Статті в журналах з теми "Magnetic abrasive tool"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Magnetic abrasive tool".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Yin, Cheng, Lida Heng, Jeong Kim, Min Kim, and Sang Mun. "Development of a New Ecological Magnetic Abrasive Tool for Finishing Bio-Wire Material." Materials 12, no. 5 (March 1, 2019): 714. http://dx.doi.org/10.3390/ma12050714.
Повний текст джерелаSaito, T., K. Koike, H. Yamato, A. Kuwana, A. Suzuki, H. Yamaguchi, and Takeo Shinmura. "Development of Gas-Atomized Magnetic Tools." Key Engineering Materials 291-292 (August 2005): 287–90. http://dx.doi.org/10.4028/www.scientific.net/kem.291-292.287.
Повний текст джерелаKrymskii, M. D. "Shaping of powdered magnetic-abrasive tools. III. Shaping of an annular rotating magnetic-abrasive tool." Soviet Powder Metallurgy and Metal Ceramics 30, no. 9 (September 1991): 756–60. http://dx.doi.org/10.1007/bf00794215.
Повний текст джерелаLuo, Zhong Ping, and Ya Lin Yao. "A Study on the Methods for Precise Sorting of Synthetic Diamond Abrasives." Key Engineering Materials 304-305 (February 2006): 66–70. http://dx.doi.org/10.4028/www.scientific.net/kem.304-305.66.
Повний текст джерелаKrymskii, M. D. "Magnetic properties of a powder magnetic-abrasive tool." Powder Metallurgy and Metal Ceramics 33, no. 1-2 (1995): 33–36. http://dx.doi.org/10.1007/bf00559704.
Повний текст джерелаChai, Jing Fu, Qiu Sheng Yan, Ling Ye Kong, and Min Li. "Research on the Constraint Mechanism of Abrasive Particle of MR Effect-Based Tiny-Grinding Wheel." Advanced Materials Research 135 (October 2010): 46–51. http://dx.doi.org/10.4028/www.scientific.net/amr.135.46.
Повний текст джерелаDing, Y. H., Xin Gai Yao, G. Ya, and P. Lu. "Investigation of a New Kind of Magnetic Abrasive Grains Used for Finishing Inner-Hole Surface." Key Engineering Materials 487 (July 2011): 289–92. http://dx.doi.org/10.4028/www.scientific.net/kem.487.289.
Повний текст джерелаHan, Guang Chao, Ming Sun, and Jing Dong Li. "Experimental Research on the Robotic Compound Polishing Process with Mixed Magnetic Abrasive." Advanced Materials Research 129-131 (August 2010): 118–23. http://dx.doi.org/10.4028/www.scientific.net/amr.129-131.118.
Повний текст джерелаXu, L. J. "Study on the Magnetic Abrasive Finishing Based on 5-DOF Machine Tool." Materials Science Forum 628-629 (August 2009): 317–22. http://dx.doi.org/10.4028/www.scientific.net/msf.628-629.317.
Повний текст джерелаYu, Juan, Qiu Sheng Yan, Jia Bin Lu, and Wei Qiang Gao. "Research on Material Removal of a New Micro Machining Technology Based on the Magnetorheological Effect of Abrasive Slurry." Key Engineering Materials 364-366 (December 2007): 914–19. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.914.
Повний текст джерелаMaiboroda, Viktor S. "Rheological Properties of a Powder Magnetic Abrasive Tool." Powder Metallurgy and Metal Ceramics 42, no. 5/6 (May 2003): 315–21. http://dx.doi.org/10.1023/a:1025736116399.
Повний текст джерелаMaiboroda, V. S., V. Ya Shlyuko, N. L. Taranenko, and O. V. Stepanov. "Electrical resistivity of a particulate magnetic-abrasive tool." Soviet Powder Metallurgy and Metal Ceramics 31, no. 4 (April 1992): 353–56. http://dx.doi.org/10.1007/bf00796291.
Повний текст джерелаJo, S. R., S. L. Ko, and Yuri M. Baron. "Effective Deburring of the Burr at Intersecting Hole by Permanent Magnet Inductor." Advanced Materials Research 24-25 (September 2007): 29–38. http://dx.doi.org/10.4028/www.scientific.net/amr.24-25.29.
Повний текст джерелаLiu, G. Y., Zhong Ning Guo, Yuan Bo Li, and J. W. Liu. "Composite Tools Design for Electrolytic Magnetic Abrasive Finishing Process with FEM." Advanced Materials Research 325 (August 2011): 536–41. http://dx.doi.org/10.4028/www.scientific.net/amr.325.536.
Повний текст джерелаZhao, Xuefeng, Hao Qin, Yong Yang, Ke You, Xiaolong Yin, and Yin Yuan. "Study on magnetic preparation of dual disk based on silica gel magneto-elastic abrasive particles." Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 39, no. 6 (December 2021): 1304–11. http://dx.doi.org/10.1051/jnwpu/20213961304.
Повний текст джерелаBaron, Yuri M., S. L. Ko, and Jung Il Park. "Characterization of the Magnetic Abrasive Finishing Method and Its Application to Deburring." Key Engineering Materials 291-292 (August 2005): 291–96. http://dx.doi.org/10.4028/www.scientific.net/kem.291-292.291.
Повний текст джерелаYamaguchi, H., J. Kang, and F. Hashimoto. "Metastable austenitic stainless steel tool for magnetic abrasive finishing." CIRP Annals 60, no. 1 (2011): 339–42. http://dx.doi.org/10.1016/j.cirp.2011.03.119.
Повний текст джерелаZou, Yan Hua, and Takeo Shinmura. "Development of a New Ultra-Precision Magnetic Abrasive Finishing Process." Key Engineering Materials 523-524 (November 2012): 256–61. http://dx.doi.org/10.4028/www.scientific.net/kem.523-524.256.
Повний текст джерелаMarczak, Michał, Adrian Kopytowski, Rafał Nowicki, and Grigor Stambolov. "The idea of measuring the real induction in the machining gap filled with magnetic material." Welding Technology Review 91, no. 6 (October 5, 2019): 22–28. http://dx.doi.org/10.26628/wtr.v91i6.993.
Повний текст джерелаChang, Fu Ming, Tung Hsien Tsai, and Sheng Han Chiang. "Sensitivity Analysis of Magnetic Abrasive Finishing Process Parameters." Advanced Materials Research 328-330 (September 2011): 868–80. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.868.
Повний текст джерелаUddin, Mohammad, Vincent Santos, and Romeo Marian. "Interplay of Process Variables in Magnetic Abrasive Finishing of AISI 1018 Steel Using SiC and Al2O3 Abrasives." Journal of Manufacturing and Materials Processing 3, no. 2 (March 28, 2019): 29. http://dx.doi.org/10.3390/jmmp3020029.
Повний текст джерелаMa, Lei, Tatsuya Furuki, Takashi Kure, Toshiki Hirogaki, and Eiichi Aoyama. "Development of Polishing Tool Capable of Self-Adaptive to Processing Site Using Steel Balls and Magnetic Force." Advanced Materials Research 1136 (January 2016): 466–71. http://dx.doi.org/10.4028/www.scientific.net/amr.1136.466.
Повний текст джерелаPattanaik, Laxmi Narayan, and Himanshu Agarwal. "Magnetorheological Finishing (MRF) of a Freeform Non-magnetic Work Material." Journal for Manufacturing Science and Production 15, no. 3 (September 15, 2015): 249–56. http://dx.doi.org/10.1515/jmsp-2014-0034.
Повний текст джерелаJAYSWAL, S. C., V. K. JAIN, and P. M. DIXIT. "MAGNETIC ABRASIVE FINISHING PROCESS — A PARAMETRIC ANALYSIS." Journal of Advanced Manufacturing Systems 04, no. 02 (December 2005): 131–50. http://dx.doi.org/10.1142/s0219686705000655.
Повний текст джерелаChen, Y., X. Wang, and C. J. Zhang. "Polishing Processing to Internal Surface of Non-Magnetic Pipe by Magnetic Abrasive Finishing." Advanced Materials Research 53-54 (July 2008): 137–40. http://dx.doi.org/10.4028/www.scientific.net/amr.53-54.137.
Повний текст джерелаLiu, Jiangnan, and Yanhua Zou. "Study on Mechanism of Roundness Improvement by the Internal Magnetic Abrasive Finishing Process Using Magnetic Machining Tool." Machines 10, no. 2 (February 2, 2022): 112. http://dx.doi.org/10.3390/machines10020112.
Повний текст джерелаZhao, Yugang. "NEW KIND OF MACHINE TOOL FOR MAGNETIC ABRASIVE FINISHING COMPLEX SURFACE." Chinese Journal of Mechanical Engineering 36, no. 03 (2000): 100. http://dx.doi.org/10.3901/jme.2000.03.100.
Повний текст джерелаGao, Wei Qiang, L. Meng, Qiu Sheng Yan, J. H. Song, and T. X. Qiu. "The Research of NC Magnetic Abrasive Finishing for Mould Parting Surface." Key Engineering Materials 389-390 (September 2008): 199–204. http://dx.doi.org/10.4028/www.scientific.net/kem.389-390.199.
Повний текст джерелаLu, Cong Da, Xiao Jun Gong, Hong Jia, and Guo Zhong Chai. "Study on the Fluid Magnetic Abrasive Polishing Technology." Advanced Materials Research 102-104 (March 2010): 495–501. http://dx.doi.org/10.4028/www.scientific.net/amr.102-104.495.
Повний текст джерелаZelinko, Andrii, Florian Welzel, Dirk Biermann, and Viktor Maiboroda. "Influence of Process Parameters and Initial Surface on Magnetic Abrasive Finishing of Flat Surfaces on CNC Machine Tools." Journal of Manufacturing and Materials Processing 5, no. 4 (October 14, 2021): 108. http://dx.doi.org/10.3390/jmmp5040108.
Повний текст джерелаSingh, Palwinder, Lakhvir Singh, and Sehijpal Singh. "Preparation, Microstructure Evaluation and Performance Analysis of Diamond-Iron Bonded Magnetic Abrasive Powder." Powder Metallurgy Progress 19, no. 2 (December 1, 2019): 82–89. http://dx.doi.org/10.1515/pmp-2019-0008.
Повний текст джерелаHoushi, Mohannad Naeem. "A Comprehensive Review on Magnetic Abrasive Finishing Process." Advanced Engineering Forum 18 (September 2016): 1–20. http://dx.doi.org/10.4028/www.scientific.net/aef.18.1.
Повний текст джерелаPhan, Van Hieu. "A new tool developed for ultraprecision milling nickel by using magnetic liquid slurries." International Journal of Modern Physics B 35, no. 14n16 (June 12, 2021): 2140034. http://dx.doi.org/10.1142/s0217979221400348.
Повний текст джерелаLee, Jung In, Jae Seob Kwak, and Dae Min Kang. "Evaluation of Precision Machining Characteristics for MAP of Magnesium Alloy." Materials Science Forum 610-613 (January 2009): 1395–402. http://dx.doi.org/10.4028/www.scientific.net/msf.610-613.1395.
Повний текст джерелаB. Gunjal, Sandip, and Padmakar J. Pawar. "Improving the process performance of magnetic abrasive finishing of SS304 material using multi-objective artificial bee colony algorithm." Engineering review 41, no. 1 (2020): 34–49. http://dx.doi.org/10.30765/er.1511.
Повний текст джерелаZou, Yanhua. "708 Development of ultra-precision magnetic abrasive finishing process for plate using magnetic using the magnetic machining tool." Proceedings of Ibaraki District Conference 2014.22 (2014): 111–12. http://dx.doi.org/10.1299/jsmeibaraki.2014.22.111.
Повний текст джерелаAhmed, Baqer Ayad, Saad Kariem Shather, and Wisam Kadhim Hamdan. "Statistical Analysis of Metal Removal during Magnetic Abrasive Finishing Process." Journal of Engineering 26, no. 8 (August 1, 2020): 34–45. http://dx.doi.org/10.31026/j.eng.2020.08.03.
Повний текст джерелаWu, Yong Bo, and Kunio Shimada. "Quartz Wafer Machining Using MCF (Magnetic Compound Fluid) Polishing Liquid Frozen with Liquid Nitrogen." Key Engineering Materials 389-390 (September 2008): 187–92. http://dx.doi.org/10.4028/www.scientific.net/kem.389-390.187.
Повний текст джерелаNagdeve, Leeladhar, Krishnakant Dhakar, and Harish Kumar. "Development of novel finishing tool into Magnetic Abrasive Finishing process of Aluminum 6061." Materials and Manufacturing Processes 35, no. 10 (May 24, 2020): 1129–34. http://dx.doi.org/10.1080/10426914.2020.1767295.
Повний текст джерелаMa, Lei, Tatsuya Furuki, Wei Wu, Toshiki Hirogaki, and Eiichi Aoyama. "Estimation of Unsteady and Steady Polishing Force in Magnetic Abrasive Finishing Using a Permanent Magnet End-Mill Tool." Materials Science Forum 874 (October 2016): 178–83. http://dx.doi.org/10.4028/www.scientific.net/msf.874.178.
Повний текст джерелаZou, Yanhua. "C28 Study on an internal magnetic abrasive finishing process of bent tube using the magnetic machining tool." Proceedings of The Manufacturing & Machine Tool Conference 2014.10 (2014): 173–74. http://dx.doi.org/10.1299/jsmemmt.2014.10.173.
Повний текст джерелаIkonnikov, Alexey, and Sergey Leonov. "Theoretical-Probability Model of Metal Removal During Magnetic-Abrasive Treatment." MATEC Web of Conferences 297 (2019): 09007. http://dx.doi.org/10.1051/matecconf/201929709007.
Повний текст джерелаIkonnikov, Alexey, and Sergey Leonov. "Theoretical-Probability Model for Calculating Roofness in Magnetic Abrasive Machining." MATEC Web of Conferences 346 (2021): 01045. http://dx.doi.org/10.1051/matecconf/202134601045.
Повний текст джерелаGuo, Ce, Dongliang Zhang, Xiuhong Li, Jing Liu, and Feng Li. "A permanent magnet tool in ultrasonic assisted magnetic abrasive finishing for 30CrMnSi grooves part." Precision Engineering 75 (May 2022): 180–92. http://dx.doi.org/10.1016/j.precisioneng.2022.02.010.
Повний текст джерелаAhmed, Baqer A., Saad K. Shather, and Wisam K. Hamdan. "Improve the Micro-hardness of Single Point Incremental Forming Product Using Magnetic Abrasive Finishing." Engineering and Technology Journal 38, no. 8A (August 25, 2020): 1137–42. http://dx.doi.org/10.30684/etj.v38i8a.906.
Повний текст джерелаXing, Baijun, and Yanhua Zou. "Investigation of Finishing Aluminum Alloy A5052 Using the Magnetic Abrasive Finishing Combined with Electrolytic Process." Machines 8, no. 4 (November 19, 2020): 78. http://dx.doi.org/10.3390/machines8040078.
Повний текст джерелаSathua, Chandra Sekhar, V. K. Jain, J. Ramkumar, and Ajay Sidpara. "Analysis of forces and surface roughness in magnetic abrasive finishing with a ball-end tool." International Journal of Precision Technology 3, no. 2 (2013): 131. http://dx.doi.org/10.1504/ijptech.2013.053301.
Повний текст джерелаDenkena, B., J. Köhler, and A. Schindler. "Behavior of the magnetic abrasive tool for cutting edge preparation of cemented carbide end mills." Production Engineering 8, no. 5 (July 4, 2014): 627–33. http://dx.doi.org/10.1007/s11740-014-0569-4.
Повний текст джерелаGrover, Vishwas, and Anant Kumar Singh. "Modeling of surface roughness in the magnetorheological cylindrical finishing process." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 233, no. 1 (December 13, 2017): 104–17. http://dx.doi.org/10.1177/0954408917746354.
Повний текст джерелаMontazerolghaem, Hamid, and Esmaeil Soltani. "Design an Apparatus for Obtaining to High Precision Surface of Miniature Parts Based on Magnetized Abrasive Grains Finishing Process." Key Engineering Materials 504-506 (February 2012): 1377–82. http://dx.doi.org/10.4028/www.scientific.net/kem.504-506.1377.
Повний текст джерела