Готові списки джерел за темами / Laser-assisted synthesis

Добірка наукової літератури з теми "Laser-assisted synthesis"

Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Laser-assisted synthesis".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Laser-assisted synthesis"

1

W. Xiong, W. Xiong, Y. Gao Y. Gao, M. Mahjouri-Samani M. Mahjouri-Samani, Y. S. Zhou Y. S. Zhou, M. Mitchell M. Mitchell, J. B. Park J. B. Park, and Y. F. Lu Y. F. Lu*. "Laser Assisted Fabrication for Controlled Single-Walled Carbon Nanotube Synthesis and Processing(Invited Paper)." Chinese Journal of Lasers 36, no. 12 (2009): 3125–32. http://dx.doi.org/10.3788/cjl20093612.3125.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Amendola, Vincenzo. "Laser‐Assisted Synthesis of Non‐Equilibrium Nanoalloys." ChemPhysChem 22, no. 7 (March 15, 2021): 622–24. http://dx.doi.org/10.1002/cphc.202000987.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Fantoni, R., E. Borsella, S. Piccirillo, C. A. Nannetti, R. Ceccato, and S. Enzo. "Laser assisted synthesis of ultrafine silicon powder." Applied Surface Science 43, no. 1-4 (December 1989): 308–15. http://dx.doi.org/10.1016/0169-4332(89)90231-6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Karipbayev, Zh. "TIME-RESOLVED LUMINESCENCE EXCITED WITH N2 LASER OF YAG:CE CERAMICS FORMED BY ELECTRON BEAM ASSISTED SYNTHESIS." Eurasian Physical Technical Journal 17, no. 1 (June 2020): 73–76. http://dx.doi.org/10.31489/2020no1/73-76.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Narayan, Arun, Lars Landström, and Mats Boman. "Laser-assisted synthesis of ultra small metal nanoparticles." Applied Surface Science 208-209 (March 2003): 137–41. http://dx.doi.org/10.1016/s0169-4332(02)01352-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Torres-Mendieta, Rafael, Ondřej Havelka, Michal Urbánek, Martin Cvek, Stanisław Wacławek, Vinod Vellora Thekkae Padil, Darina Jašíková, Michal Kotek, and Miroslav Černík. "Laser-assisted synthesis of Fe-Cu oxide nanocrystals." Applied Surface Science 469 (March 2019): 1007–15. http://dx.doi.org/10.1016/j.apsusc.2018.11.058.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Luches, A., S. A. Mulenko, V. P. Veiko, A. P. Caricato, V. A. Chuiko, Y. V. Kudryavtsev, A. V. Lopato, A. A. Petrov, F. Romano, and D. Valerini. "Laser-assisted synthesis of semiconductor chromium disilicide films." Applied Surface Science 253, no. 15 (May 2007): 6512–16. http://dx.doi.org/10.1016/j.apsusc.2007.01.023.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Wawrzyniak, Jakub, Jakub Karczewski, Jacek Ryl, Katarzyna Grochowska, and Katarzyna Siuzdak. "Laser-Assisted Synthesis and Oxygen Generation of Nickel Nanoparticles." Materials 13, no. 18 (September 13, 2020): 4068. http://dx.doi.org/10.3390/ma13184068.

Повний текст джерела
Анотація:
Nowadays, more than ever, environmental awareness is being taken into account when it comes to the design of novel materials. Herein, the pathway to the creation of a colloid of spherical, almost purely metallic nickel nanoparticles (NPs) through pulsed laser ablation in ethanol is presented. A complex description of the colloid is provided through UV-vis spectroscopy and dynamic light scattering analysis, ensuring insight into laser-induced nanoparticle homogenization and size-control of the NPs. The transmission electron spectroscopy revealed spherical nanoparticles with a narrow size distribution, whereas the energy-dispersive X-ray spectroscopy accompanied by the X-ray photoelectron spectroscopy revealed their metallic nature. Furthermore, an example of the application of the colloidal nanoparticles is presented, where a quick, five-min ultrasound modification results in over an order of magnitude higher current densities in the titania-based electrode for the oxygen evolution reaction.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Crouse, C. A., E. Shin, P. T. Murray, and J. E. Spowart. "Solution assisted laser ablation synthesis of discrete aluminum nanoparticles." Materials Letters 64, no. 3 (February 2010): 271–74. http://dx.doi.org/10.1016/j.matlet.2009.10.060.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Hanus, F., and M. Wautelet. "Kinetics of cw laser‐assisted synthesis of thin CuxTeyfilms." Journal of Applied Physics 68, no. 7 (October 1990): 3307–12. http://dx.doi.org/10.1063/1.346382.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Laser-assisted synthesis"

1

Reppert, Jason Brooks. "Laser-assisted synthesis and optical properties of bismuth nanorods." Connect to this title online, 2007. http://etd.lib.clemson.edu/documents/1193080419/.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Elihn, Karine. "Synthesis of carbon-covered iron nanoparticles by photolysis of ferrocene." Doctoral thesis, Uppsala : Acta Universitatis Upsaliensis : Univ.-bibl. [distributör], 2002. http://publications.uu.se/theses/91-554-5302-3/.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Check, Michael Hamilton. "Synthesis and Characterization of Low Dimensionality Carbon Nanostructures." University of Dayton / OhioLINK, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1386089389.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Hoberg, Anne-Mette. "Intricacies regarding matrix-assisted laser desorption/ionisation of synthetic polymers." Thesis, University of Warwick, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.342522.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Lloyd, Paul M. "Matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry of synthetic polymers." Thesis, University of Warwick, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.343833.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Snel, Marten Francis. "Matrix assisted laser desorption/ionisation time-of-flight mass spectroscopic analysis of synthetic polymers." Thesis, University of Edinburgh, 1999. http://hdl.handle.net/1842/11419.

Повний текст джерела
Анотація:
Matrix assisted laser desorption/ionisation time-of-flight mass spectrometry was used to mass analyse a range of synthetic polymers. Synthetic polymers with average molecular weights of up to 20000 Da were investigated. The polymers studied included polyglycols, polystyrene and poly(methyl methacrylate). Information on the repeat units, endgroups and average molecular weights was obtained. The stability of metal ion/polymer adducts was studied for poly(ethylene glycol) (PEG), poly(propylene glycol) (PPG) and poly(methyl methacrylate) (PMMA) adducts of lithium, sodium, potassium and rubidium, as well as the silver ion adduct of polystyrene. No post source decay (PSD) was seen for the lithium and sodium adducts of PEG, PPG and PMMA, however potassium and rubidium adducts of these polymers did undergo PSD. Rubidium adducts were seen to decay more readily than the potassium adducts. Pulsed-field delayed ion extraction experiments were carried out. These experiments suggest that gas-phase reactions contribute comparatively little to the cation adduct formation of synthetic polymers. Further experiments showed that the ratio between salt and matrix in the sample did not affect the ionisation behaviour. During the course of this work several improvements were made to the mass spectrometer used. The length of the time-of-flight mass analyser was increased and an inline detector was fitted to the existing instrument. The addition of the second detector made it possible to operate the instrument in a linear mode. A mass gate was added to make it possible to avoid detector saturation by low-mass ions.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Mowat, Ian A. "Synthetic polymer analysis using matrix assisted laser desorption/ionization time-of-flight mass spectrometry." Thesis, University of Edinburgh, 1996. http://hdl.handle.net/1842/12128.

Повний текст джерела
Анотація:
The aim of the work described in this thesis was to assess 'Matrix Assisted Laser Desorption/Ionization' (MALDI) Time-of-Flight mass spectrometry as a possible technique for the analysis of synthetic polymers. A compact home-built time-of-flight mass spectrometer of cylindrically symmetrical geometry was used to carry out all the mass spectrometry detailed described in this thesis. A survey of the literature describing the development of matrix assisted laser desorption/ionization spectrometry and also the previous analysis of polymers by laser mass spectrometry was carried out. Experiments comparing the performance of the apparatus with published data on peptides and proteins were carried out, followed by experiments to assess the possibility of analyzing synthetic polymers. Initially polar polymers were investigated, since they could be anlayzed using sample preparations very similar to those developed for peptide and protein analysis. Later investigations were carried out on non-polar polymers such as polystyrene. The attachment of a range of transition metals to a low mass polystyrene was investigated using laser desorption/ionization time-of-flight mass spectrometry, without the use of matrices to increase the ion yield. Systematic investigations into the effects of sample spot composition, i.e. the amounts of matrix, polymer and salt present, were carried out, and used to suggest possible models for the processes leading to the generations of large gas phase ions. The effects of sample spot composition on the size and shape of the polymer molecular weight distributions obtained was also investigated. Liquid polymers such as polysiloxanes and perfluorinated polyethers were investigated using laser desorption/ionization and matrix assisted laser desorption/ionization. Carbon cluster generation from such polymers was investigated, and fullerene and polycyclic aromatic hydrocarbon analysis was also briefly studied. Novel new molecules such as aryl ester dendrimers were investigated, since they could not be successfully analyzed by other mass spectrometric techniques. Single molecular ions were obtained, helping to confirm the expected masses of these molecules. Novel new polymers such as hyperbranched aromatic polyesters were also analyzed, and molecular weight distributions were successfully obtained for a number of samples, showing the utility of MALDI for the analysis of new materials.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Gulko, Ilya Dmitrievich. "Ns Pulse / RF Hybrid Plasmas for Plasma Chemistry and Plasma Assisted Catalysis Applications." The Ohio State University, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=osu1598271986860656.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Aktaş, Oral Cenk [Verfasser]. "Functional applications of Al·Al2O3 nanowires : laser assisted α-Al2O3 synthesis and fabrication of micro-/nanostructured surfaces for cell compatibility studies / Oral Cenk Aktaş". 2009. http://d-nb.info/996646078/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Shih, Yung-Han, and 施詠漢. "Novel green research:1.Rapid synthesis of chromatographic stationary phases.2.Metal-organic frameworks as enzyme reactors and matrixes in surface assisted laser desorption/ionization." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/67dmp8.

Повний текст джерела
Анотація:
博士
中原大學
化學研究所
101
In this dissertation, development of novel synthesis approach and the application of porous metal-organic frameworks are the purposes based on green research. In the first part of this study, ionic liquid 1-hexyl-3-methylimidazolium tetrafluoroborate ([C6mim][BF4]) was used as reaction medium to prepare three common monolith materials including methacrylate ester-, styrene- and mixed methacrylate ester/styrene-based polymers either by water bath at 100℃or by microwave heating. Instead of volatile organic solvents, the usage of [C6mim][BF4] as reaction medium was more efficient for both reactions, the vinylization of column inner-wall and the monolith syntheses, which are the most time-consuming steps in conventional monolithic material preparation. When [C6mim][BF4] was used as reaction medium, the vinylization of fused silica capillary was achieved within 5 min, while ~20 h is required with conventional solvents (e.g. methanol). Furthermore, the reaction time for fabricating polymeric monolith was obviously reduced from 20 h (conventional method) to 5 min when IL solvent was used. In order to demonstrate the feasibility of these rapid synthetic methods, monoliths were employed as the separation columns for capillary electrochromatography (CEC) and nanoscale liquid chromatography/mass spectrometry (nano-LC/MS) in the separation of aromatic compounds, the qualitative and quantitative performances were comparable with the monoliths prepared by conventional approaches. In the second part of this study, dicyclohexylcarbodiimide was used to activate the free carboxylate groups on the metal-organic frameworks (MOFs) to an effective leaving group, and then reacted with trypsin via nucleophilic attack, finally the trypsin was immobilized onto MOFs (herein referred as trypsin-MOF) which was applied in protein digestion. The trypsin digested BSA peptides generated via the trypsin-MOFs reactors were analyzed by nano-LC/MS2 followed by the database searching for amino acids sequence coverage and matched peptides, confirmed the performance of these trypsin-MOFs. Based on the results, the amino acids sequence coverage and the number of matched peptides 69% and 41 for reusable trypsin-MIL-88B-NH2(Cr) under ultrasonic assisted digestion (2 min), which could be substituted for the traditional trypsin in-solution digestion (i.e. free trypsin with 18 h digestion). In contrast to the native MOFs using terephthalic acid (1,4-BDC) as ligands (MIL-101(Cr) and MIL-88B(Cr)), an amine-functionalized MOFs with NH2-1,4-BDC as ligand (MIL-88B-NH2(Cr)) exhibited increased efficiency for protein digestion ability possibly due to the increased hydrophilicity and better bio-compatibility which did not only reduce the undesired nonspecific adsorption of proteins also enhanced the enzyme immobilization and protein digestion efficiency. In the last part of this study, the cage-type (MIL-100(Fe), MIL-100(Cr), MIL-100(Al), MIL-101(Cr)) and the channel-type (DUT-4, DUT-5, CYCU-3) MOFs were chosen as matrixes in surface assisted laser desorption/ionization mass spectrometry (SALDI-MS) for analysis of polycyclic aromatic hydrocarbons (PAHs). In contrast to those PAHs using tradition organic matrix (α-cyano-4-hydroxycinnamic acid), background interference from the MOFs matrixes was very low or even disappeared for channel and cage MOFs, respectively. And the signal variance was the lowest when MIL-100(Fe) as matrix for analysis of PAHs, for example, the relative standard deviations (RSDs) of signal intensity with three replicated analyses were between 2.00%-16.33% for shot-to-shot assay. The results and the absence of background noises from the MS spectra suggested no ‘sweet spot’ problem resulted from the use of MIL-100(Fe) as matrix. Lastly, MIL-100(Fe) was used as solid-phase-extraction (SPE) adsorbent to trap trace-level PAHs (1 mg/L) in under ground water samples and as matrix for SALDI-MS analysis of PAHs in the same time. Hence, the limit of detection was lower from 1.16-11.41 ng/μL to 0.007-0.031 ng/μL without and with SPE, respectively.
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Laser-assisted synthesis"

1

Liang, Li, ed. MALDI mass spectrometry for synthetic polymers analysis. Hoboken: Wiley, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Lloyd, Paul Maxwell. Matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry of synthetic polymers. [s.l.]: typescript, 1998.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Laser-assisted synthesis"

1

Heszler, Peter, Lars Landström, and Claes-Göran Grangvist. "Basics of UV Laser-Assisted Generation of Nanoparticles." In Gas Phase Nanoparticle Synthesis, 69–122. Dordrecht: Springer Netherlands, 2004. http://dx.doi.org/10.1007/978-1-4020-2444-3_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Grübler, Gerald, Hartmut Echner, Wolfgang Voelter, and Stanka Stoeva. "Application of matrix-assisted laser desorption mass spectrometry in peptide sequencing and synthesis." In Peptides 1992, 445–46. Dordrecht: Springer Netherlands, 1993. http://dx.doi.org/10.1007/978-94-011-1470-7_195.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Wang, Y., L. Yurttas, B. E. Dale, D. H. Russell, G. R. Kinsel, L. M. Preston, M. S. Wright, and T. K. Hayes. "Matrix-Assisted Laser Desorption Mass Spectrometry To Monitor Synthesis And Folding of Manduca Sexta Eclosion Hormone And Its Analogs." In Peptides, 265–67. Dordrecht: Springer Netherlands, 1994. http://dx.doi.org/10.1007/978-94-011-0683-2_86.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Palani, I. A., D. Nakamura, K. Okazaki, M. Highasiata, and T. Okada. "Influence of Sb as a Catalyst in Synthesize of Sb Doped ZnO Nanostructures Using Nanoparticle Assisted Pulsed Laser Deposition for UV LED Applications." In ZnO Nanocrystals and Allied Materials, 175–94. New Delhi: Springer India, 2013. http://dx.doi.org/10.1007/978-81-322-1160-0_8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Aithal, Shashi, and Vish Subramaniam. "Laser-Assisted and Optical Pumping Techniques for Diamond Synthesis." In Diamond Films Handbook. CRC Press, 2002. http://dx.doi.org/10.1201/9780203910603.ch9.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Tarasenka, N. N., A. A. Nevar, A. V. Butsen, N. V. Tarasenko, and V. A. Lapina. "LUMINESCENT CARBON NANODOTS FABRICATED BY LASER ASSISTED SYNTHESIS IN LIQUIDS." In Physics, Chemistry and Application of Nanostructures, 228–31. WORLD SCIENTIFIC, 2017. http://dx.doi.org/10.1142/9789813224537_0053.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Marganakop, Sheetal, Pramod Kattimani, Sudha Belgur Satyanarayana, and Ravindra Kamble. "Microwave Synthesized Functional Dyes." In Microwave Heating - Electromagnetic Fields Causing Thermal and Non-Thermal Effects. IntechOpen, 2021. http://dx.doi.org/10.5772/intechopen.94946.

Повний текст джерела
Анотація:
Microwave chemistry involves the application of microwave radiation to chemical reactions and has played an important role in organic synthesis. Functional dyes are those with hi-tech applications and this chapter attempts to provide an overview of the recent developments in microwave-assisted synthesis of functional dyes. Emphasis has been paid to the microwave-assisted synthesis of dye molecules which are useful in hi-tech applications such as optoelectronics (dye-sensitized solar cells), photochromic materials, liquid crystal displays, newer emissive displays (organic-light emitting devices), electronic materials (organic semiconductors), imaging technologies (electrophotography viz., photocopying and laser printing), biomedical applications (fluorescent sensors and anticancer treatment such as photodynamic therapy). In this chapter, the advantages of microwaves as a source of energy for heating synthesis reactions have been demonstrated. The use of microwaves to functional dyes is a paradigm shift in dye chemistry. Until recently most academic laboratories did not practice this technique in the synthesis of such functional dyes but many reports are being appeared in the journals of high repute.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Rana, G. "Recent Advances in Processing of Hard Ferrites." In Materials Research Foundations, 35–65. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902318-2.

Повний текст джерела
Анотація:
We plan to discuss possible fabrication approaches for hard ferrites, which are well-known for their vast range of applications and uses. We've covered all six varieties of hexagonal ferrites in this chapter: M-type, Z-type, Y-type, W-type, X-type, and U-type hexa-ferrites. Hexaferrites are ferromagnetic materials, and their properties are entirely determined by the intrinsic structure of ferrites. The numerous synthesis procedures for hard ferrite nanoparticles are the focus of this chapter. This chapter describes in detail the different processes for preparing hard ferrites, including examples, advantages, and limitations. Solid-state, combustion, hydrothermal, microemulsion, solvothermal, solution combustion, biosynthetic approach, microwave-assisted combustion, sol–gel, co–precipitation, or laser pyrolysis, sonochemical, thermal decomposition, and reverse micelle processes are briefly explained. The influence of synthesis procedures on the characteristics of ferrites in nanoform is summarised in this chapter.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Emmett, Stevan R., Nicola Hill, and Federico Dajas-Bailador. "Infectious disease." In Clinical Pharmacology for Prescribing. Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780199694938.003.0019.

Повний текст джерела
Анотація:
Antibiotics include an extensive range of agents able to kill or prevent reproduction of bacteria in the body, without being overly toxic to the patient. Traditionally derived from living organisms, most are now chemically synthesized and act to disrupt the integrity of the bacterial cell wall, or penetrate the cell and disrupt protein synthesis or nucleic acid replication. Typically, bacteria are identified according to their ap­pearance under the microscope depending on shape and response to the Gram stain test. Further identification is obtained by growth characteristics on various types of culture media, based on broth or agar, biochemical and immunological profiles. Further testing on broth or agar determines antibiotic sensitivity to guide on anti­biotic therapy in individual patients. This process can take 24– 48 hours to culture and a further 24– 48 hours to measure sensitivities. Increasingly, new technology, e.g. Matrix Assisted Laser Desorption Ionization— Time of Flight (MALDI- TOF) and nucleic acid amplification as­says, are being used to provide more rapid identification. The Gram classification, however, is still widely referred to as it differentiates bacteria by the presence or absence of the outer lipid membrane (see Figure 11.1), a fundamental characteristic that influences antibiotic management. Antimicrobial agents rely on selective action exploiting genetic differences between bacterial and eukaryotic cells. They target bacterial cell wall synthesis, bacterial protein synthesis, microbial DNA or RNA synthesis, by acting on bacterial cell metabolic pathways or by inhibiting the ac­tion of a bacterial toxin (see Table 11.1). Both Gram- positive and Gram- negative bacteria possess a rigid cell wall able to protect the bacteria from varying osmotic pressures (Figure 11.1). Peptidoglycan gives the cell wall its rigidity and is composed of a glycan chain of complex alternating carbohydrates, N- acetylglucosamide (N- ATG), and N- acetylmurcarinic acid (N- ATM), that are cross- linked by peptide (or glycine) chains. In Gram-positive bacteria, the cell wall contains multiple peptido­glycan layers, interspersed with teichoic acids, whereas Gram- negative bacteria contain only one or two peptido­glycan layers that are surrounded by an outer membrane attached by lipoproteins. The outer membrane contains porins (which regulate transport of substances into and out of the cell), lipopolysaccharides, and outer proteins in a phospholipid bilayer. For both Gram- negative and Gram-positive bacteria, peptidoglycan synthesis involves about 30 bacterial enzymes acting over three stages. Since the cell wall is unique to bacteria, it makes a suitable target for antibiotic therapy.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Kim, Ig-Hyeon, Seon-Hyo Kim, and Kyoo-Young Kim. "Synthesis of AlN Thin Film by Ion Beam Assisted Sputter Deposition." In Laser and Ion Beam Modification of Materials, 447–50. Elsevier, 1994. http://dx.doi.org/10.1016/b978-0-444-81994-9.50094-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Laser-assisted synthesis"

1

Yakovlev, A. G., and Vadim P. Veiko. "New schematic decisions and materials for 3D laser synthesis." In Laser-Assisted Microtechnology 2000, edited by Vadim P. Veiko. SPIE, 2001. http://dx.doi.org/10.1117/12.413748.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Ren, ZhongMin, Yongfeng Lu, and Z. F. He. "Progress in carbon nitride synthesis by pulsed-laser deposition." In Laser-Assisted Microtechnology 2000, edited by Vadim P. Veiko. SPIE, 2001. http://dx.doi.org/10.1117/12.413764.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Mulenko, Sergey A., Michail M. Nishchenkko, and Nikolai T. Gorbachuk. "Laser synthesis of disilicides based on iron and their application for photothermal tensoconverters." In Laser-Assisted Microtechnology 2000, edited by Vadim P. Veiko. SPIE, 2001. http://dx.doi.org/10.1117/12.413766.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Tyurnina, Anastasiya E., Vladimir Y. Shur, Roman V. Kozin, Dmitry K. Kuznetsov, and Evgeny A. Mingaliev. "Synthesis of stable silver colloids by laser ablation in water." In Fundamentals of Laser Assisted Micro- and Nanotechnologies 2013, edited by Vadim P. Veiko and Tigran A. Vartanyan. SPIE, 2013. http://dx.doi.org/10.1117/12.2053557.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Nakamura, D., T. Okada, and K. Sakai. "Synthesis and optical property of nanostructured ZnO crystals by nanoparticle-assisted pulsed laser deposition." In Fundamentals of Laser Assisted Micro- and Nanotechnologies 2010, edited by Vadim P. Veiko and Tigran A. Vartanyan. SPIE, 2010. http://dx.doi.org/10.1117/12.887240.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Han, Y. X., H. Ling, and Y. F. Lu. "Laser-assisted combustion-flame synthesis of diamond films." In ICALEO® 2006: 25th International Congress on Laser Materials Processing and Laser Microfabrication. Laser Institute of America, 2006. http://dx.doi.org/10.2351/1.5060865.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Migulin, V. V., Victor G. Ralchenko, and Y. J. Baik. "Oxygen-assisted laser cutting and drilling of CVD diamond." In Lasers in Synthesis, Characterization, and Processing of Diamond, edited by Vitali I. Konov and Victor G. Ralchenko. SPIE, 1998. http://dx.doi.org/10.1117/12.328205.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Veiko, Vadim P., Sergei A. Rodionov, Boris P. Timofeev, Evgeny B. Yakovlev, Alexander T. Shakola, Dmitry L. Goobanov, Alexei K. Kromin, and Jian Wu. "Laser-assisted 3D-LOM systems: analysis and synthesis." In Photonics West '96, edited by Jan J. Dubowski, Jyotirmoy Mazumder, Leonard R. Migliore, Chandrasekhar Roychoudhuri, and Ronald D. Schaeffer. SPIE, 1996. http://dx.doi.org/10.1117/12.237747.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Gonglewski, J. D., and D. C. Dayton. "Guidestar-Assisted Wavefront Sensor Speckle Holography: Postdetection Distortion Compensation using a Laser Guidestar Reference." In Signal Recovery and Synthesis. Washington, D.C.: Optica Publishing Group, 1992. http://dx.doi.org/10.1364/srs.1992.wa4.

Повний текст джерела
Анотація:
The idea that a distorted signal may be corrected after detection by an independent distortion estimate has long been known.1,2 Currently, several researchers are investigating the application of this concept to obtaining high resolution images of astronomical objects through the atmosphere.3-5 In this case, both a (short-exposure) distorted image and a distortion estimate are formed simultaneously from the object's light. Thus pairs of independent image-distortion data are used to form the final image through deconvolution and averaging. We call our configuration of this setup Wavefront Sensor Speckle Holography (WSSH).5 This paper explores the addition of an artificial reference in the form of a laser guidestar to such a distortion-estimating imaging system6. This will improve distortion estimation and imaging system performance. See figure 1.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Mulenko, S. A. "Synthesis of nanometric iron and chromium oxide films by reactive pulsed laser deposition for photo-thermo sensors." In Fundamentals of Laser Assisted Micro- and Nanotechnologies 2010, edited by Vadim P. Veiko and Tigran A. Vartanyan. SPIE, 2010. http://dx.doi.org/10.1117/12.889166.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Laser-assisted synthesis" для конкретних типів джерел:
Статті в журналах
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії