Дисертації з теми "Lignocellulose pretreatments"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Lignocellulose pretreatments".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Munns, Craig Christopher Robert. "Development of physio-chemical pretreatments and mixed microbial cultures for the conversion of lignocellulosic biomass to useful products." Thesis, University of Edinburgh, 2017. http://hdl.handle.net/1842/28768.
Повний текст джерелаBadalato, Nelly. "Structure de déchets lignocellulosiques : effets sur la colonisation, les communautés microbienne et les performances de méthanisation, caractérisés par des approches fonctionnelles et haut-débit." Electronic Thesis or Diss., Paris, AgroParisTech, 2014. http://www.theses.fr/2014AGPT0002.
Повний текст джерелаLignocellulosic materials have a high energy potential and are abundant, especially in municipal solid waste and their methanization is a promising waste-to-energy bioprocess. However, owing to their highly complex and heterogeneous structure, they are recalcitrant to anaerobic conditions and the use of pre-treatments is usually required to improve their biodegradation yields. Besides, lignocellulose colonization by cellulolytic microorganisms is a key step for an efficient biodegradation. In this context, the PhD work aimed to better understand the factors affecting waste colonization, to establish the link between lignocellulosic waste colonization and its biodegradation efficiency and to characterize more precisely the mechanisms and interactions within the biomass. A transversal approach was developed, combining cultures of model pure strains and lab-scale methanization microcosms with a complex biomass. Integrated approaches were applied to these studies, combining high-throughput analyses (metagenomics/(meta) proteomics), physico-chemical monitoring of bioconversion and finally physico-chemical characterization of substrates. The main results highlight the important role of lignocellulosic materials chemical and micro-and macro -structural features for their recalcitrance, their biodegradation efficiency and the response of the microbial compartment. The first global quantitative proteomic study on the cellulolytic model Clostridium cellulolyticum was conducted. Results showed an increased biodegradation rate of the facial tissue compared to cotton. This enhanced biodegradation was associated to a particular metabolic profile, a faster and more extensive colonization and finally a quantitative modulation of the cellulasic system. On the other hand, study of lignocellulosic waste methanization confirmed the good agreement between this more realistic system and the above-described model system. It also provided new information about the effects of substrate on microbial community structure. Noticeably, Bacteroidia members predominated in the presence of tissue and a high proportion of Spirochaetes members was observed in the presence of cotton. Finally, study of the effects of wheat straw and cardboard dry grinding revealed the limitations of these pretreatments on biodegradation efficiency. Main key points were a moderate positive effect of wheat straw fine grinding, and the sensitivity of the microbial communities to substrate surface characteristics, as evidenced by the emergence of different microbial communities according to the applied mechanical pretreatment. In conclusion, this work brings new perspectives to the study of lignocellulosic waste recalcitrance by addressing both the structural, functional and ecological aspects. These results contribute to the core fundamental knowledge on bioprocesses. They confirm that the lignocellulosic materials are specific among non-hazardous waste and require the implementation of adapted specific processes
Monlau, Florian. "Application of pretreatments to enhance biohydrogen and/or biomethane from lignocellulosic residues : linking performances to compositional and structural features." Thesis, Montpellier 2, 2012. http://www.theses.fr/2012MON20178/document.
Повний текст джерелаIn the future, various forms of renewable energy, such as second generation biofuels from lignocellulosic residues, will be required to replace fossil fuels. Among these, biohydrogen and methane produced through fermentative processes appear as interesting candidates. However, biohydrogen and/or methane production of lignocellulosic residues is often limited by the recalcitrant structure and a pretreatment step prior to fermentative processes is often required. Up to date, informations on lignocellulosic characteristics limiting both hydrogen and methane production are limited.Therefore, this work aims to investigate the effect of compositional and structural features of lignocellulosic residues on biohydrogen and methane performances for further developping appropriate pretreatments strategies. Firstly, a panel of twenty lignocellulosic residues was used to correlate both hydrogen and methane potentials with the compositional and structural characteristics. The results showed that hydrogen potential positively correlated with soluble carbohydrates only. Secondly, methane potential correlated negatively with lignin content and, in a lesser extent, with crystalline cellulose, but positively with the soluble carbohydrates, amorphous holocelluloses and protein contents. Pretreatments strategies were further developed to enhance both hydrogen and methane production of sunflower stalks. Dilute-acid and combined alkaline-enzymatic pretreatments, which were found efficient in solubilizing holocelluloses into soluble carbohydrates, were applied prior to biohydrogen potential tests. By combined alkaline-enzymatic pretreatment, hydrogen potential was fifteen times more than that of untreated samples. On the contrary, hydrogen production was inhibited after dilute-acid pretreatments due to the release of byproducts (furfural, 5-HMF and phenolic compounds) that led to microbial communities shift toward no hydrogen producing bacteria. Similarly, methane production, five thermo-chemical pretreatments (NaOH, H2O2, Ca(OH)2, HCl and FeCl3) found efficient in delignification or solubilization of holocelluloses, were considered. Among these pretreatments, the best conditions were 55°C with 4% NaOH for 24 h and led to an increase of 29-44 % in methane potential of sunflower stalks. This pretreatment condition was validated in one stage anaerobic mesophilic continuous digester for methane production and was found efficient to enhance from 26.5% the total energy produced compared to one stage-CH4 alone. Two-stage H2 (batch) / CH4 (continuous) process was also investigated. Nevertheless, in term of energy produced, no significant differences were observed between one-stage CH4 and two-stage H2 /CH4
Cheng, Wei. "Pretreatment and enzymatic hydrolysis of lignocellulosic materials." Morgantown, W. Va. : [West Virginia University Libraries], 2001. http://etd.wvu.edu/templates/showETD.cfm?recnum=1951.
Повний текст джерелаTitle from document title page. Document formatted into pages; contains xii, 173 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 138-142).
Warsame, Mohamed. "Saccharification of lignocellulose." Thesis, Malmö högskola, Fakulteten för hälsa och samhälle (HS), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-25910.
Повний текст джерелаThe increasing energy demand and the anticipated decline in crude oil production has led to an immense search for new energy sources. Plant cell walls contain lignocellulose that conserve great amounts of energy. These polysaccharides are of high importance for the search of renewable energy sources. Pretreatment of the cell wall is necessary in order to hydrolyse it to its component sugars. Once degraded to monomeric sugars it can be fermented to either ethanol or biogas through established fermentation technologies.The aim of this thesis was to compare and evaluate some of the methods used for sacchrification of lignocellulose. Three treatments where compared to determine which is highest yielding. These are enzymatic hydrolysis, microwave irradiation and steam explosion.Wheat straw was used as substrate and hydrolysed by three commercial enzyme mixtures. Samples were pretreated before the enzymatic reaction with either microwave or steam explosion. Results showed that a treatment of either microwave irradiation or steam explosion combined with enzyme hydrolysis gives the highest yield in monomeric sugars. The conclusions that can be drawn are that mechanical pretreatment increases yield drastically but is insufficient in its self. Further enzymatic treatment of wheat straw is necessary to obtain high amounts of simple sugars.
Brandt, Agnieszka. "Ionic liquid pretreatment of lignocellulosic biomass." Thesis, Imperial College London, 2012. http://hdl.handle.net/10044/1/9166.
Повний текст джерелаCorredor, Deisy Y. "Pretreatment and enzymatic hydrolysis of lignocellulosic biomass." Diss., Manhattan, Kan. : Kansas State University, 2008. http://hdl.handle.net/2097/693.
Повний текст джерелаKvillborn, Carin. "Enzymatic Pretreatment of Lignocellulose Rich Waste for Improved Biogas Production." Thesis, Linköpings universitet, Tema vatten i natur och samhälle, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-104974.
Повний текст джерелаStudien avsåg att undersöka metanutbytet från anaerob nedbrytning med förbehandlad lignocellulosa som substrat. Lignocellulosamaterialet, i form av skogsavfall, maldes och förbehandlades därefter med det organiska lösningsmedlet NMMO (N-metylmorfolin-N-oxid) och/eller de lignolytiska enzymerna laccase och versatile peroxidas med dosen 60 U g-1 torrsubstanshalt (TS). Mängden producerad metan undersöktes i en biometanpotentialanalys med inocula från en termofil biogasreaktor, som behandlade hushållsavfall. Triplikat av varje prov användes för att öka den statistiska stabiliteten. På grund av det stora antalet prover genomfördes studien i två omgångar: Serie 10 & 20 samt serie 30 & 40. Resultaten visade att det NMMO-behandlade skogsavfallet gav 130 NmL CH4 g-1 organisk substans (VS) och det obehandlade skogsavfallet gav 95 NmL CH4 g-1 VS i serie 10 & 20. Både obehandlat och NMMO- behandlat skogsavfall gav 140 NmL CH4 g-1 VS i serie 30 & 40. Förbehandling med NMMO verkar vara fördelaktig medan enzymbehandling endast resulterade i en smärre ökning av gasproduktionen. En analys av vätskan efter enzymbehandlingen visade förekomst av fenoler, vilket visar på en lyckad ligninnedbrytning.
Narayana, Swamy Naveen. "Supercritical Carbon Dioxide Pretreatment of Various Lignocellulosic Biomasses." Ohio University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1269524607.
Повний текст джерелаMoxley, Geoffrey W. "Studies of Cellulosic Ethanol Production from Lignocellulose." Thesis, Virginia Tech, 2007. http://hdl.handle.net/10919/43372.
Повний текст джерелаLignocellulose materials are structurally composed of five types of polymeric sugars, glucan, galactan, mannan, arabinan, and xylan. NREL has developed a quantitative saccharification (QS) method for determining carbohydrate composition. We proposed a new protocol based on the NREL 2006 Laboratory Analytical Procedure â Determination of Structural Carbohydrates and Lignin in Biomassâ (Sluiter et al. 2006a) with a slight modification, in which xylose concentration was determined after the secondary hydrolysis by using 1% sulfuric acid rather than 4% sulfuric acid. We found that the current NREL protocol led to a statistically significant overestimation of acid-labile xylan content ranging from 4 to 8 percent.
Lignocellulosic biomass is naturally recalcitrant to enzymatic hydrolysis, and must be pretreated before it can be effectively used for bioethanol production. One such pretreatment is a fractionation process that separates lignin and hemicellulose from the cellulose and converts crystalline cellulose microfibrils to amorphous cellulose. Here we evaluated the feasibility of lignocellulose fractionation applicable to the hurds of industrial hemp. Hurds are the remaining material of the stalk after all leaves, seeds, and fiber have been stripped from the plant. After optimizing acid concentration, reaction time and temperature, the pretreated cellulosic samples were hydrolyzed to more than 96% after 24 hours of hydrolysis (enzyme loading conditions of 15 FPU/g glucan Spezyme CP and 60 IU/g glucan Novozyme 188) at the optimal pretreatment condition (> 84% H3PO4, > 50 °C and > 1 hour). The overall glucose and xylose yields were 89% (94% pretreatment; 96% digestibility) and 61%, respectively. All data suggest the technical feasibility of building a biorefinery based on the hurds of industrial hemp as a feedstock and a new lignocellulose fractionation technology for producing cellulosic ethanol. The choice of feedstock and processing technology gives high sugar yields, low processing costs, low cost feedstock, and low capital investment.
Master of Science
Sierra, Ramirez Rocio. "Long-term lime pretreatment of poplar wood." Texas A&M University, 2005. http://hdl.handle.net/1969.1/3316.
Повний текст джерелаSchneider, L. (Laura). "Mechanocatalytic pretreatment of lignocellulosic barley straw to reducing sugars." Doctoral thesis, Oulun yliopisto, 2017. http://urn.fi/urn:isbn:9789526216478.
Повний текст джерелаTiivistelmä Biomassan konvertointimenetelmät mahdollistavat biotalouden hengen mukaisesti uusia ratkaisuja kemikaalien ja materiaalien kestävään tuotantoon sekä biomassan energiakäyttöön eri muodoissa (kuten pelletit, biopolttoaineet ja biokaasu). Lignoselluloosapohjaista, uusiutuvaa biomassaa, kuten tässä työssä tutkittua ohran olkea, on runsaasti saatavilla. Lignoselluloosa onkin yksi lupaavimmista raaka-aineista korvaamaan fossiilisia polttoaineita ja vähentämään kasvihuonekaasupäästöjä. Väitöskirjatutkimus antaa uutta tietoa ohran oljen mekaanis–katalyyttisestä käsittelystä, mikä on suhteellisen uusi menetelmä biomassan katalyyttisessä muokkauksessa. Menetelmässä yhdistetään kemiallinen katalyysi ja mekaaninen muokkaus (jauhatus) kuulamyllyllä. Lignoselluloosa (ohran olki) impregnoitiin tai sekoitettiin tutkitun katalyytin (muurahaishappo, etikkahappo, rikkihappo, oksaalihappodihydraatti, kaliumpyrosulfaatti) kanssa ja käsiteltiin erilaisissa mekaanis–katalyyttisissä olosuhteissa. Lignoselluloosan selektiivinen depolymerointi muodosti vesiliukoisia oligosakkarideja ja edelleen hydrolyysin kautta pelkistyneitä sokereita (pääasiassa ksyloosia, galaktoosia, arabinoosia ja glukoosia), joita voidaan käyttää biopolttoaineiden ja -kemikaalien valmistuksessa. Tutkimuksen tulosten perusteella rikkihappokatalyytillä saatiin 53,4 massa-% ohran oljen sisältämistä pelkistyneistä sokereista vapautettua lyhyillä käsittelyajoilla. Lisäksi sivutuotteiden muodostuminen oli vähäistä. Vastaavasti oksaalihappodihydraatti (sokerisaanto 42,4 massa-%) ja kaliumpyrosulfaatti (sokerisaanto 39,7 massa-%) toimivat uusina katalyytteinä hyvin, mutta vaativat rikkihappokatalyyttiä pidemmät jauhatusajat. Sen sijaan muurahaishapolla ja etikkahapolla sokerisaanto oli erittäin alhainen (alle 10 massa-%) mekaanis–katalyyttisessä käsittelyssä. Tutkimuksessa todettiin, että voimakas jauhatus vaikutti selkeästi reaktiolämpötilan nousuun käsittelyn aikana, mikä edisti korkeampaa sokerisaantoa. Vastaavasti sokerisaantoa voitiin parantaa katalyyttimäärällä ja happamuudella. Tulokset osoittavat, että näiden muuttujien tasapaino on ratkaisevaa ohran oljen tehokkaan katalyyttisen muuntamisen kannalta
Kitsos, Haralambos Minas. "Swelling pretreatment of lignocellulosic materials to promote enzymatic hydrolysis." Thesis, Georgia Institute of Technology, 1986. http://hdl.handle.net/1853/11780.
Повний текст джерелаSiddaramu, Thara Gejjalagere. "EVALUATION OF DIFFERENT PRETREATMENT APPROACHES FOR DISRUPTING LIGNOCELLULOSIC STRUCTURES." OpenSIUC, 2011. https://opensiuc.lib.siu.edu/theses/703.
Повний текст джерелаMancini, Gabriele. "Different approaches to enhance the biogas production from the anaerobic digestion of lignocellulosic materials." Thesis, Paris Est, 2017. http://www.theses.fr/2017PESC1250/document.
Повний текст джерелаBiogas production via anaerobic digestion (AD) is a long-standing renewable technology and a continuously growing bioprocess worldwide. Lignocellulosic materials (LMs) present several features that make them especially attractive among the organic substrates commonly employed in anaerobic bioreactors. In particular, LMs under the form of agricultural residues have been acknowledged as the most suitable feedstock for biomethane production due to their high availability, low cost, sustainability and no direct competition with food and feed production. However, their recalcitrance to biological conversion hinders their application for full-scale production of biogas and requires a pretreatment step to improve the LM microbial degradability. In addition to the challenges posed by the lignocellulosic structure, the supply of trace elements (TEs) has often been found insufficient within biogas digesters. The microbial growth depends on the availability and optimal amount of several specific TEs, which are essential constituents of cofactors in enzyme systems involved in the biochemistry of methane formation. Different chemical pretreatments, namely the solvent N-methylmorpholine-N-oxide (NMMO), the organosolv process, and an alkaline pretreatment using NaOH, were investigated during several batch experiments to enhance the biogas production yields from different LMs (i.e. rice straw, hazelnut skin, cocoa bean shell and wheat straw). Changes in the cellulose crystallinity, water retention value and chemical composition were assessed to better evaluate the effect of the different pretreatments studied on the lignocellulosic structure. Furthermore, the addition of different doses of Fe, Co, Ni and Se on the AD of rice straw was studied, evaluating the influence of the inoculum origin, as well as the performance and synergistic effect of combining an alkaline pretreatment with the addition of trace elements prior to the AD of rice straw. The bioavailability of TEs during batch biomethane potential tests was also evaluated applying a sequential extraction technique. The three pretreatments investigated were effective methods for enhancing the biomethane production from the employed LMs. The biomethane yield from the AD of rice straw increased by 82 and 41% after the NMMO and organosolv pretreatment, respectively. When compared within the same experiment, the NMMO, organosolv and NaOH pretreatment were able to improve the AD of wheat straw, differently affecting the chemical composition of the raw LM. The cumulative biomethane production yield of 274 mL CH4/g VS obtained with the untreated wheat straw was enhanced by 11% by the NMMO pretreatment and by 15% by both the organosolv and alkaline pretreatment. Hazelnut skin and cocoa bean shell, which were never investigated before as AD substrates, showed a good potential for biogas production, with cumulative biomethane yields of 223-261 and 199-231 mL CH4/g VS, respectively, for the untreated feedstocks. However, both NMMO and organosolv pretreatments did not lead to a significant enhancement of the biomethane production yields from these two LMs. The TE supplementation had only a minor effect compared to the pretreatment methods. The addition of Fe, Co, Ni and Se did not result in a significant improvement of the AD of rice straw, whereas the use of the NaOH pretreatment, during the same batch experiment, caused a considerable enhancement of the AD, increasing the biogas production yield by 21%. The negligible effect observed after TE supplementation on the AD of rice straw could be linked to its complex lignocellulosic structure, which requires an enhancement of the hydrolysis, which, rather than the methanogenesis, is the rate-limiting step
Du, Bowen Chambliss C. Kevin. "Effect of varying feedstock-pretreatment chemistry combinations on the production of potentially inhibitory degradation products in biomass hydrolysates." Waco, Tex. : Baylor University, 2009. http://hdl.handle.net/2104/5319.
Повний текст джерелаRicciotti, Federica. "Plasma based pretreatments of lignocellulosic biomass for Biogas and Bioethanol production." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.
Знайти повний текст джерелаMoharreri, Ehsan. "Optimization, Scale Up and Modeling CO2-Water Pretreatment of Guayule Biomass." University of Akron / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=akron1313013654.
Повний текст джерелаRuffell, John. "Pretreatment and hydrolysis of recovered fibre for ethanol production." Thesis, University of British Columbia, 2008. http://hdl.handle.net/2429/1369.
Повний текст джерелаTeghammar, Anna. "Biogas Production from Lignocelluloses : Pretreatment, Substrate Characterization, Co-digestion and Economic Evaluation." Doctoral thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-3654.
Повний текст джерелаAkademisk avhandling som för avläggande av teknologie doktorsexamen vid Chalmers tekniska högskola försvaras vid offentlig disputation den 24 maj 2013, klockan 10.00 i KA,Kemigården 4, Göteborg
Avery, Greg M. "A Life Cycle Assessment of Ionic Liquid Pretreatment for Lignocellulosic Biomass." University of Toledo / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1481273168926691.
Повний текст джерелаPeriyasamy, Karthik. "Production de bioéthanol à partir de biomasse lignocellulosique en utilisant des enzymes cellulolytiques immobilisées." Thesis, Université Grenoble Alpes (ComUE), 2018. http://www.theses.fr/2018GREAI024/document.
Повний текст джерелаThe overall objective of the study was to produce bioethanol from lignocellulosic biomass by using free and immobilized xylanase, cellulase and β-1, 3-glucanase. Specifically, this study was focused on the isolation of Trichoderma citrinoviride strain AUKAR04 and it produces xylanase (55,000 IU/gds), Cellulase (385 IU/gds) and β-1, 3-glucanase (695 IU/gds) in solid state fermentation. Then the free enzymes were biochemically characterized such as effect of pH, temperature and metal ion concentration and kinetics parameters. Then the enzymes were subjected to two types of immobilization using carrier-free co-immobilization (combi-CLEAs) method and immobilized on bifunctionalized magnetic nanoparticles (ISN-CLEAs) with higher thermal stability, extended reusability and good storage stability. Liquid ammonia pretreatment removed 40% lignin from the biomass and retained 95% of glucan, 65% of xylan and 41% of arabinan in sugarcane bagasse (SCB). SCB was enzymatically hydrolyzed and converted to 87% glucose from cellulose and 74% of xylose, 64% of arabinose from the hemicelluloses which is remarkably higher than the activity of the free enzymes. Chemical and structural analysis of SCB was done by ATR-FTIR, TGA and XRD. FTIR result showed a successful pretreatment of the SCB raw material. It showed that hemicelluloses and cellulose are partially depolymerized by the action of xylanase, cellulase and β-1,3-glucanase in ISN-CLEAs. TGA studies showed that the thermal stability of the ammonia pretreated and enzymatically treated samples have improved remarkably. XRD results showed that the crystallinity index of the ISN-CLEAs treated SCB increased to 61.3±1% when compared to the ammonia-treated SCB. Mono-culture fermentation using Saccharomyces cerevisiae LGP2Y1 utilized SCB hydrolysate containing 103.8 g/L of glucose and produced 42 g/L ethanol in 36 h of fermentation. The overall metabolic yield achieved was about 79% of theoretical yield. Co-culture fermentation using Saccharomyces cerevisiae LGP2Y1 and Candida utilis ATCC 22023 utilized SCB hydrolysate containing 107.6 g/L of glucose and 41.5 g/L xylose and produced 65 g/L ethanol in 42 h of fermentation. The overall metabolic yield in co-culture fermentation achieved was about 88 % of the theoretical yield
Auer, Lucas. "Vers la maîtrise des communautés microbiennes lignocellulolytiques : impact de la source d'inoculum et du prétraitement du substrat sur le fonctionnement des communautés." Thesis, Toulouse, INSA, 2016. http://www.theses.fr/2016ISAT0050/document.
Повний текст джерелаLignocellulose is the main component of vegetal cell wall and is thus the most abundant biopolymer on Earth. Its conversion into industrially relevant molecules is of concern to reduce fossil resources consumption. In the dedicated carboxylates platform, lignocellulose conversion relies on the metabolic potential of microbial consortia, but lignocellulose transformation rates can still be improved, despite substrate pretreatment approaches. In order to improve these rates, we here tested the transformation capacities of microbial communities originated from cow rumen and termite guts. 16S sequencing was used to characterize the effects of inoculum source and substrate pretreatment on the selected communities’ functioning. It allowed the comparison between obtained communities, but also between their dynamics during lignocellulose transformation. Culture conditions appeared to have a strong effect on the selected communities, which presented high similarities despite differences between initial inocula. Finally, communities associated to lignocellulose degradation showed marked dynamics, with a strong decrease in diversity indexes and the dominance of a few bacterial populations during the degradation maximum
Loku, Umagiliyage Arosha. "PRETREATMENT OF SWEET SORGHUM BAGASSE TO IMPROVE ENZYMATIC HYDROLYSIS FOR BIOFUEL PRODUCTION." OpenSIUC, 2013. https://opensiuc.lib.siu.edu/theses/1259.
Повний текст джерелаOrejuela, Lourdes Magdalena. "Lignocellulose deconstruction using glyceline and a chelator-mediated Fenton system." Diss., Virginia Tech, 2017. http://hdl.handle.net/10919/81255.
Повний текст джерелаPh. D.
Wood is a valuable material that can be used to produce liquid biofuels. Wood main components are biopolymers cellulose, hemicellulose and lignin that form a complex structure. Nature has locked up cellulose in a protective assembly that needs to be destroyed to gain access to cellulose, convert it to glucose and then ferment it to bioalcohol. This process is principally associated with limited enzyme accessibility. Therefore, biomass pretreatments that deconstruct native cell wall structure and allow enzyme access are required for effective biomass conversion techniques. This research studied two novel pretreatment methods on two wood species: 1) a deep eutectic solvent called glyceline that, under heat, swells wood and partially solubilizes cell wall materials by causing breakage of bonds and converting it into smaller molecules (monomers and oligomers), and 2) a chelator-mediated Fenton system (CMF) that chemically modifies the structure of the cell wall. Pretreatments were tested individually and in sequence in sweetgum and southern yellow pine. After pretreatments, utilizing analytical techniques, fractions were investigated for chemical and structural changes in the solubilized and residual materials. Treated wood samples were exposed to enzymatic conversion. A maximum 78% of glucose yield was obtained for the glyceline followed by CMF pretreated wood. For yellow pine only a 24% of glucose yield was obtained for the CMF followed by glyceline treatment. All these pretreatments presented different degrees of biopolymer removal from the cell wall and subsequent enzyme conversion levels. Overall, these studies revealed insight into two novel methods to enhance wood conversion adding to the methodology to deconstruct cell walls for fermentable sugars.
Kim, Tae Hyun Lee Yoon Y. "Bioconversion of lignocellulosic material into ethanol pretreatment, enzymatic hydrolysis, and ethanol fermentation /." Auburn, Ala., 2004. http://repo.lib.auburn.edu/EtdRoot/2004/FALL/Chemical_Engineering/Dissertation/KIM_TAE_24.pdf.
Повний текст джерелаYan, Lishi. "Kinetic characterization of hot water and dilute acid pretreatment of lignocellulosic biomass." Thesis, Washington State University, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=3628899.
Повний текст джерелаAcidic aqueous-phase pretreatment is a promising approach that has been directed at maximizing intermediates yields (e.g. sugars, sugar degradation products, and lignin) from biomass for fuel and chemical production. This dissertation explores the kinetic fundamentals of biomass hydrolysis in acidic aqueous-phase with different catalysts (e.g. sulfuric acid, metal chlorides), operating conditions (e.g. temperature, time pressure), and equipment configurations (e.g. batch, flowthough).
The kinetic analysis revealed that crystalline cellulose is insusceptible to hydrolysis compared with agarose at low temperature (e.g.140 °C), while it decomposed rapidly at elevated temperature (e.g. 220 °C). Higher temperature with reduced time was desirable for glucose production whereas lower temperature with prolonged time was preferred for xylose generation. In acidic conditions, furfural and levulinic acid were stable whereas 5-hydroxymethylfurfural was susceptible to decomposition with high rate constant. MgCl2 can promote the cleavage of C-O-C bond in polysaccharides (e.g. agarose) and enhance the subsequent dehydration reaction to 5-hydroxymethylfurfural. Unlike transition metal chlorides and H2SO4, MgCl2 has little ability to induce retro aldol and rehydration reactions to generate byproducts like lactic acid and levulinic acid. Mg2+ possessing hgiher activity than other alkali and alkaline earth metal chlorides (Na+ and Ca2+) resulted in 40.7% yield and 49.1% selectivity of 5-hydroxymethylfurfural.
Dissolution of biomass was significantly enhance using acidic hot water flowthrough pretreatment at 200—280°C. Significant cellulose removal accompanied with the transformation of cellulose I to cellulose II and amorphous cellulose were observed when temperature was above 240 °C for water-only and 220 °C for dilute acid. Approximately100% of the xylan and ∼90% of the cellulose were solubilized and recovered. Up to 15% of the lignin was solubilized, while the remaining lignin was insoluble. Over 90% sugar yields were obtained from pretreated whole slurries using less than 10 FPU/g cellulase plus hemicellulase enzyme.
A kinetic model was developed to depict the biomass degradation in flowthrough system. This model predicted the sugar generation more precisely than the conventional homogeneous first-order reaction models. Mass transfer limitations were minimized using 4mm biomass particle sizes with 4g biomass loading at 25mL/min flow rate, produced hydrolyzate slurries with 13g/L potential sugar concentrations.
Sathitsuksanoh, Noppadon. "Lignocellulose Saccharification via Cellulose Solvent Based Fractionation Followed by Enzymatic Hydrolysis: the Last Obstacle to Integrated Biorefineries." Diss., Virginia Tech, 2011. http://hdl.handle.net/10919/77259.
Повний текст джерелаPh. D.
Hassanpour, Morteza. "Biorefining of sugarcane bagasse based on acid-catalysed glycerol pretreatment." Thesis, Queensland University of Technology, 2021. https://eprints.qut.edu.au/207573/1/Morteza_Hassanpour_Thesis.pdf.
Повний текст джерелаAghazadeh, Mahdieh. "The Effect of Different Lignocellulosic Biomass and Different Pretreatment Methods on Cellulase Activity." Fogler Library, University of Maine, 2011. http://www.library.umaine.edu/theses/pdf/AghazadehM2011.pdf.
Повний текст джерелаWang, Yumei [Verfasser], Antje [Akademischer Betreuer] Spieß, and Jochen [Akademischer Betreuer] Büchs. "Interaction of Solvents and Mechanical Pretreatment with Enzymatic Lignocellulose Hydrolysis / Yumei Wang ; Antje Spieß, Jochen Büchs." Aachen : Universitätsbibliothek der RWTH Aachen, 2017. http://d-nb.info/1162498846/34.
Повний текст джерелаTan, Xin. "Effect of Organosolv Lignin and Extractable Lignin on Enzymatic Hydrolysis of Lignocelluloses." University of Cincinnati / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1613752000022518.
Повний текст джерелаWiermans, Lotte [Verfasser], Walter [Akademischer Betreuer] Leitner, and Martina [Akademischer Betreuer] Pohl. "Oxidative pretreatment and biocatalytic valorization of lignocellulosic biomass / Lotte Wiermans ; Walter Leitner, Martina Pohl." Aachen : Universitätsbibliothek der RWTH Aachen, 2016. http://d-nb.info/112733705X/34.
Повний текст джерелаCarey, Bobby D. Jr. "FIELD IMPLEMENTATION OF PHANEROCHAETE CHRYSOSPORIUM BIOMASS PRETREATMENT: FUNGAL IDENTIFICATION AND INOCULATION TECHNIQUES." UKnowledge, 2014. http://uknowledge.uky.edu/bae_etds/25.
Повний текст джерелаAslanzadeh, Solmaz. "Pretreatment of cellulosic waste and high rate biogas production." Doctoral thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-3684.
Повний текст джерелаSimon, William E. "INVESTIGATION OF PHANEROCHAETE CHRYSOSPORIUM AND CLOSTRIDIUM THERMOCELLUM FOR IMPROVED SACCHARIFICATION OF LIGNOCELLULOSE UNDER NONSTERILE CONDITIONS." UKnowledge, 2015. http://uknowledge.uky.edu/bae_etds/35.
Повний текст джерелаDong, Y. (Yue). "Bifunctionalised pretreatment of lignocellulosic biomass into reducing sugars:use of ionic liquids and acid-catalysed mechanical approach." Doctoral thesis, Oulun yliopisto, 2017. http://urn.fi/urn:isbn:9789526216775.
Повний текст джерелаTiivistelmä Lignosellulossapohjainen biomassa on runsaimmin saatavilla oleva ja yksi lupaavimmista raaka-aineista biopolttoaineiden valmistukseen korvaamaan fossiilisia polttoaineita. Väitöskirjassa tutkitaan teollisuuden lignoselluloosapohjaisten sivutuotteiden, selluteollisuuden kuitulietteen ja sahateollisuuden sahanpurun (mäntypuru), muuntamista sokereiksi kahdella erilaisella ns. bifunktionaalisella esikäsittelyllä, joissa yhdistyvät lignoselluloosabiomassan perinteinen esikäsittely (hajotus) ja polysakkaridien sokeroituminen. Muodostuneet sokerit voidaan edelleen muuntaa biopolttoaineiksi ja -kemikaaleiksi. Tutkimuksen ensimmäisessä vaiheessa sahanpuru ja kuituliete muunnettiin sokereiksi happokatalysoidussa mekaanisessa käsittelyssä, joka tehtiin kuulamyllyssä. Reaktiossa katalyyttisen käsittelyn tehokkuuteen vaikuttivat erityisesti jauhatuksen kineettinen energia, jauhatusaika, happokonsentraatio ja reaktioseoksen kosteus. Tulosten perusteella todettiin, että ilman lähtöaineen esikäsittelyä sekä sahanpurun että kuitulietteen sokerisaanto oli noin 30 massa% lyhyen, matalassa happokonsentraatiossa tehdyn jauhatuksen jälkeen. Tutkimuksen toisessa vaiheessa kuituliete muutettiin sokereiksi käyttämällä ionista liuotinta (IL), hydroksialkyyli-imidatsoliumvetysulfaattia. Sokerisaanto kuitulietteestä oli noin 29 massa% IL-vesiseoksessa. Vesi toimi reaktiossa apuliuottimena ja sen rooli on keskeinen ionisten liuottimien käytössä. Sekoittunut vesi laski ionisen liuottimen viskositeettia sekä edisti aineensiirtoa liuottimen ja liukenevan aineen välillä. IL:n anionit lisäsivät happamuutta vesiliuoksessa ja mahdollistivat happamat olosuhteet samanaikaiselle hydrolyysille
Abstract Biomasse aus Lignocellulose ist der am häufigsten vorkommende nachwachsende Rohstoff der Erde und wird aktuell als eine der besten Alternativen für die Produktion von Biokraftstoffen gesehen. Diese sollen langfristig die fossilen Öl-basierten Produkte ersetzen. Diese Forschungsarbeit untersucht die Herstellung von Zucker aus Lignocellulose basierten Abfällen. Faserschlamm aus der Zellstoffindustrie und Kiefern-Sägemehl aus der Holzverarbeitung wurden durch zwei unterschiedliche Bifunktionelle Vorbehandlungen aufgespalten. Diese Bifunktionelle Vorbehandlung kombiniert zwei Schritte in einem Prozess; die gewöhnliche Dekonstruktion der Biomasse und die Verzuckerung von Polysacchariden aus der Lignocellulose. Das so erzeugte Produkt dient als Ausgangsstoff für die weitere Herstellung von Biokraftstoffen und Chemikalien. Im ersten Teil dieser Forschungsarbeit wurden Kiefern-Sägemehl und Faserschlamm in einer Planeten-Kugelmühle zermahlen und gleichzeitig durch eine Säure depolymerisiert. Der Wirkungsgrad dieser säurekatalysierten mechanischen Depolymerisation wurde hauptsächlich durch die Übertragung der Reibungsenergie, der Mahldauer der Zerkleinerung, der Konzentration der Säure und der Feuchtegehalt der Proben beeinflusst. Etwa 30 wt% Zucker wurde so durch den kurzen Zermahlungsprozess aus Kiefern-Sägemehl und Faserschlamm gewonnen. Dabei wurden die Proben nicht vorbehandelt und enthielten eine geringe Säure/Probe Konzentration. Der zweite Teil der Forschungsarbeit untersucht die Umwandlung von Faserschlamm in Zucker mittels der Ionischen Flüssigkeit (ILs) Hydroxyalkyl Imidazolium Hydrogensulfat. Aus den Faserschlamm Proben konnte 29 wt% Zucker durch eine Mischung von ILs und Wasser gewonnen werden. Das zugesetzte Wasser spielte als Co-Lösemittel eine wichtige Rolle in der Nutzung der Ionischen Flüssigkeit, dessen Viskosität so reduziert wurde. Dies führte zu einem erhöhten Stoffübergang zwischen dem Lösemittel und dem Solvat. Zusätzlich sorgten die Anionen der Ionischen Flüssigkeit für ein saures Milieu in der wässrigen Lösung und ermöglichten so eine gleichzeitige Hydrolyse
Kato, Dawn M. "APPLICATIONS OF GAS CHROMATOGRAPHY/MASS SPECTROMETRY AND CAPILLARY ELECTROPHORESIS FOR THE ANALYSIS OF LIGNOCELLULOSIC BIOMASS PRETREATMENT." UKnowledge, 2014. http://uknowledge.uky.edu/chemistry_etds/45.
Повний текст джерелаWan, Caixia. "Microbial Pretreatment of Lignocellulosic Biomass with Ceriporiopsis Subvermispora for Enzymatic Hydrolysis and Ethanol Production." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1299689015.
Повний текст джерелаPonnaiyan, Thehazhnan Konguvel Ponnaiyan. "Aspects Critical to Advancing Ionic Liquid Pretreatment Technique as a Viable Approach for Lignocellulosic Biomass Conversion." University of Toledo / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1471652917.
Повний текст джерелаYavas, Sinem. "Conversion Of Lignocellulosic Biomass Into Nanofiber By Microfluidization And Its Effect On The Enzymatic Hydrolysis." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612340/index.pdf.
Повний текст джерелаKetsub, Napong. "Development of an integrated process for biogas production from sugarcane trash." Thesis, Queensland University of Technology, 2022. https://eprints.qut.edu.au/235046/1/Napong_Ketsub_Thesis.pdf.
Повний текст джерелаChang, Chen-Wei. "Bioconversion of sugarcane bagasse and soybean hulls for the production of a generic microbial feedstock." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/bioconversion-of-sugarcane-bagasse-and-soybean-hulls-for-the-production-of-a-generic-microbial-feedstock(0144bdd8-5444-468d-9f0f-50613a79be67).html.
Повний текст джерелаMubazangi, Munyaradzi. "Optimization of the conversion of lignocellulosic agricultural by-products to bioethanol using different enzyme cocktails and recombinant yeast strains." Thesis, Stellenbosch : Stellenbosch University, 2011. http://hdl.handle.net/10019.1/6891.
Повний текст джерелаENGLISH ABSTRACT: The need to mitigate the twin crises of peak oil and climate change has driven a headlong rush to biofuels. This study was aimed at the development of a process to efficiently convert steam explosion pretreated (STEX) sugarcane bagasse into ethanol by using combinations of commercial enzyme cocktails and recombinant Saccharomyces cerevisiae strains. Though enzymatic saccharification is promising in obtaining sugars from lignocellulosics, the low enzymatic accessibility of the cellulose and hemicellulose is a key impediment thus necessitating development of an effective pretreatment scheme and optimized enzyme mixtures with essential accessory activities. In this context, the effect of uncatalysed and SO2 catalysed STEX pretreatment of sugarcane bagasse on the composition of pretreated material, digestibility of the water insoluble solids (WIS) fraction and overall sugar recovery was investigated. STEX pretreatment with water impregnation was found to result in a higher glucose recovery (28.1 g/ 100 bagasse) and produced WIS with a higher enzymatic digestibility, thus was used in the optimization of saccharification and fermentation. Response surface methodology (RSM) based on the 33 factorial design was used to optimize the composition of the saccharolytic enzyme mixture so as to maximize glucose and xylose production from steam exploded bagasse. It was established that a combination of 20 FPU cellulase/ g WIS and 30 IU -glucosidases/ g WIS produced the highest desirability for glucose yield. Subsequently the optimal enzyme mixture was used to supplement enzyme activities of recombinant yeast strains co-expressing several cellulases and xylanases in simultaneous saccharification and fermentations SSFs. In the SSFs, ethanol yield was found to be inversely proportional to substrate concentration with the lowest ethanol yield of 70% being achieved in the SSF at a WIS concentration of 10% (w/v). The ultimate process would however be a one-step “consolidated” bio-processing (CBP) of lignocellulose to ethanol, where hydrolysis and fermentation of polysaccharides would be mediated by a single microorganism or microbial consortium without added saccharolytic enzymes. The cellulolytic yeast strains were able to autonomously multiply on sugarcane bagasse and concomitantly produce ethanol, though at very low titres (0.4 g/L). This study therefore confirms that saccharolytic enzymes exhibit synergism and that bagasse is a potential substrate for bioethanol production. Furthermore the concept of CBP was proven to be feasible.
AFRIKAANSE OPSOMMING: Die behoefte om die twee krisisse van piek-olie en klimaatsverandering te versag, het veroorsaak dat mense na biobrandstof as alternatiewe energiebron begin kyk het. Hierdie studie is gemik op die ontwikkeling van 'n proses om stoomontplofde voorafbehandelde (STEX) suikerriet bagasse doeltreffend te omskep in etanol deur die gebruik van kombinasies van kommersiële ensiem mengsels en rekombinante Saccharomyces cerevisiae stamme. Alhoewel ensiematiese versuikering belowend is vir die verkryging van suikers vanaf lignosellulose, skep die lae ensiematiese toeganklikheid van die sellulose en hemisellulose 'n hindernis en dus is die ontwikkeling van' n effektiewe behandelingskema en optimiseerde ensiemmengsels met essensiële bykomstige aktiwiteite noodsaaklik. In hierdie konteks, was die effek van ongekataliseerde en SO2 gekataliseerde stoomontploffing voorafbehandeling van suikerriet bagasse op die samestelling van voorafbehandelde materiaal, die verteerbaarheid van die (WIS) breuk van onoplosbare vastestowwe in water (WIS), en die algehele suikerherstel ondersoek. Daar was bevind dat stoomontploffing behandeling (STEX) met water versadiging lei tot 'n hoër suikerherstel (21.8 g/ 100g bagasse) en dit het WIS met ‘n hoër ensimatiese verteerbaarheid vervaardig en was dus gebruik in die optimalisering van versuikering en fermentasie. Reaksie oppervlak metodologie (RSM), gebasseer op die 33 faktoriële ontwerp, was gebruik om die samestelling van die ‘saccharolytic’ ensiemmengsel te optimaliseer om sodoende die maksimering van glukose en ‘xylose’ produksie van stoomontplofde bagasse te optimaliseer. Daar was bevestig dat ‘n kombinasie van 20 FPU sellulase/ g WIS en 30 IU ‘ -glucosidases/ g’ WIS die hoogste wenslikheid vir glukose-opbrengs produseer het. Daarna was die optimale ensiemmengsel gebruik om ensiemaktiwiteit van rekombinante gisstamme aan te vul, wat gelei het tot die medeuitdrukking van verskillende ‘cellulases’ en ‘xylanases’ in gelyktydige versuikering en fermentasie SSFs. In die SSFs was daar bevind dat die etanol-produksie omgekeerd proporsioneel is tot substraat konsentrasie, met die laagste etanolopbrengs van 70% wat bereik was in die SSF by ‘n WIS konsentrasie van 10% (w/v). Die uiteindelike proses sal egter 'n eenmalige "gekonsolideerde" bioprosessering (CBP) van lignosellulose na etanol behels, waar die hidrolise en fermentasie van polisakkariede deur' n enkele mikroorganisme of mikrobiese konsortium sonder bygevoegde ‘saccharolytic’ ensieme bemiddel sal word. Die ‘cellulolytic’ gisstamme was in staat om vanself te vermeerder op suikerriet bagasse en gelyktydig alkohol te produseer, al was dit by baie lae titres (0.4 g/L). Hierdie studie bevestig dus dat ‘saccharolytic’ ensieme sinergisme vertoon en dat bagasse 'n potensiële substraat is vir bio-etanol produksie. Daar was ook onder meer bewys dat die konsep van CBP uitvoerbaar is.
The National Research Foundation (NRF) for financial support
Reynolds, Wienke [Verfasser]. "Modeling and scale-up of hydrothermal pretreatment in compressible lignocellulosic biomass fixed-beds with changing properties / Wienke Reynolds." München : Verlag Dr. Hut, 2019. http://d-nb.info/1192567641/34.
Повний текст джерелаPachón-Morales, John Alexander. "Torrefaction and grinding of lignocellulosic biomass for its thermochemical valorization : influence of pretreatment conditions on powder flow properties." Thesis, Université Paris-Saclay (ComUE), 2019. http://www.theses.fr/2019SACLC051.
Повний текст джерелаGasification of lignocellulosic biomass for production of second-generation biofuels is a promising technology to meet renewable energy needs. However, feeding and handling problems related to the poor flowability of milled biomass considerably hinder the industrial implementation of Biomass-to-Liquid processes. Torrefaction as pretreatment step, in addition to improving energy density of biomass, also affects the properties of the milled particles (namely size and shape) that significantly influence flow behavior. The evaluation of biomass flow characteristics under different flow conditions is essential to design efficient and trouble-free handling solutions.The aim of this work is to assess the effect of the torrefaction and grinding conditions on the biomass flow behavior. A first part consists of an experimental study in which the flow properties of samples torrefied under different intensities were obtained using a ring shear tester. Flowability is correlated to the intensity of torrefaction, as measured by the global mass loss, for two different wood species. Particle shape seems to be the predominant parameter influencing flowability of powders in a consolidated state. Characterization of non-consolidated flowability through avalanching analysis using an in-house rotating drum was also conducted. Correlations between particle characteristics and flow behavior are thus established.The modelling of biomass flow using the Discrete Element Method (DEM) constitutes a second major part of this research. Challenging aspects of biomass particle modeling are their submillimetric size, low density, elongated shape and cohesive behavior. A material DEM model is implemented using a simplified (multisphere) upscaled representation of particle shape, along with a cohesive contact model. A systematic calibration procedure results in an optimal set of DEM parameters. The experimental shear stress evolution and yield locus can then be realistically reproduced. The avalanching behavior of the powders is also well captured by simulations, both qualitatively and quantitatively. These results highlight the potential of DEM simulations to investigate the effect of particle characteristics, which are driven by torrefaction and grinding conditions, on the flow behavior of powdered biomass
Yoo, Juhyun. "Technical and economical assessment of thermo-mechanical extrusion pretreatment for cellulosic ethanol production." Diss., Kansas State University, 2011. http://hdl.handle.net/2097/9190.
Повний текст джерелаDepartment of Grain Science and Industry
Sajid Alavi
The Renewable Fuel Standard (RFS) in the Energy Independence and Security Act of 2007 has set the goal of 36 billion gallons of annual ethanol production in the U.S. by 2022, which is equivalent to 17.5% of the current gasoline consumption in the U.S. However, corn ethanol is expected to plateau at a level of 7.3% of current gasoline consumption on an energy-equivalent basis. Thus, it is essential to utilize a variety of substrates including lignocellulosic biomass from perennial energy crops such as switch grass, crop residues such as corn and sorghum stover, and agri-industrial co-products such as soybean hulls and wheat bran. Lignocellulosic substrates have a recalcitrant nature and require a pretreatment step that is critical for efficient enzymatic hydrolysis of cellulose and hemicellulose to fermentable sugars. In this study, soybean hulls were used as a model substrate for cellulosic ethanol. A novel thermo-mechanical pretreatment process using extrusion was investigated and compared with two traditional pretreatment methods, dilute acid and alkali hydrolysis, with regard to structural changes in the lignocellulosic substrate, and glucose and ethanol yields. The effect of extrusion parameters, such as barrel temperature, in-barrel moisture and screw speed, on glucose yield from soybean hulls was determined. Optimum processing conditions were screw speed of 350 rpm, maximum barrel temperature of 80C and 40% in-barrel moisture content, resulting in 95% cellulose conversion to glucose. Compared with untreated soybean hulls, the cellulose to glucose conversion of soybean hulls increased by 69.5, 128.4 and 132.2% for dilute acid, alkali and thermo-mechanical pretreatments, respectively. Glucose and other hexose sugars such as mannose and galactose were effectively fermented by Saccharomyces cerevisiae, resulting in ethanol yields of 13.04–15.44 g/L. Fermentation inhibitors glycerol, furfural, 5-(hydroxymethyl)-2-furaldehyde (HMF) and acetic acid were found in the thermo-mechanically pretreated substrate, ranging in concentrations from 0.072–0.431, 0–0.049, 0–0.023 and 0.181–0.278 g/L, respectively, which were lower than those reported from acid hydrolyzed substrates. The economic feasibility of commercial cellulosic ethanol production processes employing dilute acid hydrolysis and thermo-mechanical pretreatment were compared using a system dynamics modeling approach. It was concluded that low feedstock cost and high sugar conversion are important factors that can make cellulosic ethanol production commercially viable. Thermo-mechanical pretreatment was a more promising technology as compared to dilute acid hydrolysis because of the lower capital and operating costs, and higher sugar conversion.
Ishola, Mofoluwake M. "Novel application of membrane bioreactors in lignocellulosic ethanol production : simultaneous saccharification, filtration and fermentation (SSFF)." Doctoral thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-3705.
Повний текст джерелаThesis for the degree of Doctor of Philosophy at the University of Borås to be publicly defended on 31 October 2014, 10.00 a. m. in room E310, University of Borås, Allégatan 1, Borås.
Lennartsson, Patrik. "Zygomycetes and cellulose residuals : hydrolysis, cultivation and applications." Doctoral thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-3608.
Повний текст джерелаAkademisk avhandling som för avläggande av teknologie doktorsexamen vid Chalmers tekniska högskola försvaras vid offentlig disputation den 9 februari 2012, klockan 10.00 i KS101, Kemigården 4, Göteborg.
Lee, Jungeun. "Sustainable Production of Microbial Lipids from Renewable Biomass: Evaluation of Oleaginous Yeast Cultures for High Yield and Productivity." Diss., Kansas State University, 2017. http://hdl.handle.net/2097/35300.
Повний текст джерелаDepartment of Grain Science and Industry
Praveen V. Vadlani
Microbial lipids derived from oleaginous yeasts are a promising alternative source of edible oils due to the following advantages: no requirement of broad lands; availability of year-round production; and no food versus fuels controversy. Oleaginous yeast has an inherent ability to accumulate lipids inside cells and their lipids are preferable as starting materials in oleo-chemical industries because of their distinct fatty acid composition. Lignocellulosic biomass is a promising substrate to supply carbon sources for oleaginous yeast to produce lipids due to the high content of polysaccharides and their abundancy. Lignocellulosic-based sugar streams, which can be generated via pretreatment and enzymatic hydrolysis, contained diverse monosaccharides and inhibitors. The major objectives of this study were: 1) to develop a novel purification method to generate clean sugar stream using sorghum stalks after acid pretreatment; 2) to optimize fermentation conditions for Trichosporon oleaginosus to achieve high yields and productivity of microbial lipids using lignocellulosic hydrolysates; 3) to investigate the potentials of sorghum stalks and switchgrass as feedstocks for microbial lipid production using oleaginous yeast strains, such as T. oleaginosus, Lipomyces starkeyi, and Cryptococcus albidus; 4) to develop an integrated process of corn bran based-microbial lipids production using T. oleaginosus; and 5) to develop bioconversion process for high yields of lipids from switchgrass using engineered Escherichia coli. In our investigation, major inhibitory compounds of lignocellulosic hydrolysates induced by pretreatment were acetic acid, formic acid, hydroxymethyl furfural (HMF) and furfural. The activated charcoal was effective in removing hydrophobic compounds from sorghum stalk hydrolysates. Resin mixtures containing cationic exchangers and anionic exchangers in 7:3 ratio at pH 2.7 completely removed HMF, acetic acid, and formic acid from sorghum stalk hydrolysates. T. oleaginosus was a robust yeast strain for lipid production. In the nitrogen-limited synthetic media, total 22 g/L of lipid titers were achieved by T. oleaginosus with a lipid content of 76% (w/w). In addition, T. oleaginosus efficiently produced microbial lipids from lignocellulosic biomass hydrolysates. The highest lipid titers of 13 g/L lipids were achieved by T. oleaginosus using sorghum stalk hydrolysates with a lipid content of 60% (w/w). L. starkeyi and C. albidus also successfully produced microbial lipids using lignocellulosic hydrolysate with a lipid content of 40% (w/w). Furthermore, corn bran was a promising feedstock for microbial lipid production. The highest sugar yields of 0.53 g/g were achieved from corn bran at the pretreatment condition of 1% acid and 5% solid loading. Microbial lipids were successfully produced from corn bran hydrolysates by T. oleaginosus with lipid yields of 216 mg/g. Engineered E. coli also effectively produced lipids using switchgrass as feedstocks. E. coli ML103 pXZ18Z produced a total of 3.3 g/L free fatty acids with a yield of 0.23 g/g. The overall yield of free fatty acids was 0.12 g/g of raw switchgrass and it was 51 % of the maximum theoretical yield. This study provided useful strategies for the development of sustainable bioconversion processes for microbial lipids from renewable biomass and demonstrated the economic viability of a lignocellulosic based-biorefinery.