Дисертації з теми "Life energy cycle assessment"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Life energy cycle assessment".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Hau, Jorge Luis. "Integrating life cycle assessment, energy and emergy analysis." The Ohio State University, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=osu1407139681.
Повний текст джерелаGastelum, Zepeda Leonardo. "Life Cycle Assessment of a Wave Energy Converter." Thesis, KTH, Industriell ekologi, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-206486.
Повний текст джерелаLohse, Tim. "Life cycle assessment of a plus-energy house." Thesis, KTH, Hållbar utveckling, miljövetenskap och teknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-266478.
Повний текст джерелаFedoruk, M. "Life cycle assessment of energy saving measures in buildings." Thesis, Sumy State University, 2017. http://essuir.sumdu.edu.ua/handle/123456789/64686.
Повний текст джерелаPetrovic, Bojana. "Life cycle assessment and life cycle cost analysis of a single-family house." Licentiate thesis, Högskolan i Gävle, Energisystem och byggnadsteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-36901.
Повний текст джерелаByggbranschen svarar för 35% av den slutliga energianvändningen och 38 % av koldioxidutsläppen på global nivå. Europeiska unionen strävar efter att minska koldioxidutsläppen i byggnadsindustrin med upp till 90% fram till 2050. Därför är det viktigt att beakta byggnaders miljöpåverkan. Syftet med denna avhandling var att undersöka miljöpåverkan och kostnader för ett enfamiljshus i Sverige. I studien har livscykelbedömningen (LCA) och livscykelkostnadsmetoderna (LCC) använts genom att tillämpa livscykelperspektivet ”vagga till grav”. Studien visar en stor minskning av global uppvärmningspotential (GWP), användning av primärenergi (PE) och kostnader vid växling från 50 till 100 års husets livslängd. Resultaten visar en årlig minskning med 27% för utsläpp av växthusgaser och med 18% för användningen av primärenergi. Med tanke på det totala LCC-utfallet, när diskonteringsräntan ökar från 3%, 5% till 7%, minskar de totala kostnaderna avsevärt (60%, 85% till 95%). Det noteras att klimatavtrycket, primärenergianvändningen och kostnaderna från produktionssteget/konstruktionssteget minskar avsevärt, medan underhålls- / utbytessteget visar den motsatta trenden när man byter från 50 till 100 års livslängd. Den operativa energianvändningen, vattenförbrukningen och avfallshanteringen är fortfarande nästan samma när man ändrar livslängden. Vidare betonar resultaten vikten av att använda träbaserade byggmaterial på grund av lägre klimatpåverkan från tillverkningsprocessen jämfört med alternativen. LCA- och LCC-resultaten studerades systematiskt och redovisades visuellt. De koldioxidsnåla och kostnadseffektiva materialen och installationerna måste identifieras i ett tidigt skede av en byggnadskonstruktion genom att välja lämpliga investeringsval som kommer att minska de totala miljö och ekonomiska effekterna på lång sikt. Resultaten från denna avhandling ger ökad förståelse för miljömässiga och ekonomiska konsekvenser som är relevanta för beslutsfattare vid byggnation av ett enfamiljshus.
Yossef, Delav, and Dino Hot. "Comparative life cycle assessment of organic building materials." Thesis, Högskolan Dalarna, Institutionen för information och teknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:du-37774.
Повний текст джерелаDahlsten, Hilda. "Life Cycle Assessment of Electricity from Wave Power." Thesis, Institutionen för energi och teknik, SLU, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-162582.
Повний текст джерелаDavidsson, Simon. "Life Cycle Exergy Analysis of Wind Energy Systems : Assessing and improving life cycle analysis methodology." Thesis, Uppsala universitet, Globala energisystem, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-157185.
Повний текст джерелаJones, Craig I. "Life cycle energy consumption and environmental burdens associated with energy technologies and buildings." Thesis, University of Bath, 2011. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532723.
Повний текст джерелаDong, Jun. "MSWs gasification with emphasis on energy, environment and life cycle assessment." Thesis, Ecole nationale des Mines d'Albi-Carmaux, 2016. http://www.theses.fr/2016EMAC0017/document.
Повний текст джерелаDue to the potential benefits in achieving lower environmental emissions and higher energy efficiency, municipal solid waste (MSW) pyro-gasification has gained increasing attentions in the last years. To develop such an integrated and sustainable MSW treatment system, this dissertation mainly focuses on developing MSW pyro-gasification technique, including both experimental-based technological investigation and assessment modeling. Four of the most typical MSW components (wood, paper, food waste and plastic) are pyro-gasified in a fluidized bed reactor under N2, steam or CO2 atmosphere. Single-component and multi-components mixture have been investigated to characterize interactions regarding the high-quality syngas production. The presence of plastic in MSW positively impacts the volume of gas produced as well as its H2 content. Steam clearly increased the syngas quality rather than the CO2 atmosphere. The data acquired have been further applied to establish an artificial neural network (ANN)-based pyro-gasification prediction model. Although MSW composition varies significantly due to geographic differences, the model is robust enough to predict MSW pyro-gasification performance with different waste sources. To further enhance syngas properties and reduce gasification temperature as optimization of pyro-gasification process, MSW steam catalytic gasification is studied using calcium oxide (CaO) as an in-situ catalyst. The influence of CaO addition, steam flowrate and reaction temperature on H2-rich gas production is also investigated. The catalytic gasification using CaO allows a decrease of more than 100 oC in the reaction operating temperature in order to reach the same syngas properties, as compared with non-catalyst high-temperature gasification. Besides, the catalyst activity (de-activation and re-generation mechanisms) is also evaluated in order to facilitate an industrial application. 650 oC and 800 oC are proven to be the most suitable temperature for carbonation and calcination respectively, while steam hydration is shown to be an effective CaO re-generation method. Afterwards, a systematic and comprehensive life cycle assessment (LCA) study is conducted. Environmental benefits have been achieved by MSW gasification compared with conventional incineration technology. Besides, pyrolysis and gasification processes coupled with various energy utilization cycles are also modeled, with a gasification-gas turbine cycle system exhibits the highest energy conversion efficiency and lowest environmental burden. The results are applied to optimize the current waste-to-energy route, and to develop better pyro-gasification techniques
Ximenes, Naves Alex. "Whole Life Sustainability Assessment at the Building Industry and Constructed Assets, through the Whole Life Costing Assessment and Life Cycle Costing Assessment evaluating the economic and financial aspects." Doctoral thesis, Universitat Rovira i Virgili, 2019. http://hdl.handle.net/10803/670202.
Повний текст джерелаLos edificios de energía de red cero pueden entenderse como edificios, que durante un tiempo dado generan tanta energía como consumen. O bien, desde el punto de vista del suministro o el consumo, la disponibilidad de energía está relacionada con algunos problemas básicos, como las fuentes, la conversión, la distribución, la utilización, el desperdicio, la optimización, la eficiencia y la autonomía. Estos problemas revelan la complejidad del tema de la energía y justifican la atención especial que le presta la comunidad académica. Para obtener resultados tangibles en el análisis de estos sistemas, en nuestro estudio nos centramos en el modelado y la optimización de soluciones energéticas aplicadas a edificios o sistemas similares. Por otro lado, el período de tiempo de los objetos analizados se extendió a su período de ciclo de vida esperado. Los objetivos principales se establecieron como: - Verificar y analizar el estado de la técnica de las soluciones de energía renovable para edificios y activos construidos y la aplicabilidad del análisis de costos de ciclo de vida a estas cuestiones; - Configure modelos reproducibles de edificios y sus principales cargas eléctricas, a través de herramientas de Ingeniería de Procesos Asistidos por Computadora, para proceder a simulaciones y optimización, considerando como fuente de energía primaria la energía solar;
Net-zero energy buildings can be understood as buildings, that for a given time, generate as much energy as they consume. Either, from the point of view of supply or consumption, energy availability is related to some basic issues such as source (s), conversion, distribution, utilization, waste, optimization, efficiency and autonomy. These issues reveal the complexity of the subject of energy and justify the special attention given to it by the academic community. To obtain tangible results in the analysis of these systems, in our study we focus on the modelling and optimization of energy solutions applied to buildings or similar systems. On the other hand, the time frame of the analysed objects was extended to their expected life cycle period. The main objectives were stablished as: - Verify and analyse the state-of-the-art of renewable energy solutions for buildings and constructed assets and the applicability of life cycle costing analysis to these issues; - Configure reproducible models of buildings and their main electrical loads, via Computer Aided Process Engineering tools, to proceed simulations and optimization, considering as primary energy source solar energy; - Quantify, using real-life and hypothetical case studies, the benefits of the proposed solutions, aiming the whole life sustainability assessment through the reduction of the whole life cycle costing; and - Guarantee the reproducibility of the models and main general results of this study and make them public, to contribute with their applicability and further researches.
Prasara-A, Jittima, and s3126806@student rmit edu au. "Comparative life cycle assessment of rice husk utilization in Thailand." RMIT University. Global Studies, Social Science and Planning, 2010. http://adt.lib.rmit.edu.au/adt/public/adt-VIT20100304.122826.
Повний текст джерелаHashemi, Farzad Tabassom. "Life Cycle Assessment (LCA) for a DC-microgrid energy system in Fjärås." Thesis, KTH, Hållbar utveckling, miljövetenskap och teknik, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-263173.
Повний текст джерелаAnvändningen av solpaneler har de senaste åren kommit att öka markant i Sverige. Ökningen beror på det statliga bidraget för installation av solceller som lanserades 2009. Kungsbacka kommun installerade solcellssystem i två olika typer av byggnader, ny och äldre befintlig byggnad. Den nya byggnaden anslöts till direkt mikronät (DC-mikcrogrid) och den äldre byggnaden utrustades med solcellssystem. Detta projekt utför en ’från vaggan till porten’ livscykelanalys (LCA) för energisystemet direkt mikronät. Syftet är i huvudsak att fastställa vilka delar och processer av det direkta mikronätet som bidrar till störst miljöpåverkan genom dess livslängd, det vill säga från vaggan till porten. Vidare undersöker studien återbetalningstiden (Energy PayBack Time, EPBT) och den ackumulerade energianvändningen (Cumulative Energy Demand, CED) för det direkta mikronätet. Studien utför två komparativa LCA varpå det direkta mikronätet först jämförs med solcellssystemet i syfte att fastställa vilket av systemen har större miljöpåverkan. Studien ämnar också jämföra det direkta mikronätet med den genomsnittliga energimixen i Sverige, också avseende miljöpåverkan. LCA metoden följer ISO 14040-ramverket. Studien är baserad på två funktionella enheter vilka består av installerad kilowatt peak (kWp) kapacitet vilken används för att jämföra solcellssystemet och det direkta mikromåttet. Den andra funktionella enheten är 1 kWh levererad elektricitet till bostäder som producerats genom det direkta mikronätet. Denna funktionella enhet används för en ’stand-alone’ analys av det direkta mikronätet i syfte att göra det jämförbart med andra mikrosystem eller system med olika energikällor så som vatten-, vind- och kärnkraft. Resultaten från ‘stand-alone’ livscykelanalysen av det direkta mikronätet visar på att batteriet har en större effekt på mänsklig toxicitet terrestrisk ekotoxicitet, varpå systemet för energihubb bidrar främst till övergödning, abiotisk utarmning, vattenlevande ekotoxicitet och havslevande ekotoxicitet. Monokristallin solpanel har större påverkan på global uppvärmning och övergödning (fossilabränslen). I övrigt är EPBT för det direkta mikronätet cirka 3,7 år vilket innebär att energin beräknas kostnadsfri i cirka 26,5 år, givet att det kan antas att systemets livslängd är 30 år. CED-resultat visar på att microkristallin solpanel är en intensiv energiprocess som kräver mer icke-förnybar energi jämfört med resterande delar av det direkta mikronätet. Jämförelsen mellan det direkta mikronätet och solcellssystemet visar på att det direkta mikronätet har större miljöpåverkan i de flesta kategorier. Detta beror i huvudsak på batterier och växelriktare som har tydlig effekt på resultatet. Av resultatet från CED-analysen framgår att produktion av multikristallin solpanel av solcellssystemet är det mest energikrävande processen i båda kategorierna för förnybar och icke-förnybar energikälla. Vidare framgår av analysen att det direkta mikronätet har en större miljöpåverkan i alla kategorier, jämfört med påverkan från genomsnittet av energimixen i Sverige. Detta beror på att elproduktionen i Sverige mestadels består av vatten- och kärnkraft som tillsammans 2017 utgjorde 83 procent av den totala energiproduktionen. Denna produktion orsakaren mindre miljöbelastning. Trots att det direkta mikronätet påvisar en högre miljöpåverkan än solcellssystemet, är det fortfarande ett alternativ till att generera elektricitet eftersom det direkta mikronätet bidrar till indirekta fördelar såsom energibesparing. Energibesparingen i det direkta mikronnätet sker således genom ökad användning av den egenproducerade energin samt självförsörjning. Det ska vidare tilläggas att ’end-of-life’ procedurerna blir viktiga i synnerhet när de återvunna materialet återanvänds. Vidare bör solpaneler återanvändas vid ’end-of-life’ vilket bör finnas i åtanke för vidarestudier och i samband med att data tillgängliggörs.
Cooper, Jasmin. "Life cycle sustainability assessment of shale gas in the UK." Thesis, University of Manchester, 2017. https://www.research.manchester.ac.uk/portal/en/theses/life-cycle-sustainability-assessment-of-shale-gas-in-the-uk(692252b3-faab-4428-899c-afbcdeec787a).html.
Повний текст джерелаSchueler, Maximilian. "Using Life Cycle Assessment in Agriculture." Doctoral thesis, Humboldt-Universität zu Berlin, 2019. http://dx.doi.org/10.18452/19867.
Повний текст джерелаLife cycle assessment (LCA) analyses the environmental performance of products and services and has become increasingly important also for the environmental assessment of dairy systems. In order to create consistent results for communication, declaration and comparison, the International Dairy Federation (IDF) provides a guideline for the calculation of product-related greenhouse gas (GHG) emissions in the dairy sector. However, the effects of farm data variability and emission factor uncertainty on the comparability of GHG assessments on the farming level are seldom considered. This thesis aims to fill this gap. In the first study, different settings in the definition of energy corrected milk (ECM) and the reference flows were compared in a calculation example based on average farming data. A high bandwidth of the carbon footprint result indicated a severe uncertainty when calculation procedures are not well documented. The second case study examined the production data from six consecutive milk years in an organic dairy farm in northern Germany and its effect on the estimation of product-related GHG emissions. It was shown that data from at least four years is needed to provide reliable results for that farm. The third study dealt with the demand of the IDF guidelines to use at least Tier 2 in the methodology of the Intergovernmental Panel on Climate Change (IPCC). Using data from 20 Norwegian dairy farms, the uncertainty of the carbon footprint using Tier 1 of the IPCC guidelines within the FARM model was assessed. From all 190 direct comparisons of two farms in the study, 78 % of the comparisons were significantly different with a relative difference of 8.7 % being enough to establish significance of the difference. From the three studies it was concluded that existing rules may partly not be precise enough to allow for comparison of farms or farming systems, or partly too strict and thereby hindering the execution of carbon footprint studies.
Stephan, André. "Towards a comprehensive energy assessment of residential buildings: a multi-scale life cycle energy analysis framework." Doctoral thesis, Universite Libre de Bruxelles, 2013. http://hdl.handle.net/2013/ULB-DIPOT:oai:dipot.ulb.ac.be:2013/209465.
Повний текст джерелаHowever, most current building energy assessments focus solely on operational energy overlooking other energy uses such as embodied and transport energy. Embodied energy comprises the energy requirements for building materials production, construction and replacement. Transport energy represents the amount of energy required for the mobility of building users.
Decisions based on partial assessments might result in an increased energy demand during other life cycle stages or at different scales of the built environment. Recent studies have shown that embodied and transport energy demands often account for more than half of the total lifecycle energy demand of residential buildings. Current assessment tools and policies therefore overlook more than 50% of the life cycle energy use.
This thesis presents a comprehensive life cycle energy analysis framework for residential buildings. This framework takes into account energy requirements at the building scale, i.e. the embodied and operational energy demands, and at the city scale, i.e. the embodied energy of nearby infrastructures and the transport energy of its users. This framework is implemented through the development, verification and validation of an advanced software tool which allows the rapid analysis of the life cycle energy demand of residential buildings and districts. Two case studies, located in Brussels, Belgium and Melbourne, Australia, are used to investigate the potential of the developed framework.
Results show that each of the embodied, operational and transport energy requirements represent a significant share of the total energy requirements and associated greenhouse gas emissions of a residential building, over its useful life. The use of the developed tool will allow building designers, town planners and policy makers to reduce the energy demand and greenhouse gas emissions of residential buildings by selecting measures that result in overall savings. This will ultimately contribute to reducing the environmental impact of the built environment.
Doctorat en Sciences de l'ingénieur
info:eu-repo/semantics/nonPublished
Tawatsin, Anuda. "Environmental assessment of waste to energy processes, specifically incineration and anaerobic digestion, using life cycle assessment." Thesis, University of Southampton, 2014. https://eprints.soton.ac.uk/366530/.
Повний текст джерелаDu, Guangli. "Life cycle assessment of bridges, model development and case studies." Doctoral thesis, KTH, Bro- och stålbyggnad, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-161196.
Повний текст джерелаQC 20150311
Lambert, Janine. "A Life Cycle Assessment of a Uranium Mine in Namibia." Scholar Commons, 2016. http://scholarcommons.usf.edu/etd/6291.
Повний текст джерелаButt, Ali Azhar. "Life Cycle Assessment of Asphalt Pavements including the Feedstock Energy and Asphalt Additives." Licentiate thesis, KTH, Väg- och banteknik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-102763.
Повний текст джерелаQC 20120926
Almsalati, Hussam. "Life cycle assessment of villas made by Fiskarhedenvillan, comparison between wood and brick facade." Thesis, Högskolan Dalarna, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:du-28672.
Повний текст джерелаBaboulet, Olivier. "Path Exchange Method for Hybrid Life-Cycle Assessment." Thesis, Norwegian University of Science and Technology, Department of Energy and Process Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9930.
Повний текст джерелаTo keep process-specificity while extending system boundaries hybrid techniques were developed allowing the micro structure of the important parts of a system to be revealed at the same time the entire economic system in which the system is embedded to be covered. Despite the substantial improvements bestowed by hybrid techniques some downsides still hold. Tiered hybrid LCA first does not model feedbacks whereas the relationship between the process-based system and the input-output based system is interactive and second it may suffer from double counting incidents as a process may be instigated in both the IO and LCI data. Integrated hybrid LCA overcomes those aforementioned pitfalls but only at a price of high labor and data intensity. This work aims to elaborate a new hybridisation method that avoids previously mentioned drawbacks. This technique is designed to not operate anymore at the matrix level as is the case for current hybridisation techniques but at the structural path level, per se the finest level of detail possible for the disaggregation of the Leontief inverse, and as such an ad hoc basis to carry out an hybrid analysis. It is argued that the method presented here constitutes a culmination amongst hybridization techniques. Its operability and capabilities are demonstrated before an interpretation from an input-output vantage point is carried out on a case-study not to be found in the literature, a comparison across the faculties of a university.
Miliutenko, Sofiia. "Life Cycle Impacts of Road Infrastructure : Assessment of energy use and greenhouse gas emissions." Licentiate thesis, KTH, Miljöstrategisk analys, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-89885.
Повний текст джерелаQC 20120229
Melbye, Anne-Marit. "Life Cycle Assessment of Norwegian Bioenergy Heat and Power Systems." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-20382.
Повний текст джерелаWangen, Dan Jakob. "Life Cycle Assessment of Power Generation Technologies with CO2 Capture." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19393.
Повний текст джерелаBrown, Nils. "Better Low-energy Buildings : The Contribution of Environmental Rating Tools and Life-Cycle Approaches." Licentiate thesis, KTH, Miljöstrategisk analys (fms), 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-142004.
Повний текст джерелаPaulsen, Jacob. "Life Cycle Assessment for Building Products - The significanse of the usage phase." Doctoral thesis, KTH, Building Sciences and Engineering, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3159.
Повний текст джерелаMenoufi, Karim Ali Ibrahim. "Life Cycle Assessment of novel Building Integrated Concentrating Photovoltaic systems through environmental and energy evaluations." Doctoral thesis, Universitat de Lleida, 2014. http://hdl.handle.net/10803/131056.
Повний текст джерелаConducting LCA studies for PV systems is an essential tool for measuring the sustainability level of a corresponding system. In this sense, and after conducting a theoretical analysis of the LCA studies of PV systems in literature within the context of energy generation, some gaps have been found. These gaps are briefly represented in the lack of variety of LCA indicators, where most of the studies are dependent on the Energy Payback Time as almost the sole environmental indicator, disregarding the use of environmental profile methods. In addition, another two gaps are observed concerning the lack of LCA studies highlighting the building integration from one side, and the use of the concentrating PV technology from another side. Hence, in this thesis, a novel contribution to the field of LCA studies of PV systems is presented. This is achieved through environmentally and energetically evaluating novel Building Integrated Concentrating Photovoltaic (BICPV) systems. The results are presented in terms of Life Cycle Impact Assessment methodologies (environmental profile), as well as the Energy Payback Time and the Energy Return Factor (Energy profile). The results, supported by sensitivity analyses and comparison to a conventional Building Integrated Photovoltaic (BIPV) system, show the significant environmental benefits that can be acquired through BICPV systems. Finally, recommendations for future work and improvements are discussed as well.
La realización de estudios de LCA para sistemas fotovoltaicos es una herramienta esencial para medir su nivel de sostenibilidad. En este sentido, y después de la realización de un análisis teórico de los estudios de LCA de los sistemas fotovoltaicos en la literatura en el contexto de la generación de energía, se han encontrado algunas lagunas. Algunas de estas lagunas se refieren: la falta de variedad de indicadores de LCA, donde la mayoría de los estudios dependen del tiempo de retorno energético, siendo este casi el único indicador medioambiental (no se tiene en cuenta el uso de los métodos de perfil medioambiental). Además, se observan otras dos brechas relativas a la falta de estudios de LCA destacando la integración en edificios de energía solar por un lado, y el uso de la tecnología fotovoltaica de concentración por otro. Por lo tanto, en esta tesis, se presenta una nueva aportación al campo de los estudios LCA de los sistemas fotovoltaicos integrados en edificios. Esto se logra a través de la evaluación medioambiental y energética de los sistemas de concentración fotovoltaica integrados en edificios (BICPV). Los resultados se presentan en términos de metodologías de evaluación del impacto del ciclo de vida (perfil medioambiental), así como el tiempo de amortización de la Energía y su Factor de Retorno (perfil de la Energía). Los resultados, con el apoyo de los análisis de sensibilidad y la comparación con un sistema convencional fotovoltaico para integración en edificios (BIPV), muestran beneficios ambientales significativos que pueden ser obtenidos a través de sistemas BICPV. Finalmente, se discuten las recomendaciones para trabajos y mejoras futuros.
Pektas, Deniz. "A comparative Life Cycle Assessment (LCA) study of centralized and decentralized wastewater heat recovery in Stockholm, Sweden." Thesis, KTH, Energiteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-299856.
Повний текст джерелаStäderna bär ett stort ansvar i klimatkrisen. Detta innebär också att städernas omställning är en nyckelfaktor för att uppnå hållbara samhällen och en hållbar värld. Upp till 90 % av energianvändningen inom den urbana vattencykeln går till varmvattenuppvärmning för slutanvändare. En stor andel av värmen som förses till hushållen i form av varmvatten går förlorad genom avloppen. Enligt Schmid (2008), går ungefär 15 % av värmeenergin som tillförs konventionella nya byggnader förlorad genom avloppen, medan för nya lågenergibyggnader är motsvarande andel 30 %. När byggnadernas transmission-, infiltration-, och exfiltrationsförluster minskar på grund av förbättrad byggdesign, kan man förvänta att andelen av avloppsvärmeförlusterna kommer att öka. För att bättre ta tillvara denna värme i vattnet som spolas ner i avloppen, har värmeåtervinning från avloppsvatten tillämpats och testats i flera städer runt om i världen. Avloppsvatten är en pålitlig och förnybar form av värmeenergi med en relativt stabil temperatur under hela året. Flera teknisk-ekonomiska bedömningar, och ett fåtal livscykelanalyser har utförts hittills. Däremot har ingen jämförande livscykelanalys av centraliserad och decentraliserad värmeåtervinning från avloppsvatten påträffats. Dålig eller otillräcklig planering av värmeåtervinning från avloppsvatten kan leda till konkurrerande teknik. Dessutom kan okoordinerad decentraliserad vårmeåtervinning från avloppsvatten resultera i att avloppsreningsverkens minimikrav på inkommande avloppsvattentemperatur till reningsverken äventyras. Därför har påverkan på miljön på grund av centraliserad, och ett framtida scenario med en ökande andel av decentraliserad värmeåtervinning från avloppsvatten i Stockholm uppskattats och jämförts. Detta utfördes genom att systematiskt analysera energianvändning, utsläpp, och utvinning av naturresurser från tillverkning, transport, drift, interna avloppsreningsverkprocesser, biogasförbrukning, och bortskaffande/återvinning genom att utveckla en livscykelanaysmodell i både Excel och SimaPro. Centraliserad värmeåtervinning från avloppsvatten i Stockholm jämfördes med decentraliserad värmeåtervinning där 10, 20, …, 90, och 100 % av hushållen installerar avloppsvattenvärmeväxlare för duschar. Den minskade avloppsvattentemperaturen och följaktligen den minskade centrala värmeåtervinningen på grund av vårmeåtervinning från duschar uppskattades genom att beräkna den resulterande blandtemperaturen på avloppsvattnet vid inloppet till avloppsrören, och därefter anta en enkel modell för temperaturminskningen på avloppsvattnet längs avloppsrören. Resultaten av livscykelinventeringen, som utvecklades i Excel, tilldelades till respektive miljöpåverkanskategori med miljöpåverkansbedömning. Miljöpåverkansbedömningen med ReCiPe2016 metoden vid mitt- och slutpunkterna visade att det centraliserade alternativet har lägst miljöpåverkan per kWh återvunnen värme från avloppsvatten. Mer specifikt, var miljöpåverkan av det centraliserade alternativet 0,131 kg CO2ekv/kWh, 1,27×10-7 Invaliditetsjusterade livsår/kWh, 3,73×10-10 markbundna artår/kWh, 80,6 kiloton CO2ekv, 1 780 Invaliditetsjusterade livsår, och 5,23 markbundna artår. Detta kan jämföras med resultaten av 50 % decentraliserad värmeåtervinning som var 0,164 kg CO2ekv/kWh, 1,59×10-7 Invaliditetsjusterade livsår/kWh, 4,68×10-10 markbundna artår/kWh, 82,8 kiloton CO2ekv, 1 600 Invaliditetsjusterade livsår, och 4,72 markbundna artår. Alternativet med 100 % decentralisering visade sig ha störst påverkan på alla kategorier. Känsligheten hos modellen undersöktes genom att variera viktiga parametrar.
Butt, Ali Azhar. "Life Cycle Assessment of Asphalt Roads : Decision Support at the Project Level." Doctoral thesis, KTH, Väg- och banteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-156016.
Повний текст джерелаQC 20141118
Tveten, Åsa Grytli. "Life Cycle Assessment of Offshore Wind Electricity Generation in Scandinavia." Thesis, Norwegian University of Science and Technology, Department of Energy and Process Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9981.
Повний текст джерелаIn this study a Multi Regional Input Output model has been developed for the base year 2000, and thereafter extended and hybridized to enable a study of offshore wind power generation in Scandinavia. Foremost the per-unit environmental impact of offshore wind power generation was calculated to an average of 16.5 grams of CO2-eq. per kWh. The MRIO model offers a broad system boundary, covering a complete set of background flows and enables in this way a thorough study of the inter-regional value chains and the corresponding emissions embodied in trade. Scenarios from 2000 to 2030 for future offshore wind power were developed on the basis of GDP projections and projections for future energy demand. One baseline scenario, assuming no further offshore wind power installation, was developed, together with a Medium and a High scenario of future offshore wind power installation. The installed wind power was assumed to replace non-renewable energy sources, primarily domestically and secondly in power importing countries. The Medium and High scenario resulted in a cumulative reduction of 220 Mtons CO2-equivalents and 308 Mtons by 2030, respectively. The Norwegian offshore wind power was by a large exported, while Denmark and Sweden experienced a substantial wind power implementation into their economies, resulting in considerable increase in the percentage share of renewable energy in their electricity mix. This shows that offshore wind power could have a vital role in reaching the European Unions target of a 20% share of renewable energy by 2020, under the assumption that a substantial capacity of wind power is installed. The results from this study provide important guidance and a broad overview of the effect a large wind power implementation will have on the Scandinavian economy.
Kummamuru, Venkata Bharadwaj. "Life cycle assessment and resource management options for bio-ethanol production from cane molasses in Indonesia." Thesis, KTH, Energi och klimatstudier, ECS, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-127863.
Повний текст джерелаHarnessing agricultural feedstock and residues for bioethanol production - towards a sustainable biofuel strategy in Indonesia
Kelly, Katharine Anne. "An environmental life cycle assessment of energy systems leading to a pathway for a low carbon economy." Thesis, University of Bath, 2013. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.629654.
Повний текст джерелаDowson, Mark. "Novel retrofit technologies incorporating silica aerogel for lower energy buildings." Thesis, Brunel University, 2012. http://bura.brunel.ac.uk/handle/2438/7075.
Повний текст джерелаTatarchenko, Olena. "ASSESSMENT OF MACROALGAE HARVESTING FROM THE BALTIC SEA FROM AN ENERGY BALANCE PERSPECTIVE." Thesis, KTH, Industriell ekologi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-108235.
Повний текст джерелаKong, Fanhe. "Chemical Looping Partial Oxidation and Hydrogen Production: Process Simulation, Exergy Analysis and Life Cycle Assessment." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1587591727870495.
Повний текст джерелаEgeskog, Ylva, and Jannik Scheer. "Life Cycle and Water Footprint Assessment of Palm Oil Biodiesel Production in Indonesia." Thesis, KTH, Energi och klimatstudier, ECS, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-182695.
Повний текст джерелаGhose, Agneta. "Life Cycle Assessment of an Active House : Sustainability concepts by integrating energy, environment and well-being." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for bygg, anlegg og transport, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19316.
Повний текст джерелаMilić, Vlatko. "Energy Renovation of an Historic Town Using Life Cycle Cost Optimization : An Assessment of Primary Energy Use and CO2 Emissions." Thesis, Linköpings universitet, Energisystem, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-129367.
Повний текст джерелаHistoriska byggnader, byggnader uppförda före 1945, utgör en tredjedel av det totala byggnadsbeståndet i Sverige. Historiska byggnader har ofta kulturhistoriska värden som måste beaktas vid energieffektiviseringar. Detta examensarbete syftar till att undersöka påverkan på primärenergianvändning och CO2-utsläpp genom optimering av livscykelkostnaderna (LCC) för historiska byggnader. Som fallstudie används 920 historiska byggnader i Visbys innerstad, indelade i tolv olika typbyggnader (6 träbyggnader, 1w-6w, och 6 stenbyggnader, 1s-6s). Tre fall undersöks: referensfall utan implementerade energieffektiviseringsåtgärder (fall 1), lägsta möjliga LCC (fall 2) och en minskning av energianvändningen med 50 % (fall 3). Inom examensarbetets kommer även de mest lönsamma energieffektiviseringsåtgärderna tas fram. Examensarbetet kommer också att visa hur lönsamheten för energirenovering varierar mellan de olika typbyggnaderna. Vid utförandet av examensarbetet tillämpas en tvärvetenskaplig metod som beaktar både kulturhistoriska värden och energibesparing. Tyngdpunkten ligger dock på användningen av programmet Optimal Energy Retrofit Advisory-Mixed Integer Linear Programming (OPERA-MILP), som är en del av den tvärvetenskapliga metoden. Med användningen av OPERA-MILP erhålls den kostnadsoptimala energieffektiviseringsstrategin för en byggnad. Programmet beaktar alla energirelaterade investeringskostnader, samt investering- och driftkostnader för värmetillförselsystem, under en bestämd tidsperiod. Resultaten visar unika energieffektiviseringspaket för de olika typbyggnaderna med en potential att sänka totala LCC för byggnadsbeståndet med 4-11 % och samtidigt minska energianvändningen med mer än 50 %. Examensarbetet visar också en möjlig minskning i primärenergianvändning med 24-57 %. CO2-utsläppen varierar mycket beroende på vilka antaganden görs relaterat till elektricitetsproduktion och användning av biomassa; resultaten visar ökningar upp till 224 % i CO2-utsläpp men också minskningar ned till 85 %. Samtliga typbyggnader är ekonomiskt lönsamma att energirenovera med LCC-besparingar på 1,4-11,8 SEK med en livscykel satt till 50 år för varje årligen sparad kWh, förutom i fall 3 då kostnader uppstår för varje årligen sparad kWh med 10,0-17,2 SEK, för ett antal av typbyggnaderna.
Potential and Policies for Energy Efficiency in Swedish Buildings Built Before 1945 (Stage II) - Energy Systems Analysis
Merugula, Laura. "Supporting Sustainable Markets Through Life Cycle Assessment: Evaluating emerging technologies, incorporating uncertainty and the consumer perspective." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1373461844.
Повний текст джерелаNes, Rasmus Nikolai. "Life cycle assessment of an offshore electricity grid interconnecting Northern Europe." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19237.
Повний текст джерелаCarless, Travis Seargeoh Emile. "Framing a New Nuclear Renaissance Through Environmental Competitiveness, Community Characteristics, and Cost Mitigation Through Passive Safety." Research Showcase @ CMU, 2018. http://repository.cmu.edu/dissertations/1151.
Повний текст джерелаGreening, Benjamin Paul. "Life cycle environmental and economic sustainability assessment of micro-generation technologies in the UK domestic sector." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/life-cycle-environmental-and-economic-sustainability-assessment-of-microgeneration-technologies-in-the-uk-domestic-sector(ed331530-598c-45bf-8f1f-4e142814bf20).html.
Повний текст джерелаBaumert, Sophia [Verfasser]. "Life cycle assessment of carbon and energy balances in Jatropha production systems of Burkina Faso / Sophia Baumert." Bonn : Universitäts- und Landesbibliothek Bonn, 2014. http://d-nb.info/1052652662/34.
Повний текст джерелаPatterson, Tim. "Life cycle analysis of biomass derived hydrogen and methane as fuel vectors, and a critical analysis of their future development in the UK." Thesis, University of South Wales, 2013. https://pure.southwales.ac.uk/en/studentthesis/life-cycle-analysis-of-biomass-derived-hydrogen-and-methane-as-fuel-vectors-and-a-critical-analysis-of-their-future-development-in-the-uk(3a1ece33-8a70-435f-bb36-af55785b6003).html.
Повний текст джерелаSimon, Peter. "Assessment of Embodied Energy and Carbon Emissions of the Swansea Bay Tidal Lagoon from a Life Cycle Perspective." Thesis, Mittuniversitetet, Avdelningen för ekoteknik och hållbart byggande, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-25145.
Повний текст джерелаNoori, Mehdi. "Sustainability Assessment of Wind Energy for Buildings." Master's thesis, University of Central Florida, 2013. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/5995.
Повний текст джерелаM.S.C.E.
Masters
Civil, Environmental, and Construction Engineering
Engineering and Computer Science
Civil Engineering
Switala-Elmhurst, Katherine. "Life Cycle Assessment of Residential Windows: Analyzing the Environmental Impact of Window Restoration versus Window Replacement." Diss., Temple University Libraries, 2014. http://cdm16002.contentdm.oclc.org/cdm/ref/collection/p245801coll10/id/275743.
Повний текст джерелаPh.D.
New windows are rated based on their energy performance during the use phase. This rating neglects the overall environmental impact caused by raw material extraction, manufacturing, maintenance and disposal. Due to the number of residential window replacements occurring today in the United States, there is a growing need to quantify the sustainability of window preservation as an alternative to window replacement. This study assessed the environmental impact of historic wood window restoration versus window replacement for the entire "cradle to grave" life cycle of the window assembly. This study focused on a typical, mid-twentieth century housing development in the Northeast United States using four window configurations as follows: 1. Restored original wood window with a new exterior aluminum storm window; 2. PVC replacement window; 3. Aluminum-clad wood replacement window; 4. Wood replacement window. The dissertation assessed the life cycle of window configurations using GaBi Software. The life cycle inventories were analyzed using the TRACI 2.1 impact method which translated the environmental consequences of the life cycle assessment processes into quantifiable environmental impacts. The dissertation also considered window thermal performance and life cycle costs. When considering life cycle environmental impacts, thermal performance, energy savings and material costs, the results indicated that wood window restoration was the best option when compared to replacement windows considered in this study; however, the results indicated that building service life and window service life assumptions could impact results. Thermal performance testing of windows revealed that window restoration techniques undertaken in this study improved the window's overall thermal performance. The testing also indicated that the effects of air infiltration had minimal influence on the performance of the restored window assembly when compared to a high performance replacement window. The results of the energy model exhibited only a small annual energy savings between the restored window assembly and a high performance replacement window. The payback cost analysis revealed that, while there was an immediate financial benefit of window replacement with the PVC option, window replacement frequency and overall life cycle environmental impacts would favor the restored window option.
Temple University--Theses
Martinez, Pancorbo Pablo. "Cradle-to-gate life-cycle assessment of future materials for commercial lithium-ion batteries : Raw Materials issues." Thesis, Högskolan i Gävle, Avdelningen för bygg- energi- och miljöteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-27987.
Повний текст джерелаI presented my work via Skype while sharing the screen.
Miliutenko, Sofiia. "Consideration of life cycle energy use and greenhouse gas emissions for improved road infrastructure planning." Doctoral thesis, KTH, Miljöstrategisk analys (fms), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-184163.
Повний текст джерелаQC 20160329