Добірка наукової літератури з теми "IR-REFLECTIVE"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "IR-REFLECTIVE".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "IR-REFLECTIVE"

1

Lee, Hyung-Joo, Jin-Young Park, Lee-Ku Kwac, and Jongsu Lee. "Improved Optical Efficiency of 850-nm Infrared Light-Emitting Diode with Reflective Transparent Structure." Micromachines 14, no. 8 (August 12, 2023): 1586. http://dx.doi.org/10.3390/mi14081586.

Повний текст джерела
Анотація:
This study investigated a reflective transparent structure to improve the optical efficiency of 850 nm infrared light-emitting diodes (IR-LEDs), by effectively enhancing the number of extracted photons emitted from the active region. The reflective transparent structure was fabricated by combining transparent epitaxial and reflective bonding structures. The transparent epitaxial structure was grown by the liquid-phase epitaxy method, which efficiently extracted photons emitted from the active area in IR-LEDs, both in the vertical and horizontal directions. Furthermore, a reflective bonding structure was fabricated using an omnidirectional reflector and a eutectic metal, which efficiently reflected the photons emitted downwards from the active area in an upward direction. To evaluate reflective transparent IR-LED efficiency, a conventional absorbing substrate infrared light-emitting diode (AS IR-LED) and a transparent substrate infrared light-emitting diode (TS IR-LED) were fabricated, and their characteristics were analyzed. Based on the power–current (L-I) evaluation results, the output power (212 mW) of the 850 nm IR-LED with the reflective transparent structure increased by 76% and 26%, relative to those of the AS IR-LED (121 mW) and TS IR-LED (169 mW), respectively. Furthermore, the reflective transparent structure possesses both transparent and reflective properties, as confirmed by photometric and radial theta measurements. Therefore, light photons emitted from the active area of the 850 nm IR-LED were efficiently extracted upward and sideways, because of the reflective transparent structure.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Thongkanluang, Thadsanee, Pichet Limsuwan, and P. Rakkwamsuk. "Preparation of IR Reflective Green Pigment." Advanced Materials Research 55-57 (August 2008): 805–8. http://dx.doi.org/10.4028/www.scientific.net/amr.55-57.805.

Повний текст джерела
Анотація:
This research article reports a development on green pigments having high reflectance of NIR radiation from the sun. The aim of the development is to use the green pigments as a component of building paint to reduce heat penetrating into the building. Cr2O3, a green pigment oxide, was used as the host component and the mixtures of Al2O3, V2O5 and TiO2 were used as the guest components. Al2O3, V2O5 and TiO2 were mixed at different 36 compositions according to triaxial diagram. For each sample preparation, 80% wt Cr2O3 was mixed with 20%wt of guest component for each composition. Then the mixed sample were calcined at 1150 °C for 4 hours and were ground with an agate ball mill for 7 minutes at a speed of 250 rev/min. Finally, the pigments were sieved to obtain the particle sizes of 0.5 - 2.0 µm. The pigment powders were compressed in a mold to get samples in the form of thin disks, each one with a diameter of 2.7 cm and a thickness of 4 mm. The reflectance for all samples was measured using a spectrophotometer in the wavelength ranging from 300 – 2100 nm in accordance with ASTM E891. It was found that the maximum reflectance, in the wavelengths ranging from 780 – 2100 nm, of 82.83% was obtained from the sample with a composition of 80%Cr2O3, 14%Al2O3, 4%TiO2 and 2% V2O5.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Lee, Hyung-Joo, Jae-Sam Shim, Jin-Young Park, Lee-Ku Kwac, and Chang-Ho Seo. "Study on P-AlGaAs/Al/Au Ohmic Contact Characteristics for Improving Optoelectronic Response of Infrared Light-Emitting Device." Micromachines 14, no. 5 (May 16, 2023): 1053. http://dx.doi.org/10.3390/mi14051053.

Повний текст джерела
Анотація:
The Al/Au alloy was investigated to improve the ohmic characteristic and light efficiency of reflective infrared light-emitting diodes (IR-LEDs). The Al/Au alloy, which was fabricated by combining 10% aluminum and 90% gold, led to considerably improved conductivity on the top layer of p-AlGaAs of the reflective IR-LEDs. In the wafer bond process required for fabricating the reflective IR-LED, the Al/Au alloy, which has filled the hole patterns in Si3N4 film, was used for improving the reflectivity of the Ag reflector and was bonded directly to the top layer of p-AlGaAs on the epitaxial wafer. Based on current-voltage measurements, it was found that the Al/Au alloyed material has a distinct ohmic characteristic pertaining to the p-AlGaAs layer compared with those of the Au/Be alloy material. Therefore, the Al/Au alloy may constitute one of the favored approaches for overcoming the insulative reflective structures of reflective IR-LEDs. For a current density of 200 mA, a lower forward voltage (1.56 V) was observed from the wafer bond IR-LED chip made with the Al/Au alloy; this voltage was remarkably lower in value than that of the conventional chip made with the Au/Be metal (2.29 V). A higher output power (182 mW) was observed from the reflective IR-LEDs made with the Al/Au alloy, thus displaying an increase of 64% compared with those made with the Au/Be alloy (111 mW).
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kwon, Myon-Joo, Young-Woong Do, and Jin-Wook Ha. "Development of IR Reflective Cool Pigment and Paint." Journal of the Korea Academia-Industrial cooperation Society 13, no. 8 (August 31, 2012): 3800–3805. http://dx.doi.org/10.5762/kais.2012.13.8.3800.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Perjalian, Sara. "Investigation of IR Reflective Coating for Plexiglas Canopy." European Journal of Technology 7, no. 2 (July 16, 2023): 50–69. http://dx.doi.org/10.47672/ejt.1532.

Повний текст джерела
Анотація:
Purpose: Solar energy is necessary for our global ecosystem. In certain times and parts of the world, the heat generated from the energy of the Sun becomes uncomfortable for us and we need to use additional energy to cool down the generated heat from the Sun. This additional energy usage is detrimental to our environment due to generation of air pollution and use of our natural energy resources. The purpose of this paper is to investigate prevention of undesired generation of heat by the Sun using reflective coating materials. Methodology: In this study, using literature review, Ga doped Zinc Oxide (GZO) is theoretically investigated as a visible light transparent and infrared reflective coating material for the Plexiglas canopy of a solar car. The effect of doping concentration and film thickness is reviewed and discussed. Indium Tin Oxide (ITO) is also studied, using various literature reviews, as an infrared reflective coating material that is transparent in the visible light region. Finally, a spectrophotometer was used to examine the optical properties of a Plexiglas, slide glass, and ITO coated glass, and the results of UV and visible light transmittance measurement of the three materials is presented and discussed. Findings: GZO and ITO films both have high transparency in the visible region of the solar spectrum and high reflectivity to IR radiation starting from 1500 nm to higher wavelengths. None of these films completely reflect the IR radiation with wavelengths in the range of 700 nm to 1500 nm which contribute to generation of heat most. Many factors such as doping concentration and thickness of the films affect reflectivity of the films due to their effect on shifting the plasma frequency. Increasing doping concentration and thickness of the GZO films until a certain threshold improves IR reflectivity of GZO films, but it was not possible to precisely formulate these factors within this study. Reducing the particle size in nanoparticle ITO film improves transmittance of the film in the visible light region and its reflectance in the IR region. The measurement results showed that Plexiglas and glass have a high transparency to visible and near IR radiation. Recommendations: Further investigation and experimentation is recommended to fully understand and formulate doping concentration and film thickness of GZO and ITO to achieve optimal IR reflectivity within the 700 to 1500 nm wavelength region while maintaining visible light transparency. In regards to ITO coating, reduced nanoparticle size is recommended to improve the desired visible and IR transparency and reflectivity of the film. Although GZO and ITO coatings’ doping concentration and thickness to achieve IR reflectivity within the 700 to 1500 nm wavelengths is not well understood in this study, to reduce heat generation they are still recommended as a coating material due to their reflectivity to IR with wavelengths of above 1500 nm which also play a role in generation of heat.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sha, Baoning, and Shengyao Zhao. "Dichroism Infrared-reflective Thermochromic Ink of Mobile Terminals’ Recognition." MATEC Web of Conferences 221 (2018): 01011. http://dx.doi.org/10.1051/matecconf/201822101011.

Повний текст джерела
Анотація:
The decoration of thermochromic ink has applications ranging from engineering devices to liquid sensors. However, when it comes to accurate computer identification the characteristic as dichroism is not fully used. Thus, we have recently proposed a manufacture method of dichroism infrared-reflective thermochromic ink. (DITI). By rubbing to heat DITI coated layer, this method enables us to finely and separately create dichroism manuscript after the handwriting is complete. Moreover, the microcapsules have cheerful compatibility. We have decorated conventional microcapsules with bola-type copolymer which allow us to fill them with Infrared (IR) reflective perssad. We consider this method promising to distinguish dichroism printing or writing on a tanglesome surface much quicker, for the IR reflective low-colour-density layer will be easily locked by an IR camera or a mobile phone camera to adjust specific characters of interest. We anticipate that this DITI ink will find use in markable temperature measurement, fluid machinery, anti-counterfeiting techniques and daily printing or writing.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

van Heeswijk, Ellen P. A., Joey J. H. Kloos, Nadia Grossiord, and Albertus P. H. J. Schenning. "Humidity-gated, temperature-responsive photonic infrared reflective broadband coatings." Journal of Materials Chemistry A 7, no. 11 (2019): 6113–19. http://dx.doi.org/10.1039/c9ta00993k.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Sarov, Y., V. Sarova, I. Capek, and I. Rangelow. "Near-IR micro-fluidic sensing by total internal reflective diffraction." Journal of Physics: Conference Series 253 (November 1, 2010): 012051. http://dx.doi.org/10.1088/1742-6596/253/1/012051.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Shuyi, Gan, Hong Yilin, Xu Xiangdong, Liu Yin, Zhou Hongjun, Huo Tonglin, and Fu Shaojun. "Reflective performance of Ir film in vacuum ultraviolet wavelength region." Applied Optics 47, no. 18 (June 18, 2008): 3364. http://dx.doi.org/10.1364/ao.47.003364.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Soumya, S., S. Nishanth Kumar, A. Peer Mohamed, and S. Ananthakumar. "Silanated nano ZnO hybrid embedded PMMA polymer coatings on cotton fabrics for near-IR reflective, antifungal cool-textiles." New Journal of Chemistry 40, no. 8 (2016): 7210–21. http://dx.doi.org/10.1039/c6nj00353b.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Дисертації з теми "IR-REFLECTIVE"

1

Smith, Bruce W. "Optically transparent IR reflective heat mirror films of ZNS-AG-ZNS /." Online version of thesis, 1989. http://hdl.handle.net/1850/11360.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Aziz, Azaam, Mariana Medina-Sánchez, Nektarios Koukourakis, Jiawei Wang, Robert Kuschmierz, Hannes Radner, Jürgen W. Czarske, and Oliver G. Schmidt. "Real-Time IR Tracking of Single Reflective Micromotors through Scattering Tissues." Wiley-VCH, 2019. https://slub.qucosa.de/id/qucosa%3A75413.

Повний текст джерела
Анотація:
Medical micromotors have the potential to lead to a paradigm shift in future biomedicine, as they may perform active drug delivery, microsurgery, tissue engineering, or assisted fertilization in a minimally invasive manner. However, the translation to clinical treatment is challenging, as many applications of single or few micromotors require real-time tracking and control at high spatiotemporal resolution in deep tissue. Although optical techniques are a popular choice for this task, absorption and strong light scattering lead to a pronounced decrease of the signal-to-noise ratio with increasing penetration depth. Here, a highly reflective micromotor is introduced which reflects more than tenfold the light intensity of simple gold particles and can be precisely navigated by external magnetic fields. A customized optical IR imaging setup and an image correlation technique are implemented to track single micromotors in real-time and label-free underneath phantom and ex vivo mouse skull tissues. As a potential application, the micromotors speed is recorded when moving through different viscous fluids to determine the viscosity of diverse physiological fluids toward remote cardiovascular disease diagnosis. Moreover, the micromotors are loaded with a model drug to demonstrate their cargotransport capability. The proposed reflective micromotor is suitable as theranostic tool for sub-skin or organ-on-a-chip applications.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Le, Gall Stephen. "Peau active pour le camouflage dans le visible et l'infrarouge utilisant les cristaux liquides cholestériques." Thesis, Ecole nationale supérieure Mines-Télécom Atlantique Bretagne Pays de la Loire, 2018. http://www.theses.fr/2018IMTA0097.

Повний текст джерела
Анотація:
L’objectif de cette thèse est de réaliser une peau active pour le camouflage de véhicule terrestre à base de la technologie cristal liquide cholestérique. Après analyse de l’environnement, une texture est appliquée sur les écrans cristaux liquides afin de réduire la signature visuelle et thermique du véhicule. Les travaux ont consisté à proposer un dispositif trichrome cristal liquide permettant d’obtenir la colorimétrie définie par le cahier des charges. Les problèmes de tenue en température, de réflexion spéculaire, de niveaux de gris, niveaux de réflectivité, de réduction des tensions appliquées ont été traités au cours de cette thèse. La technologie proposée a permis la réalisation d’un démonstrateur sur un robot télécommandé qui a été présenté au salon Eurosatory 2018 sur le stand du ministère des armées. Des travaux ont été également engagés pour le développement de modulateur optique dans l’infrarouge, à base de cristaux liquides cholestérique, afin de moduler la réflectivité et donc de pouvoir limiter la signature thermique du véhicule. Plusieurs pistes ont été testées et proposées
The objective of this thesis is to achieve an active skin for the camouflage of a land vehicle based on cholesteric liquid crystal technology. After analysis of the environment, a texture is applied on the LCDs to reduce the visual and thermal signature of the vehicle. The work consisted of proposing a trichrome liquid crystal device to obtain the colorimetry defined by the specifications. The problems of temperature resistance, specular reflection, gray scale, reflectivity levels, reduction of applied voltages were discussed during this thesis. The proposed technology enabled to realization of a demonstrator on a remote controlledrobot that was presented at Eurosatory 2018 on the stand of the Ministry of the Armed Forces. Work has also been started on the development of optical modulators in the infrared, based on cholesteric liquid crystals, in order to modulate the reflectivity and thus to be able to limit the thermal signature of the vehicle. Several tracks have been tested and proposed
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Dzičkovskaja, Beata. "Refleksyviojo mokymo principų realizavimas teisinio ugdymo pamokose." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2011. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2011~D_20110705_130046-61352.

Повний текст джерела
Анотація:
Teisinis ugdymas yra reikšmingas bei būtinas elementas, kad visuomenė išauklėtų teisingą, moralų, pareigingą ir dorovingą ţmogų. Ţmogus galės visapusiškai išreikšti save kaip dorovingą pilietį tik tada, kai jis ţinos ne tik savo teises ir pareigas, bet kartu supras ir gerbs įstatymus, kitų ţmonių teises ir laisves. Mokykla ir yra ta institucija, kuri padės įgyti pagrindinių teisinių ţinių. Tačiau, kad minėta įstaiga išugdytų dorovingą pilietį vien ţinių perteikimo nepakanka. Todėl būtina teisinio ugdymo pamokose įgyvendinti, realizuoti refleksyvųjį mokymą, kuris gali padėti pasiekti kokybiškesnių mokymo rezultatų įsigilinant ne tik į perteikiamas ţinias, bet ir į save, į savo jausmus, stebint savo veiklą, pasiekimus. Todėl refleksyviojo mokymo principų realizavimas teisinio ugdymo pamokose yra aktuali tema. Paţymėtina, refleksyvus mokymas yra plačiai tirtas suagusiųjų mokyme. Tačiau kaip refleksyvus mokymas gali būti realizuojamas bendrojo lavinimo mokyklose, teisinio ugdymo pamokose nėra tirta. Darbo tema bei tyrimo objektas – refleksyviojo mokymo principų realizavimas teisinio ugdymo pamokose bei tuose dėstomuose dalykuose, kuriuose integruojamos teisinio ugdymo atskiros temos. Darbo tikslas – ištirti refleksyviojo mokymo principų realizavimą teisinio ugdymo pamokose bei tuose dėstomuose dalykuose, kuriuose integruojamos teisinio ugdymo atskiros temos. Atsiţvelgiant į darbo tikslą, formuluojama hipotezė – refleksyviojo mokymo principų realizavimas teisinio ugdymo pamokose... [toliau žr. visą tekstą]
Legal education is a significant and essential element in order the society would bring up a fair, moral, responsible and truthful person. A person will be able to comprehensively express oneself as a moral citizen only when one will know not only one‟s rights and duties, but also will understand and respect laws, rights and freedoms of other people. School is such an institution, which will help to acquire the main legal knowledge. However, just imparting the knowledge is not enough for the mentioned institution to raise a moral citizen. Therefore, during legal education lessons it is essential to implement, realize reflective teaching, which may help to reach more qualitative teaching results, seeing not only into the imparted knowledge, but also to oneself, one‟s feelings, observing one‟s activity and strides. Consequently, realization of reflective teaching principles in legal education lessons is a relevant topic. It should be noted that reflective teaching has been widely studied in adult education. However, it has not been studied yet how reflective teaching may be realized in general education schools, legal education lessons. The subject of the thesis and the research object is realization of reflective teaching principles in legal education lessons. The aim of the thesis is to analyze realization of reflective teaching principles in legal education lessons. In consideration of the aim of the thesis the hypothesis has been formulated – realization of reflective... [to full text]
Стилі APA, Harvard, Vancouver, ISO та ін.
5

JINDAL, NEERAJ. "STUDY OF PIGMENTS ON PVC ARTIFICIAL LEATHER CLOTHS." Thesis, 2016. http://dspace.dtu.ac.in:8080/jspui/handle/repository/14451.

Повний текст джерела
Анотація:
The formulation of IR-reflective coatings for various applications depends on many factors, some of which cannot be seen with the naked eye. There are two main keys to formulating these coatings. 1. Individual pigment selection: Select IR-reflective pigments. 2. Milling and dispersing: Do not over grind and degrade IR properties. 3. Mixing IR-reflective pigments: Be aware of the invisible interactions of different pigment types in the IR region. 4. Opacity: Use an IR-reflective substrate/primer if possible, or manage the pigmentto- binder and film thickness to minimize effect of absorptive substrates. 5. Contamination: Inclusion of even small amounts of IR-absorbing pigments can greatly reduce TSR. The second key is to work with a partner with the products, research, and most importantly, technical support to allow you to formulate, test and validate your IRreflective coatings. The IR range is invisible to the human eye, not covered by standard spectrophotometers, and measurable only by expensive and specialized equipment. A partner who can shepherd you in pigment selection, color matching and testing, along with guidance in the different regulations and programs can be an invaluable aid in formulating, marketing and supporting differentiated IR-reflective coatings.
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "IR-REFLECTIVE"

1

Barkin, J. Samuel, and Laura Sjoberg. International Relations' Last Synthesis? Oxford University Press, 2019. http://dx.doi.org/10.1093/oso/9780190463427.001.0001.

Повний текст джерела
Анотація:
Many scholars, intentionally or unintentionally, have entangled constructivisms and critical theories in problematic ways, either by assigning a critical-theoretical politics to constructivisms or by assuming the appropriateness of constructivist epistemology and methods for critical theorizing. This book makes the argument that these connections mirror the grand theoretical syntheses of International Relations (IR) in the 1980s and 1990s, and have similar constraining effects on the possibilities of International Relations theory. These connections have been made without adequate reflection, in contradiction to the base assumptions of each theoretical perspective, and to the detriment of both knowledge accumulation about global politics and theoretical rigor in disciplinary International Relations. It is not that constructivisms and critical theories have no common ground but instead that the overstatement of their common ground that has become routine among International Relations scholars is counterproductive to the discovery and utilization of their potential dialogues. To that end, this book argues that scholars using the two in conjunction should be cognizant of, rather than gloss over, the tensions between them as approaches and the different tools they have to offer. Along these lines, the book uses the concept of affordances to look at what each has to offer the other, and to argue for a modest, reflective, specified return to (constructivist and critical) International Relations theorizing that has the potential to revive International Relations theorizing by rejecting its oversimple syntheses.
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "IR-REFLECTIVE"

1

"5 Debating the Chinese School of IR: a reflective review from." In Constructing a Chinese School of International Relations, 91–107. Abingdon, Oxon ; New York, NY : Routledge, 2016. |: Routledge, 2016. http://dx.doi.org/10.4324/9781315692432-12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Kurki, Milja. "Conclusion." In International Relations in a Relational Universe, 191–200. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198850885.003.0009.

Повний текст джерела
Анотація:
This chapter summarizes the aims and conclusions of the work. In addition, this concluding chapter sets out five ‘light’ challenges, and related propositions, for development of IR theory, propositions reflective of the sensibility relational cosmology, as translated here via critical humanism, might direct us to adopt. Many challenges remain, but we should not feel weighed down by them but explore new ways of thinking, being, and becoming as we ‘loosen’ ourselves into the ‘mesh’ and the complex negotiations of human and non-human relations residing there requires. IR of the future will likely be more open, more interdisciplinary, and hopefully more cosmologically aware, and it has the opportunity to develop new ways of thinking and doing co-existence and politics.
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "IR-REFLECTIVE"

1

Rich, Chris C., George J. Vendura, Jr., and Joel M. Petersen. "Volume IR reflective gratings." In OE/LASE '90, 14-19 Jan., Los Angeles, CA, edited by Stephen A. Benton. SPIE, 1990. http://dx.doi.org/10.1117/12.17989.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Vandormael, D., S. Habraken, J. Loicq, C. Lenaerts, and D. Mawet. "Anti-reflective sub-wavelength patterning of IR optics." In Optics/Photonics in Security and Defence, edited by Ronald G. Driggers and David A. Huckridge. SPIE, 2006. http://dx.doi.org/10.1117/12.692449.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Galvis, Alex, David J. Russomanno, and Cartik R. Kothari. "A wireless near-IR retro-reflective profiling sensor." In SPIE Defense, Security, and Sensing. SPIE, 2012. http://dx.doi.org/10.1117/12.918596.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Do-Hoon Kwon, Xiande Wang, Z. Bayraktar, B. Weiner, and D. H. Werner. "Reconfigurable transmissive/reflective metamaterial slab in the near IR." In 2008 IEEE Antennas and Propagation Society International Symposium and USNC/URSI National Radio Science Meeting. IEEE, 2008. http://dx.doi.org/10.1109/aps.2008.4619737.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Jyoti, Oishi, Md Abu Ismail Siddique, Md Samiul Habib, and S. M. Abdur Razzak. "Analysis of a Metamaterial based Reflective Filter at Mid-IR frequencies." In 2022 12th International Conference on Electrical and Computer Engineering (ICECE). IEEE, 2022. http://dx.doi.org/10.1109/icece57408.2022.10088676.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Wang, Jue, Gary A. Hart, Jean Francois Oudard, Leonard Wamboldt, and Brian P. Roy. "HfO2/SiO2multilayer based reflective and transmissive optics from the IR to the UV." In SPIE Defense + Security, edited by Jay N. Vizgaitis, Bjørn F. Andresen, Peter L. Marasco, Jasbinder S. Sanghera, and Miguel P. Snyder. SPIE, 2016. http://dx.doi.org/10.1117/12.2219752.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Nakazato, Yusuke, Masayuki Kanbara, and Naokazu Yokoya. "Localization of wearable users using invisible retro-reflective markers and an IR camera." In Electronic Imaging 2005, edited by Andrew J. Woods, Mark T. Bolas, John O. Merritt, and Ian E. McDowall. SPIE, 2005. http://dx.doi.org/10.1117/12.586382.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Wang, Sishun, Chang Liu, Dong Wei, Zhaowei Xin, Mingce Chen, Xinyu Zhang, Haiwei Wang, and Changsheng Xie. "IR reflective characteristics of a periodic nano-pattern array shaped in a metallic film." In CIOP100, edited by Yue Yang. SPIE, 2018. http://dx.doi.org/10.1117/12.2505586.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Bryant, Paul T., Jack Grigor, Stephen W. McHugh, and Steve White. "Performance comparison of reflective and emissive target projector systems for high-performance IR sensors." In AeroSense 2003, edited by Gerald C. Holst. SPIE, 2003. http://dx.doi.org/10.1117/12.498114.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Javed, Asfa, Hassan Tariq, and Abdullah Khalid. "Implementation of IR sensors in thru-beam and diffuse-reflective modes for obstacle detection." In 2017 International Symposium on Wireless Systems and Networks (ISWSN). IEEE, 2017. http://dx.doi.org/10.1109/iswsn.2017.8250013.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії