Добірка наукової літератури з теми "Limiting factors for fuel cell"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Limiting factors for fuel cell".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Limiting factors for fuel cell"
FRENI, S., S. CAVALLARO, M. AQUINO, D. RAVIDA, and N. GIORDANO. "Lifetime-limiting factors for a molten carbonate fuel cell." International Journal of Hydrogen Energy 19, no. 4 (April 1994): 337–41. http://dx.doi.org/10.1016/0360-3199(94)90065-5.
Повний текст джерелаFry, M. R., H. Watson, and J. C. Hatchman. "Design of a prototype fuel cell/composite cycle power station." Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy 211, no. 2 (March 1, 1997): 171–80. http://dx.doi.org/10.1243/0957650971537088.
Повний текст джерелаPapurello, Davide, Andrea Lanzini, Davide Drago, Pierluigi Leone, and Massimo Santarelli. "Limiting factors for planar solid oxide fuel cells under different trace compound concentrations." Energy 95 (January 2016): 67–78. http://dx.doi.org/10.1016/j.energy.2015.11.070.
Повний текст джерелаYurova, Polina A., Viktoria R. Malakhova, Ekaterina V. Gerasimova, Irina A. Stenina, and Andrey B. Yaroslavtsev. "Nafion/Surface Modified Ceria Hybrid Membranes for Fuel Cell Application." Polymers 13, no. 15 (July 30, 2021): 2513. http://dx.doi.org/10.3390/polym13152513.
Повний текст джерелаYim, Chae-Ho, and Yaser Abu-Lebdeh. "Understanding Key Limiting Factors of Electrode and Cell Designs in Solid-State Lithium Batteries." ECS Meeting Abstracts MA2022-01, no. 2 (July 7, 2022): 213. http://dx.doi.org/10.1149/ma2022-012213mtgabs.
Повний текст джерелаJahan, Sarowar, Md Tarikul Islam, and Suman Chowdhury. "Investigation of Power Performance of a PEM Fuel Cell Using MATLAB Simulation." Malaysian Journal of Applied Sciences 5, no. 1 (April 30, 2020): 83–94. http://dx.doi.org/10.37231/myjas.2020.5.1.230.
Повний текст джерелаChick, Larry A., Kerry D. Meinhardt, Steve P. Simner, Brent W. Kirby, Mike R. Powell, and Nathan L. Canfield. "Factors affecting limiting current in solid oxide fuel cells or debunking the myth of anode diffusion polarization." Journal of Power Sources 196, no. 10 (May 2011): 4475–82. http://dx.doi.org/10.1016/j.jpowsour.2011.01.035.
Повний текст джерелаStöver, Detlev, Hans Peter Buchkremer, Andreas Mai, Norbert H. Menzler, and Mohsine Zahid. "Processing and Properties of Advanced Solid Oxide Fuel Cells." Materials Science Forum 539-543 (March 2007): 1367–72. http://dx.doi.org/10.4028/www.scientific.net/msf.539-543.1367.
Повний текст джерелаVlachopoulos, Nick, and Anders Hagfeldt. "Photoelectrochemical Cells Based on Dye Sensitization for Electricity and Fuel Production." CHIMIA International Journal for Chemistry 73, no. 11 (November 1, 2019): 894–905. http://dx.doi.org/10.2533/chimia.2019.894.
Повний текст джерелаCai, Wenfang, and Yunhai Wang. "Investigation of a two-dimensional model on Cu2+ recovery in bioemectrochemical system." IOP Conference Series: Earth and Environmental Science 1135, no. 1 (January 1, 2023): 012013. http://dx.doi.org/10.1088/1755-1315/1135/1/012013.
Повний текст джерелаДисертації з теми "Limiting factors for fuel cell"
Khadke, Prashant Subhas [Verfasser], and Ulrike [Akademischer Betreuer] Krewer. "Analysis of Performance Limiting factors in H2-O2 Alkaline Membrane Fuel Cell / Prashant Subhas Khadke ; Betreuer: Ulrike Krewer." Braunschweig : Technische Universität Braunschweig, 2016. http://d-nb.info/1175818275/34.
Повний текст джерелаKhadke, Prashant Subhas Verfasser], and Ulrike [Akademischer Betreuer] [Krewer. "Analysis of Performance Limiting factors in H2-O2 Alkaline Membrane Fuel Cell / Prashant Subhas Khadke ; Betreuer: Ulrike Krewer." Braunschweig : Technische Universität Braunschweig, 2016. http://nbn-resolving.de/urn:nbn:de:gbv:084-16092811020.
Повний текст джерелаPAPURELLO, DAVIDE. "Biogas from anaerobic digestion of biomass (Organic Fraction of Municipal Solid Waste and sewage sludge): trace compounds characterization through an innovative technique (PTR-MS) and detrimental effects on SOFC energy generators, from single cells to short stacks." Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2544741.
Повний текст джерелаUría, Moltó Naroa. "Microbial fuel cell performance: design, operation and biological factors." Doctoral thesis, Universitat Autònoma de Barcelona, 2012. http://hdl.handle.net/10803/284032.
Повний текст джерелаA Microbial Fuel Cell (MFC) is a bioelectrochemical system, in which bacteria oxidize organic matter and transfer the electrons through their electron transport chains onto an electrode surface producing electricity. The efficiency of the system depends on the metabolic activity of the microorganisms growing at the anode but also on a large number of factors related to the design and operation of the MFC. The purpose of this work is to contribute to the analysis and control of some of these factors as well as to throw some light on the role of different electron transfer mechanisms in MFC operation. To achieve this goal different experiments using the electrogenic bacterium Shewanella oneidensis MR-1 have been carried out. First of all, this works analyses the role of several design factors in MFC performance. This part of the research focuses on the effect of different abiotic catalysts as well as the cathode to anode ratio required for unhindered power output. The results indicate that soluble catalysts such as ferricyanide allow much higher power values, and therefore need smaller cathode/anode ratios than platinum-based cathodes. In the long term, however, MFCs containing soluble iron catalysts show a progressive degradation of fuel cell performance make them unfit for applications requiring extended operations. In recent years, the search for a suitable catalyst at the cathode has led researchers to explore the possible use of biocathodes. In this work, we demonstrate the capacity of Shewanella oneidensis MR-1 to catalyse the cathode reaction both under aerobic and anaerobic conditions, being able to sustain the current provided by bacteria present in the anode. The potential of anode bacteria for current production does not only depend on the levels of microbial activity and on the removal of cathodic limitations but seems to be also affected by factors related to the operation of the system. We have shown the importance of continuous MFC operation as another important factor to take into account for some applications. Periods of circuit interruption produce an alteration of the normal current output in the form of defined current peaks that appear when closing the circuit after a short period of current interruption and that decay slowly back to the original stable values. In depth analysis of this response demonstrates the capacity of Shewanella oneidensis MR-1 to store charge when no electron acceptors are present. Finally, we intended to determine the contribution of the different electron transfer mechanisms to current production in MFCs harbouring complex microbial communities. The MFC with a naked anode shows that direct electron transfer mechanisms are responsible for most of the current generated. The microbial community formed agrees with the electron transfer pathways available. So, this MFC presents species able of direct and mediated electron transfer as Shewanella, Aeromonas, Pseudomonas or Propionibacterium. The MFC sustained by shuttle-dependent electron transfer follows in importance being responsible for as much as 40% of current output. This reactor shows a great quantity of different redox species in the anolyte bulk, some of them not related to mediators currently described in the literature. Finally, in the MFC with a nafion-coated anode, the only chemical species able to diffuse to the anode surface is hydrogen. In this case, current production is sustained by the interaction between some organisms, such as Comamonas, Alicycliphilus, Diaphorobacter or the archaea Methanosaeta and the anode. Oxidation of acetate by these microorganisms results in hydrogen production that is therefore oxidised at the anode surface after crossing the nafion barrier. Current production by this mechanism would account for not more than 5% of the total current evolved in an unrestricted MFC.
BONA, DENIS. "Study on the key factors allowing the PEM fuel cell systems large commercialization: fuel cell degradation and components integration." Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2537914.
Повний текст джерелаMarcum, Allen McDonald 1961. "Study of factors around automotive fuel cell implementation and market acceptance." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/8884.
Повний текст джерелаIncludes bibliographical references (p. 78-79).
There are data that suggest that the earth's surface temperature has. increased over the past century. Many scientists believe that this rise is due to the emissions of greenhouse gases by anthropogenic sources, while others believe it is due primarily to natural phenomena, such as solar cycles. Regardless of the actual cause, we should be motivated to drastically reduce · emissions of these gases, improve fuel efficiency, and reduce other type of air pollution. This will also reduce the country's reliance on potentially unstable foreign sources of these fuels. There are many technologies currently being developed which promise to reduce our consumption of fossil fuels in automotive applications, including direct injection internal combustion engines, hybrid engines, battery-powered cars, fuel cells, 42-volt electrical systems, and lightweight bodies. When considered on total lifecycle and infrastructure bases, there can be significant downsides associated with any of these technological improvements, but each also offers a potential contribution to lowering fuel consumption. This thesis proposes that there are steps that can be taken to enhance the mainstream acceptance and benefits of these technologies, including early electrification of loads onboard vehicles, incremental reductions in consumption, and use of fleets to implement technologies requiring new infrastructure buildouts. However, automotive emissions are a small part of the overall emission problem, and we should also be concentrating efforts in other areas as well.
by Allen McDonald Marcum.
S.M.M.O.T.
Colon-Jimenez, Lisandra. "Factors limiting spontaneous repair and their relevance for the efficiency of stem cell therapy of infarcted hearts." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1266171874.
Повний текст джерелаDyantyi, Noluntu. "Factors influencing fuel cell life and a method of assessment for state of health." University of the Western Cape, 2018. http://hdl.handle.net/11394/6753.
Повний текст джерелаProton exchange membrane fuel cells (PEMFC) converts chemical energy from the electrochemical reaction of oxygen and hydrogen into electrical while emitting heat, oxygen depleted air (ODA) and water as by-products. The by-products have useful functions in aircrafts, such as heat that can be used for ice prevention, deoxygenated air for fire retardation and drinkable water for use on board. Consequently, the PEMFC is also studied to optimize recovery of the useful products. Despite the progress made, durability and reliability remain key challenges to the fuel cell technology. One of the reasons for this is the limited understanding of PEMFC behaviour in the aeronautic environment. The aim of this thesis was to define a comprehensive non-intrusive diagnostic technique that provides real time diagnostics on the PEMFC State of Health (SoH). The framework of the study involved determining factors that have direct influence on fuel cell life in aeronautic environment through a literature survey, examining the effects of the factors by subjecting the PEMFC to simulated conditions, establishing measurable parameters reflective of the factors and defining the diagnostic tool based on literature review and this thesis finding.
Biz, Chiara. "Electronic and magnetic factors in the design of optimum catalysts for hydrogen fuel cells." Doctoral thesis, Universitat Jaume I, 2022. http://dx.doi.org/10.6035/14104.2022.709278.
Повний текст джерелаPrograma de Doctorat en Ciències
Morgan, Jason. "Towards an Understanding of the Gas Diffusion Layer in Polymer Electrolyte Membrane Fuel Cells." Digital WPI, 2016. https://digitalcommons.wpi.edu/etd-dissertations/555.
Повний текст джерелаКниги з теми "Limiting factors for fuel cell"
Tsai, Ching-Wei, Sanjeev Noel, and Hamid Rabb. Pathophysiology of Acute Kidney Injury, Repair, and Regeneration. Oxford University Press, 2014. http://dx.doi.org/10.1093/med/9780199653461.003.0030.
Повний текст джерелаЧастини книг з теми "Limiting factors for fuel cell"
Kazim, Ayoub. "Determination of an Optimum Performance of a PEM Fuel Cell Based on its Limiting Current Density." In Hydrogen Materials Science and Chemistry of Carbon Nanomaterials, 159–66. Dordrecht: Springer Netherlands, 2004. http://dx.doi.org/10.1007/1-4020-2669-2_16.
Повний текст джерелаPedrazzoli, Paolo, and John B. A. G. Haanen. "Developments in Solid Tumours." In The EBMT/EHA CAR-T Cell Handbook, 105–8. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-94353-0_19.
Повний текст джерелаGolz, Julia Carolin, and Kerstin Stingl. "Natural Competence and Horizontal Gene Transfer in Campylobacter." In Current Topics in Microbiology and Immunology, 265–92. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65481-8_10.
Повний текст джерелаSalminen, Justin, and Tanja Kallio. "Battery and Fuel Cell Materials." In Materials for a Sustainable Future, 537–57. The Royal Society of Chemistry, 2012. http://dx.doi.org/10.1039/bk9781849734073-00537.
Повний текст джерелаJung, Sokhee P., and Soumya Pandit. "Important Factors Influencing Microbial Fuel Cell Performance." In Microbial Electrochemical Technology, 377–406. Elsevier, 2019. http://dx.doi.org/10.1016/b978-0-444-64052-9.00015-7.
Повний текст джерелаAtkinson, Alan. "Solid Oxide Fuel Cell Electrolytes—Factors Influencing Lifetime." In Solid Oxide Fuel Cell Lifetime and Reliability, 19–35. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-08-101102-7.00002-7.
Повний текст джерелаGuo, Ting, Kankan Wang, Huikai Chang, Fang Wang, Rongliang Liang, Shiyu Wu, Zhenyu Nie, Zhijun Wang, and Guozhuo Wang. "Fuel Cell Engine Fault Analysis." In Advances in Transdisciplinary Engineering. IOS Press, 2022. http://dx.doi.org/10.3233/atde220282.
Повний текст джерелаSterlich, Katharina, and Milen Minkov. "Childhood Langerhans Cell Histiocytosis: Epidemiology, Clinical Presentations, Prognostic Factors, and Therapeutic Approaches." In Rare Diseases [Working Title]. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.96543.
Повний текст джерелаYeetsorn, Rungsima, and Yaowaret Maiket. "Hydrogen Fuel Cell Implementation for the Transportation Sector." In Hydrogen Implementation in Transportation Sector [Working Title]. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.95291.
Повний текст джерелаShaukat, Syed, and Cheng-Lung Wu. "Impact of Hydrogen Fuel Cell Technology on Aircraft Maintenance." In Challenges and Opportunities for Aviation Stakeholders in a Post-Pandemic World, 49–63. IGI Global, 2023. http://dx.doi.org/10.4018/978-1-6684-6835-7.ch003.
Повний текст джерелаТези доповідей конференцій з теми "Limiting factors for fuel cell"
Wang, Yun. "Dynamic Characteristics of Polymer Electrolyte Fuel Cell and Hydrogen Tank." In 2010 14th International Heat Transfer Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/ihtc14-23005.
Повний текст джерелаShiomi, Daisuke, Hiroshi Iwai, Kenjiro Suzuki, and Hideo Yoshida. "Numerical Study on Transient Characteristics of a Tubular SOFC Cell." In ASME 2005 3rd International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2005. http://dx.doi.org/10.1115/fuelcell2005-74171.
Повний текст джерелаMukherjee, Partha P., and Chao-Yang Wang. "A Catalyst Layer Flooding Model for Polymer Electrolyte Fuel Cells." In ASME 2008 6th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/fuelcell2008-65021.
Повний текст джерелаBarbir, Frano, Bhaskar Balasubramanian, and Jay Neutzler. "Trade-Off Design Analysis of Operating Pressure and Temperature in PEM Fuel Cell Systems." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0840.
Повний текст джерелаNelson, George J., Comas Haynes, and William Wepfer. "Performance Metrics for Solid Oxide Fuel Cell Cross-Section Design." In ASME 2009 7th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2009. http://dx.doi.org/10.1115/fuelcell2009-85087.
Повний текст джерелаShare, Dylan, Lakshmi Krishnan, Dan Walczyk, David Lesperence, and Raymond Puffer. "Thermal Sealing of Membrane Electrode Assemblies for High-Temperature PEM Fuel Cells." In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33227.
Повний текст джерелаNelson, George, and Comas Haynes. "Parametric Studies of Constriction Resistance Effects Upon Solid Oxide Cell Transport Phenomena." In ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-15100.
Повний текст джерелаKno¨ri, T., M. Schulze, and K. A. Friedrich. "Determination of Local Conditions in PEFCs by Combining Spatially Resolved Current Density Measurements With Real-Time Modelling." In ASME 2008 6th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/fuelcell2008-65225.
Повний текст джерелаShiomi, Takeshi, Richard S. Fu, Ugur Pasaogullari, Yuichiro Tabuchi, Shinichi Miyazaki, Norio Kubo, Kazuhiko Shinohara, Daniel S. Hussey, and David L. Jacobson. "Effect of Liquid Water Saturation on Oxygen Transport in Gas Diffusion Layers of Polymer Electrolyte Fuel Cells." In ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2010. http://dx.doi.org/10.1115/fuelcell2010-33225.
Повний текст джерелаTahseen, Siddiq Husain, Abbas S. Milani, and Mina Hoorfar. "Sensitivity Analysis of Mass Transport Properties of Gas Diffusion Layers of Polymer Electrolyte Membrane Fuel Cells." In ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 Fluids Engineering Division Summer Meeting. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/icnmm2012-73107.
Повний текст джерелаЗвіти організацій з теми "Limiting factors for fuel cell"
Or, Dani, Shmulik Friedman, and Jeanette Norton. Physical processes affecting microbial habitats and activity in unsaturated agricultural soils. United States Department of Agriculture, October 2002. http://dx.doi.org/10.32747/2002.7587239.bard.
Повний текст джерелаMeidan, Rina, and Robert Milvae. Regulation of Bovine Corpus Luteum Function. United States Department of Agriculture, March 1995. http://dx.doi.org/10.32747/1995.7604935.bard.
Повний текст джерелаAnalysis of environmental factors impacting the life cycle cost analysis of conventional and fuel cell/battery-powered passenger vehicles. Final report. Office of Scientific and Technical Information (OSTI), January 1995. http://dx.doi.org/10.2172/366490.
Повний текст джерела