Увійти

Готові списки джерел за темами / Low-temperature Techniques / Статті в журналах

Статті в журналах з теми "Low-temperature Techniques"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Low-temperature Techniques.

Автор: Grafiati

Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Low-temperature Techniques".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Conradi, Mark S. "Low-temperature NMR techniques." Concepts in Magnetic Resonance 5, no. 3 (July 1993): 243–62. http://dx.doi.org/10.1002/cmr.1820050304.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Shimizu, Katsuya. "Introduction to DAC Techniques. Low Temperature Technique for DAC." REVIEW OF HIGH PRESSURE SCIENCE AND TECHNOLOGY 8, no. 1 (1998): 41–48. http://dx.doi.org/10.4131/jshpreview.8.41.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Rodgers, D. W. "Low-temperature techniques in macromolecular crystallography." Acta Crystallographica Section A Foundations of Crystallography 52, a1 (August 8, 1996): C8. http://dx.doi.org/10.1107/s0108767396098674.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Kosarev, S., D. Mokhorov, and A. Mokhorova. "Investigative techniques in low-temperature environments." IOP Conference Series: Earth and Environmental Science 539 (August 13, 2020): 012141. http://dx.doi.org/10.1088/1755-1315/539/1/012141.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

NODA, Yukio. "Techniques of low temperature X-ray experiments." Nihon Kessho Gakkaishi 38, no. 5 (1996): 339–44. http://dx.doi.org/10.5940/jcrsj.38.339.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

GIULIANI, A. "CUORE: low-temperature techniques for neutrino physics." Physica B: Condensed Matter 329-333 (May 2003): 1570–73. http://dx.doi.org/10.1016/s0921-4526(02)02299-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Webster, S., and T. D. Binnie. "PVDF sensors with low-temperature bonding techniques." Sensors and Actuators A: Physical 49, no. 1-2 (June 1995): 61–65. http://dx.doi.org/10.1016/0924-4247(95)01010-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

NAKAGAWA, Hisashi. "Low-Temperature Techniques for Realizing Temperature Standard Below 1 K." TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan) 50, no. 6 (2015): 298–305. http://dx.doi.org/10.2221/jcsj.50.298.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Pertijs, Michiel A. P., André L. Aita, Kofi A. A. Makinwa, and Johan H. Huijsing. "Low-Cost Calibration Techniques for Smart Temperature Sensors." IEEE Sensors Journal 10, no. 6 (June 2010): 1098–105. http://dx.doi.org/10.1109/jsen.2010.2040730.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Wu, Z., Y. Shi, H. Xie, Y. Chen, J. Zhang, J. Xu, and H. Chen. "SURFACE MODIFICATION OF POLYMERS BY LOW TEMPERATURE PlASMA TECHNIQUES." Surface Engineering 11, no. 1 (January 1995): 53–56. http://dx.doi.org/10.1179/sur.1995.11.1.53.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Bulat, E. S., M. Tabasky, B. Tweed, C. Herrick, S. Hankin, N. J. Lewis, D. Oblas, and T. Fitzgerald. "Fabrication of waveguides using low‐temperature plasma processing techniques." Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 11, no. 4 (July 1993): 1268–74. http://dx.doi.org/10.1116/1.578538.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Hong, Seonghwan, Hee Jun Kim, I. Sak Lee, Hyung Tae Kim, and Hyun Jae Kim. "(Invited) Oxide TFT Fabrication with Various Low Temperature Techniques." ECS Transactions 86, no. 11 (July 23, 2018): 95–104. http://dx.doi.org/10.1149/08611.0095ecst.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Alonso, JC, A. Ortiz, and C. Falcony. "Low temperature SiO2 films deposited by plasma enhanced techniques." Vacuum 43, no. 8 (August 1992): 843–47. http://dx.doi.org/10.1016/0042-207x(92)90149-q.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

14

SCHLEICH, D. "Chimie douce: Low temperature techniques for synthesizing useful compounds." Solid State Ionics 70-71 (May 1994): 407–11. http://dx.doi.org/10.1016/0167-2738(94)90345-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Mutetwa, S. M., and E. R. James. "Low temperature preservation ofPlasmodiumspp." Parasitology 90, no. 3 (June 1985): 589–603. http://dx.doi.org/10.1017/s003118200005558x.

Повний текст джерела

Анотація:

Interest in the long-term low temperature preservation of malaria parasites was initiated by Coggeshall's (1939) demonstration that the intra-erythrocytic stages could survive storage at −76°C for 70 days. Numerous studies have subsequently been published in which a variety of techniques have been used. In addition, several reviews have included sections on the cryopreservation of malaria, the most recent being by James (1980), Leef, Hollingdale, & Beaudoin (1981), Nguyen-Dinh, Chemangey-Masaba, Spencer, Campbell, Chin & Collins (1981) and a WHO memorandum (1981). Most of these reports and reviews have dealt with the problems of cryopreserving malaria parasites from a parasitological viewpoint. In an attempt to provide a cryobiologically orientated review of value both to cryobiologists and practicing parasitologists the published technical reports have been summarized in chronological order in Tables 1 and 2, and the important cryobiological parameters are discussed.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Knorr, Daniel B., Richard R. Davison, and Charles J. Glover. "Effect of Various Aging Techniques on Asphalt Low-Temperature Properties." Transportation Research Record: Journal of the Transportation Research Board 1810, no. 1 (January 2002): 9–16. http://dx.doi.org/10.3141/1810-02.

Повний текст джерела

Анотація:

The effects of various aging techniques on asphalt low-temperature properties were investigated in three phases. In Phase I, it was shown that 38 days’ aging of a 1-mm-thick asphalt film at 60°C and 1 atmosphere of air is approximately equivalent to 20 h in the pressure-aging vessel (PAV) of a 3.2-mm-thick film at 100°C after both have been rolling thin-film oven test aged. Low-temperature properties of the samples were found not to vary significantly between the PAV and environmental room–aged material. In Phase II of this work, a correlation was developed from the high-temperature parameter G*/sin(δ) at 58°C and 10 radians/s to correct the low-temperature performance grade when it is desirable to skip the long-term aging procedure. In Phase III of this study, it was shown that as asphalts are aged for extended periods, their relative ranks with respect to Strategic Highway Research Program low-temperature specifications may change. Furthermore, as asphalts are aged for extended periods, the low-temperature grades move from being limited by stiffness at short aging times to being limited by m-value (creep rate) at longer aging times.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Pereira-Ramos, Jean-Pierre. "Electrochemical properties of cathodic materials synthesized by low-temperature techniques." Journal of Power Sources 54, no. 1 (March 1995): 120–26. http://dx.doi.org/10.1016/0378-7753(94)02051-4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Weiser, M., S. Kalbitzer, M. Zinke-Allmang, H. Damjantschitsch, and G. Frech. "Low temperature implantation and analysis techniques for hydrogen in metals." Materials Science and Engineering 69, no. 2 (March 1985): 411–18. http://dx.doi.org/10.1016/0025-5416(85)90340-4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Wiese, W. L. "Spectroscopic diagnostics of low temperature plasmas: techniques and required data." Spectrochimica Acta Part B: Atomic Spectroscopy 46, no. 6-7 (January 1991): 831–41. http://dx.doi.org/10.1016/0584-8547(91)80084-g.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Perez, Michel, Fabien Perrard, Véronique Massardier-Jourdan, Xavier Kleber, Vincent Schmitt, and Alexis Deschamps. "Low Temperature Solubility Limit of Copper in Iron." Materials Science Forum 500-501 (November 2005): 631–38. http://dx.doi.org/10.4028/www.scientific.net/msf.500-501.631.

Повний текст джерела

Анотація:

The solubility limit of copper in iron at temperature lower than 700°C is not precisely known because copper diffusion is too slow to reach an equilibrium with classical experimental techniques involving long range diffusion. However, fine precipitation of copper can lead to an equilibrium in a reasonable ageing time. Hence, coupling ThermoElectric Power and Small Angle X-ray Scattering techniques leads to a precise estimation of this solubility limit in the temperature range 500°C-700°C. Values obtained are confirmed by Tomographic Atom Probe and give results much higher than what is usually extrapolated from high temperature experiments.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Sarker, AK, M. Rashid, DC Roy, M. Musarrat, and UH Bithi. "Ginger (Zingiber officinale) powder from low temperature drying technique." Bangladesh Journal of Scientific and Industrial Research 56, no. 2 (June 23, 2021): 133–40. http://dx.doi.org/10.3329/bjsir.v56i2.54320.

Повний текст джерела

Анотація:

Ginger powder was prepared using different low temperature drying techniques and their nutritional, phytochemicals, functional and sensory quality were investigated. Moisture content was significantly (p<0.05) higher (7.16±0.04%) in shade dried powder and lowest in oven dried powder. Protein, fat and fiber contents varied with drying techniques ranging from 6.08±0.05 to 6.68±0.07%, 1.08±0.16 to 1.39±0.25% and 3.86±0.13 to 5.11±0.06% respectively. Highest alkaloid content was found in mechanical dried powder (4.44±0.04%), while highest flavonoid content was found in oven dried ginger powder (4.67±0.07%) and maximum saponin content was recorded in shade dried powder (2.67±0.10%). Highest ascorbic acid content (3.53±0.08 mg/100g) was found in shade dried powder and lowest was recorded in oven dried ginger powder (3.53±0.08 mg/100g). Sun drying technique exhibited better nutritional and sensory quality. The sensory score demonstrated that acceptance of all dried ginger powder was in the range of liked very much to liked moderately by the panelist. Low temperature drying techniques have positive significance on retaining phytochemicals and sensory quality of processed ginger. Bangladesh J. Sci. Ind. Res.56(2), 133-140, 2021

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Sabatini, R. L., Yimei Zhu, Masaki Suenaga, and A. R. Moodenbaugh. "Low-temperature annealing of YBa2Cu3O7-x." Proceedings, annual meeting, Electron Microscopy Society of America 50, no. 1 (August 1992): 88–89. http://dx.doi.org/10.1017/s0424820100120849.

Повний текст джерела

Анотація:

Low temperature annealing (<400°C) of YBa2Cu3O7x in a ozone containing oxygen atmosphere is sometimes carried out to oxygenate oxygen deficient thin films. Also, this technique can be used to fully oxygenate thinned TEM specimens when oxygen depletion in thin regions is suspected. However, the effects on the microstructure nor the extent of oxygenation of specimens has not been documented for specimens exposed to an ozone atmosphere. A particular concern is the fact that the ozone gas is so reactive and the oxygen diffusion rate at these temperatures is so slow that it may damage the specimen by an over-reaction. Thus we report here the results of an investigation on the microstructural effects of exposing a thinned YBa2Cu3O7-x specimen in an ozone atmosphere using transmission electron microscopy and energy loss spectroscopy techniques.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Kok, Mustafa Versan, Mikhail A. Varfolomeev, and Danis K. Nurgaliev. "Low-temperature oxidation reactions of crude oils using TGA–DSC techniques." Journal of Thermal Analysis and Calorimetry 141, no. 2 (November 21, 2019): 775–81. http://dx.doi.org/10.1007/s10973-019-09066-y.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Pistol, M. E., G. Paulsson, L. Samuelson, M. Rask, and G. Landgren. "A study of indirect superlattices using low-temperature optical spectroscopic techniques." Superlattices and Microstructures 5, no. 1 (January 1989): 119–22. http://dx.doi.org/10.1016/0749-6036(89)90079-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

25

SCHLEICH, D. M. "ChemInform Abstract: Chimie Douce: Low Temperature Techniques for Synthesizing Useful Compounds." ChemInform 25, no. 46 (August 18, 2010): no. http://dx.doi.org/10.1002/chin.199446277.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Bastacky, Jacob, Thomas L. Hayes, Joong Lee, Charles Lee, John Goerke, Steve Ferreira, Ralph Thrasher, and Edwin Garcia. "Low-temperature specimen preparation apparatus and techniques for low-temperature scanning electron microscopy (LTSEM) and synchrotron soft x-ray microscopy." Proceedings, annual meeting, Electron Microscopy Society of America 46 (1988): 108–9. http://dx.doi.org/10.1017/s0424820100102626.

Повний текст джерела

Анотація:

We have developed equipment and techniques for low-temperature scanning electron microscope (LTSEM) and x-ray microscope examinations of animal tissue samples. A cryoprobe for rapidly freezing tissue in vivo, a low-temperature saw for cutting large blocks of frozen tissue without warming, cardboard containers for sample storage in liquid nitrogen (LN2), tools for holding and manipulating frozen specimens, and an under-LN2 specimen viewer are described here. An LTSEM specimen holder for small blocks of tissue and a low-temperature trim saw for precisely cutting such blocks are described elsewhere. We have found such equipment, along with various commercial and specially fabricated dewars, to greatly facilitate our LTSEM experiments.To minimize ice crystal size by freezing as rapidly as possible and to maintain tissue in as close to normal physiologic state as possible during freezing, we use a cryoprobe for freezing 1 cm2 surfaces of tissue in vivo. The cryoprobe (Fig. 1) is a highly-polished 1 mm thick, 10 mm diam.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Nam, Daehan, Seokjoon Kim, Jung Ho Kim, Seungjin Lee, Daneub Kim, Jinseo Son, Doyeon Kim, Byung Seok Cha, Eun Sung Lee, and Ki Soo Park. "Low-Temperature Loop-Mediated Isothermal Amplification Operating at Physiological Temperature." Biosensors 13, no. 3 (March 10, 2023): 367. http://dx.doi.org/10.3390/bios13030367.

Повний текст джерела

Анотація:

Loop-mediated isothermal amplification (LAMP) is one of the most widely used isothermal amplification technologies in molecular diagnostics. However, LAMP operates at a high temperature of 65 °C; thus, operating LAMP at a lower temperature is desirable to maximize its usefulness for on-site diagnosis. In this study, we propose a new version of LAMP, termed low-temperature LAMP, which operates at the physiological temperature of 37 °C. Low-temperature LAMP differs from conventional LAMP operating at 65 °C in terms of the concentrations of MgSO4 and deoxyribonucleoside triphosphates (dNTPs), as well as the lengths of DNA probes, which are crucial for the execution of low-temperature LAMP. Under the optimal conditions, the amplification efficiency of low-temperature LAMP is comparable to that of conventional LAMP. In addition, the ligation reaction at 37 °C, which is necessary to detect actual target nucleic acids, is combined without altering the temperature, enabling the identification of miR-21, a cancer-promoting oncogenic miRNA, with high sensitivity and selectivity. The method described in this paper does not require expensive DNA modifications or special additives and would facilitate the widespread application of LAMP in facility-limited or point-of-care settings, paving the way to improvements in other isothermal-amplification-based techniques.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Avery, William F. "Low Temperature Direct Aluminum Soldering Paste." Additional Conferences (Device Packaging, HiTEC, HiTEN, and CICMT) 2012, DPC (January 1, 2012): 001597–626. http://dx.doi.org/10.4071/2012dpc-wa31.

Повний текст джерела

Анотація:

For economic and weight considerations using aluminum to make connections to copper has been important in electronic components and making these connections via soldering provides an excellent thermal and electrical pathway. Soldering aluminum to copper in many applications involves the use of low temperature solder bonding to prevent damage to heat sensitive parts such as sealed copper heat pipes and sensitive electronic components. Typically, aluminum soldering is accomplished by plating over the aluminum to make that surface solderable, which is an expensive extra step in this processing. The development of a low temperature direct aluminum soldering paste eliminates the costly plating operation needed to make certain aluminum alloys solderable. The low temperature direct aluminum soldering paste, performing below 200 °C, provides for a soldering option that will work via induction, oven reflow, hot plate, or soldering iron techniques. The paste consists of a special flux medium and a proprietary low temperature lead-free solder alloy. Evaluation of the solderpaste was by several methods. Solderability testing compared the paste on a variety of aluminum alloys. Soldering joint cross-sectioning followed by scanning electron analysis proves the viability of the solder joints. Tensile strength testing of the solder joints measured the strength of the copper to aluminum and aluminum to aluminum solder joints.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Usevičiūtė, Luiza, Edita Baltrėnaitė-Gedienė, and Pranas Baltrėnas. "Hydrophilicity enhancement of low-temperature lignocellulosic biochar modified by physical–chemical techniques." Journal of Material Cycles and Waste Management 23, no. 5 (May 28, 2021): 1838–54. http://dx.doi.org/10.1007/s10163-021-01255-y.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

YAMAMURO, Osamu, Yuki MIZUNO, and Maiko KOFU. "Structures of Simple Molecular Glasses Prepared by Low-Temperature Vapor-Deposition Techniques." Nihon Kessho Gakkaishi 58, no. 1 (2016): 13–17. http://dx.doi.org/10.5940/jcrsj.58.13.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Hirose, Motohiro. "Low Temperature Deposition and Crystallization of Silicon by Means of Laser Techniques." Materials Science Forum 173-174 (September 1994): 7–16. http://dx.doi.org/10.4028/www.scientific.net/msf.173-174.7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Kim, Si-Kuk, Byeong-Kil Chae, and Yong-Taek Han. "Investigation Techniques of Arson Fire in Low-Temperature Warehouses Using ED-XRF." Fire Science and Engineering 35, no. 6 (December 31, 2021): 85–93. http://dx.doi.org/10.7731/kifse.749c4872.

Повний текст джерела

Анотація:

Investigation techniques for fire prevention in low-temperature warehouses were studied using energy dispersive X-ray fluorescence (ED-XRF). In the first experiment, a sample (galvanized steel sheet plus urethane foam plus sandwich panel) was burned with 500 mL of a flammable liquid (gasoline, thinner, kerosene, and light oil)/ Then, the component change of the sample was measured. In the combustion experiment, there was a difference in the heat of combustion depending on the type of flammable liquid; however, as a result of measuring the component change of the sample with ED-XRF after combustion, the largest component change was measured in the combustion experiment with gasoline. The change was in the order of thinner, kerosene, and diesel. Using ED-XRF, it was possible to distinguish the flammable liquid used in the experiment by measuring the component change of the sample resulting from the difference in the combustion heat of the flammable liquid. A second experiment was conducted under the same conditions as the first experiment, assuming a fire brigade fire suppression condition, and the combustion time of the flammable liquid was limited to 600 s. A combustion characteristic of flammable liquids is that the temperature and heat flux reach the maximum value within 300 s after the start of combustion regardless of the type of liquid. Because the change of composition was confirmed in the order of light oil, it was possible to distinguish the flammable liquid used at the fire site using the ED-XRF measurement result.

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Karlsson, M. G., and H. C. H. McIntyre. "EVALUATION OF LOW TEMPERATURE FLOWER FORMATION IN CHRYSANTHEMUM USING SEVERAL MICROSCOPY TECHNIQUES." Acta Horticulturae, no. 272 (July 1990): 273–78. http://dx.doi.org/10.17660/actahortic.1990.272.40.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Qu, Liang, Xinqiang Zhang, Hongying Duan, Rui Zhang, Guanghua Li, and Yong Lei. "The application of LIBS and other techniques on Chinese low temperature glaze." MRS Advances 2, no. 39-40 (2017): 2081–94. http://dx.doi.org/10.1557/adv.2017.85.

Повний текст джерела

Анотація:

ABSTRACT The focus of this paper is on analysis, comparison and research on the colorful low-temperature, lead-containing overglazes on glazed porcelain body and on the enamel glazes on the metal body of the Qing Dynasty by adopting several analytical methods. Analysis and tests on the element, boron in overglaze on glazed porcelain body and enamel glaze on metal body, were performed using laser induced breakdown spectroscopy (LIBS), and the results showed that Cloisonné enamel, painted enamel and Falangcai samples contained boron, while Famille Rose (Fencai) samples did not contain boron. Meanwhile, such analysis methods as laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), energy dispersive X-ray spectroscopy (EDXRF), Micro-Raman, stereomicroscope and Confocal laser scanning microscopy (CLSM) were used to test and observe the element composition, crystal composition and microstructure of the samples. The results illustrated that matrix glaze of Cloisonné enamel, painted enamel and Falangcai was the same. The yellow glaze was a lead-alkali glass and other color glazes were boron-lead-alkali glass, while all color glazes of Famille Rose were lead-alkali glass. Colorful low-temperature overglaze on glazed porcelain body and enamel glaze on metal body had a common practice and technology in the use of opacifiers and colorants. Compared to painted enamel, the painting technique of Famille Rose was more complicated, and effect was apparently praised as being superior.

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Woodbury, Allan D., B. Narod, B. Chandra, and J. R. Bennest. "Temperature measurements in geotechnical studies using low-noise, high-resolution digital techniques." Canadian Geotechnical Journal 28, no. 5 (October 1, 1991): 639–49. http://dx.doi.org/10.1139/t91-078.

Повний текст джерела

Анотація:

In this paper we show how temperatures can be of use as a normal well-logging tool and as an aid in site hydrogeological analysis. A back-portable, digital temperature-logging system has been developed. The system consists of a digital probe, a small surface unit, a back-portable cable reel, and a lap-top computer. The probe is 2.54 cm outside diameter and has been used in 3.05 cm inside diameter tubing. The overall accuracy of the probe is ±0.01 °C in the range −40 to + 40 °C. Power consumption is less than 30 mA at 12 V direct current. The probe's capability and the thermal methodology are demonstrated at a Manitoba Hydro project site along the Nelson River in northern Manitoba. The thermal regime of the site displays a myriad of effects, from permafrost to transient-advective environments. Surface temperatures are affected by permafrost, particularly through the postglacial deposits. Permafrost is less evident towards the river on the north side, undoubtedly due to warming effects from river and ice staging. Although only one set of temperatures has been obtained at the site, the inclusion of the thermal data aided significantly in identifying effects that otherwise would have been missed in a purely hydrogeologic investigation. Key words: digital thermal measurements, geotechnical studies, permafrost, groundwater.

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Bychinskii, V. A., Zh V. Kostyanetskaya, K. V. Chudnenko, A. A. Tupitsin, and Yu I. Sidorov. "Techniques for the calculation of consistent low-temperature thermodynamic data for compounds." Geochemistry International 46, no. 2 (February 2008): 182–86. http://dx.doi.org/10.1134/s0016702908020080.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Williams, Forrest L., J. J. McNally, G. A. Al‐Jumaily, and J. R. McNeil. "Summary Abstract: Low‐temperature deposition of optical coatings using assisted deposition techniques." Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films 5, no. 4 (July 1987): 2159–61. http://dx.doi.org/10.1116/1.574944.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Julien, C., S. S. Michael, and S. Ziolkiewicz. "Structural and electrochemical properties of LiNi0.3Co0.7O2 synthesized by different low-temperature techniques." International Journal of Inorganic Materials 1, no. 1 (April 1999): 29–37. http://dx.doi.org/10.1016/s1463-0176(99)00005-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Huang, K., and T. Chiu. "Convenient techniques for selectivity enhancement of low-temperature co-fired ceramic baluns." IET Microwaves, Antennas & Propagation 6, no. 2 (2012): 165. http://dx.doi.org/10.1049/iet-map.2011.0063.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Veith, Michael, and Walter Frank. "Low-temperature x-ray structure techniques for the characterization of thermolabile molecules." Chemical Reviews 88, no. 1 (January 1988): 81–92. http://dx.doi.org/10.1021/cr00083a004.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Zech, M., C. Boedefeld, F. Otto, and D. Andres. "Magnetic Imaging on the Nanometer Scale Using Low-Temperature Scanning Probe Techniques." Microscopy Today 19, no. 6 (October 28, 2011): 34–38. http://dx.doi.org/10.1017/s1551929511001180.

Повний текст джерела

Анотація:

Multiple techniques now exist for the investigation of nanoscale magnetic properties, extending from Lorentz microscopy and magneto-optical imaging (MOKE) to scanning probe microscopy approaches (see Figure 1 for an overview). Among the latter, the most widely used techniques offering both high spatial and high magnetic-field resolution are magnetic force microscopy (MFM) and scanning Hall probe microscopy (SHPM). Both techniques are well known for their versatility and ease of use and can be further adapted for operation in cryogenic conditions. This property is crucial for all areas of research where high magnetic fields are required and where the influence of thermal energy/broadening needs to be suppressed. For example, much of today's fundamental research on superconductivity, spintronics, and magnetic data storage is taking place at low temperatures.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Woodbury, A. D., B. Narod, B. Chandra, and J. R. Bennest. "Temperature measurements in geotechnical studies using low-noise, high-resolution digital techniques." International Journal of Rock Mechanics and Mining Sciences & Geomechanics Abstracts 29, no. 4 (July 1992): 235. http://dx.doi.org/10.1016/0148-9062(92)90756-p.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Shih, S. F., and E. Y. Chen. "GOES IR AND DUMMY VARIABLE TECHNIQUES FOR LOW TEMPERATURE ASSESSMENT IN FLORIDA." Journal of the American Water Resources Association 24, no. 2 (April 1988): 367–75. http://dx.doi.org/10.1111/j.1752-1688.1988.tb02995.x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Balaraman, D., P. M. Raj, L. Wan, I. R. Abothu, S. Bhattacharya, S. Dalmia, M. J. Lance, M. Swaminathan, M. D. Sacks, and R. R. Tummala. "BaTiO3 Films by Low-Temperature Hydrothermal Techniques for Next Generation Packaging Applications." Journal of Electroceramics 13, no. 1-3 (July 2004): 95–100. http://dx.doi.org/10.1007/s10832-004-5082-2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Takamatsu, Tomohisa, Masatsune Kato, Takashi Noji, and Yoji Koike. "Low-Temperature Synthesis of the Infinite-Layer Compound LaNiO2by Soft-Chemical Techniques." Japanese Journal of Applied Physics 49, no. 9 (September 21, 2010): 093101. http://dx.doi.org/10.1143/jjap.49.093101.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Feng, Yejun, R. Jaramillo, Jiyang Wang, Yang Ren, and T. F. Rosenbaum. "Invited Article: High-pressure techniques for condensed matter physics at low temperature." Review of Scientific Instruments 81, no. 4 (April 2010): 041301. http://dx.doi.org/10.1063/1.3400212.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Okano, Shuichi, Hiroshi Yamakawa, Masakuni Suzuki, and Akio Hiraki. "Fabrication of Chalcogenide Amorphous Semiconductor Diodes Using Low Temperature Thermal Diffusion Techniques." Japanese Journal of Applied Physics 26, Part 1, No. 7 (July 20, 1987): 1102–6. http://dx.doi.org/10.1143/jjap.26.1102.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Manet, Philippe, Renaud Ambroise, David Bol, Marc Baltus, and Jean-Didier Legat. "Low Power Techniques Applied to a 80C51 Microcontroller for High Temperature Applications." Journal of Low Power Electronics 2, no. 1 (April 1, 2006): 95–104. http://dx.doi.org/10.1166/jolpe.2006.011.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Bhat, I. B. "Low temperature epitaxy of HgTe, CdTe, and HgCdTe using flow modulation techniques." Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures 10, no. 4 (July 1992): 1376. http://dx.doi.org/10.1116/1.585871.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Peterson, K. A., K. D. Patel, C. K. Ho, S. B. Rohde, C. D. Nordquist, C. A. Walker, B. D. Wroblewski, and M. Okandan. "Novel Microsystem Applications with New Techniques in Low-Temperature Co-Fired Ceramics." International Journal of Applied Ceramic Technology 2, no. 5 (September 2005): 345–63. http://dx.doi.org/10.1111/j.1744-7402.2005.02039.x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!