Добірка наукової літератури з теми "Magnetic abrasive powder"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Magnetic abrasive powder".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Magnetic abrasive powder"
Patil, Mahadev Gouda, Kamlesh Chandra, and P. S. Misra. "Study of Magnetic Abrasive Finishing Using Mechanically Alloyed Magnetic Abrasives." Advanced Materials Research 585 (November 2012): 517–21. http://dx.doi.org/10.4028/www.scientific.net/amr.585.517.
Повний текст джерелаHanada, Kotaro, and Hitomi Yamaguchi. "Development of Spherical Iron-Based Composite Powder with Carried Alumina Abrasive Grains by Plasma Spray." Advanced Materials Research 75 (June 2009): 43–46. http://dx.doi.org/10.4028/www.scientific.net/amr.75.43.
Повний текст джерелаSingh, Palwinder, Lakhvir Singh, and Sehijpal Singh. "Finishing of Tubes using Bonded Magnetic Abrasive Powder in an Abrasive Medium." Powder Metallurgy Progress 20, no. 1 (June 1, 2020): 1–11. http://dx.doi.org/10.2478/pmp-2020-0001.
Повний текст джерелаBaron, Yuri M., S. L. Ko, and Jung Il Park. "Characterization of the Magnetic Abrasive Finishing Method and Its Application to Deburring." Key Engineering Materials 291-292 (August 2005): 291–96. http://dx.doi.org/10.4028/www.scientific.net/kem.291-292.291.
Повний текст джерелаYin, Cheng, Lida Heng, Jeong Kim, Min Kim, and Sang Mun. "Development of a New Ecological Magnetic Abrasive Tool for Finishing Bio-Wire Material." Materials 12, no. 5 (March 1, 2019): 714. http://dx.doi.org/10.3390/ma12050714.
Повний текст джерелаZhao, Zeng Dian, Yu Hong Huang, and Yu Gang Zhao. "Preparation of Magnetic Abrasive by Sintering Method." Advanced Materials Research 135 (October 2010): 382–87. http://dx.doi.org/10.4028/www.scientific.net/amr.135.382.
Повний текст джерелаBansal, Ankit, Ravi Butola, M. S. Niranjan, Qasim Murtaza, and Umang Soni. "Synthesis and Characterization of Sintered Magnetic Abrasives Used in Advance Finishing Processes Through Powder Metallurgy Route." INTERNATIONAL JOURNAL OF ADVANCED PRODUCTION AND INDUSTRIAL ENGINEERING 5, no. 3 (July 5, 2020): 27–33. http://dx.doi.org/10.35121/ijapie202007345.
Повний текст джерелаKrymskii, M. D. "Magnetic properties of a powder magnetic-abrasive tool." Powder Metallurgy and Metal Ceramics 33, no. 1-2 (1995): 33–36. http://dx.doi.org/10.1007/bf00559704.
Повний текст джерелаJo, S. R., S. L. Ko, and Yuri M. Baron. "Effective Deburring of the Burr at Intersecting Hole by Permanent Magnet Inductor." Advanced Materials Research 24-25 (September 2007): 29–38. http://dx.doi.org/10.4028/www.scientific.net/amr.24-25.29.
Повний текст джерелаTatarkin, Evgeniy, Aleksey Ikonnikov, Tatyana Schrayner, and Roman Grebenkov. "Modeling of the Magnetic Abrasive Machining Process of Flat Surface Workpieces on Numerically Controlled Machine Tools." Applied Mechanics and Materials 788 (August 2015): 69–74. http://dx.doi.org/10.4028/www.scientific.net/amm.788.69.
Повний текст джерелаДисертації з теми "Magnetic abrasive powder"
Іщик, Дмитро Володимирович. "Підвищення якості свердел із швидкорізальної сталі при магнітно-абразивному обробленні". Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/26703.
Повний текст джерелаDissertation for a Master's degree in specialty 133 – Branch mechanical - engineering. - National Technical University of Ukraine "Kyiv Polytechnic Institute named after Igor Sikorsky". - Kyiv, 2018. Having analyzed the modern methods of improving the quality and productivity of the cutting edge of the metal cutting tool, on the example of the drill, the method of magnetic abrasive treatment was chosen. This method has allowed to achieve a significant improvement in the quality of the cutting edge (roughness), an increase in the hardness of the surface layer and, respectively, the period of drill firmness. In the dissertation the ways of solving the problem of instrument stability during work are analyzed, the process of MAO is investigated by carrying out operational tests of the drills processed by this method. Magnetically-abrasive powders were selected in the light of previous work in this field, namely, the use of powders of large fractions. The results of the studies confirmed the feasibility of their use, along with small fractions powders. Experimental data were used and implemented at the enterprise "Kyiv Armored Plant".
Частини книг з теми "Magnetic abrasive powder"
Lebedev, Vladimir, Svetlana Yakubovskaya, Eshreb Dzhemilov, and Ruslan Dzhemalyadinov. "Cladded Ferromagnetic Powders for Magnetic Abrasive Working of Hard Alloys." In Lecture Notes in Mechanical Engineering, 302–12. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-91327-4_30.
Повний текст джерелаYuan, Yongtao, Liqiang Qi, Qian Yang, and Jing Liu. "Experimental Study on Ash-unloader for Magnetic Seal without Abrasion." In Challenges of Power Engineering and Environment, 705–9. Berlin, Heidelberg: Springer Berlin Heidelberg, 2007. http://dx.doi.org/10.1007/978-3-540-76694-0_132.
Повний текст джерелаТези доповідей конференцій з теми "Magnetic abrasive powder"
Ikonnikov, A. M. "Analysis of Magnetic Forces in the Working Clearance with Magnetic-Abrasive Treatment of Inductors on Standing Magnets." In Modern Trends in Manufacturing Technologies and Equipment. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901755-31.
Повний текст джерелаTehrani, Alireza Fadaei, Mehrdad Givi, and Ashkan Sepehr Afghan. "Investigation of Magnetic Abrasive Finishing for Internal Polishing of Aluminium Tubes Using DOE." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-38811.
Повний текст джерелаMa, Lei, Toshiki Hirogaki, Eiichi Aoyama, Wei Wu, and Tatsuya Furuki. "Control of Pressing Force in Magnetic Abrasive Finishing Using Permanent Magnet End-Mill Tool." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-2781.
Повний текст джерелаBucko, Samuel, Martin Krchnak, Roman Cimbala, Lukas Kruzelak, and Jan Zbojovsky. "Abrasive properties of transformer oil-based magnetic nanofluid." In 2018 19th International Scientific Conference on Electric Power Engineering (EPE). IEEE, 2018. http://dx.doi.org/10.1109/epe.2018.8396038.
Повний текст джерелаRoss, Daniel, Yanming Wang, Hadyan Ramadhan, and Hitomi Yamaguchi. "Polishing Characteristics of Transparent Polycrystalline YAG Ceramics Using Magnetic Field-Assisted Finishing." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8766.
Повний текст джерелаSingh, D. K., V. K. Jain, V. Raghuram, and R. Komanduri. "Analysis of Surface Roughness and Surface Texture Generated by Pulsating Flexible Magnetic Abrasive Brush (P-FMAB)." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63134.
Повний текст джерелаJianqiang, Chen, Sun Zhe, Yang Guojun, Liu Xingnan, and Shi Zhengang. "Research on Rolling-Sliding Integrated Auxiliary Bearing and its Application in High Temperature Reactor." In 2017 25th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/icone25-67544.
Повний текст джерела