Статті в журналах з теми "Liner surface"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Liner surface".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Peng, Engao, and Sheng Huang. "Wear performance of cylinder liner surface texturing on cylinder liner–piston ring assembly." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 232, no. 3 (June 15, 2017): 291–306. http://dx.doi.org/10.1177/1350650117713435.
Повний текст джерелаYin, Bifeng, Huiqin Zhou, Bo Xu, and Hekun Jia. "The influence of roughness distribution characteristic on the lubrication performance of textured cylinder liners." Industrial Lubrication and Tribology 71, no. 3 (April 8, 2019): 486–93. http://dx.doi.org/10.1108/ilt-07-2018-0258.
Повний текст джерелаÖzkan, Doğuş, and Hakan Kaleli. "Surface and Wear Analysis of Zinc Phosphate Coated Engine Oil Ring and Cylinder Liner Tested with Commercial Lubricant." Advances in Mechanical Engineering 6 (January 1, 2014): 150968. http://dx.doi.org/10.1155/2014/150968.
Повний текст джерелаPawlus, Pawel, Waldemar Koszela, and Rafal Reizer. "Surface Texturing of Cylinder Liners: A Review." Materials 15, no. 23 (December 3, 2022): 8629. http://dx.doi.org/10.3390/ma15238629.
Повний текст джерелаGálik, R., and L. Boďo Š Staroňová. "Monitoring the inner surface of teat cup liners made from different materials." Research in Agricultural Engineering 61, Special Issue (June 2, 2016): S74—S78. http://dx.doi.org/10.17221/50/2015-rae.
Повний текст джерелаFatah, Shilan H., and Radhwan H. Hasan. "Evaluation of Bond Strength and Dimensional Accuracy of Soft Liner to Microwave Cured Denture Base Material." Polytechnic Journal 10, no. 2 (December 30, 2020): 32–37. http://dx.doi.org/10.25156/ptj.v10n2y2020.pp32-37.
Повний текст джерелаSaputra, Eko, Iwan Budiwan Anwar, Rifky Ismail, J. Jamari, and Emile van der Heide. "Study of Unipolar and Bipolar Hip Prostheses Using Finite Element Simulation: Contact Stress Analysis." Key Engineering Materials 739 (June 2017): 96–102. http://dx.doi.org/10.4028/www.scientific.net/kem.739.96.
Повний текст джерелаMurata, Yo, Tatsuya Ishii, Shunji Enomoto, Hideshi Oinuma, Kenichiro Nagai, Junichi Oki, and Hirofumi Daiguji. "Proposal of Acoustic Liners Combined with Fine-Perforated-Film." INTER-NOISE and NOISE-CON Congress and Conference Proceedings 263, no. 1 (August 1, 2021): 5475–84. http://dx.doi.org/10.3397/in-2021-3116.
Повний текст джерелаBiboulet, N., H. Bouassida, J. Cavoret, and AA Lubrecht. "Determination of fundamental parameters for the cross-hatched cylinder liner micro-geometry." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 231, no. 3 (August 5, 2016): 293–301. http://dx.doi.org/10.1177/1350650114548202.
Повний текст джерелаZhu, Feng, Jiujun Xu, Xiaoguang Han, Yan Shen, and Mei Jin. "Tribological performance of three surface-modified piston rings matched with chromium-plated cylinder liner." Industrial Lubrication and Tribology 69, no. 2 (March 13, 2017): 276–81. http://dx.doi.org/10.1108/ilt-11-2015-0164.
Повний текст джерелаDias, Leonardo C., Giuseppe Pintaude, Alessandro A. O. F. Vittorino, and Henara L. Costa. "ZDDP Tribofilm Formation from a Formulated Oil on Textured Cylinder Liners." Lubricants 10, no. 6 (June 7, 2022): 118. http://dx.doi.org/10.3390/lubricants10060118.
Повний текст джерелаKIM, BYUNGHOON, YASUNOBU AKIYAMA, and NOBUYUKI IMAISHI. "Coverage Simulation for Non-Liner Surface Reaction." KAGAKU KOGAKU RONBUNSHU 25, no. 3 (1999): 466–71. http://dx.doi.org/10.1252/kakoronbunshu.25.466.
Повний текст джерелаRisse, Konstantin, Matthias Schorgel, Dirk Bartel, Bernhard Karpuschewski, and Florian Welzel. "Resource-efficient piston ring/cylinder liner pairing." Industrial Lubrication and Tribology 71, no. 1 (January 14, 2019): 154–63. http://dx.doi.org/10.1108/ilt-06-2018-0250.
Повний текст джерелаLawrence K, Deepak, and B. Ramamoorthy. "Surface topography characterization of automotive cylinder liner surfaces using fractal methods." Applied Surface Science 280 (September 2013): 332–42. http://dx.doi.org/10.1016/j.apsusc.2013.04.157.
Повний текст джерелаÖzkan, Doğuş, Hakan Kaleli, and Levent Yüksek. "Quantitative comparison of tribological performance of chromium- and zinc-phosphate-coated piston rings in tribotest rig." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 231, no. 1 (August 5, 2016): 75–92. http://dx.doi.org/10.1177/1350650116646918.
Повний текст джерелаP., Venkateswara Babu, Ismail Syed, and Satish Ben Beera. "Influence of positive texturing on friction and wear properties of piston ring-cylinder liner tribo pair under lubricated conditions." Industrial Lubrication and Tribology 71, no. 4 (May 7, 2019): 515–24. http://dx.doi.org/10.1108/ilt-07-2017-0203.
Повний текст джерелаDemirtas, Selman, Hakan Kaleli, Mahdi Khadem, and Dae-Eun Kim. "Characterization of the friction and wear effects of graphene nanoparticles in oil on the ring/cylinder liner of internal combustion engine." Industrial Lubrication and Tribology 71, no. 5 (July 8, 2019): 642–52. http://dx.doi.org/10.1108/ilt-05-2018-0170.
Повний текст джерелаHu, Yang, Xianghui Meng, Youbai Xie, and Jiazheng Fan. "Study on the frictional performance of slide and plateau honed cylinder liners during running-in." Industrial Lubrication and Tribology 69, no. 2 (March 13, 2017): 282–99. http://dx.doi.org/10.1108/ilt-02-2016-0026.
Повний текст джерелаAl Taweel, Sara Mohammad, Hanan Nejer Al-Otaibi, Nawaf Labban, Afnan AlFouzan, and Huda Al Shehri. "Soft Denture Liner Adhesion to Conventional and CAD/CAM Processed Poly(Methyl Methacrylate) Acrylic Denture Resins-An In-Vitro Study." Materials 14, no. 21 (November 3, 2021): 6614. http://dx.doi.org/10.3390/ma14216614.
Повний текст джерелаBako, Sunday, Abdulkarim Nasir, Bori Ige, and Nicholas Musa. "Canvitation deterioration of diesel power plant cylinder liner." Journal of Mechanical and Energy Engineering 4, no. 3 (December 10, 2020): 239–46. http://dx.doi.org/10.30464/jmee.2020.4.3.239.
Повний текст джерелаLAZAR, VERA V. "MICROMETRY OF CYLINDER LINERS OF YAMZ ENGINES." Agricultural engineering, no. 3 (2022): 51–55. http://dx.doi.org/10.26897/2687-1149-2022-3-51-55.
Повний текст джерелаShastin, V. I., and S. K. Kargapol’tsev. "Laser Modification of the "Ring-Cylinder Liner" Mating Surfaces." Key Engineering Materials 836 (March 2020): 111–17. http://dx.doi.org/10.4028/www.scientific.net/kem.836.111.
Повний текст джерелаMiao, Jiazhi, Yongqing Li, Xiang Rao, Libao Zhu, Zhiwei Guo, and Chengqing Yuan. "Effects of different surface grooved cylinder liner on the tribological performance for cylinder liner-piston ring components." Industrial Lubrication and Tribology 72, no. 5 (September 23, 2019): 581–88. http://dx.doi.org/10.1108/ilt-01-2019-0012.
Повний текст джерелаGrabon, Wieslaw, Waldemar Koszela, Pawel Pawlus, and Slawomir Ochwat. "Improving tribological behaviour of piston ring–cylinder liner frictional pair by liner surface texturing." Tribology International 61 (May 2013): 102–8. http://dx.doi.org/10.1016/j.triboint.2012.11.027.
Повний текст джерелаGrabon, Wieslaw, Pawel Pawlus, Slawomir Wos, Waldemar Koszela, and Michal Wieczorowski. "Evolutions of cylinder liner surface texture and tribological performance of piston ring-liner assembly." Tribology International 127 (November 2018): 545–56. http://dx.doi.org/10.1016/j.triboint.2018.07.011.
Повний текст джерелаGu, Jing, Xiao Mei Huang, and Jian Hua Sui. "Research on Performance of MPIA/PTFE Union Fabric Used as Self-Lubricating Bearings Liner." Advanced Materials Research 796 (September 2013): 225–28. http://dx.doi.org/10.4028/www.scientific.net/amr.796.225.
Повний текст джерелаSpiegelberg, Ben GI, Brent A. Lanting, James L. Howard, Matthew G. Teeter, and Douglas DR Naudie. "Surface integrity of polyethylene liners following trunnionosis of a dual modular neck total hip implant." HIP International 28, no. 6 (May 13, 2018): 629–35. http://dx.doi.org/10.1177/1120700018754336.
Повний текст джерелаV. M, Abishek, Faizudeen N, Chandru S. H, and Palani R. "Design and Analysis of Cylinder Liner with Different Coatings." International Journal for Research in Applied Science and Engineering Technology 10, no. 10 (October 31, 2022): 322–57. http://dx.doi.org/10.22214/ijraset.2022.46987.
Повний текст джерелаYang, Chao Zhen, Zhiwei Guo, and Changkun Xu. "Effect of grooved cylinder liner depths on the tribological performances of cylinder liner-piston ring." Industrial Lubrication and Tribology 72, no. 3 (October 26, 2019): 465–71. http://dx.doi.org/10.1108/ilt-07-2019-0244.
Повний текст джерелаLiu, Cheng, Yanjun Lu, Yongfang Zhang, Lujia Tang, Cheng Guo, and Norbert Müller. "Investigation on the Frictional Performance of Surface Textured Ring-Deformed Liner Conjunction in Internal Combustion Engines." Energies 12, no. 14 (July 18, 2019): 2761. http://dx.doi.org/10.3390/en12142761.
Повний текст джерелаRosen, B.-G., C. Anderberg, and R. Ohlsson. "Parameter correlation study of cylinder liner roughness for production and quality control." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 222, no. 11 (November 1, 2008): 1475–87. http://dx.doi.org/10.1243/09544054jem1201.
Повний текст джерелаAnand, M., M. Hadfield, B. Thomas, and R. Cantrill. "The depletion of ZDDP additives within marine lubricants and associated cylinder liner wear in RNLI lifeboat engines." Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications 231, no. 1-2 (August 19, 2016): 162–70. http://dx.doi.org/10.1177/1464420716663235.
Повний текст джерелаMaldonado, Ana Luisa P., and R. Jeremy Astley. "SwirlProp: A tool for sound propagation and attenuation in swirling flows." International Journal of Aeroacoustics 20, no. 5-7 (September 2021): 588–609. http://dx.doi.org/10.1177/1475472x211052591.
Повний текст джерелаMohamad, Salaheldin A., Qun Zheng, and Xi Qun Lu. "Improving Tribological Behavior of 2-Stroke Marine Diesel Engine Piston Ring by Cylinder Liner Surface Texturing." Applied Mechanics and Materials 620 (August 2014): 278–84. http://dx.doi.org/10.4028/www.scientific.net/amm.620.278.
Повний текст джерелаChandu, GS, Dayanand Ashok Huddar, MN Hombesh, B. Sandhyarani, and Girish Shankar Nanjannawar. "Effect of Denture Cleanser on Weight, Surface Roughness and Tensile Bond Strength of Two Resilient Denture Liners." Journal of Contemporary Dental Practice 13, no. 5 (2012): 607–11. http://dx.doi.org/10.5005/jp-journals-10024-1195.
Повний текст джерелаLanzillo, Nicholas A., and Daniel C. Edelstein. "Reliability and resistance projections for rhodium and iridium interconnects from first-principles." Journal of Vacuum Science & Technology B 40, no. 5 (September 2022): 052801. http://dx.doi.org/10.1116/6.0001980.
Повний текст джерелаZhang, Yanan, Yu Tian, Yulong Zhang, Xuelong Fu, Hao Li, Zhehong Lu, Tengyue Zhang, and Yubing Hu. "Improvement in Migration Resistance of Hydroxyl-Terminated Polybutadiene (HTPB) Liners by Using Graphene Barriers." Polymers 14, no. 23 (November 30, 2022): 5213. http://dx.doi.org/10.3390/polym14235213.
Повний текст джерелаYe, Jianxiong, Linwen Yu, and Yong Chen. "Study on the Mitigative Effect of Controlled Permeable Formwork (CPF) Liner on Early-Age Shrinkage of Box-Girder Concrete." Advances in Materials Science and Engineering 2019 (September 10, 2019): 1–8. http://dx.doi.org/10.1155/2019/4150279.
Повний текст джерелаLi, Cheng-Di, Xiao Chen, Xiao-Wei Zhang, Shun-Jian Xu, Yao Hu, Hui-Hua Jian, and Jiu-Jun Xu. "Friction and wear behavior of Al–Si alloy cylinder liner prepared by surface shaping treatments." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 234, no. 9 (March 1, 2020): 1522–29. http://dx.doi.org/10.1177/1350650120909729.
Повний текст джерелаZhong, Mei Peng, Ju Long Yuan, Wei Feng Yao, and Xiang Chi. "Researcher on Manufacturing Surface of Air Compressor Cylinder by Vibration and Mechanism of Lubrication." Advanced Materials Research 842 (November 2013): 643–46. http://dx.doi.org/10.4028/www.scientific.net/amr.842.643.
Повний текст джерелаLi, Cheng-Di, Bin Li, Mei Jin, Yan Shen, and Jiu-Jun Xu. "Wear behavior of the aluminum-silicon alloy cylinder liner wear against Chrom–Keramik–Schicht piston ring." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 232, no. 2 (May 5, 2017): 136–42. http://dx.doi.org/10.1177/1350650117708138.
Повний текст джерелаLi, Wenhua, Baihong Yu, Yutao Lv, Yan Shen, Ruoxuan Huang, and Fengming Du. "Wear Behavior of CuSn Coated Piston Ring Sliding against Nodular Cast Iron Cylinder Liner under Heavy-Duty Conditions." Metals 9, no. 2 (January 27, 2019): 139. http://dx.doi.org/10.3390/met9020139.
Повний текст джерелаBai, Xin Li, Qian Pan, and Hai Li Su. "Finite Element Analysis of Steel Liner in the Gradual Change Segment of Downstream Dam Surface Penstock." Advanced Materials Research 219-220 (March 2011): 685–88. http://dx.doi.org/10.4028/www.scientific.net/amr.219-220.685.
Повний текст джерелаDeguchi, Akio, Hirotoshi Kitagawa, Shohji Mitsutake, and Noritaka Ooka. "Investigation on Cylinder Liner Surface Conditions by Replica Technique." JOURNAL OF THE MARINE ENGINEERING SOCIETY IN JAPAN 22, no. 10 (1987): 658–62. http://dx.doi.org/10.5988/jime1966.22.658.
Повний текст джерелаAnderberg, C., Z. Dimkovski, and B.-G. Rosén. "Liner surface improvements for low friction piston ring packs." Surface Topography: Metrology and Properties 2, no. 1 (December 30, 2013): 014009. http://dx.doi.org/10.1088/2051-672x/2/1/014009.
Повний текст джерелаDimkovski, Z., F. Cabanettes, H. Löfgren, C. Anderberg, R. Ohlsson, and B. G. Rosén. "Optimization of cylinder liner surface finish by slide honing." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226, no. 4 (February 15, 2012): 575–84. http://dx.doi.org/10.1177/0954405410396154.
Повний текст джерелаMa, Zheng, Naeim A. Henein, Walter Bryzik, and John Glidewell. "Cylinder Liner Surface Analysis During SI Engine Break-In." Tribology Transactions 45, no. 3 (January 2002): 397–403. http://dx.doi.org/10.1080/10402000208982565.
Повний текст джерелаKaras, I., and R. Gálik. "Non-contact thermometry in the milking stopping control system." Czech Journal of Animal Science 50, No. 5 (December 10, 2011): 196–200. http://dx.doi.org/10.17221/4148-cjas.
Повний текст джерелаJones, Michael. "A review of variable-impedance acoustic liner concepts developed at NASA." INTER-NOISE and NOISE-CON Congress and Conference Proceedings 263, no. 5 (August 1, 2021): 1633–44. http://dx.doi.org/10.3397/in-2021-1886.
Повний текст джерелаPusterhofer, Michael, Florian Summer, Daniel Wuketich, and Florian Grün. "Development of a Model Test System for a Piston Ring/Cylinder Liner-Contact with Focus on Near-to-Application Seizure Behaviour." Lubricants 7, no. 12 (November 22, 2019): 104. http://dx.doi.org/10.3390/lubricants7120104.
Повний текст джерела