Готові списки джерел за темами / Inorganic light-emitting diodes

Добірка наукової літератури з теми "Inorganic light-emitting diodes"

Автор: Grafiati
Опубліковано: 7 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Inorganic light-emitting diodes".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Inorganic light-emitting diodes"

1

Wang, Ming-Sheng, and Guo-Cong Guo. "Inorganic–organic hybrid white light phosphors." Chemical Communications 52, no. 90 (2016): 13194–204. http://dx.doi.org/10.1039/c6cc03184f.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Vitukhnovsky, A. G. "Hybrid Organic-Inorganic Light Emitting Diodes." EPJ Web of Conferences 103 (2015): 01012. http://dx.doi.org/10.1051/epjconf/201510301012.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Vitukhnovsky, A. G., A. A. Vashchenko, and R. B. Vasiliev. "Hybrid organic–inorganic light emitting diodes." Bulletin of the Russian Academy of Sciences: Physics 80, no. 7 (July 2016): 803–7. http://dx.doi.org/10.3103/s1062873816070236.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ermakov, O. N., M. G. Kaplunov, O. N. Efimov, I. K. Yakushchenko, M. Yu Belov, and M. F. Budyka. "Hybrid organic–inorganic light-emitting diodes." Microelectronic Engineering 69, no. 2-4 (September 2003): 208–12. http://dx.doi.org/10.1016/s0167-9317(03)00298-3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Morais, Tony Dantes de, Frederic Chaput, Khalid Lahlil, and Jean-Pierre Boilot. "Hybrid Organic-Inorganic Light-Emitting Diodes." Advanced Materials 11, no. 2 (February 1999): 107–12. http://dx.doi.org/10.1002/(sici)1521-4095(199902)11:2<107::aid-adma107>3.0.co;2-j.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sessolo, Michele, and Henk J. Bolink. "Hybrid Organic-Inorganic Light-Emitting Diodes." Advanced Materials 23, no. 16 (February 22, 2011): 1829–45. http://dx.doi.org/10.1002/adma.201004324.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Li, Ning, Ying Suet Lau, Yanqin Miao, and Furong Zhu. "Electroluminescence and photo-response of inorganic halide perovskite bi-functional diodes." Nanophotonics 7, no. 12 (November 26, 2018): 1981–88. http://dx.doi.org/10.1515/nanoph-2018-0149.

Повний текст джерела
Анотація:
AbstractIn this work, we report our efforts to develop a novel inorganic halide perovskite-based bi-functional light-emitting and photo-detecting diode. The bi-functional diode is capable of emitting a uniform green light, with a peak wavelength of 520 nm, at a forward bias of >2 V, achieving a high luminance of >103 cd/m2 at 7 V. It becomes an efficient photodetector when the bi-functional diode is operated at a reverse bias, exhibiting sensitivity over a broadband wavelength range from ultraviolet to visible light. The bi-functional diode possesses very fast transient electroluminescence (EL) and photo-response characteristics, e.g. with a short EL rising time of ~6 μS and a photo-response time of ~150 μS. In addition, the bi-functional diode also is sensitive to 520 nm, the wavelength of its peak EL emission. The ability of the bi-functional diodes for application in high speed visible light communication was analyzed and demonstrated using two identical bi-functional diodes, one performed as the signal generator and the other acted as a signal receiver. The dual functions of light emission and light detection capability, enabled by bi-functional diodes, are very attractive for different applications in under water communication and visible light telecommunications.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Lewis, R. B., D. A. Beaton, Xianfeng Lu, and T. Tiedje. "light emitting diodes." Journal of Crystal Growth 311, no. 7 (March 2009): 1872–75. http://dx.doi.org/10.1016/j.jcrysgro.2008.11.093.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Xiao, Peng, Junhua Huang, Dong Yan, Dongxiang Luo, Jian Yuan, Baiquan Liu, and Dong Liang. "Emergence of Nanoplatelet Light-Emitting Diodes." Materials 11, no. 8 (August 8, 2018): 1376. http://dx.doi.org/10.3390/ma11081376.

Повний текст джерела
Анотація:
Since 2014, nanoplatelet light-emitting diodes (NPL-LEDs) have been emerged as a new kind of LEDs. At first, NPL-LEDs are mainly realized by CdSe based NPLs. Since 2016, hybrid organic-inorganic perovskite NPLs are found to be effective to develop NPL-LEDs. In 2017, all-inorganic perovskite NPLs are also demonstrated for NPL-LEDs. Therefore, the development of NPL-LEDs is flourishing. In this review, the fundamental concepts of NPL-LEDs are first introduced, then the main approaches to realize NPL-LEDs are summarized and the recent progress of representative NPL-LEDs is highlighted, finally the challenges and opportunities for NPL-LEDs are presented.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Bolink, Henk J., Hicham Brine, Eugenio Coronado, and Michele Sessolo. "Phosphorescent Hybrid Organic-Inorganic Light-Emitting Diodes." Advanced Materials 22, no. 19 (March 8, 2010): 2198–201. http://dx.doi.org/10.1002/adma.200904018.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Inorganic light-emitting diodes"

1

White, Wade M. "Synthesis and photoluminescent properties of linear and starburst compounds based on benzimidazole, 2-(2'-pyridyl)benzimidazole and 2,2'-dipyridylamine." Thesis, Kingston, Ont. : [s.n.], 2007. http://hdl.handle.net/1974/495.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Krautz, Danny [Verfasser]. "Hybrid organic-inorganic structures for solution processed organic light emitting diodes (OLEDs) / Danny Krautz." Wuppertal : Universitätsbibliothek Wuppertal, 2014. http://d-nb.info/1053771452/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Sellappan, Raja. "Light emitting diodes based on n-type ZnO nanorods and p-type organic semiconductors." Thesis, Linköping University, Department of Science and Technology, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-11197.

Повний текст джерела
Анотація:

The aim of this thesis work was to fabricate a hybrid LED using organic-inorganic ZnO materials. The goal of the project was to get an efficient white light emission from zinc oxide (ZnO) nanorods active layer. Since most of the organic materials are good for hole mobility and most of the inorganic materials are good for electron mobility, it is possible to fabricate a high performance heterostructure electroluminescence device from organic-inorganic materials. This thesis work was an attempt towards fabricating such a high electroluminescence LED from hybrid materials in which polymer acts as a p-type material and ZnO acts as a n-type material. The growth mechanism of ZnO nanorods using low-temperature aqueous solution method has been studied and nanorods (NRs) growth was examined with scanning electron microscope (SEM). Optimum hole injection polymers have been studied. Finally, the fabricated device was characterized using parameter analyzer. The fabricated device worked as a diode i.e. it rectified current as expected and the desirable light emission has almost been achieved.

Стилі APA, Harvard, Vancouver, ISO та ін.
4

Ates, Elif Selen. "Hydrothermally Grown Zinc Oxide Nanowires And Their Utilization In Light Emitting Diodes And Photodetectors." Master's thesis, METU, 2012. http://etd.lib.metu.edu.tr/upload/12614374/index.pdf.

Повний текст джерела
Анотація:
Zinc oxide, with its direct wide bandgap and high exciton binding energy, is a promising material for optoelectronic devices. Quantum confinement effect and high surface to volume ratio of the nanowires imparts unique properties to them and makes them appealing for researchers. So far, zinc oxide nanowires have been used to fabricate various optoelectronic devices such as light emitting diodes, solar cells, sensors and photodetectors. To fabricate those optoelectronic devices, many different synthesis methods such as metal organic chemical vapor deposition, chemical vapor deposition, pulsed laser deposition, electrodeposition and hydrothermal method have been explored. Among them, hydrothermal method is the most feasible one in terms of simplicity and low cost. In this thesis, hydrothermal method was chosen to synthesize zinc oxide nanowires. Synthesized zinc oxide nanowires were then used as electrically active components in light emitting diodes and ultraviolet photodetectors. Hybrid light emitting diodes, composed of inorganic/organic hybrids are appealing due to their flexibility, lightweight nature and low cost production methods. Beside the zinc oxide nanowires, complementary poly [2- methoxy -5- (2- ethylhexyloxy) - 1,4 -phenylenevinylene] MEH-PPV and poly (9,9-di-n-octylfluorenyl-2,7-diyl) (PFO) hole conducting polymers were used to fabricate hybrid light emitting diodes in this work. Optoelectronic properties of the fabricated light emitting diodes were investigated. Zinc oxide emits light within a wide range in the visible region due to its near band edge and deep level emissions. Utilizing this property, violet-white light emitting diodes were fabricated and characterized. Moreover, to take advantage over the responsivity of zinc oxide to ultraviolet light, ultraviolet photodetectors utilizing hydrothermally grown zinc oxide nanowires were fabricated. Single walled carbon nanotube (SWNT) thin films were used as transparent electrodes for the photodetectors. Optoelectronic properties of the transparent and flexible devices were investigated. A high on-off current ratio around 260000 and low decay time about 16 seconds were obtained. Results obtained in this thesis reveal the great potential of the use of solution grown zinc oxide nanowires in various optoelectronic devices that are flexible and transparent.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Fernandes, Ricardo Liz de Castilho. "Green emitting diodes for solid state lighting." Master's thesis, Universidade de Aveiro, 2016. http://hdl.handle.net/10773/17763.

Повний текст джерела
Анотація:
Mestrado em Engenharia Física
Nos anos recentes a iluminação de estado sólido impulsionou alternativas de iluminação efí cientes e ecológicas. Os desafi os correntes envolvem o desenvolvimento de materiais emissores de luz que convertem radiação de uma determinada energia para radiação de energia mais baixa, na gama do visível. Esta tese estuda um complexo novo, Tb(NaI)3(H2O)2 onde NaI é o ácido nalidíxico, que emite na região do verde e é estável sob iluminação no ultravioleta. Este foi incorporado em materiais híbridos orgânico-inorgânico tripodais com dois pesos moleculares médios (3000 e 5000 g.mol-1, denominados t- U(3000) e t-U(5000) respetivamente) que permitem o processamento de monólitos e fi lmes com forma e espessura controlada. Estes híbridos também aumentam o rendimento quântico absoluto de emissão de 0.11 medidos para o Tb(NaI)3(H2O)2 isolado para ~0.82 após incorporação no t-U(5000). Foi também demonstrado o potencial de usar estes materiais híbridos como emissores na região verde para uso em iluminação de estado sólido através do revestimento do díodo emissor na região ultravioleta (365 nm). Este LED apresenta uma efi cácia de 1.3 lm.W􀀀1.
In the last few years, solid state light-emitting diodes (LEDs) have been driving the lighting industry towards energy e cient and environmental friendly lighting. Current challenges encompass e cient and low-cost downconverting photoluminescent phosphors with emission in the visible region. This thesis will cover a novel UV-photostable green emitting complex, Tb(NaI)3(H2O)2 where NaI is nalidixic acid, was incorporated into organic-inorganic tripodal hybrid materials with two average molecular weights (3000 and 5000 g.mol{1, termed as t- U(5000) and t-U(3000), respectively) which enable the easy shaping of monoliths and lms with controlled thickness. Moreover, the hybrid hosts boost the Tb3+ green absolute emission quantum yield from 0.11 measured for the isolated Tb(NaI)3(H2O)2 complex to 0.82 after incorporation into t-U(5000). The potential use of the hybrid materials as UV-down converting green-emitting phosphors for solid state lighting was demonstrated by means of coating a near-UV LED (365 nm). This LED shows an e cacy of 1.3 lm.W􀀀1.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Chelawat, Hitesh. "Development of hybrid organic-inorganic light emitting diodes using conducting polymers deposited by oxidative chemical vapor deposition process." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/59248.

Повний текст джерела
Анотація:
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2010.
Includes bibliographical references.
Difficulties with traditional methods of synthesis and film formation for conducting polymers, many of which are insoluble, motivate the development of CVD methods. Indeed, conjugated polymers with rigid linear backbones typically crystallize readily and overcoming the resultant heat of crystallization makes them difficult to dissolve. Poly(3,4-ethylenedioxythiophene) (PEDOT) thin films were obtained through oxidative chemical vapor deposition (oCVD) by using a new oxidant- bromine. The use of bromine eliminates any post processing rinsing step required with other oxidants like iron chloride and hence makes the process completely dry. Accelerated aging experiments show longer retention of electrical conductivity for the PEDOT films obtained using bromine as the oxidant. Conductivities as high as 380 S/cm were obtained for PEDOT films deposited using bromine as the oxidant at 80 'C, which is significantly higher than that for PEDOT films deposited using iron chloride as the oxidant at the same temperature. Cross-sectional SEM of the PEDOT films deposited using bromine on silicon trench wafers demonstrates high conformal deposition of the films. All the results show the possibility of depositing highly conducting, conformal PEDOT films on any substrate including silicon, glass, paper, plastic. One of the many applications of conducting polymer is as hole-transport layer in light emitting diode. To be competitive in the LED market, improvements in hybrid-LED quantum efficiencies as well as demonstrations of long-lived HLED structures are necessary. In this work, we consider improvement in the stability of the HLED. The device fabricated can be configured as ITO/ Poly (EDOT-co-TAA)/CdSe (ZnS)/ Au. All the materials used in the device synthesis are stable in ambient conditions and all the synthesis steps on ITO substrate are done either in air or in very moderate pressure conditions. This significantly reduces the cost of the device fabrication by obviating the need of packaging layers and ultrahigh vacuum tools. The operating voltage as low as 4.3 V have been obtained for red-LEDs. We believe that with optimization of various layers in the device, further improvements can be made. For green LEDs we obtained the characteristic IV curve of a diode, but we still need to work on getting a functioning green LED.
by Hitesh Chelawat.
S.M.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Sit, Jon Wai Yu. "Growth and characterization of organic/inorganic thin films for photonic device applications." HKBU Institutional Repository, 2015. https://repository.hkbu.edu.hk/etd_oa/179.

Повний текст джерела
Анотація:
Thin film transistors (TFTs) can be used to determine the bulk-like mobilities of amorphous semiconductors. Different organic hole transporters (HTs) are under investigation including spiro-TPD, 2TNATA, NPB and TPD which are commonly used in organic light-emitting diodes (OLEDs). In addition, we also measure the TFT hole mobilities of two iridium phosphors: Ir(ppy)3 and Ir(piq)3. These materials were grown on two different gate dielectric surfaces which were SiO2 and polystyrene (PS). On SiO2, the TFT mobilities are found to be 1-2 orders smaller than the bulk hole mobilities as evaluated independently by time-of-flight (TOF) technique. On the other hand, on PS gate dielectric layer, the TFT mobilities of these hole transporters are found to be in good agreement with TOF data. A thickness dependence measurement was carried out on TFT with PS. We found that only 10nm of organic semiconductor is sufficient for TFTs to achieve TOF mobilities. We further investigate why organic semiconductors on SiO2 have such huge reduction of mobilities. Temperature dependent mobility measurements were carried out and the data were analyzed by the Gaussian Disorder Model (GDM). We found that on SiO2 surface, when compared to the bulk values, the energetic disorders (σ) of the HTs increase and simultaneously, the high temperature limits (∞) of the carrier mobilities decrease. Both σ and ∞ contribute to the reduction of the carrier mobility. The increase in σ is related to the presence of randomly oriented polar Si-O bonds. The reduction of ∞ is topological in origin and is related to the orientations of the more planar molecules on SiO2. The more planar molecules tend to lie horizontally on the surface and such orientation is unfavorable for charge transport in TFT configuration. Hybrid organic/inorganic perovskites have emerged as an outstanding material for photovoltaic cells. In the second part of this work, we setup a repeatable perovskite recipe and optimized the system under different conditions. Under certain circumstances, a perovskite solar cell with power conversion efficiency ~9% can be achieved with PEDOT:PSS as hole transporting layer with the conventional structure.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Sahin, Tiras Kevser. "Magnetic field effect and other spectroscopies of organic semiconductor and hybrid organic-inorganic perovskite devices." Diss., University of Iowa, 2018. https://ir.uiowa.edu/etd/6495.

Повний текст джерела
Анотація:
This thesis consists of three main studies: magnetic field effects in thermally activated delayed fluorescent (TADF) organic light emitting diodes (OLEDs), magnetic field effects in bipolar and unipolar polythiophene (P3HT) devices and a study of hybrid organic/inorganic perovskite devices. Spin-dependent transport and recombination processes of spin-pair species have been detected by magnetic field effect (MFE) technique in carbon-based semi- conductor devices. Magneto-electroluminescence (MEL) and magneto-conductivity have been measured as a function of the applied magnetic field, B, in light emitting diodes. TADF materials have been used instead of simple fluorescent materials in OLEDs. We have observed very large magnetic response with TADF materials. The second study is magnetic field effects of regio-regular P3HT based OLED devices. P3HT is a well known semiconducting polymer, and its electrical properties such as magneto-conductance can be affected by an applied magnetic field. P3HT was chosen because it exhibits a sign change in magnetoresistance (MR) as the bias is increased. Unipolar and bipolar devices have been fabricated with different electrode materials to understand which model can be best to explain organic magnetoresistance effect, possibly depending on the operating regime of the device. Transport and luminescence spectroscopies were studied to isolate the different mechanisms and identify their fingerprints. The third study is on hybrid organic-inorganic perovskite devices. With the potential of achieving very high efficiencies and the very low production costs, perovskite solar cells have become commercially attractive. Scanning electron microscopy (SEM) images and absorption spectrum of the films were compared in single-step solution, two-step solution and solution-assisted vapor deposition techniques. Grain size, morphology and thickness parameters of perovskite films were studied within these techniques. Perovskite solar cells were fabricated and their efficiencies were measured.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Leysour, de Rohello Erwan. "Synthèse et étude des propriétés luminescentes de composés carbodiimides en vue d’application comme luminophores pour diodes blanches." Thesis, Rennes 1, 2020. http://www.theses.fr/2020REN1S062.

Повний текст джерела
Анотація:
Le rôle que joue l’azote sur les propriétés luminescentes de centres luminescents (effet néphélauxétique, champ cristallin) a déjà été largement démontré dans les matériaux (oxy)nitrures. Ce travail de thèse s’inscrit dans la recherche de nouveaux luminophores azotés, les carbodiimides inorganiques, pour une application diodes blanches. Ainsi, une méthode de synthèse polyvalente à partir de nitrure de carbone a été développée pour la synthèse de différents composés carbodiimides dopés par des ions terres rares ou de métaux de transition. Les propriétés structurales et optiques des composés SrCN2 :Eu2+ (λem = 620 nm ; rouge), CaCN2 :Mn2+ (λem = 680 nm ; rouge), CaCN2 : Ce3+ (λem = 462 nm ; bleue) et ZnCN2 :Mn2+ (λem = 585 nm ; orange) sont discutées. La modulation de l’émission du bleu au rouge est rendue possible par un co-dopage Ce3+/Mn2+ dans CaCN2. La luminescence intrinsèque bleue de ZnCN2 est également reportée
The role that nitrogen plays on the luminescent properties of luminescent centers (nephelauxetic effect, crystal field) has already been widely demonstrated in (oxy)nitride materials. This thesis work focuses on the search of new nitrogen-containing phosphors, i.e. inorganic carbodiimides, for WLED applications. Thus, a versatile synthesis method based on carbon nitride has been developed for the synthesis of various carbodiimide compounds doped with rare earth or transition metal ions. The structural and optical properties of SrCN2 :Eu2+ (λem = 620 nm ; red), CaCN2 :Mn2+ (λem = 680 nm ; red), CaCN2 :Ce3+ (λem = 462 nm ; blue) and ZnCN2 :Mn2+ (λem = 585 nm ; orange) compounds are discussed. The modulation of the emission from blue to red is made achiveable by Ce3+/Mn2+ co-doping in CaCN2. The intrinsic blue luminescence of ZnCN2 is also reported
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Liu, Ying. "Piezo-phototronics: from experiments to theory." Diss., Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/54013.

Повний текст джерела
Анотація:
The piezo-phototronics effect is the three way coupling of semiconductor properties, photonics and piezoelectricity in the same material. Research on piezo-phototronics effect has illustrated its application on various Zinc Oxide (ZnO) nanowire based devices, yet a systematical study with comprehensive theoretical model is still missing. Here we have designed experiments on wider variety of materials to investigate the mechanism of the piezo-phototronics effect, and then built up a theoretical model for more thorough understanding. Experimental results are shown for Cadmium Sulfide (CdS) photodetectors for visible light detection, inorganic/organic hybrid Light Emitting Diodes (LEDs) and LED arrays, and it is demonstrated that strain can significantly tune the performance of these optoelectronic devices. Theoretical methodologies are proposed for Metal-Semiconductor-Metal (MSM) structure and p-n junctions, including analytical solutions and Finite Element Method (FEM) simulations. For Schottky contacts in photodetectors, barrier height change is determined as the main reason for the effect, and an exponential relationship between applied external strain and the device current is discovered, and is qualitatively confirmed from experimental results. For p-n junctions in LEDs, change in size of depletion region under strain is credited for the current change, and a charge channel is predicted for large strain, which gives explanation for the observed gigantic enhancement of light emission efficiency in experiments.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Inorganic light-emitting diodes"

1

Subash, T. D., J. Ajayan, and Wladek Grabinski. Organic and Inorganic Light Emitting Diodes. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

ZnO bao mo zhi bei ji qi guang, dian xing neng yan jiu. Shanghai Shi: Shanghai da xue chu ban she, 2010.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Park, Nam-Gyu, and Hiroshi Segawa. Multifunctional Organic-Inorganic Halide Perovskite: Applications in Solar Cells, Light-Emitting Diodes, and Resistive Memory. Jenny Stanford Publishing, 2022.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Park, Nam-Gyu, and Hiroshi Segawa. Multifunctional Organic-Inorganic Halide Perovskite: Applications in Solar Cells, Light-Emitting Diodes, and Resistive Memory. Jenny Stanford Publishing, 2022.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Park, Nam-Gyu, and Hiroshi Segawa. Multifunctional Organic-Inorganic Halide Perovskite: Applications in Solar Cells, Light-Emitting Diodes, and Resistive Memory. Jenny Stanford Publishing, 2022.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Inorganic light-emitting diodes"

1

Kim, Young-Hoon, Soyeong Ahn, Joo Sung Kim, and Tae-Woo Lee. "Halide Perovskite Light-Emitting Diodes." In Multifunctional Organic-Inorganic Halide Perovskite, 187–220. New York: Jenny Stanford Publishing, 2022. http://dx.doi.org/10.1201/9781003275930-8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Morii, Katsuyuki, and Hirohiko Fukagawa. "Hybrid Organic-Inorganic Light-Emitting Diode." In Air-Stable Inverted Organic Light-Emitting Diodes, 5–12. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-18514-5_2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Muchahary, Deboraj, Sagar Bhattarai, Arvind Sharma, and Ajay Kumar Mahato. "Fundamental Physics of Light Emitting Diodes." In Organic and Inorganic Light Emitting Diodes, 1–50. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Manikandan, M., G. Dhivyasri, D. Nirmal, Joseph Anthony Prathap, and Binola K. Jebalin. "Light Extraction Efficiency Improvement Techniques in Light-Emitting Diodes." In Organic and Inorganic Light Emitting Diodes, 117–32. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577-6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Bhaskar, Seemesh, and Sai Sathish Ramamurthy. "Performance Enhancement of Light Emitting Radiating Dipoles (LERDs) Using Surface Plasmon-Coupled and Photonic Crystal-Coupled Emission Platforms." In Organic and Inorganic Light Emitting Diodes, 161–84. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577-8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Radhika Patnala, Tulasi, N. Hemalatha, Sankararao Majji, and M. Sundar Rajan. "Physical Mechanisms That Limit the Reliability of LEDs." In Organic and Inorganic Light Emitting Diodes, 51–66. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577-2.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Subramaniyam, Vinodhini, B. A. Saravanan, and Moorthi Pichumani. "Scattering Effects on the Optical Performance of LEDs." In Organic and Inorganic Light Emitting Diodes, 67–89. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577-3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Ajayan, J., and T. D. Subash. "Efficiency Enhancement Techniques in Flexible and Organic Light-Emitting Diodes." In Organic and Inorganic Light Emitting Diodes, 133–60. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577-7.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Majidzadeh, Nesa, and Hossein Movla. "Challenges in Fabrication and Packaging of LEDs." In Organic and Inorganic Light Emitting Diodes, 91–105. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577-4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Shalu, C. "Opportunities and Challenges in Flexible and Organic LED." In Organic and Inorganic Light Emitting Diodes, 107–16. Boca Raton: CRC Press, 2023. http://dx.doi.org/10.1201/9781003340577-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Inorganic light-emitting diodes"

1

Giebink, Noel C. "Toward organic-inorganic hybrid perovskite laser diodes (Conference Presentation)." In Organic Light Emitting Materials and Devices XXII, edited by Franky So, Chihaya Adachi, and Jang-Joo Kim. SPIE, 2018. http://dx.doi.org/10.1117/12.2318726.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Lee, Tae-Woo. "High-efficiency Organic-inorganic Perovskite Light-emitting Diodes." In Solid-State Lighting. Washington, D.C.: OSA, 2016. http://dx.doi.org/10.1364/ssl.2016.ssm2c.3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Chen, K. J., Y. C. Lai, B. C. Lin, C. C. Lin, S. H. Chiu, Z. Y. Tu, M. H. Shih, et al. "Hybrid White Light-emitting Diodes by Organic-Inorganic materials." In CLEO: Applications and Technology. Washington, D.C.: OSA, 2015. http://dx.doi.org/10.1364/cleo_at.2015.jw2a.102.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Chen, Shuming. "Quantum dot light-emitting diodes with organic-inorganic hybrid charge transport layer (Conference Presentation)." In Organic and Hybrid Light Emitting Materials and Devices XXIII, edited by Franky So, Chihaya Adachi, and Jang-Joo Kim. SPIE, 2019. http://dx.doi.org/10.1117/12.2531777.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Adhikari, Gopi C., Saroj Thapa, Hongyang Zhu, and Peifen Zhu. "Modulation of optical properties of inorganic lead halide perovskites using magnesium and their applications in light-emitting diodes." In Light-Emitting Devices, Materials, and Applications XXV, edited by Martin Strassburg, Jong Kyu Kim, and Michael R. Krames. SPIE, 2021. http://dx.doi.org/10.1117/12.2577884.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Ammermann, Dirk, Achim Böhler, Christoph Rompf, and Wolfgang Kowalsky. "Double Heterostructure and Multiple Quantum Well Organic Light Emitting Diodes for Flat Panel Displays." In Organic Thin Films for Photonic Applications. Washington, D.C.: Optica Publishing Group, 1995. http://dx.doi.org/10.1364/otfa.1995.tua.3.

Повний текст джерела
Анотація:
Multilayer organic light emitting diodes (OLEDs) have recently been intensively studied [1,2] for future applications in large-area flat panel color displays. The principle of operation is similar to that of inorganic light emitting diodes (LEDs). Holes and electrons are injected from opposite electrodes into the organic layer sequence and recombine generating singlet excitons that decay radiatively. The emission layer consists of highly fluorescent organic dye molecules sandwiched between separate hole and electron transport layers. This multilayer structure allows to achieve bright electroluminescent emission in the visible spectral region at low driving voltages. We discuss the growth and characterization of high brightness double heterostructure diodes in the green spectral region and present results obtained from organic multiple quantum well light emitting diodes.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Dalton, Larry R. "Organic Optical Materials: An Overview of Scientific Issues and Applications." In Solid State Lasers: Materials and Applications. Washington, D.C.: Optica Publishing Group, 1997. http://dx.doi.org/10.1364/sslma.1997.tha1.

Повний текст джерела
Анотація:
Although historically, organic materials have not been thought of as optical materials, organics are experiencing increased use as both passive and active optical components. Applications range from passive elements such as gratings, fibers, interconnects, lens, and prisms to active components such as light emitting diodes, electro-optic modulators, solid-state lasers, frequency doublers, optical memories, and sensor protection elements. The utilization of organic materials has typically involved competition with established technology based on inorganic materials. For example, polymeric optical fibers must compete with established silica fiber technology, polymeric electro-optic modulators must compete with established lithium niobate technology, organic light emitting diodes with a host of inorganic light emitting materials, etc. Unless organics offer special advantages, they have little chance of market penetration. A frequently quoted putative general advantage of organics, and particularly polymeric materials, is their processibility and low cost. In areas such as discrete passive components, this advantage clearly comes into play and has resulted with wide commercial use. Indeed, inorganic materials such as sol-gel glasses have major difficulty in competing with polymeric materials in the manufacture of passive discrete optical components. For applications, such as electro-optic modulators and light emitting diodes, the success of organics depends on a number of properties other than materials cost or processibility although even here processibility can be an important consideration for issues such as integration with semiconductor VLSI electronics.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Gu, E., A. MackIntosh, A. Kuhne, R. A. Pethrick, C. Belton, D. D. C. Bradley, H. x. Zhang, and M. D. Dawson. "Hybrid inorganic/organic micro-structured light-emitting diodes produced by self-aligned direct writing." In 2006 IEEE LEOS Annual Meeting. IEEE, 2006. http://dx.doi.org/10.1109/leos.2006.278953.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Matsushima, T., C. Qin, K. Goushi, F. Bencheikh, T. Komino, M. Leyden, A. S. D. Sandanayaka, and C. Adachi. "Enhanced Electroluminescence from Organic Light-Emitting Diodes with an Organic-Inorganic Perovskite Host Layer." In 2019 International Conference on Solid State Devices and Materials. The Japan Society of Applied Physics, 2019. http://dx.doi.org/10.7567/ssdm.2019.a-1-02.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Nakagawa, Ryo, Yusuke Jitsui, and Naoki Ohtani. "Improvement of the EL efficiency of the inorganic-organic light-emitting diodes by Rubrene-doping." In 2014 21st International Workshop on Active-Matrix Flatpanel Displays and Devices (AM-FPD). IEEE, 2014. http://dx.doi.org/10.1109/am-fpd.2014.6867129.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Inorganic light-emitting diodes" для конкретних типів джерел:
Статті в журналах Дисертації
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії