Дисертації з теми "Limb bud"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Limb bud".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Vargesson, Neil Andrew. "Cell fate and signalling in chick limb bud development." Thesis, University College London (University of London), 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.287476.
Повний текст джерелаAli-Khan, Sarah Esme. "Molecular mechanisms of Vitamin A-induced limb defects in the mid-organogenesis-stage mouse limb bud." Thesis, McGill University, 2006. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=102475.
Повний текст джерелаMiura, Takashi. "Mechanism of chondrogenic pattern formation in mouse limb bud micromass culture." Kyoto University, 2000. http://hdl.handle.net/2433/157002.
Повний текст джерелаKyoto University (京都大学)
0048
新制・課程博士
博士(医学)
甲第8234号
医博第2190号
新制||医||730(附属図書館)
UT51-2000-F138
京都大学大学院医学研究科生理系専攻
(主査)教授 開 祐示, 教授 井手 千束, 教授 塩田 浩平
学位規則第4条第1項該当
Marr, Misti Lane. "DISCOVERY OF PROTEINS SECRETED BY CHICK LIMB BUD CELLS IN RESPONSE TO MECHANICAL LOADING." MSSTATE, 2009. http://sun.library.msstate.edu/ETD-db/theses/available/etd-12082009-140639/.
Повний текст джерелаAllen, John C. "FGF4 Induced Wnt5a Gradient in the Limb Bud Mediates Mesenchymal Cell Directed Migration and Division." BYU ScholarsArchive, 2013. https://scholarsarchive.byu.edu/etd/4309.
Повний текст джерелаQiu, Qingchao. "TGF-β, WNT, AND FGF SIGNALING PATHWAYS DURING AXOLOTL TAIL REGENERATION AND FORELIMB BUD DEVELOPMENT". UKnowledge, 2019. https://uknowledge.uky.edu/neurobio_etds/24.
Повний текст джерелаMella, Sébastien. "Histoire évolutive des facteurs de transcription de la famille COE : expression comparée au cours de la morphogenèse de l'aile de drosophile et des membres de tétrapodes et évolution de leur structure génomique chez les bilatériens." Toulouse 3, 2004. http://www.theses.fr/2004TOU30294.
Повний текст джерелаThe thesis focuses on the evolution of coe transcription factor family. Behind the obvious morphological differences between a Drosophila wing and a tetrapod limb, the same signalling pathway, namely the Hedgehog/Sonic-hedgehog (HH/Shh) pathway, sets up the antero-posterior polarity. During Drosophila wing morphogenesis, collier is a key mediator of the Hh signalisation. In a first approach, the coe genes expression in tetrapod limb bud development and its relationship with Shh signalisation has been analysed. The analysis of coe expression in wild type mouse and chick developing limb bud revealed these genes as first known markers for ligaments and tendon protecting-casing. The analysis of coe genes expression in several mouse mutant strains, coupled with graft experiments in chick limb buds, strongly suggest that the molecular pathway involving Collier in the Drosophila wing is not conserved in the tetrapod limb. To determine the function of coe genes during tetrapod limb morphogenesis, a strategy based on the contruction of a Dominant-Negative COE protein (COE-DN) has been undertaken. The biochemical characteristics of the COE-DN has been determined in vivo, using transgenic flies, in which controlled expression of this COE-DN can be compared with the phenotype of collier null mutation
Hardy, Adrian Paul. "Development of reaggregated chick limb buds." Thesis, University College London (University of London), 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.338891.
Повний текст джерелаThorn, Rebecca Emily. "Metric number theory : the good and the bad." Thesis, Queen Mary, University of London, 2005. http://qmro.qmul.ac.uk/xmlui/handle/123456789/28568.
Повний текст джерелаLesnicar-Pucko, Gaja 1981. "Cellular mechanisms behind vertebrate limp outgrowth." Doctoral thesis, Universitat Pompeu Fabra, 2014. http://hdl.handle.net/10803/346928.
Повний текст джерелаEn aquest projecte utilitzem una nova tècnica de microscòpia in vivo, així com l’anàlisi del comportament cel.lular per tal d’investigar les bases cel.lulars de l’elongació de l’extremitat durant el desenvolupament embrionari. Investigacions recents clarament indiquen que activitats cel.lulars orientades estan involucrades en aquest procès, i d’entre elles la migració cel.lular i la divisió cel.lular orientada semblen les candidates més probables. Aquí presentem un estudi exhaustiu enfocat principalment en l’orientació cel.lular i el comportament cel.lular actiu durant el desenvolupament de l’extremitat del pollet. Trobem que les cel.lules s’orienten cap a l’ectodermi més proper i es divideixen al llarg a l’axis més llarg, així com veiem que, malgrat que el moviment cel.lular global mostra una tendència distal, la migració activa de cel.lules individuals sembla ser aleatòria. Donat que els nostres resultats no recolzen la teoria d’una migració distalment orientada amb divisió cel.lular orientada, proposem la intercal.lació cel.lular com al comportament cel.lular més probable involucrat en la morfogènesi de l’extremitat. Aquesta nova hipòtesi es veu validada mitjançant un model computacional de Cellular Potts que confirma el nostre supòsit
Kolodziejczyk, Steven Michael. "The role of BMP-2 and TGF-beta during early development and patterning of the avian mandible and limb buds." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp02/NQ49271.pdf.
Повний текст джерелаLee, Mary P. "Identification of Twist1 Target Genes in Mesenchymal Cell Populations." University of Cincinnati / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1378394058.
Повний текст джерелаNunes, Renata Aguiar. "Procedimentos, matéria, efeitos: ética e estética nos contos de Lima Barreto." www.teses.ufc.br, 2013. http://www.repositorio.ufc.br/handle/riufc/8120.
Повний текст джерелаSubmitted by Márcia Araújo (marcia_m_bezerra@yahoo.com.br) on 2014-05-20T14:14:19Z No. of bitstreams: 1 2013_dis_ranunes.pdf: 1497183 bytes, checksum: 30f1942b7611747076fcb6e0e9e002cd (MD5)
Approved for entry into archive by Márcia Araújo(marcia_m_bezerra@yahoo.com.br) on 2014-05-20T14:35:16Z (GMT) No. of bitstreams: 1 2013_dis_ranunes.pdf: 1497183 bytes, checksum: 30f1942b7611747076fcb6e0e9e002cd (MD5)
Made available in DSpace on 2014-05-20T14:35:16Z (GMT). No. of bitstreams: 1 2013_dis_ranunes.pdf: 1497183 bytes, checksum: 30f1942b7611747076fcb6e0e9e002cd (MD5) Previous issue date: 2013
A crítica em torno da obra de Lima Barreto apresentou um importante avanço nas últimas décadas, ao adotar uma postura mais coerente com os princípios éticos e estéticos assumidos pelo escritor. Com um projeto criador dissonante dos preceitos literários que o cercavam, Lima foi rechaçado pela crítica literária de sua época, cujas concepções literárias se chocavam com as suas. Apenas a partir dos anos 70, estudos desenvolvidos por Antonio Arnoni Prado (1989) e Osman Lins (1976) passaram a apresentar um novo olhar sobre os elementos que constituem a obra desse autor, sobretudo no que tange aos seus romances. Entretanto, os contos, importante parcela da obra barretiana, não receberam a devida atenção por parte da crítica, demandando estudos que lhes esclareçam a constituição e a relação com o propósito ético e estético do escritor. Tais textos apresentam a mesma postura crítica e concepção de forma que se destaca nos seus romances, sendo esta caracterizada por uma estrutura extensiva e solta. Se, para o gênero romanesco, a falta de unidade que subjaz a esse tipo de ordenação poderia representar um entrave na constituição de uma forma literária válida, tratando-se de uma narrativa curta, como o conto, a questão tornar-se-ia ainda mais complexa. A fim de denunciar e propor reflexões acerca das problemáticas que compunham o cenário da Primeira República, Lima submete a forma de seus contos à matéria e aos efeitos visados, desprendendo-se de modelos fixos. Dessa maneira, verifica-se que a estética e a matéria dos contos do autor seguem um caminho contrário não só aos padrões cultivados pelos escritores e intelectuais aclamados no início do século XX, mas também aos pressupostos defendidos por renomados teóricos do gênero, como Poe e Cortázar. Acredita-se que a composição dos contos de Lima Barreto está ligada ao seu projeto ético e estético, o qual tem por escopo a ruptura com os padrões literários vigentes em sua época somada ao conhecimento crítico e à denúncia de mazelas referentes ao início do período republicano. Diante disso, esta pesquisa investiga, nos contos barretianos, os elementos internos que os constituem e as suas relações com o propósito ético e estético que norteia o trabalho do escritor, a fim de evidenciar a intrínseca ligação entre os procedimentos literários empregados na composição dos contos, os efeitos visados a partir de sua organização e a matéria representada.
Gao, Yang. "Low-temperature removal of hydrogen chloride from flue gas using hydrated lime as a sorbent." Ohio : Ohio University, 1999. http://www.ohiolink.edu/etd/view.cgi?ohiou1175884147.
Повний текст джерелаHejazi, Bijan. "Modeling of biomass steam gasification in a dual fluidized bed reactor with/without lime-based CO₂ capture." Thesis, University of British Columbia, 2017. http://hdl.handle.net/2429/60663.
Повний текст джерелаApplied Science, Faculty of
Chemical and Biological Engineering, Department of
Graduate
Hopkins, Susan Jane. "Disuse osteopenia : the short- and long-term effects of post-traumatic and post-surgical immobilisation following lower limb injury or total knee replacement." Thesis, University of Exeter, 2013. http://hdl.handle.net/10871/13721.
Повний текст джерелаMiokovic, Tanja [Verfasser]. "Atrophy of the postero-lateral hip and lower-limb musculature during bed-rest and the influence of two different resistive countermeasure exercises / Tanja Miokovic." Berlin : Medizinische Fakultät Charité - Universitätsmedizin Berlin, 2015. http://d-nb.info/106820883X/34.
Повний текст джерелаПрисяжнюк, Роман Володимирович, та Roman Volodymyrovych Prysyazhnyuk. "Проект автотранспортного підприємства для технічного обслуговування та ремонту ходової частини автобусів ЛАЗ 696 з дослідженням та підвищенням довговічності за рахунок зношування рисунку протектора". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2018. http://elartu.tntu.edu.ua/handle/lib/26676.
Повний текст джерелаPrysyazhnyuk R.V. Plans and specifications of motor transportation company for buses LAZ 696 undercarriage maintenance and repair including the study of longevity increase due to wheel thread wear. 274 " Automobile transport " - Ternopil Ivan Puluj National Technical University.- Ternopil 2018. In the master's work maintenance and repair of running gear of buses with the research of durability due to wearing of a tread pattern is carried out. The technological process of puncture pneumatic tire repair at the enterprise has been developed. The ways of its restoration are analyzed and the optimal one is chosen. Technological tire repair cards have been developed
Спеціальна, Галина Володимирівна, та Halyna Specialna. "Розроблення розкладу руху громадського транспорту (на прикладі м. Дубно)". Bachelor's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2021. http://elartu.tntu.edu.ua/handle/lib/35374.
Повний текст джерелаThe first section analyzes the object of study. In particular, the methods of optimizing the schedule of public transport are considered, the city bus network of Dubno, the transport infrastructure of the city, highways and road transport, the main network, urban passenger transport are analyzed, the bus routes of Dubno and duplicate bus sections of Dubno are described. . In the second section, the bus schedule on duplicate sections was improved. The calculation of the objective function and the effect of reducing the waiting time. The third section is devoted to issues of life safety and labor protection.
Притолюк, Сергій Васильович. "Проект автотранспортного підприємства для технічного обслуговування та ремонту гідросистеми рульового керування автобусів БАЗ-2215 з дослідження розподілу пасажиропотоку". Master's thesis, ТНТУ, 2018. http://elartu.tntu.edu.ua/handle/lib/26657.
Повний текст джерелаВ магістерській роботі виконано технічне обслуговування та ремонту гідросистеми рульового керування автобусів БАЗ-2215. Удосконалено організацію пасажирських перевезень з розробкою математичної моделі та алгоритму розрахунку раціонального розподілу транспортних засобів на маршруті
In the master's work the maintenance and repair of the hydrosystem of steering of buses BAZ-2215 was performed. Improved passenger transportation organization with the development of mathematical model and algorithm for calculating rational distribution of vehicles on the route
Ткачук, Владислав-Сергій Сергійович, та Vladyslav-Serhii Tkachuk. "Покращення виробничо-технічної бази автотранспортного підприємства на 82 автобусів для подальшої діагностики, з дослідженням методики визначення зусилля монтажу та демонтажу підшипників". Master's thesis, ТНТУ, ФМТ, кафедра автомобілів, Тернопіль, Україна, 2021. http://elartu.tntu.edu.ua/handle/lib/36885.
Повний текст джерелаІn this graduation thesis іmprovement of production and technical facilities of a motor transportation company of 82 buses for the further diagnostics and the study of technique of bearings installation and removal efforts determination.
Вступ. 1 ЗАГАЛЬНО-ТЕХНІЧНИЙ РОЗДІЛ. 1.1 Діагностування та ремонт рухомого складу. 1.2 Висновки та постановка завдання на магістерську роботу. 2 ТЕХНОЛОГІЧНИЙ РОЗДІЛ. 2.1 Обґрунтовування інноваційних рішень при вдосконаленні технологічного процесу діагностування. 2.3 Розрахунок кількості технологічного обладнання. 2.4 Технологічний розрахунок виробничого корпусу на 82 автобуса. 2.4.1 Розрахунок виробничої програми технічного обслуговування автобусів 2.4.2 Розрахунок річного об'єму робіт по ТО, ПР і самообслуговуванню корпусу. 2.4.3 Розрахунок чисельності виробничих робітників.. 2.4.4 Розрахунок постів ТО і ПР автобусів. 2.5 Розрахунок економічної ефективності роботи. 3 КОНСТРУКТОРСЬКИЙ РОЗДІЛ. 3.1 Будова, принцип роботи та перевірочний розрахунок стенду для перевірки генераторів, стартерів, реле-регуляторів. 3.2 Перевірочний розрахунок гвинт-гайка стенду Е-213. 4 НАУКОВО-ДОСЛІДНИЙ РОЗДІЛ. 4.1 Діагностика підшипників маточин коліс методом шумо-акустичного неруйнівного контролю. 4.2 Оцінювання результатів зношування підшипників. 5 ОХОРОНА ПРАЦІ ТА БЕЗПЕКА В НАДЗВИЧАЙНИХ СИТУАЦІЯХ. 5.1 Заходи по поліпшенню умов праці. 5.2 Заходи з цивільного захисту при надзвичайних ситуаціях. ЗАГАЛЬНІ ВИСНОВКИ. БІБЛІОГРАФІЯ. ДОДАТКИ
Крайничин, Володимир Анатолійович, та Volodymyr Anatoliyovych Krainychyn. "Удосконалення організації міських пасажирських перевезень (на прикладі м. Тернопіль)". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2018. http://elartu.tntu.edu.ua/handle/lib/26563.
Повний текст джерелаХавтур, Павло Володимирович, та Khavtur P. V. "Управління транспортною системою пасажирських перевезень (на прикладі м. Тернопіль)". Master's thesis, ТНТУ, 2019. http://elartu.tntu.edu.ua/handle/lib/30526.
Повний текст джерелаThe first section discusses the theoretical basics of passenger transportation and consumer needs. The second section analyzes the transport processes of passenger transportation by bus in Ternopil. Statistical researches of change of passenger flows are carried out and regularities of their change in time are determined. The third section elaborates measures to rationalize the use of transport on transportation routes. The choice of a rational mode of bus operation on routes. The rational composition of the rolling stock park by hours of the day was determined. The special part deals with the use of intelligent transport systems in transport management. The economic indicators of the proposed solutions are also defined. In the section "Occupational Safety and Health in Emergency Situations", ways of improving working conditions have been elaborated and the issue of safety in emergencies has been considered. The Ecology section addresses environmental issues related to the project.
ВСТУП 1. ТЕОРЕТИЧНІ ОСНОВИ ПЕРЕВЕЗЕННЯ ПАСАЖИРІВ. ПОТРЕБИ СПОЖИВАЧІВ 1.1 Основні фактори, що визначають обсяги та структуру пасажирських перевезень 1.2 Соціальне значення транспортного обслуговування людей і загальні поняття про сервіс 1.3 Задачі транспортного сервісу в пасажирських перевезеннях 2. МОДЕЛЬ ОРГАНІЗУВАННЯ ДІЯЛЬНОСТІ НА МІСЬКИХ МАРШРУТАХ М. ТЕРНОПІЛЬ 2.1 Дослідження маршрутної мережі та системи організування пасажирських перевезень у м. Тернопіль 2.1.1 Загальна оцінка маршрутної мережі м. Тернопіль 2.1.2 Аналізування потоків пасажирів на досліджуваних міських автобусних маршрутах 2.2 Статистичні дослідження зміни потоку пасажирів у часі 2.2.1 Теоретичні основи статистичного дослідження пасажиропотоків 2.2.2 Визначення закономірностей зміни потоків пасажирів у часі 2.3 Розрахунок розподілу пасажиропотоку 3. ШЛЯХИ ОПТИМІЗАЦІЇ МІСЬКИХ АВТОБУСНИХ МАРШРУТІВ 3.1 Розроблення мір з раціоналізації застосування транспорту на маршрутах розвезення 3.1.1 Віднаходження ефективної ємності автобусів 3.1.2 Обчислення ефективної чисельності ТЗ 3.1.3 Вибір раціонального режиму роботи автобусів на маршрутах 3.2 Раціоналізація маршрутних автобусів 3.2.1 Визначення раціонального складу парку рухомого складу за годинами доби 3.2.2 Розрахунок чисельності автобусів, які обслуговують пасажирів 4. СПЕЦІАЛЬНА ЧАСТИНА 4.1 Національна транспортна стратегія України 4.2 Застосування ІТС на пасажирському транспорті 5. ОБҐРУНТУВАННЯ ЕКОНОМІЧНОЇ ЕФЕКТИВНОСТІ 6. ОХОРОНА ПРАЦІ ТА БЕЗПЕКА В НАДЗВИЧАЙНИХ СИТУАЦІЯХ 6.1 Нормативно-правова база з охорони праці в галузі 6.2 Вимоги безпеки до приміщень та обладнання для наукових досліджень 6.3 Охорона праці при виконанні наукових досліджень 6.4. Організація цивільного захисту при надзвичайних ситуаціях 6.5 Індивідуальне завдання 6.5.1 Розрахунок захисного заземлення 6.5.2 Розрахунок струмового перенавантаження електричної мережі в лабораторії 7. ЕКОЛОГІЯ ВИСНОВКИ ПЕРЕЛІК ПОСИЛАНЬ ДОДАТКИ
Троцюк, Тетяна Миколаївна, та Tetiana Mykolaivna Trotsiuk. "Дослідження мобільності пасажирів на маршруті Шумськ-Ходаки на прикладі Тернопільського АТП 16127". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2020. http://elartu.tntu.edu.ua/handle/lib/33945.
Повний текст джерелаВ даній дипломній роботі розглянуто питання дослідження та вдосконалення перевезення пасажирів на приміському маршруті Шумськ-Ходаки. Мета проекту – аналіз організації пасажирських перевезень, обґрунтування доцільності впровадження нововведень з метою вдосконалення якості надання транспортних послуг на маршруті.
ВСТУП 7 1 ТЕОРЕТИЧНИЙ РОЗДІЛ 8 1.1 Аналіз об’єкту дослідження, автобусного маршруту «Шумськ – Ходаки» 8 1.2 Діяльність підприємства Тернопільське АТП 16127» 10 1.3 Шляхи підвищення ефективності транспортних перевезень 16 2 АНАЛІТИКО-ДОСЛІДНИЦЬКИЙ РОЗДІЛ 17 2.1 Обґрунтування техніко-експлуатаційних показників транспортного процесу на маршруті Тернопіль-Шумськ 18 2.2 Аналіз маршрутних схем з позначенням небезпечних місць, нормування швидкостей руху на маршруті Тернопіль-Шумськ 21 2.3 Обґрунтування режимів руху рухомого складу 23 2.4 Розрахунок показників автобусів на приміському маршруті Тернопіль-Шумськ 25 2.5 Розрахунок коефіцієнтів технічної готовності автобусів і випуску парку 28 2.6 Визначення техніко-експлуатаційних показників роботи автобуса за рік 29 3 ПРОЕКТНО-РЕКОМЕНДАЦІЙНИЙ РОЗДІЛ 33 3.1 Організація диспетчерського керівництва і контроль за роботою автобусів на маршрутах 33 3.2 Організація праці водіїв і складання графіку їх роботи 35 3.3 Тарифікація маршрутів і організація збору і здачі виручки 38 3.4 Заходи по економії паливно-мастильних матеріалів 39 3.5 Економічна ефективність прийнятих рішень 40 3.5.1 Розрахунок загального річного фонду заробітної плати з відраховуванням єдиного соціального внеску 40 3.5.2 Розрахунок матеріальних витрат 45 3.5.3 Розрахунок амортизаційних відрахувань на відновленні рухомого складу 3.5.4 Калькуляція собівартості перевезень 49 3.5.5 Розрахунок фінансових показників проекту 54 3.5.6 Техніко-економічні показники проекту 55 4 ОХОРОНА ПРАЦІ ТА БЕЗПЕКА В НАДЗВИЧАЙНИХ СИТУАЦІЯХ 60 4.1 Охорона праці при реалізації удосконаленого транспортного процесу 60 4.2 Захист персоналу та навколишнього середовища від небезпечних виробничих факторів 64 ВИСНОВКИ 67 ПЕРЕЛІК ПОСИЛАНЬ 68
Дмитрик, Андрій Іванович, та Andrii Ivanovych Dmytryk. "Удосконалення процесу пасажирських перевезень на маршруті Тернопіль - Заліщики (на прикладі ПрАТ "Тернопільське АТП 16127")". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2021. http://elartu.tntu.edu.ua/handle/lib/36863.
Повний текст джерелаВ першому розділі розглянуто автотранспортне підприємство, його недоліки та пропозиції з покращення існуючої організації. В другому розділі розраховано показники маршруту та запропоновано інший транспортний засіб. В третьому розділі розраховано показники роботи та визначено ефективність запропонованих рішень. В четвертому розділі розглянуто охорони праці та безпеки в надзвичайних ситуаціях на автотранспорті. Кваліфікаційна робота викладена на 55 сторінках. Робота складається з вступу, чотирьох розділів і висновків. Для написання кваліфікаційної роботи було використано 22 літературних джерела.
The first section discusses the trucking company, its shortcomings and suggestions for improving the existing organization. In the second section, the route indicators are calculated and another vehicle is proposed. The third section calculates performance indicators and determines the effectiveness of the proposed solutions. The fourth section deals with occupational safety and health in motor vehicles. Qualification work is presented on 55 pages. The work consists of an introduction, four chapters and conclusions. 22 literature sources were used to write the dissertation.
Каленик, Андрій Анатолійович, та Andrii Kalenyk. "Оптимізація роботи системи електропостачання електромеханічного заводу". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, кафедра електричної інженерії,Тернопіль, Україна, 2021. http://elartu.tntu.edu.ua/handle/lib/36690.
Повний текст джерелаУ кваліфікаційній роботі на основі прийнятих критеріїв оптимізації запропоновані технічні рішення щодо оптимальної роботи системи електропостачання підприємства. Проведені розрахунки електричних навантажень на ланках 10 кВ та на РТП 35/10 кВ дозволили збалансувати навантаження на секційних шинах. Запропоновані технічні рішення щодо забезпечення надійності електропостачання на основі вибору захисного обладнання на ланках 10кВ та 35 кВ. Проведені дослідження щодо функціонування силових трансформаторів 10/0,4кВ в різних режимах навантаження для забезпечення надійності.
In the qualification work on the basis of the accepted optimization criteria the technical decisions concerning optimum work of system of power supply of the enterprise are offered. The calculations of electrical loads on 10 kV links and on DTS 35/10 kV allowed to balance the loads on sectional busbars. To ensure technical solutions the reliability of electricity supply based on the choice of protective equipment at 10 kV and 35 kV. Studies on the operation of 10 / 0.4 kV power transformers in different load modes to ensure reliability.
ВСТУП ... 6 1 АНАЛІТИЧНИЙ РОЗДІЛ ... 8 1.1 Вибір критеріїв оптимізації системи електропостачання підприємства ... 7 1.2 Аналіз розподільних ланок системи електропостачання підприємства ... 12 1.3 Висновки по першому розділі ... 16 2 РОЗРАХУНКОВО-ДОСЛІДНИЦЬКИЙ РОЗДІЛ ... 18 2.1 Розрахунок електричних навантажень на ланках 10 кВ ... 18 2.2 Вибір перерізу кабельних ліній ... 22 2.3 Дослідження кількості та потужності силових трансформаторів на ланках 10/0,4 кВ ... 23 2.4 Аналіз та оптимізація компенсації реактивної потужності на підприємстві ... 28 2.5 Дослідження надійності силових трансформаторів при різних режимах роботи ... 30 2.6 Висновки по другому розділі ... 35 3 ПРОЕКТНО-КОНСТРУКТОРСЬКИЙ РОЗДІЛ ... 37 3.1 Розрахунок струмів короткого замикання ... 37 3.2 Вибір захисного електричного обладнання на РП ... 43 3.3 Техніко-економічне обґрунтування заміни вимикачів на РТП та вибір обладнання ... 47 3.4 Розрахунок заземлення на РТП 35/10 кВ ... 52 3.5 Розрахунок блискавкозахисту на РТП ... 54 3.6 Висновки по третьому розділі ... 55 4 Охорона праці та безпека в надзвичайних ситуаціях ... 56 4.1 Аналіз небезпечних факторів та заходи безпеки при обслуговуванні силових трансформаторів ... 56 4.2 Обґрунтування заходів щодо запобігання надзвичайним ситуаціям при експлуатації силових трансформаторів ... 59 ЗАГАЛЬНІ ВИСНОВКИ ... 63 ПЕРЕЛІК ПОСИЛАНЬ ... 65
Сядро, Анастасія Сергіївна, та Anastasiia Serhiivna Siadro. "Дослідження можливості використання електроавтобусів у громадському транспорті міста (на прикладі м. Дубно)". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2021. http://elartu.tntu.edu.ua/handle/lib/36866.
Повний текст джерелаВ першому розділі розглянуто роль транспортної системи у функціонуванні міста. В другому розділі розглянуто стан та можливості розвитку громадського транспорту в м. Дубно та Дубенської територіальної громади. В третьому розділі запропоновано технічна інфраструктура, необхідна для роботи електричних міських автобусів. В четвертому розділі розглянуто дорожній рух і забезпечення його безпеки, вплив автомобільного транспорту на стан навколишнього середовища. Кваліфікаційна робота викладена на 74 сторінках. Робота складається з вступу, чотирьох розділів і висновків. Для написання кваліфікаційної роботи було використано 47 літературних джерела.
The first section considers the role of the transport system in the functioning of the city. The second section considers the state and opportunities for the development of public transport in Dubno and Dubno territorial community. The third section proposes the technical infrastructure required for the operation of electric city buses. The fourth section considers road traffic and its safety, the impact of road transport on the environment. Qualification work is presented on 74 pages. The work consists of an introduction, four chapters and conclusions. 47 literary sources were used to write the qualifying work.
Жук, Микола Іванович, та Mykola Ivanovych Zhuk. "Обстеження пасажиропотоків та раціоналізація маршрутних пасажирських перевезень (на прикладі м. Тернопіль)". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, 2021. http://elartu.tntu.edu.ua/handle/lib/36864.
Повний текст джерелаIn the first section the theoretical bases of optimization of transportation of passengers are considered. The second section determines the impact of the passenger capacity factor on the rationality of scheduled passenger traffic. The third section defines the effectiveness of the proposed solutions. The fourth section discusses dangerous and harmful production factors, safety issues in motor vehicle emergencies. Qualification work is set out on 85 pages. The work consists of an introduction, four chapters and conclusions. 27 literary sources were used to write the qualifying work.
ВСТУП 7 ТЕОРЕТИЧНІ ЗАСАДИ ВИВЧЕННЯ ПАСАЖИРОПОТОКІВ 9 1.1. Понятійний апарат про пасажирські потоки та маршрути 9 1.2. Головні особливості обслуговування населення 14 1.3. Методи обстеження пасажиропотоків 20 ВИЗНАЧЕННЯ ВПЛИВУ КОЕФІЦІЄНТА ПАСАЖИРОМІСТКОСТІ НА РАЦІОНАЛЬНІСТЬ МАРШРУТНИХ ПАСАЖИРСЬКИХ ПЕРЕВЕЗЕНЬ 30 2.1. Визначення і планування основних перспективних показників маршрутної мережі 30 2.2. Формування графіку зміни коефіцієнта завантаження за днями тижня маршруту 11 33 2.3. Визначення денної кількості пасажирів, що перевозяться 35 2.4. Побудова графіку зміни коефіцієнта завантаження за днями тижня маршруту 18 36 2.5. Визначення кількості пасажирів, що перевозяться, за день, виконаних пасажиро-кілометрів 38 2.6. Розрахунок потреби в рухомому складі 39 2.7 Визначення кількості автобусів на маршруті №11, інтервалу і частоти руху 43 2.8. Визначення кількості автобусів на маршруті №18, інтервалу і частоти руху 44 ЕФЕКТИВНІСТЬ ЗАПРОПОНОВАНИХ РІШЕНЬ 46 3.1. Методи ціноутворення 46 3.2. Стратегії ціноутворення 49 3.3. Аналіз основних тенденцій ціноутворення на автотранспорті 56 3.4. Розрахунок вартості проїзду в маршрутних таксі міста 57 ОХОРОНА ПРАЦІ ТА БЕЗПЕКА В НАДЗВИЧАЙНИХ СИТУАЦІЯХ 68 ВИСНОВКИ 82 ПЕРЕЛІК ВИКОРИСТАНОЇ ЛІТЕРАТУРИ 83
Цубера, Іван Миколайович, та Ivan Tsubera. "Система електропостачання багатоквартирного будинку". Bachelor's thesis, Тернопільський національний технічний університет імені Івана Пулюя, кафедра електричної інженерії,Тернопіль, Україна, 2021. http://elartu.tntu.edu.ua/handle/lib/35317.
Повний текст джерелаЦілями даної кваліфікаційної роботи бакалавра є визначення можливості електропостачання багатоквартирного житлового будинку. В процесі роботи розглянуті два варіанти електропостачання нового десятиповерхового житлового будинку з електроплитами. Проаналізована робота діючого релейного захисту відходящих ліній розподільного пункту. Проведений аналіз навантаження трансформаторних підстанцій, що живляться від розподільного пункту, і визначена можливість підключення додаткового навантаження до розподільного пункту. Розглянуто питання електрозбереження і можливість контролю і обліку електроенергії за допомогою засобів АСКОЕ. В результаті проведеної роботи, на підставі техніко-економічного розрахунку визначений оптимальний варіант електропостачання житлового будинку.
Aims of this qualifying work of bachelor are determinations of possibility of power supply of apartment dwelling house. In the process of work two variants of power supply of new housing are considered. Analysed work of operating relay defence lines of distributive point. The conducted analysis of loading of transformer substations that feed from a distributive point, and certain possibility of connecting of the additional loading, is to the distributive point. The question of electro-maintenance and checking and account of electric power feature are considered by means of facilities. As a result of the conducted work, on the basis of техніко-економічного calculation the optimal variant of power supply of dwelling-house is certain.
ЗМІСТ ВСТУП 6 1 АНАЛІТИЧНИЙ РОЗДІЛ 8 1.1 Структура електропостачання району 8 1.2 Характеристика міських споживачів і вимоги до надійності їх електропостачання 9 1.3 Заходи по зниженню втрат електричної енергії в міських електричних мережах 12 1.4 Висновки до розділу 1. Постановка завдань кваліфікаційної роботи 15 2 РОЗРАХУНКОВИЙ РОЗДІЛ 16 2.1 Аналіз результатів вимірювання навантаження трансформаторних підстанцій і визначення можливості підключення додаткового навантаження до шин 10 кВ РП-22 16 2.2 Розрахунок навантаження нового житлового будинку і вибір схеми його електропостачання 18 2.2.1 Активне навантаження житлового будинку 18 2.2.2 Повна потужність житлового будинку і лінії, що живить його 18 2.2.3 Розрахунок першого варіанту електропостачання будинку 19 2.2.4 Розрахунок другого варіанту електропостачання будинку 22 2.2.5 Вибір числа і потужності силових трансформаторів нової ТП 24 2.2.6 Вибір перерізу КЛ 0,4 кВ від нової ТП до житлового будинку 25 2.3 Розрахунки струмів трифазного короткого замикання 26 2.4 Перевірка високовольтних електричних апаратів, в РП-22 32 2.4.1 Перевірка вимикачів 33 2.4.2 Перевірка роз'єднувачів 37 2.4.3 Перевірка трансформаторів струму 382.4.4 Перевірка ошиновки 40 2.4.5 Перевірка ізоляторів 42 2.4.6 Перевірка кабелів на термічну стійкість 43 2.5 Перевірка високовольтних електричних апаратів, встановлених в ТП 43 2.6 Висновки до розділу 2 44 3 ПРОЕКТНО-КОНСТРУКТОРСЬКИЙ РОЗДІЛ 45 3.1 Релейний захист 45 3.2 Автоматизована система контролю, обліку і управління електроспоживанням 52 3.3 Висновки до розділу 3 55 4 БЕЗПЕКА ЖИТТЄДІЯЛЬНОСТІ ТА ОСНОВИ ОХОРОНИ ПРАЦІ 57 4.1 Основні причини ураження людини електричним струмом 57 4.2 Захисне заземлення та занулення 58 ЗАГАЛЬНІ ВИСНОВКИ 63 ПЕРЕЛІК ПОСИЛАНЬ 65
Книшук, Вадим Сергійович, та Vadym Knyshuk. "Розробка заходів підвищення надійності електричного обладнання в системі електроспоживання деревообробного підприємства". Master's thesis, ТНТУ імені Івана Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29565.
Повний текст джерелаAn analysis is conducted in diploma work, and development of measures of increase of reliability of electric equipment is carried out in the system of electro-consumption of woodworking enterprise. The calculation of the electric loading is conducted on a plant and on the basis of the obtained data cartogram of the electric loading and graphic arts of the electric loading is built. On results calculations the place of location of main step-down substation was chosen and an amount and power of power transformers are chosen. The chart of inside factory power supply was also chosen and power of workshop transformer substations and distributive points is expected. During implementation of diploma project there were the conducted calculations of reactive-power that is subject to indemnification, there was the conducted choice of switches, disconnectors, transformers of current, transformers of own necessities of substation, terminators of overstrains, facilities of relay defence
ВСТУП 7 1 АНАЛІТИЧНА ЧАСТИНА 11 1.1 Електропостачання промислових підприємств 11 1.2 Особливості розрахунків електропостачальних систем 12 1.3 Вимоги до електричних мереж. Надійність електропостачання 15 1.4 Шляхи підвищення надійності електропостачання 16 1.5 Чинники, що впливають на надійність електрообладнання і систем електропостачання 17 2 НАУКОВО-ДОСЛІДНА ЧАСТИНА 21 2.1 Аналіз чинників, які впливають на надійність роботи електрообладнання 21 2.2 Підвищення надійності електрообладнання промислових підприємств 23 2.2.1 Експлуатація електрообладнання 23 2.2.2 Ремонт електродвигуна 24 2.2.3 Пошук несправностей при експлуатації електрообладнання 25 2.3 Заходи щодо забезпечення надійності роботи електротехнічних пристроїв 26 3 ТЕХНОЛОГІЧНА ЧАСТИНА 31 3.1 Загальна характеристика деревопереробного підприємства 31 3.2 Розрахунок електричних навантажень підприємства 33 3.2.1 Визначення розрахункової потужності технологічного обладнання 34 3.2.2 Визначення розрахункової потужності обладнання котельною 45 3.2.3 Визначення розрахункової потужності освітлювального навантаження 47 3.2.4 Розрахунок сумарного навантаження на КТП 59 4 ПРОЕКТНО-КОНСТРУКТОРСЬКА ЧАСТИНА 51 4.1 Вибір числа і потужності трансформаторів на підстанції 51 4.2 Компенсація реактивної потужності 4.3 Компонування проектованої комплектної трансформаторної підстанції зовнішньої установки 53 4.4 Вибір схеми електропостачання і розрахунок мережі НН 56 4.4.1 Розрахунок перерізів провідників по нагріву і втраті напруги 56 4.4.2 Розрахунок струмів короткого замикання в мережі нижчої напруги і вибір комутаційної апаратури 58 4.5 Розрахунок заземлюючого пристрою 66 4.5.1 Вибір режиму нейтралі 66 4.5.2 Розрахунок заземлюючого пристрою 67 4.6 Розрахунок пристрою грозозахисту 70 4.7 Заходи по підвищенню надійності електропостачання споживачів деревопереробного підприємства 71 4.7.1 Вибір резервного джерела живлення 72 4.7.2 Заміна повітряної лінії електропередачі 10 кВ з використанням захищених проводів і залізобетонних опор 75 5 СПЕЦІАЛЬНА ЧАСТИНА 84 5.1 Автоматичний захист асинхронного двигуна від перевантаження і нагріву 84 5.1.1 Пристрої вбудованого температурного захисту 84 5.1.2 Пристрій ЗОУП-25 89 5.1.3 Універсальний блок захисту асинхронних електродвигунів УБЗ-301 90 6 ОБГРУНТУВАННЯ ЕКОНОМІЧНОЇ ЕФЕКТИВНОСТІ 94 6.1 Визначення капітальних вкладень 94 6.2 Визначення річних експлуатаційних витрат 95 6.3 Складання кошторису електроенергетичних витрат 97 6.4 Розрахунок поточних витрат на обслуговування електрообладнання 101 7 ОХОРОНА ПРАЦІ ТА БЕЗПЕКА В НАДЗВИЧАЙНИХ СИТУАЦІЯХ 104 7.1 Аналіз небезпечних і шкідливих виробничих чинників 104 7.2 Заходи по зниженню негативної дії небезпечних і шкідливих виробничих чинників 107 7.3 Підвищення стійкості функціонування організацій в надзвичайних ситуаціях 110 8 ЕКОЛОГІЯ 112 7.1 Аналіз небезпечних і шкідливих виробничих чинників 112 7.2 Заходи по зниженню негативної дії небезпечних і шкідливих виробничих чинників 113 ЗАГАЛЬНІ ВИСНОВКИ ДО ДИПЛОМНОЇ РОБОТИ 115 ПЕРЕЛІК ПОСИЛАНЬ 117
Хованський, Андрій Васильович, та Andrii Khovanskyi. "Розробка заходів зниження втрат електричної енергії в системі електропостачання підприємства обробки деревини". Master's thesis, ТНТУ імені Івана Пулюя, 2019. http://elartu.tntu.edu.ua/handle/lib/29760.
Повний текст джерелаThe primary purpose of work are an analysis and development of measures of decline of losses of electric energy in the system of power supply of enterprise of treatment of wood. In diploma work the calculation of the electric loading is conducted on a plant and on the basis of the obtained data картограму of the electric loading and graphic arts of the electric loading is built. On results calculations the place of location of ГПП was chosen and an amount and power of power transformers are chosen. The chart of inside factory power supply was also chosen and power of workshop transformer substations and distributive points is expected. During implementation of diploma project there were the conducted calculations of reactive-power that is subject to indemnification, there was the conducted choice of switches, disconnectors, transformers of current, transformers of own necessities of substation, facilities of relay defence.
ВСТУП 7 1 АНАЛІТИЧНА ЧАСТИНА 10 1.1 Втрати електричної енергії в системі електроспоживання 10 1.2 Цехові електричні мережі напругою до 1000 В 11 1.3 Схеми електричних мереж напругою до 1000 В 11 1.4 Конструктивне виконання цехових мереж та підстанцій 12 1.5 Облік електричної енергії 14 1.6 Коротка характеристика підприємства 17 2 НАУКОВО-ДОСЛІДНА ЧАСТИНА 19 2.1 Втрати електричної енергії в системі електроспоживання 19 2.2 Цехові електричні мережі напругою до 1000 В 22 3 ТЕХНОЛОГІЧНА ЧАСТИНА 29 3.1 Розрахунок електричних навантажень 29 3.1.1 Вибір напруги внутрішньозаводського електропостачання 29 3.1.2 Розрахунок освітлювального навантаження 29 3.1.3 Розрахунок силових навантажень 32 3.2 Картограма навантажень і визначення умовного центру електричних навантажень 35 3.3.1 Загальні відомості 35 3.3.2 Визначення центру електричних навантажень 38 3.3 Побудова графіків електричних навантажень 39 4 ПРОЕКТНО-КОНСТРУКТОРСЬКА ЧАСТИНА 44 4.1 Вибір числа і потужності трансформаторів ГПП 44 4.1.1 Основні положення 44 4.1.2 Вибір трансформаторів головної понижувальної підстанції 44 4.2 Вибір схеми внутрішнього електропостачання 48 4.3 Вибір числа і потужності цехових трансформаторів 48 4.3.1 Основні положення 48 4.3.2 Вибір цехових трансформаторів 50 4.4 Компенсація реактивної потужності 51 4.4.1 Вибір потужності конденсаторних батарей в мережі до 1 кВ 51 4.4.2 Вибір потужності конденсаторних батарей в мережі 10 кВ 52 4.5 Розрахунок струмів короткого замикання 53 4.6 Вибір основних елементів схеми електропостачання напругою вище 1 кВ 56 4.6.1 Вибір комутаційного обладнання 56 4.6.2 Вибір шин на головній понижувальній підстанції 59 4.6.4 Вибір трансформатора напруги 61 4.6.5 Вибір кабельних мереж 10 кВ 62 4.6.6 Вибір трансформатора власних потреб 65 4.7 Розрахунок цехової низьковольтної мережі 67 4.7.1 Розрахунок струмів короткого замикання в мережі напругою до 1000 В 67 4.7.2 Вибір обладнання в мережі напругою до 1000 В 71 4.7.3 Розрахунок занулення 73 4.8 Релейний захист і автоматика 74 4.8.1 Релейний захист трансформаторів головної понижувальної підстанції 74 4.8.2 Газовий захист 74 4.8.3 Поздовжній диференціальний струмовий захист 75 4.8.4 Струмова відсічка 78 4.8.5 Захист від багатофазних коротких замикань на стороні низької напруги 79 4.8.6 Резервний захист від міжфазних коротких замикань 80 4.8.7 Захист від перевантажень 81 4.8.8 Захист трансформаторів цехових підстанцій 82 4.8.9 Автоматика 83 5 СПЕЦІАЛЬНА ЧАСТИНА 84 5.1 Автоматичний захист асинхронного двигуна від перевантаження і нагріву 84 5.1.1 Пристрої вбудованого температурного захисту 84 5.1.2 Пристрій ЗОУП-25 87 5.1.3 Універсальний блок захисту асинхронних електродвигунів УБЗ-301 89 6 ОБГРУНТУВАННЯ ЕКОНОМІЧНОЇ ЕФЕКТИВНОСТІ 91 6.1 Визначення капітальних вкладень 91 6.2 Визначення річних експлуатаційних витрат 92 6.3 Складання кошторису електроенергетичних витрат 94 6.4 Розрахунок поточних витрат на обслуговування електроустаткування 99 7 ОХОРОНА ПРАЦІ ТА БЕЗПЕКА В НАДЗВИЧАЙНИХ СИТУАЦІЯХ 102 7.1 Аналіз небезпечних і шкідливих виробничих чинників 102 7.2 Заходи по зниженню негативної дії небезпечних і шкідливих виробничих чинників 105 7.3 Підвищення стійкості функціонування організацій в надзвичайних ситуаціях 108 8 ЕКОЛОГІЯ 110 8.1 Актуалність охорони навколишнього середовища 110 8.2 Заходи по зниженню шумового забруднення довкілля 111 ЗАГАЛЬНІ ВИСНОВКИ ДО ДИПЛОМНОЇ РОБОТИ 113 ПЕРЕЛІК ПОСИЛАНЬ 114
Чміль, Степан Станіславович, та Stepan Chmil. "Забезпечення надійності функціонування розподільчої мережі 110 кВ Теребовлянського РЕМ". Master's thesis, Тернопільський національний технічний університет імені Івана Пулюя, кафедра електричної інженерії,Тернопіль, Україна, 2020. http://elartu.tntu.edu.ua/handle/lib/33510.
Повний текст джерелаВ даній кваліфікаційній роботі магістра здійснено аналіз мережі Теребовлянського району ВАТ “Тернопільобленерго”. Розраховано навантаження підстанції для максимального та мінімального режимів. Запропоновано сім можливих варіантів розвитку електричної мережі Теребовлянського РЕМ. Проведено вибір марки проводу, потужності та кількості силових трансформаторів. Розглянуто різні варіанти схем електричних з’єднань для високої та низької сторони підстанції. Здійснено вибір комутуючої апаратури, вимірювальної апаратури, трансформаторів власних потреб. Запропоновано принципову схему підстанції .
In this qualification work of the master the analysis of the network of Terebovlya district of JSC "Ternopiloblenergo" is carried out. The substation load for maximum and minimum modes is calculated. Seven possible variants of development of the electric network of Terebovlya REM are offered. The choice of wire brand, power and number of power transformers was made. Different variants of electrical connection schemes for the high and low side of the substation are considered. The choice of switching equipment, measuring equipment, transformers of own needs is made. The schematic diagram of the substation is proposed.
ВСТУП...6 1. АНАЛІТИЧНИЙ РОЗДІЛ…8 1.1 Розподільчі мережі. Резервування…8 1.2 Надійність електропостачання споживачів. Категорійність. Вимоги до постачальних компаній…13 1.3 Висновки до розділу…17 2. РОЗРАХУНКОВО-ДОСЛІДНИЦЬКИЙ РОЗДІЛ…18 2.1 Характеристика електричної мережі 110 кВ Теребовлянського району електромереж ВАТ “Тернопільобленерго”…18 2.2 Обчислення навантаження на підстанції «Раковець»…27 2.3 Запропоновані варіанти розвитку електричної мережі Теребовлянського РЕМ …28 2.4 Вибір проводів повітряних ліній електропередач …36 2.5 Вибір силових трансформаторів ПС «Раковець»…36 2.6 Визначення параметрів елементів. Формування схеми заміщення електричної мережі 110 кВ Теребовлянського РЕМ …40 2.7 Висновки до розділу…45 3. ПРОЕКТНО-КОНСТРУКТОРСЬКИЙ РОЗДІЛ …46 3.1 Варіанти головної схеми електричних з'єднань …46 3.2 Розрахунок струмів короткого замикання …52 3.2.1 Розрахунок ударного струму…53 3.2.2 Розрахунок складових струму…53 3.2.3 Розрахунок теплового імпульсу струму…54 3.3 Вибір вимірювальної апаратури …55 3.3.1 Вибір трансформаторі струму …56 3.3.2 Вибір ТН…58 3.3.2.1. Вибір ТН на стороні 110 кВ…59 3.3.2.2. Вибір ТН на стороні 35 кВ…59 3.3.2.3. Вибір ТН на 10 кВ…60 3.4 Вибір вимикачів, роз’єднувачів …60 3.5 Вибір обмежувачів перенапруг для 110 кВ, 35 кВ та 10 кВ …62 3.6 Вибір ТВП…63 3.7 Вибір запобіжників …64 3.8 Побудова принципової схеми ПС «Раковець»…65 3.9 Висновки до розділу …68 4. ОХОРОНА ПРАЦІ ТА БЕЗПЕКА В НАДЗВИЧАЙНИХ СИТУАЦІЯХ…69 4.1 Причини електротравм та умови ураження людини електричним струмом …69 4.2 Система засобів та заходів з безпечної експлуатації електроустановок …70 4.3 Дія електромагнітного випромінювання на людину …72 ЗАГАЛЬНІ ВИСНОВКИ…74 ПЕРЕЛІК ПОСИЛАНЬ…75 ДОДАТКИ…1 Додаток А. Вибір потужності силових трансформаторів…2 Додаток Б. Порівняльний розрахунок трансформаторів…3
Bouquet, Eric. "Etude de cycles calcination/carbonatation lors de la capture de CO2 en lit fluidisé circulant." Thesis, Mulhouse, 2009. http://www.theses.fr/2009MULH2226.
Повний текст джерелаThe works led in this Thesis consisted in developing an experimental pilot proving CO2 capture feasibility by calcium chemical looping using Circulating Fluidised Bed as boilers. These were undertaken in two step: At the laboratory scale with theoretical interpretation of the experimental results and at the pilot scale in the aim to validate the process.The experimental results on the scale of the laboratory allowed to show that the sintering of CaO bring about the decreasing of the carbonation rate during calcination/carbonation cycles. The sintering velocity are accelerated by CO2 during the calcinations step. The analysis of the calcined samples showed a micrograins structure inside the initial carbonate grains The not sintered CaO micrograins are the location of the carbonation reaction.A process of CO2 capture by calcium chemical looping was designed and built. It was made by two circulating fluidized beds, a carbonator where the CO2 capture were performed and the calcinator allowing the lime regeneration. These two circulating fluidized beds are coupled allowing a continuous CO2 capture.In spite of the low capture efficiency obtained on the scale of this pilot (from 18 to 23 %), these results seem encouraging for the development of this technology, considering the fact that many limiting factors of the capture efficiency disappear with the change of scale
Atapauccar, Escalante Katherine, and Ruiz Bryan Hugo Ramirez. "Gestión de movilidad peatonal para la reducción de los tiempos de espera de los usuarios dentro de la estación Canadá del BRT Metropolitano de Lima." Bachelor's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2020. http://hdl.handle.net/10757/653326.
Повний текст джерелаThe Bus Rapid Transit (BRT) is a bus-based public transport system that increase the effectiveness of public transportation through dedicated lanes with busways and independent stations. However, the pedestrian routes disorder at the station, the high density and the interaction between pedestrians produce high waiting times since the entrance at the station until the board at the bus. The present research proposes a management of pedestrian mobility focused on modify the pedestrian routes and adapting the entrance and exit of the station. The main objective of the investigation is reducing the waiting times of users at the station. Users waiting times at the station were measured by visiting a BRT station located in the city of Lima. The collection of information makes it possible to establish the peak pedestrian traffic hours and demonstrate that users can spend more time at the station than on the bus. The improvement proposal was simulated in Vissim software in order to determine its reducing waiting times efficiency. The results show that users waiting times at the station were reduced by 25%. On the other hand, the pedestrian density and conflict points between pedestrians decreased by 44% and 73% respectively. Finally, increase in the pedestrian velocity of the corridors was obtained by 37%.
Tesis
Hegrová, Michaela. "Vliv etherů celulózy na reologické vlastnosti vápna." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371927.
Повний текст джерелаPascoal, Susana. "New aspects in coordination of vertebrate limb bud development." Doctoral thesis, 2006. http://hdl.handle.net/1822/6275.
Повний текст джерелаO desenvolvimento dos membros dos vertebrados envolve uma regulação temporal e espacial estrita, quer da proliferação, quer da diferenciação celulares. As células precursoras dos elementos esqueléticos que formam o membro são dispostas sequencialmente ao longo do eixo proximal-distal (P-D). Na asa da galinha, estes elementos esqueléticos são formados com o mesmo tamanho inicial, crescendo depois diferencialmente e dando origem a sete compartimentos esqueléticos. Existem dois modelos que tentam explicar a especificação dos destinos celulares ao longo do eixo PD do membro dos vertebrados. Embora essencialmente diferentes, ambos postulam a existência de uma zona distal no membro onde as células residem até chegar o tempo de diferenciarem – modelo da zona de progresso - , ou de expandirem – modelo da especificação precoce. Contudo, continua ainda por determinar a forma como estas células adquirem a noção de tempo. Em 1997, a identificação de um relógio molecular ligado ao processo da somitogénese proporcionou novos conhecimentos na forma de como é que as células adquirem a noção de tempo. Outra descoberta interessante realizada no processo da somitogénese foi a observação de uma “wavefront” de maturação. Quando esta “wavefront” de maturação é deslocada anteriormente através da introdução de esferas embebidas em proteína Fibroblast Growth Factor (FGF)8 na região mediana da mesoderme presomítica (MPS), formam-se sómitos mais pequenos. Os estudos realizados durante o curso desta tese de doutoramento, permitiramnos mostrar pela primeira vez a existência de um relógio molecular que actua durante o desenvolvimento do membro superior do embrião de galinha. Experiências realizadas nesse sentido permitiram-nos estudar o padrão de expressão dos componentes do relógio molecular da somitogénese, hairy1 e hairy2 durante o desenvolvimento do membro superior da galinha e observar que um dos componentes do relógio, o gene hairy2 apresenta ciclos de expressão com uma periodicidade de 6 horas nas células percursoras condrogénicas do membro. Foram realizados estudos para determinar o período de tempo necessário para a formação de um elemento esquelético do membro, e propomos que cada falange é formada em 12 horas, sugerindo que um elemento esquelético do membro é formado por células com “n” e “n+1” ciclos de expressão do gene hairy2. Em analogia com a “wavefront” descrita no modelo da somitogénese, sugerimos que um processo semelhante possa estar a ocorrer no mesênquima distal do membro dos vertebrados. Devido à expressão da proteína de FGF8 e do RNAm de fgf8 na Apical Ectodermal Ridge (AER) activar a expressão de MAPK phosphatase 3 (mkp3) no mesênquima distal do membro, fomos caracterizar o padrão de expressão deste gene e observámos que existe um gradiente de expressão de mkp3 no mesênquima distal do membro. Analisamos também o padrão de expressão obtido com uma sonda intrónica de mkp3, e sugerimos que mkp3 no mesênquima distal do membro actua de uma maneira semelhante à de fgf8 na MPS. De modo idêntico ao modelo proposto para a somitogénese, demonstramos também que quando a expressão de mkp3 sob a influência de FGF8 é estendida proximalmente, os elementos esqueléticos do membro que se estão a formar nessa altura são menores. Por último, demonstramos que a sinalização de FGF8 proveniente da AER regula positivamente a expressão de hairy2 no mesênquima distal do membro. O trabalho realizado nesta tese sugere a existência de um paralelismo entre o processo da somitogénese e do membro. Ambos apresentam uma zona onde as células são mantidas num estado indiferenciado (MPS e o mesênquima distal do membro) onde está presente o relógio molecular responsável por regular a periodicidade da formação das estruturas. Em ambos os casos, estas zonas são mantidas num estado indiferenciado pelas vias de sinalização FGF/ Wingless int (WNT) que controlam o tamanho dos elementos formados. Recentemente, a via do Mitogen Activated Protein Kinase/ Extracellular signal-Regulated Kinase (MAPK/ERK) também foi implicada neste processo. Outro paralelismo interessante entre estes dois sistemas é o facto do ácido retinóico (AR) e da via de sinalização FGF inibirem-se mutuamente dando origem a que um certo número de células se distribuam para a iniciação do programa de diferenciação condrogénico, resultando na regulação do tamanho dos elementos. Até ao presente momento, todos os estudos relativos à expressão cíclica de genes ao longo do desenvolvimento embrionário, têm-se focado exclusivamente na somitogénese. Porém, o controlo temporal é absolutamente necessário durante todo o desenvolvimento embrionário, podendo mesmo ser considerado uma quarta dimensão do desenvolvimento. Os estudos realizados nesta tese de doutoramento sugerem que o controlo temporal exercido pela expressão cíclica de genes pode ser um mecanismo geral para atribuição de informação temporal celular durante o desenvolvimento embrionário dos vertebrados, e não uma propriedade exclusiva das células da MPS como acreditado até agora.
Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BD/8657/2002; POCTI/BCI/42040/2001.
Fundo Social Europeu (FSE) - POCTI 2010.
Rede Europeia de Excelência, “Cells into Organs” - EU/FP6.
"Induced regeneration and gene expression in the chick limb bud." Tulane University, 1995.
Знайти повний текст джерелаacase@tulane.edu
"Supernumerary digit induction by mouse posterior limb bud cell lines." Tulane University, 1999.
Знайти повний текст джерелаacase@tulane.edu
"Characterization of posterior signaling mechanisms of cultured mouse limb bud cells." Tulane University, 1992.
Знайти повний текст джерелаacase@tulane.edu
Chen, Ting-Peng, and 陳庭鵬. "The effects of nerve growth factor on limb bud derived stromal cells." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/81103952251319253048.
Повний текст джерела國立陽明大學
口腔生物研究所
90
Organs have different functions in the body all comes from the same germ cell in the process of embryonic development. Morphorgenesis and differentiation of these organs involves sequential and complex interaction between ectoderm, mesoderm and endoderm. The interaction between epithelial and mesenchymal tissue is the most important mechanisms of the organ morphegensis, and the development of limb bud and tooth germ is one of example suit to this model. Nerve growth factors (NGF) are known for the main key of development, differentiation and survival for sensory and motor neurons derived from the neural crest and also involve in the morphogenetic process of many organs. In the past, the separated dental papilla of S.D. rat was cultured in DMEM-serum medium with 100ng/ml NGF for 7days. Some cells migrated from the separated dental papilla were found and the cell types changed to neural-like cells identified by immnuohistochemistry with neural specific markers, like peripherin, glial fibrillary acidic protein and neurofilament-M. The purpose of this study was to evaluate if NGF would impact the differentiation of cell from non-neurogenic to neurogenic fate on limb bud derived stomal cells, so limb bud of the day 12, day 14, and day16 from the embyo of S.D.rat were used in experimental model. The limb bud mesenchymal tissue were digested by enzyme, and the cells were cultured in different concentration medium of NGF (0ng/ml、50ng/ml、100ng/ml、200ng/ml) for 7 days. The results showed the limb bud mesenchymal stromal cells derived from non-neurogenic tissue would differetiate to neural-like cells in the stimulation of NGF and the relationship between NGF concentration and differentiation of cells' numbers have positive effect.
Pires, Diana Sofia Chapela Duarte 1987. "Role of Igr family members in AER renewal during limb bud development." Master's thesis, 2011. http://hdl.handle.net/10451/4688.
Повний текст джерелаDuring limb development, the proximal-distal outgrowth is controlled by a thickening of ectodermal cells at the distal tip of the limb, termed apical ectodermal ridge (AER). This transient embryonic structure is essential for the patterning and limb outgrowth, being a conserved feature in vertebrate development and it is also important to maintain proliferation in adjacent tissues before their differentiation. Despite AER induction and maintenance are orchestrated by complex interactions between the FGF, WNT/β-catenin and BMP signaling pathways, little is known about the molecules involved in the maintenance of the proliferation versus apoptosis and the renewal of its cells during development. In recent studies, it has been showed by our lab that one of these molecules, oct4, could be involved in the control of proliferative balance within the AER cells. In this thesis we present evidences of the involvement of two more molecules in this process, lgr5 and lgr6, which are known as adult stem cells markers. In here, we describe the expression pattern of lgr5 and lgr6 during limb bud development using the chicken embryo as a model and show that their expression patterns in the limb bud are consistent with the areas of cell proliferation within the AER. Moreover, we performed lgr5 gain-of-function experiments through in ovo electroporation and studied the relationship of lgr5 and lgr6 with different signaling pathways known to be involved in the AER induction and maintenance. The phenotypes obtained point to the involvement of lgr5 in the maintenance of a proliferative niche in the AER. We also present here, evidences showing that lgr6 is controlled by WNT signaling. Our results support a model in which lgr5 and lgr6 control the activation and maintenance of a niche of undifferentiated cells that are in continuous proliferation at the base of AER. This niche can be responsible for the renewal of AER until it disappears by massive programmed cell death.
Malko, Andrei. "Characterization of the mouse limb bud cell culture model to study the role of calreticulin in chondrogenesis." Thesis, 2007. http://link.library.utoronto.ca/eir/EIRdetail.cfm?Resources__ID=452830&T=F.
Повний текст джерелаBoutin, Eugenie L. "An analysis of the maintenance of the chick limb bud apical ectodermal ridge a possible role for insulin /." 1986. http://catalog.hathitrust.org/api/volumes/oclc/14094708.html.
Повний текст джерелаTypescript. Vita. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references (leaves 111-115).
Bo, Hung Chen, and 陳柏宏. "Circulating Fluidized Bed Boiler lime of Engineering Properties." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/26914423147931312040.
Повний текст джерела正修科技大學
營建工程研究所
100
In this study, the use of byproduct lime: a circulating fluidized bed power boiler (Circulating Fluidized Bed Boiler, hereinafter referred to as CFB) as a cement material mixed with material, its content is divided into two parts, the first to explore the fineness of CFB compressionthe intensity, and therefore research and analysis of different fineness CFB add compressive strength among the specimens in the age period; the other hand, while CFB, cement and granulated blast furnace slag as a soil conditioner ratioto explore the effectiveness of the application of the nature of the works of CFB, provides the industry's production (CFB) made reference of the various types of soil amendments. To further promote the byproduct lime into the resources available to be applied more widely. The results of the study, the CFB fly ash use in cement - granulated blast furnace slag system not grinding volume range of about 5% -10%, while the CFB fly ash exceeding 20%, the cause strength reduction due to material analysis from reduction. CFB fly ash cement mortar compressive strength after the use of grinding general than the grinding of specimens high strength, indicating the fineness of CFB, contribute to the hydration reaction byproduct lime mixed with blast furnace slag application soil conditioner, too much water will lead to a retarding effect by adjusting the ratio and to reduce the amount of mixing water, so that the setting time and strength CLSM requirements of standard. Water-cement ratio of 1.0 to 1.6, able to meet the requirements in 3 days and 7 days of age intensity. Therefore confirm the CFB is great can be applied to practical engineering resources of the by-products.reaction, therefore verifiable CFB is great can be applied to practical engineering resources of the by-products.
Meysing, Daniel. "Investigations of Biomass Pretreatment and Submerged Fixed-bed Fermentation." Thesis, 2011. http://hdl.handle.net/1969.1/ETD-TAMU-2011-12-10295.
Повний текст джерелаShih-ChangWong and 翁世昌. "Study on Using By-product Lime of Circulating Fluidized Bed as Backfill Materials." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/89742785596826087698.
Повний текст джерелаWen-WeiChang and 張文瑋. "Preliminary Study on Using By-product Lime of Circulating Fluidized Bed as Cementitious Materials." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/18404085166032404012.
Повний текст джерела國立成功大學
土木工程學系碩博士班
98
Under the rise in the conscious on environment protection, the problem of dumping the by-product lime from circulating fluidized bed (CFB) became a tricky issue. Moreover, problems on both environment pollution and energy conservation in cement industry have also attracted more concern than ever. Hence pursuit of the substitute material for cement, especially the material is a by-product or waste from the industry, has been an urgent need for environment protection. In this study, the by-product lime in CFB and slag are mixed with different ratios and an accelerator is used to activate the hydration speed of both the anhydrite and Pozzolan reactions of the mixture. Bsaed on series of tests and analyses of the test results, the cementitious material presents the features as follow:(1) By adding 3% of accelerator to activate the by-product lime in CFB, both the initial time and fianl setting times of the anhydrite can be shortened. (2) By mixing slag into the hydrated product of by-product lime in CFB, i.e Ca(OH)2 , the C-S-H colloid can be generated by the reaction of the Pozzlan. (3) The cementitious material is with a high porosity in between 38% to 50%. (4) By curing in the solution with 10% of water-glass, the cementitious material can be hardened both in air and in water, instead of without curing in the solution, the material can just be hardened in air only. (5) As adding the bottom ash into the binder, the cementitious material is with both better strength and more durability.
Костишин, Софія Івіанівна, та Sofiia Ivianivna Kostyshyn. "Проєкт технічного переоснащення цеху хлібзаводу в місті Тернопіль з метою розширення асортименту хлібобулочних виробів". Bachelor's thesis, 2021. http://elartu.tntu.edu.ua/handle/lib/35682.
Повний текст джерелаQualification work consists of an introduction, three sections, a list of used sources of 10 items. The total volume of the work is 79 pages, on which 37 tables are presented, 81 formulas are used. In the first section of the qualification work the substantiation of measures on technical re-equipment of the enterprise is carried out, the description of technological schemes of production is carried out, necessary technological calculations on a choice and definition of productivity of furnaces, phase and production compoundings, an output of products, technological parameters, expenses of raw materials and areas for its storage equipment for assembling bakery lines. The second section presents technical and economic calculations to determine the feasibility of technical re-equipment, payback period of these measures, the cost of products, etc. The third section contains measures on the basics of labor protection and safety.
Анотація... Зміст.... Вступ..... 1. ТЕХНОЛОГІЧНА ЧАСТИНА..... 1.1. Обгрунтування заходів з технічного переоснащення цеху хлібзаводу...... 1.2. Вибір, обґрунтування і опис технологічних схем....... 1.3. Характеристика сировини, основних і допоміжних матеріалів......... 1.4. Технологічні розрахунки.... 1.4.1. Вихідні дані...... 1.4.2. Вибір та розрахунок продуктивності печей....... 1.4.3. Розрахунок пофазних рецептур....... 1.4.4. Розрахунок виходу виробів......... 1.4.5. Розрахунок виробничих рецептур і вибір технологічних параметрів. 1.4.6. Розрахунок витрат сировини і площ для її зберігання...... 1.4.7. Розрахунок і вибір технологічного обладнання.... 1.5. Технохімічний контроль виробництва...... 2. ТЕХНІКО-ЕКОНОМІЧНІ РОЗРАХУНКИ..... 3. БЕЗПЕКА ЖИТТЄДІЯЛЬНОСТІ, ОСНОВИ ОХОРОНИ ПРАЦІ... Список використаних джерел....
Paul, Manan. "A three-dimensional numerical model to predict temperature and degree of calcination in the solids bed in lime kilns." 2004. http://link.library.utoronto.ca/eir/EIRdetail.cfm?Resources__ID=94896&T=F.
Повний текст джерелаЛевицький, Руслан Васильович, та Ruslan Levytskyi. "Розробка системи для написання та менеджменту автоматизованих ВDD тестів на базі Java та Cucumber". Master's thesis, 2020. http://elartu.tntu.edu.ua/handle/lib/33623.
Повний текст джерелаThe aim of the thesis is to develop an information system for writing and managing automated BDD tests, which helps team members working on a software development project to quickly and efficiently integrate BDD methodology into the box development process, and allows you to take full advantage of it. Methods and software used in performing system development: Java programming language, TestNG test framework, Selenium Web Driver, BDD Cucumber framework. The result is a developed software product for automated testing of basic elements of web pages using a behavioral testing method implemented using the Cucumber framework.