Добірка наукової літератури з теми "Magnetic abrasive"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Magnetic abrasive".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Magnetic abrasive"
Patil, Mahadev Gouda, Kamlesh Chandra, and P. S. Misra. "Study of Magnetic Abrasive Finishing Using Mechanically Alloyed Magnetic Abrasives." Advanced Materials Research 585 (November 2012): 517–21. http://dx.doi.org/10.4028/www.scientific.net/amr.585.517.
Повний текст джерелаKomanduri, R., N. Umehara, and M. Raghunandan. "On the Possibility of Chemo-Mechanical Action in Magnetic Float Polishing of Silicon Nitride." Journal of Tribology 118, no. 4 (October 1, 1996): 721–27. http://dx.doi.org/10.1115/1.2831600.
Повний текст джерелаMASAKI, Koichi, Masahiro ANZAI, and Takeo NAKAGAWA. "Magnetic abrasive finishing using PPM magnetic abrasives." Journal of the Japan Society for Precision Engineering 56, no. 5 (1990): 935–40. http://dx.doi.org/10.2493/jjspe.56.935.
Повний текст джерелаLi, Wen Hui, Hong Ling Chen, Sheng Qiang Yang, and Shi Chun Yang. "Research of Magnetic Induction Intensity on Magnetic Abrasive Finishing." Key Engineering Materials 455 (December 2010): 174–80. http://dx.doi.org/10.4028/www.scientific.net/kem.455.174.
Повний текст джерелаSingh, Palwinder, and Lakhvir Singh. "Experimental Examination on Finishing Characteristics of Aluminum Pipes in Magnetic Abrasive Machining Using SiC Contained Glued Magnetic Abrasives." Trends in Sciences 19, no. 19 (October 4, 2022): 6182. http://dx.doi.org/10.48048/tis.2022.6182.
Повний текст джерелаZhang, H., and W. D. Li. "Research on the Finishing Mechanism of Fluid Magnetic Abrasives." Key Engineering Materials 455 (December 2010): 211–15. http://dx.doi.org/10.4028/www.scientific.net/kem.455.211.
Повний текст джерелаYin, Cheng, Lida Heng, Jeong Kim, Min Kim, and Sang Mun. "Development of a New Ecological Magnetic Abrasive Tool for Finishing Bio-Wire Material." Materials 12, no. 5 (March 1, 2019): 714. http://dx.doi.org/10.3390/ma12050714.
Повний текст джерелаMa, Fujian, Ziguang Wang, Yu Liu, Zhihua Sha, and Shengfang Zhang. "Machining Performance for Ultrasonic-Assisted Magnetic Abrasive Finishing of a Titanium Alloy: A Comparison with Magnetic Abrasive Finishing." Machines 10, no. 10 (October 6, 2022): 902. http://dx.doi.org/10.3390/machines10100902.
Повний текст джерелаHu, Bin, and Ya Ping Lu. "Study on Preparation Technology and Finishing Performance of Magnetic Abrasive Grain." Advanced Materials Research 452-453 (January 2012): 637–41. http://dx.doi.org/10.4028/www.scientific.net/amr.452-453.637.
Повний текст джерелаLi, Wei Dong, Ming Lv, and Hong Zhang. "The Role of Nanometer Silicon Dioxide in the Modification of Fluid Magnetic Abrasive." Materials Science Forum 694 (July 2011): 229–33. http://dx.doi.org/10.4028/www.scientific.net/msf.694.229.
Повний текст джерелаДисертації з теми "Magnetic abrasive"
森, 敏彦, Toshihiko MORI, 健治 広田, Kenji HIROTA, 進幸 千田, Shinkoh SENDA, 義人 川嶋 та Yoshihito KAWASHIMA. "磁気研磨機構に関する力学的考察". 日本機械学会, 2002. http://hdl.handle.net/2237/9029.
Повний текст джерелаІщик, Дмитро Володимирович. "Підвищення якості свердел із швидкорізальної сталі при магнітно-абразивному обробленні". Master's thesis, Київ, 2018. https://ela.kpi.ua/handle/123456789/26703.
Повний текст джерелаDissertation for a Master's degree in specialty 133 – Branch mechanical - engineering. - National Technical University of Ukraine "Kyiv Polytechnic Institute named after Igor Sikorsky". - Kyiv, 2018. Having analyzed the modern methods of improving the quality and productivity of the cutting edge of the metal cutting tool, on the example of the drill, the method of magnetic abrasive treatment was chosen. This method has allowed to achieve a significant improvement in the quality of the cutting edge (roughness), an increase in the hardness of the surface layer and, respectively, the period of drill firmness. In the dissertation the ways of solving the problem of instrument stability during work are analyzed, the process of MAO is investigated by carrying out operational tests of the drills processed by this method. Magnetically-abrasive powders were selected in the light of previous work in this field, namely, the use of powders of large fractions. The results of the studies confirmed the feasibility of their use, along with small fractions powders. Experimental data were used and implemented at the enterprise "Kyiv Armored Plant".
Джулій, Д. Ю., В. С. Майборода та T. Emmer. "Формування радіусу округлення різальних кромок зубонарізних зубків при магнітно-абразивному обробленні". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38109.
Повний текст джерелаТкачук, І. В., та В. С. Майборода. "Формування магнітно-абразивного інструменту на установках з кільцевим розташуванням робочої зони". Thesis, Сумський державний університет, 2014. http://essuir.sumdu.edu.ua/handle/123456789/38153.
Повний текст джерелаChang, Geeng-Wei, and 張耿維. "Study on finishing characteristics of magnetic abrasive finishing and electrolytic magnetic abrasive finishing." Thesis, 2003. http://ndltd.ncl.edu.tw/handle/84632633599821840030.
Повний текст джерела國立中央大學
機械工程研究所
92
Abstract Magnetic abrasive finishing (MAF) is a precise polishing method that the cutting tool is a group of magnetic abrasives, which the abrasion pressure is controlled by a magnetic filed. A limited amount of material will be removed by conducting a relative motion between the work surface and the abrasives, so as to obtain a mirrorlike finished surface. Owing to the magnetic field, the magnetic abrasives will gather to form a flexible magnetic brush. Thus the magnetic abrasives can move and polish along the profile of a complex surface, so the surface with complex shapes can be finished. Furthermore, the disturbances from the structure due to vibration or chatter will not affect the quality of the finished surface. The unbonded magnetic abrasive (UMA) used in this study is a mechanical mixture of ferromagnetic particles and abrasives. The finishing characteristics of UMA in cylindrical MAF are investigated, and then an application on improving the electrical discharge machined surfaces is performed. Experimental results demonstrate that the finishing characteristics of UMA are as good as those of sintered magnetic abrasives, which is much more expensive than UMA. The surface roughness of the SKD11 workpiece with HRC55 hardness can be improved from 0.25mm Ra to 0.042mm Ra after a few minutes of finishing. An improved MAF, which transfers the abrasion pressure to the abrasives through a sheet of unwoven cloth, can further improve the surface roughness of the workpiece to a level of 0.017mm Ra. Concerning the peripheral electrical discharge machined surfaces, MAF can remove the recast layer and the micro cracks easily, and a refined surface of 0.04mm Ra will be obtained. To elevate the finishing performance, an electrolytic magnetic abrasive finishing (EMAF), which is a compound polishing process by involving the traditional MAF and electrolysis, is developed. The passive film, whose hardness is lower than that of the original metal surface, is produced on the work surface, and is then removed by MAF during processing of EMAF. The finishing characteristics of EMAF are investigated, and then the results are compared with those of MAF concerning the cylindrical finishing of the SKD11 workpiece and the internal finishing of a circular pipe with AISI 304 stainless steel. Experimental results show that the finishing characteristics of EMAF are better than that of MAF. Despite what kind of surface is finished, EMAF yields a better surface roughness and higher material removal than MAF did. Especially in the case of the cylindrical finishing of SKD11, a mirrorlike finished surface of 0.017mm Ra can be produced from 0.178mm Ra after 5 minutes of finishing using EMAF. This study describes the principles of the process of MAF and EMAF, the finishing characteristics of surface roughness and material removal, and the associated mechanisms. Additionally, the theory, that the path of the electrolytic ions toward the anode surface is changed into a cycloid curve under the effect of the Lorentz force, and the forms of the passive film that is produced on the work surface in EMAF, are also described in detail. Some experiments on the only electrolytic process without MAF are performed to analyze the synergistic effect between MAF and electrolysis. Experimental results show that EMAF will produce rather large amount of extra material removal under proper process conditions due to the synergism of them. To determine the optimum process conditions for improving the surface finish and increasing the material removal in cylindrical EMAF, experiments using the Taguchi method and L18 orthogonal array are performed. Further, the significances of the control factors are identified with the assistance of analysis of variance (ANOVA).
Huang, Wen-Ke, and 黃文科. "Study of Magnetic Abrasive Polishing." Thesis, 2001. http://ndltd.ncl.edu.tw/handle/56888999908321793984.
Повний текст джерела國立雲林科技大學
機械工程系碩士班
89
Some stainless steel tube and aluminum alloy tube have many small holes, which are so slender that a conventional grinding tool is hardly inserted into the tube deeply, being impossible to machine down. A new high-efficiency technology of polishing method is created name magnetic abrasive polishing in which the suitable concentrative magnetic flux is performed in the inner working region of tube by N-S magnetic poles set in the outer side so that magnetic force as machining pressure acts upon magnetic abrasive particles to the internal surface. It is finishing performance using magnetic abrasives made of both iron and alumna. The iron particles generate finishing pressure by the magnetic field and magnetic abrasive also have a finishing effect on the inner surface of tubing. Magnetic abrasive finishing process is thought as one of possible methods for the automation of 3D mold surface finish in which is modified for applying to 2D free form surface and 3D curved surface. Magnetic abrasive polishing is used simple equipment and a few of workers and the possibility of precision edge finishing is confirmed. In the experiments showed that a work piece is finished smoothly 5 minutes from the un-machined surface roughness value of about Rmax 1.2μm to the machined value of Rmax 0.25μm
Denni and 詹凱翔. "Development of the Gel Magnetic Abrasive Finishing." Thesis, 2006. http://ndltd.ncl.edu.tw/handle/82113683441092712283.
Повний текст джерела清雲科技大學
機械工程研究所
94
This research mainly had employed the gel magnetic abrasive finishing for grinding the surface of the mold steel. A magnetic abrasive cutting tool installed in the CNC machine was used to attract the magnetic abrasive gel. A flexible magnetic brush was produced when the magnetic field was applied in the gel. The surface roughness of the working pieces would be improved by this finishing method. In the experiment, the factors of the rotating speed, the abrasive size, the iron particle size, the abrasive concentration, and the grinding amount were used to improve the machining rate of the gel magnetic abrasive finishing. Based on the above research, the Taguchi method was adopted to find optimum parameters from the experiment. The roughness improved rate would reach to 92% after a 30 minute machining and the surface roughness of the working pieces would reduce to 0.083μm.
Cheng, Tsung-Jen, and 鄭棕仁. "Study of magnetic abrasive finishing combined with electrolytic process." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/59943677654032836344.
Повний текст джерелаLin, Ching-Tien, and 林清田. "Characteristic study in magnetic abrasive finishing of SUS304 material." Thesis, 2004. http://ndltd.ncl.edu.tw/handle/41104662028534644980.
Повний текст джерела國立中興大學
機械工程學系
92
Abstract This research mainly employed the magnetic abrasive finishing method to process the stainless SUS304 material in face abrasive operations. The operations were demonstrated in the permanent magnetic field and the electrical magnetic polishing mechanism, it was installed in the CNC machining center. The operations were conducted using Taguchi experimental design, the effects among the parameters such as magnetic field, revolution, feed rate, gap, abrasive, and coolant, were considered. The experimental data was collected by way of the Taguchi experimental design and the data were analyzed statistically, the ANOVA was shown the effect of the process parameters. The confirmation experiments showed the optimal operational condition of surface roughness and material removal quantity. The collected data were analyzed using statistical software in order to establish a nonlinear regression model of abrasive magnetic process parameter and quality characteristic. The optimal parameter condition in processing the stainless SUS304 material was conducted using two stage processes; the first stage was rough cutting in the material and then finished cutting the material. Prior to the rough cutting, the Rmax value is equal to 2.572 um, after the rough cutting the Rmax value is equal to 0.153 um. The finished cutting can even obtain a more precious Rmax value being equal to 0.100 um which is like mirror surface. It can be proved that magnetic abrasive finishing is one of the highest efficiency and precision technologies.
Chiang, Sheng-Han, and 江昇翰. "The characteristics of Magnetic Abrasive Finishing and Sensitivity Analysis." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/32750983682428230157.
Повний текст джерела修平科技大學
精密機械與製造科技研究所
99
Magnetic abrasive finishing is process of abrasive machining conditions, by using magnetic field energy and abrasives on different such as spindle speed, feed rate, abrasive size and the gap between tool and workpiece etc. Magnetic abrasive finishing can effectively remove burrs and increase surface finish, especially suited for the inner hole and groove. Magnetic abrasive finishing not only provides workpiece with high machining accuracy and minimal surface damage, but also has the advantages of mass production and speed. This paper integrates machine center cutting process and magnetic abrasive finishing (MAF) producing a combined process that improves the magnetic abrasive loss rate (MALR) and surface roughness (SR) of aluminum alloy 6061-T6 with ladder shape of different height. The present study shows the features of the development with mathematical model based on response surface methodology (RSM) for correlating the interactive and second order influences of major machining parameters such as different size and shape abrasive of stainless, spindle speed, tool and workpiece gap, feed speed, respectively. The experiments design, regression analysis and analysis of variance are used to develop the relationships between process parameters (abrasive size, spindle speed, tool and workpiece gap, feed speed) and responses (MALR and SR) in MAF process. Sensitivity analysis has also been carried out using developed empirical equations. The results shows that developed mathematical models can be applied to estimate the effectiveness of process parameters for MALR and SR with a change of spindle speed affects the MALR more strongly than SR relatively compare to other parameters.
Книги з теми "Magnetic abrasive"
Miyoshi, Kazuhisa. Abrasion and deformed layer formation of manganese-zinc ferrite in sliding contact with lapping tapes. [Cleveland, Ohio: National Aeronautics and Space Administration, Lewis Research Center, 1986.
Знайти повний текст джерелаЧастини книг з теми "Magnetic abrasive"
Khan, Dilshad Ahmad, Zafar Alam, and Faiz Iqbal. "Magnetic Abrasive Finishing." In Magnetic Field Assisted Finishing, 27–50. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003228776-2.
Повний текст джерелаYang, Shengqiang, and Wenhui Li. "Magnetic Abrasive Finishing Technology." In Surface Finishing Theory and New Technology, 225–335. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-54133-3_3.
Повний текст джерелаSingh, Sachin, Vishal Gupta, and M. R. Sankar. "Magnetic Abrasive Finishing Process." In Materials Forming, Machining and Tribology, 183–210. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-43312-3_8.
Повний текст джерелаKhan, Dilshad Ahmad, Zafar Alam, and Faiz Iqbal. "Magnetorheological Abrasive Flow Finishing." In Magnetic Field Assisted Finishing, 77–98. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003228776-4.
Повний текст джерелаYang, Shengqiang, and Wenhui Li. "Fluid Magnetic Abrasive Finishing Technology." In Surface Finishing Theory and New Technology, 337–99. Berlin, Heidelberg: Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-662-54133-3_4.
Повний текст джерелаYin, Shao Hui, and Takeo Shinmura. "Vibration-Assisted Magnetic Abrasive Polishing." In Advances in Abrasive Technology IX, 207–12. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-416-2.207.
Повний текст джерелаFang, Jian Cheng, Wen Ji Xu, Z. Y. Zhao, and H. Y. Li. "Electrochemical Magnetic Abrasive Compound Finishing." In Advances in Abrasive Technology VIII, 275–80. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-974-1.275.
Повний текст джерелаZou, Y., and Takeo Shinmura. "Study on Internal Magnetic Field Assisted Finishing Process Using a Magnetic Machining Jig." In Advances in Abrasive Technology VIII, 281–86. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-974-1.281.
Повний текст джерелаSaito, T., K. Koike, H. Yamato, A. Kuwana, A. Suzuki, H. Yamaguchi, and Takeo Shinmura. "Development of Gas-Atomized Magnetic Tools." In Advances in Abrasive Technology VIII, 287–90. Stafa: Trans Tech Publications Ltd., 2005. http://dx.doi.org/10.4028/0-87849-974-1.287.
Повний текст джерелаZhang, Y., Masato Yoshioka, and Shin-ichiro Hira. "Study on Magnetic Barrel Machine Equipped with Three-Dimensional Arrangement of Magnets." In Advances in Abrasive Technology IX, 761–66. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-416-2.761.
Повний текст джерелаТези доповідей конференцій з теми "Magnetic abrasive"
Xiao Zuoyi. "Researching for the unbounded magnetic abrasive application in magnetic abrasive finishing." In International Technology and Innovation Conference 2006 (ITIC 2006). IEE, 2006. http://dx.doi.org/10.1049/cp:20061026.
Повний текст джерелаIkonnikov, A. M. "Analysis of Magnetic Forces in the Working Clearance with Magnetic-Abrasive Treatment of Inductors on Standing Magnets." In Modern Trends in Manufacturing Technologies and Equipment. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901755-31.
Повний текст джерелаRatay, Jason, and Hitomi Yamaguchi. "Characteristics of Diamond Abrasive Used in Magnetic Abrasive Finishing of Nickel-Based Superalloys." In ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8365.
Повний текст джерела"FEM BASED MODELING OF CYLINDRICAL-MAGNETIC ABRASIVE FINISHING (C-MAF) PROCESS USING UNBOUNDED MAGNETIC ABRASIVES." In International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering. ELK ASIA PACIFIC JOURNAL, 2016. http://dx.doi.org/10.16962/elkapj/si.arimpie-2016.32.
Повний текст джерелаTehrani, Alireza Fadaei, Mehrdad Givi, and Ashkan Sepehr Afghan. "Investigation of Magnetic Abrasive Finishing for Internal Polishing of Aluminium Tubes Using DOE." In ASME 2010 International Mechanical Engineering Congress and Exposition. ASMEDC, 2010. http://dx.doi.org/10.1115/imece2010-38811.
Повний текст джерелаKhomich, Mikalai, Vjachaslau Bitkasha, and Kseniya Yurasava. "Magnetic-abrasive polishing: opportunities and prospects." In Sixth European Seminar on Precision Optics Manufacturing, edited by Christian Schopf and Rolf Rascher. SPIE, 2019. http://dx.doi.org/10.1117/12.2528703.
Повний текст джерелаYamaguchi, Hitomi, and Kotaro Hanada. "Development of Spherical Magnetic Abrasive Made by Plasma Spray." In ASME 2007 International Manufacturing Science and Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/msec2007-31191.
Повний текст джерелаJayswal, S. C. "Analysis of magnetic abrasive finishing with slotted magnetic pole." In MATERIALS PROCESSING AND DESIGN: Modeling, Simulation and Applications - NUMIFORM 2004 - Proceedings of the 8th International Conference on Numerical Methods in Industrial Forming Processes. AIP, 2004. http://dx.doi.org/10.1063/1.1766730.
Повний текст джерелаYOSHIOKA, M., S. HIRA, and H. TAKEUCHI. "MOTION OF MAGNETIC BARREL MEDIA IN ROTARY MAGNETIC FIELD." In Proceedings of the Third International Conference on Abrasive Technology (ABTEC '99). WORLD SCIENTIFIC, 1999. http://dx.doi.org/10.1142/9789812817822_0063.
Повний текст джерелаSran, Lakhvir Singh, Sehijpal Singh Khangura, and Amarjit Singh. "Nano Finishing of Brass Tubes by Using Mechanically Alloyed Magnetic Abrasives." In ASME 2012 International Manufacturing Science and Engineering Conference collocated with the 40th North American Manufacturing Research Conference and in participation with the International Conference on Tribology Materials and Processing. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/msec2012-7264.
Повний текст джерела