Статті в журналах з теми "Laser assisted turning"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Laser assisted turning".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Wu, Xue Feng, Hong Zhi Zhang, and Yang Wang. "Laser Assisted Turning of Sintered Silicon Nitride." Key Engineering Materials 458 (December 2010): 113–18. http://dx.doi.org/10.4028/www.scientific.net/kem.458.113.
Повний текст джерелаArrizubieta, J. I., F. Klocke, S. Gräfe, K. Arntz, and A. Lamikiz. "Thermal Simulation of Laser-assisted Turning." Procedia Engineering 132 (2015): 639–46. http://dx.doi.org/10.1016/j.proeng.2015.12.542.
Повний текст джерелаHabrat, Witold F. "Experimental Investigation of Effect of the Laser-Assisted Finish Turning of Ti-6Al-4V Alloy on Machinability Indicators." Solid State Phenomena 261 (August 2017): 135–42. http://dx.doi.org/10.4028/www.scientific.net/ssp.261.135.
Повний текст джерелаChwalczuk, Tadeusz, Paweł Lisiak, Piotr Siwak, Damian Przestacki, and Piotr Szablewski. "Laser assisted turning of Inconel 718 alloy." Mechanik, no. 8-9 (September 2016): 1118–19. http://dx.doi.org/10.17814/mechanik.2016.8-9.276.
Повний текст джерелаChwalczuk, Tadeusz, Damian Przestacki, Piotr Szablewski, and Agata Felusiak. "Microstructure characterisation of Inconel 718 after laser assisted turning." MATEC Web of Conferences 188 (2018): 02004. http://dx.doi.org/10.1051/matecconf/201818802004.
Повний текст джерелаBejjani, R., B. Shi, H. Attia, and M. Balazinski. "Laser assisted turning of Titanium Metal Matrix Composite." CIRP Annals 60, no. 1 (2011): 61–64. http://dx.doi.org/10.1016/j.cirp.2011.03.086.
Повний текст джерелаWarap, N. M., Zazuli Mohid, and Erween Abdul Rahim. "Laser Assisted Machining of Titanium Alloys." Materials Science Forum 763 (July 2013): 91–106. http://dx.doi.org/10.4028/www.scientific.net/msf.763.91.
Повний текст джерелаZhao, Fu, William Z. Bernstein, Gautam Naik, and Gary J. Cheng. "Environmental assessment of laser assisted manufacturing: case studies on laser shock peening and laser assisted turning." Journal of Cleaner Production 18, no. 13 (September 2010): 1311–19. http://dx.doi.org/10.1016/j.jclepro.2010.04.019.
Повний текст джерелаFelusiak, Agata, Tadeusz Chwalczuk, and Martyna Wiciak. "Surface Roughness Characterization of Inconel 718 after Laser Assisted Turning." MATEC Web of Conferences 237 (2018): 01004. http://dx.doi.org/10.1051/matecconf/201823701004.
Повний текст джерелаNasr, Mohamed N. A., Mohamed Balbaa, and Hassan Elgamal. "Modelling Machining-Induced Residual Stresses after Laser-Assisted Turning of Steels." Advanced Materials Research 996 (August 2014): 622–27. http://dx.doi.org/10.4028/www.scientific.net/amr.996.622.
Повний текст джерелаWiciak, Martyna, Tadeusz Chwalczuk, and Agata Felusiak. "Experimental Investigation and Performance Analysis of Ceramic Inserts in Laser Assisted Turning of Waspaloy." MATEC Web of Conferences 237 (2018): 01003. http://dx.doi.org/10.1051/matecconf/201823701003.
Повний текст джерелаSzymański, Michał, and Mateusz Kukliński. "Geometrical structure of surface after turning of 316L stainless steel in laser assisted conditions." Archives of Mechanical Technology and Materials 39, no. 1 (January 1, 2019): 66–73. http://dx.doi.org/10.2478/amtm-2019-0012.
Повний текст джерелаYou, Kaiyuan, Fengzhou Fang, and Guangpeng Yan. "Surface generation of tungsten carbide in laser-assisted diamond turning." International Journal of Machine Tools and Manufacture 168 (September 2021): 103770. http://dx.doi.org/10.1016/j.ijmachtools.2021.103770.
Повний текст джерелаDeswal, Neeraj, and Ravi Kant. "Machinability Analysis During Laser Assisted Turning of Aluminium 3003 Alloy." Lasers in Manufacturing and Materials Processing 9, no. 1 (January 17, 2022): 56–71. http://dx.doi.org/10.1007/s40516-022-00163-9.
Повний текст джерелаYou, Kaiyuan, and Fengzhou Fang. "High effective laser assisted diamond turning of binderless tungsten carbide." Journal of Materials Processing Technology 302 (April 2022): 117505. http://dx.doi.org/10.1016/j.jmatprotec.2022.117505.
Повний текст джерелаAbdulghani, Omar, Mohamed Sobih, Amro Youssef, and Abdel-Monem El-Batahgy. "Modeling and Simulation of Laser Assisted Turning of Hard Steels." Modeling and Numerical Simulation of Material Science 03, no. 04 (2013): 106–13. http://dx.doi.org/10.4236/mnsms.2013.34014.
Повний текст джерелаKim, Kwang-Sun, Jae-Hyun Kim, Jun-Young Choi, and Choon-Man Lee. "A review on research and development of laser assisted turning." International Journal of Precision Engineering and Manufacturing 12, no. 4 (August 2011): 753–59. http://dx.doi.org/10.1007/s12541-011-0100-1.
Повний текст джерелаKashani, Mostafa M., Mohammad R. Movahhedy, Mohammad T. Ahmadian, and Reza S. Razavi. "In-process determination of laser beam absorption coefficient for laser-assisted turning processes." International Journal of Advanced Manufacturing Technology 92, no. 5-8 (April 13, 2017): 2929–38. http://dx.doi.org/10.1007/s00170-017-0326-x.
Повний текст джерелаWei, Yuan, Chaneel Park, and Simon S. Park. "Experimental Evaluation of Direct Laser Assisted Turning through a Sapphire Tool." Procedia Manufacturing 10 (2017): 546–56. http://dx.doi.org/10.1016/j.promfg.2017.07.044.
Повний текст джерелаMohammadi, Hossein, Deepak Ravindra, Sai K. Kode, and John A. Patten. "Experimental work on micro laser-assisted diamond turning of silicon (111)." Journal of Manufacturing Processes 19 (August 2015): 125–28. http://dx.doi.org/10.1016/j.jmapro.2015.06.007.
Повний текст джерелаKim, Jongsu, and Bongchul Kang. "Machining characteristics of micro lens mold in laser-assisted micro-turning." Journal of Mechanical Science and Technology 32, no. 4 (April 2018): 1769–74. http://dx.doi.org/10.1007/s12206-018-0333-3.
Повний текст джерелаH., BAKER, YOSSEF F., KHOAIL M., and MOUGHITH M. "THE INFLUENCE OF LASER ASSISTED TURNING PARAMETERS ON CUTTING FORCES-NEW APPROACH." International Conference on Applied Mechanics and Mechanical Engineering 12, no. 12 (May 1, 2006): 229–38. http://dx.doi.org/10.21608/amme.2006.42641.
Повний текст джерелаKieruj, Piotr, and Mateusz Kuklinski. "Tool life of diamond inserts after laser assisted turning of cemented carbides." MATEC Web of Conferences 121 (2017): 03011. http://dx.doi.org/10.1051/matecconf/201712103011.
Повний текст джерелаZhai, Changtai, Jinkai Xu, Yiquan Li, Yonggang Hou, Shuaishuai Yuan, Qimeng Liu, and Xu Wang. "The study on surface integrity on laser-assisted turning of SiCp/2024Al." International Journal of Optomechatronics 14, no. 1 (January 1, 2020): 29–43. http://dx.doi.org/10.1080/15599612.2020.1789251.
Повний текст джерелаDumitrescu, P., P. Koshy, J. Stenekes, and M. A. Elbestawi. "High-power diode laser assisted hard turning of AISI D2 tool steel." International Journal of Machine Tools and Manufacture 46, no. 15 (December 2006): 2009–16. http://dx.doi.org/10.1016/j.ijmachtools.2006.01.005.
Повний текст джерелаChoi, Jun Young, and Choon Man Lee. "Evaluation of Cutting Force and Surface Temperature for Round and Square Member in Laser Assisted Turn-Mill." Applied Mechanics and Materials 229-231 (November 2012): 718–22. http://dx.doi.org/10.4028/www.scientific.net/amm.229-231.718.
Повний текст джерелаYou, Kaiyuan, Fengzhou Fang, Guangpeng Yan, and Yue Zhang. "Experimental Investigation on Laser Assisted Diamond Turning of Binderless Tungsten Carbide by In-Process Heating." Micromachines 11, no. 12 (December 14, 2020): 1104. http://dx.doi.org/10.3390/mi11121104.
Повний текст джерелаKim, Jae-hyun, Kwang-sun Kim, Jun-young Choi, and Choon-man Lee. "Estimation of deformed laser heat sources and thermal analysis on laser assisted turning of square member." Journal of Central South University 19, no. 2 (January 28, 2012): 402–7. http://dx.doi.org/10.1007/s11771-012-1018-1.
Повний текст джерелаHu, Yizhong, Jianbing Meng, Zhenwei Hu, Haian Zhou, Xiaosheng Luan, Bingqi Huang, and Xiuting Wei. "Machining characteristics of Ti6Al4V alloy turning assisted by laser heating and ultrasonic atomization." Applied Optics 60, no. 9 (March 15, 2021): 2583. http://dx.doi.org/10.1364/ao.418023.
Повний текст джерелаAttia, H., S. Tavakoli, R. Vargas, and V. Thomson. "Laser-assisted high-speed finish turning of superalloy Inconel 718 under dry conditions." CIRP Annals 59, no. 1 (2010): 83–88. http://dx.doi.org/10.1016/j.cirp.2010.03.093.
Повний текст джерелаKohail, A. "Evaluation of tool wear behavior when laser assisted turning of die steel using Nd:Yag pulsed laser (Dept.M)." MEJ. Mansoura Engineering Journal 33, no. 1 (December 1, 2020): 1–8. http://dx.doi.org/10.21608/bfemu.2020.126822.
Повний текст джерелаBodlapati, Charan, Di Kang, Jayesh Navare, Robert Turnbull, Yuxiang Zhong, and Hossein Shahinian. "Cutting performance of laser assisted diamond turning of calcium fluoride with different crystal orientations." Applied Optics 60, no. 9 (March 12, 2021): 2465. http://dx.doi.org/10.1364/ao.415265.
Повний текст джерелаyoussef, Amro, Ahmed Kohail, and Mohamed Bakir. "Investigation of the parameters influencing pulsed laser assisted turning of DIN. 1.2379 tool steel." Journal of Engineering Science and Military Technologies 4, no. 1 (March 1, 2020): 162–70. http://dx.doi.org/10.21608/ejmtc.2020.49727.1158.
Повний текст джерелаLee, Choon-Man, and Eun Jung Kim. "A Study on the Machining Characteristics of a Turning-Center by Laser Assisted Machining." Journal of the Korean Society for Precision Engineering 35, no. 6 (June 1, 2018): 597–601. http://dx.doi.org/10.7736/kspe.2018.35.6.597.
Повний текст джерелаPrzestacki, D., P. Szymanski, and S. Wojciechowski. "Formation of surface layer in metal matrix composite A359/20SiCP during laser assisted turning." Composites Part A: Applied Science and Manufacturing 91 (December 2016): 370–79. http://dx.doi.org/10.1016/j.compositesa.2016.10.026.
Повний текст джерелаHao, Xiuqing, Hao Yan, Jinjin Han, Chenjiao Yao, and Ning He. "Experimental research on pulse laser assisted micro turning of ZrO2 ceramic." International Journal of Nanomanufacturing 14, no. 2 (2018): 165. http://dx.doi.org/10.1504/ijnm.2018.091582.
Повний текст джерелаHe, Ning, Jinjin Han, Chenjiao Yao, Xiuqing Hao, and Hao Yan. "Experimental research on pulse laser assisted micro turning of ZrO2 ceramic." International Journal of Nanomanufacturing 14, no. 2 (2018): 165. http://dx.doi.org/10.1504/ijnm.2018.10012676.
Повний текст джерелаKhatir, Farzad Ahmadi, Mohammad Hossein Sadeghi, and Samet Akar. "Investigation of surface integrity in the laser-assisted turning of AISI 4340 hardened steel." Journal of Manufacturing Processes 61 (January 2021): 173–89. http://dx.doi.org/10.1016/j.jmapro.2020.09.073.
Повний текст джерелаPrasad, Balla Srinivasa, Javvadi Umamaheswara Rao, and A. Gopala Krishna. "Analysis of vibration signals to quantify displacement amplitude in the monitoring of vibration-assisted turning." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 233, no. 1 (November 9, 2017): 35–47. http://dx.doi.org/10.1177/0954408917742196.
Повний текст джерелаGorin, Alexander, and M. Mohan Reddy. "Advanced Ceramics: Some Challenges and Solutions in Machining by Conventional Methods." Applied Mechanics and Materials 624 (August 2014): 42–47. http://dx.doi.org/10.4028/www.scientific.net/amm.624.42.
Повний текст джерелаBose, P. S. C., N. Selvaraj, and Chakala Naresh. "RSM-based optimisation of machining forces and surface roughness when laser-assisted turning Nitinol alloy." International Journal of Materials and Product Technology 1, no. 1 (2022): 1. http://dx.doi.org/10.1504/ijmpt.2022.10050444.
Повний текст джерелаYou, Kaiyuan, Guangyu Liu, and Fengzhou Fang. "Investigation of surface integrity on laser pre-heat assisted diamond turning of binderless tungsten carbide." Procedia CIRP 108 (2022): 566–70. http://dx.doi.org/10.1016/j.procir.2022.03.089.
Повний текст джерелаAttia, M. Helmi, Philip Mark Joseph, and Rachid M’Saoubi. "Determination of convective heat transfer from rotating workpieces in dry and laser-assisted turning processes." Advances in Materials and Processing Technologies 2, no. 2 (April 2, 2016): 324–38. http://dx.doi.org/10.1080/2374068x.2016.1184048.
Повний текст джерелаTran, Trung Huynh, Quynh Le Diem Nguyen, Thao Thi Do, Khue Nhut Truong, Quang Vinh Dang, and Man Thi Ngoc Bui. "Evaluation of Carbon Dioxide Laser–Assisted Treatment for Gingival Melanin Hyperpigmentation." Dentistry Journal 10, no. 12 (December 13, 2022): 238. http://dx.doi.org/10.3390/dj10120238.
Повний текст джерелаVignesh, M., K. Venkatesan, R. Ramanujam, and P. Kuppan. "A Parametric Optimization on Cutting Force during Laser Assisted Machining of Inconel 718 Alloy." Applied Mechanics and Materials 787 (August 2015): 460–64. http://dx.doi.org/10.4028/www.scientific.net/amm.787.460.
Повний текст джерелаNurul Amin, A. K. M., Muammer Din Arif, Noor Hawa B. Mohamad Rasdi, Khairus Syakirah B. Mahmud, Abdul Hakam B. Ibrahim, Mohd Firdaus B. Zawani, and Amir Faris B. Abdul Malik. "Identification of Optimum Heating Temperature in Thermal Assisted Turning of Stainless Steel Using Three Different Approaches." Applied Mechanics and Materials 393 (September 2013): 194–99. http://dx.doi.org/10.4028/www.scientific.net/amm.393.194.
Повний текст джерелаMohammadi, Hossein, H. Bogac Poyraz, Deepak Ravindra, and John A. Patten. "An Experimental Study on Single Point Diamond Turning of an Unpolished Silicon Wafer via Micro-Laser Assisted Machining." Advanced Materials Research 1017 (September 2014): 175–80. http://dx.doi.org/10.4028/www.scientific.net/amr.1017.175.
Повний текст джерелаHe, Wenbin, Chuangting Lin, Tung-An Wu, Xian Tang, Xiao Chen, and Jianfeng Xu. "An improved beetle antennae search algorithm with Lévy flight and its application in micro-laser assisted turning." Advanced Engineering Informatics 54 (October 2022): 101732. http://dx.doi.org/10.1016/j.aei.2022.101732.
Повний текст джерелаSultan, F. Abdullah, and R. Panneer. "Improving Machinability in Conventional Turning of Ti-6Al-4V Using Work Piece Pre-Heating with Standard Cutting Tools." Applied Mechanics and Materials 813-814 (November 2015): 347–51. http://dx.doi.org/10.4028/www.scientific.net/amm.813-814.347.
Повний текст джерелаEscaich, Cécile, Zhongde Shi, Luc Baron, and Marek Balazinski. "Machining of Titanium Metal Matrix Composites: Progress Overview." Materials 13, no. 21 (November 6, 2020): 5011. http://dx.doi.org/10.3390/ma13215011.
Повний текст джерела