Добірка наукової літератури з теми "Lubricating textured"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Lubricating textured".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Lubricating textured"
Li, Chenchen, Xuefeng Yang, Shouren Wang, Yanjun Wang, Chongyang Lu, and Jinlong Cao. "Study on Friction and Lubrication Characteristics of Surface with Unidirectional Convergence Texture." Coatings 9, no. 12 (November 21, 2019): 780. http://dx.doi.org/10.3390/coatings9120780.
Повний текст джерелаYang, Fuqin, Dexing Hu, Qianhao Xiao, and Shun Zhao. "Experimental study on line-contact elastohydrodynamic grease lubrication properties of surface-textured rollers." Industrial Lubrication and Tribology 73, no. 3 (January 25, 2021): 477–84. http://dx.doi.org/10.1108/ilt-03-2020-0079.
Повний текст джерелаBhardwaj, Vivek, R. K. Pandey, and V. K. Agarwal. "Performance studies of textured race ball bearing." Industrial Lubrication and Tribology 71, no. 9 (November 4, 2019): 1116–23. http://dx.doi.org/10.1108/ilt-12-2018-0445.
Повний текст джерелаMa, Zhen, Junjie Song, Hengzhong Fan, Tianchang Hu, and Litian Hu. "Preparation and Study on Fretting Tribological Behavior of Composite Lubrication Structure on the Titanium Alloy Surface." Coatings 12, no. 3 (March 3, 2022): 332. http://dx.doi.org/10.3390/coatings12030332.
Повний текст джерелаJiang, Jie, Dang Sheng Xiong, Jian Liang Li, and Yan Shi. "Tribological Properties of Laser Surface Texturing and Coating Duplex-Treated Surface." Materials Science Forum 686 (June 2011): 706–10. http://dx.doi.org/10.4028/www.scientific.net/msf.686.706.
Повний текст джерелаHua, Xijun, Xuan Xie, Bifeng Yin, Peiyun Zhang, Jinghu Ji, Hao Wang, and Yonghong Fu. "Tribological performance and self-lubricating mechanism of the laser-textured surface filled with solid lubricant in rolling friction pair." Industrial Lubrication and Tribology 70, no. 2 (March 12, 2018): 371–84. http://dx.doi.org/10.1108/ilt-07-2017-0210.
Повний текст джерелаQiang, Haowen, Guangming Gao, Sitong Ye, Linkai Cheng, and Quandai Wang. "Effect of Characteristic Parameters and Distribution of Friction Pair Surface Texture on Lubrication Properties." Lubricants 11, no. 3 (March 14, 2023): 139. http://dx.doi.org/10.3390/lubricants11030139.
Повний текст джерелаZhang, Yu, Guoding Chen, and Lin Wang. "Effects of thermal and elastic deformations on lubricating properties of the textured journal bearing." Advances in Mechanical Engineering 11, no. 10 (October 2019): 168781401988379. http://dx.doi.org/10.1177/1687814019883790.
Повний текст джерелаWang, Hao, Xuan Xie, Xijun Hua, Bifeng Yin, Hang Du, Sheng Xu, and Bai Jing Qiu. "The effect of laser surface texturing to inhibit stick-slip phenomenon in sliding contact." Advances in Mechanical Engineering 11, no. 9 (September 2019): 168781401987463. http://dx.doi.org/10.1177/1687814019874635.
Повний текст джерелаTang, Jie, Jie Zeng, and Xin Lu. "Experimental Study on Texture Coupling Mechanism and Antifriction Performance of Piston Rod Seal Pair." Micromachines 13, no. 5 (April 30, 2022): 722. http://dx.doi.org/10.3390/mi13050722.
Повний текст джерелаДисертації з теми "Lubricating textured"
Tertuliano, Iramar da Silva. "Textura superficial: efeito sobre o desempenho de óleos aditivados e não aditivados em ensaios alternados." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/3/3151/tde-10082017-164633/.
Повний текст джерелаThis work was conducted by experimental tests in order to evaluate the effect of surface texture on fully formulated oil and base-oil performance. In these tests, the materials were related to the piston ring and cylinder, in which surfaces were sanded, grounded and textured by laser. In addition, the tests were carried out by reciprocating movement and boundary conditions. A coefficient of friction study in reciprocating tests was performed, showing that peak-to-peak methodology does not represent properly the tribosystem efficiency. Burr was generated around the dimples (made by laser surface texturing), in which were removed by sanded process. The results showed that sanded process increased the peak radius and decreased the peak height. The results considering the base oil showed oxide formation on the surface in all the cases, occurring low variation of friction coefficient in the system. On the other hand, in the fully formulated oil results, the dimples had no influence on MoS2 formation; however, it was possible to see a strong relation with the radius and average height of the asperities.
Venkatesan, Sriram. "SURFACE TEXTURES FOR ENHANCED LUBRICATION: FABRICATION AND CHARACTERIZATION TECHNIQUES." Lexington, Ky. : [University of Kentucky Libraries], 2005. http://lib.uky.edu/ETD/ukymeen2005t00274/Venkatesan%5FThesis.pdf.
Повний текст джерелаTitle from document title page (viewed on November 9, 2005). Document formatted into pages; contains viii, 85 p. : ill. Includes abstract and vita. Includes bibliographical references (p. 83-84).
Duvvuru, Ravi Shankar. "Novel self-adapting microscale surface textures for hydrodynamic lubrication." Auburn, Ala., 2007. http://repo.lib.auburn.edu/07M%20Theses/DUVVURU_RAVI_3.pdf.
Повний текст джерелаAli, Fadi. "Effect of Surface Texturing on Friction and Film Thickness under Starved Lubrication Conditions." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-234247.
Повний текст джерелаLi, Wei. "EXPERIMENTAL BENCHMARKING OF SURFACE TEXTURED LIP SEAL MODELS." UKnowledge, 2012. http://uknowledge.uky.edu/me_etds/14.
Повний текст джерелаWu, Yuanjie. "Study Of Interface Friction Reduction Using Laser Micro-Textured Die Surfaces In Metal Forming." The Ohio State University, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=osu1222022465.
Повний текст джерелаVyas, Prerit. "Effects of Stochastic (Random) Surface Roughness on Hydrodynamic Lubrication of Deterministic Asperity." UKnowledge, 2005. http://uknowledge.uky.edu/gradschool_theses/344.
Повний текст джерелаHichri, Yosra. "Adhérence des chaussées contaminées par des particules." Thesis, Ecole centrale de Nantes, 2018. http://www.theses.fr/2018ECDN0024/document.
Повний текст джерелаThe thesis aims to predict the skid resistance of road surfaces contaminated by fine particles. These particles are deposited on the road during dry periods and act, alone or mixing with rainwater, as a lubricant at the tire / road interface. The research methodology is based on the third body approach by distinguishing the phases of deposit and washing of particles by rain. Particles are characterized by their size distribution and their chemical and mineralogical compositions. The study is conducted at three scales: global, by measurements of friction and third body masses (particles during the deposit phase and the water / particles mixture during the washing phase); in the contact area by analyses of third body flows; and at the particle level by SEM observations. Particle flows during the deposit phase are identified by visualizations with a high-speed camera. The interaction between the particles and the road surface texture is highlited by microscopic observations. Flow modeling is used to estimate the coverage rate of a surface that, in turn, is used as a weighting factor to calculate the coefficient of friction during the deposit phase. In the presence of water, the volume fraction of the particles is used to estimate the viscosity of the mixture. The coefficient of friction during the washing phase depends on this viscosity and the coverage rate of the surface. Results are discussed in terms of the influence of particle characteristics (concentration,size) and road surface texture
Spencer, Andrew. "Optimizing surface texture for combustion engine cylinder liners." Licentiate thesis, Luleå tekniska universitet, Maskinelement, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-17001.
Повний текст джерелаGodkänd; 2010; 20101115 (spencer); LICENTIATSEMINARIUM Ämnesområde: Maskinelement/Machine Elements Examinator: Professor Roland Larsson, Luleå tekniska universitet Diskutant: Professor Michel Cervantes, Luleå tekniska universitet Tid: Fredag den 17 december 2010 kl 13.00 Plats: E231, Luleå tekniska universitet
Parmar, Utsav Kamleshbhai. "The Effects of Micro-dimple Texture on the Friction and Thermal Behavior of a Point Contact." Wright State University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=wright1462365682.
Повний текст джерелаЧастини книг з теми "Lubricating textured"
Hongbin, Liu, Li Lun, Xue Yujun, Li JiShun, and Ma Wei. "Effect of Different Textured Surfaces on Lubricating Characteristics of Area Contact Friction Pairs." In Advances in Intelligent and Soft Computing, 597–606. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-10430-5_46.
Повний текст джерелаGajrani, Kishor Kumar, Y. Bishal Singha, Mamilla Ravi Sankar, and Uday S. Dixit. "Tribological and Machining Performance of Graphite-, CaF2- and MoS2-Coated Mechanical Micro-textured Self-lubricating Cutting Tool." In Lecture Notes on Multidisciplinary Industrial Engineering, 151–65. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-6287-3_11.
Повний текст джерелаKato, Koji. "Surface Texture for Water Lubrication." In Encyclopedia of Tribology, 3489–93. Boston, MA: Springer US, 2013. http://dx.doi.org/10.1007/978-0-387-92897-5_6.
Повний текст джерелаFranco-Martínez, Francisco, Jorge Juan García Moltó, Javier Echávarri Otero, Enrique Chacón Tanarro, and Andrés Díaz-Lantada. "Using Artificial Intelligence to Predict Lubricated Friction in Microtextured Mechanical Contacts." In Proceedings of the XV Ibero-American Congress of Mechanical Engineering, 432–38. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-38563-6_63.
Повний текст джерелаPolcar, T. "Smart Surfaces for Lubrication: Solid Lubricants and Adaptive Texture." In Coating Technology for Vehicle Applications, 203–14. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14771-0_12.
Повний текст джерелаSulaiman, Mohd Hafis, Norhuda Hidayah Nordin, N. A. Sukindar, and M. J. M. Ridzuan. "Textured Tool Surfaces for Improved Lubrication and Friction in Sheet Metal Forming." In Green Tribology, 201–22. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9781003139386-9.
Повний текст джерелаSharma, Sanjay. "Lubrication Characteristics of Newtonian-Lubricated Hydrodynamic Bearing with Partial and Fully Textured Surface." In Lecture Notes in Mechanical Engineering, 1635–43. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-0550-5_158.
Повний текст джерелаHe, Xia, Wenling Liao, Guorong Wang, and Mengyuan Li. "Impact Evaluation Approach of a Texture Cross Section Shape on Hydrodynamic Lubrication Performance." In Advances in Mechanical Design, 1593–611. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6553-8_105.
Повний текст джерелаRajesh, Ramesh, M. Prem Ananth, Sangam Harish, Sakthivel Balaji, and R. Sivaguru. "Tribological Study on Sliding Contact Between Laser Surface Textured Titanium and Aluminium Alloy Under Lubrication." In Lecture Notes in Mechanical Engineering, 855–68. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-4488-0_72.
Повний текст джерелаHe, Xia, Wenling Liao, Guorong Wang, Mengyuan Li, and Jiang Shikai. "Simulation Analysis of Influences of Protrusion in Precision Machined Texture on Hydrodynamic Lubrication Performance." In Advances in Mechanical Design, 1621–34. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-6553-8_107.
Повний текст джерелаТези доповідей конференцій з теми "Lubricating textured"
Sharma, Varun, and Pulak Mohan Pandey. "Study of Ultrasonic Assisted Turning of 4340 Steel With Plane and Self-Lubricating Cutting Inserts." In ASME 2016 11th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/msec2016-8565.
Повний текст джерелаHao, Xiuqing, Xiaolu Song, Liang Li, and Ning He. "Tribological Properties of Textured Cemented Carbide Surfaces of Different Wettability Produced by Pulse Laser." In ASME 2017 12th International Manufacturing Science and Engineering Conference collocated with the JSME/ASME 2017 6th International Conference on Materials and Processing. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/msec2017-3072.
Повний текст джерелаLee, Yong Hoon, Jonathon Schuh, Randy H. Ewoldt, and James T. Allison. "Shape Parameterization Comparison for Full-Film Lubrication Texture Design." In ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/detc2016-60168.
Повний текст джерелаVenkatesan, Sriram, and Lyndon Scott Stephens. "Surface Textures for Enhanced Lubrication: Fabrication and Characterization Techniques." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-64291.
Повний текст джерелаPanigrahi, Dillip Kumar, and Mihir Sarangi. "Fabrication of Deterministic Micro-Asperities on Thrust Surfaces Using Photo Chemical Machining." In ASME 2019 14th International Manufacturing Science and Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/msec2019-2955.
Повний текст джерелаNgaile, Gracious, Mark Gariety, and Taylan Altan. "Enhancing Tribological Conditions in Tube Hydroforming by Using Textured Tubes." In ASME/STLE 2004 International Joint Tribology Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/trib2004-64020.
Повний текст джерелаQiu, Mingfeng, Brian Bailey, Rob Stoll, and Bart Raeymaekers. "The Validity of the Compressible Reynolds Equation for Gas Lubricated Textured Parallel Slider Bearings." In ASME/STLE 2012 International Joint Tribology Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/ijtc2012-61051.
Повний текст джерелаFang, Hsu-Wei, and Yu-Chih Su. "Effects of Biological Lubrication on the Morphology of UHMWPE Wear Particles Generated With Surface Textures." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63501.
Повний текст джерелаTock, Andrew, Rahul Gandhi, Christopher Saldana, and Patricia Iglesias. "Wear Performance of New Textured Surfaces Created by Modulation Machining." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-70721.
Повний текст джерелаMazzonetto, M. "Surface micro – texturing of tapping tools with complex geometry." In Italian Manufacturing Association Conference. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902714-43.
Повний текст джерела