Статті в журналах з теми "Magnetic field- Electrical discharge machining"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Magnetic field- Electrical discharge machining".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Walkar, Hemant, Vijaykumar S. Jatti, and T. P. Singh. "Magnetic Field Assisted Electrical Discharge Machining of AISI 4140." Applied Mechanics and Materials 592-594 (July 2014): 479–83. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.479.
Повний текст джерелаZhang, Zhen, Yi Zhang, Wuyi Ming, Yanming Zhang, Chen Cao, and Guojun Zhang. "A review on magnetic field assisted electrical discharge machining." Journal of Manufacturing Processes 64 (April 2021): 694–722. http://dx.doi.org/10.1016/j.jmapro.2021.01.054.
Повний текст джерелаCheng, Chih-Ping, Kun-Ling Wu, Chao-Chuang Mai, Yu-Shan Hsu, and Biing-Hwa Yan. "Magnetic field-assisted electrochemical discharge machining." Journal of Micromechanics and Microengineering 20, no. 7 (June 7, 2010): 075019. http://dx.doi.org/10.1088/0960-1317/20/7/075019.
Повний текст джерелаRouniyar, Arun Kumar, and Pragya Shandilya. "Fabrication and experimental investigation of magnetic field assisted powder mixed electrical discharge machining on machining of aluminum 6061 alloy." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, no. 12 (March 26, 2019): 2283–91. http://dx.doi.org/10.1177/0954405419838954.
Повний текст джерелаYu, Po Huai, Jung Chou Hung, Hsin Min Lee, Kun Ling Wu, and Biing Hwa Yan. "Machining Characteristics of Magnetic Force-Assisted Electrolytic Machining for Polycrystalline Silicon." Advanced Materials Research 325 (August 2011): 523–29. http://dx.doi.org/10.4028/www.scientific.net/amr.325.523.
Повний текст джерелаYeo, S. H., M. Murali, and H. T. Cheah. "Magnetic field assisted micro electro-discharge machining." Journal of Micromechanics and Microengineering 14, no. 11 (August 11, 2004): 1526–29. http://dx.doi.org/10.1088/0960-1317/14/11/013.
Повний текст джерелаJadhav, Rahul R., Vijaykumar S. Jatti, and T. P. Singh. "Magnetic Field Assisted Electric Discharge Machining of Cryo-Treated Monel 400 Alloy." Applied Mechanics and Materials 787 (August 2015): 371–75. http://dx.doi.org/10.4028/www.scientific.net/amm.787.371.
Повний текст джерелаTakezawa, Hideki, Nobuhiro Yokote, and Naotake Mohri. "External Magnetic Field Control during EDM of a Permanent Magnet." Advanced Materials Research 1017 (September 2014): 806–11. http://dx.doi.org/10.4028/www.scientific.net/amr.1017.806.
Повний текст джерелаAblyaz, Timur Rizovich, Preetkanwal Singh Bains, Sarabjeet Singh Sidhu, Karim Ravilevich Muratov, and Evgeny Sergeevich Shlykov. "Impact of Magnetic Field Environment on the EDM Performance of Al-SiC Metal Matrix Composite." Micromachines 12, no. 5 (April 21, 2021): 469. http://dx.doi.org/10.3390/mi12050469.
Повний текст джерелаTeimouri, Reza, and Hamid Baseri. "Study of Tool Wear and Overcut in EDM Process with Rotary Tool and Magnetic Field." Advances in Tribology 2012 (2012): 1–8. http://dx.doi.org/10.1155/2012/895918.
Повний текст джерелаGupta, Abhishek, and Suhas S. Joshi. "Modelling effect of magnetic field on material removal in dry electrical discharge machining." Plasma Science and Technology 19, no. 2 (January 19, 2017): 025505. http://dx.doi.org/10.1088/2058-6272/19/2/025505.
Повний текст джерелаBeravala, Hardik, and Pulak M. Pandey. "Modelling of material removal rate in the magnetic field and air-assisted electrical discharge machining." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 234, no. 7 (December 3, 2019): 1286–97. http://dx.doi.org/10.1177/0954406219892297.
Повний текст джерелаChinke, Sandeep, Vijaykumar S. Jatti, and T. P. Singh. "Electric Discharge Machining of Cryo-Treated BeCu Alloys." Applied Mechanics and Materials 787 (August 2015): 386–90. http://dx.doi.org/10.4028/www.scientific.net/amm.787.386.
Повний текст джерелаKamide, Yukichi. "Electro discharge machining by steel tool electrode in a magnetic field." IEEJ Transactions on Industry Applications 109, no. 12 (1989): 889–96. http://dx.doi.org/10.1541/ieejias.109.889.
Повний текст джерелаKovbasyuk, A. A., and M. Yu Sarilov. "IMPROVING THE EFFICIENCY OF ELECTRICAL DISCHARGE MACHINING DUE TO IMPOSITION OF EXTERNAL MAGNETIC FIELD." Scholarly Notes of Komsomolsk-na-Amure State Technical University 1, no. 11 (September 30, 2012): 62–65. http://dx.doi.org/10.17084/2012.iii-1(11).10.
Повний текст джерелаGholipoor, Ahad, Hamid Baseri, Mohsen Shakeri, and Mohammadreza Shabgard. "Investigation of the effects of magnetic field on near-dry electrical discharge machining performance." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 230, no. 4 (December 16, 2014): 744–51. http://dx.doi.org/10.1177/0954405414558737.
Повний текст джерелаShabgard, Mohammad Reza, Ahad Gholipoor, and Mousa Mohammadpourfard. "Investigating the effects of external magnetic field on machining characteristics of electrical discharge machining process, numerically and experimentally." International Journal of Advanced Manufacturing Technology 102, no. 1-4 (December 19, 2018): 55–65. http://dx.doi.org/10.1007/s00170-018-3167-3.
Повний текст джерелаKumar, Anish, and Renu Sharma. "Multi-response optimization of magnetic field assisted EDM through desirability function using response surface methodology." Journal of the Mechanical Behavior of Materials 29, no. 1 (April 13, 2020): 19–35. http://dx.doi.org/10.1515/jmbm-2020-0003.
Повний текст джерелаChen, Zhi, and Guojun Zhang. "Study on magnetic field distribution and electro-magnetic deformation in wire electrical discharge machining sharp corner workpiece." International Journal of Advanced Manufacturing Technology 98, no. 5-8 (June 27, 2018): 1913–23. http://dx.doi.org/10.1007/s00170-018-2260-y.
Повний текст джерелаFeng, C. C., L. Li, C. S. Zhang, G. M. Zheng, X. Bai, and Z. W. Niu. "Surface Characteristics and Hydrophobicity of Ni-Ti Alloy through Magnetic Mixed Electrical Discharge Machining." Materials 12, no. 3 (January 26, 2019): 388. http://dx.doi.org/10.3390/ma12030388.
Повний текст джерелаOk, Jong Girl, Bo Hyun Kim, Do Kwan Chung, Woo Yong Sung, Seung Min Lee, Se Won Lee, Wal Jun Kim, Jin Woo Park, Chong Nam Chu, and Yong Hyup Kim. "Electrical discharge machining of carbon nanomaterials in air: machining characteristics and the advanced field emission applications." Journal of Micromechanics and Microengineering 18, no. 2 (December 21, 2007): 025007. http://dx.doi.org/10.1088/0960-1317/18/2/025007.
Повний текст джерелаChattopadhyay, K. D., P. S. Satsangi, S. Verma, and P. C. Sharma. "Analysis of rotary electrical discharge machining characteristics in reversal magnetic field for copper-en8 steel system." International Journal of Advanced Manufacturing Technology 38, no. 9-10 (August 14, 2007): 925–37. http://dx.doi.org/10.1007/s00170-007-1149-y.
Повний текст джерелаZabihi, Seyed Sina, Shahram Etemadi Haghighi, Hamid Soleimanimehr, and Adel Maghsoudpour. "Effects of auxiliary magnetic field strength and direction on material removal rate and surface roughness in magnetic field-assisted electrical discharge machining." CIRP Journal of Manufacturing Science and Technology 41 (April 2023): 446–52. http://dx.doi.org/10.1016/j.cirpj.2023.01.008.
Повний текст джерелаSavita V. Jatti et al.,, Savita V. Jatti et al ,. "A Machinability Evaluation of Cryogenically Treated Beryllium Copper in a Magnetic Field Assisted by Electrical Discharge Machining." International Journal of Mechanical and Production Engineering Research and Development 8, no. 5 (2018): 77–84. http://dx.doi.org/10.24247/ijmperdoct201810.
Повний текст джерелаMing, Wuyi, Zhen Zhang, Shengyong Wang, Yanming Zhang, Fan Shen, and Guojun Zhang. "Comparative study of energy efficiency and environmental impact in magnetic field assisted and conventional electrical discharge machining." Journal of Cleaner Production 214 (March 2019): 12–28. http://dx.doi.org/10.1016/j.jclepro.2018.12.231.
Повний текст джерелаRouniyar, Arun Kumar, and Pragya Shandilya. "Experimental Study on Material Removal Rate of Al6061 Machined with Magnetic Field Assisted Powder Mixed Electrical Discharge Machining." Journal of Physics: Conference Series 1240 (July 2019): 012018. http://dx.doi.org/10.1088/1742-6596/1240/1/012018.
Повний текст джерелаPark, Juhyeon, Hoyong Lee, Gyejo Jung, and Jinyi Lee. "Nondestructive testing of turbine disk roots using solid-state GMR sensor arrays and an axial directional scanning system." International Journal of Applied Electromagnetics and Mechanics 64, no. 1-4 (December 10, 2020): 525–31. http://dx.doi.org/10.3233/jae-209360.
Повний текст джерелаBeravala, Hardik, and Pulak M. Pandey. "Characterization of Debris Formed in Magnetic Field-Assisted EDM Using Two-Phase Dielectric Fluid." Journal of Advanced Manufacturing Systems 19, no. 04 (December 2020): 629–40. http://dx.doi.org/10.1142/s0219686720500353.
Повний текст джерелаUpadhyay, Lokesh, M. L. Aggarwal, and Pulak M. Pandey. "Experimental investigations into rotary magnetic field and tool assisted electric discharge machining using magneto rheological fluid as dielectric." International Journal of Mechatronics and Manufacturing Systems 12, no. 1 (2019): 1. http://dx.doi.org/10.1504/ijmms.2019.097842.
Повний текст джерелаUpadhyay, Lokesh, M. L. Aggarwal, and Pulak M. Pandey. "Experimental investigations into rotary magnetic field and tool assisted electric discharge machining using magneto rheological fluid as dielectric." International Journal of Mechatronics and Manufacturing Systems 12, no. 1 (2019): 1. http://dx.doi.org/10.1504/ijmms.2019.10019107.
Повний текст джерелаLuan, Boran, Xiaoyou Zhang, Fangchao Xu, Guang Yang, Junjie Jin, Chengcheng Xu, Feng Sun, and Koichi Oka. "High Precision Magnetic Levitation Actuator for Micro-EDM." Actuators 11, no. 12 (December 2, 2022): 361. http://dx.doi.org/10.3390/act11120361.
Повний текст джерелаRouniyar, Arun Kumar, and Pragya Shandilya. "Experimental Investigation on Recast Layer and Surface Roughness on Aluminum 6061 Alloy During Magnetic Field Assisted Powder Mixed Electrical Discharge Machining." Journal of Materials Engineering and Performance 29, no. 12 (November 6, 2020): 7981–92. http://dx.doi.org/10.1007/s11665-020-05244-4.
Повний текст джерелаHourdequin, Hélène, Lionel Laudebat, Marie-Laure Locatelli, Zarel Valdez-Nava, and Pierre Bidan. "Metallized ceramic substrate with mesa structure for voltage ramp-up of power modules." European Physical Journal Applied Physics 87, no. 2 (August 2019): 20903. http://dx.doi.org/10.1051/epjap/2019180288.
Повний текст джерелаChaudhari, Rakesh, Jay J. Vora, Vivek Patel, L. N. López de Lacalle, and D. M. Parikh. "Effect of WEDM Process Parameters on Surface Morphology of Nitinol Shape Memory Alloy." Materials 13, no. 21 (November 3, 2020): 4943. http://dx.doi.org/10.3390/ma13214943.
Повний текст джерелаSingh, Rahul Kumar, Mayank Tiwari, Anpeksh Ambreesh Saksena, and Aman Srivastava. "Analysis of a Compact Squeeze Film Damper with Magneto Rheological Fluid." Defence Science Journal 70, no. 2 (March 9, 2020): 122–30. http://dx.doi.org/10.14429/dsj.70.12788.
Повний текст джерелаTuschl, Christoph, Beate Oswald-Tranta, and Sven Eck. "Inductive Thermography as Non-Destructive Testing for Railway Rails." Applied Sciences 11, no. 3 (January 22, 2021): 1003. http://dx.doi.org/10.3390/app11031003.
Повний текст джерелаZhao, Chenhao, Ningsong Qu, and Xiaochuan Tang. "Confined Electrochemical Finishing of Additive-Manufactured Internal Holes with Coaxial Electrolyte Flushing." Journal of The Electrochemical Society 168, no. 11 (November 1, 2021): 113504. http://dx.doi.org/10.1149/1945-7111/ac3782.
Повний текст джерелаYaou, Zhang, Han Ning, Kang Xiaoming, Zhao Wansheng, and Xu Kaixian. "Experimental study of an electrostatic field–induced electrolyte jet electrical discharge machining process." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231, no. 10 (October 24, 2015): 1752–59. http://dx.doi.org/10.1177/0954405415612327.
Повний текст джерелаTakezawa, Hideki, Yoshihiro Ichimura, Tatsuya Suzuki, Tamao Muramatsu, and Naotake Mohri. "Relationship between Thermal Influence and Magnetic Characteristics in Electrical Discharge Machining of Magnetic Materials." Key Engineering Materials 516 (June 2012): 575–79. http://dx.doi.org/10.4028/www.scientific.net/kem.516.575.
Повний текст джерелаZhang, Xiao You, Akio Kifuji, and Dong Jue He. "A Magnetic Drive Actuator for Micro Electrical Discharge Machining." Advanced Materials Research 591-593 (November 2012): 303–6. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.303.
Повний текст джерелаFarkas, Balázs Zsolt, and Márton Takács. "3D Milling by Micro Electrical Discharge Machining." Materials Science Forum 659 (September 2010): 467–70. http://dx.doi.org/10.4028/www.scientific.net/msf.659.467.
Повний текст джерелаSchneider, Sebastian, Tim Herrig, Andreas Klink, and Thomas Bergs. "Modeling of the temperature field induced during electrical discharge machining." CIRP Journal of Manufacturing Science and Technology 38 (August 2022): 650–59. http://dx.doi.org/10.1016/j.cirpj.2022.05.012.
Повний текст джерелаKim, B. H., J. G. Ok, Y. H. Kim, and C. N. Chu. "Electrical Discharge Machining of Carbon Nanofiber for Uniform Field Emission." CIRP Annals 56, no. 1 (2007): 233–36. http://dx.doi.org/10.1016/j.cirp.2007.05.055.
Повний текст джерелаCao, Ming Rang, Yan Qing Wang, Sheng Qiang Yang, and Weng Hui Li. "Experimental and Mechanism Research on EDM Combined with Magnetic Field." Key Engineering Materials 416 (September 2009): 337–41. http://dx.doi.org/10.4028/www.scientific.net/kem.416.337.
Повний текст джерелаBhatt, Geeta, Ajay Batish, and Anirban Bhattacharya. "Experimental Investigation of Magnetic Field Assisted Powder Mixed Electric Discharge Machining." Particulate Science and Technology 33, no. 3 (September 29, 2014): 246–56. http://dx.doi.org/10.1080/02726351.2014.968303.
Повний текст джерелаXIE, B. C., J. G. LIU, and H. X. CUI. "INVESTIGATION OF DEBRIS PARTICLES DISTRIBUTION IN ELECTRICAL DISCHARGE MACHINING OF MICRO-HOLES ARRAY." Digest Journal of Nanomaterials and Biostructures 15, no. 1 (January 2020): 15–23. http://dx.doi.org/10.15251/djnb.2020.151.15.
Повний текст джерелаSchimmelpfennig, Tassilo Maria, Ivan Perfilov, Jan Streckenbach, and Eckart Uhlmann. "Comparison of Conventional and Dry Electrical Discharge Machining." Applied Mechanics and Materials 794 (October 2015): 278–84. http://dx.doi.org/10.4028/www.scientific.net/amm.794.278.
Повний текст джерелаSchulze, Hans Peter. "Applications of the Electro-Contact-Discharge Machining (ECoDM) and the Analysis of Different Process Parts." Key Engineering Materials 504-506 (February 2012): 1195–200. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.1195.
Повний текст джерелаPark, Jin Woo, Do Kwan Chung, Bo Hyun Kim, Jong Girl Ok, Wal Jun Kim, Yong Hyup Kim, and Chong Nam Chu. "Wire electrical discharge machining of carbon nanofiber mats for field emission." International Journal of Precision Engineering and Manufacturing 13, no. 4 (April 2012): 593–99. http://dx.doi.org/10.1007/s12541-012-0076-5.
Повний текст джерелаKIFUJI, Akio, Xiaoyou ZHANG, and Dongjue HE. "A08 A Long Stroke Magnetic Drive Actuator for Electrical Discharge Machining." Proceedings of The Manufacturing & Machine Tool Conference 2012.9 (2012): 27–28. http://dx.doi.org/10.1299/jsmemmt.2012.9.27.
Повний текст джерела