María de los Ángeles. "Seismics, 2D and 3D Inversion of Magnetotellurics : Jigsaw pieces in understanding the Skellefte Ore District." Doctoral thesis, Uppsala universitet, Geofysik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-178060.
Повний текст джерелаSkellefteåfälten är ett av de viktigaste malmdistrikten i Sverige. Malmkropparna består av vulkaniskvärda Massiva Sulfider (VHMS) rika på Zink, Koppar, Bly, Guld och Silver, och har utforskats och brutits i mer än ett sekel. Med tanke på att de senaste tekniska framstegen tillåter djupare brytning, och att nya upptäckter är ovanliga idag, riktas nya ansträngningar mot att lokalisera malm på större djup. Aktuella prospekteringsstrategier måste därför anpassas, och en bättre förståelse av regionala strukturer är nödvändig. För att lösa dessa frågor lanserades projektet VINNOVA 4D modeling of the Skellefte District. Dess främsta syfte är att utreda de regionala strukturerna och det tektoniska läget av Skelleftefältet. För att uppnå detta, har nya geologiska och geofysiska data insamlats vid två viktiga platser i distriktet. Denna avhandling presenterar bidrag från inversionsmodellering i 2D och 3D av magnetotelluriska (MT) data samt resultaten av en reflektionsseismisk profil. De viktigaste resultaten är: bra ledande hydrotermiskt förändrade zoner inom de annars resistiva bergarterna i Skellefte-gruppen, djupet till tidiga och postorogeniska intrusioner, framstående skjuvzoner i den centrala delen av området, och ökad reflektionsförmåga och konduktivitet vid basen av Skellefte-gruppen i hela fältet. Även om tillämpningen av dessa metoder utmanas av fältens komplexa geologiska läge, visas det efter en noggrann bearbetning och analys av data att de ger en robust bild av den lite djupare berggrunden. Dessutom har kombinationen av reflektionsseismik och MT visat sig vara ett kraftfullt verktyg för hypotesprövning och för att utveckla den allmänna förståelsen av Skelleftefältet och dess historia. Därutöver presenteras två 3D inversionsmodeller av MT data och jämförs sedan med resultaten från 2D determinantinversioner. 3D tekniker visar betydande förbättringar av datapassform och begränsar observerade anomalier bättre. Även om 3D inversion av MT data ännu inte är en vanlig teknik och frågor som modellbedömning och galvaniska distorsionseffekter måste behandlas ytterligare, är resultat från komplexa miljöer med lagom yttäckning redan överlägsna.
VINNOVA 4D modeling of the Skellefte District
Linde, Niklas. "Characterization of Hydrogeological Media Using Electromagnetic Geophysics." Doctoral thesis, Uppsala universitet, Geofysik, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-5912.
Повний текст джерелаConway, Dennis. "Advances in Magnetotelluric Modelling: Time-Lapse Inversion, Bayesian Inversion and Machine Learning." Thesis, 2018. http://hdl.handle.net/2440/120299.
Повний текст джерелаThesis (Ph.D.) -- University of Adelaide, School of Physical Sciences, 2018
Markovic, Milenko. "Joint inversion of magnetotelluric and seismic data for crustal characterization." Doctoral thesis, 2014. http://hdl.handle.net/10451/10955.
Повний текст джерелаThe research that has been performed in this thesis contributes to integration two different geophysical methods (magnetotellurics and seismic refraction). Pattern recognition has not been used for the cooperative inversion of these two methods before. This study demonstrates potential of soft clustering methods for integration of two data sets. Gathering information from both inversions, a multiparameter model was made. This multi-parameter model contains regions, each of which is characterized by a consistent relationship between the model parameters. Both synthetic and field data results were used to discuss an assumption that mutual exchange of information can lead to better results of inversions in both cases. The method developed in this thesis was successfully applied at experimental data collected in the Iberian Pyrite Belt.
A investigação desenvolvida nesta tese é uma contribuição para a integração de dois métodos geofísicos (magneto-telúrico e sísmica de refracção). A técnica de reconhecimento de padrões não tinha sido ainda utilizada na inversão cooperativa de dados destes dois métodos. Este estudo mostra as potencialidades dos métodos de análise de “clusters” na integração dos dois conjuntos de dados.Um modelo “multi-parâmetros” foi desenvolvido para extrair informação de ambos os métodos geofísicos.Este modelo contém regiões caracterizadas por relações consistentes entre os parâmetros. Resultados obtidos com dados sintéticos e de campo foram usados para mostrar que o uso da informação contida nos dois conjuntos de dados conduz a melhores resultados. O método desenvolvido nesta tese foi aplicado, com resultados satisfatórios, a um conjunto de dados reais obtidos na Faixa Piritosa.
Fundação para a Ciência e Tecnologia (FCT, SFRH/BD/66455/2009)
Thiel, Stephan. "Modelling and inversion of magnetotelluric data for 2-D and 3-D lithospheric structure, with application to obducted and subducted terranes." 2008. http://hdl.handle.net/2440/48492.
Повний текст джерелаThesis (Ph.D.) -- University of Adelaide, School of Earth and Environmental Sciences, 2008
Siripunvaraporn, Weerachai. "An efficient data-subspace two-dimensional magnetotelluric inversion and its application to high resolution profile across the San Andreas Faults at Parkfield, California." Thesis, 1999. http://hdl.handle.net/1957/29703.
Повний текст джерелаSimpson, Janelle Maree. "Understanding interpretation limitations due to MT inversion variability: examples from the Mount Isa Province, Queensland, Australia." Thesis, 2019. http://hdl.handle.net/2440/122614.
Повний текст джерелаThesis (Ph.D.) -- University of Adelaide, School of Physical Sciences, 2019
Persichetti, Joseph A. "Interpretation of 3-D controlled source audio magnetotelluric data collected at the Hanford Nuclear Reservation using 2-D inversion algorithms." 2002. http://catalog.hathitrust.org/api/volumes/oclc/50484606.html.
Повний текст джерелаTypescript. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 122-125).
Blatter, Daniel. "Constraining fluid properties in the mantle and crust using Bayesian inversion of electromagnetic data." Thesis, 2020. https://doi.org/10.7916/d8-b6nw-b545.
Повний текст джерелаSchnaidt, Sebastian. "Improving uncertainty estimation in geophysical inversion modelling." Thesis, 2015. http://hdl.handle.net/2440/111402.
Повний текст джерелаThesis (Ph.D.) (Research by Publication) -- University of Adelaide, School of Physical Sciences, 2015.
Soeffky, P. "Delineating the deep crustal fluid link between the Paralana Enhanced Geothermal System and the Beverley Uranium Mine using magnetotellurics." Thesis, 2012. http://hdl.handle.net/2440/95486.
Повний текст джерелаThe global demand for clean energy alternatives is constantly increasing, creating significant interest for more sustainable energy resources such as uranium and geothermal. Australia is host to over 25% of the world's known uranium resources as well as having significant geothermal potential. The Mount Painter Domain, in the Northern Flinders Ranges in South Australia, is in a region of anomalously high heat flow generated by radiogenic decay of uranium and thorium rich granites. Two distinct uranium deposits have formed from dissolved uranium carried from the ranges by fluids, being deposited where reduction in sediment pH precipitates uranium. In May 2012 a magnetotelluric profile was collected, extending from the Northern Flinders Ranges to the Lake Frome embayment to help constrain existing resistivity models. Precipitation of uranium at the Beverley Mine site is anomalous as no surface water flow is present, suggesting the presence of subsurface processes. This pathway is linked to a 50m conductive body at the brittle-ductile boundary of the mid-crust, directly under the Paralana geothermal prospect. 3D modelling of the Paralana geothermal prospect suggests deep conductive features connecting with features at the surface.
Thesis (B.Sc.(Hons)) -- University of Adelaide, School of Earth and Environmental Sciences, 2012