Дисертації з теми "Macromolecular and materials chemistry"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Macromolecular and materials chemistry".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Zhang, Borui. "Novel Dynamic Materials Tailored by Macromolecular Engineering." Miami University / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=miami1564157701522666.
Повний текст джерелаReinsel, Anna Michele. "Spectroscopic Characterization of Organic and Inorganic Macromolecular Materials." University of Akron / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=akron1312823530.
Повний текст джерелаDe, Alwis Watuthanthrige Nethmi Thanurika. "Application of Photochemistry and Dynamic Chemistry in Designing Materials tuned through Macromolecular Architecture." Miami University / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=miami1626694956739651.
Повний текст джерелаStimson, Lorna M. "Phase behaviour of macromolecular liquid crystalline materials : computational studies at the molecular level." Thesis, Durham University, 2003. http://etheses.dur.ac.uk/3144/.
Повний текст джерелаVan, Schalkwyk Welmarie. "Self-assembly of amphiphilic discotic materials." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/79799.
Повний текст джерелаENGLISH ABSTRACT: The creation of nanometer-scale (nanoscale) materials has fascinated and inspired the scientific community for more than a quarter of a century because of the wide range of applications of these materials, e.g. applications in drug delivery, medicine, tissue engineering, memory storage, display and audio devices, semiconductors, etc. π-Conjugated dendrimers have a proposed flat packing arrangement. An alternating phenyl isoxazole dendrimer system was developed to investigate this phenomenon. The synthesis of this dendritic system was attempted by divergent and convergent approaches. Preparation of the second generation failed because some functional groups inhibited the monomers to react to the first generation. Other examples of nano materials that have attracted a vast amount of interest are the so-called discotic amphiphiles. Discotic amphiphilic molecules have the potential to self-assemble into helical architectures. Discotic systems bearing chiral polar side chains (one and three respectively) were developed. Their self-assembly was investigated in variable concentration and variable solvent composition experiments. These systems did show signs of aggregation in UV-vis and CD spectroscopy experiments. Thread-like helical structures were observed with transmission electron microscopy.
AFRIKAANSE OPSOMMING: Nanometer-skaal materiale inspireer en fassineer wetenskaplikes al vir meer as 25 jaar as gevolg van hulle wye verskeidenheid toepassings bv.: die vervoer van geneesmiddels, weefsel ontwerp, geheue stoorspasie, digitale skerms, klank toerusting, geleiers, ens. π-Gekonjugeerde dendrimere het 'n plat drie dimmensionele rangskikking. 'n Afwisselende feniel isoxazole dendrimer stelsel was ontwikkel om hierdie verskynsel te ondersoek. Die sintese van hierdie dendritiese stelsel is aangepak deur divergerende en konvergerende benaderings. Sintese van die tweede generasie het misluk omdat sommige funksionele groepe die monomere geïnhibeer het om te reageer met die eerste generasie. Ander interessante voorbeelde van nano materiale, is die sogenaamde skyfvormige amphiphiles. Skyfvormige amphiphiles het die potensiaal om spontaan te versamel in heliese strukture. Skyfvormige molekules met chirale polêre sykettings (een en drie onderskeidelik) is ontwikkel. Hulle potensiaal om spontaan te versamel is ondersoek met wisselende konsentrasie en wisselende oplosmiddel samestelling eksperimente. Hierdie stelsels het tekens van versameling gewys in UV-vis en CD-spektroskopiese eksperimente. Staaf-vormige heliese strukture is waargeneem met transmissie-elektronmikroskopie.
Lenart, William R. "EXPANDING EXPERIMENTAL AND ANALYTICAL TECHNIQUES FOR THE CHARACTERIZATION OF MACROMOLECULAR STRUCTURES." Case Western Reserve University School of Graduate Studies / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=case1584358701735061.
Повний текст джерелаWu, Haiyan. "Design and Development of New Chemistry for Biosensing." University of Akron / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=akron1502459975409826.
Повний текст джерелаEhrlich, Deborah J. C. "Synthetic strategies for control of structure from individual macromolecules to nanoscale materials to networks." Thesis, Massachusetts Institute of Technology, 2019. https://hdl.handle.net/1721.1/122451.
Повний текст джерелаCataloged from PDF version of thesis.
Includes bibliographical references.
Chapter 1. Aqueous self-assembly of prodrug macromonomers. A series of highly tunable micelles for drug delivery were made from norbornene based poly(ethylene glycol) macromonomers with covalently linked drugs. A total of five macromonomers were made using three different drugs (telmisartan, paclitaxel, and SN-38) and three different drug loadings. Combinations of these macromonomers were then allowed to self assemble into micellar aggregates. The size, stability, and shape of these micellar aggregates were controlled with the highly versatile structure. Chapter 2. Post micellization modification of norbornene-containing prodrug macromonomers. Highly tunable micelles for drug delivery were functionalized after their selfassembly. Post-micellization inverse electron demand Diels-Alder reactions of norbornenes and tetrazines were used to signal changes in micelle size and stability through the addition of either hydrophilic or hydrophobic tetrazines.
Thiol-ene additions reactions were used to increase micelle size and form chemically crosslinked nanoparticles. These modifications of norbornene-containing prodrug macromonomer assemblies illustrate their versatility. Chapter 3. Synthesis of polymers by iterative exponential growth. A scalable synthetic route that enables absolute control over polymer sequence and structure has remained a key challenge in polymer chemistry. Here, we report an iterative exponential growth plus side-chain functionalization (IEG+) strategy for the production of macromolecules with defined sequence, length, and stereoconfiguration. Each IEG+ cycle begins with the azide opening of an enantiopure epoxide, followed by side chain functionalization, alkyne deprotection, and copper-catalyzed azide-alkyne cycloaddition (CuAAC). These cycles have been conducted to form unimolecular macromolecules with molar masses of over 6,000 g/mol.
Subsequent modifications to IEG+ allow for the functionalization of monomers prior to the IEG+ cycle, expanding the library of compatible side chain chemistries. Chapter 4. Introduction to elastomer toughening strategies. Silicone elastomers are ubiquitous. Here, silicone elastomers are discussed in terms of network structure, the impact of network structure upon physical properties, and modifications of network structure in order to achieve desired physical properties. Fillers, the standard toughening strategy, are discussed in conjunction with entanglement density. Focus is placed on the impact of entanglement density on material properties. Topological networks are discussed and noted for their stress dissipative properties. Chapter 5. Topology modification of polydimethylsiloxane elastomers through loop formation. Topological networks are well known for their stress dissipation through the pulley effect leading to soft, extensible materials.
Combining these properties with a traditionally crosslinked network to produce a hybrid material allows for enhanced extensibility without a loss in modulus. Here, such hybrid networks were made with poly(dimethyl siloxane) polymers of a range of molecular weights. Side-loop polymer brushes were synthesized and then crosslinked to create hybrid networks with the statistical formation of topological bonds. These materials were characterized through tensile testing. Elastomers formed with the same molecular weight polymer in both side-loops and network formation did not show mechanical properties that depended upon the fraction of networks used for brush formation. Elastomers made with long polymers in brush formation and shorter polymers for network formation resulted in highly extensible systems without significant loss in modulus.
by Deborah J.C. Ehrlich.
Ph. D.
Ph.D. Massachusetts Institute of Technology, Department of Chemistry
Etok, S. E. "Structural characterisation and in vitro behaviour of apatite coatings and powders." Thesis, Faculty of Medicine and Biosciences, 2009. http://hdl.handle.net/1826/3973.
Повний текст джерелаEtok, Susan Essien. "Structural characterisation and in vitro behaviour of apatite coatings and powders." Thesis, Cranfield University, 2005. http://dspace.lib.cranfield.ac.uk/handle/1826/3973.
Повний текст джерелаSmall, Aaron Charles. "Novel hybrid materials and their applications : a thesis submitted to the Victoria University of Wellington in fulfilment of the requirements for the degree of Doctor of Philosophy in Chemistry /." RestrictedArchive@Victoria -- VUW staff and students only, 2008. http://restrictedarchive.vuw.ac.nz.helicon.vuw.ac.nz/handle/123456789/1298.
Повний текст джерелаShebani, Anour N. "The effect of wood composition and compatibilisers on polyethylene/wood fibre composites." Thesis, Stellenbosch : University of Stellenbosch, 2010. http://hdl.handle.net/10019.1/5270.
Повний текст джерелаENGLISH ABSTRACT: The effects of the macromolecular composition and content of different wood species on the properties of wood-polymer composites (WPCs) achieved when using poly(vinyl alcohol-co-ethylene) (EVOH) as a compatibiliser and linear low density polyethylene (LLDPE) as a matrix, were investigated. Four wood different species (A. cyclops (acacia), E. grandis (eucalyptus), P. radiata (pine) and Q. alba (oak)) with different macromolecular composition and contents and average particle lengths were used. WPCs filled with these species and WPCs filled with the same species but without extractives were prepared using 10% wood content and different amounts (0, 2, 5, 7 and 10%) of EVOH. An EVOH content of 7% was found to be optimum. Unextracted woods produced WPCs with higher mechanical properties and better resistance to ultraviolet (UV) degradation, while the extracted woods produced WPCs with lower water absorption (WA) rates and better thermal stability. Use of unextracted A. cyclops resulted in composites with superior mechanical and thermal properties compared with the other unextracted species, most probably due to its higher cellulose and lignin contents and a favourable average wood particle length (0.225 mm). A. cyclops composites also had higher WA and thickness swelling (TS) rates most likely due to the greater number of free hydroxyl groups present in these composites because of higher cellulose content. Composites containing wood species with a high lignin and extractive content, such as A. cyclops and Q. alba, exhibited higher resistance to UV degradation. Poly(vinyl alcohol-co-ethylenes) (EVOHs) with different ethylene content (27, 32, 38 and 44%) and A. cyclops with different particle sizes (180, 250 and 450 ìm) were used to prepare WPCs with 10% A. cyclops content. The effect of the contact area between the A. cyclops particles and LLDPE achieved when using EVOHs as compatibilisers on the properties of WPCs was also investigated. The greatest improvements in the mechanical and thermal properties of composites made with A. cyclops with particle size 180 ìm were obtained when EVOH with 44% ethylene content was used. The greatest improvements in the composites made with A. cyclops with particle size 250 ìm were achieved when EVOH with 38% ethylene content was used. Composites made with A. cyclops with particle size 450 ìm exhibited better properties when EVOH with 27% ethylene content was used. All the composites that had better mechanical and thermal properties, also exhibited better compatibility and interface adhesion. Two successful approaches were used to impart more attractive ecological and economical advantages to WPCs. In the first approach, (0, 2, 5 and 7%) degraded LLDPE was used as a compatibiliser in WPCs at levels of 10, 30 and 50% wood content. The resulting mechanical properties, such as tensile strength and hardness, thermal and morphological properties of the compatibilised composites were slightly higher than those of noncompatibilised composites and virgin LLDPE. Elongation at break and impact properties of the compatibilised composites were lower than in virgin LLDPE, but higher than in noncompatibilised composites. In the second approach, polyethylene (PE) and various functionalised polyethylenes (PEs) were synthesised by copolymerising ethylene and 10-undecen-1-ol using a soluble metallocene/methylaluminoxane catalyst at room temperature. The incorporation of functional groups increased with increasing comonomer content. WPCs with 10 and 30% wood content were prepared. The composites prepared with functionalised PEs had better mechanical, thermal and morphogical properties than the composites prepared with PE. Composites made with functionalised PE with higher hydroxyl groups content exhibited better properties than composites made with functionalised PE with lower hydroxyl groups content. Composites with 10% wood content exhibited better properties and performance than composites with 30% wood content.
AFRIKAANSE OPSOMMING: Die gevolg van die makromolekulere samestelling van verskillende houtspesies op die eienskappe van hout-polimeer saamgestelde materiale (HPS) wanneer poli(viniel alcohol-ko-etileen) (EVOH) as versoeningsmiddel gebruik word saam met linieere lae digtheid poli(etileen) (LLDPE) as matriks is ondersoek. Vier houtspesies (A. cyclops (acacia), E. grandis (eucalyptus), P. radiata (pine) and Q. alba (oak)) met verskillende makromolekulere samestelling and partikelgrootte-verspreiding is gebruik in die studie. HPS materiale is berei met hierdie vesels, beide voor en na ekstraksie van die houtpartikels met onderskeidelik warm water en oplosmiddels (alleen en in kombinasie). In hierdie HPS materiale is 10% hout gebruik en 0, 2, 5, 7 en 10% EVOH. 'n EVOH inhoud van 7% is as optimum bepaal. Houtpartikels voor ekstraksie het HPS materiale met beter meganiese eienskappe en beter weerstand teen UV bestraling, terwyle partikels wat ekstraksie ondergaan het HPS materiale met laer water-absorpsie en beter hitte-stabiliteit to gevolg gehad het. Die gebruik van ongeekstraheerde A. cyclops het samegestelde materiale met die beste meganiese en termiese eienskappe tot gevolg gehad in vergelyking met die ander houtspesies (voor ekstraksie), as gevolg van die hoer sellulose en lignien inhoud van die spesie, sowel as 'n voordelige partikelgrootte-verspreiding. A. Cyclops saamgestelde materiale he took hoer waterabsorpsie (WA) en dikte-swelling (DS) tempos gehad, weens die groter hoeveelheid vrye hidroksielgroepe teenwoording in die materiale, direk in verwantskap met die sellulose-inhoud. Saamgestelde materiale met 'n hoe hoevellheid lignien en ekstraheerbare materiale (A. cyclops and Q. alba) het beter weerstand teen UV-degradasie geopenbaar. Verskillende poli(viniel alkohol-ko-etileen) polimere (EVOHs) met wisselende etileen-inhoud (27, 32, 38 en 44%) en A. Cyclops met verskillende partikel-groottes (180, 250 en 250 µm) is gebruik om HPS materiale met 10% hout te vervaardig. Die gevolg van die kontak-area tussen die houtpartikels en die LLDPE wanneer EVOHs as versoeningsmiddel gebruik is, is ook ondersoek. Die beste verbetering in die meganiese en termiese eienskappe van die saamgestelde materiale met A. cyclops met partikel-grootte 180 µm is gekry met EVOH met 44% etileen-inhoud, terwyl die beste resultate met 250 µm partikels verkry is met 'n EVOH met 38% etileen, en met 27% etileen in die geval van die 450 µm partikels. Twee benaderinge om meer aantreklike ekologiese en ekonomiese eienskappe by die HPS materiale te bewerkstellig was suksesvol. In die eerste geval is gedegradeerde LLDPE as versoeningsmiddel gebruik. Die resulterende meganiese eienskappe van die HPS materiale met LLDPE as versoeningsmiddel was beter as die HPS mateirale daarsonder. Samegestelde materiale met 10, 30 en 50% hout is vervaardig. Die trekverlenging by die breekpunt sowel as die impaksterkte van die HPS materiale was laer as LLDPE alleen, maar beter as die nie-versoende HPS materiale. In die tweede benadering is polietileen (PE) en gefunksionaliseerde PE gesintetiseer deur etileen en 10-undekeen-1-ol te koplimeriseer met ‘n oplosbare metalloseen/metiel alumoksaan katalis. Die hoeveelheid funskionele (OH) groepe is verhoog deur toenemend ekomonommer-inhoud. HPS materiale met 10 en 30% hout is vervaardig. Die saamgestelde materiale met funksionele PE het beter maganiese eienskappe gehad as die met gewone PE. Hoe hoër die hidroksielgroep-inhoud, hoe beter die eienskappe van die HPS materiale, terwyl die materiale met 10% hout beter eienskappe openbaar het as materiale met 30% hout.
PATWARDHAN, SIDDHARTH VIJAY. "SILICIFICATION AND BIOSILICIFICATION: THE ROLE OF MACROMOLECULES IN BIOINSPIRED SILICA SYNTHESIS." University of Cincinnati / OhioLINK, 2003. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1054325597.
Повний текст джерелаEndres, Kevin J. "Mass Spectrometry Methods For Macromolecules: Polymer Architectures, Cross-Linking, and Surface Imaging." University of Akron / OhioLINK, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=akron1553096604194835.
Повний текст джерелаRiba, Moliner Marta. "Supramolecular Strategies to Control the Assembly of Organic-Based Materials." Doctoral thesis, Universitat de Barcelona, 2015. http://hdl.handle.net/10803/378647.
Повний текст джерелаHall, P. J. "The macromolecular chemistry of coals." Thesis, University of Newcastle Upon Tyne, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.377435.
Повний текст джерелаCapadona, Jeffrey R. "Surface-directed assembly of fibrillar extracellular matrices." Diss., Available online, Georgia Institute of Technology, 2005, 2005. http://etd.gatech.edu/theses/available/etd-04142005-221724/.
Повний текст джерелаElliot Chaikof, Committee Member ; Loren Williams, Committee Member ; David M. Collard, Committee Chair ; Andres J. Garcia, Committee Chair ; Marcus Weck, Committee Member.
Zhu, Zhixue. "Cyclic oligomers in macromolecular and supramolecular chemistry." Thesis, University of Reading, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.272293.
Повний текст джерелаEden, E. G. "Analysis of solution-phase macromolecular materials by diffusion NMR." Thesis, University of Liverpool, 2017. http://livrepository.liverpool.ac.uk/3006567/.
Повний текст джерелаKuttner, Christian [Verfasser]. "Macromolecular Interphases and Interfaces in Composite Materials / Christian Kuttner." München : Verlag Dr. Hut, 2014. http://d-nb.info/1063222036/34.
Повний текст джерелаPrice, Erik Joshua. "EXTREME-ENVIRONMENT PROTECTION USING MACROMOLECULAR COMPOSITE TECHNOLOGY." Case Western Reserve University School of Graduate Studies / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=case1617027732923331.
Повний текст джерелаAkeroyd, Niels. "Click chemistry for the preparation of advanced macromolecular architectures." Thesis, Stellenbosch : University of Stellenbosch, 2010. http://hdl.handle.net/10019.1/3985.
Повний текст джерелаENGLISH ABSTRACT: Different click chemistry methods have been used together with Reversible Addition- Fragmentation chain Transfer (RAFT) mediated polymerization to synthesize macromolecular architectures. A new leaving group for RAFT was introduced. This triazole leaving group allows for easy conjugation of the RAFT agent to various substrates via the copperI catalyzed Huisgen 1,3-dipolar cycloaddition reaction. Subsequently monomer can be polymerized onto the substrate using the RAFT agent. This connects the polymer to the substrate via a hydrolytically stable 1,2,3-triazole. The Mitsunobu reaction was used to chain-end functionalize polymers. The Mitsunobu reaction allows for the substitution of primary and secondary alcohols with a nucleophile. The modification of polymer chain-ends was done in two ways. Firstly, thiol-functional chain-ends were used as the nucleophile in the Mitsunobu reaction using propargyl alcohol as the alcohol. This yielded alkyne-functional polymers. Thiol chain-end functional polymers were obtained by the aminolysis of polymers synthesized via RAFT. Secondly, alcohol-functional polymers were modified. In the case of poly(vinylpyrrolidone), the RAFT group was hydrolyzed and alcohols were obtained. Hydroxyl functional PEG was obtained commercially. The hydroxyl functionality was reacted in the Mitsunobu reaction using hydrazoic acid (HN3) as the nucleophile. Azide chain end functional polymers were obtained. These alkyne and azide chain end functional polymers were subsequently used in the copperI catalyzed Huisgen 1,3-dipolar cycloaddition reaction. Ultra Fast Hetero Diels-Alder click chemistry (UFHDA) was used to synthesizes norbornenelike structures (substituted 2-thiabicyclo[2.2.1]hept-5-ene moieties). Norbornene-like structures can be polymerized via Ring Opening Metathesis Polymerization (ROMP). Monomers were synthesized using phenethyl(diethoxyphosphoryl)dithioformate and cyclopentadiene. Macromonomers were obtained from the UFHDA of Polystyrene (PSTY) synthesized via RAFT, using phenethyl(diethoxyphosphoryl) dithioformate as the RAFT agent, and cyclopentadiene or cyclopentadienyl-terminated PEG as the dienes. The obtained (macro) monomers were homo- and copolymerized using Ring Opening Metathesis Polymerization (ROMP). For the ROMP, four different Grubbs type catalysts were tested.The ring-strain promoted Huisgen 1,3-dipolar cycloaddition reaction uses cyclooctynes as the alkyne. The ring-strain in this molecule allows for a fast reaction at room temperature. This reaction is potentially very interesting for biological applications because it doesn’t require the toxic copper catalyst. In this work three routes towards cyclooctynes are investigated. PEG was chain end functionalized with the obtained cyclooctyne derivatives. Overall, click chemistry methodologies were applied to synthesize different macromolecular architectures. Results include a new type of RAFT agent that allows for easy conjugation to substrates, reaction methods for chain end modification of polymers, and the synthesis of new monomers and polymers.
AFRIKAANSE OPSOMMING: Verskillende kliek chemie metodes, tesame met Omkeerbare Addisie Fragmentasie ketting Oordrag beheerde polimerisasie (OAFO), is gebruik vir die sintese van makromolekulêre argitekture. ʼn Nuwe verlatende groep vir OAFO was bekend gestel. Die triazool verlatende groep bied die moontlikheid vir gemaklike koppeling van die OAFO agente met ‘n verskeidenheid van substrate via die koperI gekataliseerde Huisgen 1,3-dipolêre siklo-addisie reaksie. Gevolglik kan monomere gepolimeriseer word op die substraat deur middel van die OAFO agent. Dit laat toe vir die koppeling van die polimeer op die substraat via a hidrolitiese stabiele 1,2,3-triazool. Die Mitsunobu reaksie was gebruik vir die funksionaliseering van die end groepe van die polimeer ketting. Die Mitsunobu reaksie laat toe vir die substitusie van primêre en sekondêre alkohole met ‘n nukleofiel. Die verandering van die polimeer ketting end groepe was uitgevoer op twee verskillende maniere. Eerstens is ketting end groepe met ‘n tiol funktionaliteit gebruik as a nukleofiel in die Mitsunobu reaksie deur gebruik te maak van propargiel alkohol as die alkohol. Dit het alkyn funktionele polimere opgelewer. Tiol ketting end funktionele polimere was verkry deur middel van aminolise van die polimere gesintetiseer via OAFA. Tweedens is alkohol funktionele polimere gemodifiseer. In die geval van poli(N-vinielpirolidoon) is die OAFA grope gehidroliseer en gevolglik is alkohole verkry op hierdie manier. Kommersiële funksionele PEG was gebruik. Die hidroksie funksionele groep was gereageer in die Mitsunobu reaksie deur gebruik te maak van waterstof asied (HN3) as die nukleofiel. Dit het asied funksionele ketting eindes opgelewer. Die alkyne en asied ketting end funksionele polimere was gevolglik gebruik in die koperI gekataliseerde Huisgen 1,3- dipolêre siklo-addisie reaksie. Ultra Vinnige Hetero Diels-Alder kliek chemie (UVHDA) was gebruik vir die sintese van norborneen agtige strukture (gesubstitueerde 2-tiabisiklo[2.2.1]hept-5-een groepe). Monomere was gesintetiseer deur gebruik te maak van fenieletiel(di-etoksifosforiel)di-tioformaat en siklopentadiëen of siklopentadiëen-getermineerde PEG. Die sintese van makromonomere is verkry via UVHDA deur gebruik te maak van polistireen, gesintetiseer deur middel van OAFO (waar fenieletiel(dietoksifosforiel) di-tioformaat gebruik is as OAFO agent), en siklopentadiëen of siklopentadiëengetermineerde PEG. Die makromonomere wat verkry is, is verder gebruik vir homo- en kopolimerisasie deur middel van Ring Opening Metatesis Polimerisasie, ROMP. Vir die ROMP is vier verskillende Grubbs tipe kataliste gebruik. Die ring-spanning bevorderde die Huisgen 1,3,-dipolêre siklo-addissie reaksie waar siklooketyne gebruik is as die alkyne. Die ring-spanning in die molekule laat toe vir vinninge reaksies by kamer temperatuur. Die reaksie het die potensiaal vir interessante biologiese toepassings aangesien dit nie ’n kopper katalis vereis nie wat toksies van aard is. In die studie word drie roetes ten einde to siko-oktyn ondersoek. PEG was geketting end gefunksionaliseerd met die gevolgde siko-oktyne afgeleides. Verskillende kliek chemie metodologiëe was toegepas vir die sintese van verskillende makromolekulêre argitekture. Resultate sluit in een nuwe tipe OAFO agent wat maklike konjugasie met substrate bewerkstellig, ketting einde modifikasie van polimere, nuwe monomere en polimere wat gesintetiseer is.
Barker, Philip. "The introduction of supramolecular architectures into macromolecular arrays." Thesis, University of Warwick, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250967.
Повний текст джерелаWithe, D. "Some studies of macromolecular initiators of vinyl polmerisation." Thesis, University of Liverpool, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.370867.
Повний текст джерелаHansell, Claire F. "Tetrazine-norbornene cycloadditions in macromolecular synthesis and functionalisation." Thesis, University of Warwick, 2013. http://wrap.warwick.ac.uk/58244/.
Повний текст джерелаBecerril-Garcia, Hector Alejandro. "DNA-Templated Nanomaterials." Diss., CLICK HERE for online access, 2007. http://contentdm.lib.byu.edu/ETD/image/etd1823.pdf.
Повний текст джерелаCarlmark, Anna. "Complex Macromolecular Architectures by Atom Transfer Radical Polymerization." Doctoral thesis, KTH, Fibre and Polymer Technology, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3740.
Повний текст джерелаControlled radical polymerization has proven to be a viableroute to obtain polymers with narrow polydispersities (PDI's)and controlled molecular weights under simple reactionconditions. It also offers control over the chain-]ends of thesynthesized polymer. Atom transfer radical polymerization(ATRP) is the most studied and utilized of these techniques. Inthis study ATRP has been utilized as a tool to obtain differentcomplex macromolecular structures.
In order to elaborate a system for which a multitude ofchains can polymerize in a controlled manner and in closeproximity to one another, a multifunctional initiator based onpoly(3-ethyl-3-(hydroxymethyl)oxetane was synthesized. Themacroinitiator was used to initiate ATRP of methyl acrylate(MA). The resulting dendritic-]linear copolymer hybrids hadcontrolled molecular weights and low PDI's. Essentially thesame system was used for the grafting of MA from a solidsubstrate, cellulose. A filter paper was used as cellulosesubstrate and the hydroxyl groups on the cellulose weremodified into bromo-]ester groups, known to initiate ATRP.Subsequent grafting of MA by ATRP on the cellulose made thesurface hydrophobic. The amount of polymer that was attached tothe cellulose could be tailored. In order to control that thesurface polymerization was -eliving-f and hence that thechain-]end functionality was intact, a second layer of ahydrophilic monomer, 2-hydroxyethyl methacrylate, was graftedonto the PMA- grafted cellulose. This dramatically changed thehydrophilicity of the cellulose.
Dendronized polymers of generation one, two and three weresynthesized by ATRP of acrylic macromonomers based on2,2-bis(hydroxymethyl)propionic acid. In the macromonomerroute, macromonomers of each generation were polymerized byATRP. The polymerizations resulted in polymers with low PDI's.The kinetics of the reactions were investigated, and thepolymerizations followed first-order kinetics when ethyl2-bromopropionate was used as the initiator. In the-egraft-]onto-f route dendrons were divergently attached to adendronized polymer of generation one, that had been obtainedby ATRP.
Van, De Walle Matthias. "Continuous photoflow for macromolecular design." Thesis, Queensland University of Technology, 2021. https://eprints.qut.edu.au/208293/1/Matthias_Van%20De%20Walle_Thesis.pdf.
Повний текст джерелаOguzkaya, Funda. "Synthesis Of Macromolecular Catalyst Systems And Applications." Phd thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613565/index.pdf.
Повний текст джерелаGreen Chemistry"
with including no metallic ions and have also the ability of reusability. Hence, nitroxide chemistry was chosen as the key point. Catalysts were synthesized with surely including TEMPO as the functional part as the most preferable nitroxide derivative. As a skeleton, norbornene was chosen firstly. Following obtaining 3-(methoxycarbonyl) bicyclo[2.2.1]hept-5-ene-2-carboxylic acid (49), 4-aminoTEMPO was attempted to be inserted in the structure. In this case, 4-aminoTEMPO was preferred as a TEMPO derivative so as to include reactive amine functional group. As a result, two different monomers were obtained. Then, Ring Opening Metathesis Polymerization via first generation Grubbs catalyst was adjusted to reach target macromolecules. Furthermore, as a second type skeleton for the catalyst, Thiophene-Pyrrole-Thiophene (SNS) structure was chosen, since these well-known structures have the ability to polymerize easily. Anelli Oxidation protocol including corresponding catalysts in combination with NaOCl+NaHCO3 (pH 9.1) and KBr resulting in remarkable high activity with low catalyst concentrations typically 1 mol % was chosen for the oxidation of alcohols so as to reach to target aldehydes and ketones. Investigation of other applicable areas via collaborative studies was thought to open the way of electrochromic and biosensor studies as the different points of view. Electropolymerization was performed in a three-electrode cell consisting of an Indium Tin Oxide coated glass slide (ITO) as the working electrode, platinum wire as the counter electrode and Ag wire as the pseudo reference electrode. As the biosensor part, glucose oxidase (GOx) was used as the model enzyme for glucose oxidation in the presence of molecular oxygen. Poly-SNS-based carboxylic acid served as an excellent immobilization matrix for glucose sensing. Key words: TEMPO, Anelli Oxidation
Mohin, Jacob W. "Nanostructured π-Electron Materials for Energy Applications Derived from Macromolecular Self-Assembly". Research Showcase @ CMU, 2015. http://repository.cmu.edu/dissertations/1045.
Повний текст джерелаWiltshire, James Thomas. "Design and synthesis of star macromolecular architectures with degradable functionality /." Connect to thesis, 2007. http://eprints.unimelb.edu.au/archive/00004014.
Повний текст джерелаShreif, Zeina. "Multiscale theory of nanosystems applications to self-assembly, macromolecular dynamics, and nanomedicine /." [Bloomington, Ind.] : Indiana University, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3330802.
Повний текст джерелаTitle from PDF t.p. (viewed Jul 23, 2009). Source: Dissertation Abstracts International, Volume: 69-10, Section: B, page: 6130. Adviser: Peter Ortoleva.
San, Juan Ocete Alexis. "Nuevos materiales macromoleculares formados por la unión de moléculas con estado birradical triplete asequible térmicamente." Doctoral thesis, Universitat de Barcelona, 2018. http://hdl.handle.net/10803/587192.
Повний текст джерелаStudies carried out previously by our research group show that there are heterocyclic organic molecules, seemingly closed layers and without any metal atom, presenting thermally affordable triplet biradical character. The formation of these biradical species comes from an imine double bond break by simple conformational changes of this bond. A stabilization factor of the biradical formed is to be included in an electron acceptor part (e.g. acridine) and another electron donor part (e.g. benzothiazole), with the consequent relocation of the unpaired electrons independently in each of such parts. In addition, if the studied molecules contain acidic protons, the formation of the corresponding conjugated base make increase significantly the population of molecules in a triplet biradical state, due to the negative charge generated, that stabilizes better the unpaired electrons. More than 50 compounds have been synthesized and have shown the studied feature, being able to get a general molecular model for all of them. Bibliographic search have also shown that there are natural products which include this model in its structure, and for this reason, paramagnetic response (EPR). These biomolecules are Dasatinib and its analogues, and p-HBDI, chromophore of green fluorescent protein (GFP), being the last one included in this Thesis in order to give validity to the model made up of molecules previously studied. Firstly, our molecules have been functionalized properly to be united on the different polymeric supports. Then, the work has consisted of getting macromolecular materials formed by these molecules to see how affects the property when these molecules are in a polymeric environment. To do this simpler, analog auxiliary models of macromolecular systems have been synthesized and have been used as a guide, for its both synthesis and characterization. Polymers with different structures have been used by the possible influence on the formation of biradical species. The union of these molecules have been carried out on polyacrylic acid (PAA), polyethyleneimine branched (PEI), the (aminomethyl) cross-linked polystyrene as well as dendrimeric structures, focusing, exclusively, in obtaining polymeric analogues of the p- HBDI and its derivatives. For the study of these products have been carried out using the Electron Paramagnetic Resonance (EPR), comparing the macromolecular systems obtained with their low molecular weight precursors. Furthermore, other systems with possible poliradical states as dimers and tetramers have been proposed.
Shell, Elizabeth. "Chemical Unfolding and Macromolecular Crowding of Alpha-1-Acid Glycoprotein." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1115047649.
Повний текст джерелаHarling, Michael G. W. "The synthesis of poly-#beta#-ketides and their application to rigid macromolecular systems." Thesis, University of Reading, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.317649.
Повний текст джерелаMénard, Amélie. "P450 enzymes in biocatalysis: exploration of chemical auxiliaries, macromolecular crowding, bioconjugation and oriented-immobilization." Thesis, McGill University, 2013. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=114213.
Повний текст джерелаLes enzymes cytochrome P450 (CYPs ou P450) forment une famille omniprésente de mono-oxygénases possédant un noyau hème au site-actif. Ces enzymes sont surtout connues pour leur rôle dans le métabolisme de produits pharmaceutiques et pour leur capacité remarquable à oxyder les liens C-H non-activés de façon régio- et stéréosélective. Malheureusement, notre capacité d'étudier et d'utiliser ces enzymes comme biocatalyseurs in vitro est limitée par leur faible activité, instabilité et une incapacité des connaissances actuelles à prédire leurs produits.Dans le chapitre 2, nous démontrons l'utilité des ligands de type II comme auxiliaires chimiques pour la biocatalyse avec CYP2E1 humaine. Nous démontrons que l'auxiliaire chimique nicotinate, lorsque lié à une variété d'hydrocarbures courts, peux promouvoir leur oxydation avec une régiosélectivité prévisible pour le lien C-H secondaire aliphatique ou alcényle le plus éloigné de l'auxiliaire. L'origine de cette sélectivité a été rationalisée à l'aide de «docking» moléculaire de nos composés auxiliaire-substrats à l'intérieure de structures cristallines de CYP2E1 publiées par d'autres chercheurs. L'utilité d'auxiliaires chimiques pour contrôler la régiosélectivité des enzymes P450 avait déjà été démontrée par notre groupe de recherche. Les résultats présentés dans ce chapitre offrent non seulement une confirmation du potentiel de cette stratégie, mais aussi un système complémentaire pour l'oxydation prévisible de liens C-H non-activés par les enzymes P450. Ces résultats confirment également la généralité de l'approche mis au point dans notre laboratoire qui décrit l'utilisation d'une auxiliaire chimique pour diriger l'oxydation prévisible de liens C-H non-activés par les enzymes P450.Une étude des effets de l'encombrement macromoléculaire sur l'activité enzymatique des CYP3A4 et CYP2D6 humaines est présentée dans le chapitre 3. Nous avons trouvé que leur activité demeure inchangée par la présence de certains agents encombrants alors que d'autres ont un effet négatif. De plus, certaines conditions (testées initialement comme contrôle) qui améliorent l'activité enzymatique ont été découvertes.Dans le chapitre 4, l'immobilisation orienté non-covalente de CYP3A4 par son étiquette de type his-tag C-terminale est décrite. Nous démontrons que son immobilisation sur une résine Ni-NTA à base d'agarose via cette stratégie n'a aucun effet négatif sur l'activité ou la stabilité de l'enzyme. Les propriétés lyoprotectrices de cette résine ont aussi été investiguées.Dans le chapitre 5, nous concevons et caractérisons un mutant actif de CYP3A4 lors de modifications avec une variété de maléimides fluorescentes à l'endroit d'un unique résidu cystéinique à sa surface, soit le C64. Nous démontrons aussi que ce mutant préserve son activité lorsqu'immobilisé sur des supports solides par ce même résidu cystéinique. Finalement, les résultats d'études préliminaires sont présentés qui envisagent l'application de cette stratégie d'immobilisation envers des études éventuelles de spectroscopie de fluorescence à la résolution d'une seule molécule.
Zang, Xu. "Encapsulation of Proteinaceous materials in Macromolecular Organic Matter as a mechanism for environmental preservation /." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486400446370061.
Повний текст джерелаGoldmann, Anja Sabrina. "Click chemistry as efficient ligation strategy for complex macromolecular architecture and surface engineering." kostenfrei, 2009. http://opus.ub.uni-bayreuth.de/volltexte/2010/679/.
Повний текст джерелаNormand, Mickaël. "Group 13 organometallic chemistry and macromolecular catalytic engineering for polymers issued from bioresources." Rennes 1, 2012. http://www.theses.fr/2012REN1S091.
Повний текст джерелаLe poly(acide lactique) (PLA) est un polymère biocompatible et biodégradable dont les applications sont très diverses et qui est principalement produit par polymérisation par ouverture de cycle (ROP) du lactide (LA). Un grand nombre de catalyseurs/initiateurs particulièrement efficaces ont été synthétisés au cours des trente dernières années, tels que les dérivés alcoxy d'aluminium, de zinc et de métaux des terres rares. Par exemple, les catalyseurs/initiateurs à base d'aluminium furent largement exploités pour la ROP du lactide racémique (rac-LA) pour conduite à de remarquables contrôles des masses moléculaires et des distributions de masses ainsi qu'à un bon contrôle de la stéréochimie du polymère final. Encore aujourd'hui, en raison de voies de synthèses chimiques très spécifiques, les exemples de ROP du lactide impliquant des catalyseurs/initiateurs à base d'indium restent rares. Ainsi, nous reportons dans ce manuscrit de thèse cinq principaux chapitres traitant des sujets suivants : i) synthèse de nouveaux complexes d'indium supportés par des ligands dialcoxy-diimino fluorés de type hémi-salen and leur utilisation en ROP du rac-LA ; ii) préparation de nouveaux complexes {phenoxy-imine} d'aluminium et d'indium et leur propriétés catalytiques en ROP immortelle du lactide ; iii) synthèse de complexes bimétalliques d'aluminum et d'indium supportés par des ligands bis(phenoxy-imine) et leur utilisation en ROP du rac-LA ; iv) processus de réduction de type Meerwein-Pondorf-Verley dans des complexes isopropylate imino-phenolate d'aluminum et d'indium ; v) synthèse de polyesters centrés sur la béta-cyclodextrine par ROP contrôlée d'esters et de carbonate cycliques
Stark, Andreas. "Advancement and optimization of an electrospray injection based in-vacuum patterning system for macromolecular materials." [Tampa, Fla] : University of South Florida, 2008. http://purl.fcla.edu/usf/dc/et/SFE0002534.
Повний текст джерелаSu, Hao. "Macromolecular Structure Evolution of Giant Molecules Via "Click" Chemistry: Asymmetric Giant Gemini Surfactants Based on Polyhedral Oligomeric Silsesquioxane." University of Akron / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=akron1398727473.
Повний текст джерелаO'Brien, Stephen. "The chemistry of mesoporous materials." Thesis, University of Oxford, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390532.
Повний текст джерелаPatel, Harish M. "Biomimetic templating in materials chemistry." Thesis, University of Bath, 1998. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.390225.
Повний текст джерелаNarayan, Urja Vidya. "Synthesis and characterization of phosphorous containing macromolecular polyether compounds." Scholarly Commons, 2006. https://scholarlycommons.pacific.edu/uop_etds/640.
Повний текст джерелаGossett, John Jared. "Analysis of macromolecular structure through experiment and computation." Diss., Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/51925.
Повний текст джерелаLivshits, Maksim Y. "Fundamental Investigation of PhotoActive Materials From Small Molecules to Materials." Ohio University / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1490713190973503.
Повний текст джерелаAcosta, Sullcahuamán Julio Arnaldo. "Fractura de materiales poliméricos a altas velocidades de solicitación." Doctoral thesis, Universitat Politècnica de Catalunya, 2001. http://hdl.handle.net/10803/6034.
Повний текст джерелаComo resultado y según la orientación del objetivo de la Tesis, se proponen dos metodologías de ensayo de impacto de baja energía: flexión por impacto de baja energía e indentación por impacto. Asimismo, cada metodología incluye el diseño de un "modelo" que permite una aproximación al fenómeno de impacto de baja energía en las geometrías de flexión e indentación respectivamente.
Se ha verificado la validez de los mencionados modelos en el estudio del comportamiento mecánico del polimetilmetacrilato, poliestireno y compuestos de poliestireno y microesferas de vidrio. Las técnicas de impacto de baja energía aplicadas según las metodologías de ensayo propuestas fueron apropiadas y permitieron evaluar la respuesta de estos materiales en el campo elástico, determinar sus características elásticas a elevadas velocidades, así como estimar el inicio del daño en los mismos. Los resultados de estos ensayos, tanto el módulo elástico como las tensiones a las cuales comienzan los fenómenos de emblanquecimiento, crazing y rotura, fueron interpretados según los modelos propuestos. Finalmente, por extensión, las metodologías y modelos propuestos son válidos y apropiados para el estudio de los plásticos, cuando menos similares a los estudiados.
Este trabajo se ha estructurado en concordancia con la metodología utilizada en la investigación correspondiente. Así, en el primer capítulo se ha hecho una revisión sobre los temas afines a la tesis, desde sus aspectos conceptuales hasta los más avanzados; para examinar la evolución y el estado actual del tema en cuestión y precisar los conocimientos que sirvan de base a esta investigación. En el segundo capítulo se describen las características generales y particulares de los materiales sometidos a estudio experimental. En el tercer capítulo se exponen los métodos de ensayo utilizados y las herramientas experimentales necesarias para su realización.
Finalmente, antes de exponer las conclusiones, fue de rigor abordar un cuarto capítulo referido a la flexión por impacto de baja energía y otro quinto capítulo similar que versa sobre la indentación por impacto, para la presentación, interpretación y análisis de resultados, así como la correspondiente discusión.
This work is situated in a perspective highlighted by two inputs of inspiration and exigency, that complement each other: the first input is related with the technology field, and the second comes from a scientific field. On one hand, it is known that plastic products and composites of polymeric matrix are used increasingly in the engineering industry, and as many of the materials used in this field, they are usually exposed to dynamic charges.
Therefore, it is necessary the study of their properties like the development of methods and tests to be able to characterize them under different conditions of charge applications, being of special interest to know the results at high speeds. On the other hand, from the material science point of view, the relation between the structure and the behavior of fracture of the polymers is one of the most important subjects, in which the impact tests play a fundamental role. The knowledge of fracture behavior, in terms of science of the materials, requires a group of additional techniques in order to supply (theoretically and experimentally) the basic impact test methods specified by the normalization entities. In this sense, the principal objective of this thesis is the design and development of test techniques for the study of the fracture of polymers at high speeds of solicitation and in the domain of low energy.
As a result and based in the objective of this thesis, it is proposed two methods of test for impact of low energy: flexion by impact of low energy and indentation by impact. In the same way, every methodology includes the design of a "model" that allows an approximation for the phenomenon of impact of low energy in the geometric of flexion and indentation, respectively. The validity of the models mentioned above in the study of the mechanic behavior of the polymethylmetacrilate, polystyrene and polystyrene filled with different percentages of glass beads has been verified. The techniques for impact of low energy applied according to the methodology of proposed test were appropriate and allowed to evaluate the response of these materials in the elastic field, to determine its elastic characteristics at high speeds, and to estimate the initial damage of components. The results of these tests, likewise the elastic module and the tensions at which begin the whitening phenomena, crazing and rupture, where interpreted according to the proposed models.
Finally, per extension, the methodology and proposed methods are valid and appropriate for the study of plastics, at least similar to the ones studied.
This work has been structured in accordance with the methodology utilized in the correspondent investigation. Thus, in the first chapter, a revision of the subjects corresponding to the thesis were made, from its conceptual aspects to the more advanced, in order to examine the evolution and estate of the actual subject in question and precise the knowledge that can be use as a base for this investigation. In the second chapter, the general and particular characteristics of the materials submitted to the experimental studies are described. In the third chapter the methods of test utilized and the necessary experimental tools for its realization are exposed.
Finally, before the conclusions are presented, it was consistent to add a fourth chapter that refers to the flexion by impact, and another fifth chapter similar that contains the indentation by impact for the presentation, interpretation and analysis of results, and the related discussion.
Thomas, Paul Matthew. "Structural chemistry of organically templated materials." Thesis, University of Oxford, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.670194.
Повний текст джерелаStrange, Gregory Alan. "RESPONSIVE MATERIALS VIA DIELS-ALDER CHEMISTRY." DigitalCommons@CalPoly, 2012. https://digitalcommons.calpoly.edu/theses/710.
Повний текст джерелаBengtsson, Jonas. "POLYMERIZATION OF δ-VALERO LACTONE BY NOVEL CYCLODEXTRIN DIMER". Thesis, KTH, Skolan för kemivetenskap (CHE), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-156213.
Повний текст джерела