Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Lower alpine crust.
Статті в журналах з теми "Lower alpine crust"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Lower alpine crust".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
1
Andrés, Juvenal, Puy Ayarza, Martin Schimmel, Imma Palomeras, Mario Ruiz, and Ramon Carbonell. "What can seismic noise tell us about the Alpine reactivation of the Iberian Massif? An example in the Iberian Central System." Solid Earth 11, no. 6 (December 18, 2020): 2499–513. http://dx.doi.org/10.5194/se-11-2499-2020.
Повний текст джерелаАнотація:
Abstract. The Iberian Central System, formed after the Alpine reactivation of the Variscan Iberian Massif, features maximum altitudes of 2500 m. It is surrounded by two foreland basins with contrasting elevation: the Duero Basin to the north, located at 750–800 m, and the Tajo Basin to the south, lying at 450–500 m. The deep crustal structure of this mountain range seems to be characterized by the existence of a moderate crustal root that provides isostatic support for its topography. New seismic data are able to constrain the geometry of this crustal root, which appears to be defined by a northward lower-crustal imbrication of the southern Central Iberian crust underneath this range. Contrarily to what was expected, this imbrication also affects the upper crust, as the existing orogen-scale mid-crustal Variscan detachment was probably assimilated during the Carboniferous crustal melting that gave rise to the Central System batholith. In addition, the lower crust might have thinned, allowing coupled deformation at both crustal levels. This implies that the reactivated upper-crustal fractures can reach lower-crustal depths, thus allowing the entire crust to sink. This new model can explain the differences in topography between the Central System foreland basins. Also, it provides further constraints on the crustal geometry of this mountain range, as it seems to be that of an asymmetric Alpine-type orogen, thus hindering the existence of buckling processes as the sole origin of the deformation. The results presented here have been achieved after autocorrelation of seismic noise along the CIMDEF (Central Iberian Massif DEFormation Mechanisms) profile. Although the resolution of the dataset features limited resolution (0.5–4 Hz, stations placed at ∼ 5 km), this methodology has allowed us to pinpoint some key structures that helped to constraint the deformation mechanisms that affected Central Iberia during the Alpine orogeny.
2
Tadiello, Davide, and Carla Braitenberg. "Gravity modeling of the Alpine lithosphere affected by magmatism based on seismic tomography." Solid Earth 12, no. 2 (March 2, 2021): 539–61. http://dx.doi.org/10.5194/se-12-539-2021.
Повний текст джерелаАнотація:
Abstract. The southern Alpine regions were affected by several magmatic and volcanic events between the Paleozoic and the Tertiary. This activity undoubtedly had an important effect on the density distribution and structural setting at lithosphere scale. Here the gravity field has been used to create a 3D lithosphere density model on the basis of a high-resolution seismic tomography model. The results of the gravity modeling demonstrate a highly complex density distribution in good agreement with the different geological domains of the Alpine area represented by the European Plate, the Adriatic Plate and the Tyrrhenian basin. The Adriatic-derived terrains (Southalpine and Austroalpine) of the Alps are typically denser (2850 kg m−3), whilst the Alpine zone, composed of terrains of European provenance (Helvetic and Tauern Window), presents lower density values (2750 kg m−3). Inside the Southalpine, south of the Dolomites, a well-known positive gravity anomaly is present, and one of the aims of this work was to investigate the source of this anomaly that has not yet been explained. The modeled density suggests that the anomaly is related to two different sources; the first involves the middle crust below the gravity anomaly and is represented by localized mushroom-shaped bodies interpreted as magmatic intrusions, while a second wider density anomaly affects the lower crust of the southern Alpine realm and could correspond to a mafic and ultramafic magmatic underplating (gabbros and related cumulates) developed during Paleozoic extension.
3
Lu, Y., L. Stehly, R. Brossier, and A. Paul. "Imaging Alpine crust using ambient noise wave-equation tomography." Geophysical Journal International 222, no. 1 (March 24, 2020): 69–85. http://dx.doi.org/10.1093/gji/ggaa145.
Повний текст джерелаАнотація:
SUMMARY We present an improved crustal Vs model and Moho depth map using ambient noise wave-equation tomography. The so-called ‘ambient noise wave-equation tomography’ is a method to invert seismic ambient noise phase dispersion data based on elastic waveform simulation, which accounts for 3-D and finite-frequency effects. We use cross-correlations of up to 4 yr of continuous vertical-component ambient seismic noise recordings from 304 high-quality broad-band stations in the Alpine region. We use model LSP_Eucrust1.0 obtained from traditional ambient noise tomography as initial model, and we iteratively improve the initial model by minimizing frequency-dependent phase traveltime differences between the observed and synthetic waveforms of Rayleigh waves in the period range 10–50 s. We obtain the final model after 15 iterations with ∼65 per cent total misfit reduction compared to the initial model. At crustal depth, the final model significantly enhances the amplitudes and adjusts the shapes of velocity anomalies. At Moho and upper-mantle depth, the final model corrects an obvious systematic velocity shift of the initial model. The resulting isovelocity Moho map confirms a Moho step along the external side of the external crystalline massifs of the northwestern Alps and reveals underplated gabbroic plutons in the lower most crust of the central and eastern Alps. Ambient noise wave-equation tomography turns out to be a useful tool to refine shear wave velocity models obtained by traditional ambient noise tomography based on ray theory.
4
Zagorchev, Ivan. "Deep structure of the Earth's crust in South Bulgaria: geological aspects." Geologica Balcanica 20, no. 1 (February 28, 1990): 93–100. http://dx.doi.org/10.52321/geolbalc.20.1.93.
Повний текст джерелаАнотація:
The layered structure of the Earth's crust in South Bulgaria is a result of the complicated geologic development, and of changes in the physical properties of the rocks under high pressures and temperatures. The following layers are distinguished (from bottom to top): Layer "A" (dehydrated lower crust) with layer velocities from 6.4 to 6.7 km/s, and characterized by low-velocity ductile deformations: Layer "B" (hydrated upper crust) with layer velocities 5.9–6.0 km/s, and characterized by homogeneous strains, as well as by deformations by cataclastic flow; low-velocity layer which developed only partially in the west part of Rhodope Massif, and is deformed by superplastic flow; presumably, it compensated differently directed movements in adjacent layers during some deformational stages; granitoid-metamorphic crust characterized mainly by brittle deformations. This structure probably resulted from multiphase deformations during several tectonic cycles. The dynamic environment changed considerably, compression stages being replaced by extension stages; in some stages different crust layers behaved differently, e. g. with an extension environment in the granitoid-metamorphic crust, and compression – within the deeper levels. Crustal thickening is due to different mechanisms but has been bound mainly to continental collision. With reaching a crytical thickness, isostasy-bound uplift led to thinning by erosion. Other mechanisms of crustal thinning are bound to environments of generalized extension and rifting, homogeneous deformation, or non-homogeneous ductile deformation with necking. As a result of multiphase crustal thickening, Rhodope Massif formed as a peculiar crustal lensoid body. The collisional orogen on the Balkan Peninsula, at least during the Alpine cycle, had a transitional character – from Alpine towards the Himalayan-Tibethan type, the Rhodope Massif playing the part of plateau.
5
Ribes, Charlotte, Benoit Petri, Jean-François Ghienne, Gianreto Manatschal, Federico Galster, Garry D. Karner, Patricio H. Figueredo, Christopher A. Johnson, and Anne-Marie Karpoff. "Tectono-sedimentary evolution of a fossil ocean-continent transition: Tasna nappe, central Alps (SE Switzerland)." GSA Bulletin 132, no. 7-8 (November 7, 2019): 1427–46. http://dx.doi.org/10.1130/b35310.1.
Повний текст джерелаАнотація:
Abstract Magma-poor ocean-continent transitions at distal rifted margins record complex stratigraphic interactions engendered by extreme crustal thinning and mantle exhumation. The Tasna ocean-continent transition, exposed in the Middle Penninic Tasna nappe in eastern Switzerland, is so far the only known example where the lateral transition from continental crust to exhumed serpentinized mantle lithosphere is exposed and not overprinted by later Alpine deformation. This paper presents sedimentological, structural, and petrographical observations and detrital zircon provenance data to document: (1) the processes controlling continental hyperextension and mantle exhumation; and (2) the facies, depositional systems, sediment sources, delivery pathways, and depositional stacking patterns associated with magma-poor ocean-continent transitions. Our results show that the basement units of the Tasna ocean-continent transition are composed of prerift upper and lower crust and subcontinental mantle rocks juxtaposed as part of the continental crustal thinning process. The absence of pervasive, synrift deformation in the lower-crustal rocks indicates that the thinning was likely achieved by deformation along localized shear zones before being exhumed at the seafloor by brittle, late extensional detachment faulting and not by any form of lower-crustal flow. The age of the first sediments deposited on the continental crust and exhumed mantle, the so-called Tonschiefer Formation, is considered to be Late Jurassic. A key observation is that the restored morpho-tectonic and sedimentary evolution of the Tasna ocean-continent transition shows the intercalation of downdip, transported platform-derived sediments and along-axis–derived siliciclastic sediments originating from the recycling of prerift sediments, local basement, and/or extra-Alpine sources.
6
Puglisi, Diego. "Tectonic evolution of the Sicilian Maghrebian Chain inferred from stratigraphic and petrographic evidences of Lower Cretaceous and Oligocene flysch." Geologica Carpathica 65, no. 4 (August 1, 2014): 293–305. http://dx.doi.org/10.2478/geoca-2014-0020.
Повний текст джерелаАнотація:
Abstract The occurrence of a Lower Cretaceous flysch group, cropping out from the Gibraltar Arc to the Balkans with a very similar structural setting and sedimentary provenance always linked to the dismantling of internal areas, suggests the existence of only one sedimentary basin (Alpine Tethys s.s.), subdivided into many other minor oceanic areas. The Maghrebian Basin, mainly developed on thinned continental crust, was probably located in the westernmost sector of the Alpine Tethys. Cretaceous re-organization of the plates triggered one (or more) tectonic phases, well recorded in almost all the sectors of the Alpine Tethys. However, the Maghrebian Basin seems to have been deformed by Late- or post-Cretaceous tectonics, connected with a “meso-Alpine” phase (pre-Oligocene), already hypothesized since the beginning of the nineties. Field geological evidence and recent biostratigraphic data also support this important meso- Alpine tectonic phase in the Sicilian segment of the Maghrebian Chain, indicated by the deformations of a Lower Cretaceous flysch sealed by Lower Oligocene turbidite deposits. This tectonic development is emphasized here because it was probably connected with the onset of rifting in the southern paleomargin of the European plate, the detaching of the so-called AlKaPeCa block (Auct.; i.e. Alboran + Kabylian + Calabria and Peloritani terranes) and its fragmentation into several microplates. The subsequent early Oligocene drifting of these microplates led to the progressive closure of the Maghrebian Basin and the opening of new back-arc oceanic basins, strongly controlled by extensional processes, in the western Mediterranean (i.e. Gulf of Lion, Valencia Trough, Provençal Basin and Alboran Sea).
7
Ayarza, Puy, José Ramón Martínez Catalán, Ana Martínez García, Juan Alcalde, Juvenal Andrés, José Fernando Simancas, Immaculada Palomeras, et al. "Evolution of the Iberian Massif as deduced from its crustal thickness and geometry of a mid-crustal (Conrad) discontinuity." Solid Earth 12, no. 7 (July 6, 2021): 1515–47. http://dx.doi.org/10.5194/se-12-1515-2021.
Повний текст джерелаАнотація:
Abstract. Normal incidence seismic data provide the best images of the crust and lithosphere. When properly designed and continuous, these sections greatly contribute to understanding the geometry of orogens and, along with surface geology, unraveling their evolution. In this paper we present the most complete transect, to date, of the Iberian Massif, the westernmost exposure of the European Variscides. Despite the heterogeneity of the dataset, acquired during the last 30 years, the images resulting from reprocessing the data with a homogeneous workflow allow us to clearly define the crustal thickness and its internal architecture. The Iberian Massif crust, formed by the amalgamation of continental pieces belonging to Gondwana and Laurussia (Avalonian margin), is well structured in the upper and lower crust. A conspicuous mid-crustal discontinuity is clearly defined by the top of the reflective lower crust and by the asymptotic geometry of reflections that merge into it, suggesting that it has often acted as a detachment. The geometry and position of this discontinuity can give us insights into the evolution of the orogen (i.e., of the magnitude of compression and the effects and extent of later-Variscan gravitational collapse). Moreover, the limited thickness of the lower crust below, in central and northwestern Iberia, might have constrained the response of the Iberian microplate to Alpine shortening. Here, this discontinuity, featuring a Vp (P-wave velocity) increase, is observed as an orogen-scale boundary with characteristics compatible with those of the globally debated Conrad discontinuity.
8
Relvini, Alessio, Silvana Martin, Bruna B. Carvalho, Giacomo Prosser, Luca Toffolo, Patrizia Macera, and Omar Bartoli. "Genesis of the Eastern Adamello Plutons (Northern Italy): Inferences for the Alpine Geodynamics." Geosciences 12, no. 1 (December 28, 2021): 13. http://dx.doi.org/10.3390/geosciences12010013.
Повний текст джерелаАнотація:
The Corno Alto–Monte Ospedale magmatic complex crops out at the eastern border of the Adamello batholith, west of the South Giudicarie Fault (NE Italy). This complex includes tonalites, trondhjemites, granodiorites, granites and diorites exhibiting an unfoliated structure suggesting passive intrusion under extensional-to-transtensional conditions. Major, minor elements, REE and isotopic analyses and geochemical and thermodynamic modelling have been performed to reconstruct the genesis of this complex. Geochemical analyses unravel a marked heterogeneity with a lack of intermediate terms. Samples from different crust sections were considered as possible contaminants of a parental melt, with the European crust of the Serre basement delivering the best fit. The results of the thermodynamic modelling show that crustal melts were produced in the lower crust. Results of the geochemical modelling display how Corno Alto felsic rocks are not reproduced by fractional crystallization nor by partial melting alone: their compositions are intermediate between anatectic melts and melts produced by fractional crystallization. The tectonic scenario which favored the intrusion of this complex was characterized by extensional faults, active in the Southalpine domain during Eocene. This extensional scenario is related to the subduction of the Alpine Tethys in the Eastern Alps starting at Late Cretaceous time.
9
Zucali, Michele, Luca Corti, Manuel Roda, Gaetano Ortolano, Roberto Visalli, and Davide Zanoni. "Quantitative X-ray Maps Analaysis of Composition and Microstructure of Permian High-Temperature Relicts in Acidic Rocks from the Sesia-Lanzo Zone Eclogitic Continental Crust, Western Alps." Minerals 11, no. 12 (December 15, 2021): 1421. http://dx.doi.org/10.3390/min11121421.
Повний текст джерелаАнотація:
Three samples of meta-acidic rocks with pre-Alpine metamorphic relicts from the Sesia-Lanzo Zone eclogitic continental crust were investigated using stepwise controlled elemental maps by means of the Quantitative X-ray Maps Analyzer (Q-XRMA). Samples were chosen with the aim of analysing the reacting zones along the boundaries between the pre-Alpine and Alpine mineral phases, which developed in low chemically reactive systems. The quantitative data treatment of the X-ray images was based on a former multivariate statistical analytical stage followed by a sequential phase and sub-phase classification and permitted to isolate and to quantitatively investigate the local paragenetic equilibria. The parageneses thus observed were interpreted as related to the pre-Alpine metamorphic or magmatic stages as well as to local Alpine re-equilibrations. On the basis of electron microprobe analysis, specific compositional ranges were defined in micro-domains of the relict and new paragenetic equilibria. In this way calibrated compositional maps were obtained and used to contour different types of reacting boundaries between adjacent solid solution phases. The pre-Alpine and Alpine mineral parageneses thus obtained allowed to perform geothermobarometry on a statistically meaningful and reliable dataset. In general, metamorphic temperatures cluster at 600–700 °C and 450–550 °C, with lower temperatures referred to a retrograde metamorphic re-equilibration. In all the cases described, pre-Alpine parageneses were overprinted by an Alpine metamorphic mineral assemblage. Pressure-temperature estimates of the Alpine stage averagely range between 420 to 550 °C and 12 to 16.5 kbar. The PT constraints permitted to better define the pre-Alpine metamorphic scenario of the western Austroalpine sectors, as well as to better understand the influence of the pre-Alpine metamorphic inheritance on the forthcoming Alpine tectonic evolution.
10
Salvadori, Claudia, Guido Rocchigiani, Camilla Lazzarotti, Nicoletta Formenti, Tiziana Trogu, Paolo Lanfranchi, Claudia Zanardello, Carlo Citterio, and Alessandro Poli. "Histological Lesions and Cellular Response in the Skin of Alpine Chamois (Rupicapra r. rupicapra) Spontaneously Affected by Sarcoptic Mange." BioMed Research International 2016 (2016): 1–8. http://dx.doi.org/10.1155/2016/3575468.
Повний текст джерелаАнотація:
Population dynamics of chamois (genusRupicapra, subfamily Caprinae) can be influenced by infectious diseases epizootics, of which sarcoptic mange is probably the most severe in the Alpine chamois (Rupicapra rupicapra rupicapra). In this study, skin lesions and cellular inflammatory infiltrates were characterized in 44 Alpine chamois affected by sarcoptic mange. Dermal cellular responses were evaluated in comparison with chamois affected by trombiculosis and controls. In both sarcoptic mange and trombiculosis, a significantly increase of eosinophils, mast cells, T and B lymphocytes, and macrophages was detected. Moreover, in sarcoptic mange significant higher numbers of T lymphocytes and macrophages compared to trombiculosis were observed. Lesions in sarcoptic mange were classified in three grades, according to crusts thickness, correlated with mite counts. Grade 3 represented the most severe form with crust thickness more than 3.5 mm, high number of mites, and severe parakeratosis with diffuse bacteria. Evidence of immediate and delayed hypersensitivity was detected in all three forms associated with diffuse severe epidermal hyperplasia. In grade 3, a significant increase of B lymphocytes was evident compared to grades 1 and 2, while eosinophil counts were significantly higher than in grade 1, but lower than in grade 2 lesions. An involvement of nonprotective Th2 immune response could in part account for severe lesions of grade 3.
11
Dai, Licong, Ruiyu Fu, Xiaowei Guo, Yangong Du, Guangmin Cao, Huakun Zhou, and Zhongmin Hu. "Biocrust-reduced soil water retention and soil infiltration in an alpine Kobresia meadow." Hydrology and Earth System Sciences 27, no. 23 (December 1, 2023): 4247–56. http://dx.doi.org/10.5194/hess-27-4247-2023.
Повний текст джерелаАнотація:
Abstract. Biocrust is a key component of ecosystems and plays a vital role in altering hydrological processes in terrestrial ecosystems. The impacts of biocrust on hydrological processes in arid and semi-arid ecosystems have been widely documented. However, the effects and mechanisms of biocrust on soil hydrological processes in alpine ecosystems are still poorly understood. In this study, we selected two meadow types from the northern Qinghai–Tibet Plateau: normal Kobresia meadow (NM) and biocrust meadow (BM). Both the soil hydrological and physicochemical properties were examined. We found that, in the 0–30 cm soil layer, soil water retention and soil water content in NM were higher than those in BM, whereas the 30–40 cm layer's soil water retention and soil water content in NM were lower than those in BM. The topsoil infiltration rate in BM was lower than that in NM. Furthermore, the physicochemical properties were different between NM and BM. The 0–10 cm soil layer's clay content in BM was 9 % higher than that in NM, whereas the 0–30 cm layer's soil capillary porosity in NM was higher than that in BM. In addition, the 0–20 cm layer's soil total nitrogen (TN) and soil organic matter (SOM) in NM were higher than those in BM, implying that the presence of biocrust may not favor the formation of soil nutrients owing to its lower soil microbial biomass carbon and microbial biomass nitrogen. Overall, soil water retention was determined by SOM by altering the soil capillary porosity and bulk density. Our findings suggest that the establishment of cyanobacteria crust biocrust may not improve soil water retention and infiltration, and the soil in cyanobacteria crust meadows could be more vulnerable to runoff generation and consequent soil erosion. These results provide a systematic and comprehensive understanding of the effects of biocrust on the soil hydrology of alpine ecosystems.
12
PFIFFNER, O. ADRIAN. "Basement-involved thin-skinned and thick-skinned tectonics in the Alps." Geological Magazine 153, no. 5-6 (January 22, 2016): 1085–109. http://dx.doi.org/10.1017/s0016756815001090.
Повний текст джерелаАнотація:
AbstractThe deformation of continental crust during continental collision by folding and thrusting follows three types of structural styles: (1) in a true thin-skinned style only cover rocks are involved; (2) in the case of a thin-skinned basement-involved style, thin slabs of crystalline basement rocks are piled up into a nappe stack; (3) in a true thick-skinned style, the entire upper crust is involved in the deformation. In the Alps all three styles can be recognized. The Helvetic nappes and parts of the Penninic nappes exhibit true thin-skinned style tectonics. Triassic evaporites, Jurassic shales and Cretaceous marls acted as detachment horizons. Basement-involved thin-skinned tectonics is typical for the Penninic nappes in the core of the orogen. The thickness of the basement thrust sheets is controlled by the effects of Mesozoic rifting, by deep burial and heating of the subducting crust and by the presence of Late Palaeozoic structures. Thick-skinned style is observed in the more external parts of the orogen, the external massifs and the Southalpine nappe system. It occurred in the late phase of collision and involved the entire upper crust. The basal detachment occurred possibly along phyllonites generated by the breakdown of load-bearing feldspar. Considering the Alpine orogen as a whole, the lower crust deformed seemingly independently from the upper crust. The detachment of the cover units by thin-skinned tectonics occurred prior to thrusting related to basement-involved thin-skinned tectonics. Thrust faults of both types were overprinted by ‘post-nappe folding’.
13
Handy, Mark R., Stefan M. Schmid, Marcel Paffrath, and Wolfgang Friederich. "Orogenic lithosphere and slabs in the greater Alpine area – interpretations based on teleseismic P-wave tomography." Solid Earth 12, no. 11 (November 25, 2021): 2633–69. http://dx.doi.org/10.5194/se-12-2633-2021.
Повний текст джерелаАнотація:
Abstract. Based on recent results of AlpArray, we propose a new model of Alpine collision that involves subduction and detachment of thick (∼ 180 km) European lithosphere. Our approach combines teleseismic P-wave tomography and existing local earthquake tomography (LET), allowing us to image the Alpine slabs and their connections with the overlying orogenic lithosphere at an unprecedented resolution. The images call into question the conventional notion that downward-moving lithosphere and slabs comprise only seismically fast lithosphere. We propose that the European lithosphere is heterogeneous, locally containing layered positive and negative Vp anomalies of up to 5 %–6 %. We attribute this layered heterogeneity to seismic anisotropy and/or compositional differences inherited from the Variscan and pre-Variscan orogenic cycles rather than to thermal anomalies. The lithosphere–asthenosphere boundary (LAB) of the European Plate therefore lies below the conventionally defined seismological LAB. In contrast, the lithosphere of the Adriatic Plate is thinner and has a lower boundary approximately at the base of strong positive Vp anomalies at 100–120 km. Horizontal and vertical tomographic slices reveal that beneath the central and western Alps, the European slab dips steeply to the south and southeast and is only locally still attached to the Alpine lithosphere. However, in the eastern Alps and Carpathians, this slab is completely detached from the orogenic crust and dips steeply to the north to northeast. This along-strike change in attachment coincides with an abrupt decrease in Moho depth below the Tauern Window, the Moho being underlain by a pronounced negative Vp anomaly that reaches eastward into the Pannonian Basin area. This negative Vp anomaly is interpreted as representing hot upwelling asthenosphere that heated the overlying crust, allowing it to accommodate Neogene orogen-parallel lateral extrusion and thinning of the ALCAPA tectonic unit (upper plate crustal edifice of Alps and Carpathians) to the east. A European origin of the northward-dipping, detached slab segment beneath the eastern Alps is likely since its down-dip length matches estimated Tertiary shortening in the eastern Alps accommodated by originally south-dipping subduction of European lithosphere. A slab anomaly beneath the Dinarides is of Adriatic origin and dips to the northeast. There is no evidence that this slab dips beneath the Alps. The slab anomaly beneath the Northern Apennines, also of Adriatic origin, hangs subvertically and is detached from the Apenninic orogenic crust and foreland. Except for its northernmost segment where it locally overlies the southern end of the European slab of the Alps, this slab is clearly separated from the latter by a broad zone of low Vp velocities located south of the Alpine slab beneath the Po Basin. Considered as a whole, the slabs of the Alpine chain are interpreted as highly attenuated, largely detached sheets of continental margin and Alpine Tethyan oceanic lithosphere that locally reach down to a slab graveyard in the mantle transition zone (MTZ).
14
Andrés, Juvenal, Deyan Draganov, Martin Schimmel, Puy Ayarza, Imma Palomeras, Mario Ruiz, and Ramon Carbonell. "Lithospheric image of the Central Iberian Zone (Iberian Massif) using global-phase seismic interferometry." Solid Earth 10, no. 6 (November 12, 2019): 1937–50. http://dx.doi.org/10.5194/se-10-1937-2019.
Повний текст джерелаАнотація:
Abstract. The Spanish Central System is an intraplate mountain range that divides the Iberian Inner Plateau in two sectors – the northern Duero Basin and the Tajo Basin to the south. The topography of the area is highly variable with the Tajo Basin having an average altitude of 450–500 m and the Duero Basin having a higher average altitude of 750–800 m. The Spanish Central System is characterized by a thick-skin pop-up and pop-down configuration formed by the reactivation of Variscan structures during the Alpine orogeny. The high topography is, most probably, the response of a tectonically thickened crust that should be the response to (1) the geometry of the Moho discontinuity, (2) an imbricated crustal architecture, and/or (3) the rheological properties of the lithosphere. Shedding some light on these features is the main target of the current investigation. In this work, we present the lithospheric-scale model across this part of the Iberian Massif. We have used data from the Central Iberian Massif Deformation (CIMDEF) project, which consists of recordings of an almost-linear array of 69 short-period seismic stations, which define a 320 km long transect. We have applied the so-called global-phase seismic interferometry. The technique uses continuous recordings of global earthquakes (>120∘ epicentral distance) to extract global phases and their reverberations within the lithosphere. The processing provides an approximation of the zero-offset reflection response of a single station to a vertical source, sending (near)-vertical seismic energy. Results indeed reveal a clear thickening of the crust below the Central System, resulting, most probably, from an imbrication of the lower crust. Accordingly, the crust–mantle boundary is mapped as a relatively flat interface at approximately 10 s two-way travel time except in the Central System, where this feature deepens towards the NW reaching more than 12 s. The boundary between the upper and lower crust is well defined and is found at 5 s two-way travel time. The upper crust has a very distinctive signature depending on the region. Reflectivity at upper-mantle depths is scattered throughout the profile, located between 13 and 18 s, and probably related to the Hales discontinuity.
15
Thorwart, Martin, Anke Dannowski, Ingo Grevemeyer, Dietrich Lange, Heidrun Kopp, Florian Petersen, Wayne C. Crawford, and Anne Paul. "Basin inversion: reactivated rift structures in the central Ligurian Sea revealed using ocean bottom seismometers." Solid Earth 12, no. 11 (November 12, 2021): 2553–71. http://dx.doi.org/10.5194/se-12-2553-2021.
Повний текст джерелаАнотація:
Abstract. The northern margin of the Ligurian Basin shows notable seismicity at the Alpine front, including frequent magnitude 4 events. Seismicity decreases offshore towards the Basin centre and Corsica, revealing a diffuse distribution of low-magnitude earthquakes. We analyse data of the amphibious AlpArray seismic network with focus on the offshore component, the AlpArray ocean bottom seismometer (OBS) network, consisting of 24 broadband OBSs deployed for 8 months, to reveal the seismicity and depth distribution of micro-earthquakes beneath the Ligurian Sea. Two clusters occurred between ∼ 10 km to ∼ 16 km depth below the sea surface, within the lower crust and uppermost mantle. Thrust faulting focal mechanisms indicate compression and an inversion of the Ligurian Basin, which is an abandoned Oligocene–Miocene rift basin. The basin inversion is suggested to be related to the Africa–Europe plate convergence. The locations and focal mechanisms of seismicity suggest reactivation of pre-existing rift-related structures. Slightly different striking directions of presumed rift-related faults in the basin centre compared to faults further east and hence away from the rift basin may reflect the counter-clockwise rotation of the Corsica–Sardinia block. High mantle S-wave velocities and a low Vp/Vs ratio support the hypothesis of strengthening of crust and uppermost mantle during the Oligocene–Miocene rifting-related extension and thinning of continental crust.
16
Rossi, Philippe, Alain Cocherie, C. Mark Fanning, and Étienne Deloule. "Variscan to eo-Alpine events recorded in European lower-crust zircons sampled from the French Massif Central and Corsica, France." Lithos 87, no. 3-4 (April 2006): 235–60. http://dx.doi.org/10.1016/j.lithos.2005.06.009.
Повний текст джерела
17
Demir, Tuncer, Rob Westaway, and David Bridgland. "The Influence of Crustal Properties on Patterns of Quaternary Fluvial Stratigraphy in Eurasia." Quaternary 1, no. 3 (December 5, 2018): 28. http://dx.doi.org/10.3390/quat1030028.
Повний текст джерелаАнотація:
Compilation of empirical data on river-terrace sequences from across Eurasia during successive International Geoscience Programme (IGCP) projects revealed marked contrasts between the records from different crustal provinces, notably between the East European Platform (EEP) and the Caledonian/Variscan/Alpine provinces of western/central Europe. Well-developed terrace staircases, often indicative of hundreds of metres of Late Cenozoic uplift/fluvial incision, are preserved in many parts of the European continent, especially westward of the EEP. In contrast, rivers within the EEP have extensive sedimentary archives that are not preserved as terrace staircases; instead, they form sets of laterally accreted sediment packages, never more than a few tens of metres above or below modern river level. There are parallels in Asia, albeit that the crust of the Asian continent has a greater proportion of tectonically active zones, at one extreme, and stable platforms/cratons at the other. The observed patterns point strongly to the mobility of lower-crustal material within younger provinces, where the continental crust is significantly hotter, as a key part of the mechanism driving the progressive uplift that has led to valley incision and the formation of river terraces: a process of erosional isostasy with lower-crustal flow as a positive-feedback driver. The contrast between these different styles of fluvial-archive preservation is of considerable significance for Quaternary stratigraphy, as such archives provide important templates for the understanding of the terrestrial record.
18
Festa, Vincenzo, Annamaria Fornelli, Francesca Micheletti, Richard Spiess, and Fabrizio Tursi. "Ductile Shearing and Focussed Rejuvenation: Records of High-P (eo-)Alpine Metamorphism in the Variscan Lower Crust (Serre Massif, Calabria—Southern Italy)." Geosciences 12, no. 5 (May 17, 2022): 212. http://dx.doi.org/10.3390/geosciences12050212.
Повний текст джерелаАнотація:
In the present study, we unveil the real significance of mylonitic reworking of the polymetamorphic crystalline basement in the Serre Massif of Calabria (Southern Italy). We use a multidisciplinary approach to comprehend the structural, microstructural and petrologic changes that occurred along a, so far, not much considered shear zone affecting the Variscan lower crustal rocks. It was never before studied in detail, although some late Cretaceous ages were reported for these mylonites, suggesting that this shear zone is of prime importance. Our observations reveal now that the formation of the new structural fabric within the shear zone was accompanied by changes in mineral assemblages, in a dominant compressive tectonic regime. During this tectono-metamorphic event, high-P mylonitic mineral assemblages were stabilized, consisting of chloritoid, kyanite, staurolite, garnet and paragonite, whereas plagioclase became unstable. Average peak P–T conditions of 1.26–1.1 GPa and 572–626 °C were obtained using THERMOCALC software. These data question (i) that the Serre Massif represents an undisturbed continuous section of the Variscan crust, as generally suggested in the literature, and (ii) highlight the role of (eo-)Alpine high-P tectonics in the Serre Massif, recorded within mylonite zones, where the Variscan basement was completely rejuvenated.
19
Gordienko, Vadim, and Ivan Gordienko. "GEODYNAMICS." GEODYNAMICS 1(34)2023, no. 1(34) (June 2023): 47–56. http://dx.doi.org/10.23939/jgd2023.01.047.
Повний текст джерелаАнотація:
The study aims to build a three-dimensional thermal model of the crust and upper mantle of the territory of Ukraine. Its basis is a scheme of deep processes in the tectonosphere, which, first of all, considers the results of heat and mass transfer during modern activation. They are superimposed on the models of the platform (except for the territory of the East European platform; the Donbass is also included in it), the Alpine geosyncline of the Carpathians, and the Hercynian-Cimmerian geosyncline of the Scythian plate. The incomplete process of modern activation cannot be accurately described by the geological theory used by the authors. Gravity modeling was previously conducted on a system of profiles around the northern hemisphere with a total length of more than 30,000 km, crossing Eurasia, North America, as well as the Atlantic and Pacific oceans to select an adequate scheme of heat and mass transfer. The paper distinguishes the most realistic scheme of the process . It is applied for Ukraine, and the more accurately the activated area is determined. Such a task was solved for the first time. In the south, the model is limited by the Black Sea depression, at a depth of 400 km. Temperatures in the transition zone to the lower mantle were not considered. Test thermal models are compared with geothermometers. The error (50°C) of calculation and cross-section of isotherms is determined (150°C for depths from 50 to 400 km, at a depth of 25 km the error is lower, the cross-section of isotherms is 100°C). Zones of partial melting of the rocks of the crust and upper mantle have been established. They are distributed in the middle part of the crust, in the upper horizons of the mantle (50-100 km). At a depth of about 400 km, partial melting occurs only under the non-activated part of the platform. Differences in the model from the presented one are described. They are associated with possible variations in the age of the process and its peculiarities at different levels of heat and mass transfer. Practical significance. The study emphasizes that mineral deposits are characteristic to thermal anomalies and other environmental parameters.
20
Schmidtke, Michael J., Ruth Keppler, Jacek Kossak-Glowczewski, Nikolaus Froitzheim, and Michael Stipp. "Elastic anisotropies of rocks in a subduction and exhumation setting." Solid Earth 12, no. 8 (August 13, 2021): 1801–28. http://dx.doi.org/10.5194/se-12-1801-2021.
Повний текст джерелаАнотація:
Abstract. Subduction and exhumation are key processes in the formation of orogenic systems across the world, for example, in the European Alps. For geophysical investigations of these orogens, it is essential to understand the petrophysical properties of the rocks involved. These are the result of a complex interaction of mineral composition and rock fabric including mineral textures (i.e., crystallographic preferred orientations). In this study we present texture-derived elastic anisotropy data for a representative set of different lithologies involved in the Alpine orogeny. Rock samples were collected in the Lago di Cignana area in Valtournenche, in the Italian northwestern Alps. At this locality a wide range of units of continental and oceanic origin with varying paleogeographic affiliations and tectono-metamorphic histories are accessible. Their mineral textures were determined by time-of-flight neutron diffraction. From these data the elastic properties of the samples were calculated. The data set includes representative lithologies from a subduction-exhumation setting. In subducted lithologies originating from the oceanic crust, the P-wave anisotropies (AVPs [%]) range from 1.4 % to 3.7 % with average P-wave velocities of 7.20–8.24 km/s and VP / VS ratios of 1.70–1.75. In the metasediments of the former accretionary prism the AVPs range from 3.7 % to 7.1 %, average P-wave velocities are 6.66–7.23 km/s and VP / VS ratios are 1.61–1.76. Continental crust which is incorporated in the collisional orogen shows AVP ranging from 1.4 % to 2.1 % with average P-wave velocities of 6.52–6.62 km/s and VP / VS ratios of 1.56–1.60. Our results suggest that mafic and felsic rocks in subduction zones at depth may be discriminated by a combination of seismic signatures: lower anisotropy and higher VP / VS ratio for mafic rocks, and higher anisotropy and lower VP / VS ratio for felsic rocks and metasediments.
21
Yanev, Slavcho. "Contribution to the elucidation of pre-Alpine evolution in Bulgaria (based on Sedimentological data from the marine Paleozoic)." Geologica Balcanica 22, no. 2 (April 30, 1992): 3–31. http://dx.doi.org/10.52321/geolbalc.22.2.3.
Повний текст джерелаАнотація:
Marine sediments of the slightly metamorphosed Paleozoic (Cambrian – Lower Ordovician?), Ordovician, Silurian, Devonian, Carboniferous and Permian have been characterized on the basis of main sections and of quantitative rock content investigations. The subduction and formation of the volcanic island arc had taken place before the Arenigian when the regarded lands were situated far to the south of the Balkan Peninsula. The foundation of the Bulgarian territories has a collage structure. Since the Arenigian an outlying sea had been formed as a vast basin with hemipelagic to pelate sedimentation and stages and zones of shallows and displayed marine streams, Humocky type stratification and even ceased sedimentation before the Silurian. During the Givetian the marginal basin had been transformed, the southern part being turned into an active continental edge, while the northern one kept the character of a passive part of the marginal basin. In the active area of the basin a system of a frontal arc, interarc basin, back arc and backarc basin was formed in the SW-NE direction. During the Sudetian events the most important stage of crust continentalization took place, accompanied by incorporation of granitoids and Alpine type Variscan orogeny (over the former arc) and Jurassic type folded lower region (over the former back sea). At the concluding stage of the Variscan development (Carboniferous – Permian) a collison occurred between the island arc and the young mobile platform, joined in collage manner to the Russian plate.
22
Hók, Jozef, Michal Kováč, Ondrej Pelech, Ivana Pešková, Rastislav Vojtko, and Silvia Králiková. "The Alpine tectonic evolution of the Danube Basin and its northern periphery (southwestern Slovakia)." Geologica Carpathica 67, no. 5 (October 1, 2016): 495–505. http://dx.doi.org/10.1515/geoca-2016-0031.
Повний текст джерелаАнотація:
AbstractThe tectonic evolution of the pre-Cenozoic basement, as well as the Cenozoic structures within the Danube Basin (DB) and its northern periphery are presented. The lowermost portion of the pre-Cenozoic basement is formed by the Tatricum Unit which was tectonically affected by the subduction of the Vahicum / Penninicum distal continental crust during the Turonian. Tectonically disintegrated Tatricum overlaid the post-Turonian to Lower Eocene sediments that are considered a part of the Vahicum wedge-top basin. These sediments are overthrust with the Fatricum and Hronicum cover nappes. The Danube Basin Transversal Fault (DBTF) oriented along a NW–SE course divided the pre-Neogene basement of the DB into two parts. The southwestern part of the DB pre-Neogene basement is eroded to the crystalline complexes while the Palaeogene and Mesozoic sediments are overlaid by the Neogene deposits on the northeastern side of the DBTF. The DBTF was activated as a dextral fault during the Late Oligocene – Earliest Miocene. During the Early Miocene (Karpatian – Early Badenian) it was active as a normal fault. In the Middle – Late Miocene the dominant tectonic regime with NW – SE oriented extension led to the disintegration of the elevated pre-Neogene basement under the simple and pure shear mechanisms into several NE – SW oriented horst and graben structures with successive subsidence generally from west to east. The extensional tectonics with the perpendicular NE – SW orientation of the Shminpersists in the Danube Basin from the ?Middle Pleistocene to the present.
23
MPOSKOS, E. "Petrology of the ultra-high pressure metamorphic Kimi complex in Rhodope (NE Greece). A new insight into the Alpine geodynamic evolution of Rhodope." Bulletin of the Geological Society of Greece 34, no. 6 (January 1, 2002): 2169. http://dx.doi.org/10.12681/bgsg.16860.
Повний текст джерелаАнотація:
Structural, penological and geochronological work has revealed that the Rhodope metamorphic province is a synmetamorphic nappe-system of Alpine age. The Kimi complex representing the uppermost entity underwent UHP metamorphism in Lower Cretaceous (>119 Ma). Diamond inclusions in garnet porphyroblasts, exsolutions of quartz rods and rutile needles in garnet from Grt-Ky-Bt-gneisses constrain pressures >4 GPa (probably -7 GPa) and temperatures > 1000 °C, indicating subduction of continental crust into the asthenospheric mantle. The garnet-spinel peridotite of the Kimi area represents a segment of upwelling asthenosphere reequilibrated into the lithospheric mantle wedge at -2.5 GPa and 1235 °C. The spinel-garnet clinopyroxenites, associated with the peridotite, represent HP mantle cumulates crystallized from a melt at similar P-T conditions (i.e. P-2.4 GPa, T~1200°C). Decompression and cooling took place in the mantle wedge within the Cr-Spinel peridotite field up to -1.8 GPa and 900 °C. Subsequent isobaric cooling crossed the stability field of garnet peridotite. At this stage, the peridotite was tectonically emplaced into the educted underlying continental crust. Three stages of exhumation of the crustal assemblage occurred in the Kimi Complex. The first stage, from the maximum depth of -200- 220 Km to -60 Km (P-1.6 GPa, T-800 °C), is characterized by slow cooling rates, indicating rapid exhumation. The second stage, from -60 Km to -38 Km (P-1.05 GPa, T~640°C), is indicated by cooling at slow rates and is characterized by hydration and annealing reequilibration/recrystallization processes. The third stage of exhumation started between 73 and 65 Ma and is characterized by rapid uplift, continuous influx of water, intrusion of muscovite pegmatites at -20 Km depth, and finally by rapid cooling at shallow levels. The Kimi Complex reached the surface before 48-42 Ma.
24
Jolivet, Laurent, Romain Augier, Claudio Faccenna, François Negro, Gaetan Rimmele, Philippe Agard, Cécile Robin, Federico Rossetti, and Ana Crespo-Blanc. "Subduction, convergence and the mode of backarc extension in the Mediterranean region." Bulletin de la Société Géologique de France 179, no. 6 (November 1, 2008): 525–50. http://dx.doi.org/10.2113/gssgfbull.179.6.525.
Повний текст джерелаАнотація:
Abstract 30-35 Ma ago a major change occurred in the Mediterranean region, from a regionally compressional subduction coeval with the formation of Alpine mountain belts, to extensional subduction and backarc rifting. Backarc extension was accompanied by gravitational spreading of the mountain belts formed before this Oligocene revolution. Syn-rift basins formed during this process above detachments and low-angle normal faults. Parameters that control the formation and the kinematics of such flat-lying detachments are still poorly understood. From the Aegean Sea to the Tyrrhenian Sea and the Alboran Sea, we have analysed onshore the deformation and P-T-t evolution of the ductile crust exhumed by extension, and the transition from ductile to brittle conditions as well as the relations between deep deformation and basin formation. We show that the sense of shear along crustal-scale detachments is toward the trench when subduction proceeds with little or no convergence (northern Tyrrhenian and Alboran after 20 Ma) and away from the trench in the case of true convergence (Aegean). We tentatively propose a scheme explaining how interactions between the subducting slab and the mantle control the basal shear below the upper plate and the geometry and distribution of detachments and associated sedimentary basins. We propose that ablative subduction below the Aegean is responsible for the observed kinematics on detachments (i.e. away from the trench). The example of the Betic Cordillera and the Rif orogen, where the directions of stretching were different in the lower and the upper crust and changed through time, is also discussed following this hypothesis.
25
Kästle, E. D., I. Molinari, L. Boschi, and E. Kissling. "Azimuthal anisotropy from eikonal tomography: example from ambient-noise measurements in the AlpArray network." Geophysical Journal International 229, no. 1 (November 1, 2021): 151–70. http://dx.doi.org/10.1093/gji/ggab453.
Повний текст джерелаАнотація:
SUMMARY Ambient-noise records from the AlpArray network are used to measure Rayleigh wave phase velocities between more than 150 000 station pairs. From these, azimuthally anisotropic phase-velocity maps are obtained by applying the eikonal tomography method. Several synthetic tests are shown to study the bias in the Ψ2 anisotropy. There are two main groups of bias, the first one caused by interference between refracted/reflected waves and the appearance of secondary wave fronts that affect the phase traveltime measurements. This bias can be reduced if the amplitude field can be estimated correctly. Another source of error is related to the incomplete reconstruction of the traveltime field that is only sparsely sampled due to the receiver locations. Both types of bias scale with the magnitude of the velocity heterogeneities. Most affected by the spurious Ψ2 anisotropy are areas inside and at the border of low-velocity zones. In the isotropic velocity distribution, most of the bias cancels out if the azimuthal coverage is good. Despite the lack of resolution in many parts of the surveyed area, we identify a number of anisotropic structures that are robust: in the central Alps, we find a layered anisotropic structure, arc-parallel at mid-crustal depths and arc-perpendicular in the lower crust. In contrast, in the eastern Alps, the pattern is more consistently E–W oriented which we relate to the eastward extrusion. The northern Alpine forleand exhibits a preferential anisotropic orientation that is similar to SKS observations in the lowermost crust and uppermost mantle.
26
Zucali, Michele, Daniel Chateigner, and and Bachir Ouladdiaf. "Crystallographic and Seismic Anisotropies of Calcite at Different Depths: A Study Using Quantitative Texture Analysis by Neutron Diffraction." Minerals 10, no. 1 (December 27, 2019): 26. http://dx.doi.org/10.3390/min10010026.
Повний текст джерелаАнотація:
Eight samples of limestones and marbles were studied by neutron diffraction to collect quantitative texture (i.e., crystallographic preferred orientations or CPO) of calcite deforming at different depths in the crust. We studied the different Texture patterns developed in shear zones at different depth and their influence on seismic anisotropies. Samples were collected in the French and Italian Alps, Apennines, and Paleozoic Sardinian basement. They are characterized by isotropic to highly anisotropic (e.g., mylonite shear zone) fabrics. Mylonite limestones occur as shear zone horizons within the Cenozoic Southern Domain in Alpine thrust-and-fold belts (Italy), the Briançonnais domain of the Western Alps (Italy-France border), the Sardinian Paleozoic back-thrusts, or in the Austroalpine intermediate units. The analyzed marbles were collected in the Carrara Marble, in the Austroalpine Units in the Central (Mortirolo) and Western Alps (Valpelline). The temperature and depth of development of fabrics vary from <100 ∘ C, to 800 ∘ C and depth from <10 km to about 30 km, corresponding from upper to lower crust conditions. Quantitative Texture Analysis shows different types of patterns for calcite: random to strongly textured. Textured types may be further separated in orthorhombic and monoclinic (Types A and B), based on the angle defined with the mesoscopic fabrics. Seismic anisotropies were calculated by homogenizing the single-crystal elastic tensor, using the Orientation Distribution Function calculated by Quantitative Texture Analysis. The resulting P- and S-wave anisotropies show a wide variability due to the textural types, temperature and pressure conditions, and dip of the shear planes.
27
Dabovski, Christo, Alexandra Harkovska, Borislav Kamenov, Bozhidar Mavrudchiev, Girgina Stanisheva-Vassileva, and Yotzo Yanev. "A geodynamic model of the Alpine magmatism in Bulgaria." Geologica Balcanica 21, no. 4 (August 30, 1991): 3–15. http://dx.doi.org/10.52321/geolbalc.21.4.3.
Повний текст джерелаАнотація:
The territory of Bulgaria covers part of the active continental margin of the Eurasian plate. Several first-order tectonic units may be distmguished: Moesian platform, paraautochthonous margin of the platform, zone of Mid-Mesozoic collage units, Late Cretaceous island-arc system and a system of Cenozoic collisional and post-collisional grabens. The Alpine magmatism is genetically related to the evolution of the Eurasian margin and the Tethyan ocean south of it. The earliest Alpine magmatic activity is represented by Triassic, basic and intermediate, strongly altered volcanics (NW Bulgaria, in boreholes). They are related to initial, embryonal rifting of the Moesian platform. The Triassic and Jurassic-Lower Cretaceous small bodies of basic volcamcs in the SE collage units are interpreted as ensimatic. During the Upper Cretaceous an ensialic island-arc system originated. The related intensive magmatism formed the Srednogoric volcano-intrusive zone (SVIZ). The magmatic rocks are products of complex differentiation processes. Their formation was accompanied by deep-water sedimentation. All magmatic groups, according to SiO2 content, occur. By the K2O/SiO2 ratio they belong to the TH, CA, HKCA, SH, HKTR (high-K transitional) and BG (bulgaritic) series. Longitudinal and transversal zonahties may be traced. In a global aspect SVIZ is one of the most ancient segments of the Alpine-Himalayan volcano-intrusive belt. The bulgaritic petrochemical trend is related to the earliest generation of K-cnriched magmas in the Mediterranean region. The products of the collisional magmatism are exposed in the Macedonian-Rhodope-North Aegean volcanic zone (MRNAVZ) located south of the Late Cretaceous island arc. It originated during the Eocene-Oligocene (37-25 Ma) as a result of the collision between Eurasia and the Apulian promontory of Africa. The magmatic rocks belong dominantly to the intermediate and acid groups and to the CA, HKCA and SH series. The distribution of intermediate and acid rocks in this zone is controlled by the thickness of the crust. In the Eastern and Central Rhodopes the K-content increases from south to north. The volcanic activity in the zone occurred in conditions of intensive block orogeny and was accompanied by terrigenous molasse sedimentation. During the Neogene a zone of transversal faulting developed in the collisional orogen (remainding of Himalayan-type orogen) and parts of the Moesian platform. This zone is marked by small bodies of basic and ultrabasic, Na-alkalinc and subalkalinc rocks. The K-content increases in southward direction, toward the collisional front.
28
Sheremeta, Petro, Andriy Nazarevych, and Lesya Nazarevych. "GEODYNAMICS." GEODYNAMICS 2(35)2023, no. 2(35) (December 2023): 106–28. http://dx.doi.org/10.23939/jgd2023.02.106.
Повний текст джерелаАнотація:
The purpose of the work is to present widely to the scientific community and analyze in detail the structure and oil and gas bearing of the Bukovyna lithosphere (the eastern part of the Carpathian region of Ukraine) based on the unique data on the regional RWМ-CDP profile RP-5 and on the neighboring regional profiles with the involvement of other geological and geophysical data. The methodology includes a detailed comprehensive analysis of the deep structure and oil and gas bearing and oil and gas prospects of the region and its separate zones based on seismic data on the regional profile RP-5 and nearby oil and gas bearing and oil and gas prospective areas with the involvement of a complex of geological and geophysical data. Results. In the zone of the profile RP-5, the occurrence of sedimentary strata and covers of the Folded Carpathians, the Carpathian foredeep and the edge of East-European craton in the earth's crust of Bukovyna was traced in detail, including the different depth tiers of the Carpathian thrusts and folds. The stepwise dipping of the edge of the East-European craton below the Carpathians is revealed here (generally similar to other segments of the Ukrainian Carpathians). The presence here of weakly dislocated autochthonous layers of Mesozoic rocks under the Carpathian thrusts is also established. In these horizons, several bands of folds of the Carpathian extension were discovered, some of them, in particular, the Lopushna fold, are associated with discovered oil and gas deposits. The thickening of the horizons of the lower crust under the axial part of the Bukovyna Folded Carpathians was revealed. In the pre-Carpathian part of the profile, there are 2 deepped ancient "seismofocal" zones of different age of formation and different vergence (researched in detail by S.G. Slonytska using special methods), as well as a number of apophysis-like intrusions. As a result of the comprehensive analysis, the influence of the characteristic features of the local Alpine geodynamic process was traced – the Alpine/Carpathian compression of the lithosphere in the northeast direction orthogonal to the Carpathians and the corresponding thrusts of the allochthon on the previously stepwise dipped here in the southwest direction western edge of the East-European craton as a result of rift-like pre-alpine geodynamic processes. Originality. The peculiarities of the deep structure, geodynamics, seismicity and oil and gas bearing of the Bukovyna lithosphere were determined based on the data of the regional profile RP-5, taking into account new data from oil and gas exploration studies in the subregion and data on various components of the geodynamic process in the whole Carpathian region of Ukraine. The oil and gas prospects of a number of deep folds of autochthonous Mesozoic rocks in the subthrust of the Pokuttya-Bukovyna Carpathians have been predicted and confirmed. Practical significance. The research results make it possible to more clearly justify the directions of oil and gas exploration in the subregion.
29
Little, Timothy A. "Transpressive ductile flow and oblique ramping of lower crust in a two-sided orogen: Insight from quartz grain-shape fabrics near the Alpine fault, New Zealand." Tectonics 23, no. 2 (April 2004): n/a. http://dx.doi.org/10.1029/2002tc001456.
Повний текст джерела
30
Assanelli, Matteo, Pietro Luoni, Gisella Rebay, Manuel Roda, and Maria Iole Spalla. "Tectono-Metamorphic Evolution of Serpentinites from Lanzo Valleys Subduction Complex (Piemonte—Sesia-Lanzo Zone Boundary, Western Italian Alps)." Minerals 10, no. 11 (November 5, 2020): 985. http://dx.doi.org/10.3390/min10110985.
Повний текст джерелаАнотація:
In the upper Tesso Valley the folded contact between Piemonte Zone ophiolites and Sesia-Lanzo Zone continental crust is exposed. Here serpentinites, metabasites, calcschists and fine-grained gneisses are deformed by four ductile superposed groups of structures, associated with different mineral assemblages. Different serpentinite lithologies have been recognized and studied in detail. Mylonitic D2 structures are pervasive and mineral assemblages point to re-equilibration at T of 450 ± 50 ∘C and P of 0.8 ± 0.3 GPa, under blueschist/epidote amphibolite-facies conditions. Pre-D2 structures and mineral assemblages are relics within S2 and indicate a re-equilibration under eclogite-facies conditions, at T of 570 ± 50 ∘C and P > 1.8 GPa. Post-D2 occurs under greenschist-facies conditions. Numerical modeling of a subduction zone allows exploration of the geodynamic context in which such PT path could have developed, and to make hypotheses about the possible timing of such a scenario, in agreement with the timing generally proposed for the Alpine subduction and collision. Model predictions indicate that pre-D2 mineral assemblages may have developed during Paleocene at 60–90 km depth and 115–145 km from the trench, or, alternatively, during lower Eocene at ca. 70–90 km depth, and 135–160 km from the trench.
31
Masson, Henri, François Bussy, Marc Eichenberger, Niels Giroud, Caroline Meilhac, and Sergei Presniakov. "Early Carboniferous age of the Versoyen ophiolites and consequences: non-existence of a “Valais ocean” (Lower Penninic, western Alps)." Bulletin de la Société Géologique de France 179, no. 4 (July 1, 2008): 337–55. http://dx.doi.org/10.2113/gssgfbull.179.4.337.
Повний текст джерелаАнотація:
Abstract Ophiolites occur at several places in the Lower Penninic of the W and Central Alps. They are generally ascribed to oceanic crust of a so-called “Valais ocean” of Cretaceous age which plays a fundamental role in many models of Alpine paleogeography and geodynamics. The type locality and only observational base for the definition of a “Valais ocean” in the W Alps is the Versoyen ophiolitic complex, on the French-Italian boundary W of the Petit St-Bernard col. The idea of a “Valais ocean” is based on two propositions that are since 40 years the basis for most reconstructions of the Lower Penninic: (1) The Versoyen forms the (overturned) stratigraphic base of the Cretaceous-Tertiary Valais-Tarentaise series; and (2) it has a Cretaceous age. We present new field and isotopic data that severely challenge both propositions. (1) The base of the Versoyen ophiolite is a thrust. It overlies a wildflysch with blocks of Versoyen rocks, named the Méchandeur Formation. This “supra-Tarentaise” wildflysch has been confused with an (overturned) stratigraphic transition from the Versoyen to the Valais-Tarentaise series. Thus the contact Versoyen/Tarentaise is not stratigraphic but tectonic, and the Versoyen ophiolite has no link with the Valais basin. This thrust corresponds to an inverse metamorphic discontinuity and to an abrupt change in tectonic style. (2) The contact of the Versoyen complex with the overlying Triassic-Jurassic Petit St-Bernard (PSB) series is stratigraphic (and not tectonic as admitted by all authors since 50 years). Several types of sedimentary structures polarize it and show that the PSB series is younger than the Versoyen. Consequently the Versoyen ophiolitic complex is Paleozoic and forms the basement of the PSB Mesozoic sediments. They both belong to a single tectonic unit, named the Versoyen-Petit St-Bernard nappe. (3) Ion microprobe U-Pb isotopic data on zircons from the main gabbroic intrusion in the Versoyen complex give a crystallization age of 337.0 ± 4.1 Ma (Visean, Early Carboniferous). These zircons show typical oscillatory zoning and no overgrowth or corrosion, and are interpreted to date the Versoyen magmatism. These U-Pb data are in excellent agreement with our field observations and confirm the Paleozoic age of the Versoyen ophiolite. The existence of a “Valais ocean” of Cretaceous age in the W Alps becomes very improbable. The eclogite facies metamorphism of the Versoyen-Petit St-Bernard nappe results from an Alpine intra-continental subduction, guided by a Paleozoic oceanic suture. This is an example of the long term influence of inherited deep-seated structures on a much younger orogeny. This might well be a major cause of the inherent complexity of the Alps.
32
Kocak, Kerim. "Mineralogy, geochemistry, and Sr–Nd isotopes of the Cretaceous leucogranite from Karamadazı (Kayseri), central Turkey: implications for their sources and geological setting." Canadian Journal of Earth Sciences 45, no. 8 (August 2008): 949–68. http://dx.doi.org/10.1139/e08-040.
Повний текст джерелаАнотація:
The leucogranite is the major constituent of the bimodal Late Cretaceous Karamadazı granitoid, developed in relation with evolution of the Inner Tauride Ocean along the northern margin of the Taurides in central Turkey. New analyses of minerals major and trace elements (including rare-earth elements (REE)), and of Sr and Nd isotopes are performed to determine the origin and geochemical characteristics of the leucogranites. Medium-coarse-grained leucogranite contains normally zoned plagioclase (An12–20), mildly alkaline biotite, and xenocrystic magneziohornblende, actinolite, and ferrohornblende. It is characterized by concave-up REE patterns with respect to middle–heavy REE. Field relations, mineral chemistry, geochemical data, and isotopic data suggest that the leucogranite could have originated from an amphibole-bearing igneous source in lower to middle crust by low-rate partial melting (<40%) under low pressure and low H2O activity conditions, possibly coupled by mixing–mingling with mafic magma and high-level feldspar and minor biotite fractionation. In contrast, the quartz diorite and mafic microgranular enclave (MME) are probably developed from an enriched mantle, with possible mingling–mixing. MME, quartz diorite, and leucogranite may represent a magmatic suite, which formed in an extensional tectonic regime by bimodal magmatic activity probably because of lithospheric delamination or slab break off or after the Alpine thicken within the Gondwanan Tauride–Anatolide platform. Initial Sr data exhibit an age of 65 ± 13 Ma for the leucogranite, but it does not indicate a true intrusion age of the magma due to isotopic modification of the magma.
33
Nouibat, A., L. Stehly, A. Paul, S. Schwartz, T. Bodin, T. Dumont, Y. Rolland, and R. Brossier. "Lithospheric transdimensional ambient-noise tomography of W-Europe: implications for crustal-scale geometry of the W-Alps." Geophysical Journal International 229, no. 2 (December 24, 2021): 862–79. http://dx.doi.org/10.1093/gji/ggab520.
Повний текст джерелаАнотація:
SUMMARY A full understanding of the dynamics of mountain ranges such as the Alps requires the integration of available geological and geophysical knowledge into a lithospheric-scale 3-D geological model. As a first stage in the construction of this geo-model, we derive a new 3-D shear wave velocity model of the Alpine region, with a spatial resolution of a few tens of kilometres, making it possible to compare with geological maps. We use four years of continuous vertical-component seismic noise records to compute noise correlations between more than 950 permanent broad-band stations complemented by ∼600 temporary stations from the AlpArray sea-land seismic network and the Cifalps and EASI linear arrays. A specific pre-processing is applied to records of ocean–bottom seismometers in the Liguro-Provençal basin to clean them from instrumental and oceanic noises. We first perform a 2-D transdimensional inversion of the traveltimes of Rayleigh waves to compute group-velocity maps from 4 to $150\, \mathrm{ s}$. The data noise level treated as an unknown parameter is determined with a Hierarchical Bayes method. A Fast Marching Eikonal solver is used to update ray path geometries during the inversion. We use next the group-velocity maps and their uncertainties to derive a 3-D probabilistic Vs model. The probability distributions of Vs at depth and the probability of presence of an interface are estimated at each location by exploring a set of 130 million synthetic four-layer 1-D Vs models. The obtained probabilistic model is refined using a linearized inversion. Throughout the inversion for Vs, we include the water column where necessary. Our Vs model highlights strong along-strike changes of the lithospheric structure, particularly in the subduction complex between the European and Adriatic plates. In the South-Western Alps, our model confirms the existence of a low-velocity structure at $50-80\, \mathrm{ km}$ depth in the continuation of the European continental crust beneath the subduction wedge. This deep low-velocity anomaly progressively disappears towards the North-Western and Central Alps. The European crust includes lower crustal low-velocity zones and a Moho jump of $\sim \, 8-12$ km beneath the western boundary of the External Crystalline Massifs of the North-Western Alps. The striking fit between our Vs model and the receiver function migrated depth section along the Cifalps profile documents the reliability of the Vs model. In light of this reliability and with the aim to building a 3-D geological model, we re-examine the geological structures highlighted along the Cifalps profile.
34
Skuzovatov, Sergei Y. "Differential Fluid Activity in a Single Exhumed Continental Subduction Unit from Local P-T-M(H2O) Records of Zoned Amphiboles (North Muya, Eastern Siberia)." Minerals 12, no. 2 (February 8, 2022): 217. http://dx.doi.org/10.3390/min12020217.
Повний текст джерелаАнотація:
The behavior of the continental lithosphere in the Alpine-type subduction zones, which primarily depends on its thickness, thermal regime of subduction and availability of fluids/melts, remains an important issue for both metamorphic petrology and geochemistry as well as for resolving the thermomechanical properties of subduction paleo-interfaces. Rehydrated (amphibole- and zoisite-bearing) eclogites from the Neoproterozoic North Muya high-pressure complex (northern Central Asian Orogenic belt, eastern Siberia) were studied in order to assess their peak burial depths, degree of prograde dehydration, and further retrograde hydration extent within a subducted and exhumed continental unit. Three medium-grained eclogites from different localities of HP complex show similarly dry peak assemblages of pyrope-almandine-grossular garnet (XGrs up to 0.30, XPrp up to 0.25) + Na-rich omphacite (up to 44 mol % of jadeite) + rutile + quartz, which are variably replaced by secondary plagioclase + clinopyroxene ± amphibole symplectitic aggregate. The eclogites were subjected to burial at similar peak depths (up to ~17–21 kbar) but different peak temperatures (within ~600–730 °C) with or without notable heating and re-equilibration due to crustal thickening. Variable degrees of exhumation-induced pervasive rehydration led to growth of individual zoned porphyroblastic barroisite-hornblende amphibole ([B]Na = 0.03–0.45) ± zoisite over the primary eclogitic assemblage or after notable thermally-driven development of symplectitic aggregate after omphacite. Amphibole compositions together with the zoisite presence/absence in different samples reflect continuous rehydration by addition of ~0.5–1.5 wt.% at different exhumation conditions, from nearly peak eclogitic P–T (~17–21 kbar) to granulite- and amphibolite-facies depths within the plagioclase stability field (<14 kbar). This diversity most likely required irregular distribution of internally sourced, low-volume, hydrous metamorphic fluid (i.e., from host felsic rocks or metasediments) acting at different depths of the subduction interface. From the performed PTX calculations, I suggest that nearly isochemical (i.e., without any significant modification of the bulk-rock composition other than incorporation of additional H2O), retrograde hydration by only at lower- to middle-crust conditions did not significantly influence the density and the rheology of the subducted continental slices due to both (1) a limited abundance of dense metabasic rocks, which are commonly more fluid-rich (e.g., due to chlorite or amphibole alteration), and (2) the initially dry nature of mafic and felsic continental rocks. The limited dehydration and rehydration scales exemplified by the North Muya eclogites and therefore low availability of hydrous metamorphic fluids may have accounted for the high buoyancy of the eclogitic crust and explained the absence of contemporaneous suprasubduction magmatism in the regional context at ca. ~630 Ma.
35
Merle, Olivier, and Laurent Michon. "The formation of the West European Rift; a new model as exemplified by the Massif Central area." Bulletin de la Société Géologique de France 172, no. 2 (March 1, 2001): 213–21. http://dx.doi.org/10.2113/172.2.213.
Повний текст джерелаАнотація:
Abstract In this paper, we use mainly field data from the Massif Central area, which have been presented in a companion paper [Michon and Merle, 2001], to discuss the origin and the evolution of the West European Rift system. It is shown that the tectonic event in the Tertiary is two-stage. The overall geological evolution reveal a tectonic paradox as the first stage strongly suggests passive rifting, whereas the second stage displays the first stage of active rifting. In the north, crustal thinning, graben formation and sedimentation at sea level without volcanism during the Lower Oligocene, followed by scattered volcanism in a thinned area during Upper Oligocene and Lower Miocene, represent the classical evolution of a rift resulting from extensional stresses within the lithosphere (i.e. passive rifting). In the south, thinning of the lithospheric mantle associated with doming and volcanism in the Upper Miocene, together with the lack of crustal thinning, may be easily interpreted in terms of the first stage of active rifting due to the ascent of a mantle plume. This active rifting process would have been inhibited before stretching of the crust, as asthenospheric rise associated with uplift and volcanism are the only tectonic events observed. The diachronism of these two events is emphasized by two clearly distinct orientations of crustal thinning in the north and mantle lithospheric thinning in the south. To understand this tectonic paradox, a new model is discussed taking into account the Tertiary evolution of the Alpine chain. It is shown that the formation of a deep lithospheric root may have important mechanical consequences on the adjacent lithosphere. The downward gravitational force acting on the descending slab may induce coeval extension in the surrounding lithosphere. This could trigger graben formation and laguno-marine sedimentation at sea level followed by volcanism as expected for passive rifting. Concurrently, the descending lithospheric flow induces a flow pattern in the asthenosphere which can bring up hot mantle to the base of the adjacent lithosphere. Slow thermal erosion of the base of the lithosphere may lead to a late-stage volcanism and uplift as expected for active rifting.
36
Zheng, Yong-Fei, and Ren-Xu Chen. "Extreme metamorphism and metamorphic facies series at convergent plate boundaries: Implications for supercontinent dynamics." Geosphere 17, no. 6 (November 1, 2021): 1647–85. http://dx.doi.org/10.1130/ges02334.1.
Повний текст джерелаАнотація:
Abstract Crustal metamorphism under extreme pressure-temperature conditions produces characteristic ultrahigh-pressure (UHP) and ultrahigh-temperature (UHT) mineral assemblages at convergent plate boundaries. The formation and evolution of these assemblages have important implications, not only for the generation and differentiation of continental crust through the operation of plate tectonics, but also for mountain building along both converging and converged plate boundaries. In principle, extreme metamorphic products can be linked to their lower-grade counterparts in the same metamorphic facies series. They range from UHP through high-pressure (HP) eclogite facies to blueschist facies at low thermal gradients and from UHT through high-temperature (HT) granulite facies to amphibolite facies at high thermal gradients. The former is produced by low-temperature/pressure (T/P) Alpine-type metamorphism during compressional heating in active subduction zones, whereas the latter is generated by high-T/P Buchan-type metamorphism during extensional heating in rifting zones. The thermal gradient of crustal metamorphism at convergent plate boundaries changes in both time and space, with low-T/P ratios in the compressional regime during subduction but high-T/P ratios in the extensional regime during rifting. In particular, bimodal metamorphism, one colder and the other hotter, would develop one after the other at convergent plate boundaries. The first is caused by lithospheric subduction at lower thermal gradients and thus proceeds in the compressional stage of convergent plate boundaries; the second is caused by lithospheric rifting at higher thermal gradients and thus proceeds in the extensional stage of convergent plate boundaries. In this regard, bimodal metamorphism is primarily dictated by changes in both the thermal state and the dynamic regime along plate boundaries. As a consequence, supercontinent assembly is associated with compressional metamorphism during continental collision, whereas supercontinent breakup is associated with extensional metamorphism during active rifting. Nevertheless, aborted rifts are common at convergent plate boundaries, indicating thinning of the previously thickened lithosphere during the attempted breakup of supercontinents in the history of Earth. Therefore, extreme metamorphism has great bearing not only on reworking of accretionary and collisional orogens for mountain building in continental interiors, but also on supercontinent dynamics in the Wilson cycle.
37
Bigot-Cormier, Florence, Françoise Sage, Marc Sosson, Jacques Déverchère, Michelle Ferrandini, Pol Guennoc, Michel Popoff, and Jean-François Stéphan. "Pliocene deformation of the north-Ligurian margin (France) : consequences of a south-Alpine crustal thrust." Bulletin de la Société Géologique de France 175, no. 2 (March 1, 2004): 197–211. http://dx.doi.org/10.2113/175.2.197.
Повний текст джерелаАнотація:
Abstract Introduction.– The Oligo-Miocene extension phase of the Mediterranean basins rifting (30–25 Ma) [Jolivet and Faccenna, 2000] followed by the Ligurian basin oceanic crust formation (21–18 Ma) [Le Pichon et al., 1971 ; Réhault et al., 1984 ; Carminati et al., 1998 ; Gueguen et al., 1998] occurred during the western Alps compression phase. The deformations were characterised during the Miocene by the southwestward structuration of the Castellane Arc [Fallot and Faure-Muret, 1949 ; Laurent et al., 2000] and during the Mio-Pliocene by the southward structuration of the Nice Arc. This latter arc is bounded on its western side by a dextral strike-slip fault and on its southern side by a thrust inducing an uplift of this arc [Ritz, 1991 ; Guglielmi and Dubar, 1993 ; Clauzon et al., 1996 ; Guardia et al., 1996 ; Schroetter, 1998]. Fission tracks thermochronology data [Bigot-Cormier et al., 2000] suggest a general uplift at ~3.5 Ma of the Argentera massif. Stratigraphical [Irr, 1984 ; Hilgen, 1991 ; Hilgen and Langereis, 1988, 1993] and geomorphological studies [Clauzon et al., 1996 b ; Dubar and Guglielmi, 1997] show evidences for an uplift of the Ligurian coast increasing east of the Var river. The analysis of 70 seismic-reflection profiles allows us to better characterise and quantify the deformation from Antibes to Imperia (fig. 1). We then reconstruct vertical motions in space and time since the Messinian crisis in order to propose a deformation model of the margin related to crustal thickening. Morpho-structural and sedimentary characteristics of the margin. – The morphology of the margin results both from the Oligocene rifting and the Messinian crisis (5.8–5.3 Ma) characterised by a sea level fall of ~1500 m. At the surface, the margin, with a steep mean slope of 6–8o near Antibes [Réhault, 1981] to 12o near Imperia [Savoye and Piper, 1991], is cut by several canyons. At depth, there are two or three tilted blocks covered by Mesozoic sediments and in the Imperia area by the Helminthoïd Flyschs [Sosson et al., 1998]. In the basin, above the Miocene units, we observe some lower evaporites at the bottom, the Messinian salt in the middle and upper evaporites (E) marking the end of the low sea level 5.32 Ma ago [Ryan et al., 1973 ; Mauffret et al., 1973 ; Réhault 1981 ; Savoye and Piper, 1991]. The sedimentary series ends with 1500 m thick of Plio-Quaternary units [Gennesseaux and Le Calvez, 1960 ; Sosson et al., 1998]. At the top of the margin, we observe an erosion surface while toward the basin, two units are evidenced : the Messinian fan (CYL 30–05, fig. 2) unconformity, covered by a seismic facies similar to the one of the upper evaporites in the basin. The “M” surface, that relates the erosional surface of the margin and the upper evaporites of the basin, has a regular slope toward the basin (fig. 3). We will use this surface as a stratigraphic and structural reference for this work. Acquisition and methodology. – We analysed 12 profiles from the MALIGU cruise (1993–1994) [Chaumillon et al., 1994] and ~ 60 from several cruises (1992–2001) with the “Tethys” oceanographic ship to synthesize all stratigraphic and structural observations along the margin. In this paper, we only present 12 of them. We quantify the deformation at the margin/basin limit with a velocity gradient [Le Douaran et al., 1984 ; Rollet, 1999 ; Contrucci et al., 2001] on 50 profiles and we propose a deformation chronology using the “M” surface. Evidence for Pliocene deformation – Between Antibes and the east of Nice : there is no deformation of the “M” surface (fig. 3). – Between the east of Nice and the west of Menton : we observe a deformation at the top of the margin characterised by tilted seismic reflectors (fig. 4A). According to the micro-paleontology study, this deformation is dated at the Lower-Upper Pliocene limit. – From the west of Menton to San Remo : the deformation, observed in the middle of the margin, is characterised by a tilted Messinian fan and the formation of small basins (fig. 4A,B). We note that this deformation increases when the margin strikes ENE-WSW. – From San Remo to Imperia : the deformation increases from the middle to the base of the margin (fig. 4B). The apparent normal throw estimated at ~ 500 m near Antibes increases up to more than 2000 m near Imperia since ~ 5 Ma (fig. 5). This deformation induced (i) the formation of a piggy-back basin located near Imperia, (ii) a decrease of the “M” surface slope with at places a slope inversion compared with the Antibes area (fig. 4B). Space and time reconstitution of vertical motions. – In order to better visualise the geometry of the structure of the margin, we drew seismic profiles with no exaggeration. We interpret the observations seen above and the fact that normal faults on the rifted tilted blocks show a slope between 45–30o as the occurrence of a blind thrust (fig. 6). Motion along the thrusting plane induces the rotation of tilted blocks and is responsible for the margin uplift during the Lower-Upper Pliocene limit following a book-shelf mechanism [Mandl, 1987 ; Jackson and McKenzie, 1983]. At the bottom of the margin, we therefore interpret the apparent normal fault as a gravitary sliding (fig. 7) which enhances the front of the thrust vanishing in the Messinian salt unit. Discussion – Comparison between this model and others previously proposed : contrary to the model proposed by Chaumillon et al. [1994], we can explain the uplift of the margin and the presence of the “normal” faults at the limit margin/basin, only with one mechanism of crustal compression. This mechanism clearly comes from onshore and not from offshore as suggested by Béthoux et al. [1992]. The thrust, dipping toward the continent, can be observed on multichanel seismic reflection profiles [Rollet, 1999] (fig. 8). – The compression of the margin since the end of the lower-Pliocene : our results are chronologically and geometrically in agreement with reversal faults dipping toward the continent, observed along Cap Mele (fig. 1) at the bottom of the Pliocene units [Réhault, 1981]. Both, the important thickness of the Plio-Quaternary sediments near Imperia, far away from the Var river, and the many salt diapirs in the NE area, are consistent with a thrust motion. – The area Argentera massif-Ligurian margin : according to fission track data [Bigot-Cormier et al., 2000] a major uplift was detected at ~3.5 Ma. At the same time, the Ligurian margin recorded a compressive phase with a structural geometry consistent with the deformation onshore (fig. 9). The deformation on the thrust front is the most important at the axis of the main structures of the Argentera. This thrust front is located at the base of the margin near Imperia and propagated toward the top close to the western edge of the Nice arc (fig. 10). Our observations suggest that the deformations propagate offshore in relation with the advance of the Alpine front toward the south. Conclusion. – The analysis of 70 seismic reflection profiles based on stratigraphic and structural studies allows us to quantify and date the deformation of the Ligurian margin increasing eastward. This deformation dated at the Lower-Upper Pliocene limit is due to the propagation of a blind thrust front consistent with the basement tectonic deformation of this period reactivating the Oligocene rifting structures.
38
Popov, Petko, Tudor Berza, Alexander Grubic, and Dumitru Ioane. "Late Cretaceous Apuseni-Banat-Timok-Srednogorie (ABTS) magmatic and metallogenic belt in the Carpathian-Balkan orogen." Geologica Balcanica 32, no. 2-4 (December 30, 2002): 145–63. http://dx.doi.org/10.52321/geolbalc.32.2-4.145.
Повний текст джерелаАнотація:
The Apuseni-Banat-Timok-Srednogorie (ABTS) Magmatic and Metallogenic Belt can be traced from the Apuseni Mountains in the north, through the western part of the South Carpathians (Banat) in Romania, the Timok region in East Serbia, the Srednogorie zone (Bulgaria) and continues in Turkey through the Black Sea. The basement belongs to the southern margin of the European continent. The ABTS Belt is unconformly superimposed on older structures, including the Early Cretaceous ones. Furthermore, it crosses the Vardar ophiolite suture in the Mures and Voevodina regions. These facts indicate a new stage in the alpine evolution which followed the subduction of the Vardar Ocean and subsequent collision. This new stage was characterized by an extensional geodynamic regime. The ABTS arcuate rift was formed as a result of postcollisional orogenic collapse. The Late Cretaceous magmatic activity with submarine volcanic rocks and comagmatic intrusions began during the Cenomanian and ended during the Maastrichtian. Volcanic and associated predominantly flysch-type sedimentary deposits form a 2-3 to 7-8 km thick pile. The magma generation in ABTS extensional belt was realized in different depth level, which determines differences of melt compositions. Rock association of calc-alkaline, tholeitic, subalkaline and alkaline series are established. The petrologic features of the alkaline and subalkaline rocks and several Sr isotope analyses show the mantle origin of the parent magma. The calc-alkaline magma was generated predominantly around the boundary between mantle and lower crust. Porphyry copper and copper massive sulphide deposits are the most important. Some of them have an economical content of gold and/or molybdenum. There are skarn and vein type copper deposits, too. Other important deposits are iron, tungsten-molybdenum and lead-zinc skarn deposits. Besides, small hydrothermal base metal-gold, barite, porphyry gold, silver and volcano-sedimentary iron-manganese deposits are known. The plutonic, subvolcano-plutonic, volcano-plutonic, volcano-subvolcanic and volcanic ore-bearing structures are distinguished. The geochemical associations show the predominance of mantle sources of the ore-forming fluids.
39
Guryanov, S. A. "Structural and tectonic conditions for the development of the Bering Sea sedimentary basin." Proceedings of higher educational establishments. Geology and Exploration, no. 4 (November 14, 2022): 54–63. http://dx.doi.org/10.32454/0016-7762-2022-64-4-54-63.
Повний текст джерелаАнотація:
Introduction. In order to characterize the oil and gas potential of any area under exploration, its structural and tectonic evolution should be studied. In this paper, a structural and tectonic modelling of the Bering Sea is carried out.Aim. To identify the structural and tectonic characteristics of the Bering Sea by interpreting the results obtained during a geodynamic analysis of sedimentary basin formation, based on the tectonic and geodynamic paleoreconstructions and sedimentary basin modelling of the Bering Sea.Materials and methods. A structural and tectonic modelling of the Bering Sea sedimentary basins was carried out using contemporary methods of basin analysis and numerical geological modelling (PetroMod software, Schlumberger). Three-dimensional time-spatial structural-tectonic models of the Bering Sea were formed using the bottom structural maps of Pliocene-Quaternary deposits, near the Lower Miocene and Oligocene tops and along the acoustic basement bottom. Maps were digitalized and converted to grids (with a 500-m step), in which the discrepancies (intersections) were removed taking into account the available geological and geophysical data (seismogeological sections). The contemporary surface of sedimentary basins was constructed by the connection of bathymetric and topographic maps. The beginning and end time of sedimentary accumulation periods was determined in accordance with the international stratigraphic scale.Results. The performed study identified the sufficiently continuous development areas of the oceanic or suboceanic crust of deep-water (back-arc) basins, aged from the Upper Jurassic-Cretaceous to the Cenozoic and repeatedly affected by the subsequent phases of the tectonic and magmatic activation; development belts of the Cretaceous-Cenozoic block-magmatic basement of island arcs, locally including reformed basement blocks of an older, Paleozoic or Cimmerian, consolidation; extensive depth-differentiated alpine/newest (syn-oceanic) shelf platforms, occassionally partially destroyed due to the latest destruction, including blocks or large blocks of Pre-Cambrian or Paleozoic relatively rigid massifs in the structure of their base.Conclusion. The modelling results indicate the deeply submerged West Anadyr, East Anadyr and Central Anadyr basins to be possible depocentres with their own hydrocarbon generation centres.
40
ERKÜL, FUAT. "Tectonic significance of synextensional ductile shear zones within the Early Miocene Alaçamdağ granites, northwestern Turkey." Geological Magazine 147, no. 4 (December 4, 2009): 611–37. http://dx.doi.org/10.1017/s0016756809990719.
Повний текст джерелаАнотація:
AbstractSynextensional granitoids may have significant structural features leading to the understanding of the evolution of extended orogenic belts. One of the highly extended regions, the Aegean region, includes a number of metamorphic core complexes and synextensional granitoids that developed following the Alpine collisional events. The Alaçamdağ area in northwestern Turkey is one of the key areas where Miocene granites crop out along the boundary of various tectonic units. Structural data from the Early Miocene Alaçamdağ granites demonstrated two different deformation patterns that may provide insights into the development of granitic intrusions and metamorphic core complexes. (1) Steeply dipping ductile shear zones caused emplacement of syn-tectonic granite stocks; they include kinematic indicators of a sinistral top-to-the-SW displacement. This zone has also juxtaposed the İzmir–Ankara Zone and the Menderes Massif in the west and east, respectively. (2) Gently dipping ductile shear zones have developed within the granitic stocks that intruded the schists of the Menderes Massif on the structurally lower parts. Kinematic data from the foliated granites indicate a top-to-the-NE displacement, which can be correlated with the direction of the hanging-wall movement documented from the Simav and Kazdağ metamorphic core complexes. The gently dipping shear zones indicate the presence of a detachment fault between the Menderes Massif and the structurally overlying İzmir–Ankara Zone. Mesoscopic- to map-scale folds in the shallow-dipping shear zones of the Alaçamdağ area were interpreted to have been caused by coupling between NE–SW stretching and the accompanying NW–SE shortening of ductilely deformed crust during Early Miocene times. One of the NE-trending shear zones fed by granitic magmas was interpreted to form the northeastern part of a sinistral wrench corridor which caused differential stretching between the Cycladic and the Menderes massifs. This crustal-scale wrench corridor, the İzmir–Balıkesir transfer zone, may have controlled the asymmetrical and symmetrical extensions in the orogenic domains. The combination of the retreat of the Aegean subduction zone and the lateral slab segmentation leading to the sinistral oblique-slip tearing within the Eurasian upper plate appears to be a plausible mechanism for the development of such extensive NE-trending shear zones in the Aegean region.
41
DEGTYAREVA, Tatyana, and Yuri KARAEV. "REGULARITIES OF THE MICROELEMENT COMPOSITION FORMATION OF SOILS UNDER THE MOUNTAIN-MEADOW VEGETATION OF THE GREATER CAUCASUS." Sustainable Development of Mountain Territories 13, no. 3 (September 30, 2021): 343–51. http://dx.doi.org/10.21177/1998-4502-2021-13-3-343-351.
Повний текст джерелаАнотація:
Report. The purpose of the work is to identify the features of the formation of the microelement composition of soils under the mountain meadow vegetation of the Greater Caucasus based on the analysis of literary materials and the results of our own field research. Methods. The study of the microelement composition of soils under subalpine and alpine vegetation was carried out on the territory of the Teberdinsky State Biosphere Reserve. Traditional methods of soil-geochemical studies were used with the laying of soil sections, the selection of soil samples and their analysis for the content of four trace elements (Zn, Cu, Pb and Cd). Determination of trace elements was carried out by voltammetric and atomic absorption methods. The humus content was determined by the Tyurin method with wet salting, the pH of the water extract was determined potentiometrically. Statistical processing of the obtained data was performed in the Statistica 10 program. The microelement composition of soil-forming rocks was compared with the clarks of chemical elements in the upper part of the continental crust; the microelement composition of mountain-meadow soils was compared with the clarks of the soils of the world. The radial distribution of trace elements in the soil profile was analyzed. The qualitative trace element composition of soils was characterized as a sequence of decreasing the content of trace elements in the humus horizon. Results. It is established that the microelement composition of soils under the mountain-meadow vegetation of the Western Caucasus is formed under specific conditions that affect the course of soil processes. High solar insolation, low temperatures, intensive humidification throughout the year affects the features of the processes of humification, the formation of clay minerals in the soil and other products of intra-soil weathering. The predominance of acid hydrolysis processes leads to the predominant accumulation of aluminosilicates, Fe hydroxides, chelated organomineral complexes in the soil profile, which play a leading role in the binding of trace elements. The microelement composition of mountain-meadow soils under subalpine vegetation is formed with more intensive processes of humus formation and oglinivaniya. These soils are characterized by a more pronounced biogenic accumulation of Cu and Zn in the humus horizon, the illuvial nature of the Cd distribution is more pronounced. The microelement composicomposition of mountain-meadow soils under alpine and rock-scree vegetation is formed against the background of relatively weakened processes of humus formation, humus accumulation and oglinivaniya. This affects the lower intensity of biogenic accumulation of trace elements, their leaching into the lower part of the profile. Conclusions. The main regularities of the formation of the microelement composition of mountain-meadow soils are determined by the special conditions in which these soils develop. The fixation of trace elements in mountain-meadow soils occurs mainly on aluminosilicates, Fe, Mn hydroxides and chelated organomineral complexes, which largely form the silty fraction. The movement of silty particles along the soil profile leads to the redistribution of trace elements associated with them. The granulometric composition, which is an indicator of the content of the silty fraction and its distribution along the soil profile, is of great importance when characterizing the microelement composition of mountain meadow soils. The established regularities of the formation of the microelement composition of mountain-meadow soils allow us to determine the main directions of economic activity that will contribute to the preservation of their ecological state. This is, first of all, the rational use of pasture resources of mountain meadows with the introduction of a system of alternating mowing, changing the main pastures with spare ones during the year for their restoration. An important component should be monitoring changes in the trace element composition of mountain meadow soils, which will allow timely response to changes and make adjustments to the structure of the use of these soils.
42
Jansing, Lukas, Lukas Papritz, Bruno Dürr, Daniel Gerstgrasser, and Michael Sprenger. "Classification of Alpine south foehn based on 5 years of kilometre-scale analysis data." Weather and Climate Dynamics 3, no. 3 (September 26, 2022): 1113–38. http://dx.doi.org/10.5194/wcd-3-1113-2022.
Повний текст джерелаАнотація:
Abstract. It has long been recognized that a rich variety of Alpine south-foehn flavours exist that are related to varying flow conditions above crest level, the presence and intensity of orographic precipitation on the Alpine south side, and the Po Valley stratification. This study presents a systematic 5-year climatology of different foehn types. The classification relies on 2329 foehn hours, which are diagnosed using a station-based foehn index for Altdorf in the Swiss Reuss Valley. Operational analyses at 1 km horizontal resolution are employed to classify foehn hours with a decision tree that is based on foehn forecasting experience. Mean wind direction and speed in a circle with 100 km radius centred around Altdorf are considered to differentiate between three main foehn types (deep foehn, shallow foehn, gegenstrom foehn). In addition, upstream precipitation and its extent beyond the Alpine crest are used to distinguish three deep-foehn subtypes (dry foehn, moist foehn, dimmer foehn). The main foehn types differ distinctively in the synoptic conditions over the Alps. During deep foehn, pronounced southwesterlies ahead of an upper-level trough induce upstream orographic precipitation. Shallow foehn, in turn, is associated with cross-Alpine temperature differences that provoke a gap flow. The gegenstrom-foehn type is also restricted to major gaps, but a strong westerly flow prevails above crest level. The deep-foehn subtypes primarily differ in terms of the upper-level trough. While a weaker trough and the influence of an upper-level ridge over the Mediterranean inhibit precipitation (dry foehn), a deeper trough which is closer to the Alps induces stronger crest-level winds and intense precipitation on the Alpine south side (dimmer foehn). The different foehn types are found to strongly affect the local characteristics at Altdorf, which are investigated using station measurements. Backward trajectories from Altdorf are calculated for each of the foehn hours and used to define three clusters of air parcels depending upon their upstream thermodynamic evolution. Trajectories in cluster 1 are diabatically heated and transported within a low-level easterly barrier jet in the Po Valley prior to their ascent to crest level. They constitute the main precipitating airstream and, hence, are of key importance for moist foehn and dimmer foehn. Cluster-2 and cluster-3 trajectories are subject to weak diabatic heating or even diabatic cooling. They originate from southerly to southwesterly regions and from either slightly below or above crest level. Accordingly, these air parcels are associated with little to no precipitation, and as such, they take a key role for dry foehn, shallow foehn and gegenstrom foehn. Furthermore, these three foehn types feature a pronounced stable layer over the Po Valley, which, to some extent, inhibits air parcels to ascend from lower levels. In summary, the study introduces a systematic classification of south foehn using state-of-the-art data sets. It concludes by setting the new classification into a historic context and revisiting the rich body of literature with respect to different Alpine south-foehn types. In particular, analogies to and discrepancies with the existing conceptual models of “Swiss foehn” and “Austrian foehn” are discussed.
43
Haeberli, Wilfried, Regula Frauenfelder, Andreas Kääb, and Stephan Wagner. "Characteristics and potential climatic significance of “miniature ice caps” (crest- and cornice-type low-altitude ice archives)." Journal of Glaciology 50, no. 168 (2004): 129–36. http://dx.doi.org/10.3189/172756504781830330.
Повний текст джерелаАнотація:
AbstractLong-term ice-core records of Alpine glaciers are usually taken from cold-firn areas at high altitudes, as on Mont Blanc and Monte Rosa. Perennial ice bodies at lower altitudes, however, also bear information about the past. Recent findings from the remains of such ice (the Oetztal iceman found in Austria; wooden bows at Lötschen Pass, Switzerland) clearly indicate the hitherto little-recognized fact that small, more-or-less static perennial ice bodies which are cold and frozen to the underlying bedrock may contain very old ice and, hence, important palaeoclimatic information about warm periods with minimum ice extent in the Alps. Since autumn 1998, investigations have been initiated on a crest-type location or “miniature ice cap” at Piz Murtèl, Engadine, Swiss Alps. First results from shallow drilling, temperature data-logging, geodetic surveying, visual observation, finite-element modelling of simplified basic two-dimensional configurations and comparison to earlier measurements at similar sites provide promising perspectives concerning a little-studied phenomenon with considerable scientific-environmental research potential. Specific characteristics of the investigated site, and probably of many other comparable mountain sites, are: cold ice (about –4°C at 10 m depth), no basal sliding, small mass turnover, striking lack of a firn zone, accumulation mainly by superimposed ice, and direct access to old layers (centuries, millennia?) at the ice/bedrock interface.
44
Heggberget, Thrine Moen, Eldar Gaare, and John P. Ball. "Reindeer (Rangifer tarandus) and climate change: Importance of winter forage." Rangifer 22, no. 1 (June 1, 2002): 13. http://dx.doi.org/10.7557/2.22.1.388.
Повний текст джерелаАнотація:
As a consequence of increasing greenhouse gas concentrations, climate change is predicted to be particularly pronounced, although regionally variable, in the vast arctic, sub-arctic and alpine tundra areas of the northern hemisphere. Here, we review winter foraging conditions for reindeer and caribou (Rangifer tarandus) living in these areas, and consider diet, forage quality and distribution, accessibility due to snow variation, and effects of snow condition on reindeer and caribou populations. Finally, we hypothesise how global warming may affect wild mountain reindeer herds in South Norway. Energy-rich lichens often dominate reindeer and caribou diets. The animals also prefer lichens, and their productivity has been shown to be higher on lichen-rich than on lichen-poor ranges. Nevertheless, this energy source appears to be neither sufficient as winter diet for reindeer or caribou (at least for pregnant females) nor necessary. Some reindeer and caribou populations seem to be better adapted to a non-lichen winter diet, e.g. by a larger alimentary tract. Shrubs appear to be the most common alternative winter forage, while some grasses appear to represent a good, nutritionally-balanced winter diet. Reindeer/caribou make good use of a wide variety of plants in winter, including dead and dry parts that are digested more than expected based on their fibre content. The diversity of winter forage is probably important for the mineral content of the diet. A lichen-dominated winter diet may be deficient in essential dietary elements, e.g. minerals. Sodium in particular may be marginal in inland winter ranges. Our review indicates that most Rangifer populations with lichen-dominated winter diets are either periodically or continuously heavily harvested by humans or predators. However, when population size is mainly limited by food, accessible lichen resources are often depleted. Plant studies simulating climatic change indicate that a warmer, wetter climate may cause an altitudinal upward shift in the production of mat-forming lichens in alpine, sub-arctic regions. This is due to an increased potential for lichen growth at high altitudes, combined with increased competition from taller-growing vascular plants at lower altitudes, where the biomass of Betula nana in particular will increase. Matforming lichens dominant on dry, windblown ridges are easily overgrazed at high reindeer densities. This has longterm effects due to lichens’ slow regeneration rate, but may also reduce competition from vascular plants in a long time perspective. Fires may act in a similar way in some forested areas. Accessibility of winter forage depends on plant biomass, snow depth and hardness; ice crusts or exceptionally deep snow may result in starvation and increased animal mortality. Calf recruitment appears to be low and/or highly variable where winter ranges are overgrazed and hard or deep snow is common. Population decline in several Rangifer tarandus spp. has been associated with snow-rich winters. Effects tend to be delayed and cumulative, particularly on calves. This is mainly ascribed to feeding conditions for young animals which later affect age at maturation. Global warming may increase the frequency of deep or hard snow on reindeer ranges in Norway, due to increased precipitation and more frequent mild periods in winter. We hypothesise that potential benefits from increased plant productivity due to global warming will be counteracted by shifts in the distribution of preferred lichen forage, reduction of the areas of suitable winter ranges, and generally reduced forage accessibility in winter.
45
Sonnet, M., L. Labrousse, J. Bascou, A. Plunder, A. Nouibat, and A. Paul. "Assessing Chemical and Mineralogical Properties of the Alpine Slab Based on Field Analogs and Ambient Noise Tomography." Geochemistry, Geophysics, Geosystems 24, no. 12 (November 29, 2023). http://dx.doi.org/10.1029/2022gc010784.
Повний текст джерелаАнотація:
AbstractRecent geophysical campaigns in the Alps produce images with seismic property variations along the slab of sufficiently fine resolution to be interpreted as rock transformations. Since the reacting European lower crust is presumed responsible for the variations of velocities at the top of the Alpine slab, we sampled local analogs of the lower crustal lithologies in the field and modeled the evolution of equilibrium seismic properties during burial, along possible pressure‐temperature paths for the crustal portion of the slab. The results are then compared to the range of the S‐wave velocities obtained from the S‐wave velocity tomography model along the CIFALPS transect. The velocity increase from 25 to 45 km within the slab, in the tomographic model is best reproduced by the transformation of specific lithologies in the high‐pressure granulite facies along a collisional gradient (30°C/km). Although the crust is certainly not completely homogeneous, the best candidates for the rocks that make up the top of the Alpine dip crustal panel are a kinzigite from Monte San Petrone, a gneiss from the Insubric line, and blueschist mylonite from Canavese. While they may not represent the entirety of the crust, they are sufficient to explain the tomographic velocity of the Alpine slab. A lateral lithological contrast inherited from the Variscan orogeny is not required. Eclogitization, suggested as the first‐order transformation in convergence zones, could be a second‐order transformation in collisional wedges. These results also imply a partially re‐equilibrated thermal gradient, consistent with the Alpine thermal state data at depth.
46
Soergel, Dorian, Helle A. Pedersen, Thomas Bodin, Anne Paul, and Laurent Stehly. "Bayesian analysis of azimuthal anisotropy in the Alpine lithosphere from beamforming of ambient noise cross-correlations." Geophysical Journal International, September 7, 2022. http://dx.doi.org/10.1093/gji/ggac349.
Повний текст джерелаАнотація:
Summary Surface waves extracted from ambient noise cross-correlations can be used to study depth variations of azimuthal anisotropy in the crust and upper mantle, complementing XKS splitting observations. In this work, we propose a novel approach based on beamforming to estimate azimuthal anisotropy of Rayleigh wave phase velocities extracted from ambient noise cross-correlations. This allows us to identify and remove measurements biased by wavefront deformation due to 3D heterogeneities, and to properly estimate uncertainties associated with observed phase velocities. In a second step, phase velocities measured at different periods can be inverted at depth with a transdimensional Bayesian algorithm where the presence or absence of anisotropy at different depths is a free variable. This yields a comprehensive probabilistic solution that can be exploited in different ways, in particular by projecting it onto a lower dimensional space, appropriate for interpretation. For example, we show the probability distribution of the integrated anisotropy over a given depth range (e.g. upper crust, lower crust). We apply this approach to recent data acquired across the AlpArray network and surrounding permanent stations. We show that only the upper crust has a large-scale coherent azimuthal anisotropy at the scale of the Alps with fast axis directions parallel to the Alpine arc, while such large-scale patterns are absent in the lower crust and uppermost mantle. This suggests that the recent Alpine history has only overridden the anisotropic signature in the upper crust, and that the deeper layers carry the imprint of older processes. In the uppermost mantle, fast directions of anisotropy are oriented broadly north-south, which is different from results from XKS-splitting measurements or long-period surface waves. Our results therefore suggest that XKS observations are related to deeper layers, the asthenosphere and/or subduction slabs. The area north-west of the Alps shows strong anisotropy in the lower crust and uppermost mantle with a fast axis in the north-east direction that could be related to Variscan deformation.
47
Spooner, Cameron, Magdalena Scheck-Wenderoth, Mauro Cacace, and Denis Anikiev. "How Alpine seismicity relates to lithospheric strength." International Journal of Earth Sciences, April 5, 2022. http://dx.doi.org/10.1007/s00531-022-02174-5.
Повний текст джерелаАнотація:
AbstractDespite the amount of research focussed on the Alpine orogen, different hypotheses still exist regarding varying spatial seismicity distribution patterns throughout the region. Previous measurement-constrained regional 3D models of lithospheric density distribution and thermal field facilitate the generation of a data-based rheological model of the region. In this study, we compute the long-term lithospheric strength and compare its spatial variation to observed seismicity patterns. We demonstrate how strength maxima within the crust (~ 1 GPa) and upper mantle (> 2 GPa) occur at temperatures characteristic of the onset of crystal plasticity in those rocks (crust: 200–400 °C; mantle: ~ 600 °C), with almost all seismicity occurring in these regions. Correlation in the northern and southern forelands between crustal and lithospheric strengths and seismicity show different patterns of event distribution, reflecting their different tectonic settings. Seismicity in the plate boundary setting of the southern foreland corresponds to the integrated lithospheric strength, occurring mainly in the weaker domains surrounding the strong Adriatic plate. In the intraplate setting of the northern foreland, seismicity correlates to modelled crustal strength, and it mainly occurs in the weaker and warmer crust beneath the Upper Rhine Graben. We, therefore, suggest that seismicity in the upper crust is linked to weak crustal domains, which are more prone to localise deformation promoting failure and, depending on the local properties of the fault, earthquakes at relatively lower levels of accumulated stress than their neighbouring stronger counterparts. Upper mantle seismicity at depths greater than modelled brittle conditions, can be either explained by embrittlement of the mantle due to grain-size sensitive deformation within domains of active or recent slab cooling, or by dissipative weakening mechanisms, such as thermal runaway from shear heating and/or dehydration reactions within an overly ductile mantle. Results generated in this study are available for open access use to further discussions on the region.
48
R. Cassinis, F. Federici, A. Galmozzi, and S. Scarascia. "A 3D gravity model of crustal structure in the Central-Eastern Alpine sector." Annals of Geophysics 40, no. 5 (October 18, 1997). http://dx.doi.org/10.4401/ag-3846.
Повний текст джерелаАнотація:
Assuming as a starting model the pattern of the Moho boundary as interpreted in a recent study on the basis of the available DSS profiles, a preliminary 3D gravity model of the crustal structures in the Central-Eastern Alpine sector is proposed. The aim of the present work is to confirm the seismic results concerning the Moho and to better shape the main discontinuities in the intermediate and upper crust, where the seismic data are too scattered to allow a reliable interpretation. The gravity field is calculated along twelve cross-sections oriented S-N and crossing the Alpine range from the Padan-Venetian plain to the Bavarian molasse and to the Austrian calcareous Alps. The westernmost section coincides with the European Geotraverse while the easternmost one is positioned at the longitude of about 14ºeast. The assumed density model is very simple (only 6 layers); for each unit the density is maintained constant. The model describes a European mantle dipping southwards underneath an overlapping, uplifted Adriatic mantle. As far as the lower crust is concerned, its top is found at depths between 18 and 28 km, the deepest values being reached in the south-eastern sector; the density appears higher in the Adriatic domain than in the European one and the Adriatic lower crust seems to be deeply indented northwards. The low density surface layers appear very thin in a large area of the northwestern sector, while in the south and southeast their thickness reaches about 10 km. This study must be considered as a complement to the seismic interpretation both as a validation of the model of the deep crust and Moho boundary and as an additional source of information on the upper crust.
49
Withers, M., A. R. Cruden, and M. C. Quigley. "The Development of Fault Networks at the Termination of Continental Transform Faults When Their Connecting Plate Boundary Is “Misaligned”." Tectonics 42, no. 10 (October 2023). http://dx.doi.org/10.1029/2023tc007823.
Повний текст джерелаАнотація:
AbstractWe report the results of a series of scaled laboratory experiments that investigate the development of fault systems in plate boundary transition zones, where deformation is distributed between a continental transform fault (e.g., Alpine Fault, New Zealand; North Anatolian Fault (NAF), Turkey; San Andreas Fault (SAF), USA) and its connecting plate boundary. In these transition zones, continental transform faults are observed to branch into multiple subsidiary faults. Here we show that large‐scale transition zone fault networks comprise crustal‐scale Riedel shears that develop sequentially outwards and away from the parent transform fault. Such fault networks form within brittle upper crust that overlies a ductile lower crust that deforms by large‐scale distributed simple shear. We argue that large‐scale distributed deformation of the lower crust occurs when continental transform faults are “misaligned” relative to their connecting plate boundaries. This misalignment may occur: (a) where a transform fault does not directly connect with a convergent or divergent plate boundary, as in the northern termination of the Alpine Fault and the western termination of the NAF; and (b) where a significant bend in the transform fault occurs in the plate boundary transition zone, as in the southern termination of the SAF. The development of such plate boundary misalignments appears to occur when a plate boundary transition zone develops as a continental transform fault propagates toward a different type of “connecting” plate boundary.
50
Brandt, S., and V. Schenk. "Metamorphic response to Alpine thrusting of a crustal-scale basement nappe in southern Calabria (Italy)." Journal of Petrology, June 12, 2020. http://dx.doi.org/10.1093/petrology/egaa063.
Повний текст джерелаАнотація:
Abstract Structural, geophysical and age data indicate that the tilted cross section of the Variscan continental crust exposed in the Serre of southern Calabria forms the uppermost Alpine nappe (‘Serre nappe’) of three Variscan basement slices derived from the southern European margin. This Alpine nappe stack is a fragment of the western Mediterranean Alps and rests now, after Miocene emplacement, on top of the Apennine carbonate platform. We report for the first time a P-T path for prograde Alpine metamorphism, which is restricted to the two lower nappes (Castagna and Bagni nappes) that are squeezed in between cooler tectonic units, the Serre nappe above and the Apennine platform below. Therefore, we attribute their metamorphism to tectonic loading and concomitant shear heating during Eocene south-directed overthrusting of the crustal-scale Serre nappe. In the underlying Castagna nappe, Alpine metamorphism is only locally recorded, mainly by new growth of garnet, forming at the expense of retrogressed Variscan biotite dated at 43 Ma. The local existence of Alpine besides relict Variscan mineral assemblages in the strongly but heterogeneously overprinted rocks allows for characterization of metamorphic evolutions during both the Alpine and Variscan orogeneses in the former intermediate level of the Variscan crust of Calabria. The metamorphic evolutions have been reconstructed through P-T pseudosection modeling for Al-rich metasediments. In the Castagna nappe, rarely preserved Variscan garnet-sillimanite-biotite-ilmenite-plagioclase-quartz (±K-feldspar ±Si-poor white mica) assemblages formed under amphibolite-facies subsolidus conditions (650±60 °C/ 4.0±0.5 kbar). During subsequent decompression and cooling to greenschist-facies conditions garnet was replaced by biotite-sillimanite and later by white mica-chlorite intergrowths. Retrogression of Variscan biotite is evidenced by the exsolution of ilmenite along grain boundaries and cleavages, textures that were subsequently overgrown by Alpine garnet coexisting with Si-rich white mica, rare chloritoid (in metapelites), and hornblende (in metagreywackes). Alpine garnet shows prograde zoning, is Ca-rich and thus distinct from unzoned and Ca-poor Variscan garnet porphyroblasts. Estimated conditions (520±40 °C/8.0±1.0 kbar) record elevated pressures during Alpine lower amphibolite-facies metamorphism. In the lowermost Bagni nappe, rare prograde-zoned, Ca-rich garnet in strongly retrogressed mylonitic quartz-phyllites enables isopleth thermobarometry, which returns lower amphibolite-facies conditions (555±10 °C/7.4±0.3 kbar) resembling those for Alpine garnet growth in the Castagna nappe. The similar clockwise P-T paths for prograde Alpine metamorphism and the consistent peak pressures of 7-9 kbar in the Castagna and Bagni nappes point to a joint short-lived metamorphism during overthrusting of the crustal-scale Serre nappe within the south European margin during the north-directed subduction of the Alpine Tethys. South-directed overthrusting of the now tilted Variscan crustal section of the Serre along the up to 500 m thick mylonite horizon of the Curinga-Girifalco Line is in agreement with seismic data indicating an extended, few kilometer thick low-velocity zone (Bagni and Castagna nappes and mylonites of the Curinga-Girifalco Line) below the exposed lower crustal section of the Serre nappe. Alpine tectonic transport direction, timing and metamorphic conditions described here are consistent with those reported from the Aspromonte area in southernmost Calabria suggesting a coeval Alpine history characterized by metamorphism due to nappe loading and concomitant shear heating. The Alpine subduction-erosion-accretion processes inferred here for the Calabrian basement nappes resemble those proposed for the Dent Blanche nappe system in the Western Alps.