Добірка наукової літератури з теми "Intense Convective Cloud (ICC)"

Tropical Rainfall Measuring Mission Precipitation Radar (TRMM-PR) based vertical structure in intense convective precipitation is presented here for Indian and Austral summer monsoon seasons. TRMM 2A23 data is used to identify the convective echoes in PR data. Two types of cloud cells are constructed here, namely intense convective cloud (ICC) and most intense convective cloud (MICC). ICC consists of PR radar beams having Ze>=40 dBZ above 1.5 km in convective precipitation area, whereas MICC, consists of maximum reflectivity at each altitude in convective precipitation area, with at least one radar pixel must be higher than 40 dBZ or more above 1.5 km within the selected areas. We have selected 20 locations across the tropics to see the regional differences in the vertical structure of convective clouds. One of the important findings of the present study is identical behavior in the average vertical profiles in intense convective precipitation in lower troposphere across the different areas. MICCs show the higher regional differences compared to ICCs between 5-12 km altitude. Land dominated areas show higher regional differences and Southeast south America (SESA) has the strongest vertical profile (higher Ze at higher altitude) followed by Indo-Gangetic plain (IGP), Africa, north Latin America whereas weakest vertical profile occurs over Australia. Overall SESA (41%) and IGP (36%) consist higher fraction of deep convective clouds (>10 km), whereas, among the tropical oceanic areas, Western (Eastern) equatorial Indian ocean consists higher fraction of low (high) level of convective clouds. Nearly identical average vertical profiles over the tropical oceanic areas, indicate the similarity in the development of intense convective clouds and useful while considering them in model studies.

AbstractThis study is based on the analysis of 10 years of data for radar reflectivity factor Ze as derived from the TRMM Precipitation Radar (PR) measurements. The vertical structure of active convective clouds at the PR pixel scale has been extracted by defining two types of convective cells. The first one is cumulonimbus tower (CbT), which contains Ze ≥ 20 dBZ at 12-km altitude and is at least 9 km deep. The other is intense convective cloud (ICC), which belongs to the top 5% of the population of the Ze distribution at a prescribed reference height. Here two reference heights (3 and 8 km) have been chosen. Regional differences in the vertical structure of convective cells have been explored by considering 16 locations distributed across the tropics and two locations in the subtropics. The choice of oceanic locations is based on the sea surface temperature; that of the land locations is based on propensity for intense convection. One of the main findings of the study is the close similarity in the average vertical profiles of CbTs and ICCs in the mid- and lower troposphere across the ocean basins whereas differences over land areas are larger and depend on the selected reference height. The foothills of the western Himalaya, southeastern South America, and the Indo-Gangetic Plain contain the most intense CbTs; equatorial Africa, the foothills of the western Himalaya, and equatorial South America contain the most intense ICCs. Close similarity among the oceanic profiles suggests that the development of vigorous convective cells over warm oceans is similar and that understanding gained in one region is extendable to other areas.

Abstract. Thermal structure associated with deep convective clouds is investigated using Global Positioning System (GPS) radio occultation measurements. GPS data are insensitive to the presence of clouds, and provide high vertical resolution and high accuracy measurements to identify associated temperature behavior. Deep convective systems are identified using International Satellite Cloud Climatology Project (ISCCP) satellite data, and cloud tops are accurately measured using Cloud-Aerosol Lidar with Orthogonal Polarization (CALIPSO) lidar observations; we focus on 53 cases of near-coincident GPS occultations with CALIPSO profiles over deep convection. Results show a sharp spike in GPS bending angle highly correlated to the top of the clouds, corresponding to anomalously cold temperatures within the clouds. Above the clouds the temperatures return to background conditions, and there is a strong inversion at cloud top. For cloud tops below 14 km, the temperature lapse rate within the cloud often approaches a moist adiabat, consistent with rapid undiluted ascent within the convective systems.

Abstract. Thermal structure associated with deep convective clouds is investigated using Global Positioning System (GPS) radio occultation measurements. GPS data are insensitive to the presence of clouds, and provide high vertical resolution and high accuracy measurements to identify associated temperature behavior. Deep convective systems are identified using International Satellite Cloud Climatology Project (ISCCP) satellite data, and cloud tops are accurately measured using Cloud-Aerosol Lidar with Orthogonal Polarization (CALIPSO) lidar observations; we focus on 53 cases of near-coincident GPS occultations with CALIPSO profiles over deep convection. Results show a sharp spike in GPS bending angle highly correlated to the top of the clouds, corresponding to anomalously cold temperatures within the clouds. Above the clouds the temperatures return to background conditions, and there is a strong inversion at cloud top. For cloud tops below 14 km, the temperature lapse rate within the cloud often approaches a moist adiabat, consistent with rapid undiluted ascent within the convective systems.

Abstract Simulations of observations from potential spaceborne radars are made based on storm structure generated from the three-dimensional (3D) Goddard cumulus ensemble model simulation of an intense overland convective system. Five frequencies of 3, 10, 14, 35, and 95 GHz are discussed, but the Tropical Rainfall Measuring Mission precipitation radar sensor frequency ( 14 GHz) is the focus of this study. Radar reflectivities and their attenuation in various atmospheric conditions are studied in this simulation. With the attenuation from cloud and precipitation in the estimation of reflectivity factor (dBZ), the reflectivities in the lower atmosphere in the convective coresare significantly reduced. With spatial resolution of 4 km X 4 km, attenuation at 14 GHz may cause as large as a 20-dBZ difference between the simulated measurements of the peak (Zmp) and near-surface reflectivity (Zmp) in the most intense convective region. The Zmp occurs at various altitudes depending on the hydrometeor concentrations and their vertical distribution. Despite the significant attenuation in the intense cores, the presence of the rain maximum is easily detected by using information of Zmp. In the stratiform region, the attenuation is quite limited (usually less than 5 dBZ), and the reduction of reflectivity is mostly related to the actual vertical structure of cloud distribution. Since Zmp suffers severe attenuation and tends to underestimate surface rainfall intensity in convective regions, Zmp can be more representative for rainfall retrieval in the lower atmosphere in these regions. In the stratiform region where attenuation is negligible, however, Zmp tends to overestimate surface rainfall and Zmp is more appropriate for rainfall retrieval. A hybrid technique using a weight between the two rain intensities is testedand found potentially useful for future applications. The estimated surface rain-rate map based on this hybrid approach captures many of the details of the cloud model rain field but still slightly underestimates the rain-rate maximum.

By using products of the cloud model, National Centers for Environmental Prediction (NCEP) Final Operational Global Analysis (FNL) reanalysis data, and Doppler weather radar data, the mesoscale characteristics, microphysical structure, and mechanism of two hail cloud systems which occurred successively within 24 h in southeastern Yunnan have been analyzed. The results show that under the influence of two southwest jets in front of the south branch trough (SBT) and the periphery of the western Pacific subtropical high (WPSH), the northeast-southwest banded echoes affect the southeastern Yunnan of China twice. Meanwhile, the local mesoscale radial wind convergence and uneven wind speed lead to the intense development of convective echoes and the occurrence of hail. The simulated convective cloud bands are similar to the observation. The high-level mesoscale convergence line leads to the development of convective cloud bands. The low-level wind direction or wind speed convergence and the high-level wind speed divergence form a deep tilted updraft, with the maximum velocity of 15 m·s−1 at the −40~−10 °C layer, resulting in the intense development of local convective clouds. The hail embryos form through the conversion or collision growth of cloud water and snowflakes and have little to do with rain and ice crystals. Abundant cloud water, especially the accumulation region of high supercooled water (cloud water) near the 0 °C layer, is the key to the formation of hail embryos, in which qc is up to 1.92 g·kg−1 at the −4~−2 °C layer. The hail embryos mainly grow by collision-coalescence (collision-freezing) with cloud water (supercooled cloud drops) and snow crystal riming.

Abstract The University of Wisconsin Convective Initiation (UWCI) algorithm utilizes geostationary IR satellite data to compute cloud-top cooling (UW-CTC) rates and assign CI nowcasts to vertically growing clouds. This study is motivated by National Weather Service (NWS) forecaster reviews of the algorithm output, which hypothesized that more intense cloud-top cooling corresponds to more vigorous short-term (0–60 min) convective development. An objective validation of UW-CTC rates using a satellite-based object-tracking methodology is presented, along with a prognostic evaluation of such cloud-top cooling rates for use in forecasting the growth and development of deep convection. In general, both a cloud object’s instantaneous and maximum cooling rate(s) are shown to be useful prognostic tools in predicting future radar intensification. UW-CTC rates are shown to be most skillful in detecting convective clouds that achieved intense radar signatures. The UW-CTC rate lead time ahead of the various radar fields is also shown, along with an illustration of the benefit of UW-CTC rates in operational forecasting. The results of this study suggest that convective clouds with the strongest UW-CTC rates are more likely to achieve significant near-term (0–60 min) radar signatures in such fields as composite reflectivity, vertically integrated liquid (VIL), and maximum estimated size of hail (MESH) compared to clouds that exhibit only weak UW-CTC rates.

Abstract Nested cloud-system-resolving model simulations of tropical convective clouds observed during the recent Tropical Warm Pool-International Cloud Experiment (TWP-ICE) are conducted using the Weather Research and Forecasting (WRF) model. The WRF model is configured with a highest-resolving domain that uses 1.3-km grid spacing and is centered over Darwin, Australia. The performance of the model in simulating two different convective regimes observed during TWP-ICE is considered. The first regime is characteristic of the active monsoon, which features widespread cloud cover that is similar to maritime convection. The second regime is a monsoon break, which contains intense localized systems that are representative of diurnally forced continental convection. Many aspects of the model performance are considered, including their sensitivity to physical parameterizations and initialization time, and the spatial statistics of rainfall accumulations and the rain-rate distribution. While the simulations highlight many challenges and difficulties in correctly modeling the convection in the two regimes, they show that provided the mesoscale environment is adequately reproduced by the model, the statistics of the simulated rainfall agrees reasonably well with the observations.

Abstract Mesoscale convective systems (MCSs) are important drivers of the atmospheric large-scale circulation through their associated diabatic heating profile. Taking advantage of recent tracking techniques, this study investigates the evolution of macrophysical, microphysical, and radiative properties over the MCS life cycle by merging geostationary and polar-orbiting satellite data. These observations are performed in three major convective areas: continental West Africa, the adjacent Atlantic Ocean, and the open Indian Ocean. MCS properties are also investigated according to internal subregions (convective, stratiform, and nonprecipitating anvil). Continental MCSs show a specific life cycle, with more intense convection at the beginning. Larger and denser hydrometeors are thus found at higher altitudes, as well as up to the cirriform subregion. Oceanic MCSs have more constant reflectivity values, suggesting a less intense convective updraft, but more persistent intensity. A layer of small crystals is found in all subregions, but with a depth that varies according to the MCS subregion and life cycle. Radiative properties are also examined. It appears that the evolution of large and dense hydrometeors tends to control the evolution of the cloud albedo and the outgoing longwave radiation. The impact of dense hydrometeors, detrained from the convective towers, is also seen in the radiative heating profiles, in particular in the shortwave domain. A dipole of cooling near the cloud top and heating near the cloud base is found in the longwave; this cooling intensifies near the end of the life cycle.

Abstract. Warm conveyor belts (WCBs) are dynamically important, strongly ascending and mostly stratiform cloud-forming airstreams in extratropical cyclones. Despite the predominantly stratiform character of the WCB's large-scale cloud band, convective clouds can be embedded in it. This embedded convection leads to a heterogeneously structured cloud band with locally enhanced hydrometeor content, intense surface precipitation and substantial amounts of graupel in the middle troposphere. Recent studies showed that embedded convection forms dynamically relevant quasi-horizontal potential vorticity (PV) dipoles in the upper troposphere. Thereby one pole can reach strongly negative PV values associated with inertial or symmetric instability near the upper-level PV waveguide, where it can interact with and modify the upper-level jet. This study analyzes the characteristics of embedded convection in the WCB of cyclone Sanchez based on WCB online trajectories from a convection-permitting simulation and airborne radar observations during the North Atlantic Waveguide and Downstream Impact Experiment (NAWDEX) field campaign (intense observation periods, IOPs, 10 and 11). In the first part, we present the radar reflectivity structure of the WCB and corroborate its heterogeneous cloud structure and the occurrence of embedded convection. Radar observations in three different sub-regions of the WCB cloud band reveal the differing intensity of its embedded convection, which is qualitatively confirmed by the ascent rates of the online WCB trajectories. The detailed ascent behavior of the WCB trajectories reveals that very intense convection with ascent rates of 600 hPa in 30–60 min occurs, in addition to comparatively moderate convection with slower ascent velocities as reported in previous case studies. In the second part of this study, a systematic Lagrangian composite analysis based on online trajectories for two sub-categories of WCB-embedded convection – moderate and intense convection – is performed. Composites of the cloud and precipitation structure confirm the large influence of embedded convection: intense convection produces very intense local surface precipitation with peak values exceeding 6 mm in 15 min and large amounts of graupel of up to 2.8 g kg−1 in the middle troposphere (compared to 3.9 mm and 1.0 g kg−1 for the moderate convective WCB sub-category). In the upper troposphere, both convective WCB trajectory sub-categories form a small-scale and weak PV dipole, with one pole reaching weakly negative PV values. However, for this WCB case study – in contrast to previous case studies reporting convective PV dipoles in the WCB ascent region with the negative PV pole near the upper-level jet – the negative PV pole is located east of the convective ascent region, i.e., away from the upper-level jet. Moreover, the PV dipole formed by the intense convective WCB trajectories is weaker and has a smaller horizontal and vertical extent compared to a previous NAWDEX case study of WCB-embedded convection, despite faster ascent rates in this case. The absence of a strong upper-level jet and the weak vertical shear of the ambient wind in cyclone Sanchez are accountable for the weak diabatic PV modification in the upper troposphere. This implies that the strength of embedded convection alone is not a reliable measure for the effect of embedded convection on upper-level PV modification and its impact on the upper-level jet. Instead, the profile of vertical wind shear and the alignment of embedded convection with a strong upper-level jet play a key role for the formation of coherent negative PV features near the jet. Finally, these results highlight the large case-to-case variability of embedded convection not only in terms of frequency and intensity of embedded convection in WCBs but also in terms of its dynamical implications.