Дисертації з теми "Interactive prototype design"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Interactive prototype design".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Kobets-Singkh, Olena. "Two mountain huts : architecture of interactive environments through the development of the prototype." Virtual Press, 2008. http://liblink.bsu.edu/uhtbin/catkey/1390312.
Повний текст джерелаDepartment of Architecture
Melander, Emma. "Applied VMS to handle mathematical misconception in algebra : Metacognition through interactive visualisation prototype." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-132316.
Повний текст джерелаSvensk undervisning är i behov att förändras för att vända den negativa trenden i PISA och TIMSS. Samtidigt är digitala artefakter alltmer närvarande i klassrummet och kommersiella applikationer alltmer tillgängliga. Det är svårt att avgöra vilka tekniska verktyg som ger faktiska resultat och det är ännu inte klarlagt vilken roll tekniken bör spela i en klassrumssituation. I detta arbete undersöks hur visualiseringar och teknik kan användas för att främja djupare förståelse inom algebra genom att adressera missuppfattningar som ofta förekommer hos elever. Observation och intervjuer genomfördes med elever på två skolor, en i Norrköping och en i Östersund. Teori om algebraiska missuppfattningar har studerats och sammanställts i två kategorier. Dessutom har tre prototyper utvecklats tillsammans med, och utvärderats av, en fokusgrupp. Arbetet har resulterat i förslag på vad tekniska och interaktiva aktiviteter skulle kunna innebära i algebraisk matematikundervisning. Det visar att mer forskning behövs för att avgöra hur teknik på bästa sätt kan implementeras och utnyttjas effektivt inom undervisning. Arbetet visar också att sådan forskning och utveckling behöver genomföras med en användarcentrerad ansats med delaktighet från berörda målgrupper.
Major, William M. "Design and implementation of a prototype PC based graphical and interactive MILSATCOM requirements database system." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1993. http://handle.dtic.mil/100.2/ADA272960.
Повний текст джерелаThesis advisor(s): Kamel, Magdi N. ; Dolk, Daniel R. "June 1993." Includes bibliographical references. Also available online.
Chau, Katie. "Architecture + hypermedia, a didactic approach to exploring architecture as both content and method in a hypermedia environment; prototype project, an interactive multimedia CD-ROM on exploring sacred Tibetan architecture." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape2/PQDD_0021/MQ54234.pdf.
Повний текст джерелаAxelsson, Alfred. "Designing for usability of 3D configuration in E-commerce : Interactive design of 3D in web applications." Thesis, Linköpings universitet, Interaktiva och kognitiva system, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-139152.
Повний текст джерелаAnjum, Ali. "Virtual size measurement for garments and fashion industry : Selection of right size at the online fashion buyers." Thesis, Södertörn University College, School of Communication, Media and it, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-3836.
Повний текст джерелаInternet is one of the major achievements of 21 century by human kind. Retailers have moved their business towards a global market through internet. Human computer interaction is getting enhanced in different contexts. Consumers can now access the global markets online for the sake of shopping. Fashion industry is getting tremendous popularity in an online environment. Fashion is transformed into digital fashion where people from all over the world have easy access to the world of fashion and can interact and get hands on every piece of art. They can simply buy any fashion product anywhere in the world. The most important part in this domain is the interaction of the consumer with the media for the sake of spending money for goods having a fashion designer at the back end. So here the interaction needs to be precise and specific, especially when it comes to the sizing phase of the activity called shopping garments online. This paper investigates the current sizing trends offered by online fashion retailers and proposes the preferred state interface in order to discover the facts that enables consumers to finalize perfect size for them. The focus is on female users. The results will lead to understanding of the cause of confusion that consumer faces in selecting right size while shopping garments online.
Danielsson, Pehr-Henric. "Iterera, iterera, iterera : En studie om hur en upprepande designprocess kan förbättra användbarheten i Provbankens interaktiva distansprov." Thesis, Växjö University, School of Mathematics and Systems Engineering, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:vxu:diva-508.
Повний текст джерелаProvbanken är en del i ett nationellt provsystem som är tänkt att vara ett bedömningskomplement till existerande prov i gymnasieutbildningen. Växjö universitet har varit delaktig i utvecklingen av prov för de yrkesinriktade ämnena sedan 1997. Eftersom innehållet i dessa numera webbanpassade prov är det väsentliga, måste utformningen av provet göras lättförståelig. Användbarheten måste m a o vara självklar och inte ställa till problem för användaren. Som en av utvecklarna av dessa interaktiva prov, ville jag finna ett sätt att minimera problemen och öka användbarheten. I de bakgrundsstudier som gjordes, fann jag att en iterativ designprocess föreslogs vara den bästa metoden för att åstadkomma mitt mål. Med hjälp av användartest kopplade till teoretiska referensramar, utvärderades ett av proven som skapats vid Växjö universitet. Eftersom ett omvårdnadsprov valdes, blev målgruppen sex omvårdnadselever. Tre av dem deltog i det första användartestet. Datainsamlingen utfördes med hjälp av en kvalitativ metod, där både observationer och intervjuer användes som empiriska insamlingstekniker. I analysen som följdes upptäcktes sex höga eller medelhöga problem, varav tre av de mest akuta valdes att förändras. Dessa problem utvärderades och implementerades med hjälp av teoretiska riktlinjer i en prototyp som användartestades med de tre kvarvarande omvårdnadseleverna. I den analys som gjordes kunde de jämförda resultaten peka på en förbättring av användbarheten i det specifika prov som undersökts. Det kunde dock även konstateras att ett flertal problem återstod för att helt uppnå målet med en minimering av problem.
Denna uppsats visar på betydelsen av att göra iterativa designprocesser i interaktiva system för att öka dess användbarhet. Studien pekar tydligt på vikten av att göra användartest samt hur teori kan vara ett komplement till utformning av interaktiva gränssnitt.
Provbanken is part of a national examination system, which is meant to be a mark-setting complement to existing tests in the upper secondary school. Växjö University has been part of the development of tests regarding the vocational subjects since 1997. Because the content of these web-adapted tests is essential, the design of the tests must be made easy to understand. In other words, the usability has to be obvious and must not create trouble for the user. As one of the developers of these interactive tests, I wanted to find a way to minimize the problems and increase the usability. In the conducted background studies, I found that the iterative design process was suggested as the best method to achieve my goal. With the help of usability tests applied to theoretical frame of reference, one of the tests created at Växjö University was evaluated. Since a test regarding homecare was chosen, the target group became six homecare students. Three of them took part in the first usability test. The gathering of data was conducted with the help of a qualitative method, where observations and interviews were used as empirical techniques. In the following analysis six high or medium high problems were discovered, out of which three of the most urgent problems were solved. These problems were evaluated and implemented with help of theoretical guidelines into a prototype, which later became usability tested with the three remaining homecare students. In the analysis made, the compared results showed an improvement of the usability in the specific, investigated test. However, it could clearly be stated that several issues persisted until the goal of minimizing the problems could be achieved.
This thesis shows the importance of performing iterative design processes in interactive systems in order to increase the usability. The study clearly points out the importance of usability tests and how theory can be a complement in the design of interactive interfaces.
Jacobsson, Mattias. "Tinkering with Interactive Materials : Studies, Concepts and Prototypes." Doctoral thesis, KTH, Medieteknik och interaktionsdesign, MID, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-134939.
Повний текст джерелаQC 20131203
Leiva, Germán. "Interactive Prototyping of Interactions : from Throwaway Prototypes to Takeaway Prototyping." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLS551/document.
Повний текст джерелаPrototyping is essential in any design process. During the early stages, designers rely on rapid prototyping to explore ideas. Current rapid prototyping tools and techniques focus on paper representations and their disposability. However, while these throwaway prototypes are quick to create they are difficult to iterate over. I argue that rapid prototyping tools can effectively support reusable as well as throwaway artifacts for sketching interaction in early-stage design. First, I investigate tools in the context of video prototyping. Designers experience two main barriers to use video in interaction design: the time to capture and edit the video artifacts. To aid during the capturing-phase of video prototyping I created VideoClipper. This tool embodies an integrated iterative design method that rewards discipline but permits flexibility for video prototyping. The tool provides a storyboard-style overview to organize multiple videos in story Lines. VideoClipper offers editable and reusable TitleCards, video capture for steady-state and rough stop-motion filming and the ability to recombine videos in new ways for redesign. I present informal user studies with interaction design students using VideoClipper in three design courses. Results suggest that participants spend less time capturing and editing in VideoClipper than with other video tools. However, many designers find tedious to create stop-motion videos for continuous interactions and to re-shoot clips as the design evolves. Participants continuously try to reduce re-shooting by reusing backgrounds or mixing different levels of fidelity. Inspired by this behavior, I created Montage, a prototyping tool for video prototyping that lets designers progressively augment paper prototypes with digital sketches, facilitating the creation, reuse and exploration of dynamic interactions. Montage uses chroma keying to decouple the prototyped interface from its context of use, letting designers reuse or change them independently. I describe how Montage enhances video prototyping by combining video with digital animated sketches, encourages the exploration of different contexts of use, and supports prototyping of different interaction styles. Second, I investigate how early designs start being implemented into interactive prototypes. Professional designers and developers often struggle when transitioning from the illustration of the design to the actual implementation of the system. In collaboration with Nolwenn Maudet, I conducted three studies that focused on the design and implementation of custom interactions to understand the mismatches between designers' and developers' processes, tools and representations. We find that current practices induce unnecessary rework and cause discrepancies between design and implementation and we identify three recurring types of breakdowns: omitting critical details, ignoring edge cases, and disregarding technical limitations. I propose four design principles to create tools that mitigate these problems: Provide multiple viewpoints, maintain a single source of truth, reveal the invisible and support design by enaction. We apply these principles to create Enact, an interactive live environment for prototyping touch-based interactions. We introduce two studies to assess Enact and to compare designer-developer collaboration with Enact versus current tools. Results suggest that Enact helps participants detect more edge cases, increases designers' participation and provides new opportunities for co-creation. These three prototyping tools rely on the same underlying theoretical principles: reification, polymorphism, reuse, and information substrates. Also, the presented tools outline a new prototyping approach that I call "Takeaway Prototyping". In contrast to throwaway prototypes, instead of emphasizing disposability, tools for "Takeaway Prototyping" support design by enaction and reify design artifacts to materialize the lessons learned
Gannholm, Lovisa. "A Comparative Evaluation Between Two Design Solutions for an Information Dashboard." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-102134.
Повний текст джерелаBerger, Arne. "Prototypen im Interaktionsdesign." Doctoral thesis, Universitätsbibliothek Chemnitz, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-126344.
Повний текст джерелаWhich material manifests a house? A sketch of the house? A car? A model of the car? Answering those questions is relatively simple because architecture and product design cultivate a rich and tangible tradition of prototyping and an adequate design theory. Which material manifests an interactive system? Is it the glas of the touch screen or is it the color of the buttons? Interaction design is an emerging discipline and its accompanying design theory is even more so in its early days. The dissertation contemplates questions of materiality in interaction design. What are interactive prototypes and how can they be sufficiently described? Which properties are inscribed and interpreted by designers, engineers, users and the environment alike? How can this knowledge be utilized for a meaningful transdisciplinary collaboration and equal participation in design processes? The book will start with the premise, that current research positions on prototypes in interaction design are based on hypotheses that are symmetrical in construction. Contemporary prototype research in interaction design focusses on either the artefact or the designer. The proposed research strives to combine those disjunct approaches on a metatheoretical level, via Somatic-Marker-Hypothesis from Neuroscience and Actor-Network-Theory from Philosophy of Technology. This serves as a declaration basis for the symmetric posture of current research and as a point of advancement for practice based research. A variety of empirical findings will be presented. The approach to an exhaustive working definition is building on four stages of analysis. First, this builds on the proposed theoretical framework as a structure for further analyses. In a second step, this framework was used to categorise existing dimensions of prototypes in literature. This extended literature review includes Fidelity Theories and what we call Inscription Theories as well as Form-Material Theories. In a third step, the thereby evolved categories were validated and advanced with content analysis of protocols of design processes between interaction designers and software engineers. In a final step the vocabulary was validated and advanced with of expert interviews
Kolchenko, Mykhailo. "Design and implementation of a next generation Web Interaction SaaS prototype." Thesis, Linnéuniversitetet, Institutionen för datavetenskap, fysik och matematik, DFM, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-34060.
Повний текст джерелаGumeniuk, Oleg. "Design and implementation of a next generation web interaction SaaS prototype." Thesis, Linnéuniversitetet, Institutionen för datavetenskap, fysik och matematik, DFM, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-23499.
Повний текст джерелаALI, SHUJAT. "DESIGN AN INTERFACE PROTOTYPE FOR ELSKIFT.DK : DESIGN A WEBSITE USING ITERATIVE DESIGN PROCESS." Thesis, Uppsala universitet, Institutionen för informatik och media, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-170735.
Повний текст джерелаMöller, Rebecka. "How to create interaction moments at concerts : Designing user experiences." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-232128.
Повний текст джерелаKonsertindustrin har expanderat enormt de senaste åren. Samtidigt som det ökande engagemanget för konserter, växer den digitala marknaden snabbt. Idag använder publiken sina mobiltelefoner under en konsert för att skicka textmeddelanden, ansluta på sociala medier, ta foton, spela in filmklipp och använda ficklampans funktion som en tändare. Det här beteendet kan uppfattas som ett distraherande ögonblick och i stället flytta personens fokus från konserten till telefonen. Det distraherande ögonblicket kan undvikas genom en studie av användarupplevelse som gör att en mobilapplikation gör samspelet smidigare. Det kan leda till mer fokus på musiken och genom det förbättra konsertupplevelsen. I det här projektet beskrivs arbetet bakom utvecklingen av prototyper. Metoden som används i rapporten är processen Design Thinking. Processen är uppdelad i en femstegsmodell: sympatisera, definiera, föreställa, prototyp och testa. Resultatet presenterar tre prototyper som bygger på digitala tävlingar som interagerar publiken under en konsertupplevelse. I slutet av rapporten presenteras en diskussion om hur man kan få ett positivt resultat av att interagera publiken och artisten med varandra. Slutsatsen var att interaktionerna har god potential att fungera i en konsertmiljö, men interaktionerna måste testas ytterligare för att säkerställa ett positivt resultat. En annan slutsats var att tiden före en konsert har mer spelrum för interaktionerna att fungera bra och att inte distrahera användarna från konsertupplevelsen.
Martins, Alessio Pedro. "De la Métaphore à la tâche : une bibliothèque de concepts métaphoriques pour le prototypage de techniques d’interactions." Thesis, Paris, CNAM, 2013. http://www.theses.fr/2013CNAM0877/document.
Повний текст джерелаEmbodied cognition has emerged over the last decades as a new paradigm of the human reasoning system. Large numbers of researchers agree on the influences of perceptual and motor activity on our thinking and representational mechanisms. The importance of embodied mind theory is growing in the field of cognitive science. It is now the conceptual support for innovative projects in human computer interaction (HCI). The new paradigms of HCI are shifting towards the venue of natural, invisible and pervasive interfaces. Office tasks of the 80s and their related interfaces are now being replaced by multimodal commands (gesture, voice) and contextual or social inputs. From graphical user interfaces to tangible and multimodal devices, new sets of innovative interaction techniques are emerging and these can no longer rely on classic metaphors and visual analogies. To increase the meaning of new commands and representations of post-wimp interaction techniques and to build coherent and consistent metaphors between different platforms and embedded devices in our environment, researchers have turned their attention to the embodied vision of the cognitive system.We present in this thesis the embodied cognitive paradigm and how it has been adopted by the HCI community. We illustrate this model by analyzing several tasks carried out in heterogeneous environments. Thereafter, proposals are made on how museums, exhibitions and collaboration tools may use embodied metaphors as a design strategy to produce innovative multimedia devices. The first application was one of mediating access to a database of digitized 3D objects for the Museum of Arts and Crafts in Paris. In this project the digitized objects are displayed in a metaphor of fluids and particles managed by electromagnetic forces that guide the semantics of the user’s search. Browsing tasks in this catalog are intended to be clear and coherent between different platforms in order to respect the user’s levels of desired engagement. An analysis is made of the ability of metaphors to build bridges between the various platform interfaces. In the second application, metaphors related to the concept of visual depth and density was used to propose a 3D timeline so as to visualize temporal data. Finally, the framework synthesizes the embodied metaphorical mappings in a large set of components which will be applied as building blocks when prototyping interaction techniques. This structure takes the form of a conceptual Framework of interaction agents which might serve not only as a tool for prototyping interfaces but also as a catalyst for generating innovative ideas
Sörling, Kristian. "En contentbyrås webbplats : En rapport om utveckling och redesign av en contentbyrås webbplats med fokus på användbarhet." Thesis, Södertörns högskola, Institutionen för naturvetenskap, miljö och teknik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-27808.
Повний текст джерелаThis report describes the process that the development of OTWs new website has entailed. I have been working with creating a redesign of their existing website. The goal has been to create a website which present themselves in a good way and requires less editorial content, while complying with the conventions of the industry and the audience. When developing the site I adapt the design to the prevailing design principles and guidelines for usability so that the site will be as easy to use as possible. The development of the prototype has been taking place in the software program Axure RP. The result of the project is two fully interactive digital prototypes, one for mobile use and one for regular desktop use. It has also resulted in wireframes and design sketches.
Woolley, Alex. "Contextual testing of interactive prototypes at the early stages of the design process." Thesis, Cardiff Metropolitan University, 2008. http://hdl.handle.net/10369/847.
Повний текст джерелаAldulaymi, Mohammed. "Transparency between consumers and grocery stores : Evincer - A design prototype to empower consumer experience during grocery shopping." Thesis, Malmö universitet, Institutionen för konst, kultur och kommunikation (K3), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-45807.
Повний текст джерелаMoussette, Camille. "Simple haptics : Sketching perspectives for the design of haptic interactions." Doctoral thesis, Umeå universitet, Institutionen Designhögskolan, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-60221.
Повний текст джерелаAdamek, Michel. "Creating a Graphical User InterfaceTemplate for Izolde : The complete design process, focusing on usability and design." Thesis, Uppsala University, Department of Information Technology, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-120856.
Повний текст джерелаThe image analysis company Izolde was in need of a user friendly graphical user interface (GUI) to use as a modifiable template to be able to meet a variety of requests and demands from their clientele.
This paper describes the process of designing such a GUI with respect to theories within human computer interaction and available usability principles and theories.To familiarise and learn about other software on the market a background research was conducted. Wireframes as well as prototypes were created. With the help of recognised usability inspection tools tests were conducted on users with varied degree of computer experience. Test results were the basis for what would be altered and improved in terms of usability on the prototypes.
The final result is a flexible user friendly GUI in regards to the criteria outlined by Izolde.
Detta examensarbete beskriver tillvägagångssättet i skapandet av en mall till ett användargränssnitt. Ett användargränssnitt är utseendet på ett program som användaren ser och interagerar med på en datorskärm, skärmen på en telefon eller annan typ av skärm. Användargränssnittet är utseendet av en programvara och det användaren visuellt kan tolka. I klartext tillåter ett användargränssnitt en användare att interagera med hårdvara genom inmatning (användarens påverkan på systemet) och utdata (resultat av användarens påverkan).
Grafiska användargränssnitt skiljer sig från de textbaserade avändargränssnitten som tidigare var dominerande. Textbaserade lösningar känns ofta igen i äldre DOS-program och typiskt hos dessa är textinmatning av diverse kommandon och parametrar som leder till påverkan av systemet. Numer är det de grafiska användargränssnitten som dominerar. Fördelen med dessa är att de bygger på igenkänningsmekanismen hos människans tänkande och att de därför tillåter ett mer intuitivt användande av systemet i och med att de är just grafiska.
Målet med examensarbetet var att designa en gränssnittsmall åt bildanalysföretaget Izolde. Gränssnittsmallen ska kunna modifieras för att kunna möta Izoldes kunders efterfrågan utifrån den typ av analys de vill kunna genomföra. För att kunna genomföra designprocessen krävdes djupare kunskap i vad användarvänlighet innebär och hur denna skall tillämpas i skapandet av ett grafiskt användargränssnitt. Med hjälp av vedertagna principer och teorier inom användarvänlighet var det möjligt att anta rollen som interaktionsdesigner. Interaktiondesign är en disciplin som definieras som beteendet och interaktionen mellan ett föremål, i detta fall ett grafiskt användargränssnitt, och dess användare.
För att säkerställa att designprocessen skulle resultera i ett attraktivt och användarvänligt grafiskt användargränssnitt krävdes även att tester utfördes på användare med olika grad av datorkunskap på de wireframes och prototyper som skapades. En wireframe är en tidig skiss av designen på det slutgiltiga grafiska gränssnittet och kan beskrivas som en enkel ritning på ett papper eller en grov skiss skapat med lämplig programvara av vad designers vision av det slutgiltiga resultatet är. Genom att rita skisser skapar designern sig en god uppfattning om hur det grafiska gränssnittet kommer att presenteras i dess slutgiltiga skick. Dessutom är det mycket enklare och snabbare att göra ändringar på en skiss än i ett avancerat program som kräver mer exakt precision. Prototyper är mer sofistikerade versioner av wireframes och skapas i ett senare skede av designprocessen. Prototyper bär också större likheter med den slutliga produkten än wireframes.
Designprocessen resulterade i ett flexibelt användarvänligt grafiskt användargränssnitt vars karaktär är anpassat i avseende på de kriterier som angetts av Izolde. Förhoppningen är att det skapade gränssnittet kommer kunna användas som en förändringsbar mall till ett gränssnitt som kan anpassas efter de kriterier och önskemål som ges av Izoldes kunder.
Cinelli, Ester. "Syndemic : A design prototype of a dashboard to understand pandemics beyond epidemiology." Thesis, Malmö universitet, Institutionen för konst, kultur och kommunikation (K3), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-43624.
Повний текст джерелаJovic, Igor. "Användarcentrerad Design : Utveckling av prototyper för pekskärmsgränssnitt." Thesis, University of Skövde, School of Humanities and Informatics, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-57.
Повний текст джерелаDet här arbetet preciserar ett problem utifrån ett problemområde som faller inom ramen för användarcentrerad design. Den preciserade problemformuleringen är: I vilken utsträckning kan ett gränssnitt göras användbart genom prototyping, aktiv användarmedverkan och iterativ utveckling genom användningen av en modifierad version av ISO 13407 standarden som ett utvecklingsramverk? Den här frågeställningen har tillämpats och avgränsats till ett pekskärmsgränssnitt vid namn Navigator som är utvecklat av Asko. Resultaten visar att de gränssnittsprototyper som har skapats är användbara. Vidare visar resultaten även att det inte är tillräckligt att enbart använda tre nyckelprinciper för användarcentrerad design i syfte att uppnå användbarhet.
Andersson, Julia, and Jonathan Ek. "Rumsreservationssystem : En komplett designprocess." Thesis, Mittuniversitetet, Institutionen för informationssystem och –teknologi, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:miun:diva-39356.
Повний текст джерелаProjektets mål har varit att undersöka hur rumsreservationssystem ska utformas så att bokade rum nyttjas och så missförstånd om vilka rum som är bokade ej uppstår. För ändamålet har användargränssnitt skapats genom en prototyp och algoritmer har framställts och implementerats. Framställningen av prototyper samt konstruktion och implementering av algoritmer har skett enligt Design Science. Utvärdering av prototypen har inneburit genomförande av användbarhetstester som har visat att det föreslagna användargränssnittet är lättanvänt. Enhetstester och integrationstester har tillämpats upprepade gånger för att säkerställa att de implementerade algoritmerna fungerar korrekt. En enkätundersökning har genomförts för att ta reda på hur ett befintligt rumsreservationssystem och de föreslagna funktionerna uppfattas. Resultatet av enkätundersökningen tyder på att problemen som identifierats upplevs bland enkätdeltagarna och att de föreslagna funktionerna är eftertraktade. Projektets resultat tyder på att fler enkätdeltagare hade varit önskvärt och att användbarhetstestens resultat kan bli annorlunda om de genomförs på ett riktigt system samt att de bör innefatta personer av olika teknisk kompetens. Analys av algoritmerna nämner antaganden som gjorts för deras framställning, vad som bör tas i åtanke för deras implementation och korrigeringar som kan genomföras. Analys av enhetstesten och integrationstesten nämner att de är begränsade i vissa avseenden. Design Science har varit användbart för projektets syfte men har inte alltid varit perfekt. Framtida arbete innebär att ta reda på hur autentisering för systemen bör utformas, utveckla ett komplett system som implementerar lösningsförslagen, korrigera algoritmerna som framställts samt samla in mer data om hur lösningsförslagen och befintliga system uppfattas.
Persson, Malin. "Designing an interface for creating report templates in a test management tool using competitive analysis and prototype testing." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-100235.
Повний текст джерелаHak, Jean-Luc. "Engineering annotations for supporting the design process of interactive systems : a model based approach and a tool suite." Thesis, Toulouse 3, 2019. http://www.theses.fr/2019TOU30062.
Повний текст джерелаDuring the development process of an interactive system, different actors collaborate in the activities of this process and several design choices are made to converge to a solution that meets both user needs and requirements. To achieve this solution, many artifacts are produced, used and reviewed by the various stakeholders of the process. In order to communicate on particular points of an artifact, to collaborate in its elaboration or simply to add additional information, annotations can be created on these artifacts. Depending on the annotations and their contents, some artefacts may subsequently evolve, thus reflecting the influence of annotations on these artifacts and therefore reflecting their influence on the project. Thus, it is possible to consider annotations as a versatile tool playing a significant role in the design process. Nevertheless, several issues can be identified regarding the integration of annotations within the activities of the design process of interactive systems. First, the role of annotations is not clearly defined in the different design processes. While there is a widespread and a ubiquitous use of annotations in the design of interactive systems, current design processes do not address how to relate them to the tasks to be performed and the artifacts to be produced. Secondly, an annotation can be related to several artifacts as each models are giving a complementary representation of the interactive system. However, the multiplicity of artifact types and tools for creating these artifacts is a problem since each tool that provide features for annotations implements their own annotation model. These models are usually restricted to one type of artifact: the one handled by the tool. This implies that the annotations produced within a project are scattered by sets and that each these annotation set is closed to a single type of artifact. This PhD thesis is based on an analysis of annotations and their uses as well as on the W3C "Web Annotation Data Model" recommendation to propose an annotation model and an architecture to centralize the annotations of a project. This architecture also allows to include the annotations support on various tools and type of artifacts. This contribution has been applied on three different case studies to explore the possible integrations of annotations within a design process. The first case study demonstrates the integration and customization of annotations within a prototyping tool. The second case study focuses on the presentation of a tool allowing to consult in a single view all the annotations created on different artefacts and on different models of a project. The third case study illustrates an integration of annotations into an industrial environment that includes existing tools and an existing design process. Thus, these contributions around annotations are used as a basis for the realization of complementary works such as the use of annotations to structure and connect the different models of an interactive system, the use of annotations as a resource for the decisions making processes, and the use of annotations to study the traceability of the evolution of an interactive system. Indeed, by linking the artifacts to each other using annotations and justifying the choice of designs with annotations, it would be possible to ensure the traceability of the different design choices made during a project as well as the traceability of the impact of these different choices on the artifacts
Troel--Madec, Maureen T. "Design through vulnerability: Designing presence in a time of pandemic." Thesis, Malmö universitet, Fakulteten för kultur och samhälle (KS), 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-23142.
Повний текст джерелаMiszkiel, Samanta, and Alan Cheng. "Hej, kom spela med oss! (Hi, come play with us!)." Thesis, Malmö högskola, Fakulteten för kultur och samhälle (KS), 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-22169.
Повний текст джерелаAndersson, Jonatan. "Design och utkast av ett informationssystem för akutkliniken vid Karolinska Sjukhuset : Design samt utvärdering av prototyp för akutpatienter i väntan på vård." Thesis, Linköpings universitet, Institutionen för datavetenskap, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-108344.
Повний текст джерелаAsplund, Ingeborg. "Songs of Transistor : A study of sound design in video games." Thesis, Södertörns högskola, Medieteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-32944.
Повний текст джерелаDanielsson, Pehr-Henric. "Exploring the effects of different fidelities in an early design process of mobile prototyping." Thesis, Södertörn University College, School of Communication, Media and it, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-3716.
Повний текст джерелаThere are a vast number of research and studies undertaken within the domain of user-centered design concerning the design process of an artifact, but still there are questions being raised of the relatively new and successful field of mobile design. During recent years mobile technology have surpassed the standardized thoughts of how to prototype and evaluate such a ubiquitous device. The paper addresses this predicament by discussing aspects of fidelity differences in an early design process of a mobile design. The example being presented refers to a design study of an iPhone-application, where two different types of prototypes were created and user tested, a low-fidelity paper prototype and a mixed-fidelity interactive prototype. The paper sets focus on the various differences between these fidelities closely related to the case. It also reflects on how mobile design approaches can mature during the early stages of a design process.
Åberg, Adam. "Vehicle Design." Thesis, Blekinge Tekniska Högskola, Sektionen för planering och mediedesign, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-2077.
Повний текст джерелаhttp://aadiart.wordpress.com/
Lindström, Daniel. "Visualizing future buildings : User-centered design process and evaluation of a sensor-based MAR prototype." Thesis, KTH, Skolan för datavetenskap och kommunikation (CSC), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-215771.
Повний текст джерелаMobil förstärkt verklighet (Mobile Augmented Reality, eller MAR) är en teknik på frammarsch som utvecklas i snabb takt. MAR har möjligheten att leverera en rik upplevelse till användaren. Dock är utvecklingen av MAR, likt de flesta tekniker under snabb utveckling, teknikdriven vilket ofta medför att användarens behov glöms bort. I denna studie står användaren i fokus när en sensorbaserad MAR-prototyp utvecklas och utvärderas. Allt detta sker med hjälp utav en användarcentrerad designprocess och prototypen används för att visualisera en kommande byggnad i Stockholm, Sverige. Vid utveckling av en sensorbaserad MAR-upplevelse står man inför ett flertal utmaningar och problem som alla behöver adresseras för att kunna leverera en bra upplevelse till användaren. Dels finns hårdvaruproblem så som att sensorer i dagens smartphones är långt ifrån perfekta, detta medför problematik i placeringen utav 3D-objekt som baseras på sensordata. En annan utmaning är att testa och validera idéer i ett tidigt skede av utvecklingen. Vanligtvis när man följer en användarcentrerad designprocess är tidiga prototyper ett användbart verktyg för testning och validering. Dock kräver även den enklaste MAR-upplevelsen en avancerad infrastruktur, som är både dyr och tidskrävande att utveckla. I denna studie tas dessa problem och utmaningar i beaktning redan i ett tidigt utvecklingsstadium. Väldesignade funktioner utvecklas för att motverka och minska inverkan utav dessa problem. För att utvärdera den slutgiltiga prototypen utfördes ett användartest i stadsmiljö. En viktig lärdom från denna studie är att dagens smartphones inte erbjuder tillräckligt robust och precis mätning av sensordata i stadsmiljö för att leverera en bra användarupplevelse. Detta resulterade i felaktig och hoppande/skakig placering av 3D-objekt. De funktioner som utvecklades för att motverka problemen med MAR hjälpte i viss utsträckning, dessa påvisade en potential att överkomma hårdvarubrister med smarta och väldesignade funktioner. Att använda AR-ramverk för att producera interaktiva MAR-prototyper, till en låg kostnad och med relativt kort utvecklingstid, visade sig lyckat.
Wang, Yinghua. "Participatory Action Research with Chinese-American Families: Developing Digital Prototypes of Chinese Art Education Resources." The Ohio State University, 2013. http://rave.ohiolink.edu/etdc/view?acc_num=osu1385092278.
Повний текст джерелаCotoranu, Alexandru. "Supporting Interaction Designers through the Accomplishment Support Tool: IxD Companion." Thesis, Malmö högskola, Fakulteten för kultur och samhälle (KS), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-23765.
Повний текст джерелаPentz, Audrey. "Designing a mobile application interface to support mid-career professionals in creating better financial futures." Master's thesis, Faculty of Science, 2021. http://hdl.handle.net/11427/32916.
Повний текст джерелаLarsson, Ingrid. "Interface Design – a User-Centered Design Process : A qualitative study how to improve the Usability of a web-based consumer tool that measuring the quality of streamed videos." Thesis, KTH, Skolan för datavetenskap och kommunikation (CSC), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-169644.
Повний текст джерелаShan, Zehua. "Design and evaluation of an interface prototype for content selection for a game that supports user-generated content." Thesis, KTH, Skolan för datavetenskap och kommunikation (CSC), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-209434.
Повний текст джерелаSpel som stödjer en hög grad av anpassning är få, och deras framgång varierar, men det är en tydlig trend att fler och fler spel strävar efter att erbjuda spelare mer anpassningsbar spelupplevelse. En stor del av den anpassningsbara upplevelsen utöver att skapa och dela användarens skapelser är att uppleva upplevelser som skapats av andra. Att utforma ett sådant gränssnitt som stödjer användaren att göra det ställer många utmaningar. Vad behöver användarna? Hur ska innehållet visas? Vad letar användare efter när man försöker hitta något intressant? Det är bara några av de frågor som behöver besvaras när man skapar en lösning för ett sådant gränssnitt. Frågan som den här studien försöker svara är: Vilka är huvudelementen för ett innehållsvalgränssnitt som uppfyller användarnas behov och uppfyller förväntningarna för ett spel som stöder väldigt olika spelupplevelser? En undersökning skickades ut för att få tag på vad användarna behöver, med resultaten från undersökningen och kunskapen från bakgrundsstudien utvecklades en gränssnittsprototypdesign. För att få en verklighetskontroll från potentiella användare utvärderades prototypen med användartestning, och feedback från användarna samlades genom halvstrukturerade intervjuer. Resultatet tyder på att den föreslagna uppsättningen funktions- och information tillgänglig är tillräcklig för de flesta användare, och strukturen var tydlig. Det finns dock vissa funktioner som användarna vill se, vilket kan vara användbart för att hjälpa användare att hitta intressant innehåll. Kunskapen från studien resulterade i en prototyp och några förslag till framtida arbete avseende liknande projekt.
Ganibegovic, Emil, and Aram Tadevosyan. "Prototypgenererade personas - för vidareutveckling av IT produkt." Thesis, Luleå tekniska universitet, Institutionen för system- och rymdteknik, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-85196.
Повний текст джерелаPrototypes in interaction design are used to implement ideas into practical digital solutions and are built to test a design solution and to obtain feedback from the solution. A prototype can apply to the entire product or a limited part of it and can also shape the role of the intended product. Persona is a tool that is often used in interaction design where previous research in the subject presents that continued research on how persona can be used is important to create a greater understanding of the use. This study examines how persona can be used in different phases of a user-centered designprocess and to investigate whether the information collected from a HiFi prototype can enrich persona with data from interviews and quantitative variables, such as keystrokes, and which can then be used in a company during the development of a new product or further development ofan existing product. The survey required that a five-step method for data collection be developed with an extra effort on evaluating results from interview responses. The survey consists of a total of 10 user tests where users have been exposed to the prototype. The interviews reflect the testers' experiences in the environment. The study shows how a HiFi prototype can enrich personas and which can be used in the development and further development of a product. The evaluation, which was then based on three interviews at a company, shows that the data obtained can be considered useful in various formats and that it provides a good insight into understanding its users before a further development of a product.
Olofsson, Kristin. "En förstudie kring en klickbar prototyp med fokus på balansen mellan användarnas behov och kundens krav : En kundportal som erbjuder städtjänster." Thesis, Södertörns högskola, Institutionen för naturvetenskap, miljö och teknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-30270.
Повний текст джерелаThis pilot study investigates how one can balance a user-centrered workprocess against the business goals of the client. It investigates the challenges in creating a service providing portal by using the clients own information model but having the users in focus. With the help of four oral interviews and observations, data has been collected on how the client work with their users today. Using this understanding a prototype was created to test on two users, using Think Aloud-observations. The feedback from the tests were used to iterate the prototype further. The results showed the importance of doing it before the creation of an information model. With the help of a pilot study new innovative ideas can come up. The conclusion was that working after a user-centered method does not work if the client does not allow involvement of the users themselves. The pilot study shows the possibilities in involving users in the creation of a prototype to eliminate future problems in interaction design of a portal.
Korzetz, Mandy, Romina Kühn, Karl Kegel, Franz-Wilhelm Schumann, Leon Georgi, and Thomas Schlegel. "MilkyWay: A Toolbox for Prototyping Collaborative Mobile-Based Interaction Techniques." Springer, 2019. https://tud.qucosa.de/id/qucosa%3A71301.
Повний текст джерелаBerger, Arne. "Prototypen im Interaktionsdesign: Klassifizierung der Dimensionen von Entwurfsartefakten zur Optimierung der Kooperation von Design und Informatik." Universitätsverlag Chemnitz, 2013. https://monarch.qucosa.de/id/qucosa%3A19961.
Повний текст джерелаWhich material manifests a house? A sketch of the house? A car? A model of the car? Answering those questions is relatively simple because architecture and product design cultivate a rich and tangible tradition of prototyping and an adequate design theory. Which material manifests an interactive system? Is it the glas of the touch screen or is it the color of the buttons? Interaction design is an emerging discipline and its accompanying design theory is even more so in its early days. The dissertation contemplates questions of materiality in interaction design. What are interactive prototypes and how can they be sufficiently described? Which properties are inscribed and interpreted by designers, engineers, users and the environment alike? How can this knowledge be utilized for a meaningful transdisciplinary collaboration and equal participation in design processes? The book will start with the premise, that current research positions on prototypes in interaction design are based on hypotheses that are symmetrical in construction. Contemporary prototype research in interaction design focusses on either the artefact or the designer. The proposed research strives to combine those disjunct approaches on a metatheoretical level, via Somatic-Marker-Hypothesis from Neuroscience and Actor-Network-Theory from Philosophy of Technology. This serves as a declaration basis for the symmetric posture of current research and as a point of advancement for practice based research. A variety of empirical findings will be presented. The approach to an exhaustive working definition is building on four stages of analysis. First, this builds on the proposed theoretical framework as a structure for further analyses. In a second step, this framework was used to categorise existing dimensions of prototypes in literature. This extended literature review includes Fidelity Theories and what we call Inscription Theories as well as Form-Material Theories. In a third step, the thereby evolved categories were validated and advanced with content analysis of protocols of design processes between interaction designers and software engineers. In a final step the vocabulary was validated and advanced with of expert interviews.
Kulinska, Maria. "Digital tools for developing customized co-design platform with integration of comfort and fashion." Thesis, Lille 1, 2018. http://www.theses.fr/2018LIL1I046/document.
Повний текст джерелаDespite modern technological progresses, the apparel industry is still anchored in the traditional 2D-to-3D design approach. Additionally, the aspects of the relation between human body and garment are not sufficiently explored in order to provide satisfactory performance of virtual try-on in the aspects of providing not only right fit and comfort to the customer but also avoiding returns to the retailer. However the main aspect is a lack of appropriately resolved issue of consumers’ body recognition in an online environment and proper 3D design methodology for individual client. In my PhD research, we challenge those gaps by proposing a foundation of a digital and knowledge-based platform for garment design and fit and comfort evaluation by integrating customers' and experts’ knowledge with the design parameters. By building a new 3D design strategy, we proposed an original method to calculate and adjust the 3D ease allowance values, which constitutes the key issues of satisfaction perception. Our 3D design method is linked to the consumer’s virtual representation, which come from a new pattern recognition method permitting to identify individual morphology from a single web-camera. It was experimentally shown that using the supervised method to create 2D shape descriptors enables to detect wearers’ morphotypes for a target population. The complex relationship between wearers’ body recognition, 3D garment design and garment fitting in virtual try-on has been tested and analyzed in the scope of this research project to build a suitable design solution applied to the remote environment
Martins, Alessio Pedro. "De la Métaphore à la tâche : une bibliothèque de concepts métaphoriques pour le prototypage de techniques d'interactions." Phd thesis, Conservatoire national des arts et metiers - CNAM, 2013. http://tel.archives-ouvertes.fr/tel-00953425.
Повний текст джерелаHöglund, Salomon. "En studie i blått : En ombyggnation av startsidan för en idrottsorganisations webbplats." Thesis, Södertörns högskola, Institutionen för naturvetenskap, miljö och teknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:sh:diva-30316.
Повний текст джерелаThe goal with this practical thesis was to develop a finished proposal of a new home page to a sport organization for its website built on WordPress. This has been achieved by analyzing the existing home page, as well as the home page of four external sports organization’s websites. The analysis resulted in a Low-Fidelity Wireframe showing the main flow of the new home page, as well as a hard coded High-Fidelity Prototype. It all resulted in a WordPress Child-theme to the existing Parent-theme for the sport organization’s website that was well adapted to the organization’s wishes and demands, and built with responsive web design in mind to meet the growing group of visitors on mobile devices.
Ehrenberg, Nils, and Simon Landstedt. "Malmöspanaren - En digital plattform för deltagande förvaltning av Malmö stads cykelvägnät." Thesis, Malmö högskola, Fakulteten för kultur och samhälle (KS), 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-23886.
Повний текст джерелаPetersson, Christina, and Malin Perkins. "The Digital Sales Bell : A design proposal for a digital, motivational work tool." Thesis, KTH, Skolan för elektroteknik och datavetenskap (EECS), 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-260145.
Повний текст джерелаDet här är en studie inom området datavetenskap och industriell ekonomi, med fokus på människa-dator interaktion. Avhandlingens kärna är hur ett digitalt verktyg kan öka anställdas motivation på arbetsplatsen. Motivationseffekten från den fysiska säljklockan, ett känt motivationsverktyg inom säljverksamhet, har varit studiens utgångspunkt. En kvalitativ datainsamling med säljare som population har använts för att analysera och bestämma vilka funktioner ett motsvarande digitalt verktyg bör ha för att uppnå en motiverande effekt. Datainsamlingen har också fungerat som en bas vid skapandet av personas och scenarios, vilka visar vilka behov och vilken användning produktens framtida användare potentiellt kommer att ha. Den agila designprocessen har bestått av användarcentrerade tester och evalueringar som använts för att utveckla ett optimalt designförslag och få djupare förståelse för hur användare uppfattar och interagerar med prototypens funktioner. Den slutgiltiga prototypen presenteras tillsammans med en detaljerad specifikation innehållande gränssnittets design, krav på mjukvaran samt estimerad kostnad för att utveckla och integrera produkten i en säljverksamhet. För fallstudie och testprocess har start-up telekomföretaget Telness använts.
Johansson, Maria. "Gestaltningstekniker i interaktionsdesign : en fråga om syfte och publik." Thesis, Linköping University, Department of Computer and Information Science, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-8717.
Повний текст джерелаDenna studie är en fallstudie av ett privat sjukvårdsföretag. Studien syftar till att undersöka hur olika gestaltningstekniker
samt gruppers sammansättning kan påverka diskussioner kring design och därmed fungera som strukturerande resurser för
samtalet. Studien vidgar begreppet prototyper till att hantera mer än de delar som behandlats i tidigare forskning: medium,
detaljrikedom och närhet till slutprodukt.
Datainsamling har skett vid sex fokusgruppstillfällen där tre olika grupper (inom olika delar av en och samma organisation:
användare hos kund, användare hos systemleverantören och systemutvecklare hos leverantören) har fört en diskussion kring
designen utifrån tre olika gestaltningstekniker (gränssnittsskisser, scenarios och dynamiska datorprototyper).
Diskussionerna har sedan analyserats i termer av domäner för interaktionsdesign och aspekter av IT-systemet i användning.
Studiens huvudsakliga slutsatser är att gestaltningstekniker påverkar vilka domäner och aspekter som diskuteras varför
designern kan välja gestaltningsteknik efter vad han eller hon vill få ut av diskussionen. Skisserna bedöms ge den mest
heltäckande diskussionen, medan scenarios fungerar bäst för dem som inte är teknikvana och tar då upp struktur och
funktion. Datorprototypen lämpar sig bäst för diskussion kring interaktion och presentation. Men gruppens sammansättning
påverkar diskussionen i högre utsträckning än gestaltningsteknikerna. Därför dras även slutsatsen att det är viktigt att
designern känner sin publik och anpassar valet av gestaltningsteknik efter målgruppen.
This thesis investigates how different prototyping techniques and compositions of groups can influence discussions about
design and therefore function as structuring resources for the discussion. This thesis widens the conception of prototypes to
include more than the issues that have been discussed in previous research: medium, wealth of details and closeness to the
final product.
Data has been collected through six focus groups where three different groups (within different parts of one organization;
users at client, users at system supplier, and systems developers at supplier) have discussed the design with the help of the
different prototyping techniques (sketches, scenarios and dynamic computer prototypes).
The discussions where analyzed in terms of domains for interaction design and different aspects of the system in use.
The main conclusions of this thesis are that prototyping techniques influence which domains and aspects are discussed.
Therefore the designer can choose prototyping technique depending on what he or she wants to discuss about the design.
The sketches provides the most complete discussion, while scenarios works best with those that are not knowledgeable
about IT-systems and then the discussion deals with structure and function. The computer prototype is best suited for
discussing interaction and presentation. But the composition of the group has more influence on the discussion than the
choice of prototyping technique. Therefore the conclusion is drawn that it is important that the designer knows his or her
audience and adjusts the choice of prototyping technique to the composition of the group.
Cottman-Fields, Mark D. "Virtual birding : extending birdwatching to review acoustic recordings." Thesis, Queensland University of Technology, 2017. https://eprints.qut.edu.au/104232/1/Mark_Cottman-Fields_Thesis.pdf.
Повний текст джерелаBoustedt, Tova. "Klinikintern statistik : en fallstudie kring behov av och möjligheter till framtagandet av ett statistikverktyg." Thesis, Uppsala universitet, Avdelningen för visuell information och interaktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-236193.
Повний текст джерела