Добірка наукової літератури з теми "Machining chip"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Machining chip".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Machining chip"
Anicic, Obrad, Srdjan Jovic, Srdan Tasic, Aleksa Vulovic, and Milivoje Jovanovic. "Temperature detection in cutting zone for different forms of chip shapes during machining process." Sensor Review 38, no. 1 (January 15, 2018): 102–5. http://dx.doi.org/10.1108/sr-07-2017-0141.
Повний текст джерелаFang, Ning. "A Quantitative Sensitivity Analysis of Cutting Performances in Orthogonal Machining with Restricted Contact and Flat-Faced Tools." Journal of Manufacturing Science and Engineering 126, no. 2 (May 1, 2004): 408–11. http://dx.doi.org/10.1115/1.1643081.
Повний текст джерелаKouril, M. "Chip machining of cemented carbides." Metal Powder Report 53, no. 7-8 (July 1998): 44. http://dx.doi.org/10.1016/s0026-0657(98)85115-1.
Повний текст джерелаManyindo, B. M., and P. L. B. Oxley. "Modelling the Catastrophic Shear Type of Chip When Machining Stainless Steel." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 200, no. 5 (September 1986): 349–58. http://dx.doi.org/10.1243/pime_proc_1986_200_138_02.
Повний текст джерелаRuan, Jing Kui, Ying Lin Ke, and Yong Yang. "The Finite Element Analysis of Serrated Chip Formation in High-Speed Cutting Auto Panel Dies." Materials Science Forum 575-578 (April 2008): 293–98. http://dx.doi.org/10.4028/www.scientific.net/msf.575-578.293.
Повний текст джерелаAnicic, Obrad, Srdjan Jovic, Ivica Camagic, Mladen Radojkovic, and Nenad Stanojevic. "Measuring of cutting forces and chip shapes based on different machining parameters." Sensor Review 38, no. 3 (June 18, 2018): 387–90. http://dx.doi.org/10.1108/sr-08-2017-0169.
Повний текст джерелаMann, James B., Yang Guo, Christopher Saldana, Ho Yeung, W. Dale Compton, and Srinivasan Chandrasekar. "Modulation-Assisted Machining: A New Paradigm in Material Removal Processes." Advanced Materials Research 223 (April 2011): 514–22. http://dx.doi.org/10.4028/www.scientific.net/amr.223.514.
Повний текст джерелаJovic, Srdjan, Dragan Lazarevic, and Aleksa Vulovic. "Analyzing of the sensitivity of chip formation during machining process." Sensor Review 37, no. 4 (September 18, 2017): 448–50. http://dx.doi.org/10.1108/sr-06-2017-0120.
Повний текст джерелаRahman, M. Azizur, Md Shahnewaz Bhuiyan, Sourav Sharma, Mohammad Saeed Kamal, M. M. Musabbir Imtiaz, Abdullah Alfaify, Trung-Thanh Nguyen, et al. "Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy." Metals 11, no. 1 (January 16, 2021): 159. http://dx.doi.org/10.3390/met11010159.
Повний текст джерелаTang, Zhi An, Chang Yi Liu, and Jun Jie Yi. "Finite Element Simulation of Ultrasonic Vibration Orthogonal Cutting of Ti6Al4V." Advanced Materials Research 97-101 (March 2010): 1933–36. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.1933.
Повний текст джерелаДисертації з теми "Machining chip"
Hagiwara, Masaya. "OPTIMIZATION OF MACHINING PERFORMANCE IN CONTOUR FINISH TURNING OPERATIONS." UKnowledge, 2005. http://uknowledge.uky.edu/gradschool_theses/341.
Повний текст джерелаMahdi, Wathik Issa. "Tool contact stresses and chip formation in metal machining." Thesis, University of Bradford, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.254204.
Повний текст джерелаOlajire, Kabiru Ayinde. "Machining of aerospace steel alloys with coated carbides." Thesis, Coventry University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301195.
Повний текст джерелаAvanessian, Alfred. "An analysis of the effect of 3-D groove insert design on chip breaking chart." Link to electronic thesis, 2005. http://www.wpi.edu/Pubs/ETD/Available/etd-01255-110749/.
Повний текст джерелаZhou, Li. "Machining chip-breaking prediction with grooved inserts in steel turning." Link to electronic thesis, 2002. http://www.wpi.edu/Pubs/ETD/Available/etd-0109102-140803.
Повний текст джерелаZhou, Li. "Machining chip breaking prediction with grooved inserts in steel turning." Link to electronic thesis, 2001. http://www.wpi.edu/Pubs/ETD/Available/etd-0109102-140803.
Повний текст джерелаBrown, Charles Jeremy. "An investigation of tool stresses caused by unsteady chip formations in machining." Thesis, Queen's University Belfast, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.236295.
Повний текст джерелаKishawy, Hossam Eldeen A. "Chip formation and surface integrity in high speed machining of hardened steel /." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0003/NQ42858.pdf.
Повний текст джерелаKhatri, Ashutosh Mahesh. "INVESTIGATING TOOL WEAR MECHANISM AND MICROSTRUCTURALCHANGES FOR CONVENTIONAL AND SUSTAINABLE MACHINING OFTITANIUM ALLOY." Miami University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=miami1533287855502478.
Повний текст джерелаVenkatachalam, Sivaramakrishnan. "Predictive Modeling for Ductile Machining of Brittle Materials." Diss., Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19774.
Повний текст джерелаКниги з теми "Machining chip"
Słodki, Bogdan. Fizyczne i technologiczne aspekty zwijania i łamania wióra w obróbce superstopów na bazie niklu: Physical and technological aspects concerning chip curl and breaking in nickel based superalloys machining = Physische und technologische Aspekten von der Spanwicklung und dem Spanbrechen bei dem Zerspanen von Superlegierungen auf dem Nickelbasis. Kraków: Wydawnictwo PK, 2012.
Знайти повний текст джерелаBrown, Charles Jeremy. An investigation of tool stresses caused by unsteady chip formations in machining. 1986.
Знайти повний текст джерелаXie, Qufei. An analytical study and finite element modeling of chip formation in metal machining process. 1993.
Знайти повний текст джерелаЧастини книг з теми "Machining chip"
Sheikh-Ahmad, Jamal Y. "Mechanics of Chip Formation." In Machining of Polymer Composites, 63–110. Boston, MA: Springer US, 2009. http://dx.doi.org/10.1007/978-0-387-68619-6_3.
Повний текст джерелаHuda, Zainul. "Mechanics of Chip Formation." In Machining Processes and Machines, 11–26. First edition. | Boca Raton : CRC Press, 2020.: CRC Press, 2020. http://dx.doi.org/10.1201/9781003081203-3.
Повний текст джерелаTschätsch, Heinz, and Anette Reichelt. "Metal removal rate and chip volume ratio." In Applied Machining Technology, 39–41. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-01007-1_5.
Повний текст джерелаGrzesik, Wit. "Mechanics of Cutting and Chip Formation." In Machining of Hard Materials, 87–114. London: Springer London, 2011. http://dx.doi.org/10.1007/978-1-84996-450-0_3.
Повний текст джерелаvon Turkovich, B. F. "Cutting Theory and Chip Morphology." In Handbook of High-Speed Machining Technology, 27–47. Boston, MA: Springer US, 1985. http://dx.doi.org/10.1007/978-1-4684-6421-4_2.
Повний текст джерелаJackson, Mark J., M. D. Whitfield, G. M. Robinson, R. G. Handy, Jonathan S. Morrell, W. Ahmed, and H. Sein. "Analysis of Contact of Chip and Tool Using Nanostructured Coated Cutting Tools." In Machining with Nanomaterials, 155–75. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19009-9_6.
Повний текст джерелаDavies, M. A., T. J. Burns, and C. J. Evans. "The Dynamics of Chip Formation in Machining." In IUTAM Symposium on New Applications of Nonlinear and Chaotic Dynamics in Mechanics, 183–92. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-5320-1_20.
Повний текст джерелаShin, Yung C., and Chinmaya Dandekar. "Mechanics and Modeling of Chip Formation in Machining of MMC." In Machining of Metal Matrix Composites, 1–49. London: Springer London, 2011. http://dx.doi.org/10.1007/978-0-85729-938-3_1.
Повний текст джерелаXu, H. H., Xiang Feng Li, Dun Wen Zuo, and Min Wang. "Double-CCD Stereoscopic Vision System Monitoring Chip Shape." In Advances in Machining & Manufacturing Technology VIII, 66–70. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/0-87849-999-7.66.
Повний текст джерелаViswanathan, Koushik, Anirudh Udupa, Dinakar Sagapuram, and James B. Mann. "What Do Chip Morphologies Tell Us About the Cutting Process?" In Advances in Forming, Machining and Automation, 349–59. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9417-2_28.
Повний текст джерелаТези доповідей конференцій з теми "Machining chip"
Berglind, Luke, and John Ziegert. "Chip Breaking Parameter Selection for Constant Surface Speed Machining." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63531.
Повний текст джерелаSwaminathan, Srinivasan, M. Ravi Shankar, Balkrishna C. Rao, Travis L. Brown, Srinivasan Chandrasekar, W. Dale Compton, Alexander H. King, and Kevin P. Trumble. "Nanostructured Materials by Machining." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-81242.
Повний текст джерелаKishawy, Hossam A., and Mohamed A. Elbestawi. "Effect of Process Parameters on Chip Morphology When Machining Hardened Steel." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1130.
Повний текст джерелаMann, J. B., M. Saei, A. Udupa, B. Stiven Puentes-Rodriguez, and D. Sagapuram. "Applications of Machining in Materials Manufacturing." In ASME 2020 15th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/msec2020-8491.
Повний текст джерелаAvanessian, A., Y. Rong, and G. Tan. "An Improved Model of Machining Chip Breaking Limits for Smart Machining Process Design." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-79378.
Повний текст джерелаDavis, Brian, David Dabrow, Licheng Ju, Anhai Li, Chengying Xu, and Yong Huang. "Study of Chip Morphology and Chip Formation Mechanism During Machining of Magnesium-Based Metal Matrix Composites." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-3052.
Повний текст джерелаNg, Eu-gene, Tahany I. El-Wardany, Mihaela Dumitrescu, and Mohamed A. Elbestawi. "3D Finite Element Analysis for the High Speed Machining of Hardened Steel." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33633.
Повний текст джерелаFang, Ning. "Computer Simulation of Three-Dimensional Chip Kinematics in Machining." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-39110.
Повний текст джерелаYeung, Ho, Yang Guo, Narayan K. Sundaram, James B. Mann, W. Dale Compton, and Srinivasan Chandrasekar. "Mechanics of Modulation Assisted Machining." In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/msec2013-1068.
Повний текст джерелаChandra, Abhijit, Pavan Karra, Adam Bragg, Jie Wang, and Gap Yong Kim. "Chip Segmentation in Machining: A Study of Deformation Localization Characteristics in Ti6Al4V." In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/msec2013-1070.
Повний текст джерела