Дисертації з теми "Inorganic Nanoparticles, Organic Particles"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Inorganic Nanoparticles, Organic Particles".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Agrawal, Mukesh. "Design, Fabrication and Applications of Organic-Inorganic Hybrid Systems." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2008. http://nbn-resolving.de/urn:nbn:de:bsz:14-ds-1222087625808-43472.
Повний текст джерелаAlfinaikh, Reem. "Preparation and Characterization of Poly(Ethylene Oxide)(MW 35K and 100K)/ Silica Nanoparticle Composites." DigitalCommons@Robert W. Woodruff Library, Atlanta University Center, 2017. http://digitalcommons.auctr.edu/cauetds/109.
Повний текст джерелаPryor, Donald Edward. "Synthesis and Bioactivity Studies of Nanoparticles Based on Simple Inorganic and Coordination Gallium Compounds as Cellular Delivering Vehicles of Ga(III) Ions for Potential Therapeutic Applications." Kent State University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=kent1543554532063877.
Повний текст джерелаOtsuka, Takeshi. "Functionalization of Organic-Inorganic Nano-Hybrids Utilizing Inorganic Nanoparticles." 京都大学 (Kyoto University), 2010. http://hdl.handle.net/2433/126813.
Повний текст джерелаKeum, Dong-ki. "Organic-inorganic composites of CaCO3 particles by organic polymer templates." 京都大学 (Kyoto University), 2004. http://hdl.handle.net/2433/147661.
Повний текст джерелаLuo, Jiazhong. "Inorganic-organic nanocomposites formed using porous ceramic particles." The Ohio State University, 1998. http://catalog.hathitrust.org/api/volumes/oclc/48108383.html.
Повний текст джерелаAdvisor: John J. Lannutti, Dept. of Materials Science and Engineering. eContent provider-neutral record in process. Description based on print version record. Includes bibliographical references.
Deotare, Parag Bhaskar. "Fabrication of organic and inorganic nanoparticles using electrospray." [College Station, Tex. : Texas A&M University, 2007. http://hdl.handle.net/1969.1/ETD-TAMU-1290.
Повний текст джерелаSchumacher, Manuela. "Smart organic-inorganic nanohybrids of functionalized silsesquioxane nanoparticles." kostenfrei, 2008. http://opus.ub.uni-bayreuth.de/volltexte/2009/549/.
Повний текст джерелаIto, Hideaki. "Synthesis of Organic-Inorganic Nanocomposites of Metal Nanoparticles." 京都大学 (Kyoto University), 2004. http://hdl.handle.net/2433/147659.
Повний текст джерелаJung, Jaehan. "Organic-inorganic nanocomposites for renewable energy conversion devices." Diss., Georgia Institute of Technology, 2015. http://hdl.handle.net/1853/53537.
Повний текст джерелаPerson, Vernecia. "Structure Properties of Heterophase Hairy-Nanoparticles: Organic vs. Inorganic." DigitalCommons@Robert W. Woodruff Library, Atlanta University Center, 2015. http://digitalcommons.auctr.edu/cauetds/59.
Повний текст джерелаCaponetti, Valeria <1989>. "Organic and inorganic nanoparticles for imaging and sensing in water." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2020. http://amsdottorato.unibo.it/9312/1/Tesi%20Valeria%20Caponetti.pdf.
Повний текст джерелаTotovao, Ricardo. "Stimuli-responsive breakable hybrid organic/inorganic silica nanoparticles for biomedical applications." Thesis, Strasbourg, 2017. http://www.theses.fr/2017STRAF014/document.
Повний текст джерелаTo overcome the limitations of most of the drugs avaible nowadays on the market due to their lack of solubility and specifity in cancer treatment for instance, nanomedicine plays an emerging role as an alternative. In that field, nanoparticles are endowed with several advantages, leading them to be highly considered for drug delivery systems preparation. In this respect, silica nanoparticles have recently a great deal of attention from the scientists. Nevertheless, some issues related to the in vivo elimination of silica materials represent the main obstacle impeding their clinical translation. To elucidate this problematic, we report, in this thesis, the use of breakable hybrid organosilica nanoparticles where one is mesoporous and the other one consists in a nanocapsule without porosity. Such materials have been prepared by incorporating an imine-based linker in the particles framework in order to make them pH-responsive. The advantage of the pH sensitivity relies on the fact that cancerous media present certain acidity as compared to those healthy. The particles exhibit a high pH sensitivity where, at low pH, they fully break down, while a good stability is observed in physiological conditions. Furthermore, in vitro studies performed with a drug delivery system based on the mesoporous particle and a highly hydrophobic drug show a remarkable efficiency towards a cancer cell line from human breast, which moreover, rapidly internalises the material. The nanocapsule loaded with a hydrophilic drug also demonstrates a fast internalisation towards a commonly used cancer line which does not resist to the system and thus dies by a very high rate
De, Roo Tjaard [Verfasser]. "Organic/Inorganic Semiconductor Hybrid Nanoparticles from Controlled Polymerization / Tjaard De Roo." Konstanz : Bibliothek der Universität Konstanz, 2017. http://d-nb.info/1132062187/34.
Повний текст джерелаJung, Christoph [Verfasser]. "Hybrid Nanoparticles of Conjugated Polymers with Multiple Incorporated Inorganic Semiconductor Particles / Christoph Jung." Konstanz : Bibliothek der Universität Konstanz, 2016. http://d-nb.info/1113190213/34.
Повний текст джерелаALRASHED, MAHER M. "ORGANIC/INORGANIC HYBRID COATINGS FOR ANTICORROSION APPLICATIONS." University of Akron / OhioLINK, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=akron1491226580793534.
Повний текст джерелаChou, Berryinne. "Nano-Scale Modified Inorganic/Organic Hybrid Materials as Proton Conductors." Case Western Reserve University School of Graduate Studies / OhioLINK, 2006. http://rave.ohiolink.edu/etdc/view?acc_num=case1144419661.
Повний текст джерелаOkada, Hiroshi. "Development of Functional Materials Based on Organic-Inorganic Hybrids." 京都大学 (Kyoto University), 2014. http://hdl.handle.net/2433/188609.
Повний текст джерелаDuan, Yannan. "Fundamental Studies on Polymer and Organic-Inorganic Hybrid Nanoparticles Reinforced Silica Aerogels." University of Akron / OhioLINK, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=akron1333079860.
Повний текст джерелаMillsaps, Caitlin. "Deposition of platinum particles on surface-modified carbon ultramicroelectrodes." Digital Commons @ East Tennessee State University, 2019. https://dc.etsu.edu/honors/639.
Повний текст джерелаWalther, Andreas. "Soft compartmentalized polymer colloids : janus particles, multicompartment structures, inorganic-organic hybrids and applications." kostenfrei, 2008. http://opus.ub.uni-bayreuth.de/volltexte/2008/496/.
Повний текст джерелаBeaver, Melinda R. "Laboratory investigations of mixed organic/inorganic particles: Ice nucleation and optical hygroscopic growth." Connect to online resource, 2008. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&res_dat=xri:pqdiss&rft_dat=xri:pqdiss:3337075.
Повний текст джерелаAkinsiku, Sileola B. "Detecting Organic Molecules on the Surface of Inorganic Dust Particles Using Aerosol Mass Spectrometry." DigitalCommons@USU, 2009. https://digitalcommons.usu.edu/etd/369.
Повний текст джерелаLisowski, Carmen Ellen 1978. "Hybrid organic/inorganic nanomaterials: Development of malonamide-functionalized nanoparticles designed for lanthanide ion detection." Thesis, University of Oregon, 2010. http://hdl.handle.net/1794/10523.
Повний текст джерелаHybrid nanoscale complexes incorporate the attributes of organic and inorganic components to yield novel multifunctional materials. Because the individual components themselves and the combinations used can be widely varied to tune the properties of the resulting complex, the potential for new properties and practical applications is nearly limitless. However, widespread use of these materials relies on appropriate design, synthesis and characterization strategies to ensure proper function and compositional integrity. This dissertation describes the chemistry of these hybrids, made possible by combining organic ligands, inorganic nanoparticles, and metal ions, and the interesting optical and spectroscopic properties associated with the hybrid nanomaterials. Organic ligands containing Bunte salt and acyclic malonamide functionalities were attached to gold nanoparticles to produce colorimetric sensors for lanthanide ion detection. Bunte salt functionality stabilizes the gold core and malonamide functionality offers selective and sensitive lanthanide ion binding. The binding interaction controls a nanoparticle cross-linking event that changes the color of the nanoparticle solution, resulting in visual, colorimetric lanthanide ion detection. Next, the concentration of malonamide ligand was diluted and replaced with a diluent ligand yielding nanoparticles stabilized with a mixed ligand composition. The mixed ligand environment makes the optical response of the colorimetric sensor reversible. Furthermore, the use of Bunte salt ligands during nanoparticle synthesis has allowed the investigation of the role of reducing agent on nanoparticle stability. In addition to exploring interactions pertaining to gold nanoparticle complexes, a new approach to sensitize europium ion luminescence was developed by fabricating a zinc oxide/europium complex. A molecular linker permits simultaneous zinc oxide nanoparticle functionalization and trivalent europium binding in order to tether the europium ion close to the nanoparticle surface. The zinc oxide nanoparticle can then act as an inorganic antenna, transferring energy to the europium ion and enhancing its luminescence. Finally, a strategy was developed to synthesize bifunctional bicyclic malonamides. Synthesis of these ligands allows the enhanced f-block ion binding affinity of bicyclic malonamides to be incorporated into functional materials to compare their performance to our previously prepared acyclic malonamide hybrid complexes. This dissertation includes my previously published and co-authored materials.
Committee in charge: Darren Johnson, Chairperson, Chemistry; James Hutchison, Advisor, Chemistry; Catherine Page, Member, Chemistry; Michael Haley, Member, Chemistry; Barbara Roy, Outside Member, Biology
Tkacheva, T. N., S. L. Yefimova, V. K. Klochkov, A. V. Sorokin, and Yu V. Malyukin. "Spectroscopic Study of Cationic Carbocyanine Dye Binding to GdYVO4:Eu Nanoparticles." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/35005.
Повний текст джерелаHuang, Shu-Chen. "Controlled mineralization of organic-inorganic calcium carbonate composite particles by use of water-soluble polymers." 京都大学 (Kyoto University), 2008. http://hdl.handle.net/2433/136308.
Повний текст джерелаYazdi, Amirali. "Nanoengineering composites made of metal- and covalent- organic frameworks and inorganic nanoparticles using encapsulation techniques." Doctoral thesis, Universitat Autònoma de Barcelona, 2018. http://hdl.handle.net/10803/666772.
Повний текст джерелаThe present PhD Thesis has been dedicated to the design and synthesis of a new type of composites of metal-organic frameworks (MOFs) or covalent-organic frameworks (COFs) with inorganic nanoparticles (iNPs) and the use of these composites for heterogeneous catalysis. In the first chapter, we introduce the family of composites made by supporting iNPs on/in different materials, focusing on those constructed with MOFs and COFs. Then, the general objectives of the Thesis are described in Chapter 2. Chapter 3 shows the results in “The influence of the MOF shell thickness on the catalytic performance of composites made of inorganic (hollow) nanoparticles encapsulated into MOFs”, Catalysis Science & Technology (2016). Herein, we report the encapsulation of hollow Pt or Pd nanoparticles (NPs) into ZIF-8, making a series of composites in which the ZIF-8 shell thickness has been systematically varied. By using these composites as catalysts for the reduction of 4-nitrophenol and Eosin Y, we show that the MOF shell thickness plays a key role in the catalytic performance of this class of composites. In Chapter 4, hybrid core-shell Au/CeO2 NPs dispersed in UiO-66 shaped into microspherical beads are created using the spray-drying continuous-flow method. The combined catalytic properties of nanocrystalline CeO2 and Au in a single particle and the support and protective function of porous UiO-66 beads make the resulting composites show good performances as catalysts for CO oxidation (T50 = 72 °C; T100 = 100 °C) and recyclability. The results are included in the manuscript entitled “Core-shell Au/CeO2 nanoparticles supported in UiO-66 beads exhibiting full CO conversion at 100 °C”, Journal of Materials Chemistry A (2017). Finally, in Chapter 5, we demonstrated a two-step method that enables imparting new functionalities to COFs by nanoparticle confinement. The direct reaction between 1,3,5-tris(4-aminophenyl)benzene and 1,3,5-benzenetricarbaldehyde in the presence of a variety of metallic/metal-oxide nanoparticles resulted in the embedding of the nanoparticles in amorphous and nonporous imine-linked polymer organic spheres. Post-treatment reactions of these polymers with acetic acid under reflux led to crystalline and porous imine-based COF- hybrid spheres. Interestingly, porous imine-based COF-hybrids with Au and Pd NPs were found to be catalytically active. These results have been reported in the publication entitled “Confining Functional Nanoparticles into Colloidal Imine-Based COF Spheres by a Sequential Encapsulation-Crystallization Method”. Chemistry a European Journal (2017).
Kaiser, Tina Katarina [Verfasser]. "Treatment of acute Graft-versus-Host Disease using inorganic-organic hybrid nanoparticles / Tina Katarina Kaiser." Göttingen : Niedersächsische Staats- und Universitätsbibliothek Göttingen, 2019. http://d-nb.info/1222265001/34.
Повний текст джерелаGunawidjaja, Ray. "Organic/inorganic nanostructured materials towards synergistic mechanical and optical properties /." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/29733.
Повний текст джерелаCommittee Chair: Tsukruk, Vladimir; Committee Member: Bucknall, David; Committee Member: Kalaitzidou, Kyriaki; Committee Member: Shofner, Meisha; Committee Member: Tannenbaum, Rina. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Borteh, Hassan. "Micropatterning of Functional Inorganic Materials with Benign Chemistry Using Peptide Catalysts." The Ohio State University, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=osu1276883108.
Повний текст джерелаGirard, Anaëlle. "Matériaux hybrides organique-inorganique à base de résine et de particules d'oxydes : application dans les panneau photovoltaïques." Thesis, Bordeaux, 2014. http://www.theses.fr/2014BORD0064/document.
Повний текст джерелаIn the current energetic context, the design of efficient solar photovoltaic panels represents one of the solutions to overcome the coming fossil fuels shortage. However, degradation phenomena of the encapsulant, one of the passive materials of the panel, have been evidenced as one of the reasons of the performance decrease. The aim of this PhD research work was to design, characterize and assess the different properties of more environment-friendly new hybrid organic-inorganic encapsulants. In this way, three materials have been developed using polyvinyl alcohol (PVA), terpenic resins and mineral fillers (silica or clay(Bentonite)). A first material including PVA, resin and silicates, in which both organic and inorganic networksare linked through strong covalent bonds (class II hybrid material), led to thermal and photochemical stabilities, and water vapor and oxygen barriers properties similar to those of commercial encapsulants.Dispersion of silica nanoparticles into PVA/terpenic resin mixture through weak bond then provided a class Ihybrid material showing rather good water vapor barrier properties but optical transmittance too low to beused as an encapsulant, due to the aggregation of the nanoparticles. Finally, despite an optical transparency that should be optimized, a class I hybrid material made of PVA, resin and Bentonite showed promisingbehavior with good thermal, photochemical and water barrier properties and remarkable oxygen barrier properties, which opens up new prospects in the field of food packaging
Gawlitza, Kornelia [Verfasser], and Regine von [Akademischer Betreuer] Klitzing. "P-NIPAM microgels as stimuli responsive matrix for embedding functional inorganic and organic particles / Kornelia Gawlitza. Betreuer: Regine von Klitzing." Berlin : Universitätsbibliothek der Technischen Universität Berlin, 2012. http://d-nb.info/1029355584/34.
Повний текст джерелаVadlamudi, Mallika. "Lipid-coated Magnesium Phosphate Nanoparticles for Intrapulmonary Protein Delivery in Mice." Scholarly Commons, 2019. https://scholarlycommons.pacific.edu/uop_etds/3631.
Повний текст джерелаHuong, Thi Thanh Tong. "Boron coordination and co-incorporation of Al, Ga in *BEA borosilicate and dissolution of zeolite nanoparticles from large particles in organic solvents." [S.l.] : [s.n.], 2007. http://deposit.ddb.de/cgi-bin/dokserv?idn=985295201.
Повний текст джерелаJoo, Minjung. "Silane terminated macromonomers with nanoparticles and surface segregation of fluorinated moieties." University of Akron / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=akron1478876813425998.
Повний текст джерелаBersani, Marco. "Chemical methods for the preparation of gold particles based nanostructures and nanocomposites." Doctoral thesis, Università degli studi di Padova, 2008. http://hdl.handle.net/11577/3425973.
Повний текст джерелаLohe, Martin R., Kristina Gedrich, Thomas Freudenberg, Emanuel Kockrick, Til Dellmann, and Stefan Kaskel. "Heating and separation using nanomagnet-functionalized metal–organic frameworks." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-138610.
Повний текст джерелаDieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich
Lohe, Martin R., Kristina Gedrich, Thomas Freudenberg, Emanuel Kockrick, Til Dellmann, and Stefan Kaskel. "Heating and separation using nanomagnet-functionalized metal–organic frameworks." Royal Society of Chemistry, 2011. https://tud.qucosa.de/id/qucosa%3A27764.
Повний текст джерелаDieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.
Al-Saadi, Ali. "Preparation and characterisation of encapsulation magnetic metal iron oxide nanoparticles." Thesis, University of Oxford, 2012. http://ora.ox.ac.uk/objects/uuid:57bdcf38-9d45-48ab-a971-a2d60e2e4391.
Повний текст джерелаLlopis, Lorente Antoni. "Enzyme-functionalized hybrid mesoporous nanodevices for sensing, controlled release and molecular communication." Doctoral thesis, Universitat Politècnica de València, 2019. http://hdl.handle.net/10251/117612.
Повний текст джерела[CAT] La present tesi doctoral titulada "Nanodispositius mesoporosos híbrids funcionalitzats amb enzims per a detecció, alliberació controlada i comunicació molecular" es centra en el disseny, preparació, caracterització i avaluació de distints nanodispositius híbrids orgànic-inorgànics utilitzant com a suport nanopartícules tipus Janus d'or i sílice mesoporosa, que s'equipen amb enzims, espècies fluorescents i portes moleculars. Com a conclusió general, els estudis realitzats mostren que la incorporació d'enzims sobre nanopartícules permeten introduir funcions de reconeixement amb alta especificitat i dissenyar nanodispositius avançats per a distintes finalitats. La combinació de nanopartícules híbrides amb grups orgànics com portes moleculars, efectors enzimàtics i espècies cromo-fluorogèniques o fàrmacs pot resultar molt versàtil; i s'espera que els resultats obsessos inspiren el desenvolupament de nous materials intel·ligents amb aplicació en distintes àrees com la nanomedicina i la detecció de molècules d'interés.
[EN] This PhD thesis entitled "Enzyme-functionalized hybrid mesoporous nanodevices for sensing, controlled release and molecular communication" is focused on the design, synthesis, characterization and evaluation of several hybrid organic-inorganic nanodevices using Janus gold-mesoporous silica nanoparticles as scaffolds, equipped with enzymes, fluorescent species and molecular gates. In conclusion, these studies show that the incorporation of enzymes on nanoparticles allows to introduce recognition capabilities with high specificity and to design advanced nanodevices for different purposes. The combination of hybrid nanoparticles with organic groups such as molecular gates, enzymatic effectors and chromo-fluorogenic species or drugs can be very versatile; and we hope that the obtained results inspire the development of new smart materials with application in different areas such as nanomedice and sensing.
Llopis Lorente, A. (2019). Enzyme-functionalized hybrid mesoporous nanodevices for sensing, controlled release and molecular communication [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/117612
TESIS
Freitas, Jilian Nei de. "Celulas fotovoltaicas hibridas de polimeros condutores e nanoparticulas inorganicas." [s.n.], 2009. http://repositorio.unicamp.br/jspui/handle/REPOSIP/248441.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Instituto de Quimica
Made available in DSpace on 2018-08-14T17:00:59Z (GMT). No. of bitstreams: 1 Freitas_JilianNeide_D.pdf: 8511541 bytes, checksum: 16cafd5a8e1e1563c206ffa381e7c35a (MD5) Previous issue date: 2009
Resumo: Este trabalho consistiu no desenvolvimento e caracterização de materiais para aplicação em células fotovoltaicas híbridas. No Capítulo I, uma introdução geral sobre o funcionamento e estado da arte de células solares, e sobre as propriedades de polímeros condutores e nanopartículas inorgâncias é apresentada. O Capítulo II contém os objetivos deste trabalho. No Capítulo III, foram investigados novos polímeros condutores, baseados na combinação de unidades fluoreno com unidades tiofeno e/ou benzeno. As propriedades fotofísicas, eletroquímicas e de transporte de cargas foram caracterizadas, e esses polímeros foram então combinados com um derivado solúvel de fulereno (PCBM) e os compósitos formados (heterojunção) foram aplicados em células solares com configuração ITO | PEDOT:PSS | Heterojunção | LiF | Al. A seguir, foram sintetizadas nanopartículas de CdSe com diferentes tamanhos, usando um método descrito na literatura. Essas partículas foram caracterizadas por medidas de absorção e emissão, voltametria cíclica (VC), difração de Raios-X (DRX) e microscopia eletrônica de transmissão (TEM), conforme apresentado no Capítulo IV. Os polímeros investigados inicialmente foram combinados com as nanopartículas de CdSe, e esses materiais foram utilizados na montagem de células solares híbridas. De modo geral, os dispositivos apresentaram valores baixos de fotocorrente, o que foi atribuído ao fato de as nanopartículas inorgânicas não transportarem elétrons de forma efetiva nesses dispositivos. A seguir, propôs-se um novo sistema, em que a heterojunção constitui na mistura ternária polímero/CdSe/PCBM. Esses dispositivos foram caracterizados por curvas de corrente-potencial e pela resposta espectral do sistema, mostrando resultados extremamente promissores. Os sistemas ternários foram então investigados por diversas técnicas, como absorção, emissão, DRX, VC, TEM e microscopia de força atômica, a fim de determinar a atuação de cada componente da mistura ternária quando aplicados nas células solares. Esses resultados são apresentados no Capítulo V. No Capítulo VI, novos polímeros condutores derivados do polifluoreno, contendo unidades funcionais como grupos piridina, ou compostos aromáticos do tipo "push-pull", foram sintetizados pelo método de Gilch. A estrutura desses polímeros foi desenhada visando sua aplicação nas células híbridas, combinandoos com as nanopartículas de CdSe previamente sintetizadas. Esses materiais foram caracterizados por ressonância magnética nuclear de hidrogênio, espectroscopia no Infravermelho com transformada de Fourier. cromatografia por permeação em gel, análises térmicas e medidas eletroquímicas e de fotofísica. No Capítulo VII, propôs-se a introdução de um corante orgânico comercial (Disperse Red 1), como terceiro componente em uma mistura de poli(fluorenilenovinileno) e PCBM, visando aumentar a absorção de luz pela camada ativa do dispositivo. Foi realizado um extenso estudo usando técnicas fotofísicas e eletroquímicas para investigar o efeito da adição do corante, bem como determinar quais os tipos de processos (transferência de elétrons ou energia) ocorrem no sistema ternário. Finalmente o Capítulo VIII contém as principais conclusões deste trabalho e perspectivas de continuação para esta linha de pesquisa.
Abstract: This PhD Thesis investigated the development and characterization of new materials aiming at the application in hybrid solar cells. In Chapter I, a general introduction on the working principles and state-of-the-art of the organic solar cells, properties of the conducting polymers and the inorganic nanoparticles are presented. Chpater II highlights the aims of this work. In Chapter III, new conducting polymers based on the combination of fluorene, thiophene and/or benzene units are investigated. The photophysical and electrochemical characteristics, and charge mobility, are discussed. The polymers were also combined with a soluble fullerene derivative (PCBM) and these composites were used as active layer in bulk-heterojunction solar cells with the following configuration: ITO | PEDOT:PSS | Heterojunction | LiF | Al. Then, CdSe nanoparticles with different sizes were synthesized using a well-established method, and characterized using absorption and emission measurements, cyclic voltammetry (CV), X-ray diffraction (XRD) and transmission electron microscopy (TEM), as presented in Chapter IV. The previously characterized polymers were combined with the CdSe nanoparticles, and the nanocomposites were used to assemble hybrid solar cells. The devices showed very low photocurrent values, which were attributed to a poor electronic transport in the nanoparticles phase. Thus, a new system was suggested, based on a mixture of polymer/CdSe/PCBM. The photocurrent-potential curves and spectral response of the devices assembled with the ternary systems were evaluated, leading to very promising results. The absorption, emission, XRD, CV, TEM and atomic force microscopy measurements of the films were also performed to investigate/elucidate the role of each component in the ternary systems, as discussed in Chapter V. In Chapter VI, new conducting polymers based on poly(fluorenylenevinylene) containing functional units, such as pyridine or push-pull type aromatic units, were synthesized via the Gilch route. The structures of these materials were designed aiming at their application in hybrid solar cells, in combination with the previously synthesized CdSe nanoparticles. The polymers were characterized by magnetic nuclear resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, and thermal, electrochemical and photophysical measurements. These polymers were combined with CdSe and/or PCBM and used as active layer in solar cells. In Chapter VII the addition of the commercial organic dye Disperse Red 1 in the mixture of poly(fluorenylenevinylene)/PCBM to enhance the light absorption in the active layer was investigated. A systematic study using photophysical and electrochemical measurements was performed in order to elucidate the effect of the dye addition, as well as the energy or electron transfer processes in this new ternary system. Finally, Chapter VIII summarizes the main conclusions of this work and highlights some perspectives for this exciting research filed.
Doutorado
Quimica Inorganica
Doutor em Ciências
Haverinen, H. (Hanna). "Inkjet-printed quantum dot hybrid light-emitting devices—towards display applications." Doctoral thesis, University of Oulu, 2010. http://urn.fi/urn:isbn:9789514261275.
Повний текст джерелаPessina, Florent. "Toward particle size reduction by spray flash evaporation : the case of organic energetic crystals and cocrystals." Thesis, Strasbourg, 2016. http://www.theses.fr/2016STRAE031/document.
Повний текст джерелаThe continuous formation of nanosized energetic material is a long-standing challenge. Spray Flash Evaporation (SFE) is a major technique, internally developed and patented, for continuously producing energetic materials at submicron or nano scale; it relies on the superheating of a solvent sprayed into vacuum and thus flashing. This present research project aims to understand and control the crystallisation occurring in the SFE process. RDX and the cocrystal CL-20:HMX 2:1 was studied overcome the limited in situ characterizations also. The supersaturation is a function of time and space in SFE, linked to the size distribution and velocity of droplets. Supersaturation was raised with an anti-solvent and by the enhancement of the SFE with a dual nozzle system. Then PVP 40K and PEG 400 were successfully used to alter the nucleation and the growth. The particles were subsequently tuned from 160 nm spheres to 5 µm grains and were less sensitive, especially toward electrostatic discharge
Camilo, Ruth Luqueze. ""Síntese e caracterização de nanopartículas magnéticas de ferrita de cobalto recobertas por 3-aminopropiltrietoxissilano para uso como material híbrido em nanotecnologia"." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-27092006-135110/.
Повний текст джерелаNowadays with the appear of nanoscience and nanotechnology, magnetic nanoparticles have been finding a variety of applications in the fields of biomedicine, diagnosis, molecular biology, biochemistry, catalysis, etc. The magnetic functionalized nanoparticles are constituted of a magnetic nucleus, involved by a polymeric layer with active sites, which ones could anchor metals or selective organic compounds. These nanoparticles are considered organic-inorganic hybrid materials and have great interest as materials for commercial applications due to the specific properties. Among the important applications it can be mentioned: magnetohyperthermia treatment, drugs delivery in specific local of the body, molecular recognition, biossensors, enhancement of nuclear magnetic ressonance images quality, etc. This work was developed in two parts: 1) the synthesis of the nucleus composed by superparamagnetic nanoparticles of cobalt ferrite and, 2) the recovering of nucleus by a polymeric bifunctional 3-aminepropyltriethoxysilane. The parameters studied in the first part of the research were: pH, hydroxide molar concentration, hydroxide type, reagent order of addition, reagent way of addition, speed of shake, metals initial concentrations, molar fraction of cobalt and thermal treatment. In the second part it was studied: pH, temperature, catalyst type, catalyst concentration, time of reaction, relation ratios of H2O/silane, type of medium and the efficiency of the recovering regarding to pH. The products obtained were characterized using the following techniques X-ray powder diffraction (DRX), transmission electronic microscopy (MET), scanning electronic microscopy (MEV), spectroscopy of scatterbrained energy spectroscopy (DES), atomic emission spectroscopy (ICP-AES), themogravimetric analysis (TGA/DTGA), Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and magnetization curves (VSM)
Knapp, Amanda R. "Antimicrobial and Antitumor Properties of Free and Poly(Ethylene Glycol)-Poly(Lactic Acid) Encapsulated Silver N-Heterocyclic Carbene Complexes." University of Akron / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=akron1309211795.
Повний текст джерелаDiazgomez, Trevino Ana Paola. "Élaboration de matériaux hybrides organiques-inorganiques à base de nanoparticules de TiO₂ : modification et étude de la composante organique." Thesis, Paris 13, 2019. http://www.theses.fr/2019PA131080.
Повний текст джерелаTiO₂-based nanoparticulate organic-iniorganic hybrid materials with the organic component consisting of co-polymers were prepared. A successful association of hydrophobic and hydrophilic organics makes the hybrid solutions stable against atmospheric moisture and preserved single nanoparticle morphology at high inorganics concentrations up to 3 mol/l Ti over a week. The compositional modifications of the hybrids were investigated at the solvent exchange and polymerization stages of preparation. It was shown that the inorganic nanoparticles retain solvent molecules at the surface even at high temperatures above boiling point (up to the organics decomposition temperature). The nanoparticles also catalyze the organics decomposition shifting this process to lower temperatures. The major products of HEMAisopropanol decomposition were assigned to 2-methyl propionic acid and 2-hydroxy ethyl acetate and methyl methacrylate, which last was also observed as the synthesis impurity. The quantities of the released species were proportional to the nanoparticles concentration. The TEM measurements evidenced unprecedently homogenous distribution of the smallest nanoparticles of the size 3.0 nm previously assigned to nucleus, which serves as elementary building block of TiO₂ solids. These findings have to be taken into consideration by investigating electronic properties of the materials and determining their application fields. We evaluated availability of the obtained nanoparticulate organic-inorganic hybrid materials for micromashining via DLW (2PP) processing
Rivoal, Morgane. "Préparation et caractérisation de nouveaux éléments pour la conception de nanohybrides organiques /inorganiques." Thesis, Aix-Marseille, 2012. http://www.theses.fr/2012AIXM4075/document.
Повний текст джерелаCurrently, the development of organic/inorganic nanohybrid materials arouses the enthusiasm of many researchers owing to their potential applications. The aim of this thesis was to prepare and characterize new inorganic and organic components for the future design of new multi-functional nanohybrids with properties responding to the current challenges. For this purpose, we have prepared nanoparticles of zinc oxide (ZnO) as the inorganic component by laser ablation. The surface of these nanoparticles can be modified by an organic component bearing the carboxylic group as an anchor. We synthesized and characterized a number of viologen derivatives, well known as strong electron acceptors, involving the anchoring groups. The nanohybrids of ZnO/viologens were prepared and characterized by various spectroscopic techniques. We have developed efficient synthetic routes toward a series of new heterocycles possessing the electron donating properties: derivatives of dibenzo[2,3:5,6]pyrrolizino[1,7-bc]indolo[1,2,3-lm]carbazole. These new molecules exhibit high thermal stability and strong fluorescence in the visible range. Their one- and two-photon (Near-infrared) absorption properties and electron donor ability were investigated experimentally and by means of quantum mechanical calculations. The studied organic and inorganic components can serve as promising building blocks of choice for the future development of nanohybrids used in various application domains such as in the fields of photovoltaics and medical imaging
de, Luis Fernández Beatriz. "Development of enzyme-functionalized hybrid mesoporous nanodevices for advanced chemical communication." Doctoral thesis, Universitat Politècnica de València, 2021. http://hdl.handle.net/10251/171506.
Повний текст джерела[ES] La presente tesis doctoral se centra en el diseño, síntesis y caracterización de varios nanodispositivos híbridos orgánico-inorgánicos, utilizando como soporte nanopartículas de sílice mesoporosa equipadas con enzimas y puertas moleculares, los cuales muestran capacidades comunicativas además de la evaluación de diferentes estrategias de comunicación. El primer capítulo incluye un resumen de diferentes conceptos sobre los que se fundamentan los estudios realizados tales como nanotecnología, materiales de sílice mesoporosa, materiales con puertas moleculares que reaccionan a estímulos específicos, partículas Janus y biocomputación. Finalmente, se incluyen conceptos básicos acerca de la comunicación química, materiales y estrategias empleados hasta ahora y ejemplos representativos. A continuación, en el segundo capítulo, se presentan los objetivos generales de esta tesis doctoral que son abordados en los siguientes capítulos experimentales. El tercer capítulo muestra un sistema de biocomputación para liberación basado en nanopartículas Janus de oro-sílice mesoporosa capaces de comunicarse con el entorno procesando la información e imitando la función lógica booleana propia de un demultiplexer y que resulta en la liberación controlada de la carga. Se muestra que dicho nanodispositivo puede llevar a cabo sus funciones en medios complejos como en células cancerígenas. En el cuarto capítulo, se presenta un modelo circular de comunicación dentro de una red de tres nanopartículas diferentes basado en el intercambio jerárquicamente programado de mensajes químicos. La parte mesoporosa del nanodispositivo 1 (S1βgal) es cargada con la especie fluorescente [Ru(bpy)3]Cl2 y tapada con cadenas de oligo(etilenglicol) que contienen puentes disulfuro y que funcionan como puertas moleculares, mientras que la enzima β-galactosidasa es unida a la parte del oro. En la nanopartícula 2 (S2galox), la enzima galactosa oxidasa es inmovilizada en la cara del oro mientras que la sílice mesoporosa es cargada con 4-(bromometil)benzoato de metilo y los poros tapados con un derivado de arilboronato autoinmolante sensible a H2O2 que forma un complejo huéspedanfitrión con β-ciclodextrina. Finalmente, el nanodispositivo 3 (S3est) es funcionalizado con la enzima esterasa en la parte del oro, cargada con la especie reductora hidroclururo de tris(2-carboxietil)fosfina (TCEP) en la parte mesoporosa y tapada con una nanoválvula supramolecular que responde a pH (βciclodextrina:benzimidazol). En el quinto capítulo, se muestra un modelo interactivo de comunicación química entre una nanopartícula Janus abiótica y un organismo vivo (Saccharomyces cerevisiae). En particular, el nanodispositivo está basado en nanopartículas funcionalizadas con glucosa oxidasa en la parte del oro, cargadas con el genotóxico fleomicina y tapadas con la puerta molecular sensible a pH (βciclodextrina:benzimidazol). El microorganismo usado en el estudio es una levadura modificada que expresa GFP bajo el control del promotor del gen RNR3; la transcripción de dicho gen es inducida con la exposición a agentes que dañan el ADN. La ruta de comunicación interactiva empieza con la adición de sacarosa (estímulo de entrada) la cual es hidrolizada en glucosa por la invertasa localizada en el espacio periplásmico de las levaduras y que difunde al nanodispositivo donde es trasformada en el correspondiente ácido por la glucosa oxidasa de la parte del oro. La bajada local de pH da lugar a la apertura de la nanoválvula sensible a pH del nanovehículo y con ello a la liberación de fleomicina (mensaje de vuelta) que induce la expresión de GFP (señal de salida) en las levaduras. En el sexto capítulo, proponemos una estrategia para establecer una comunicación lineal entre dos microorganismos diferentes que no interactúan entre ellos mediada por un nanodispositivo que actúa como traductor químico. Finalmente, las conclusiones generales de la presente tesis doctoral son expuestas en el capítulo siete. El estudio de las capacidades comunicativas de los nanodispositivos mesoporosos funcionalizados con enzimas permite la construcción de estrategias de cooperación entre diferentes entidades que permiten funcionalidades que van más allá que aquellas llevadas a cabo por agentes individuales.
[CA] La present tesi doctoral es centra en el disseny, síntesi i caracterització de diversos nanodispositius híbrids orgànic-inorgànics, utilitzant com a suport nanopartícules de sílice mesoporosa equipades amb enzims i portes moleculars, i que mostren capacitats comunicatives a més de l’avaluació de diferents estratègies de comunicació. El primer capítol inclou un resum de diferents conceptes sobre els quals es fonamenten els estudis realitzats com ara nanotecnologia, materials de sílice mesoporosa, materials amb portes moleculars que reaccionen a estímuls específics, partícules Janus i biocomputació. Finalment, s’inclouen conceptes bàsics sobre la comunicació química, materials i estratègies utilitzades fins ara i exemples representatius. A continuació, en el segon capítol, es presenten els objectius generals d’aquesta tesi doctoral que són abordats en els següents capítols experimentals. El tercer capítol mostra un sistema de biocomputació per alliberament basat en nanopartícules Janus d’or-sílice mesoporosa capaços de comunicar-se amb l’entorn processant la informació i imitant la funció lògica booleana pròpia d’un demultiplexer i que resulta en l’alliberament controlat de la càrrega. Es mostra que aquest nanodispositiu pot dur a terme les seves funcions en mitjans complexos com en cèl·lules canceroses. En el quart capítol, es presenta un model circular de comunicació dins d’una xarxa de tres nanopartícules diferents basat en l’intercanvi jeràrquicament programat de missatges químics. La part mesoporosa del nanodispositiu 1 (S1βgal) es carrega amb l’espècie fluorescent [Ru(bpy)3]Cl2 i es tapa amb cadenes d’oligo(etilenglicol) que contenen ponts disulfur i que funcionen com portes moleculars, mentre que l’enzim β-galactosidasa s’immobilitza a la part de l’or. A la nanopartícula 2 (S2galox), l’enzim galactosa oxidasa s’immobilitza a la cara de l’or mentre que la sílice mesoporosa es carrega amb 4-(bromometil)benzoat de metil i els porus són tapats amb un derivat d’arilboronat autoimmolant sensible a H2O2 que forma un complex hoste-amfitrió amb β-ciclodextrina. Finalment, el nanodispositu 3 (S3est) es funcionalitza amb l’enzim esterasa en la part de l’or, es carrega amb l’espècie reductora hidroclurur de tris (2-carboxietil) fosfina (TCEP) a la part mesoporosa i es tapa amb una nanoválvula supramolecular que respon a pH (β-ciclodextrina:benzimidazol). En el cinqué capítol, es mostra un model interactiu de comunicació química entre una nanopartícula Janus abiòtica i un organisme viu (Saccharomyces cerevisiae). En particular, el nanodispositiu està basat en nanopartícules funcionalitzades amb glucosa oxidasa en la part de l’or, carregades amb el genotòxic fleomicina i tapades amb la porta molecular sensible a pH (βciclodextrina:benzimidazol). El microorganisme utilitzat en l’estudi és un rent modificat que expressa GFP sota el control del promotor del gen RNR3; la transcripció d’aquest gen és induïda amb l’exposició a agents que danyen l’ADN. La ruta de comunicació interactiva comença amb l’addició de sacarosa (estímul d’entrada) la qual és hidrolitzada en glucosa per la invertasa localitzada en l’espai periplasmàtic dels rents i que difon al nanodispositiu on és transformada en el corresponent àcid per la glucosa oxidasa de la part de l’or. La baixada local de pH dona lloc a l’obertura de la nanoválvula sensible a pH del nanovehicle i amb això l’alliberament de fleomicina (missatge de tornada) que indueix l’expressió de GFP (senyal de sortida) en el rent. En el sisé capítol, proposem una estratègia per establir una comunicació lineal entre dos microorganismes diferents que no interactuen entre ells facilitada per un nanodispositiu que actua com a traductor químic. Finalment, les conclusions generals de la present tesi doctoral són exposades en el capítol set. L’estudi de les capacitats comunicatives dels nanodispositius mesoporosos funcionalitzats amb enzims permet la construcció d’estratègies de cooperació entre diferents entitats que permeten funcionalitats que van més enllà que aquelles dutes a terme per agents individuals. Esperem que els resultats obtinguts inspiren aplicacions futures en diferents àrees com ara biomedicina, nanorobots, materials que imiten la naturalesa i tecnologies de la informació.
[EN] This PhD Thesis is focused on the design, synthesis and characterization of several hybrid organic-inorganic nanodevices using mesoporous silica nanoparticles equipped with enzymes and molecular gates which display communication capabilities as well as the design and evaluation of different communication strategies. The first chapter includes an overview of the different concepts which lay the foundations of the presented studies such as nanotechnology, mesoporous silica materials, stimuli-responsive gated materials, Janus particles and biocomputing. Basic concepts of chemical communication, materials and enabling technologies employed so far and representative examples in this field are also included. Next, in the second chapter, the general objectives of this PhD Thesis that are addressed in the following experimental chapters are presented. The third chapter shows a biocomputing delivery system based on Janus gold-mesoporous silica nanoparticles capable of chemically communicating with the environment and processing the information mimicking a demultiplexer Boolean logic function which results in a programmed cargo release. Finally, it is shown that such nanodevice is operative in complex media such as cancer cells. In the fourth chapter, it is presented a circular model of communication within a network of three different nanoparticles based on the hierarchically programmed exchange of chemical messages. The mesoporous face of nanodevice 1 (S1βgal) is loaded with the fluorescent dye [Ru(bpy)3]Cl2 and capped with disulfidecontaining oligo(ethylene glycol) chains acting as gatekeepers, whereas the enzyme β-galactosidase is attached to the gold face. In nanoparticle 2 (S2galox), the enzyme galactose oxidase is immobilized on the Au face, while the mesoporous silica is loaded with methyl 4-(bromomethyl)benzoate and the mesopores capped with a H2O2-sensitive self-immolative arylboronate derivative which forms a host-guest complex with β-cyclodextrin. Finally, the nanodevice 3 (S3est) is functionalized with the enzyme esterase on the Au face, loaded with the reductive species tris(2- carboxyethyl)phosphine hydrochloride (TCEP) in the mesoporous face and capped with a pH-responsive supramolecular nanovalve (β-cyclodextrin:benzimidazole). In the fifth chapter, it is showed an interactive model of chemical communication between an abiotic Janus nanoparticle and a living organism (Saccharomyces cerevisiae). In particular, the nanodevice is based on Janus goldmesoporous silica nanoparticles functionalized with glucose oxidase on the Au face, loaded with the genotoxin phleomycin and capped with a pH-responsive (βcyclodextrin:benzimidazole) gatekeeper. The microorganism used in the studies is an engineered budding yeast that expresses GFP under the control of the RNR3 promoter; RNR3 gene transcription is induced upon exposure to DNA-damaging agents. The interactive communication pathway starts with the addition of sucrose (input) which is hydrolyzed into glucose by invertase located in periplasmic space of yeasts and diffuses to the nanodevice where it is transformed into the corresponding acid by glucose oxidase on the Au face. The local drop in pH leads to uncapping of the pH-sensitive nanovalve in the nanocarrier and the release of phleomycin (feedback messenger) that induces GFP expression (output) in yeasts. In the sixth chapter, we propose a strategy to establish linear communication between two different non-interacting microorganisms mediated by a nanodevice which acts as a chemical “nanotranslator”. Finally, the general conclusions from this PhD Thesis are presented in chapter seven. The study of communication capabilities of enzyme-functionalized mesoporous nanodevices enables the construction of strategies of cooperation between different entities allowing sophisticated functionalities that go beyond those carried out by individual agents. We hope that the obtained results inspire future applications in different areas such as biomedicine, nanorobots, life-like materials and information technologies.
The authors wish to thank the Spanish Government (projects RTI2018-100910-B-C41 and RTI2018-101599-B-C22 (MCUI/AEI/FEDER, UE), CTQ2017-87954-P), the Generalitat Valenciana (PROMETEO 2018/024), the Comunidad de Madrid (IND2017/BMD7642) and CIBER-BBN (NANOCOMMUNITY project) for support.
De Luis Fernández, B. (2021). Development of enzyme-functionalized hybrid mesoporous nanodevices for advanced chemical communication [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/171506
TESIS
Compendio
El, Sayed Shehata Nasr Sameh. "Supramolecular Chemistry: New chemodosimeters and hybrid materials for the chromo-fluorogenic detection of anions and neutral molecules." Doctoral thesis, Universitat Politècnica de València, 2015. http://hdl.handle.net/10251/52598.
Повний текст джерела[ES] Resumen La presente tesis doctoral titulada "Química supramolecular: Nuevos dosímetros químicos y materiales híbridos para la detección cromo-fluorogénica de aniones y moléculas neutras." está basada en la aplicación de principios básicos de la química supramolecular y de la ciencia de materiales en el desarrollo de sensores ópticos para aniones y moléculas neutras. El segundo capítulo de esta tesis doctoral está dedicado a la preparación de dosímetros químicos para la detección cromo-fluorogénica de fluoruro, diisopropil fluorofosfato (DFP) y sulfuro de hidrógeno. Para la detección óptica del anión fluoruro se sintetizó un derivado de piridina funcionalizado con un t-butildimetilsilil éter. En este capítulo también se describe la preparación de un dosímetro químico para la detección de DFP, que es un simulante de agentes nerviosos. Este dosímetro está basado en un estilbeno funcionalizado con una sal de piridinio que contiene grupos hidroxilo y silil éter en su estructura. Finalmente se prepararon dos familias de sensores para la detección óptica de hidrógeno sulfuro. La primera familia de sensores consiste en fluoróforos comunes funcionalizados con 2,4-dinitrofenil éteres. Los sensores preparados no presentaron una emisión de fluorescencia importante mientras que, en presencia del anión hidrógeno sulfuro, se observó un aumento significativo. La segunda familia de dosímetros también estaba compuesta por ciertos fluorofóros pero, en este caso, funcionalizados con grupos azida y sulfonilazida. Los dosimétros preparados, siguiendo esta segunda aproximación, tampoco dieron una fluorescencia significativa observándose un aumento de la misma al añadir el anión hidrógeno sulfuro. El tercer capítulo de esta tesis doctoral está dedicado a la preparación de materiales híbridos nanoscópicos funcionalizados con puertas moleculares y su aplicación en protocolos de reconocimiento. En primer lugar se preparó un material para la detección óptica de glutatión (GSH). Para ello se emplearon nanopartículas de MCM-41 mesoporosas como soporte inorgánico. Los poros del soporte fueron cargados con el colorante safranina O y la superficie externa funcionalizada con oligo(etilenglicol) conteniendo enlaces disulfuro. También se prepararon y caracterizaron varios materiales híbridos para la detección selectiva del anión hidrógeno sulfuro. En este caso también se empleó, como soporte inorgánico, sílice mesoporosa MCM-41. Los poros del soporte inorgánico fueron cargados con [Ru(bipy)3]2+ y la superficie externa funcionalizada con varios complejos macrocíclicos de Cu(II). El material sensor final fue obtenido al añadir el anion hexametafosfato, que compleja con los complejos de Cu(II), produciendo un bloqueo de los poros.
[CAT] Resum La present tesi doctoral titulada "Química supramolecular: Nous dosímetres químics i materials híbrids per a la detecció cromo-fluorogènica d'anions i molècules neutres." està basada en l'aplicació dels principis bàsics de la química supramolecular i de la ciència dels materials en el desenvolupament de sensors òptics per a anions i molècules neutres. El segon capítol d'aquesta tesi doctoral està dedicat a la preparació de dosímetres químics per a la detecció cromo-fluorogènica de fluorur, diisopropil fluorofosfat (DFP) i sulfur d'hidrogen. Per a la detecció òptica de l'anió fluorur es va sintetitzar un derivat de piridina funcionalitzat amb un t-dibutildimetilsilil èter. En aquest capítol també es descriu la preparació d'un dosímetre químic per a la detecció de DFP, que és un simulant d'agents nerviosos. Aquest dosímetre està basat en un estilbè funcionalitzat amb una sal de piridina que conté grups hidroxil i silis èter en la seua estructura. Finalment varen ser preparades dues famílies de sensors per a la detecció òptica de sulfur d'hidrogen. La primera família consisteix en fluoròfors comuns funcionalitzats amb 2,4-dinitrofenil èters. Els sensors preparats no presentaren una emissió de fluorescència significativa mentre que, en presencia de l'anió hidrogen sulfur, es va observar un augment significatiu. La segona família de dosímetres també estava composada per certs fluròfors però, en aquest cas, funcionalitzats amb grups azida i sulfonilazida. Els dosímetres preparats, seguint aquesta segona aproximació, tampoc donaren una fluorescència significativa observant-se un augment de la mateixa al afegir l'anió hidrogen sulfur. El tercer capítol d'aquesta tesi doctoral està dedicat a la preparació de materials híbrids nanoscòpics funcionalitzats amb portes moleculars i la seua aplicació en protocols de reconeixement. En primer lloc es va preparar un material per a la detecció òptica de glutatió (GSH). Per a aquest propòsit es varen emprar nanopartícules MCM-41 mesoporoses com a suport inorgànic. Els porus del suport varen ser carregats amb el colorant safranina O i la superfície externa funcionalitzada amb oligo(etilenglicol) que contenia enllaços disulfurs. També varen ser preparats i caracteritzats diversos materials híbrids per a la detecció selectiva de l'anió hidrogen sulfur. En aquest cas també es va emprar, com a suport inorgànic, sílice mesoporosa MCM-41. Els porus del suport inorgànic varen ser carregats amb [Ru(bipy)3]2+ i la superfície externa funcionalitzada amb diversos complexos macrocíclics de Cu(II). El material sensor final es va obtindre al afegir l'anió hexametafosfat, que es complexa amb macrocicles de Cu(II), produint un bloqueig dels porus.
El Sayed Shehata Nasr, S. (2015). Supramolecular Chemistry: New chemodosimeters and hybrid materials for the chromo-fluorogenic detection of anions and neutral molecules [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/52598
TESIS
Vogelson, Cullen Taylor. "Inorganic-organic materials incorporating alumoxane nanoparticles." Thesis, 2000. http://hdl.handle.net/1911/19564.
Повний текст джерела